summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-04-15drm/radeon/kms: add connectors even if i2c failsAlex Deucher
Sometimes the i2c test in i2c_bit_add_bus fails if this happens we fail to register the i2c adapter and eventually fail to add the connector. If i2c fails, add the connector to the user can at least force it on. Note that some distros set i2c-algo-bit.bit_test to 1 by default which sometimes fails preventing the ddc i2c adapter from being added. The i2c adapter works even if the bit test fails, probably due to pre/post_xfer not getting called in the test_bit function. I have another patch to follow up on that. See: https://bugs.freedesktop.org/show_bug.cgi?id=36221 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-15drm/radeon/kms: fix bad shift in atom iio table parserAlex Deucher
Noticed by Patrick Lowry. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-14bna: fix memory leak during RX path cleanupRasesh Mody
The memory leak was caused by unintentional assignment of the Rx path destroy callback function pointer to NULL just after correct initialization. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-14bna: fix for clean fw re-initializationRasesh Mody
During a kernel crash, bna control path state machine and firmware do not get a notification and hence are not cleanly shutdown. The registers holding driver/IOC state information are not reset back to valid disabled/parking values. This causes subsequent driver initialization to hang during kdump kernel boot. This patch, during the initialization of first PCI function, resets corresponding register when unclean shutown is detect by reading chip registers. This will make sure that ioc/fw gets clean re-initialization. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-14Revert "USB: isp1760-hcd: move imask clear after pending work is done"Greg Kroah-Hartman
This reverts commit 5808544690300071f09eef9ab83a0fb1f60cf1cd. To quote Richard: I don't think this should be mainlined. It was a misunderstanding on my part. If you see all the other hdc drivers in the same location, they all do the same thing (i.e. clear the interrupt status first, then do the work) that "glitch" I think I saw was actually two back-to-back interrupts. Sebastian (the original author of isp1760) explained it to me a few days after my submission. sorry for the confusion Cc: Richard Retanubun <RichardRetanubun@ruggedcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-14Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-04-14xen/irq: The Xen hypervisor cleans up the PIRQs if the other domain forgot.Konrad Rzeszutek Wilk
And if the other domain forgot to clean up its PIRQs we don't need to fail the operation. Just take a note of it and continue on. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-04-14xen/irq: Export 'xen_pirq_from_irq' function.Konrad Rzeszutek Wilk
We need this to find the real Xen PIRQ value for a device that requests an MSI or MSI-X. In the past we used 'xen_gsi_from_irq' since that function would return an Xen PIRQ or GSI depending on the provided IRQ. Now that we have seperated that we need to use the correct function. [v2: Deal with rebase on stable/irq.cleanup] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-04-14xen/irq: Add support to check if IRQ line is shared with other domains.Konrad Rzeszutek Wilk
We do this via the PHYSDEVOP_irq_status_query support hypervisor call. We will get a positive value if another domain has binded its PIRQ to the specified GSI (IRQ line). [v2: Deal with v2.6.37-rc1 rebase fallout] [v3: Deal with stable/irq.cleanup fallout] [v4: xen_ignore_irq->xen_test_irq_shared] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-04-14xen/irq: Check if the PCI device is owned by a domain different than DOMID_SELF.Konrad Rzeszutek Wilk
We check if there is a domain owner for the PCI device. In case of failure (meaning no domain has registered for this device) we make DOMID_SELF the owner. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v2: deal with rebasing on v2.6.37-1] [v3: deal with rebasing on stable/irq.cleanup] [v4: deal with rebasing on stable/irq.ween_of_nr_irqs] [v5: deal with rebasing on v2.6.39-rc3] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
2011-04-14xen/pci: Add xen_[find|register|unregister]_device_domain_owner functions.Konrad Rzeszutek Wilk
When the Xen PCI backend is told to enable or disable MSI/MSI-X functions, the initial domain performs these operations. The initial domain needs to know which domain (guest) is going to use the PCI device so when it makes the appropiate hypercall to retrieve the MSI/MSI-X vector it will also assign the PCI device to the appropiate domain (guest). This boils down to us needing a mechanism to find, set and unset the domain id that will be using the device. [v2: EXPORT_SYMBOL -> EXPORT_SYMBOL_GPL.] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-04-14ALSA: emu10k1 - Fix "Music" controls to "Synth" controls in documentsRaymond Yau
Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-04-14ARM: 6879/1: fix personality test wrt usage of domain handlersNicolas Pitre
There are optional bits that may complement a personality ID. It is therefore wrong to simply test against the absolute current->personality value to determine the effective personality. The PER_LINUX_32BIT is itself just PER_LINUX with one of those optional bits set. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-14ARM: 6878/1: fix personality flag propagation across an execNicolas Pitre
Our SET_PERSONALITY() implementation was overwriting all existing personality flags, including ADDR_NO_RANDOMIZE, making them unavailable to processes being exec'd after a call to personality() in user space. This prevents the gdb test suite from running successfully. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-14ARM: 6877/1: the ADDR_NO_RANDOMIZE personality flag should be honored with ↵Nicolas Pitre
mmap() Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-14ARM: 6876/1: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORSStephen Boyd
This config option isn't actually used anywhere and can be safely removed. The last user was traps.c before commit 082f47a ([ARM] always allow dump_stack() to produce a backtrace, 2007-07-05). Reviewed-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-14usbnet: Fix up 'FLAG_POINTTOPOINT' and 'FLAG_MULTI_PACKET' overlaps.huajun li
USB tethering does not work anymore since 2.6.39-rc2, but it's okay in -rc1. The root cause is the new added mask code 'FLAG_POINTTOPOINT' overlaps 'FLAG_MULTI_PACKET' in include/linux/usb/usbnet.h, this causes logic issue in rx_process(). This patch cleans up the overlap. Reported-and-Tested-by: Gottfried Haider <gottfried.haider@gmail.com> Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-14sched: Remove need_migrate_task()Peter Zijlstra
Oleg noticed that need_migrate_task() doesn't need the ->on_cpu check now that ttwu() doesn't do remote enqueues for !->on_rq && ->on_cpu, so remove the helper and replace the single instance with a direct ->on_rq test. Suggested-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152729.556674812@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Move the second half of ttwu() to the remote cpuPeter Zijlstra
Now that we've removed the rq->lock requirement from the first part of ttwu() and can compute placement without holding any rq->lock, ensure we execute the second half of ttwu() on the actual cpu we want the task to run on. This avoids having to take rq->lock and doing the task enqueue remotely, saving lots on cacheline transfers. As measured using: http://oss.oracle.com/~mason/sembench.c $ for i in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor ; do echo performance > $i; done $ echo 4096 32000 64 128 > /proc/sys/kernel/sem $ ./sembench -t 2048 -w 1900 -o 0 unpatched: run time 30 seconds 647278 worker burns per second patched: run time 30 seconds 816715 worker burns per second Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152729.515897185@chello.nl
2011-04-14sched: Restructure ttwu() some morePeter Zijlstra
Factor our helper functions to make the inner workings of try_to_wake_up() more obvious, this also allows for adding remote queues. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152729.475848012@chello.nl
2011-04-14sched: Rename ttwu_post_activation() to ttwu_do_wakeup()Peter Zijlstra
The ttwu_post_activation() code does the core wakeup, it sets TASK_RUNNING and performs wakeup-preemption, so give is a more descriptive name. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152729.434609705@chello.nl
2011-04-14sched: Remove rq argument from ttwu_stat()Peter Zijlstra
In order to call ttwu_stat() without holding rq->lock we must remove its rq argument. Since we need to change rq stats, account to the local rq instead of the task rq, this is safe since we have IRQs disabled. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152729.394638826@chello.nl
2011-04-14sched: Remove rq->lock from the first half of ttwu()Peter Zijlstra
Currently ttwu() does two rq->lock acquisitions, once on the task's old rq, holding it over the p->state fiddling and load-balance pass. Then it drops the old rq->lock to acquire the new rq->lock. By having serialized ttwu(), p->sched_class, p->cpus_allowed with p->pi_lock, we can now drop the whole first rq->lock acquisition. The p->pi_lock serializing concurrent ttwu() calls protects p->state, which we will set to TASK_WAKING to bridge possible p->pi_lock to rq->lock gaps and serialize set_task_cpu() calls against task_rq_lock(). The p->pi_lock serialization of p->sched_class allows us to call scheduling class methods without holding the rq->lock, and the serialization of p->cpus_allowed allows us to do the load-balancing bits without races. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152729.354401150@chello.nl
