| Age | Commit message (Collapse) | Author |
|---|
|
The Linux stack is too short. So, using recursive functions
is a very bad idea. Convert those into non-recursive ones.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Currently, there are not checks if something gets bad during
memory allocation: it will simply use NULL pointers and
crash.
Add error path at the logic which allocates memory for the
MPEG-TS generator code, propagating the errors up to the
vidtv_bridge. Now, if something wents bad, start_streaming
will return an error that userspace can detect:
ERROR DMX_SET_PES_FILTER failed (PID = 0x2000): 12 Cannot allocate memory
and the driver doesn't crash.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
- Place the includes on alphabetical order;
- get rid of asm/byteorder.h;
- add bug.h at vidtv_s302m.c, as it is needed by
inux/fixp-arith.h
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Some variables were only assigned once but were used in while
loops as if they had been updated at every iteration. Fix this.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
A few fields used only by the tone generator in the s302m encoder
are stored in struct vidtv_encoder. Move them into
struct vidtv_s302m_ctx instead. While we are at it: fix a
checkpatch warning for long lines.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The code to append a descriptor to the end of a chain is repeated
throughout the psi generator code. Extract it into its own helper
function to avoid cluttering.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Implement an Event Information Table (EIT) as per EN 300 468
5.2.4.
The EIT provides information in chronological order regarding
the events contained within each service.
For now only present event information is supported.
[mchehab+huawei@kernel.org: removed an extra blank line]
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add a Network Information Table (NIT) as specified in ETSI EN 300 468.
This table conveys information relating to the physical organization of
the multiplexes carried via a given network and the characteristics of
the network itself.
It is conveyed in the output of vidtv as packets with TS PID of 0x0010
[mchehab+huawei@kernel.org: removed an extra blank line]
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The same constant (0xffffffff) is used in three different functions.
Extract it into a #define to avoid repetition.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Currently lock gets freed only if timeout expires, but missed a
case when HW returns failure and goes for cleanup.
Fixes: efca3878a5fb ("ch_ktls: Issue if connection offload fails")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Link: https://lore.kernel.org/r/20201125072626.10861-1-rohitm@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tls_device_offload_cleanup_rx doesn't clear tls_ctx->netdev after
calling tls_dev_del if TLX TX offload is also enabled. Clearing
tls_ctx->netdev gets postponed until tls_device_gc_task. It leaves a
time frame when tls_device_down may get called and call tls_dev_del for
RX one extra time, confusing the driver, which may lead to a crash.
This patch corrects this racy behavior by adding a flag to prevent
tls_device_down from calling tls_dev_del the second time.
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20201125221810.69870-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Parav Pandit says:
====================
devlink port attribute fixes
This patchset contains 2 small fixes for devlink port attributes.
Patch summary:
Patch-1 synchronize the devlink port attribute reader
with net namespace change operation
Patch-2 Ensure to return devlink port's netdevice attributes
when netdev and devlink instance belong to same net namespace
====================
Link: https://lore.kernel.org/r/20201125091620.6781-1-parav@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When devlink reload operation is not used, netdev of an Ethernet port may
be present in different net namespace than the net namespace of the
devlink instance.
Ensure that both the devlink instance and devlink port netdev are located
in same net namespace.
Fixes: 070c63f20f6c ("net: devlink: allow to change namespaces during reload")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A netdevice of a devlink port can be moved to different net namespace
than its parent devlink instance.
This scenario occurs when devlink reload is not used.
When netdevice is undergoing migration to net namespace, its ifindex
and name may change.
In such use case, devlink port query may read stale netdev attributes.
Fix it by reading them under rtnl lock.
Fixes: bfcd3a466172 ("Introduce devlink infrastructure")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Feed kstrtou8 with NULL terminated string.
Changes since v1:
-Use sscanf to get rid of adhoc string parse.
Changes since v2:
-Check if sscanf returns 3.
