summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-03doc: update kprobes supported architecture listSven Schnelle
Now that kprobes and kretprobes are implemented, update the list in Documentation to reflect that. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Implement kretprobesSven Schnelle
Implement kretprobes on parisc, parts stolen from powerpc. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: remove kprobes.h from generic-ySven Schnelle
We're providing our own version now. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Implement kprobesSven Schnelle
Implement kprobes support for PA-RISC. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: add functions required by KPROBE_EVENTSSven Schnelle
implement regs_get_register(), regs_get_kernel_stack_nth() and regs_within_kernel_stack() Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: PA-Linux requires at least 32 MB RAMHelge Deller
Even a 32-bit kernel requires at least 27 MB to decompress itself, so halt the system with a message if the system has less memory than 32 MB. Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Skip registering LED when running in QEMUHelge Deller
No need to spend CPU cycles when we run on QEMU. Signed-off-by: Helge Deller <deller@gmx.de> CC: stable@vger.kernel.org # v4.9+
2019-05-03parisc: Tune LASI LAN for QEMUHelge Deller
Do not loose cycles when we run on QEMU, and fix one trivial typo. Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Export running_on_qemu symbol for modulesHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> CC: stable@vger.kernel.org # v4.9+
2019-05-03parisc: add KGDB supportSven Schnelle
This patch add KGDB support to PA-RISC. It also implements single-stepping utilizing the recovery counter. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: add parisc code patchingSven Schnelle
Instead of re-mapping the whole kernel text with RWX rights add a patch_text() which can be used to replace instructions in the kernel .text section. Based on the ARM implementation. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: add set_fixmap()/clear_fixmap()Sven Schnelle
These functions will be used for adding code patching functions later. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03parisc: Consider stack randomization for mmap base only when necessaryAlexandre Ghiti
Do not offset mmap base address because of stack randomization if current task does not want randomization. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03i40e: Introduce recovery mode supportAlice Michael
This patch introduces "recovery mode" to the i40e driver. It is part of a new Any2Any idea of upgrading the firmware. In this approach, it is required for the driver to have support for "transition firmware", that is used for migrating from structured to flat firmware image. In this new, very basic mode, i40e driver must be able to handle particular IOCTL calls from the NVM Update Tool and run a small set of AQ commands. These additional AQ commands are part of the interface used by the NVMUpdate tool. The NVMUpdate tool contains all of the necessary logic to reference these new AQ commands. The end user experience remains the same, they are using the NVMUpdate tool to update the NVM contents. Signed-off-by: Alice Michael <alice.michael@intel.com> Signed-off-by: Piotr Marczak <piotr.marczak@intel.com> Tested-by: Don Buchholz <donald.buchholz@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: print PCI vendor and device ID during probeStefan Assmann
Printing each devices PCI vendor and device ID has the advantage of easily revealing what hardware we're dealing with exactly. It's no longer necessary to match the PCI bus information to the lspci output. Helps with bug reports where no lspci output is available. Output before i40e 0000:08:00.0: fw 6.1.49420 api 1.7 nvm 6.80 0x80003c64 1.2007.0 and after i40e 0000:08:00.0: fw 6.1.49420 api 1.7 nvm 6.80 0x80003c64 1.2007.0 [8086:1572] [8086:0004] Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: fix misleading message about promisc setting on un-trusted VFHarshitha Ramamurthy
A refactor of the i40e_vc_config_promiscuous_mode_msg function moved the check for un-trusted VF into another function. We have to lie to an un-trusted VF that its request to set promiscuous mode is successful even when it is not because we don't want the VF to find out its trust status this way. With the refactor, we were running into a case where even though we were not setting promiscuous mode for an un-trusted VF, we still printed a misleading message that it was successful. This patch fixes that by ensuring that a success message is printed on the host side only when the promiscuous mode change has been successful. Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: update version numberAlice Michael
Just bumping the version number appropriately. Signed-off-by: Alice Michael <alice.michael@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: remove out-of-range comparisons in i40e_validate_cloud_filterJacob Keller
The function i40e_validate_cloud_filter checks that the destination and source port numbers are valid by attempting to ensure that the number is non-zero and no larger than 0xFFFF. However, the types for the dst_port and src_port variable are __be16 which by definition cannot be larger than 0xFFFF Since these values cannot be larger than 2 bytes, the check to see if they exceed 0xFFFF is meaningless. One might consider these checks as some sort of defensive coding, in case the type was later changed. However, these checks also byte-swap the value before comparison using be16_to_cpu, which will truncate the values to 16bits anyways. Additionally, changing the type would require updating the opcodes to support new data layout of these virtchnl commands. Remove the check to silence the -Wtype-limits warning that was added to GCC 8. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: Further implementation of LLDPAleksandr Loktionov
This code implements driver code changes necessary for LLDP Agent support. Modified i40e_aq_start_lldp() and i40e_aq_stop_lldp() adding false parameter whether LLDP state should be persistent across power cycles. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: Report advertised link modes on 40GBase_LR4, CR4 and fibreAdam Ludkiewicz
Add assignments for advertising 40GBase_LR4, 40GBase_CR4 and fibre Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: ShadowRAM checksum calculation changeMaciej Paczkowski