2011-04-14sched: Drop rq->lock from sched_exec()Peter Zijlstra
Since we can now call select_task_rq() and set_task_cpu() with only p->pi_lock held, and sched_exec() load-balancing has always been optimistic, drop all rq->lock usage. Oleg also noted that need_migrate_task() will always be true for current, so don't bother calling that at all. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152729.314204889@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Drop rq->lock from first part of wake_up_new_task()Peter Zijlstra
Since p->pi_lock now protects all things needed to call select_task_rq() avoid the double remote rq->lock acquisition and rely on p->pi_lock. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152729.273362517@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Add p->pi_lock to task_rq_lock()Peter Zijlstra
In order to be able to call set_task_cpu() while either holding p->pi_lock or task_rq(p)->lock we need to hold both locks in order to stabilize task_rq(). This makes task_rq_lock() acquire both locks, and have __task_rq_lock() validate that p->pi_lock is held. This increases the locking overhead for most scheduler syscalls but allows reduction of rq->lock contention for some scheduler hot paths (ttwu). Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152729.232781355@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Also serialize ttwu_local() with p->pi_lockPeter Zijlstra
Since we now serialize ttwu() using p->pi_lock, we also need to serialize ttwu_local() using that, otherwise, once we drop the rq->lock from ttwu() it can race with ttwu_local(). Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152729.192366907@chello.nl
2011-04-14sched: Delay task_contributes_to_load()Peter Zijlstra
In prepratation of having to call task_contributes_to_load() without holding rq->lock, we need to store the result until we do and can update the rq accounting accordingly. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152729.151523907@chello.nl
2011-04-14sched: Deal with non-atomic min_vruntime reads on 32bitsPeter Zijlstra
In order to avoid reading partial updated min_vruntime values on 32bit implement a seqcount like solution. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152729.111378493@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Remove rq argument to sched_class::task_waking()Peter Zijlstra
In preparation of calling this without rq->lock held, remove the dependency on the rq argument. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152729.071474242@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Drop the rq argument to sched_class::select_task_rq()Peter Zijlstra
In preparation of calling select_task_rq() without rq->lock held, drop the dependency on the rq argument. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152729.031077745@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Serialize p->cpus_allowed and ttwu() using p->pi_lockPeter Zijlstra
Currently p->pi_lock already serializes p->sched_class, also put p->cpus_allowed and try_to_wake_up() under it, this prepares the way to do the first part of ttwu() without holding rq->lock. By having p->sched_class and p->cpus_allowed serialized by p->pi_lock, we prepare the way to call select_task_rq() without holding rq->lock. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152728.990364093@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Provide p->on_rqPeter Zijlstra
Provide a generic p->on_rq because the p->se.on_rq semantics are unfavourable for lockless wakeups but needed for sched_fair. In particular, p->on_rq is only cleared when we actually dequeue the task in schedule() and not on any random dequeue as done by things like __migrate_task() and __sched_setscheduler(). This also allows us to remove p->se usage from !sched_fair code. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152728.949545047@chello.nl
2011-04-14sched: Clean up ttwu() statsPeter Zijlstra
Collect all ttwu() stat code into a single function and ensure its always called for an actual wakeup (changing p->state to TASK_RUNNING). Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152728.908177058@chello.nl
2011-04-14sched: Change the ttwu() success detailsPeter Zijlstra
try_to_wake_up() would only return a success when it would have to place a task on a rq, change that to every time we change p->state to TASK_RUNNING, because that's the real measure of wakeups. This results in that success is always true for the tracepoints. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152728.866866929@chello.nl