Fixes: 7ea5fda2b132 ("ptp: ptp_clockmatrix: update to support 4.8.7 firmware")
Signed-off-by: Min Li <min.li.xe@renesas.com>
Link: https://lore.kernel.org/r/1606273115-25792-1-git-send-email-min.li.xe@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Two earlier bug fixes have created a security problem in the hfi1
driver. One fix aimed to solve an issue where current->mm was not valid
when closing the hfi1 cdev. It attempted to do this by saving a cached
value of the current->mm pointer at file open time. This is a problem if
another process with access to the FD calls in via write() or ioctl() to
pin pages via the hfi driver. The other fix tried to solve a use after
free by taking a reference on the mm.
To fix this correctly we use the existing cached value of the mm in the
mmu notifier. Now we can check in the insert, evict, etc. routines that
current->mm matched what the notifier was registered for. If not, then
don't allow access. The register of the mmu notifier will save the mm
pointer.
Since in do_exit() the exit_mm() is called before exit_files(), which
would call our close routine a reference is needed on the mm. We rely on
the mmgrab done by the registration of the notifier, whereas before it was
explicit. The mmu notifier deregistration happens when the user context is
torn down, the creation of which triggered the registration.
Also of note is we do not do any explicit work to protect the interval
tree notifier. It doesn't seem that this is going to be needed since we
aren't actually doing anything with current->mm. The interval tree
notifier stuff still has a FIXME noted from a previous commit that will be
addressed in a follow on patch.
Cc: <stable@vger.kernel.org>
Fixes: e0cf75deab81 ("IB/hfi1: Fix mm_struct use after free")
Fixes: 3faa3d9a308e ("IB/hfi1: Make use of mm consistent")
Link: https://lore.kernel.org/r/20201125210112.104301.51331.stgit@awfm-01.aw.intel.com
Suggested-by: Jann Horn <jannh@google.com>
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There are reports wrt lockdep splat in nftables, e.g.:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 31416 at net/netfilter/nf_tables_api.c:622
lockdep_nfnl_nft_mutex_not_held+0x28/0x38 [nf_tables]
...
These are caused by an earlier, unrelated bug such as a n ABBA deadlock
in a different subsystem.
In such an event, lockdep is disabled and lockdep_is_held returns true
unconditionally. This then causes the WARN() in nf_tables.
Make the WARN conditional on lockdep still active to avoid this.
Fixes: f102d66b335a417 ("netfilter: nf_tables: use dedicated mutex to guard transactions")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/linux-kselftest/CA+G9fYvFUpODs+NkSYcnwKnXm62tmP=ksLeBPmB+KFrB2rvCtQ@mail.gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
syzbot found that we are not validating user input properly
before copying 16 bytes [1].
Using NLA_BINARY in ipaddr_policy[] for IPv6 address is not correct,
since it ensures at most 16 bytes were provided.
We should instead make sure user provided exactly 16 bytes.
In old kernels (before v4.20), fix would be to remove the NLA_BINARY,
since NLA_POLICY_EXACT_LEN() was not yet available.
