summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-11stm class: heartbeat: Fix whitespaceAlexander Shishkin
Fix whitespace in the code for better readability, no functional changes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: SPDX-ify the documentationAlexander Shishkin
Add the SPDX header to the STM class documentation. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Update documentation to match the new identification rulesAlexander Shishkin
The rules and order of identification of trace sources against the "stp-policy" have changed; update the documentation to reflect that. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Document the MIPI SyS-T protocol usageAlexander Shishkin
Add a document describing MIPI SyS-T protocol driver usage. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: p_sys-t: Document the configfs interfaceAlexander Shishkin
This adds ABI documentation for the new configfs attributes that come with the MIPI SyS-T protocol driver. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: p_sys-t: Add support for CLOCKSYNC packetsAlexander Shishkin
This adds support for CLOCKSYNC SyS-T packets, that establish correlation between the transport clock (STP timestamps) and SyS-T timestamps. These packets are sent periodically to allow the decoder to keep both time sources in sync. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Add MIPI SyS-T protocol supportAlexander Shishkin
This adds support for MIPI SyS-T protocol as specified in an open standard [1]. In addition to marking message boundaries, it also supports tagging messages with the source UUID, to provide better distinction between trace sources, including payload length and timestamp in the message's metadata. This driver adds attributes to STP policy nodes to control/configure these metadata features. [1] https://www.mipi.org/specifications/sys-t Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Switch over to the protocol driverAlexander Shishkin
Now that the default framing protocol is factored out into its own driver, switch over to using the driver for writing data. To that end, make the policy code require a valid protocol name (or absence thereof, which is equivalent to "p_basic"). Also, to make transition easier, make stm class request "p_basic" module at initialization time. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Factor out default framing protocolAlexander Shishkin
The STP framing pattern that the stm class implicitly applies to the data payload is, in fact, a protocol. This patch moves the relevant code out of the stm core into its own driver module. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Add a helper for writing data packetsAlexander Shishkin
Add a helper to write a sequence of bytes as STP data packets. This is used by protocol drivers to output their metadata, as well as the actual data payload. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Introduce framing protocol driversAlexander Shishkin
At the moment, the stm class applies a certain STP framing pattern to the data as it is written to the underlying STM device. In order to allow different framing patterns (aka protocols), this patch introduces the concept of STP protocol drivers, defines data structures and APIs for the protocol drivers to use. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Clean up stp_configfs_initAlexander Shishkin
Minor code shortening, no functional changes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Clarify configfs root type/operations namesAlexander Shishkin
The current naming of stp-policy root type and group ops is confusing, rename them for better readability. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Rework policy node fallbackAlexander Shishkin
Currently, if no matching policy node can be found for a trace source, we'll try to use "default" policy node, then, if that doesn't exist, we'll pick the first node, in order of creation. If that also fails, we'll allocate M/C range from the beginning of the device's M/C range. This makes it difficult to know which node (if any) was used in any particular case. In order to make things more deterministic, the new order is as follows: * if they supply ID string, use that and nothing else, * if they are a task, use their task name (comm), * use "default", if it exists, * return failure, to let them know there is no suitable rule. This should provide enough convenience with the "default" catch-all node, while not leaving *everything* to chance. As a side effect, this relaxes the requirement of using ioctl() for identification with the possibility of using task names as policy nodes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11netfilter: nft_compat: do not dump private areaPablo Neira Ayuso
Zero pad private area, otherwise we expose private kernel pointer to userspace. This patch also zeroes the tail area after the ->matchsize and ->targetsize that results from XT_ALIGN(). Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Reported-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-10-11netfilter: xt_TEE: add missing code to get interface index in checkentry.Taehee Yoo
