| Age | Commit message (Collapse) | Author |
|---|
|
The vfio-pci huge_fault handler doesn't make any attempt to insert a
mapping containing the faulting address, it only inserts mappings if the
faulting address and resulting pfn are aligned. This works in a lot of
cases, particularly in conjunction with QEMU where DMA mappings linearly
fault the mmap. However, there are configurations where we don't get
that linear faulting and pages are faulted on-demand.
The scenario reported in the bug below is such a case, where the physical
address width of the CPU is greater than that of the IOMMU, resulting in a
VM where guest firmware has mapped device MMIO beyond the address width of
the IOMMU. In this configuration, the MMIO is faulted on demand and
tracing indicates that occasionally the faults generate a VM_FAULT_OOM.
Given the use case, this results in a "error: kvm run failed Bad address",
killing the VM.
The host is not under memory pressure in this test, therefore it's
suspected that VM_FAULT_OOM is actually the result of a NULL return from
__pte_offset_map_lock() in the get_locked_pte() path from insert_pfn().
This suggests a potential race inserting a pte concurrent to a pmd, and
maybe indicates some deficiency in the mm layer properly handling such a
case.
Nevertheless, Peter noted the inconsistency of vfio-pci's huge_fault
handler where our mapping granularity depends on the alignment of the
faulting address relative to the order rather than aligning the faulting
address to the order to more consistently insert huge mappings. This
change not only uses the page tables more consistently and efficiently, but
as any fault to an aligned page results in the same mapping, the race
condition suspected in the VM_FAULT_OOM is avoided.
Reported-by: Adolfo <adolfotregosa@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220057
Fixes: 09dfc8a5f2ce ("vfio/pci: Fallback huge faults for unaligned pfn")
Cc: stable@vger.kernel.org
Tested-by: Adolfo <adolfotregosa@gmail.com>
Co-developed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20250502224035.3183451-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Call Trace:
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
strlen+0x93/0xa0 lib/string.c:420
__fortify_strlen include/linux/fortify-string.h:268 [inline]
get_kobj_path_length lib/kobject.c:118 [inline]
kobject_get_path+0x3f/0x2a0 lib/kobject.c:158
kobject_uevent_env+0x289/0x1870 lib/kobject_uevent.c:545
ib_register_device drivers/infiniband/core/device.c:1472 [inline]
ib_register_device+0x8cf/0xe00 drivers/infiniband/core/device.c:1393
rxe_register_device+0x275/0x320 drivers/infiniband/sw/rxe/rxe_verbs.c:1552
rxe_net_add+0x8e/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:550
rxe_newlink+0x70/0x190 drivers/infiniband/sw/rxe/rxe.c:225
nldev_newlink+0x3a3/0x680 drivers/infiniband/core/nldev.c:1796
rdma_nl_rcv_msg+0x387/0x6e0 drivers/infiniband/core/netlink.c:195
rdma_nl_rcv_skb.constprop.0.isra.0+0x2e5/0x450
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
____sys_sendmsg+0xa95/0xc70 net/socket.c:2566
___sys_sendmsg+0x134/0x1d0 net/socket.c:2620
__sys_sendmsg+0x16d/0x220 net/socket.c:2652
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This problem is similar to the problem that the
commit 1d6a9e7449e2 ("RDMA/core: Fix use-after-free when rename device name")
fixes.
The root cause is: the function ib_device_rename() renames the name with
lock. But in the function kobject_uevent(), this name is accessed without
lock protection at the same time.
The solution is to add the lock protection when this name is accessed in
the function kobject_uevent().
Fixes: 779e0bf47632 ("RDMA/core: Do not indicate device ready when device enablement fails")
Link: https://patch.msgid.link/r/20250506151008.75701-1-yanjun.zhu@linux.dev
Reported-by: syzbot+e2ce9e275ecc70a30b72@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e2ce9e275ecc70a30b72
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
set_high_memory() touches arch_zone_lowest_possible_pfn which is
marked as __initdata, which creates a section mismatch.
Since the only user of the function is free_area_init() which is also marked
as __init, mark set_high_memory() as __init as well.