[1]
BUG: KMSAN: uninit-value in hash_ip6_add+0x1cba/0x3a50 net/netfilter/ipset/ip_set_hash_gen.h:892
CPU: 1 PID: 11611 Comm: syz-executor.0 Not tainted 5.10.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x21c/0x280 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x5f/0xa0 mm/kmsan/kmsan_instr.c:197
hash_ip6_add+0x1cba/0x3a50 net/netfilter/ipset/ip_set_hash_gen.h:892
hash_ip6_uadt+0x976/0xbd0 net/netfilter/ipset/ip_set_hash_ip.c:267
call_ad+0x329/0xd00 net/netfilter/ipset/ip_set_core.c:1720
ip_set_ad+0x111f/0x1440 net/netfilter/ipset/ip_set_core.c:1808
ip_set_uadd+0xf6/0x110 net/netfilter/ipset/ip_set_core.c:1833
nfnetlink_rcv_msg+0xc7d/0xdf0 net/netfilter/nfnetlink.c:252
netlink_rcv_skb+0x70a/0x820 net/netlink/af_netlink.c:2494
nfnetlink_rcv+0x4f0/0x4380 net/netfilter/nfnetlink.c:600
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x11da/0x14b0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x173c/0x1840 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
____sys_sendmsg+0xc7a/0x1240 net/socket.c:2353
___sys_sendmsg net/socket.c:2407 [inline]
__sys_sendmsg+0x6d5/0x830 net/socket.c:2440
__do_sys_sendmsg net/socket.c:2449 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2447
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447
do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45deb9
Code: 0d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fe2e503fc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000029ec0 RCX: 000000000045deb9
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000003
RBP: 000000000118bf60 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118bf2c
R13: 000000000169fb7f R14: 00007fe2e50409c0 R15: 000000000118bf2c
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:121 [inline]
kmsan_internal_chain_origin+0xad/0x130 mm/kmsan/kmsan.c:289
__msan_chain_origin+0x57/0xa0 mm/kmsan/kmsan_instr.c:147
ip6_netmask include/linux/netfilter/ipset/pfxlen.h:49 [inline]
hash_ip6_netmask net/netfilter/ipset/ip_set_hash_ip.c:185 [inline]
hash_ip6_uadt+0xb1c/0xbd0 net/netfilter/ipset/ip_set_hash_ip.c:263
call_ad+0x329/0xd00 net/netfilter/ipset/ip_set_core.c:1720
ip_set_ad+0x111f/0x1440 net/netfilter/ipset/ip_set_core.c:1808
ip_set_uadd+0xf6/0x110 net/netfilter/ipset/ip_set_core.c:1833
nfnetlink_rcv_msg+0xc7d/0xdf0 net/netfilter/nfnetlink.c:252
netlink_rcv_skb+0x70a/0x820 net/netlink/af_netlink.c:2494
nfnetlink_rcv+0x4f0/0x4380 net/netfilter/nfnetlink.c:600
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x11da/0x14b0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x173c/0x1840 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
____sys_sendmsg+0xc7a/0x1240 net/socket.c:2353
___sys_sendmsg net/socket.c:2407 [inline]
__sys_sendmsg+0x6d5/0x830 net/socket.c:2440
__do_sys_sendmsg net/socket.c:2449 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2447
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447
do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:121 [inline]
kmsan_internal_chain_origin+0xad/0x130 mm/kmsan/kmsan.c:289
kmsan_memcpy_memmove_metadata+0x25e/0x2d0 mm/kmsan/kmsan.c:226
kmsan_memcpy_metadata+0xb/0x10 mm/kmsan/kmsan.c:246
__msan_memcpy+0x46/0x60 mm/kmsan/kmsan_instr.c:110
ip_set_get_ipaddr6+0x2cb/0x370 net/netfilter/ipset/ip_set_core.c:310
hash_ip6_uadt+0x439/0xbd0 net/netfilter/ipset/ip_set_hash_ip.c:255
call_ad+0x329/0xd00 net/netfilter/ipset/ip_set_core.c:1720
ip_set_ad+0x111f/0x1440 net/netfilter/ipset/ip_set_core.c:1808
ip_set_uadd+0xf6/0x110 net/netfilter/ipset/ip_set_core.c:1833
nfnetlink_rcv_msg+0xc7d/0xdf0 net/netfilter/nfnetlink.c:252
netlink_rcv_skb+0x70a/0x820 net/netlink/af_netlink.c:2494
nfnetlink_rcv+0x4f0/0x4380 net/netfilter/nfnetlink.c:600
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x11da/0x14b0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x173c/0x1840 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
____sys_sendmsg+0xc7a/0x1240 net/socket.c:2353
___sys_sendmsg net/socket.c:2407 [inline]
__sys_sendmsg+0x6d5/0x830 net/socket.c:2440
__do_sys_sendmsg net/socket.c:2449 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2447
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447