Due to changes in FW the SW is required to perform double SR dump in some cases. Implementation adds two new steps to update nvm checksum function: * recalculate checksum and check if checksum in NVM is correct * if checksum in NVM is not correct then update it again Signed-off-by: Maciej Paczkowski <maciej.paczkowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: remove error msg when vf with port vlan tries to remove vlan 0Aleksandr Loktionov
VF's attempt to delete vlan 0 when a port vlan is configured is harmless in this case pf driver just does nothing. If vf will try to remove other vlans when a port vlan is configured it will still produce error as before. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: change behavior on PF in response to MDD eventCarolyn Wyborny
TX MDD events reported on the PF are the result of the PF misconfiguring a descriptor and not because of "bad actions" by anything else. No need to reset now because if it results in a Tx hang, the Tx hang check will take care of it. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: Fix for allowing too many MDD events on VFCarolyn Wyborny
This patch changes the driver behavior when detecting a VF MDD event. It now disables the VF after one event, which indicates a hw detected problem in the VF. Before this change, the PF would allow a couple of events before doing the reset. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03hwmon: (lm75) Add support for TMP75BIker Perez del Palomar Sustatxa
The TMP75B has a different control register, supports 12-bit resolution and the default conversion rate is 37 Hz. Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-05-03dt-bindings: hwmon: Add tmp75b to lm75.txtIker Perez del Palomar Sustatxa
Update the LM75's devicetree definition to allow Texas Instruments TMP75B be probed. Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-05-03livepatch: Remove duplicated code for early initializationPetr Mladek
kobject_init() call added one more operation that has to be done when doing the early initialization of both static and dynamic livepatch structures. It would have been easier when the early initialization code was not duplicated. Let's deduplicate it for future generations of livepatching hackers. The patch does not change the existing behavior. Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-05-03livepatch: Remove custom kobject state handlingPetr Mladek
kobject_init() always succeeds and sets the reference count to 1. It allows to always free the structures via kobject_put() and the related release callback. Note that the custom kobject state handling was used only because we did not know that kobject_put() can and actually should get called even when kobject_init_and_add() fails. The patch should not change the existing behavior. Suggested-by: "Tobin C. Harding" <tobin@kernel.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-05-03Merge branch 'i2c/for-current-fixed' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C driver bugfixes and a MAINTAINERS update for you" * 'i2c/for-current-fixed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Prevent runtime suspend of adapter when Host Notify is required i2c: synquacer: fix enumeration of slave devices MAINTAINERS: friendly takeover of i2c-gpio driver i2c: designware: ratelimit 'transfer when suspended' errors i2c: imx: correct the method of getting private data in notifier_call
2019-05-03nohz_full: Allow the boot CPU to be nohz_fullNicholas Piggin
Allow the boot CPU/CPU0 to be nohz_full. Have the boot CPU take the do_timer duty during boot until a housekeeping CPU can take over. This is supported when CONFIG_PM_SLEEP_SMP is not configured, or when it is configured and the arch allows suspend on non-zero CPUs. nohz_full has been trialed at a large supercomputer site and found to significantly reduce jitter. In order to deploy it in production, they need CPU0 to be nohz_full because their job control system requires the application CPUs to start from 0, and the housekeeping CPUs are placed higher. An equivalent job scheduling that uses CPU0 for housekeeping could be achieved by modifying their system, but it is preferable if nohz_full can support their environment without modification. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lkml.kernel.org/r/20190411033448.20842-6-npiggin@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03sched/isolation: Require a present CPU in housekeeping maskNicholas Piggin
During housekeeping mask setup, currently a possible CPU is required. That does not guarantee the CPU would be available at boot time, so check to ensure that at least one present CPU is in the mask. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lkml.kernel.org/r/20190411033448.20842-5-npiggin@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03kernel/cpu: Allow non-zero CPU to be primary for suspend / kexec freezeNicholas Piggin
This patch provides an arch option, ARCH_SUSPEND_NONZERO_CPU, to opt-in to allowing suspend to occur on one of the housekeeping CPUs rather than hardcoded CPU0. This will allow CPU0 to be a nohz_full CPU with a later change. It may be possible for platforms with hardware/firmware restrictions on suspend/wake effectively support this by handing off the final stage to CPU0 when kernel housekeeping is no longer required. Another option is to make housekeeping / nohz_full mask dynamic at runtime, but the complexity could not be justified at this time. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lkml.kernel.org/r/20190411033448.20842-4-npiggin@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03power/suspend: Add function to disable secondaries for suspendNicholas Piggin
This adds a function to disable secondary CPUs for suspend that are not necessarily non-zero / non-boot CPUs. Platforms will be able to use this to suspend using non-zero CPUs. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lkml.kernel.org/r/20190411033448.20842-3-npiggin@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03intel_th: msu: Add current window trackingAlexander Shishkin
Now that we have a way to switch between MSC buffer windows, add code to track the current window. The hardware register NWSA that contains the address of the next window is unfortunately not always usable, and since the driver has full control of the window switching, there is no reason not to keep this on the software side. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03intel_th: msu: Add a sysfs attribute to trigger window switchAlexander Shishkin