checkentry(tee_tg_check) should initialize priv->oif from dev if possible. But only netdevice notifier handler can set that. Hence priv->oif is always -1 until notifier handler is called. Fixes: 9e2f6c5d78db ("netfilter: Rework xt_TEE netdevice notifier") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-10-11netfilter: xt_TEE: fix wrong interface selectionTaehee Yoo
TEE netdevice notifier handler checks only interface name. however each netns can have same interface name. hence other netns's interface could be selected. test commands: %ip netns add vm1 %iptables -I INPUT -p icmp -j TEE --gateway 192.168.1.1 --oif enp2s0 %ip link set enp2s0 netns vm1 Above rule is in the root netns. but that rule could get enp2s0 ifindex of vm1 by notifier handler. After this patch, TEE rule is added to the per-netns list. Fixes: 9e2f6c5d78db ("netfilter: Rework xt_TEE netdevice notifier") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-10-11netfilter: nft_osf: usage from output path is not validFernando Fernandez Mancera
The nft_osf extension, like xt_osf, is not supported from the output path. Fixes: b96af92d6eaf ("netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf") Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-10-11netfilter: nft_set_rbtree: allow loose matching of closing element in intervalPablo Neira Ayuso
Allow to find closest matching for the right side of an interval (end flag set on) so we allow lookups in inner ranges, eg. 10-20 in 5-25. Fixes: ba0e4d9917b4 ("netfilter: nf_tables: get set elements via netlink") Reported-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-10-11sched/completions/Documentation: Clean up the document some moreIngo Molnar
Refresh the document: - Remove unnecessary liguistic complexity and improve the clarity of the text - Improve the explanations all around - Remove unnecessary and stale version info - Fix whitespace noise - Make pseudo-code match kernel style - Fix minor syntax errors in pseudo-code - Use consistent denotation - Mark multi-CPU sequences more explicitly - Unbreak line breaks - Use quotes to refer to 'struct completion' - Use 'IRQ context' and 'IRQs' consistently - Improve grammar - etc. Cc: John Garry <john.garry@huawei.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicholas Mc Guire <hofrat@osadl.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: corbet@lwn.net Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1539183392-239389-1-git-send-email-john.garry@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-11sched/completions/Documentation: Fix a couple of punctuation nitsJohn Garry
This patch fixes a couple of punctuation nits which can make the document more correct and readable. Also missing "()" are added to some function references for consistency. Signed-off-by: John Garry <john.garry@huawei.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: corbet@lwn.net Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1539183392-239389-1-git-send-email-john.garry@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-11selftests: bpf: install script with_addr.shAnders Roxell
When test_flow_dissector.sh runs it complains that it can't find script with_addr.sh: ./test_flow_dissector.sh: line 81: ./with_addr.sh: No such file or directory Rework so that with_addr.sh gets installed, add it to TEST_PROGS_EXTENDED variable. Fixes: 50b3ed57dee9 ("selftests/bpf: test bpf flow dissection") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-11selftests: bpf: add config fragment LWTUNNELAnders Roxell
When test_lwt_seg6local.sh was added commit c99a84eac026 ("selftests/bpf: test for seg6local End.BPF action") config fragment wasn't added, and without CONFIG_LWTUNNEL enabled we see this: Error: CONFIG_LWTUNNEL is not enabled in this kernel. selftests: test_lwt_seg6local [FAILED] Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-11bpftool: Allow add linker flags via EXTRA_LDFLAGS variableJiri Olsa
Adding EXTRA_LDFLAGS allowing user to specify extra flags for LD_FLAGS variable. Also adding LDFLAGS to build command line. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-11bpftool: Allow to add compiler flags via EXTRA_CFLAGS variableJiri Olsa
Adding EXTRA_CFLAGS allowing user to specify extra flags for CFLAGS variable. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-11xsk: do not call synchronize_net() under RCU read lockBjörn Töpel
The XSKMAP update and delete functions called synchronize_net(), which can sleep. It is not allowed to sleep during an RCU read section. Instead we need to make sure that the sock sk_destruct (xsk_destruct) function is asynchronously called after an RCU grace period. Setting the SOCK_RCU_FREE flag for XDP sockets takes care of this. Fixes: fbfc504a24f5 ("bpf: introduce new bpf AF_XDP map type BPF_MAP_TYPE_XSKMAP") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-10Merge branch 'hns3-next'David S. Miller
Salil Mehta says: ==================== Adds support of RSS to HNS3 Driver for Rev 2(=0x21) H/W This patch-set mainly adds new additions related to RSS for the new hardware Revision 0x21. It also adds support to use RSS hash value provided by the hardware along with descriptor. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: hns3: Add HW RSS hash information to RX skbPeng Li
