summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-04netlink: set bad attribute also on maxtype checkMichal Kubecek
The check that attribute type is within 0...maxtype range in __nla_validate_parse() sets only error message but not bad_attr in extack. Set also bad_attr to tell userspace which attribute failed validation. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04genetlink: do not validate dump requests if there is no policyMichal Kubecek
Unlike do requests, dump genetlink requests now perform strict validation by default even if the genetlink family does not set policy and maxtype because it does validation and parsing on its own (e.g. because it wants to allow different message format for different commands). While the null policy will be ignored, maxtype (which would be zero) is still checked so that any attribute will fail validation. The solution is to only call __nla_validate() from genl_family_rcv_msg() if family->maxtype is set. Fixes: ef6243acb478 ("genetlink: optionally validate strictly/dumps") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04Merge branch 'mlxsw-Firmware-version-update'David S. Miller
Ido Schimmel says: ==================== mlxsw: Firmware version update This patchset updates mlxsw to use a new firmware version and adds support for split into two ports on Spectrum-2 based systems. Patch #1 updates the firmware version to 13.2000.1122 Patch #2 queries new resources from the firmware. Patch #3 makes use of these resources in order to support split into two ports on Spectrum-2 based systems. The need for these resources is explained by Shalom: When splitting a port, different local ports need to be mapped on different systems. For example: SN3700 (local_ports_in_2x=2): * Without split: front panel 1 --> local port 1 front panel 2 --> local port 5 * Split to 2: front panel 1s0 --> local port 1 front panel 1s1 --> local port 3 front panel 2 --> local port 5 SN3800 (local_ports_in_2x=1): * Without split: front panel 1 --> local port 1 front panel 2 --> local port 3 * Split to 2: front panel 1s0 --> local port 1 front panel 1s1 --> local port 2 front panel 2 --> local port 3 The local_ports_in_{1x, 2x} resources provide the offsets from the base local ports according to which the new local ports can be calculated. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04mlxsw: spectrum: split base on local_ports_in_{1x, 2x} resourcesShalom Toledo
When splitting a port, different local ports need to be mapped on different systems. For example: SN3700 (local_ports_in_2x=2): * Without split: front panel 1 --> local port 1 front panel 2 --> local port 5 * Split to 2: front panel 1s0 --> local port 1 front panel 1s1 --> local port 3 front panel 2 --> local port 5 SN3800 (local_ports_in_2x=1): * Without split: front panel 1 --> local port 1 front panel 2 --> local port 3 * Split to 2: front panel 1s0 --> local port 1 front panel 1s1 --> local port 2 front panel 2 --> local port 3 The local_ports_in_{1x, 2x} resources provide the offsets from the base local ports according to which the new local ports can be calculated. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04mlxsw: resources: Add local_ports_in_{1x, 2x}Shalom Toledo
Since the number of local ports in 4x changed between SPC and SPC-2, firmware expose new resources that the driver can query. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04mlxsw: Bump firmware version to 13.2000.1122Ido Schimmel
The new version supports two features that are required by upcoming changes in the driver: * Querying of new resources allowing port split into two ports on Spectrum-2 systems * Querying of number of gearboxes on supported systems such as SN3800 Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04tipc: fix missing Name entries due to half-failoverTuong Lien
TIPC link can temporarily fall into "half-establish" that only one of the link endpoints is ESTABLISHED and starts to send traffic, PROTOCOL messages, whereas the other link endpoint is not up (e.g. immediately when the endpoint receives ACTIVATE_MSG, the network interface goes down...). This is a normal situation and will be settled because the link endpoint will be eventually brought down after the link tolerance time. However, the situation will become worse when the second link is established before the first link endpoint goes down, For example: 1. Both links <1A-2A>, <1B-2B> down 2. Link endpoint 2A up, but 1A still down (e.g. due to network disturbance, wrong session, etc.) 3. Link <1B-2B> up 4. Link endpoint 2A down (e.g. due to link tolerance timeout) 5. Node B starts failover onto link <1B-2B> ==> Node A does never start link failover. When the "half-failover" situation