summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-21wifi: iwlwifi: fw: send marker cmd before suspend cmdMiri Korenblit
This is needed to sync the times in the FW and driver logs Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.9c84322c41b5.Id13816b3ece103f88514a7523b22bb2b9dcc8ab7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: mvm: check the right csa_activeEmmanuel Grumbach
When the firmware says that the channel switch is happening, we check that we know about that switch by checking the csa_active bit. Until now, we checked the bss_conf from the vif instead of taking the bss_conf of the link. Fix that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.63f835a4f578.I0bb2a231e4da506b7c751dc23a428558f9ecfa75@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: pcie: add size assertionsJohannes Berg
Ensure that the TX command scratch fits into the buffer provided by the first TB. It does, of course, but add some build-time validations in case we touch this code. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.8f54f2990b92.If19a038dfd633d4601e3d44dd0ff678bc0a851e9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: pcie: refactor RB status size calculationJohannes Berg
We have three places doing this check, and even in slightly different ways (with/without an intermediate). Refactor that to a new small inline function. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.f3e87ddd5bce.Ifefba753043b68c394590a35bc6914a0f6497fd3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: nl80211/reg: add no-EHT regulatory flagJohannes Berg
This just propagates to the channel flags, like no-HE and similar other flags before it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.74ce2983aed8.Ifa343ba89c11760491daad5aee5a81209d5735a7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: cfg80211: Retrieve PSD information from RNR AP informationIlan Peer
Retrieve the Power Spectral Density (PSD) value from RNR AP information entry and store it so it could be used by the drivers. PSD value is explained in Section 9.4.2.170 of Draft P802.11Revme_D2.0. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.067ded2b8fc3.I9f407ab5800cbb07045a0537a513012960ced740@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: mac80211: fix CRC calculation for extended elemsJohannes Berg
For extended elements, we currently only calculate the CRC for some of them, but really we should do it also for the rest that we care about, such as EHT operation and multi- link. Also, while at it, it seems we should do it even if they aren't well-formed, so we notice if that changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.93235d5c8651.I6615cb3c1244bc9618066baa2bdad7982e9abd1f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: mac80211: avoid lockdep checking when removing deflinkBenjamin Berg
struct sta_info may be removed without holding sta_mtx if it has not yet been inserted. To support this, only assert that the lock is held for links other than the deflink. This fixes lockdep issues that may be triggered in error cases. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.cdd81377dea0.If5a6734b4b85608a2275a09b4f99b5564d82997f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: mac80211: always hold sdata lock in chanctx assign/unassignJohannes Berg
Due to all the multi-link handling, we now expose the fact that the sdata/vif is locked to drivers, e.g. when the driver uses ieee80211_set_monitor_channel(). This was true when a chanctx is added to or removed from a link, _except_ in monitor mode with the virtual sdata/vif. Change that, so that drivers can make that assumption. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.a5cf7534beda.I5b51664231abee27e02f222083df7ccf88722929@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: mac80211: store BSS param change count from assoc responseJohannes Berg
When receiving a multi-link association response, make sure to track the BSS parameter change count for each link, including the assoc link. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.1799c164e7e9.I8e2c1f5eec6eec3fab525ae2dead9f6f099a2427@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: mac80211: drop some unprotected action framesJohannes Berg