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: hns3: Add RSS tuples support for VFJian Shen
This patch adds RSS tuple support for VF in revision 0x21. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: hns3: Add RSS general configuration support for VFJian Shen
This patch adds RSS key, hash algorithm configuration support for VF in revision 0x21. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: hns3: Add new RSS hash algorithm support for PFJian Shen
This patch adds ETH_RSS_HASH_XOR hash algorithm supports, which is supported by hw revision 0x21. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interfaceGiacinto Cifelli
Added support for Gemalto's Cinterion ALASxx WWAN interfaces by adding QMI_FIXED_INTF with Cinterion's VID and PID. Signed-off-by: Giacinto Cifelli <gciofono@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10tipc: queue socket protocol error messages into socket receive bufferParthasarathy Bhuvaragan
In tipc_sk_filter_rcv(), when we detect protocol messages with error we call tipc_sk_conn_proto_rcv() and let it reset the connection and notify the socket by calling sk->sk_state_change(). However, tipc_sk_filter_rcv() may have been called from the function tipc_backlog_rcv(), in which case the socket lock is held and the socket already awake. This means that the sk_state_change() call is ignored and the error notification lost. Now the receive queue will remain empty and the socket sleeps forever. In this commit, we convert the protocol message into a connection abort message and enqueue it into the socket's receive queue. By this addition to the above state change we cover all conditions. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10tipc: set link tolerance correctly in broadcast linkJon Maloy
In the patch referred to below we added link tolerance as an additional criteria for declaring broadcast transmission "stale" and resetting the affected links. However, the 'tolerance' field of the broadcast link is never set, and remains at zero. This renders the whole commit without the intended improving effect, but luckily also with no negative effect. In this commit we add the missing initialization. Fixes: a4dc70d46cf1 ("tipc: extend link reset criteria for stale packet retransmission") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10phy: phy-ocelot-serdes: fix return value check in serdes_probe()Wei Yongjun
In case of error, the function syscon_node_to_regmap() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 51f6b410fc22 ("phy: add driver for Microsemi Ocelot SerDes muxing") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10Merge branch 'net-dsa-bcm_sf2-Couple-of-fixes'David S. Miller
Florian Fainelli says: ==================== net: dsa: bcm_sf2: Couple of fixes Here are two fixes for the bcm_sf2 driver that were found during testing unbind and analysing another issue during system suspend/resume. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: dsa: bcm_sf2: Call setup during switch resumeFlorian Fainelli
There is no reason to open code what the switch setup function does, in fact, because we just issued a switch reset, we would make all the register get their default values, including for instance, having unused port be enabled again and wasting power and leading to an inappropriate switch core clock being selected. Fixes: 8cfa94984c9c ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: dsa: bcm_sf2: Fix unbind orderingFlorian Fainelli
The order in which we release resources is unfortunately leading to bus errors while dismantling the port. This is because we set priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now permissible to clock gate the switch. Later on, when dsa_slave_destroy() comes in from dsa_unregister_switch() and calls dsa_switch_ops::port_disable, we perform the same dismantling again, and this time we hit registers that are clock gated. Make sure that dsa_unregister_switch() is the first thing that happens, which takes care of releasing all user visible resources, then proceed with clock gating hardware. We still need to set priv->wol_ports_mask to 0 to make sure that an enabled port properly gets disabled in case it was previously used as part of Wake-on-LAN. Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: sched: avoid writing on noop_qdiscEric Dumazet
While noop_qdisc.gso_skb and noop_qdisc.skb_bad_txq are not used in other places, it seems not correct to overwrite their fields in dev_init_scheduler_queue(). noop_qdisc is essentially a shared and read-only object, even if it is not marked as const because of some implementation detail. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net/mpls: Implement handler for strict data checking on dumpsDavid Ahern