happens, two consequences have been observed: a) Peer link/node gets stuck in FAILINGOVER state; b) Traffic or user messages that peer node is trying to failover onto the second link can be partially or completely dropped by this node. The consequence a) was actually solved by commit c140eb166d68 ("tipc: fix failover problem"), but that commit didn't cover the b). It's due to the fact that the tunnel link endpoint has never been prepared for a failover, so the 'l->drop_point' (and the other data...) is not set correctly. When a TUNNEL_MSG from peer node arrives on the link, depending on the inner message's seqno and the current 'l->drop_point' value, the message can be dropped (- treated as a duplicate message) or processed. At this early stage, the traffic messages from peer are likely to be NAME_DISTRIBUTORs, this means some name table entries will be missed on the node forever! The commit resolves the issue by starting the FAILOVER process on this node as well. Another benefit from this solution is that we ensure the link will not be re-established until the failover ends. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04cls_matchall: avoid panic when receiving a packet before filter setMatteo Croce
When a matchall classifier is added, there is a small time interval in which tp->root is NULL. If we receive a packet in this small time slice a NULL pointer dereference will happen, leading to a kernel panic: # tc qdisc replace dev eth0 ingress # tc filter add dev eth0 parent ffff: matchall action gact drop Unable to handle kernel NULL pointer dereference at virtual address 0000000000000034 Mem abort info: ESR = 0x96000005 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000005 CM = 0, WnR = 0 user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000a623d530 [0000000000000034] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000005 [#1] SMP Modules linked in: cls_matchall sch_ingress nls_iso8859_1 nls_cp437 vfat fat m25p80 spi_nor mtd xhci_plat_hcd xhci_hcd phy_generic sfp mdio_i2c usbcore i2c_mv64xxx marvell10g mvpp2 usb_common spi_orion mvmdio i2c_core sbsa_gwdt phylink ip_tables x_tables autofs4 Process ksoftirqd/0 (pid: 9, stack limit = 0x0000000009de7d62) CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 5.1.0-rc6 #21 Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT) pstate: 40000005 (nZcv daif -PAN -UAO) pc : mall_classify+0x28/0x78 [cls_matchall] lr : tcf_classify+0x78/0x138 sp : ffffff80109db9d0 x29: ffffff80109db9d0 x28: ffffffc426058800 x27: 0000000000000000 x26: ffffffc425b0dd00 x25: 0000000020000000 x24: 0000000000000000 x23: ffffff80109dbac0 x22: 0000000000000001 x21: ffffffc428ab5100 x20: ffffffc425b0dd00 x19: ffffff80109dbac0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: ffffffbf108ad288 x12: dead000000000200 x11: 00000000f0000000 x10: 0000000000000001 x9 : ffffffbf1089a220 x8 : 0000000000000001 x7 : ffffffbebffaa950 x6 : 0000000000000000 x5 : 000000442d6ba000 x4 : 0000000000000000 x3 : ffffff8008735ad8 x2 : ffffff80109dbac0 x1 : ffffffc425b0dd00 x0 : ffffff8010592078 Call trace: mall_classify+0x28/0x78 [cls_matchall] tcf_classify+0x78/0x138 __netif_receive_skb_core+0x29c/0xa20 __netif_receive_skb_one_core+0x34/0x60 __netif_receive_skb+0x28/0x78 netif_receive_skb_internal+0x2c/0xc0 napi_gro_receive+0x1a0/0x1d8 mvpp2_poll+0x928/0xb18 [mvpp2] net_rx_action+0x108/0x378 __do_softirq+0x128/0x320 run_ksoftirqd+0x44/0x60 smpboot_thread_fn+0x168/0x1b0 kthread+0x12c/0x130 ret_from_fork+0x10/0x1c Code: aa0203f3 aa1e03e0 d503201f f9400684 (b9403480) ---[ end trace fc71e2ef7b8ab5a5 ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x002,00002000 Memory Limit: none Rebooting in 1 seconds.. Fix this by adding a NULL check in mall_classify(). Fixes: ed76f5edccc9 ("net: sched: protect filter_chain list with filter_chain_lock mutex") Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: phy: improve resuming from hibernationHeiner Kallweit
I got an interesting report [0] that after resuming from hibernation the link has 100Mbps instead of 1Gbps. Reason is that another OS has been used whilst Linux was hibernated. And this OS speeds down the link due to WoL. Therefore, when resuming, we shouldn't expect that what the PHY advertises is what it did when hibernating. Easiest way to do this is removing state PHY_RESUMING. Instead always go via PHY_UP that configures PHY advertisement. [0] https://bugzilla.kernel.org/show_bug.cgi?id=202851 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: phy: improve pause handlingHeiner Kallweit