We should not receive/handle unicast protected dual or public action frames that aren't protected, so drop them - in the latter case of course only if MFP is used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.eb4461108129.I3c2223cf29d8a3586dfc74b2dda3f6fa2a4eea7c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: mac80211: move action length check upJohannes Berg
We'd like to add more checks to the function here for action frames, so move up the length check from the action processing. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.e799254e923f.I0a1de5f6bbdc1b2ef5efaa0ac80c7c3f39415538@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: mac80211: drop unprotected robust mgmt before 4-way-HSAlon Giladi
When MFP is used, drop unprotected robust management frames also before the 4-way handshake has been completed, i.e. no key has been installed yet. Signed-off-by: Alon Giladi <alon.giladi@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619183718.cfbefddccd0c.Ife369dbb61c87e311ce15739d5b2b4763bfdfbae@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21ALSA: hda/realtek: Add quirk for ASUS ROG GV601VLuke D. Jones
Adds the required quirk to enable the Cirrus amp and correct pins on the ASUS ROG GV601V series. While this works if the related _DSD properties are made available, these aren't included in the ACPI of these laptops (yet). Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20230621085715.5382-1-luke@ljones.dev Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-21kselftest/arm64: Log signal code and address for unexpected signalsMark Brown
If we get an unexpected signal during a signal test log a bit more data to aid diagnostics. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230620-arm64-selftest-log-wrong-signal-v1-1-3fe29bdaaf38@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-06-21Merge branch 'topic/midi20' into for-nextTakashi Iwai
This is a small patch set to change the UMP core for the upcoming gadget driver support. Basically exporting a couple of helper functions and adding a flag to suppress the internal UMP handling. No functional changes by those alone. Link: https://lore.kernel.org/r/20230621110241.4751-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-21ALSA: ump: Export snd_ump_receive_ump_val()Takashi Iwai
This is another preliminary patch for USB MIDI 2.0 gadget driver. Export the currently local snd_ump_receive_ump_val(). It can be used by the gadget driver for processing the UMP data. Link: https://lore.kernel.org/r/20230621110241.4751-4-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-21ALSA: ump: Add no_process_stream flagTakashi Iwai
This is another preliminary patch for USB MIDI 2.0 gadget driver. Add a new flag, no_process_stream, to snd_ump for suppressing the UMP Stream message handling in UMP core. Link: https://lore.kernel.org/r/20230621110241.4751-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-21ALSA: ump: Add helper to change MIDI protocolTakashi Iwai
This is a preliminary patch for MIDI 2.0 USB gadget driver. Export a new helper to allow changing the current MIDI protocol from the outside. Link: https://lore.kernel.org/r/20230621110241.4751-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-06-21wifi: p54: Add missing MODULE_FIRMWARE macroJuerg Haefliger
Add the missing MODULE_FIRMWARE macro for "3826.eeprom". Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616121917.1034761-1-juerg.haefliger@canonical.com
2023-06-21udf: Fix uninitialized array access for some pathnamesJan Kara
For filenames that begin with . and are between 2 and 5 characters long, UDF charset conversion code would read uninitialized memory in the output buffer. The only practical impact is that the name may be prepended a "unification hash" when it is not actually needed but still it is good to fix this. Reported-by: syzbot+cd311b1e43cc25f90d18@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/000000000000e2638a05fe9dc8f9@google.com Signed-off-by: Jan Kara <jack@suse.cz>
2023-06-21MAINTAINERS: ath11k: add wiki and bugreport pageKalle Valo
ath11k has a wiki and a separate page about reporting bugs, add those so hopefully people find them easier. Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230614144704.505553-3-kvalo@kernel.org