Without CONFIG_INET enabled compiles fail with: net/mpls/af_mpls.o: In function `mpls_dump_routes': af_mpls.c:(.text+0xed0): undefined reference to `ip_valid_fib_dump_req' The preference is for MPLS to use the same handler as ipv4 and ipv6 to allow consistency when doing a dump for AF_UNSPEC which walks all address families invoking the route dump handler. If INET is disabled then fallback to an MPLS version which can be tighter on the data checks. Fixes: e8ba330ac0c5 ("rtnetlink: Update fib dumps for strict data checking") Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10Merge branch 'net-ipv4-fixes-for-PMTU-when-link-MTU-changes'David S. Miller
Sabrina Dubroca says: ==================== net: ipv4: fixes for PMTU when link MTU changes The first patch adapts the changes that commit e9fa1495d738 ("ipv6: Reflect MTU changes on PMTU of exceptions for MTU-less routes") did in IPv6 to IPv4: lower PMTU when the first hop's MTU drops below it, and raise PMTU when the first hop was limiting PMTU discovery and its MTU is increased. The second patch fixes bugs introduced in commit d52e5a7e7ca4 ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu") that only appear once the first patch is applied. Selftests for these cases were introduced in net-next commit e44e428f59e4 ("selftests: pmtu: add basic IPv4 and IPv6 PMTU tests") v2: add cover letter, and fix a few small things in patch 1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: ipv4: don't let PMTU updates increase route MTUSabrina Dubroca
When an MTU update with PMTU smaller than net.ipv4.route.min_pmtu is received, we must clamp its value. However, we can receive a PMTU exception with PMTU < old_mtu < ip_rt_min_pmtu, which would lead to an increase in PMTU. To fix this, take the smallest of the old MTU and ip_rt_min_pmtu. Before this patch, in case of an update, the exception's MTU would always change. Now, an exception can have only its lock flag updated, but not the MTU, so we need to add a check on locking to the following "is this exception getting updated, or close to expiring?" test. Fixes: d52e5a7e7ca4 ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: ipv4: update fnhe_pmtu when first hop's MTU changesSabrina Dubroca
Since commit 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions"), exceptions get deprecated separately from cached routes. In particular, administrative changes don't clear PMTU anymore. As Stefano described in commit e9fa1495d738 ("ipv6: Reflect MTU changes on PMTU of exceptions for MTU-less routes"), the PMTU discovered before the local MTU change can become stale: - if the local MTU is now lower than the PMTU, that PMTU is now incorrect - if the local MTU was the lowest value in the path, and is increased, we might discover a higher PMTU Similarly to what commit e9fa1495d738 did for IPv6, update PMTU in those cases. If the exception was locked, the discovered PMTU was smaller than the minimal accepted PMTU. In that case, if the new local MTU is smaller than the current PMTU, let PMTU discovery figure out if locking of the exception is still needed. To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU notifier. By the time the notifier is called, dev->mtu has been changed. This patch adds the old MTU as additional information in the notifier structure, and a new call_netdevice_notifiers_u32() function. Fixes: 5aad1de5ea2c ("ipv4: use separate genid for next hop exceptions") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net/ipv6: stop leaking percpu memory in fib6 infoMike Rapoport
The fib6_info_alloc() function allocates percpu memory to hold per CPU pointers to rt6_info, but this memory is never freed. Fix it. Fixes: a64efe142f5e ("net/ipv6: introduce fib6_info struct and helpers") Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10Merge branch 'fore200e-DMA-cleanups-and-fixes'David S. Miller
Christoph Hellwig says: ==================== fore200e DMA cleanups and fixes The fore200e driver came up during some dma-related audits, so here is the fallout. Compile tested (x86 & sparc) only. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10fore200e: check for dma mapping failuresChristoph Hellwig
The driver was lacking any handling for failures from the DMA mapping routines. With an iommu or swiotlb this can be fatal. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10fore200e: don't use GFP_DMAChristoph Hellwig
The driver properly uses the DMA mapping API, so it should not pointlessly dip into the GFP_DMA pool, which is only 16MB on x86. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10fore200e: devirtualize dma alloc callsChristoph Hellwig
There is no need for an indirection before calling the dma alloc routines now that we store a struct device in struct fore200e. Also remove the pointless GFP_ATOMIC for the sbus case, and fix the up the error handling by removing the 0 dma_addr test - some iommus can return 0 as a perfectly valid bus address. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10fore200e: devirtualize dma mapping callsChristoph Hellwig
There is no need for an indirection before calling the dma mapping routines now that we store a struct device in struct fore200e. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10fore200e: remove the align_size field of struct chunkChristoph Hellwig
There is no need for this field, as the only user of it can just use the local size variable instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-24 13:30:06 +0000