| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A smallish collection of fixes for SPI, all driver specific, plus one
device ID addition for a new Intel part.
The ppc4xx isn't routinely covered by most of the automated testing so
there were some errors that were missed in some of the recent API
conversions, otherwise there's nothing super remarkable here"
* tag 'spi-fix-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi-mxs: Fix chipselect glitch
spi: intel-pci: Add support for Lunar Lake-M SPI serial flash
spi: omap2-mcspi: Revert FIFO support without DMA
spi: ppc4xx: Drop write-only variable
spi: ppc4xx: Fix fallout from rename in struct spi_bitbang
spi: ppc4xx: Fix fallout from include cleanup
spi: spi-ppc4xx: include missing platform_device.h
spi: imx: fix the burst length at DMA mode and CPU mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap test fixes from Mark Brown:
"Guenter runs a lot of KUnit tests so noticed that there were a couple
of the regmap tests, including the newly added noinc test, which could
show spurious failures due to the use of randomly generated test
values. These changes handle the randomly generated data properly"
* tag 'regmap-fix-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Ensure that changed bytes are actually different
regmap: kunit: fix raw noinc write test wrapping
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for 'MSC_SERIAL = 0' corner case handling in wacom driver (Jason
Gerecke)
- ACPI S3 suspend/resume fix for intel-ish-hid (Even Xu)
- race condition fix preventing Wacom driver from losing events shortly
after initialization (Jason Gerecke)
- fix preventing certain Logitech HID++ devices from spamming kernel
log (Oleksandr Natalenko)
* tag 'hid-for-linus-2024021501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: generic: Avoid reporting a serial of '0' to userspace
HID: Intel-ish-hid: Ishtp: Fix sensor reads after ACPI S3 suspend
HID: multitouch: Add required quirk for Synaptics 0xcddc device
HID: wacom: Do not register input devices until after hid_hw_start
HID: logitech-hidpp: Do not flood kernel log
|
|
The brute force iommu_flush_iotlb_all() was good enough for unmap, but
in some cases a map operation could require removing a table pte entry
to replace with a block entry. This also requires tlb invalidation.
Missing this was resulting an obscure iova fault on what should be a
valid buffer address.
Thanks to Robin Murphy for helping me understand the cause of the fault.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: stable@vger.kernel.org
Fixes: b145c6e65eb0 ("drm/msm: Add support to create a local pagetable")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/578117/
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.8
- Fabrics connection error handling (Chaitanya)
- Use relaxed effects to reduce unnecessary queue freezes (Keith)"
* tag 'nvme-6.8-2024-02-15' of git://git.infradead.org/nvme:
nvmet: remove superfluous initialization
nvme: implement support for relaxed effects
nvme-fabrics: fix I/O connect error handling
|
|
Fix trace_string() by assigning the string length to the return variable
which got lost in commit ddeea494a16f ("tracing/synthetic: Use union
instead of casts") and caused trace_string() to always return 0.
Link: https://lore.kernel.org/linux-trace-kernel/20240214220555.711598-1-thorsten.blum@toblux.com
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: ddeea494a16f ("tracing/synthetic: Use union instead of casts")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-02-06 (igb, igc)
This series contains updates to igb and igc drivers.
Kunwu Chan adjusts firmware version string implementation to resolve
possible NULL pointer issue for igb.
Sasha removes workaround on igc.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Remove temporary workaround
igb: Fix string truncation warnings in igb_set_fw_version
====================
Link: https://lore.kernel.org/r/20240214180347.3219650-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao says:
====================
Fix MODULE_DESCRIPTION() for net (p6)
There are a few network modules left that misses MODULE_DESCRIPTION(),
causing a warnning when compiling with W=1. Example:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/....
This last patchset solves the problem for all the missing driver. It is
not expect to see any warning for the driver/net and net/ directory once
all these patches have landed.
v1: https://lore.kernel.org/all/20240213112122.404045-1-leitao@debian.org/
====================
Link: https://lore.kernel.org/r/20240214152741.670178-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the ARC modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240214152741.670178-8-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the PHY MDIO helpers.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240214152741.670178-7-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the PPP modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240214152741.670178-6-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the SysKonnect FDDI PCI module.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240214152741.670178-5-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the PLIP (parallel port) network module
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240214152741.670178-4-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the IEEE 802.15.4 loopback driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240214152741.670178-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Xen backend network module.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20240214152741.670178-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The USB audio driver tries to retrieve MIDI jack name strings that can
be used for rawmidi substream names and sequencer port names, but its
checking is too strict: often the firmware provides the jack info for
unexpected directions, and then we miss the info although it's
present.