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505060901.Qcs06UoB-lkp@intel.com/
Link: https://lore.kernel.org/r/20250506111012.108743-1-osalvador@suse.de
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
The nVHE hypervisor needs to have access to its own view of the FGT
masks, which unfortunately results in a bit of data duplication.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
... otherwise we can inherit the host configuration if this differs from
the KVM configuration.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[maz: simplified a couple of things]
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that we have computed RES0 bits, use them to sanitise the
guest view of FGT registers.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The current FTP tables are only concerned with the bits generating
ESR_ELx.EC==0x18. However, we want an exhaustive view of what KVM
really knows about.
So let's add another small table that provides that extra information.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In the process of decoupling KVM's view of the FGT bits from the
wider architectural state, use KVM's own FGT tables to build
a synthetic view of what is actually known.
This allows for some checking along the way.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We don't seem to be handling the GCS-specific exception class.
Handle it by delivering an UNDEF to the guest, and populate the
relevant trap bits.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Treating HCRX_EL2 as yet another FGT register seems excessive, and
gets in a way of further improvements. It is actually simpler to
just be explicit about the masking, so just to that.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We currently unconditionally make ACCDATA_EL1 accesses UNDEF.
As we are about to support it, restrict the UNDEF behaviour to cases
where FEAT_LS64_ACCDATA is not exposed to the guest.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We generally don't expect FEAT_LS64* instructions to trap, unless
they are trapped by a guest hypervisor.
Otherwise, this is just the guest playing tricks on us by using
an instruction that isn't advertised, which we handle with a well
deserved UNDEF.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
check_fgt_bit() and triage_sysreg_trap() implement the same thing
twice for no good reason. We have to lookup the FGT register twice,
as we don't communicate it. Similarly, we extract the register value
at the wrong spot.
Reorganise the code in a more logical way so that things are done
at the correct location, removing a lot of duplication.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
triage_sysreg_trap() assumes that it knows all the possible values
for FGT groups, which won't be the case as we start adding more
FGT registers (unless we add everything in one go, which is obviously
undesirable).
At the same time, it doesn't offer much in terms of debugging info
when things go wrong.
Turn the "__NR_FGT_GROUP_IDS__" case into a default, covering any
unhandled value, and give the kernel hacker a bit of a clue about
what's wrong (system register and full trap descriptor).
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As we will eventually have to context-switch the FEAT_FGT2 registers
in KVM (something that has been completely ignored so far), add
a new cap that we will be able to check for.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Provide the architected EC and ISS values for all the FEAT_LS64*
instructions.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Perform a bulk resync of tools/arch/arm64/include/asm/sysreg.h.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
A bunch of sysregs are now generated from the sysreg file, so no
need to carry separate definitions.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add the new CMOs trapped by HFGITR2_EL2.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Bulk addition of all the system registers trapped by HDFG{R,W}TR2_EL2.
The descriptions are extracted from the BSD-licenced JSON file part
of the 2025-03 drop from ARM.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Bulk addition of all the system registers trapped by HFG{R,W}TR2_EL2.
The descriptions are extracted from the BSD-licenced JSON file part
of the 2025-03 drop from ARM.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add the couple of fields introduced with FEAT_NV2p1.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add the missing MPAM field.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add the missing SME, ALTCLK, FPF, EFT. CRR and FDS fields.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add the missing RASv2 description.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Treating HFGRTR_EL2 and HFGWTR_EL2 identically was a mistake.
It makes things hard to reason about, has the potential to
introduce bugs by giving a meaning to bits that are really reserved,
and is in general a bad description of the architecture.
Given that #defines are cheap, let's describe both registers as
intended by the architecture, and repaint all the existing uses.
Yes, this is painful.
The registers themselves are generated from the JSON file in
an automated way.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add HCR_EL2 to the sysreg file, more or less directly generated
from the JSON file.
Since the generated names significantly differ from the existing
naming, express the old names in terms of the new one. One day, we'll
fix this mess, but I'm not in any hurry.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Resync the ID_AA64MMFR4_EL1 with the architectue description.