When probing the phy device we set sym and asym pause in the "supported" bitmap (unless the PHY tells us otherwise). However we don't know yet whether the MAC supports pause. Simply copying phy->supported to phy->advertising will trigger advertising pause, and that's not what we want. Therefore add phy_advertise_supported() that copies all modes but doesn't touch the pause bits. In phy_support_(a)sym_pause we shouldn't set any bits in the supported bitmap because we may set a bit the PHY intentionally disabled. Effective pause support should be the AND-combined PHY and MAC pause capabilities. If the MAC supports everything, then it's only relevant what the PHY supports. If MAC supports sym pause only, then we have to clear the asym bit in phydev->supported. Copy the pause flags only and don't touch the modes, because a driver may have intentionally removed a mode from phydev->advertising. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: sched: cls_u32: use struct_size() helperGustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, replace code of the following form: sizeof(*s) + s->nkeys*sizeof(struct tc_u32_key) with: struct_size(s, keys, s->nkeys) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: add a generic tracepoint for TX queue timeoutCong Wang
Although devlink health report does a nice job on reporting TX timeout and other NIC errors, unfortunately it requires drivers to support it but currently only mlx5 has implemented it. Before other drivers could catch up, it is useful to have a generic tracepoint to monitor this kind of TX timeout. We have been suffering TX timeout with different drivers, we plan to start to monitor it with rasdaemon which just needs a new tracepoint. Sample output: ksoftirqd/1-16 [001] ..s2 144.043173: net_dev_xmit_timeout: dev=ens3 driver=e1000 queue=0 Cc: Eran Ben Elisha <eranbe@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04neighbor: Call __ipv4_neigh_lookup_noref in neigh_xmitDavid Ahern
Commit cd9ff4de0107 changed the key for IFF_POINTOPOINT devices to INADDR_ANY but neigh_xmit which is used for MPLS encapsulations was not updated to use the altered key. The result is that every packet Tx does a lookup on the gateway address which does not find an entry, a new one is created only to find the existing one in the table right before the insert since arp_constructor was updated to reset the primary key. This is seen in the allocs and destroys counters: ip -s -4 ntable show | head -10 | grep alloc which increase for each packet showing the unnecessary overhread. Fix by having neigh_xmit use __ipv4_neigh_lookup_noref for NEIGH_ARP_TABLE. Fixes: cd9ff4de0107 ("ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY") Reported-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04neighbor: Reset gc_entries counter if new entry is released before insertDavid Ahern
Ian and Alan both reported seeing overflows after upgrades to 5.x kernels: neighbour: arp_cache: neighbor table overflow! Alan's mpls script helped get to the bottom of this bug. When a new entry is created the gc_entries counter is bumped in neigh_alloc to check if a new one is allowed to be created. ___neigh_create then searches for an existing entry before inserting the just allocated one. If an entry already exists, the new one is dropped in favor of the existing one. In this case the cleanup path needs to drop the gc_entries counter. There is no memory leak, only a counter leak. Fixes: 58956317c8d ("neighbor: Improve garbage collection") Reported-by: Ian Kumlien <ian.kumlien@gmail.com> Reported-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04Merge tag 'mlx5-updates-2019-04-30' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2019-04-30 mlx5 misc updates: 1) Bodong Wang and Parav Pandit (6): - Remove unused mlx5_query_nic_vport_vlans - vport macros refactoring - Fix vport access in E-Switch - Use atomic rep state to serialize state change 2) Eli Britstein (2): - prio tag mode support, added ACLs and replace TC vlan pop with vlan 0 rewrite when prio tag mode is enabled. 3) Erez Alfasi (2): - ethtool: Add SFF-8436 and SFF-8636 max EEPROM length definitions - mlx5e: ethtool, Add support for EEPROM high pages query 4) Masahiro Yamada (1): - remove meaningless CFLAGS_tracepoint.o 5) Maxim Mikityanskiy (1): - Put the common XDP code into a function 6) Tariq Toukan (2): - Turn on HW tunnel offload in all TIRs 7) Vlad Buslov (1): - Return error when trying to insert existing flower filter ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-05-02 This series contains updates to the ice driver only. Anirudh introduces the framework to store queue specific information in the VSI queue contexts. This will allow future changes to update the structure to hold queue specific information. Akeem adds additional check so that if there is no queue to disable when attempting to disable a queue, return