2011-04-14sched: Move wq_worker_waking to the correct sitePeter Zijlstra
wq_worker_waking_up() needs to match wq_worker_sleeping(), since the latter is only called on deactivate, move the former near activate. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/n/top-t3m7n70n9frmv4pv2n5fwmov@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14mutex: Use p->on_cpu for the adaptive spinPeter Zijlstra
Since we now have p->on_cpu unconditionally available, use it to re-implement mutex_spin_on_owner. Requested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152728.826338173@chello.nl
2011-04-14sched: Always provide p->on_cpuPeter Zijlstra
Always provide p->on_cpu so that we can determine if its on a cpu without having to lock the rq. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152728.785452014@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Provide scheduler_ipi() callback in response to smp_send_reschedule()Peter Zijlstra
For future rework of try_to_wake_up() we'd like to push part of that function onto the CPU the task is actually going to run on. In order to do so we need a generic callback from the existing scheduler IPI. This patch introduces such a generic callback: scheduler_ipi() and implements it as a NOP. BenH notes: PowerPC might use this IPI on offline CPUs under rare conditions! Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152728.744338123@chello.nl
2011-04-14Merge branch 'linus' into sched/lockingIngo Molnar
Merge reason: Pick up this upstream commit: 6631e635c65d: block: don't flush plugged IO on forced preemtion scheduling As it modifies the scheduler and we'll queue up dependent patches. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14ARM: SAMSUNG: Fix warning 's3c_pm_show_resume_irqs' defined but not usedMaurus Cuelenaere
s3c_pm_show_resume_irqs() is used by some s3c_pm_arch_show_resume_irqs() implementations, which get included through mach/pm-core.h. Add __maybe_unused to silence warnings when it isn't used (e.g. on S3C64XX platforms). Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-04-14ARM: SAMSUNG: Fix build failure in PM CRC check codeAbhilash Kesavan
This patch fixes build error that occurs on enabling the Samsung specific PM CRC check code. Missed removing this reference of s3c_sleep_save_phys during move to generic cpu suspend/resume support. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-04-14ARM: S5P: Remove unused s3c_pm_check_resume_pinAbhilash Kesavan
The s3c_pm_check_resume_pin() is not being used and can be safely removed to fix the build warning. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-04-13xHCI: Implement AMD PLL quirkAndiry Xu
This patch disable the optional PM feature inside the Hudson3 platform under the following conditions: 1. If an isochronous device is connected to xHCI port and is active; 2. Optional PM feature that powers down the internal Bus PLL when the link is in low power state is enabled. The PM feature needs to be disabled to eliminate PLL startup delays when the link comes out of low power state. The performance of DMA data transfer could be impacted if system delay were encountered and in addition to the PLL start up delays. Disabling the PM would leave room for unpredictable system delays in order to guarantee uninterrupted data transfer to isochronous audio or video stream devices that require time sensitive information. If data in an audio/video stream was interrupted then erratic audio or video performance may be encountered. AMD PLL quirk is already implemented in OHCI/EHCI driver. After moving the quirk code to pci-quirks.c and export them, xHCI driver can call it directly without having the quirk implementation in itself. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-04-13xhci: Tell USB core both roothubs lost power.Sarah Sharp
On a resume, when the power is lost during hibernate, the USB core will call hub_reset_resume for the xHCI USB 2.0 roothub, but not for the USB 3.0 roothub: [ 164.748310] usb usb1: root hub lost power or was reset [ 164.748353] usb usb2: root hub lost power or was reset [ 164.748487] usb usb3: root hub lost power or was reset [ 164.748488] xhci_hcd 0000:01:00.0: Stop HCD ... [ 164.870039] hub 4-0:1.0: hub_resume ... [ 164.870054] hub 3-0:1.0: hub_reset_resume This causes issues later, because the USB core assumes the USB 3.0 hub attached to the USB 3.0 roothub is still active. It attempts to queue a control URB for the external hub, which fails because all the device slot contexts were released when the USB 3.0 roothub lost power: [ 164.980044] hub 4-1:1.0: hub_resume [ 164.980047] xhci_hcd 0000:01:00.0: Get port status returned 0x10101 [ 164.980049] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980053] hub 3-0:1.0: port 1: status 0101 change 0001 [ 164.980056] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980060] xhci_hcd 