In this patch, the code to extract the jack info is changed to allow
both in and out directions in a single loop. That is, the former two
functions to obtain the descriptor pointers for jack in and out are
changed to a single function that returns iJack of the corresponding
jack ID, no matter which direction is used. It's a code
simplification at the same time as well as the fix.
Fixes: eb596e0fd13c ("ALSA: usb-audio: generate midi streaming substream names from jack names")
Link: https://lore.kernel.org/r/20240215153144.26047-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The HP mt645 G7 Thin Client uses an ALC236 codec and needs the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make the mute and
micmute LEDs work.
There are two variants of the USB-C PD chip on this device. Each uses
a different BIOS and board ID, hence the two entries.
Signed-off-by: Eniac Zhang <eniac-xw.zhang@hp.com>
Signed-off-by: Alexandru Gagniuc <alexandru.gagniuc@hp.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240215154922.778394-1-alexandru.gagniuc@hp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The units of "work done" in the RX path should be packets instead of
descriptors, as large packets can be spread over multiple descriptors.
Fixes: 1c59eb678cbd ("ravb: Fillup ravb_rx_gbeth() stub")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20240214151204.2976-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reports a memory leak in pppoe_sendmsg [1].
The problem is in the pppoe_recvmsg() function that handles errors
in the wrong order. For the skb_recv_datagram() function, check
the pointer to skb for NULL first, and then check the 'error' variable,
because the skb_recv_datagram() function can set 'error'
to -EAGAIN in a loop but return a correct pointer to socket buffer
after a number of attempts, though 'error' remains set to -EAGAIN.
skb_recv_datagram
__skb_recv_datagram // Loop. if (err == -EAGAIN) then
// go to the next loop iteration
__skb_try_recv_datagram // if (skb != NULL) then return 'skb'
// else if a signal is received then
// return -EAGAIN
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.
Link: https://syzkaller.appspot.com/bug?extid=6bdfd184eac7709e5cc9 [1]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+6bdfd184eac7709e5cc9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6bdfd184eac7709e5cc9
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/20240214085814.3894917-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of GSO, 'chunk->skb' pointer may point to an entry from
fraglist created in 'sctp_packet_gso_append()'. To avoid freeing
random fraglist entry (and so undefined behavior and/or memory
leak), introduce 'sctp_inq_chunk_free()' helper to ensure that
'chunk->skb' is set to 'chunk->head_skb' (i.e. fraglist head)
before calling 'sctp_chunk_free()', and use the aforementioned
helper in 'sctp_inq_pop()' as well.
Reported-by: syzbot+8bb053b5d63595ab47db@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=0d8351bbe54fd04a492c2daab0164138db008042
Fixes: 90017accff61 ("sctp: Add GSO support")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20240214082224.10168-1-dmantipov@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add basic support for the J722S EVM with UART console and
MMC SD as rootfs.
Schematics are available at:
https://www.ti.com/lit/zip/sprr495
Co-developed-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20240206100608.127702-4-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The J722S is a family of application processors built for Automotive and
Linux Application development. J722S family of SoCs is a superset of the
AM62P SoC family and shares similar memory map, thus the nodes are being
reused from AM62P includes instead of duplicating the definitions.
Some highlights of J722S SoC (in addition to AM62P SoC features) are:
* Two Cortex-R5F for Functional Safety or general-purpose usage and
two C7x floating point vector DSP with Matrix Multiply Accelerator
for deep learning.
* Vision Processing Accelerator (VPAC) with image signal processor
and Depth and Motion Processing Accelerator (DMPAC).
* 7xUARTs, 3xSPI, 5xI2C, 2xUSB2, 2xCAN-FD, 3xMMC and SD, GPMC for
NAND/FPGA connection, OSPI memory controller, 5xMcASP for audio,
4xCSI-RX for Camera, 1 PCIe Gen3 controller, USB3.0 eCAP/eQEP,
ePWM, among other peripherals.