a configuration error without acquiring the lock. Fixed an issue with non-trusted VFs being able to add more than the permitted number of VLANs. Bruce removes unreachable code and updated the function to return void since it would never return anything but success. Brett provides most of the changes in the series, starting with reducing the scope of the error variable used and improved the debug message if we fail to configure the receive queue. Updates the driver to use a macro instead of using the same 'for' loop throughout the driver which helps with readability. Fixed an issue where users were led to believe they could set rx-usecs-high value, yet the changes to this value would not stick because it was not yet implemented to allow changes to this value, so implement the missing code to change the value. Found we had unnecessary wait when disabling queues, so remove it. I,proved a wasteful addition operation in our hot path by adding a member to the ice_q_vector structure and the necessary changes to use the member which stores the calculated vector hardware index. Refactored the link event flow to make it cleaner and more clear. Maciej updates the array index when stopping transmit rings, so that process every ring the VSI, not just the rings in a given transmit class. Paul adds support for setting 52 byte RSS hash keys. Md Fahad cleaned up a runtime change to the PFINT_OICR_ENA register, since the interrupt handlers will handle resetting the bit, if necessary. Tony adds a missing PHY type, which was causing warning message about an unrecognized PHY. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04Merge branch 'ena-fixes'David S. Miller
Sameeh Jubran says: ==================== Bug fixes for ENA Ethernet driver Sameeh Jubran (8): net: ena: fix swapped parameters when calling ena_com_indirect_table_fill_entry net: ena: fix: set freed objects to NULL to avoid failing future allocations net: ena: fix: Free napi resources when ena_up() fails net: ena: fix incorrect test of supported hash function net: ena: fix return value of ena_com_config_llq_info() net: ena: improve latency by disabling adaptive interrupt moderation by default net: ena: fix ena_com_fill_hash_function() implementation net: ena: gcc 8: fix compilation warning ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: gcc 8: fix compilation warningSameeh Jubran
GCC 8 contains a number of new warnings as well as enhancements to existing checkers. The warning - Wstringop-truncation - warns for calls to bounded string manipulation functions such as strncat, strncpy, and stpncpy that may either truncate the copied string or leave the destination unchanged. In our case the destination string length (32 bytes) is much shorter than the source string (64 bytes) which causes this warning to show up. In general the destination has to be at least a byte larger than the length of the source string with strncpy for this warning not to showup. This can be easily fixed by using strlcpy instead which already does the truncation to the string. Documentation for this function can be found here: https://elixir.bootlin.com/linux/latest/source/lib/string.c#L141 Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix ena_com_fill_hash_function() implementationSameeh Jubran
ena_com_fill_hash_function() didn't configure the rss->hash_func. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: improve latency by disabling adaptive interrupt moderation by defaultSameeh Jubran
Adaptive interrupt moderation was erroneously enabled by default in the driver. In case the device supports adaptive interrupt moderation it will be automatically used, which may potentially increase latency. The adaptive moderation can be enabled from ethtool command in case the feature is supported by the device. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Guy Tzalik <gtzalik@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix return value of ena_com_config_llq_info()Sameeh Jubran
ena_com_config_llq_info() returns 0 even if ena_com_set_llq() fails. Return the failure code of ena_com_set_llq() in case it fails. fixes: 689b2bdaaa14 ("net: ena: add functions for handling Low Latency Queues in ena_com") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix incorrect test of supported hash functionSameeh Jubran
ena_com_set_hash_function() tests if a hash function is supported by the device before setting it. The test returns the opposite result than needed. Reverse the condition to return the correct value. Also use the BIT macro instead of inline shift. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix: Free napi resources when ena_up() failsSameeh Jubran
