summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-07-23virtio/console: Add pipe_lock/unlock for splice_writeYoshihiro YUNOMAE
Add pipe_lock/unlock for splice_write to avoid oops by following competition: (1) An application gets fds of a trace buffer, virtio-serial, pipe. (2) The application does fork() (3) The processes execute splice_read(trace buffer) and splice_write(virtio-serial) via same pipe. <parent> <child> get fds of a trace buffer, virtio-serial, pipe | fork()----------create--------+ | | splice(read) | ---+ splice(write) | +-- no competition | splice(read) | | splice(write) ---+ | | splice(read) | splice(write) splice(read) ------ competition | splice(write) Two processes share a pipe_inode_info structure. If the child execute splice(read) when the parent tries to execute splice(write), the structure can be broken. Existing virtio-serial driver does not get lock for the structure in splice_write, so this competition will induce oops. <oops messages> BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff811a6b5f>] splice_from_pipe_feed+0x6f/0x130 PGD 7223e067 PUD 72391067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: lockd bnep bluetooth rfkill sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_timer snd soundcore pcspkr virtio_net virtio_balloon i2c_piix4 i2c_core microcode uinput floppy CPU: 0 PID: 1072 Comm: compete-test Not tainted 3.10.0ws+ #55 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 task: ffff880071b98000 ti: ffff88007b55e000 task.ti: ffff88007b55e000 RIP: 0010:[<ffffffff811a6b5f>] [<ffffffff811a6b5f>] splice_from_pipe_feed+0x6f/0x130 RSP: 0018:ffff88007b55fd78 EFLAGS: 00010287 RAX: 0000000000000000 RBX: ffff88007b55fe20 RCX: 0000000000000000 RDX: 0000000000001000 RSI: ffff88007a95ba30 RDI: ffff880036f9e6c0 RBP: ffff88007b55fda8 R08: 00000000000006ec R09: ffff880077626708 R10: 0000000000000003 R11: ffffffff8139ca59 R12: ffff88007a95ba30 R13: 0000000000000000 R14: ffffffff8139dd00 R15: ffff880036f9e6c0 FS: 00007f2e2e3a0740(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000018 CR3: 0000000071bd1000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffff8139ca59 ffff88007b55fe20 ffff880036f9e6c0 ffffffff8139dd00 ffff8800776266c0 ffff880077626708 ffff88007b55fde8 ffffffff811a6e8e ffff88007b55fde8 ffffffff8139ca59 ffff880036f9e6c0 ffff88007b55fe20 Call Trace: [<ffffffff8139ca59>] ? alloc_buf.isra.13+0x39/0xb0 [<ffffffff8139dd00>] ? virtcons_restore+0x100/0x100 [<ffffffff811a6e8e>] __splice_from_pipe+0x7e/0x90 [<ffffffff8139ca59>] ? alloc_buf.isra.13+0x39/0xb0 [<ffffffff8139d739>] port_fops_splice_write+0xe9/0x140 [<ffffffff8127a3f4>] ? selinux_file_permission+0xc4/0x120 [<ffffffff8139d650>] ? wait_port_writable+0x1b0/0x1b0 [<ffffffff811a6fe0>] do_splice_from+0xa0/0x110 [<ffffffff811a951f>] SyS_splice+0x5ff/0x6b0 [<ffffffff8161facf>] tracesys+0xdd/0xe2 Code: 49 8b 87 80 00 00 00 4c 8d 24 d0 8b 53 04 41 8b 44 24 0c 4d 8b 6c 24 10 39 d0 89 03 76 02 89 13 49 8b 44 24 10 4c 89 e6 4c 89 ff <ff> 50 18 85 c0 0f 85 aa 00 00 00 48 89 da 4c 89 e6 4c 89 ff 41 RIP [<ffffffff811a6b5f>] splice_from_pipe_feed+0x6f/0x130 RSP <ffff88007b55fd78> CR2: 0000000000000018 ---[ end trace 24572beb7764de59 ]--- V2: Fix a locking problem for error V3: Add Reviewed-by lines and stable@ line in sign-off area Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Amit Shah <amit.shah@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-23virtio/console: Quit from splice_write if pipe->nrbufs is 0Yoshihiro YUNOMAE
Quit from splice_write if pipe->nrbufs is 0 for avoiding oops in virtio-serial. When an application was doing splice from a kernel buffer to virtio-serial on a guest, the application received signal(SIGINT). This situation will normally happen, but the kernel executed a kernel panic by oops as follows: BUG: unable to handle kernel paging request at ffff882071c8ef28 IP: [<ffffffff812de48f>] sg_init_table+0x2f/0x50 PGD 1fac067 PUD 0 Oops: 0000 [#1] SMP Modules linked in: lockd sunrpc bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_timer snd microcode virtio_balloon virtio_net pcspkr soundcore i2c_piix4 i2c_core uinput floppy CPU: 1 PID: 908 Comm: trace-cmd Not tainted 3.10.0+ #49 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 task: ffff880071c64650 ti: ffff88007bf24000 task.ti: ffff88007bf24000 RIP: 0010:[<ffffffff812de48f>] [<ffffffff812de48f>] sg_init_table+0x2f/0x50 RSP: 0018:ffff88007bf25dd8 EFLAGS: 00010286 RAX: 0000001fffffffe0 RBX: ffff882071c8ef28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880071c8ef48 RBP: ffff88007bf25de8 R08: ffff88007fd15d40 R09: ffff880071c8ef48 R10: ffffea0001c71040 R11: ffffffff8139c555 R12: 0000000000000000 R13: ffff88007506a3c0 R14: ffff88007c862500 R15: ffff880071c8ef00 FS: 00007f0a3646c740(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff882071c8ef28 CR3: 000000007acbb000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff880071c8ef48 ffff88007bf25e20 ffff88007bf25e88 ffffffff8139d6fa ffff88007bf25e28 ffffffff8127a3f4 0000000000000000 0000000000000000 ffff880071c8ef48 0000100000000000 0000000000000003 ffff88007bf25e08 Call Trace: [<ffffffff8139d6fa>] port_fops_splice_write+0xaa/0x130 [<ffffffff8127a3f4>] ? selinux_file_permission+0xc4/0x120 [<ffffffff8139d650>] ? wait_port_writable+0x1b0/0x1b0 [<ffffffff811a6fe0>] do_splice_from+0xa0/0x110 [<ffffffff811a951f>] SyS_splice+0x5ff/0x6b0 [<ffffffff8161f8c2>] system_call_fastpath+0x16/0x1b Code: c1 e2 05 48 89 e5 48 83 ec 10 4c 89 65 f8 41 89 f4 31 f6 48 89 5d f0 48 89 fb e8 8d ce ff ff 41 8d 44 24 ff 48 c1 e0 05 48 01 c3 <48> 8b 03 48 83 e0 fe 48 83 c8 02 48 89 03 48 8b 5d f0 4c 8b 65 RIP [<ffffffff812de48f>] sg_init_table+0x2f/0x50 RSP <ffff88007bf25dd8> CR2: ffff882071c8ef28 ---[ end trace 86323505eb42ea8f ]--- It seems to induce pagefault in sg_init_tabel() when pipe->nrbufs is equal to zero. This may happen in a following situation: (1) The application normally does splice(read) from a kernel buffer, then does splice(write) to virtio-serial. (2) The application receives SIGINT when is doing splice(read), so splice(read) is failed by EINTR. However, the application does not finish the operation. (3) The application tries to do splice(write) without pipe->nrbufs. (4) The virtio-console driver tries to touch scatterlist structure sgl in sg_init_table(), but the region is out of bound. To avoid the case, a kernel should check whether pipe->nrbufs is empty or not when splice_write is executed in the virtio-console driver. V3: Add Reviewed-by lines and stable@ line in sign-off area. Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Amit Shah <amit.shah@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-22dmaengine: shdma: fix a build failure on platforms with no DMA supportGuennadi Liakhovetski
On platforms with no support for the shdma dmaengine driver build is currently failing with drivers/built-in.o: In function `sh_mobile_sdhi_probe': drivers/mmc/host/sh_mobile_sdhi.c:170: undefined reference to`shdma_chan_filter' Fix the breakage by defining shdma_chan_filter to NULL in such configurations. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> [horms+renesas@verge.net.au: Apply change to shdma-base.h instead of sh_dma.h] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-22ARM: STi: Set correct ARM ERRATAs.Srinivas Kandagatla
Some of the ARM_ERRATA selection is not done in the initial SOC support patches. This patch selects 2 new ARM_ERRATA's and removes one which was actually fixed. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> [olof: reorder new errata entries] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-22ARM: dts: STi: Fix pinconf setup for STiH416 serial2Srinivas Kandagatla
This patch fixes a bug in pinctrl setup of serial2 device, Some of the pins in the pinctrl node of serial2 do not belong to that pin-controller. This patch divides them in the pins into there respective pin controller nodes. Without this patch serial on StiH416-B2000 Board will not work as it fails with: "st-pinctrl pin-controller-rear.3: failed to get pin(99) name st-pinctrl pin-controller-rear.3: maps: function serial2 group serial2-0 num 4 pinconfig core: failed to register map default (3): no group/pin given" Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23cpufreq / intel_pstate: Change to scale off of max P-stateDirk Brandewie
Change to using max P-state instead of max turbo P-state. This change resolves two issues. On a quiet system intel_pstate can fail to respond to a load change. On CPU SKUs that have a limited number of P-states and no turbo range intel_pstate fails to select the highest available P-state. This change is suitable for stable v3.9+ References: https://bugzilla.kernel.org/show_bug.cgi?id=59481 Reported-and-tested-by: Arjan van de Ven <arjan@linux.intel.com> Reported-and-tested-by: dsmythies@telus.net Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-22Merge tag 'trace-3.