2023-06-21MAINTAINERS: ath9k: add git treeKalle Valo
ath9k patches go to my ath.git tree, document that. Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230614144704.505553-2-kvalo@kernel.org
2023-06-21MAINTAINERS: mt76: add git treeKalle Valo
Felix has a git tree for mt76 patches, document that. Signed-off-by: Kalle Valo <kvalo@kernel.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230614144704.505553-1-kvalo@kernel.org
2023-06-21wifi: rtw89: use struct to parse firmware headerPing-Ke Shih
A firmware contains basic header, sections and optional dynamic header. Define them by a struct, so it will be easier to understand the layout, and also simply access these elements. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616060601.28460-1-pkshih@realtek.com
2023-06-21wifi: rtw89: TX power stuffs replace confusing naming of _max with _numZong-Zhe Yang
Some old declarations about TX power stuffs were named with confusing `_max`. But, they mean "the number of". So we change them to be named with `_num`. (No logic is changed.) Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616060523.28396-1-pkshih@realtek.com
2023-06-21wifi: rtw89: 8851b: configure to force 1 TX power valuePing-Ke Shih
RTL8851B is a chip with only single RF path, and it must use 1 TX power value for transmission, so force 1 TX power value to prevent hardware logic gets wrong TX power values randomly in certain samples. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230615130442.18116-6-pkshih@realtek.com
2023-06-21wifi: rtw89: 8851b: rfk: update IQK to version 0x8Ping-Ke Shih
The main change is to adjust RX calibration groups from {0,1,2,3} to {0,2} in 5 GHz, so reduce elements from 4 to 2, and use index to iterate them. Meanwhile, always do RX narrowband calibration (ID_NBRXK) for each group. NCTL is used to assist IQK, so also update NCTL to 0x6 along with internal tag HALRF_029_00_103. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230615130442.18116-5-pkshih@realtek.com
2023-06-21wifi: rtw89: 8851b: rfk: add LCK trackPing-Ke Shih
LCK is short for LC Tank calibration. To keep RF performance, do this calibration if difference of thermal value is over a threshold. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230615130442.18116-4-pkshih@realtek.com
2023-06-21wifi: rtw89: 8851b: update TX power tables to R28Zong-Zhe Yang
Update 8851B TX power tables to RF version R28. TX power tables' changes: * TX power limit and TX power shape: update 5 GHz configurations for FCC and IC Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230615130442.18116-3-pkshih@realtek.com
2023-06-21wifi: rtw89: 8851b: update RF radio A parameters to R28Ping-Ke Shih
Update 8851b radio A parameters to R28 along with internal HALRF_029_00_103 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230615130442.18116-2-pkshih@realtek.com
2023-06-21wifi: rtw88: fix not entering PS mode after AP stopsPo-Hao Huang
Without this patch, firmware only track beacons for port 0 and since we will always start AP on port 0, this results in misbehavior of power saving mode on other ports after AP stops. The "default port" H2C command is used to notify which port should firmware track. Update the correct settings to firmware so power saving mode can work properly. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616125540.36877-7-pkshih@realtek.com
2023-06-21wifi: rtw88: refine register based H2C commandPo-Hao Huang
Since register based H2C commands don't need endian conversion. Introduce a new API that don't do conversion and send it directly. New caller are expected to encode with cpu order and gradually replace the old ones. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616125540.36877-6-pkshih@realtek.com
2023-06-21wifi: rtw88: Stop high queue during scanPo-Hao Huang
When traversing channel list, TX in high queue should be disabled along with beacon function, so packets won't be sent to incorrect channels. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616125540.36877-5-pkshih@realtek.com
2023-06-21wifi: rtw88: Skip high queue in hci_flushPo-Hao Huang