do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:121 [inline]
kmsan_internal_poison_shadow+0x5c/0xf0 mm/kmsan/kmsan.c:104
kmsan_slab_alloc+0x8d/0xe0 mm/kmsan/kmsan_hooks.c:76
slab_alloc_node mm/slub.c:2906 [inline]
__kmalloc_node_track_caller+0xc61/0x15f0 mm/slub.c:4512
__kmalloc_reserve net/core/skbuff.c:142 [inline]
__alloc_skb+0x309/0xae0 net/core/skbuff.c:210
alloc_skb include/linux/skbuff.h:1094 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1176 [inline]
netlink_sendmsg+0xdb8/0x1840 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg net/socket.c:671 [inline]
____sys_sendmsg+0xc7a/0x1240 net/socket.c:2353
___sys_sendmsg net/socket.c:2407 [inline]
__sys_sendmsg+0x6d5/0x830 net/socket.c:2440
__do_sys_sendmsg net/socket.c:2449 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2447
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447
do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: a7b4f989a629 ("netfilter: ipset: IP set core support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Similar to XDP and some JITs, also add Brendan and Florent who have been
reviewing all my patches internally as reviewers. The patches are expected
as usual to go via the BPF tree(s) / list / merge workflows.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201125202404.1419509-1-kpsingh@chromium.org
|
|
The tc-taprio base time indicates the beginning of the tc-taprio
schedule, which is cyclic by definition (where the length of the cycle
in nanoseconds is called the cycle time). The base time is a 64-bit PTP
time in the TAI domain.
Logically, the base-time should be a future time. But that imposes some
restrictions to user space, which has to retrieve the current PTP time
from the NIC first, then calculate a base time that will still be larger
than the base time by the time the kernel driver programs this value
into the hardware. Actually ensuring that the programmed base time is in
the future is still a problem even if the kernel alone deals with this.
Luckily, the enetc hardware already advances a base-time that is in the
past into a congruent time in the immediate future, according to the
same formula that can be found in the software implementation of taprio
(in taprio_get_start_time):
/* Schedule the start time for the beginning of the next
* cycle.
*/
n = div64_s64(ktime_sub_ns(now, base), cycle);
*start = ktime_add_ns(base, (n + 1) * cycle);
There's only one problem: the driver doesn't let the hardware do that.
It interferes with the base-time passed from user space, by special-casing
the situation when the base-time is zero, and replaces that with the
current PTP time. This changes the intended effective base-time of the
schedule, which will in the end have a different phase offset than if
the base-time of 0.000000000 was to be advanced by an integer multiple
of the cycle-time.
Fixes: 34c6adf1977b ("enetc: Configure the Time-Aware Scheduler via tc-taprio offload")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20201124220259.3027991-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After cited commit, gro_cells_destroy() became damn slow
on hosts with a lot of cores.
This is because we have one additional synchronize_net() per cpu as
stated in the changelog.
gro_cells_init() is setting NAPI_STATE_NO_BUSY_POLL, and this was enough
to not have one synchronize_net() call per netif_napi_del()
We can factorize all the synchronize_net() to a single one,
right before freeing per-cpu memory.
Fixes: 5198d545dba8 ("net: remove napi_hash_del() from driver-facing API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201124203822.1360107-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 757926247836 ("net: stmmac: add flexible PPS to dwmac
4.10a") was intended to modify the struct dwmac410_ops, but it got
somehow badly merged and modified the struct dwmac4_ops.
Revert the modification in struct dwmac4_ops and re-apply it
properly in struct dwmac410_ops.