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes and cleanups from Steven Rostedt: "This contains fixes, optimizations and some clean ups Some of the fixes need to go back to 3.10. They are minor, and deal mostly with incorrect ref counting in accessing event files. There was a couple of optimizations that should have perf perform a bit better when accessing trace events. And some various clean ups. Some of the clean ups are necessary to help in a fix to a theoretical race between opening a event file and deleting that event" * tag 'trace-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Kill the unbalanced tr->ref++ in tracing_buffers_open() tracing: Kill trace_array->waiter tracing: Do not (ab)use trace_seq in event_id_read() tracing: Simplify the iteration logic in f_start/f_next tracing: Add ref_data to function and fgraph tracer structs tracing: Miscellaneous fixes for trace_array ref counting tracing: Fix error handling to ensure instances can always be removed tracing/kprobe: Wait for disabling all running kprobe handlers tracing/perf: Move the PERF_MAX_TRACE_SIZE check into perf_trace_buf_prepare() tracing/syscall: Avoid perf_trace_buf_*() if sys_data->perf_events is empty tracing/function: Avoid perf_trace_buf_*() if event_function.perf_events is empty tracing: Typo fix on ring buffer comments tracing: Use trace_seq_puts()/trace_seq_putc() where possible tracing: Use correct config guard CONFIG_STACK_TRACER
2013-07-22Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: "These are fixes collected over the last week, they fixes several problems caused by the x86_pkg_temp_thermal introduced in 3.11-rc1. Specifics: - the x86_pkg_temp_thermal driver causes crash on systems with no package MSR support as there is a bug in the logic to check presence of DTHERM and PTS feature together. Added a change so that when there is no PTS support, module doesn't get loaded. - fix krealloc() misuse in pkg_temp_thermal_device_add(). If krealloc() returns NULL, it doesn't free the original. Thus if we want to exit because of the krealloc() failure, we must make sure the original one is freed. - The error code path of the x86 package temperature thermal driver's initialization routine makes an unbalanced call to get_online_cpus(), which causes subsequent CPU offline operations, and consequently system suspend, to permanently block in cpu_hotplug_begin() on systems where get_core_online() returns an error code. Remove the extra get_online_cpus() to fix the problem" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: Thermal: Fix lockup of cpu_down() Thermal: x86_pkg_temp: Limit number of pkg temp zones Thermal: x86_pkg_temp: fix krealloc() misuse in in pkg_temp_thermal_device_add() Thermal: x86 package temp thermal crash
2013-07-22Merge tag 'gpio-for-v3.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio fixes from Linus Walleij: "A first round of GPIO fixes for the v3.11 series: - OMAP device tree boot fix - Handle an error condition in the MSM driver The OMAP patches have been around since around the merge window, but since they first caused more breakage I let them boil in -next for a while. These should be fine now" * tag 'gpio-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: drivers: gpio: msm: Fix the error condition for reading ngpio gpio/omap: fix build error when OF_GPIO is not defined. gpio/omap: auto request GPIO as input if used as IRQ via DT gpio/omap: don't create an IRQ mapping for every GPIO on DT
2013-07-22Merge branch 'for-3.11/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block IO driver bits from Jens Axboe: "As I mentioned in the core block pull request, due to real life circumstances the driver pull request would be late. Now it looks like -rc2 late... On the plus side, apart form the rsxx update, these are all things that I could argue could go in later in the cycle as they are fixes and not features. So even though things are late, it's not ALL bad. The pull request contains: - Updates to bcache, all bug fixes, from Kent. - A pile of drbd bug fixes (no big features this time!). - xen blk front/back fixes. - rsxx driver updates, some of them deferred form 3.10. So should be well cooked by now" * 'for-3.11/drivers' of git://git.kernel.dk/linux-block: (63 commits) bcache: Allocation kthread fixes bcache: Fix GC_SECTORS_USED() calculation bcache: Journal replay fix bcache: Shutdown fix bcache: Fix a sysfs splat on shutdown bcache: Advertise that flushes are supported bcache: check for allocation failures bcache: Fix a dumb race bcache: Use standard utility code bcache: Update email address bcache: Delete fuzz tester bcache: Document shrinker reserve better bcache: FUA fixes drbd: Allow online change of al-stripes and al-stripe-size drbd: Constants should be UPPERCASE drbd: Ignore the exit code of a fence-peer handler if it returns too late drbd: Fix rcu_read_lock balance on error path drbd: fix error return code in drbd_init() drbd: Do not sleep inside rcu bcache: Refresh usage docs ...