The flush period may not always intersect with DTIM and when that happens, an error log "timed out to flush pci TX ring[6]" is shown. Bypass this since hardware will do proper transmission on the next DTIM period for broadcast/multicast packets in high queue. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616125540.36877-4-pkshih@realtek.com
2023-06-21wifi: rtw88: Fix AP mode incorrect DTIM behaviorPo-Hao Huang
Broadcast and multicast packets in high queue should be transmitted all at once during DTIM. But without proper settings, hardware fails to recognize that there are multiple packets and fetches only one. Fix this by signaling hardware with more data bit set when there are packets in the high queue. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616125540.36877-3-pkshih@realtek.com
2023-06-21wifi: rtw88: use struct instead of macros to set TX descPo-Hao Huang
Remove macros that set TX descriptors. Use struct and le32_encode_bits() with mask definitions. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616125540.36877-2-pkshih@realtek.com
2023-06-21wifi: rtw88: process VO packets without workqueue to avoid PTK rekey failedChih-Kang Chang
In the wpa_supplicant rekey flow, it sends an EAPOL packet 4/4 through nl80211_tx_control_port() and triggers wake_tx_queue() in the driver. Then, it sends nl80211_new_key() to configure a new key in mac80211. However, in wake_tx_queue(), a workqueue is used to process the tx packet, which might cause the driver to process the EAPOL packet later than nl80211_new_key(). As a result, the EAPOL 4/4 packet is dropped by mac80211 due to the rekey configuration being finished. The EAPOL packets belongs to VO packets that need high priority. Therefore, we process VO packets directly without workqueue to ensure that packets can process immediately. VO is normally used by voice application that is low traffic load and low latency, that doesn't affect user experience. We test iperf with VO packets(iperf3 -P4 -u -b 10000M -S 0xdf) before after TX throughput 162M 162M ping RTT 3.8ms 3.7ms Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230616031713.16769-1-pkshih@realtek.com
2023-06-21wifi: rtw88: Fix action frame transmission fail before associationPo-Hao Huang
For combo chips, antennas were controlled by bluetooth only during power on. If WiFi wish to do transmission, notification to the coexistence module are required. Previously we only do this before authentication. To allow transmission before auth, such as management TX, now we start the initiation of coexistence earlier so antennas are shared between WiFi and bluetooth after set_channel(), and frames could then be sent. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230615114348.7193-1-pkshih@realtek.com
2023-06-21Merge tag 'v6.4-next-defconfig' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/defconfig - Enable mt6357 PMIC needed for mt8365 EVK - Enable device for power button on several PMICs * tag 'v6.4-next-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: defconfig: enable Mediatek PMIC key arm64: defconfig: enable MT6357 regulator Link: https://lore.kernel.org/r/92e336ca-bbbb-6d6c-297a-13deaae4138b@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-21Merge tag 'ti-k3-config-for-v6.5' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/defconfig TI K3 defconfig updates Enable AM62 Verdin board peripherals Enable UBIFS support for OSPI NOR/NAND Filesystem on K3 platforms * tag 'ti-k3-config-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: arm64: defconfig: Enable UBIFS arm64: defconfig: enable drivers for Verdin AM62 Link: https://lore.kernel.org/r/97a49740-32e7-f899-d153-743b5a57eba7@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-21Merge tag 'qcom-arm64-defconfig-for-6.5-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig More Qualcomm ARM64 defconfig updates for v6.5 This enables various clock drivers for QCM2290, SM6115 and SC8280XP. Furhter, the interconnect and the MSM power manageer (MPM) drivers are enabled to allow QCM2290 to boot. * tag 'qcom-arm64-defconfig-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: Build SM6115 display and GPU clock controller drivers arm64: defconfig: Build display clock controller driver for QCM2290 arm64: defconfig: Build interconnect driver for QCM2290 arm64: defconfig: Build Global Clock Controller driver for QCM2290 arm64: defconfig: Build MSM power manager driver