ena_up() calls ena_init_napi() but does not call ena_del_napi() in case of failure. This causes a segmentation fault upon rmmod when netif_napi_del() is called. Fix this bug by calling ena_del_napi() before returning error from ena_up(). Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix: set freed objects to NULL to avoid failing future allocationsSameeh Jubran
In some cases when a queue related allocation fails, successful past allocations are freed but the pointer that pointed to them is not set to NULL. This is a problem for 2 reasons: 1. This is generally a bad practice since this pointer might be accidentally accessed in the future. 2. Future allocations using the same pointer check if the pointer is NULL and fail if it is not. Fixed this by setting such pointers to NULL in the allocation of queue related objects. Also refactored the code of ena_setup_tx_resources() to goto-style error handling to avoid code duplication of resource freeing. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: ena: fix swapped parameters when calling ena_com_indirect_table_fill_entrySameeh Jubran
second parameter should be the index of the table rather than the value. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Saeed Bshara <saeedb@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04wimax/i2400m: use struct_size() helperGustavo A. R. Silva
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, replace code of the following form: sizeof(*tx_msg) + le16_to_cpu(tx_msg->num_pls) * sizeof(tx_msg->pld[0]); with: struct_size(tx_msg, pld, le16_to_cpu(tx_msg->num_pls)); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04Merge branch 'net-hns3-enhance-capabilities-for-fibre-port'David S. Miller
Jian Shen says: ==================== net: hns3: enhance capabilities for fibre port This patchset enhances more capabilities for fibre port, include multipe media type identification, autoneg, change port speed and FEC encoding. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: hns3: add support for FEC encoding controlJian Shen
This patch adds support for FEC encoding control, user can change FEC mode by command ethtool --set-fec, and get FEC mode by command ethtool --show-fec. The fec capability is changed follow the port speed. If autoneg on, the user configure fec mode will be overwritten by autoneg result. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: hns3: add autoneg and change speed support for fibre portJian Shen
Previously, our driver only supports phydev to autoneg or change port speed. This patch adds support for fibre port, driver gets media speed capability and autoneg capability from firmware. If the media supports multiple speeds, user can change port speed with command "ethtool -s <devname> speed xxxx autoneg off duplex full". If autoneg on, the user configuration may be overwritten by the autoneg result. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04net: hns3: add support for multiple media typeJian Shen
Previously, we can only identify copper and fiber type, the supported link modes of port information are always showing SR type. This patch adds support for multiple media types, include SR, LR CR, KR. Driver needs to query the media type from firmware periodicly, and updates the port information. The new port information looks like this: Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: 25000baseCR/Full 25000baseSR/Full 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full Supported pause frame use: Symmetric Supports auto-negotiation: No Supported FEC modes: None BaseR Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: internal Auto-negotiation: off Current message level: 0x00000036 (54) probe link ifdown ifup Link detected: yes In order to be compatible with old firmware which only support sfp speed, we remained using the same query command, and kept the former logic. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03usbnet: ipheth: Remove unnecessary NULL pointer checkGuenter Roeck
ipheth_carrier_set() is called from two locations. In ipheth_carrier_check_work(), its parameter 'dev' is set with container_of(work, ...) and can not be NULL. In ipheth_open(), dev is extracted from netdev_priv(net) and dereferenced before the call to ipheth_carrier_set(). The NULL pointer check of dev in ipheth_carrier_set() is therefore unnecessary and can be removed. Cc: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03net: dsa: mv88e6xxx: Pass interrupt number in platform dataAndrew Lunn
Allow an interrupt number to be passed in the platform data. The driver will then use it if not zero, otherwise it will poll for interrupts. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03Merge branch 'mv88e6xxx-Disable-ports-to-save-power'David S. Miller