For those interested, more details about this SoC can be found in the
Technical Reference Manual here:
https://www.ti.com/lit/zip/sprujb3
Co-developed-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Link: https://lore.kernel.org/r/20240206100608.127702-3-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Add bindings for TI J722S family of devices.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240206100608.127702-2-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Main differences between the new variant and Advanced PG2:
1. Arduino interface is removed. Instead, an new ASIC is added for
communicating with PLC 1200 signal modules.
2. USB 3.0 type A connector is removed, only USB 2.0 type A connector is
available.
3. DP interface is removed. Instead, to communicate with PLC 1200 signal
modules, a USB 3.0 type B connector is added but the signals are
actually not USB.
4. DDR size is increased to 4 GB.
5. Two sensors are added, one tilt sensor and one light sensor.
The light sensor it not yet added to the DT at this stage as it depends
on to-be-added bindings.
Co-developed-by: Chao Zeng <chao.zeng@siemens.com>
Signed-off-by: Chao Zeng <chao.zeng@siemens.com>
Co-developed-by: Li Hua Qian <huaqian.li@siemens.com>
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
[Jan: rebase over dtsi refactorings, split-out light sensor, improve LEDs]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/d24e920547986499f6e8e39c833e414679b12ab4.1707463401.git.jan.kiszka@siemens.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Add function and color properties and use the common scheme for the node
name. We can't change the user-visible labels, though, due to existing
userspace relying on the current format.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/331f8756483e3f896a3e50e069b3e2c0fae7a8ac.1707463401.git.jan.kiszka@siemens.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
There is a variant coming which does not support the Display Port. Move
all related bits into a separate dtsi so that only those variants
supporting the interface can include it.
Along that, remove a redundant clock setting from
k3-am65-iot2050-common-pg1.dtsi.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/3397d917d7c97f7aec05bc5f65eef3a6fe843650.1707463401.git.jan.kiszka@siemens.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Already simplifies the existing code by avoid the switch back in the m2
variant to what k3-am65-main.dtsi provided as base.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/51d9be5ddbf74f90bc915ab5473b9ea9a4b0cdf7.1707463401.git.jan.kiszka@siemens.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
A new variant is to be added which will not have a arduino connector
like the existing ones. Factor out all bits that are specific to this
connector.
The split is not perfect because wkup_gpio0 is defined based on what is
common to all variants having the connector, thus containing also
connector-unrelated information. But this is still cleaner than
replicating this node into all 4 variants.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/3366367dc9f190c9e21027b9a810886791e99245.1707463401.git.jan.kiszka@siemens.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The R5 lockstep disabling should be common for all PG2 boards, move it
from variants dts to common-pg2.dtsi.
As now the Basic PG2 consumes this twice, move Basic disabling to the
PG1 variant.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
[Jan: avoid duplication of disabling for Basic PG2]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/f692d0211915aefd4de7c9ecff5234683c9c7d59.1707463401.git.jan.kiszka@siemens.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
This new variant is derived from the Advanced PG2 board, removing the
Arduino interface, and adding a new ASIC for communicating with the
PLC 1200 signal modules.
Signed-off-by: Su Bao Cheng <baocheng.su@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/595d8d79647a0f5e6e635a22ee0fee011f8a5c5e.1707463401.git.jan.kiszka@siemens.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
AM62 USB works with some devices, while failing to operate with others.
[ 560.189822] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[ 560.195631] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 2
[ 574.388509] xhci-hcd xhci-hcd.4.auto: can't setup: -110
[ 574.393814] xhci-hcd xhci-hcd.4.auto: USB bus 2 deregistered
[ 574.399544] xhci-hcd: probe of xhci-hcd.4.auto failed with error -110
This seems to be related to LPM (Link Power Management), and disabling it
turns USB into reliable working state.
As per AM62 reference manual:
> 4.8.2.1 USB2SS Unsupported Features
>
> The following features are not supported on this family of devices:
> ...
> - USB 2.0 ECN: Link Power Management (LPM)
> ...
Fixes: 2240f96cf3cd ("arm64: dts: ti: k3-am62-main: Add support for USB")
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20240209130213.38908-1-andrejs.cainikovs@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Set VDD_CORE minimum voltage to 0.75V, TI AM62 can run at either 0.75V
or 0.85V depending on the actual speed grade and on the maximum
configured speed (1.4GHz frequency requires 0.85V).