2013-07-22sfc: Enable RX scatter for flows steered by RFSBen Hutchings
Received packets are only scattered if this is enabled in both the matching filter and the receiving queue. This was not being done for filters inserted for RFS, so any packet requiring more than a single descriptor was dropped. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-22sched_clock: Fix integer overflowBaruch Siach
The expression '(1 << 32)' happens to evaluate as 0 on ARM, but it evaluates as 1 on xtensa and x86_64. This zeros sched_clock_mask, and breaks sched_clock(). Set the type of 1 to 'unsigned long long' to get the value we need. Reported-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-07-22net: pch_gbe depends on x86Jiri Slaby
Since 4bb1667255a86360721291fe59991d033bbc2f2a (build some drivers only when compile-testing), PTP_1588_CLOCK_PCH depends on (X86 || COMPILE_TEST). But PCH_GBE selects PTP_1588_CLOCK_PCH without depending on x86. Fix this by adding the same dependency here. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: <fengguang.wu@intel.com> [intel's build test robot] Cc: "David S. Miller" <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: netdev@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: kbuild-all@01.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-22Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter fixes for your net tree, they are: * Fix potential NULL dereference in the socket match if revision 0 is used, from Eric Dumazet. * Fix missing expectation NAT initialization that results in dumping the NAT part via ctnetlink, thus leading to problems in expectation synchronization through conntrackd, from myself. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-22libata: make it clear that sata_inic162x is experimentalTejun Heo
sata_inic162x never reached a state where it's reliable enough for production use and data corruption is a relatively common occurrence. Make the driver generate warning about the issues and mark the Kconfig option as experimental. If the situation doesn't improve, we'd be better off making it depend on CONFIG_BROKEN. Let's wait for several cycles and see if the kernel message draws any attention. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Martin Braure de Calignon <braurede@free.fr> Reported-by: Ben Hutchings <ben@decadent.org.uk> Reported-by: risc4all@yahoo.com
2013-07-22pinctrl: pinctrl-single: fix compile warning when no CONFIG_PMJean-Francois Moine
This warning has been introduced by the commit 0f9bc4bcdf4f pinctrl: single: adopt pinctrl sleep mode management Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-22libata: replace strict_strtol() with kstrtol()Jingoo Han
The usage of strict_strtol() is not preferred, because strict_strtol() is obsolete. Thus, kstrtol() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-07-22brcmfmac: bail out of brcmf_txflowblock_if() for non-netdev interfaceArend van Spriel
To avoid ending up in a NULL-pointer access, the function brcmf_txflowblock_if() should only be called for interfaces that have a netdev associated with it. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22brcmfmac: decrement pending 8021x count upon tx failureArend van Spriel
If the transmit fails because there are no hanger slots or any other reason and the packet was an EAPOL packet the pending counter should be decreased although it was not transmitted so the driver does not end up in a dead-lock. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22ath: wil6210: Fix build errorLarry Finger
Building driver wil6210 in 3.10 and 3.11 kernels yields the following errors: CC [M] drivers/net/wireless/ath/wil6210/debugfs.o drivers/net/wireless/ath/wil6210/debugfs.c: In function 'wil_print_ring': drivers/net/wireless/ath/wil6210/debugfs.c:163:11: error: pointer targets in passing argument 5 of 'hex_dump_to_buffer' differ in signedness [-Werror=pointer-sign] false); ^ In file included from include/linux/kernel.h:13:0, from include/linux/cache.h:4, from include/linux/time.h:4, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/linux/printk.h:361:13: note: expected 'char *' but argument is of type 'unsigned char *' extern void hex_dump_to_buffer(const void *buf, size_t len, ^ drivers/net/wireless/ath/wil6210/debugfs.c: In function 'wil_txdesc_debugfs_show': drivers/net/wireless/ath/wil6210/debugfs.c:429:10: error: pointer targets in passing argument 5 of 'hex_dump_to_buffer' differ in signedness [-Werror=pointer-sign] sizeof(printbuf), false); ^ In file included from include/linux/kernel.h:13:0, from include/linux/cache.h:4, from