Fixes: 757926247836 ("net: stmmac: add flexible PPS to dwmac 4.10a")
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20201124223729.886992-1-antonio.borneo@st.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kmemleak report a memory leak as follows:
unreferenced object 0xffff8880059c6a00 (size 64):
comm "ip", pid 23696, jiffies 4296590183 (age 1755.384s)
hex dump (first 32 bytes):
20 01 00 10 00 00 00 00 00 00 00 00 00 00 00 00 ...............
1c 00 00 00 00 00 00 00 00 00 00 00 07 00 00 00 ................
backtrace:
[<00000000aa4e7a87>] ip6addrlbl_add+0x90/0xbb0
[<0000000070b8d7f1>] ip6addrlbl_net_init+0x109/0x170
[<000000006a9ca9d4>] ops_init+0xa8/0x3c0
[<000000002da57bf2>] setup_net+0x2de/0x7e0
[<000000004e52d573>] copy_net_ns+0x27d/0x530
[<00000000b07ae2b4>] create_new_namespaces+0x382/0xa30
[<000000003b76d36f>] unshare_nsproxy_namespaces+0xa1/0x1d0
[<0000000030653721>] ksys_unshare+0x3a4/0x780
[<0000000007e82e40>] __x64_sys_unshare+0x2d/0x40
[<0000000031a10c08>] do_syscall_64+0x33/0x40
[<0000000099df30e7>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
We should free all rules when we catch an error in ip6addrlbl_net_init().
otherwise a memory leak will occur.
Fixes: 2a8cc6c89039 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20201124071728.8385-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When spectre_v2_user={seccomp,prctl},ibpb is specified on the command
line, IBPB is force-enabled and STIPB is conditionally-enabled (or not
available).
However, since
21998a351512 ("x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS.")
the spectre_v2_user_ibpb variable is set to SPECTRE_V2_USER_{PRCTL,SECCOMP}
instead of SPECTRE_V2_USER_STRICT, which is the actual behaviour.
Because the issuing of IBPB relies on the switch_mm_*_ibpb static
branches, the mitigations behave as expected.
Since
1978b3a53a74 ("x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP")
this discrepency caused the misreporting of IB speculation via prctl().
On CPUs with STIBP always-on and spectre_v2_user=seccomp,ibpb,
prctl(PR_GET_SPECULATION_CTRL) would return PR_SPEC_PRCTL |
PR_SPEC_ENABLE instead of PR_SPEC_DISABLE since both IBPB and STIPB are
always on. It also allowed prctl(PR_SET_SPECULATION_CTRL) to set the IB
speculation mode, even though the flag is ignored.
Similarly, for CPUs without SMT, prctl(PR_GET_SPECULATION_CTRL) should
also return PR_SPEC_DISABLE since IBPB is always on and STIBP is not
available.
[ bp: Massage commit message. ]
Fixes: 21998a351512 ("x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS.")
Fixes: 1978b3a53a74 ("x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP")
Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201110123349.1.Id0cbf996d2151f4c143c90f9028651a5b49a5908@changeid
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- a rand Kconfig fixup for mtk-vcodec
- a fix at h264 handling at cedrus codec driver
- some warning fixes when config PM is not enabled at marvell-ccic
- two fixes at venus codec driver: one related to codec profile and the
other one related to a bad error path which causes an OOPS on module
re-bind
* tag 'media/v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: venus: pm_helpers: Fix kernel module reload
media: venus: venc: Fix setting of profile and level
media: cedrus: h264: Fix check for presence of scaling matrix
media: media/platform/marvell-ccic: fix warnings when CONFIG_PM is not enabled
media: mtk-vcodec: fix build breakage when one of VPU or SCP is enabled
media: mtk-vcodec: move firmware implementations into their own files
|
|
riscv's <vdso/processor.h> uses barrier() so it should include
<asm/barrier.h>
Fixes this build error:
CC [M] drivers/net/ethernet/emulex/benet/be_main.o
In file included from ./include/vdso/processor.h:10,
from ./arch/riscv/include/asm/processor.h:11,
from ./include/linux/prefetch.h:15,
from drivers/net/ethernet/emulex/benet/be_main.c:14:
./arch/riscv/include/asm/vdso/processor.h: In function 'cpu_relax':
./arch/riscv/include/asm/vdso/processor.h:14:2: error: implicit declaration of function 'barrier' [-Werror=implicit-function-declaration]
14 | barrier();
This happens with a total of 5 networking drivers -- they all use
<linux/prefetch.h>.
rv64 allmodconfig now builds cleanly after this patch.