The actual value is programmed into the PMIC EEPROM during manufacturing
(according to the SOC speed grade) and this ensure that both the voltage
values are valid and therefore the OS will not overwrite the value
programmed into the PMIC.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240213155622.18309-1-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The devices in the wkup domain are capable of waking up the system from
suspend. We can configure the wkup domain devices in a generic way using
the ti-sysc interconnect target module driver like we have done with the
earlier TI SoCs.
As ti-sysc manages the SYSCONFIG related registers independent of the
child hardware device, the wake-up configuration is also set even if
wkup_uart0 is reserved by sysfw.
The wkup_uart0 device has interconnect target module register mapping like
dra7 wkup uart. There is a 1 MB interconnect target range with one uart IP
block in the target module. The power domain and clock affects the whole
interconnect target module.
Note we change the functional clock name to follow the ti-sysc binding
and use "fck" instead of "fclk".
Also note that we need to disable the target module reset as noted by
Markus. Otherwise the sysfw using wkup_uart0 can get confused on some
devices leading to boot time issues such as mbox timeouts.
Tested-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240213112510.6334-1-tony@atomide.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The phyBOARD-Lyra has a GPIO fan header. This overlay enables the fan
header and sets the fan to turn on at 65C.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240213005248.1027842-1-nmorrisson@phytec.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The tps659413 and tps659411 nodes set WKUP_GPIO0_7 (G28) pin as input
to be used as PMIC interrupt but uses 9 (WKUP_GPIO0_9) as
"interrupts" property.
Replace 9 by 7 for both tps659413 and tps659411 after checking in the
board schematic [1].
[1] https://www.ti.com/tool/SK-TDA4VM
Fixes: b808cef0be46 ("arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs")
Cc: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://lore.kernel.org/r/20240209171146.307465-2-romain.naour@smile.fr
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
The tps659413 node set WKUP_GPIO0_83 (AA37) pin as input to be used as
PMIC interrupt but uses 39 (WKUP_GPIO0_39) as "interrupts" property.
Replace 39 by 83 after checking in the board schematic [1].
[1] https://www.ti.com/tool/SK-AM69
Fixes: 865a1593bf99 ("arm64: dts: ti: k3-am69-sk: Add support for TPS6594 PMIC")
Cc: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://lore.kernel.org/r/20240209171146.307465-1-romain.naour@smile.fr
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Add support for Verdin USB1 interface, implements role switch
functionality using "gpio-usb-b-connector", VBUS is also now
controlled with "regulator-fixed" using a standard GPIO.
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240209130106.38739-1-andrejs.cainikovs@gmail.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Add overlay for PCIe (uses the second instance of PCIe in AM654x) and
USB3.0 SERDES personality card
The PCIe3/USB3 card is provided with the AM65x GP EVM configuration [1]
so apply the overlay to k3-am654-gp-evm.dtb
[1] https://www.ti.com/lit/ug/spruim7/spruim7.pdf
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240208-for-v6-9-am65-overlays-2-0-v2-3-70bae3e91597@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.8
A relatively large set of fixes and quirk additions here but they're all
driver specific, people seem to be back into the swing of things after
the holidays. This is all driver specific and much of it fairly minor.
|
|
Enable both SERDES and PCIe DT nodes in order to get PCIe working on
the SERDES PCIe x2 personality card.
The daughter card also has a USB 2.0 dual-role port. As the base board
already supports a 2.0 dual-role port, enable the port on the SERDES
card to be a host only port.
This will prevent user confusion as having 2 ports in device mode often
leads to confusion as to which port is bound to the gadget function driver.
The PCIe x2 card is provided with the AM65x IDK configuration [1]
so apply the overlay to k3-am654-idk.dtb
[1] https://www.ti.com/lit/ug/spruim6a/spruim6a.pdf
Co-developed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20240208-for-v6-9-am65-overlays-2-0-v2-2-70bae3e91597@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
lld is now able to build ARMv4 and ARMv4T kernels, which means it can
generate thunks for those (__ARMv4PILongThunk_*, __ARMv4PILongBXThunk_*)
that can interfere with kallsyms table generation since they do not get
ignore like the corresponding ARMv5+ ones are:
Inconsistent kallsyms data
Try "make KALLSYMS_EXTRA_PASS=1" as a workaround
Replace the hardcoded list of thunk symbols with a more general regex that
covers this one along with future symbols that follow the same pattern.