include/linux/time.h:4, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/linux/printk.h:361:13: note: expected 'char *' but argument is of type 'unsigned char *' extern void hex_dump_to_buffer(const void *buf, size_t len, ^ cc1: all warnings being treated as errors make[5]: *** [drivers/net/wireless/ath/wil6210/debugfs.o] Error 1 make[4]: *** [drivers/net/wireless/ath/wil6210] Error 2 make[3]: *** [drivers/net/wireless/ath] Error 2 make[2]: *** [drivers/net/wireless] Error 2 make[1]: *** [drivers/net] Error 2 make: *** [drivers] Error 2 These errors are fixed by changing the type of the buffer from "unsigned char *" to "char *". Reported-by: Thomas Fjellstrom <thomas@fjellstrom.ca> Tested-by: Thomas Fjellstrom <thomas@fjellstrom.ca> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [3.10] Cc: Thomas Fjellstrom <thomas@fjellstrom.ca> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22cw1200: Fix OOPS in monitor modeSolomon Peachy
In monitor mode, priv->vif is NULL, but at one point in the receive path we blindly attempt to dereference it. Add a test to prevent this. Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22ath9k_htc: reboot firmware if it was loadedOleksij Rempel
Currently ath9k_htc will reboot firmware only if interface was ever started. Which lead to the problem in case where interface was never started but module need to be reloaded. This patch will partially fix bug "ath9k_htc: Target is unresponsive" https://github.com/qca/open-ath9k-htc-firmware/issues/1 Reproduction case: - plug adapter - make sure nothing will touch it. Stop Networkmanager or blacklist mac address of this adapter. - rmmod ath9k_htc; sleep 1; modprobe ath9k_htc Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Cc: <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22ath9k_htc: do some initial hardware configurationOleksij Rempel
Currently we configure harwdare and clock, only after interface start. In this case, if we reload module or reboot PC without configuring adapter, firmware will freeze. There is no software way to reset adpter. This patch add initial configuration and set it in disabled state, to avoid this freeze. Behaviour of this patch should be similar to: ifconfig wlan0 up; ifconfig wlan0 down. Bug: https://github.com/qca/open-ath9k-htc-firmware/issues/1 Tested-by: Bo Shi <cnshibo@gmail.com> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Cc: <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22mwifiex: fix IRQ enable/disableDaniel Drake
During tear down (e.g. mwifiex_sdio_remove during system suspend), mwifiex left IRQs enabled for a significant period of time when it was unable to handle them correctly. This caused interrupt storms and interfered with the bluetooth interface on the same SDIO card. Solve this by disabling interrupts at the point when they can no longer be handled correctly, which is at the start of mwifiex_remove_card(). For cleanliness, we now enable interrupts in the mwifiex_add_card() path, to be symmetrical with the disabling of interrupts. We also couple the registration of the sdio IRQ handler with the actual enable/disable of interrupts at the hardware level. I also removed a write to this register in mwifiex_init_sdio which seemed pointless and won't cause any ill effects now that we only register the SDIO IRQ handler when we are ready to accept interrupts. Includes some corrections from Amitkumar Karwar. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2013-07-22Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-07-22drm/radeon: fix combios tables on older cardsMark Kettenis
Noticed that my old Radeon 7500 hung after printing drm: GPU not posted. posting now... when it wasn't selected as the primary card the BIOS. Some digging revealed that it was hanging in combios_parse_mmio_table() while parsing the ASIC INIT 3 table. Looking at the BIOS ROM for the card, it becomes obvious that there is no ASIC INIT 3 table in the BIOS. The code is just processing random garbage. No surprise it hangs! Why do I say that there is no ASIC INIT 3 table is the BIOS? This table is found through the MISC INFO table. The MISC INFO table can be found at offset 0x5e in the COMBIOS header. But the header is smaller than that. The COMBIOS header starts at offset 0x126. The standard PCI Data Structure (the bit that starts with 'PCIR') lives at offset 0x180. That means that the COMBIOS header can not be larger than 0x5a bytes and therefore cannot contain a MISC INFO table. I looked at a dozen or so BIOS images, some my own, some downloaded from: <http://www.techpowerup.com/vgabios/index.php?manufacturer=ATI&page=1> It is fairly obvious that the size of the COMBIOS header can be found at offset 0x6 of the header. Not sure if it is a 16-bit number or just an 8-bit number, but that doesn't really matter since the tables seems to be always smaller than 256 bytes. So I think combios_get_table_offset() should check if the requested table is present. This can be done by checking the offset against the size of the header. See the diff below. The diff is against the WIP OpenBSD codebase that roughly corresponds to Linux 3.8.13 at this point. But I don't think this bit of the code changed much since then. For what it is worth: Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-07-22drm/radeon: improve dac adjust heuristics for legacy pdacAlex Deucher