Andrew Lunn says: ==================== mv88e6xxx: Disable ports to save power Save some power by disabling ports. The first patch fully disables a port when it is runtime disabled. The second disables any ports which are not used at all. Depending on configuration strapping, this can lower the temperature of an idle switch a few degrees. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03net: dsa :mv88e6xxx: Disable unused portsAndrew Lunn
If the NO_CPU strap is set, the switch starts in 'dumb hub' mode, with all ports enable. Ports which are then actively used are reconfigured as required when the driver starts. However unused ports are left alone. Change this to disable them, and turn off any SERDES interface. This could save some power and so reduce the temperature a bit. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03net: dsa: mv88e6xxx: Set STP disable state in port_disableAndrew Lunn
When requested to disable a port, set the port STP state to disabled. This fully disables the port and should save some power. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03hv_netvsc: fix race that may miss tx queue wakeupHaiyang Zhang
When the ring buffer is almost full due to RX completion messages, a TX packet may reach the "low watermark" and cause the queue stopped. If the TX completion arrives earlier than queue stopping, the wakeup may be missed. This patch moves the check for the last pending packet to cover both EAGAIN and success cases, so the queue will be reliably waked up when necessary. Reported-and-tested-by: Stephan Klein <stephan.klein@wegfinder.at> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2019-05-03 This series contains updates to the i40e driver only. Carolyn changes the driver behavior to now disable the VF after one MDD event instead of allowing a couple of MDD events before doing the reset. Aleksandr changes the driver to only report an error when a VF tries to remove VLAN when a port VLAN is configured, unless it is VLAN 0. Also extends the LLDP support to be able to keep the current LLDP state persistent across a power cycle. Maciej fixes the checksum calculation due to firmware changes, which requires the driver to perform a double shadow RAM dump in some cases. Adam adds advertising support for 40GBase_LR4, 40GBase_CR4 and fibre in the driver. Jake cleans up a check that is not needed and was producing a warning in GCC 8. Harshitha fixes a misleading message by ensuring that a success message is only printed on the host side when the promiscuous mode change has been successful. Stefan Assmann adds the vendor id and device id to the dmesg log entry during probe to help with bug reports when lspci output may not be available. Alice and Piotr add recovery mode support in the i40e driver, which is needed for migrating from a structured to a flat firmware image. v2: Removed patch 1 "i40e: replace switch-statement to speed-up retpoline-enabled builds" from the series since it is no longer needed. Also updated the last patch in the series that introduces recovery mode support, to include a more detailed patch description and removed code not intended for the upstream kernel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: - PPC and ARM bugfixes from submaintainers - Fix old Windows versions on AMD (recent regression) - Fix old Linux versions on processors without EPT - Fixes for LAPIC timer optimizations * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits) KVM: nVMX: Fix size checks in vmx_set_nested_state KVM: selftests: make hyperv_cpuid test pass on AMD KVM: lapic: Check for in-kernel LAPIC before deferencing apic pointer KVM: fix KVM_CLEAR_DIRTY_LOG for memory slots of unaligned size x86/kvm/mmu: reset MMU context when 32-bit guest switches PAE KVM: x86: Whitelist port 0x7e for pre-incrementing %rip Documentation: kvm: fix dirty log ioctl arch lists KVM: VMX: Move RSB stuffing to before the first RET after VM-Exit KVM: arm/arm64: Don't emulate virtual timers on userspace ioctls kvm: arm: Skip stage2 huge mappings for unaligned ipa backed by THP KVM: arm/arm64: Ensure vcpu target is unset on reset failure KVM: lapic: Convert guest TSC to host time domain if necessary KVM: lapic: Allow user to disable adaptive tuning of timer advancement KVM: lapic: Track lapic timer advance per vCPU KVM: lapic: Disable timer advancement if adaptive tuning goes haywire x86: kvm: hyper-v: deal with buggy TLB flush requests from WS2012 KVM: x86: Consider LAPIC TSC-Deadline timer expired if deadline too short KVM: PPC: Book3S: Protect memslots while validating user address KVM: PPC: Book3S HV: Perserve PSSCR FAKE_SUSPEND bit on guest exit KVM: arm/arm64: vgic-v3: Retire pending interrupts on disabling LPIs ...