arm64: defconfig: Enable sc828x0xp lpasscc clock controller Link: https://lore.kernel.org/r/20230615154119.1460952-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-21Merge tag 'qcom-arm64-defconfig-for-6.5' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig Qualcomm ARM64 defconfig updates for v6.5 Enable the FSA4480 driver to enable USB Type-C altmode on devices such as SM8350 and SM8450 HDK. Enable the IPQ6018 APSS clock and PLL controller for CPU scaling, and enable GPU clock river for SA8775P. * tag 'qcom-arm64-defconfig-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: Enable ipq6018 apss clock and PLL controller arm64: defconfig: enable FSA4480 driver as module arm64: defconfig: enable the SA8775P GPUCC driver Link: https://lore.kernel.org/r/20230610170955.2478831-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-21Merge tag 'imx-defconfig-6.5' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig i.MX defconfig changes for 6.5: - Remove KERNEL_LZO and FW_LOADER_USER_HELPER from imx_v6_v7_defconfig. - Enable i.MX8M video capture drivers and TI SN65DSI83 driver for arm64 defconfig. * tag 'imx-defconfig-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: Enable the TI SN65DSI83 driver ARM: imx_v6_v7_defconfig: Remove KERNEL_LZO config arm64: defconfig: Enable video capture drivers on imx8mm/imx8mn ARM: imx_v6_v7_defconfig: Remove firmware loader helper Link: https://lore.kernel.org/r/20230610072530.418847-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-21bpf: Force kprobe multi expected_attach_type for kprobe_multi linkJiri Olsa
We currently allow to create perf link for program with expected_attach_type == BPF_TRACE_KPROBE_MULTI. This will cause crash when we call helpers like get_attach_cookie or get_func_ip in such program, because it will call the kprobe_multi's version (current->bpf_ctx context setup) of those helpers while it expects perf_link's current->bpf_ctx context setup. Making sure that we use BPF_TRACE_KPROBE_MULTI expected_attach_type only for programs attaching through kprobe_multi link. Fixes: ca74823c6e16 ("bpf: Add cookie support to programs attached with kprobe multi link") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230618131414.75649-1-jolsa@kernel.org
2023-06-21bpf/btf: Accept function names that contain dotsFlorent Revest
When building a kernel with LLVM=1, LLVM_IAS=0 and CONFIG_KASAN=y, LLVM leaves DWARF tags for the "asan.module_ctor" & co symbols. In turn, pahole creates BTF_KIND_FUNC entries for these and this makes the BTF metadata validation fail because they contain a dot. In a dramatic turn of event, this BTF verification failure can cause the netfilter_bpf initialization to fail, causing netfilter_core to free the netfilter_helper hashmap and netfilter_ftp to trigger a use-after-free. The risk of u-a-f in netfilter will be addressed separately but the existence of "asan.module_ctor" debug info under some build conditions sounds like a good enough reason to accept functions that contain dots in BTF. Although using only LLVM=1 is the recommended way to compile clang-based kernels, users can certainly do LLVM=1, LLVM_IAS=0 as well and we still try to support that combination according to Nick. To clarify: - > v5.10 kernel, LLVM=1 (LLVM_IAS=0 is not the default) is recommended, but user can still have LLVM=1, LLVM_IAS=0 to trigger the issue - <= 5.10 kernel, LLVM=1 (LLVM_IAS=0 is the default) is recommended in which case GNU as will be used Fixes: 1dc92851849c ("bpf: kernel side support for BTF Var and DataSec") Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Cc: Yonghong Song <yhs@meta.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/bpf/20230615145607.3469985-1-revest@chromium.org
2023-06-21Revert "virtio-blk: support completion batching for the IRQ path"Michael S. Tsirkin