0000:01:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90008948440, 32'h202e1, 4'hf); [ 164.980062] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980066] xhci_hcd 0000:01:00.0: clear port connect change, actual port 0 status = 0x2e1 [ 164.980069] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980072] xhci_hcd 0000:01:00.0: get port status, actual port 1 status = 0x2a0 [ 164.980074] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980077] xhci_hcd 0000:01:00.0: Get port status returned 0x100 [ 164.980079] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980082] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980085] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980088] hub 4-1:1.0: port 4: status 0000 change 0000 [ 164.980091] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980094] hub 4-1:1.0: activate --> -22 [ 164.980113] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980117] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980119] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980123] hub 4-1:1.0: can't resume port 4, status -22 [ 164.980126] hub 4-1:1.0: port 4 status ffff.ffff after resume, -22 [ 164.980129] usb 4-1.4: can't resume, status -22 [ 164.980131] hub 4-1:1.0: logical disconnect on port 4 This causes issues when a USB 3.0 hard drive is attached to the external USB 3.0 hub when the system is hibernated: [ 6249.849653] sd 8:0:0:0: [sdb] Unhandled error code [ 6249.849659] sd 8:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 6249.849663] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 2a 08 00 00 02 00 [ 6249.849671] end_request: I/O error, dev sdb, sector 10760 Make sure to inform the USB core that *both* xHCI roothubs lost power. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-04-13usbcore: Bug fix: system can't suspend with USB3.0 device connected to ↵Andiry Xu
USB3.0 hub This patch clear PORT_POWER when suspend a USB3.0 device behind a USB3.0 external hub, so the system can suspend and resume. Note USB3.0 device may not work after system resume and this is a temporary workaround. The correct fix will be in future patches. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-04-13USB: Fix unplug of device with active streamsMatthew Wilcox
If I unplug a device while the UAS driver is loaded, I get an oops in usb_free_streams(). This is because usb_unbind_interface() calls usb_disable_interface() which calls usb_disable_endpoint() which sets ep_out and ep_in to NULL. Then the UAS driver calls usb_pipe_endpoint() which returns a NULL pointer and passes an array of NULL pointers to usb_free_streams(). I think the correct fix for this is to check for the NULL pointer in usb_free_streams() rather than making the driver check for this situation. My original patch for this checked for dev->state == USB_STATE_NOTATTACHED, but the call to usb_disable_interface() is conditional, so not all drivers would want this check. Note from Sarah Sharp: This patch does avoid a potential dereference, but the real fix (which will be implemented later) is to set the .soft_unbind flag in the usb_driver structure for the UAS driver, and all drivers that allocate streams. The driver should free any streams when it is unbound from the interface. This avoids leaking stream rings in the xHCI driver when usb_disable_interface() is called. This should be queued for stable trees back to 2.6.35. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
2011-04-13USB: xhci - also free streams when resetting devicesDmitry Torokhov
Currently, when resetting a device, xHCI driver disables all but one endpoints and frees their rings, but leaves alone any streams that might have been allocated. Later, when users try to free allocated streams, we oops in xhci_setup_no_streams_ep_input_ctx() because ep->ring is NULL. Let's free not only rings but also stream data as well, so that calling free_streams() on a device that was reset will be safe. This should be queued for stable trees back to 2.6.35. Reviewed-by: Micah Elizabeth Scott <micah@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
2011-04-13Blackfin: SMP: fix cache flush loopSonic Zhang
The recent commit (10774912647781) wasn't entirely correct. While it fixed some issues, it introduced others. So pull in the fixes from the public cache flush functions, and document why we need to call things directly ourselves. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-13Blackfin: time-ts: ack gptimer sooner to avoid missing short intsMike Frysinger
If the period of a gptimer is fairly low, we might miss an interrupt by acking it too late (we end up acking the new int as well). Reported-by: Isabelle Leonardi <i.leonardi@detracom.fr> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit (git 2.34.1) at 2025-10-02 17:02:10 +0000