Fixes: 5eb6e280432d ("ARM: 9289/1: Allow pre-ARMv5 builds with ld.lld 16.0.0 and newer")
Fixes: efe6e3068067 ("kallsyms: fix nonconverging kallsyms table with lld")
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The buffer_pg variable needs to hold an order-5 allocation (32 x
PAGE_SIZE) which, under memory pressure may fail to be allocated. Deal
with that error condition properly to avoid doing a NULL pointer
de-reference in the subsequent call to dma_map_page().
In addition, the err_reclaim_tx error label in bcmasp_netif_init() needs
to ensure that the TX NAPI object is properly deleted, otherwise
unregister_netdev() will spin forever attempting to test and clear
the NAPI_STATE_HASHED bit.
Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Link: https://lore.kernel.org/r/20240213173339.3438713-1-florian.fainelli@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Missing : in kdoc field in nft_set_pipapo.
2) Restore default DNAT behavior When a DNAT rule is configured via
iptables with different port ranges, from Kyle Swenson.
3) Restore flowtable hardware offload for bidirectional flows
by setting NF_FLOW_HW_BIDIRECTIONAL flag, from Felix Fietkau.
netfilter pull request 24-02-15
* tag 'nf-24-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix bidirectional offload regression
netfilter: nat: restore default DNAT behavior
netfilter: nft_set_pipapo: fix missing : in kdoc
====================
Link: https://lore.kernel.org/r/20240214233818.7946-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Doug Anderson observed that ChromeOS crashes are being reported which
include failing allocations of order 7 during core dumps due to ptrace
allocating storage for regsets:
chrome: page allocation failure: order:7,
mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO),
nodemask=(null),cpuset=urgent,mems_allowed=0
...
regset_get_alloc+0x1c/0x28
elf_core_dump+0x3d8/0xd8c
do_coredump+0xeb8/0x1378
with further investigation showing that this is:
[ 66.957385] DOUG: Allocating 279584 bytes
which is the maximum size of the SVE regset. As Doug observes it is not
entirely surprising that such a large allocation of contiguous memory might
fail on a long running system.
The SVE regset is currently sized to hold SVE registers with a VQ of
SVE_VQ_MAX which is 512, substantially more than the architectural maximum
of 16 which we might see even in a system emulating the limits of the
architecture. Since we don't expose the size we tell the regset core
externally let's define ARCH_SVE_VQ_MAX with the actual architectural
maximum and use that for the regset, we'll still overallocate most of the
time but much less so which will be helpful even if the core is fixed to
not require contiguous allocations.
Specify ARCH_SVE_VQ_MAX in terms of the maximum value that can be written
into ZCR_ELx.LEN (where this is set in the hardware). For consistency
update the maximum SME vector length to be specified in the same style
while we are at it.
We could also teach the ptrace core about runtime discoverable regset sizes
but that would be a more invasive change and this is being observed in
practical systems.
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240213-arm64-sve-ptrace-regset-size-v2-1-c7600ca74b9b@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the MIDR value of Microsoft Azure Cobalt 100, which is a Microsoft
implemented CPU based on r0p0 of the ARM Neoverse N2 CPU, and therefore
suffers from all the same errata.
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240214175522.2457857-1-eahariha@linux.microsoft.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-02-14
this is a pull request of 3 patches for net/master.
the first patch is by Ziqi Zhao and targets the CAN J1939 protocol, it
fixes a potential deadlock by replacing the spinlock by an rwlock.
Oleksij Rempel's patch adds a missing spin_lock_bh() to prevent a
potential Use-After-Free in the CAN J1939's
setsockopt(SO_J1939_FILTER).
Maxime Jayat contributes a patch to fix the transceiver delay
compensation (TDCO) calculation, which is needed for higher CAN-FD bit
rates (usually 2Mbit/s).
* tag 'linux-can-fixes-for-6.8-20240214' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: netlink: Fix TDCO calculation using the old data bittiming
can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
====================
Link: https://lore.kernel.org/r/20240214140348.2412776-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
properties
Use id-gpios and vbus-gpios instead.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240215093214.796821-3-alexander.stein@ew.tq-group.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
When SOF_TIMESTAMPING_OPT_ID is used to ambiguate timestamped datagrams,
the sk_tskey can become unpredictable in case of any error happened
during sendmsg(). Move increment later in the code and make decrement of
sk_tskey in error path. This solution is still racy in case of multiple
threads doing snedmsg() over the very same socket in parallel, but still
makes error path much more predictable.