2019-05-03parisc: Update huge TLB page support to use per-pagetable spinlockJohn David Anglin
This patch updates the parisc huge TLB page support to use per-pagetable spinlocks. This patch requires Mikulas' per-pagetable spinlock patch and the revised TLB serialization patch from Helge and myself. With Mikulas' patch, we need to use the per-pagetable spinlock for page table updates. The TLB lock is only used to serialize TLB flushes on machines with the Merced bus. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Use per-pagetable spinlockMikulas Patocka
PA-RISC uses a global spinlock to protect pagetable updates in the TLB fault handlers. When multiple cores are taking TLB faults simultaneously, the cache line containing the spinlock becomes a bottleneck. This patch embeds the spinlock in the top level page directory, so that every process has its own lock. It improves performance by 30% when doing parallel compilations. At least on the N class systems, only one PxTLB inter processor broadcast can be active at any one time on the Merced bus. If a Merced bus is found, this patch serializes the TLB flushes with the pa_tlb_flush_lock spinlock. v1: Initial patch by Mikulas v2: Added Merced detection by Helge v3: Revised TLB serialization by Dave & Helge Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Allow live-patching of __meminit functionsHelge Deller
When making the text sections writeable with set_kernel_text_rw(1), include all text sections including those in the __init section. Otherwise functions marked with __meminit will stay read-only. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # 4.20+
2019-05-03parisc: Add memory barrier to asm pdc and sync instructionsHelge Deller
Add compiler memory barriers to ensure the compiler doesn't reorder memory operations around these instructions. Cc: stable@vger.kernel.org # v4.20+ Fixes: 3847dab77421 ("parisc: Add alternative coding infrastructure") Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Add memory clobber to TLB purgesJohn David Anglin
The pdtlb and pitlb instructions are strongly ordered. The asms invoking these instructions should be compiler memory barriers to ensure the compiler doesn't reorder memory operations around these instructions. Signed-off-by: John David Anglin <dave.anglin@bell.net> CC: stable@vger.kernel.org # v4.20+ Fixes: 3847dab77421 ("parisc: Add alternative coding infrastructure") Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Use ldcw instruction for SMP spinlock release barrierJohn David Anglin
There are only a couple of instructions that can function as a memory barrier on parisc. Currently, we use the sync instruction as a memory barrier when releasing a spinlock. However, the ldcw instruction is a better barrier when we have a handy memory location since it operates in the cache on coherent machines. This patch updates the spinlock release code to use ldcw. I also changed the "stw,ma" instructions to "stw" instructions as it is not an adequate barrier. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Remove lock code to serialize TLB operations in pacache.SJohn David Anglin
TLB operations only need to be serialized on machines with the Merced (Stretch) bus. The only machines in this category are L and N class, and they require a 64-bit PA 2.0 kernel. On these machines, we use local TLB purges in the tmpalias routines. We don't need to serialize TLB purges on all other machines. Thus, the lock/unlock code can be removed when CONFIG_PA20 is not defined. Further, when CONFIG_PA20 is not defined, alternative patching converts the TLB purges to local purges when PA 2.0 hardware has been detected. Signed-off-by: John David Anglin <dave.anglin@bell.net> Tested-By: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Switch from DISCONTIGMEM to SPARSEMEMHelge Deller
The commit 1c30844d2dfe ("mm: reclaim small amounts of memory when an external fragmentation event occurs") breaks memory management on a parisc c8000 workstation with this memory layout: 0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB 1) Start 0x0000000100000000 End 0x00000001bfdfffff Size 3070 MB 2) Start 0x0000004040000000 End 0x00000040ffffffff Size 3072 MB With the patch 1c30844d2dfe, the kernel will incorrectly reclaim the first zone when it fills up, ignoring the fact that there are two completely free zones. Basiscally, it limits cache size to 1GiB. The parisc kernel is currently using the DISCONTIGMEM implementation, but isn't NUMA. Avoid this issue or strange work-arounds by switching to the more commonly used SPARSEMEM implementation. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 1c30844d2dfe ("mm: reclaim small amounts of memory when an external fragmentation event occurs") Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: enable wide mode earlySven Schnelle
The idle task might have been allocated above 4GB. With the current code we cannot access that memory because the CPU is still running in narrow mode. This was found on a J5000 machine and the patch is required to enable SPARSEMEM on that machine. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: update feature listsSven Schnelle
Update lists to reflect that we have now KGDB and kretprobes support. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Show n/a if product number not availableHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: remove unused flags parameter in __patch_text()Sven Schnelle
It's not used by patch_map()/patch_unmap(), so lets remove it. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
generated by cgit (git 2.34.1) at 2025-09-13 02:21:37 +0000