Hopefully avoid more quirks in the future due to bogus vbios dac data. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-07-22drm/radeon: Another card with wrong primary dac adjOndrej Zary
Hello, got another card with "too bright" problem: Sapphire Radeon VE 7000 DDR (VGA+S-Video) lspci -vnn: 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited Sapphire Radeon VE 7000 DDR [174b:7c28] The patch below fixes the problem for this card. But I don't like the blacklist, couldn't some heuristic be used instead? The interesting thing is that the manufacturer is the same as the other card needing the same quirk. I wonder how many different types are broken this way. The "wrong" ps2_pdac_adj value that comes from BIOS on this card is 0x300. ==================== drm/radeon: Add primary dac adj quirk for Sapphire Radeon VE 7000 DDR Values from BIOS are wrong, causing too bright colors. Use default values instead. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-07-22drm/radeon: fix endian issues with DP handling (v3)Alex Deucher
The atom interpreter expects data in LE format, so swap the message buffer as apprioriate. v2: properly handle non-dw aligned byte counts. v3: properly handle remainder Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Dong He <hedonghust@gmail.com> Cc: stable@vger.kernel.org
2013-07-22drm/radeon/vm: only align the pt base to 32kAlex Deucher
fixes: https://bugs.freedesktop.org/show_bug.cgi?id=67016 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-07-22drm/radeon: wait for 3D idle before using CP DMAAlex Deucher
Make sure the 3D engine is idle before using CP DMA for bo copies. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Marek Olšák <maraeo@gmail.com>
2013-07-22pinctrl: sh-pfc: fix SDHI0 VccQ regulator on sh73a0 with DTGuennadi Liakhovetski
The PFC pinctrl driver on sh73a0 is also regiatering a VccQ regulator for SDHI0. However, its consumers list only included the platform-data based SDHI device name. When booted with DT SDHI0 couldn't enable VccQ and therefore was unusable. Fix this by adding a consumer with DT-based name. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-22of/irq: init struct resource to 0 in of_irq_to_resource()Sebastian Andrzej Siewior
It almost does not matter because most users use only the ->start member of the struct. However if this struct is passed to a platform device which is then added via platform_device_add() then the ->parent member is also used. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-07-22of/irq: Avoid calling list_first_entry() for empty listAxel Lin
list_first_entry() expects the list is not empty, we need to check if list is empty before calling list_first_entry(). Thus use list_first_entry_or_null() instead of list_first_entry(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-07-22of: add vendor prefixes for hisiliconZhangfei Gao
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-07-22of: add vendor prefix for Qualcomm Atheros, Inc.Gabor Juhos
This prefix will be used in various compatible properties for the devices from Qualcomm Atheros, Inc. Cc: Luis R. Rodriguez <rodrigue@qca.qualcomm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-07-22MAINTAINERS: Fix incorrect status tagGrant Likely
When I removed myself from the xilinx drivers I used the wrong tag. Fix it. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-07-22MAINTAINERS: Refactor device tree maintainershipGrant Likely
Device tree bindings require a lot more attention than they used to. We've got a group of volunteers willing to take over maintaining bindings. This patch adds them to the MAINTAINERS file. This group still needs to work out a process for maintainership and how they are going to work together. I recommend that they set up a shared tree on git.kernel.org that they each have commit access to similar to the tip tree or the arm-soc tree, but it is up to them. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Rob Herring <rob.herring@calxeda.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-22MAINTAINERS: Change device tree mailing listGrant Likely