Fixes: 09c2d251b707 ("net-timestamp: add key to disambiguate concurrent datagrams")
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240213110428.1681540-1-vadfed@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
clang-16 warns about a cast between incompatible function types:
drivers/gpu/drm/xe/xe_range_fence.c:155:10: error: cast from 'void (*)(const void *)' to 'void (*)(struct xe_range_fence *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
155 | .free = (void (*)(struct xe_range_fence *rfence)) kfree,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Avoid this with a trivial helper function that calls kfree() here.
v2:
- s/* rfence/*rfence/ (Thomas)
Fixes: 845f64bdbfc9 ("drm/xe: Introduce a range-fence utility")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213095719.454865-1-arnd@kernel.org
(cherry picked from commit f2c9364db57992b1496db4ae5e67ab14926be3ec)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Distinguish between xe_pt and the xe_pt_dir subclass when
allocating and freeing. Also use a fixed-size array for the
xe_pt_dir page entries to make life easier for dynamic range-
checkers. Finally rename the page-directory child pointer array
to "children".
While no functional change, this fixes ubsan splats similar to:
[ 51.463021] ------------[ cut here ]------------
[ 51.463022] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/xe/xe_pt.c:47:9
[ 51.463023] index 0 is out of range for type 'xe_ptw *[*]'
[ 51.463024] CPU: 5 PID: 2778 Comm: xe_vm Tainted: G U 6.8.0-rc1+ #218
[ 51.463026] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023
[ 51.463027] Call Trace:
[ 51.463028] <TASK>
[ 51.463029] dump_stack_lvl+0x47/0x60
[ 51.463030] __ubsan_handle_out_of_bounds+0x95/0xd0
[ 51.463032] xe_pt_destroy+0xa5/0x150 [xe]
[ 51.463088] __xe_pt_unbind_vma+0x36c/0x9b0 [xe]
[ 51.463144] xe_vm_unbind+0xd8/0x580 [xe]
[ 51.463204] ? drm_exec_prepare_obj+0x3f/0x60 [drm_exec]
[ 51.463208] __xe_vma_op_execute+0x5da/0x910 [xe]
[ 51.463268] ? __drm_gpuvm_sm_unmap+0x1cb/0x220 [drm_gpuvm]
[ 51.463272] ? radix_tree_node_alloc.constprop.0+0x89/0xc0
[ 51.463275] ? drm_gpuva_it_remove+0x1f3/0x2a0 [drm_gpuvm]
[ 51.463279] ? drm_gpuva_remove+0x2f/0xc0 [drm_gpuvm]
[ 51.463283] xe_vm_bind_ioctl+0x1a55/0x20b0 [xe]
[ 51.463344] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[ 51.463414] drm_ioctl_kernel+0xb6/0x120
[ 51.463416] drm_ioctl+0x287/0x4e0
[ 51.463418] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[ 51.463481] __x64_sys_ioctl+0x94/0xd0
[ 51.463484] do_syscall_64+0x86/0x170
[ 51.463486] ? syscall_exit_to_user_mode+0x7d/0x200
[ 51.463488] ? do_syscall_64+0x96/0x170
[ 51.463490] ? do_syscall_64+0x96/0x170
[ 51.463492] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 51.463494] RIP: 0033:0x7f246bfe817d
[ 51.463498] Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1a 48 8b 45 c8 64 48 2b 04 25 28 00 00 00
[ 51.463501] RSP: 002b:00007ffc1bd19ad0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 51.463502] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f246bfe817d
[ 51.463504] RDX: 00007ffc1bd19b60 RSI: 0000000040886445 RDI: 0000000000000003
[ 51.463505] RBP: 00007ffc1bd19b20 R08: 0000000000000000 R09: 0000000000000000
[ 51.463506] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffc1bd19b60
[ 51.463508] R13: 0000000040886445 R14: 0000000000000003 R15: 0000000000010000
[ 51.463510] </TASK>
[ 51.463517] ---[ end trace ]---
v2
- Fix kerneldoc warning (Matthew Brost)
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209112655.4872-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 157261c58b283f5c83e3f9087eca63be8d591ab8)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