This reverts commit 07b679f70d73483930e8d3c293942416d9cd5c13. This change appears to have broken things... We now see applications hanging during disk accesses. e.g. multi-port virtio-blk device running in h/w (FPGA) Host running a simple 'fio' test. [global] thread=1 direct=1 ioengine=libaio norandommap=1 group_reporting=1 bs=4K rw=read iodepth=128 runtime=1 numjobs=4 time_based [job0] filename=/dev/vda [job1] filename=/dev/vdb [job2] filename=/dev/vdc ... [job15] filename=/dev/vdp i.e. 16 disks; 4 queues per disk; simple burst of 4KB reads This is repeatedly run in a loop. After a few, normally <10 seconds, fio hangs. With 64 queues (16 disks), failure occurs within a few seconds; with 8 queues (2 disks) it may take ~hour before hanging. Last message: fio-3.19 Starting 8 threads Jobs: 1 (f=1): [_(7),R(1)][68.3%][eta 03h:11m:06s] I think this means at the end of the run 1 queue was left incomplete. 'diskstats' (run while fio is hung) shows no outstanding transactions. e.g. $ cat /proc/diskstats ... 252 0 vda 1843140071 0 14745120568 712568645 0 0 0 0 0 3117947 712568645 0 0 0 0 0 0 252 16 vdb 1816291511 0 14530332088 704905623 0 0 0 0 0 3117711 704905623 0 0 0 0 0 0 ... Other stats (in the h/w, and added to the virtio-blk driver ([a]virtio_queue_rq(), [b]virtblk_handle_req(), [c]virtblk_request_done()) all agree, and show every request had a completion, and that virtblk_request_done() never gets called. e.g. PF= 0 vq=0 1 2 3 [a]request_count - 839416590 813148916 105586179 84988123 [b]completion1_count - 839416590 813148916 105586179 84988123 [c]completion2_count - 0 0 0 0 PF= 1 vq=0 1 2 3 [a]request_count - 823335887 812516140 104582672 75856549 [b]completion1_count - 823335887 812516140 104582672 75856549 [c]completion2_count - 0 0 0 0 i.e. the issue is after the virtio-blk driver. This change was introduced in kernel 6.3.0. I am seeing this using 6.3.3. If I run with an earlier kernel (5.15), it does not occur. If I make a simple patch to the 6.3.3 virtio-blk driver, to skip the blk_mq_add_to_batch()call, it does not fail. e.g. kernel 5.15 - this is OK virtio_blk.c,virtblk_done() [irq handler] if (likely(!blk_should_fake_timeout(req->q))) { blk_mq_complete_request(req); } kernel 6.3.3 - this fails virtio_blk.c,virtblk_handle_req() [irq handler] if (likely(!blk_should_fake_timeout(req->q))) { if (!blk_mq_complete_request_remote(req)) { if (!blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr), virtblk_complete_batch)) { virtblk_request_done(req); //this never gets called... so blk_mq_add_to_batch() must always succeed } } } If I do, kernel 6.3.3 - this is OK virtio_blk.c,virtblk_handle_req() [irq handler] if (likely(!blk_should_fake_timeout(req->q))) { if (!blk_mq_complete_request_remote(req)) { virtblk_request_done(req); //force this here... if (!blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr), virtblk_complete_batch)) { virtblk_request_done(req); //this never gets called... so blk_mq_add_to_batch() must always succeed } } } Perhaps you might like to fix/test/revert this change... Martin Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306090826.C1fZmdMe-lkp@intel.com/ Cc: Suwan Kim <suwan.kim027@gmail.com> Tested-by: edliaw@google.com Reported-by: "Roberts, Martin" <martin.roberts@intel.com> Message-Id: <336455b4f630f329380a8f53ee8cad3868764d5c.1686295549.git.mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-21ARM: dts: lan966x: kontron-d10: add PHY interruptsMichael Walle
With interrupt handling fixed in the MaxLinear PHY driver, see commit 97a89ed101bb ("net: phy: mxl-gpy: disable interrupts on GPY215 by default"), we can finally add the correct interrupt description to the device tree. Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230616-feature-d10-dt-cleanups-v1-3-50dd0452b8fe@kernel.org
2023-06-21ARM: dts: lan966x: kontron-d10: fix SPI CSMichael Walle
The pinctrl node was missing which change the pin mux to GPIO mode. Add it so we don't have to rely on the bootloader to set the correct mode. Fixes: 79d83b3a458e ("ARM: dts: lan966x: add basic Kontron KSwitch D10 support") Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230616-feature-d10-dt-cleanups-v1-2-50dd0452b8fe@kernel.org
2023-06-21ARM: dts: lan966x: kontron-d10: fix board resetMichael Walle
The pinctrl node was missing which change the pin mux to GPIO mode. Add it. Fixes: 79d83b3a458e ("ARM: dts: lan966x: add basic Kontron KSwitch D10 support") Signed-off-by: Michael Walle <mwalle@kernel.org> [claudiu.beznea: moved pinctrl-* bindings after compatible] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230616-feature-d10-dt-cleanups-v1-1-50dd0452b8fe@kernel.org
generated by cgit (git 2.34.1) at 2025-09-15 12:56:35 +0000