New list on vger.kernel.org. The old list was a pain to moderate. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-07-22MAINTAINERS: Remove Grant LikelyGrant Likely
Unfortunately, I'm no longer to spend the time needed on maintainership. It is time for me to step aside and pass maintainership to other engineers. I'm not disappearing from Linux development, but it would be irresponsible for me to hold onto a job that I am unable to do. v2: Leave my name on devicetree core code maintainership. Rob NAKed that part of the patch. :) Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Linux Walleij <linus.walleij@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Rob Herring <rob.herring@calxeda.com>
2013-07-22USB: EHCI: Fix resume signalling on remote wakeupRoger Quadros
Set the ehci->resuming flag for the port we receive a remote wakeup on so that resume signalling can be completed. Without this, the root hub timer will not fire again to check if the resume was completed and there will be a never-ending wait on on the port. This effect is only observed if the HUB IRQ IN does not come after we have initiated the port resume. Signed-off-by: Roger Quadros <rogerq@ti.com> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-22USB: cp210x: add MMB and PI ZigBee USB Device SupportSami Rahman
Added support for MMB Networks and Planet Innovation Ingeni ZigBee USB devices using customized Silicon Labs' CP210x.c USB to UART bridge drivers with PIDs: 88A4, 88A5. Signed-off-by: Sami Rahman <sami.rahman@mmbresearch.com> Tested-by: Sami Rahman <sami.rahman@mmbresearch.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-22usb: cp210x support SEL C662 Vendor/DeviceBarry Grussling
This patch adds support for the Schweitzer Engineering Laboratories C662 USB cable based off the CP210x driver. Signed-off-by: Barry Grussling <barry@grussling.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-22USB: option: append Petatel NP10T device to GSM modems listDaniil Bolsun
This patch was tested on 3.10.1 kernel. Same models of Petatel NP10T modems have different device IDs. Unfortunately they have no additional revision information on a board which may treat them as different devices. Currently I've seen only two NP10T devices with various IDs. Possibly Petatel NP10T list will be appended upon devices with new IDs will appear. Signed-off-by: Daniil Bolsun <dan.bolsun@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-22USB: misc: Add Manhattan Hi-Speed USB DVI Converter to sisusbvgaJóhann B. Guðmundsson
Signed-off-by: Jóhann B. Guðmundsson <johannbg@fedoraproject.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-22USB: storage: Add MicroVault Flash Drive to unusual_devsRen Bigcren
The device report an error capacity when read_capacity_16(). Using read_capacity_10() can get the correct capacity. Signed-off-by: Ren Bigcren <bigcren.ren@sonymobile.com> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Oskar Andero <oskar.andero@sonymobile.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-22usb: serial: cp210x: Add USB ID for Netgear Switches embedded serial adapterLuiz Angelo Daros de Luca
This adds NetGear Managed Switch M4100 series, M5300 series, M7100 series USB ID (0846:0110) to the cp210x driver. Without this, the serial adapter is not recognized in Linux. Description was obtained from an Netgear Eng. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-22ARM: 7788/1: elf: fix lpae hwcap feature reporting in proc/cpuinfoTetsuyuki Kobayashi
Commit a469abd0f868 ("ARM: elf: add new hwcap for identifying atomic ldrd/strd instructions") added a new hwcap to identify LPAE on CPUs which support it. Whilst the hwcap data is correct, the string reported in /proc/cpuinfo actually matches on HWCAP_VFPD32, which was missing an entry in the string table. This patch fixes this problem by adding a "vfpd32" string at the correct offset, preventing us from falsely advertising LPAE on CPUs which do not support it. [will: added commit message] Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-22HID: hid-logitech-dj: querying_devices was never setNestor Lopez Casado
Set querying_devices flag to true when we start the enumeration process. This was missing from the original patch. It never produced undesirable effects as it is highly improbable to have a second enumeration triggered while a first one was still in progress. Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit (git 2.34.1) at 2025-09-13 23:06:10 +0000