Fixes fallout from:
815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive")
Fixes: ad5d1122b82f ("riscv: use vDSO common flow to reduce the latency of the time-related functions")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The jump_label_init() should be called from setup_arch() very
early for proper functioning of jump label support.
Fixes: ebc00dde8a97 ("riscv: Add jump-label implementation")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Commit a96843372331 ("kbuild: explicitly specify the build id style")
explicitly set the build ID style to SHA1. Commit c2c81bb2f691 ("RISC-V:
Fix the VDSO symbol generaton for binutils-2.35+") undid this change,
likely unintentionally.
Restore it so that the build ID style stays consistent across the tree
regardless of linker.
Fixes: c2c81bb2f691 ("RISC-V: Fix the VDSO symbol generaton for binutils-2.35+")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Bill Wendling <morbo@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
GFS2's freeze/thaw mechanism uses a special freeze glock to control its
operation. It does this with a sync glock operation (glops.c) called
freeze_go_sync. When the freeze glock is demoted (glock's do_xmote) the
glops function causes the file system to be frozen. This is intended. However,
GFS2's mount and unmount processes also hold the freeze glock to prevent other
processes, perhaps on different cluster nodes, from mounting the frozen file
system in read-write mode.
Before this patch, there was no check in freeze_go_sync for whether a freeze
in intended or whether the glock demote was caused by a normal unmount.
So it was trying to freeze the file system it's trying to unmount, which
ends up in a deadlock.
This patch adds an additional check to freeze_go_sync so that demotes of the
freeze glock are ignored if they come from the unmount process.
Fixes: 20b329129009 ("gfs2: Fix regression in freeze_go_sync")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
If gfs2 tries to mount a (corrupt) file system that has no resource
groups it still tries to set preferences on the first one, which causes
a kernel null pointer dereference. This patch adds a check to function
gfs2_ri_update so this condition is detected and reported back as an
error.
Reported-by: syzbot+e3f23ce40269a4c9053a@syzkaller.appspotmail.com
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
CONFIG_EFI_EARLYCON defaults to yes, and thus is enabled on systems that
do not support EFI, or do not have EFI support enabled, but do satisfy
the symbol's other dependencies.
While drivers/firmware/efi/ won't be entered during the build phase if
CONFIG_EFI=n, and drivers/firmware/efi/earlycon.c itself thus won't be
built, enabling EFI_EARLYCON does force-enable CONFIG_FONT_SUPPORT and
CONFIG_ARCH_USE_MEMREMAP_PROT, and CONFIG_FONT_8x16, which is
undesirable.
Fix this by making CONFIG_EFI_EARLYCON depend on CONFIG_EFI.
This reduces kernel size on headless systems by more than 4 KiB.
Fixes: 69c1f396f25b805a ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20201124191646.3559757-1-geert@linux-m68k.org
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The memory leak addressed by commit fe5186cf12e3 is a false positive:
all allocations are recorded in a linked list, and freed when the
filesystem is unmounted. This leads to double frees, and as reported
by David, leads to crashes if SLUB is configured to self destruct when
double frees occur.
So drop the redundant kfree() again, and instead, mark the offending
pointer variable so the allocation is ignored by kmemleak.
Cc: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Fixes: fe5186cf12e3 ("efivarfs: fix memory leak in efivarfs_create()")
Reported-by: David Laight <David.Laight@aculab.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Efivars allows for overriding of SSDT tables, however starting with
commit
bf67fad19e493b ("efi: Use more granular check for availability for variable services")
this use case is broken. When loading SSDT generic ops should be set
first, however mentioned commit reversed order of operations. Fix this
by restoring original order of operations.