Now that we have the means to trigger a window switch for the MSU trace store, add a sysfs file to allow triggering it from userspace. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03intel_th: msu: Correct the block wrap detectionAlexander Shishkin
In multi window mode the MSU will set "window wrap" bit to indicate block wrapping as well. Take this into account when checking data blocks. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03intel_th: Add switch triggering supportAlexander Shishkin
Add support for asserting window switch trigger when tracing to MSU output ports. This allows for software controlled switching between windows of the MSU buffer, which can be used for double buffering while exporting the trace data further from the MSU. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03intel_th: gth: Factor out trace start/stopAlexander Shishkin
The trace enable/disable functions of the GTH include the code that starts and stops trace flom from the sources. This start/stop functionality will also be used in the window switch trigger sequence. Factor out start/stop code from the larger trace enable/disable code in preparation for the window switch sequence. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03intel_th: msu: Factor out pipeline drainingAlexander Shishkin
The code that waits for the pipeline empty condition of the MSU is currently called in the path that disables the trace. We will also need this in the window switch trigger sequence. Therefore, factor out this code and make it accessible to the GTH device. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03intel_th: msu: Switch over to scatterlistAlexander Shishkin
Instead of using a home-grown array of pointers to the DMA pages, switch over to scatterlist data types and accessors, which has all the convenient accessors, can be used to batch-map DMA memory and is convenient for passing around between different layers, which will be useful when MSU buffer management has to cross the boundaries of the MSU driver. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03intel_th: msu: Replace open-coded list_{first,last,next}_entry variantsAlexander Shishkin
There are a few places in the code where open-coded versions of list entry accessors list_first_entry()/list_last_entry()/list_next_entry() are used. Replace those with the standard macros. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03intel_th: Only report useful IRQs to subdevicesAlexander Shishkin
The only type of IRQ triggering event that is useful to us at the moment is the "last block" interrupt of the MSU. This interrupt can only be enabled via "MINTCTL" register that doesn't exist in earlier version of the Intel TH. Enumerate the presence of MINTCTL via per-device driver data structure and only instantiate the IRQ resource for subdevices if this capability is present. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03intel_th: msu: Start handling IRQsAlexander Shishkin
We intend to use the interrupt to detect Last Block condition in the MSU driver, which we can use for double-buffering software-managed data transfers. Add an interrupt handler to the MSU driver. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03intel_th: pci: Use MSI interrupt signallingAlexander Shishkin
Since Intel TH is capable of MSI interrupt signalling, make use of it. The way it works is, each of the 7 interrupt triggering events has its own vector in this mode, as opposed to interrupt line delivery, where all events are signalled via the same line. Failing to enable MSI, the driver falls back to using an interrupt line. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03intel_th: Communicate IRQ via resourceAlexander Shishkin
Currently, the IRQ is passed between the glue layers and the core as a separate argument, while the MMIO resources are passed as resources. This also limits the number of IRQs thus used to one, while the current versions of Intel TH use a different MSI vector for each interrupt triggering event, of which there are 7. Change this to pass IRQ in the resources array. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03intel_th: Add "rtit" source deviceAlexander Shishkin
In some versions of Intel TH, the Software Trace Hub (STH) has a second MMIO BAR dedicated to the input from Intel PT. This calls for a new subdevice that will be enumerated if the corresponding BAR is present. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03intel_th: Skip subdevices if their MMIO is missingAlexander Shishkin
If a subdevice requires an MMIO region that wasn't in the resources passed down from the glue layer, don't instantiate it, but don't error out. This means that that particular subdevice doesn't exist for this instance of Intel TH, which is a perfectly normal situation. This applies, for example, to the "rtit" source device. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03intel_th: Rework resource passing between glue layers and coreAlexander Shishkin
Currently, MMIO resource numbers in the TH driver core correspond to PCI BAR numbers, because in the beginning there was only the PCI glue layer. This created some confusion when the ACPI glue layer was added. To avoid confusion and remove glue-specific code from the driver core, split the resource indices between core and glue layers and change the API so that the driver core receives the MMIO resources in the same fixed order. At the same time, make the IRQ always be a parameter to intel_th_alloc() instead of sometimes passing it as a resource. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03intel_th: SPDX-ify the documentationAlexander Shishkin
Add the SPDX header to the Intel TH documentation. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-03intel_th: msu: Fix single mode with IOMMUAlexander Shishkin
Currently, the pages that are allocated for the single mode of MSC are not mapped into the device's dma space and the code is incorrectly using *_to_phys() in place of a dma address. This fails with IOMMU enabled and is otherwise bad practice. Fix the single mode buffer allocation to map the pages into the device's DMA space. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: ba82664c134e ("intel_th: Add Memory Storage Unit driver") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-13 21:26:49 +0000