Fixes: bf67fad19e493b ("efi: Use more granular check for availability for variable services")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20201123172817.124146-1-amadeuszx.slawinski@linux.intel.com
Tested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
i40iw_mmap manipulates the vma->vm_pgoff to differentiate a push page mmap
vs a doorbell mmap, and uses it to compute the pfn in remap_pfn_range
without any validation. This is vulnerable to an mmap exploit as described
in: https://lore.kernel.org/r/20201119093523.7588-1-zhudi21@huawei.com
The push feature is disabled in the driver currently and therefore no push
mmaps are issued from user-space. The feature does not work as expected in
the x722 product.
Remove the push module parameter and all VMA attribute manipulations for
this feature in i40iw_mmap. Update i40iw_mmap to only allow DB user
mmapings at offset = 0. Check vm_pgoff for zero and if the mmaps are bound
to a single page.
Cc: <stable@kernel.org>
Fixes: d37498417947 ("i40iw: add files for iwarp interface")
Link: https://lore.kernel.org/r/20201125005616.1800-2-shiraz.saleem@intel.com
Reported-by: Di Zhu <zhudi21@huawei.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When the device-tree board file was added for the Tegra234 VDK simulator
it incorrectly used the names 'cbb' and 'sdhci' instead of 'bus' and
'mmc', respectively. The names 'bus' and 'mmc' are required by the
device-tree json-schema validation tools. Therefore, fix this by
renaming these nodes accordingly.
Fixes: 639448912ba1 ("arm64: tegra: Initial Tegra234 VDK support")
Reported-by: Ashish Singhal <ashishsingha@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The AON HSP node's "reg" property size 0xa0000 will overlap with other
resources. This patch fixes that wrong value with correct size 0x90000.
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Fixes: a38570c22e9d ("arm64: tegra: Add nodes for TCU on Tegra194")
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
USB host mode is broken on the OTG port of Jetson TX1 platform because
the USB_VBUS_EN0 regulator (regulator@11) is being overwritten by the
vdd-cam-1v2 regulator. This commit rearranges USB_VBUS_EN0 to be
regulator@14.
Fixes: 257c8047be44 ("arm64: tegra: jetson-tx1: Add camera supplies")
Cc: stable@vger.kernel.org
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Jetson Xavier NX board routes UARTA to the 40-pin header and UARTC
to a 12-pin debug header. The UARTs can be used by either the Tegra
Combined UART (TCU) driver or the Tegra 8250 driver. By default, the
TCU will use UARTC on Jetson Xavier NX. Currently, device-tree for
Xavier NX enables the TCU and the Tegra 8250 node for UARTC. Fix this
by disabling the Tegra 8250 node for UARTC and enabling the Tegra 8250
node for UARTA.
Fixes: 3f9efbbe57bc ("arm64: tegra: Add support for Jetson Xavier NX")
Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Commit ff4c371d2bc0 ("arm64: defconfig: Build ADMA and ACONNECT driver")
enable the Tegra ADMA and ACONNECT drivers and this is causing resume
from system suspend to fail on Jetson TX2. Resume is failing because the
ACONNECT driver is being resumed before the BPMP driver, and the ACONNECT
driver is attempting to power on a power-domain that is provided by the
BPMP. While a proper fix for the resume sequencing problem is identified,
disable the ACONNECT for Jetson TX2 temporarily to avoid breaking system
suspend.
Please note that ACONNECT driver is used by the Audio Processing Engine
(APE) on Tegra, but because there is no mainline support for APE on
Jetson TX2 currently, disabling the ACONNECT does not disable any useful
feature at the moment.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
When SPI DW memory ops support was introduced, there was a check for
excluding controllers which supplied their own CS function. Even so,
the mem_ops pointer is *always* presented to the SPI core.
This causes the SPI core sanity check in spi_controller_check_ops() to
refuse registration, since a mem_ops pointer is being supplied without
an exec_op member function.
The end result is failure of the SPI DW driver on sparx5 and similar
platforms.
The fix in the core SPI DW driver is to avoid presenting the mem_ops
pointer if the exec_op function is not set.
Fixes: 6423207e57ea (spi: dw: Add memory operations support)
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20201120213414.339701-1-lars.povlsen@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix to return a negative error code from the error handling case
instead of 0 in function wm_adsp_load(), as done elsewhere in this
function.
Fixes: 170b1e123f38 ("ASoC: wm_adsp: Add support for new Halo core DSPs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Acked-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201123133839.4073787-1-luomeng12@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit 327d5b2fee91c ("iommu/vt-d: Allow 32bit devices to uses DMA
domain"), swiotlb could also be used for direct memory access if IOMMU
is enabled but a device is configured to pass through the DMA translation.
Keep swiotlb when IOMMU is forced on, otherwise, some devices won't work
if "iommu=pt" kernel parameter is used.
Fixes: 327d5b2fee91 ("iommu/vt-d: Allow 32bit devices to uses DMA domain")
Reported-and-tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201125014124.4070776-1-baolu.lu@linux.intel.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210237
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The bdi_dev_name() returns a char [64], and
the __entry->name is a char [32].
It maybe dangerous to TP_printk("%s", __entry->name)
after the strncpy().
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201124165205.GA23937@rlk
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Only in smp systems the cache policy is setup as write alloc, in
single cpu systems the cache policy is set as writeback and it is
normal memory, so, it should pass the is_normal_memory check in the
share memory registration.
Add the right condition to make it work in no smp systems.
Fixes: cdbcf83d29c1 ("tee: optee: check type of registered shared memory")
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Pinned pages are not properly accounted particularly when
mapping error occurs on IOTLB update. Clean up dangling
pinned pages for the error path.
The memory usage for bookkeeping pinned pages is reverted
to what it was before: only one single free page is needed.
This helps reduce the host memory demand for VM with a large
amount of memory, or in the situation where host is running
short of free memory.
Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Link: https://lore.kernel.org/r/1604618793-4681-1-git-send-email-si-wei.liu@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
vringh_iov_push_*() functions don't have 'dst' parameter, but have
the 'src' parameter.
Replace 'dst' description with 'src' description.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201116161653.102904-1-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vhost scsi owns the scsi se_cmd but lio frees the se_cmd->se_tmr
before calling release_cmd, so while with normal cmd completion we
can access the se_cmd from the vhost work, we can't do the same with
se_cmd->se_tmr. This has us copy the tmf response in
vhost_scsi_queue_tm_rsp to our internal vhost-scsi tmf struct for
when it gets sent to the guest from our worker thread.
Fixes: efd838fec17b ("vhost scsi: Add support for LUN resets.")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/1605887459-3864-1-git-send-email-michael.christie@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The gamma LUT has to be reloaded after changing the primary plane's
color format. This used to be done implicitly by the CRTC atomic_enable()
helper after updating the primary plane. With the recent reordering of
the steps, the primary plane's setup was moved last and invalidated
the gamma LUT. Fix this by setting the LUT from within atomic_flush().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 2f0ddd89fe32 ("drm/ast: Enable CRTC before planes")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200922144655.23624-1-tzimmermann@suse.de
(cherry-picked from 8e3784dfef8a03143b13e7e4011f276a954f1bc6)
|
|
Size is page count here.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1372
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d836917da7e5ca9b33ef4d499972f1feeb519e00)
[airlied: from drm-next]
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Make an explicit suggestion how to post user space side of kernel
patches to avoid reposts when patchwork groups the wrong patches.
v2: mention the cases unlike iproute2 explicitly
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