This results in:
- the new PoPS field
- the new NV2P1 value for the NV_frac field
- the new RMEGDI field
- the new SRMASK field
These fields have been generated from the reference JSON file.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The 2024 extensions are adding yet another variant of LS64
(aptly named FEAT_LS64WB) supporting LS64 accesses to write-back
memory, as well as 32 byte single-copy atomic accesses using pairs
of FP registers.
Add the relevant encoding to ID_AA64ISAR1_EL1.LS64.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- revert device path canonicalization, this does not work as intended
with namespaces and is not reliable in all setups
- fix crash in scrub when checksum tree is not valid, e.g. when mounted
with rescue=ignoredatacsums
- fix crash when tracepoint btrfs_prelim_ref_insert is enabled
- other minor fixups:
- open code folio_index(), meant to be used in MM code
- use matching type for sizeof in compression allocation
* tag 'for-6.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: open code folio_index() in btree_clear_folio_dirty_tag()
Revert "btrfs: canonicalize the device path before adding it"
btrfs: avoid NULL pointer dereference if no valid csum tree
btrfs: handle empty eb->folios in num_extent_folios()
btrfs: correct the order of prelim_ref arguments in btrfs__prelim_ref
btrfs: compression: adjust cb->compressed_folios allocation type
|
|
With the possibility of intra-mode BHI via cBPF, complete mitigation for
BHI is to use IBHF (history fence) instruction with BHI_DIS_S set. Since
this new instruction is only available in 64-bit mode, setting BHI_DIS_S in
32-bit mode is only a partial mitigation.
Do not set BHI_DIS_S in 32-bit mode so as to avoid reporting misleading
mitigated status. With this change IBHF won't be used in 32-bit mode, also
remove the CONFIG_X86_64 check from emit_spectre_bhb_barrier().
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
Classic BPF programs can be run by unprivileged users, allowing
unprivileged code to execute inside the kernel. Attackers can use this to
craft branch history in kernel mode that can influence the target of
indirect branches.
BHI_DIS_S provides user-kernel isolation of branch history, but cBPF can be
used to bypass this protection by crafting branch history in kernel mode.
To stop intra-mode attacks via cBPF programs, Intel created a new
instruction Indirect Branch History Fence (IBHF). IBHF prevents the
predicted targets of subsequent indirect branches from being influenced by
branch history prior to the IBHF. IBHF is only effective while BHI_DIS_S is
enabled.
Add the IBHF instruction to cBPF jitted code's exit path. Add the new fence
when the hardware mitigation is enabled (i.e., X86_FEATURE_CLEAR_BHB_HW is
set) or after the software sequence (X86_FEATURE_CLEAR_BHB_LOOP) is being
used in a virtual machine. Note that X86_FEATURE_CLEAR_BHB_HW and
X86_FEATURE_CLEAR_BHB_LOOP are mutually exclusive, so the JIT compiler will
only emit the new fence, not the SW sequence, when X86_FEATURE_CLEAR_BHB_HW
is set.
Hardware that enumerates BHI_NO basically has BHI_DIS_S protections always
enabled, regardless of the value of BHI_DIS_S. Since BHI_DIS_S doesn't
protect against intra-mode attacks, enumerate BHI bug on BHI_NO hardware as
well.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
Classic BPF programs have been identified as potential vectors for
intra-mode Branch Target Injection (BTI) attacks. Classic BPF programs can
be run by unprivileged users. They allow unprivileged code to execute
inside the kernel. Attackers can use unprivileged cBPF to craft branch
history in kernel mode that can influence the target of indirect branches.
Introduce a branch history buffer (BHB) clearing sequence during the JIT
compilation of classic BPF programs. The clearing sequence is the same as
is used in previous mitigations to protect syscalls. Since eBPF programs
already have their own mitigations in place, only insert the call on
classic programs that aren't run by privileged users.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- fix reading past the end of allocated memory
- fix missing dm_put_live_table() in dm_keyslot_evict()
* tag 'for-6.15/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix copying after src array boundaries
dm: add missing unlock on in dm_keyslot_evict()
|
|
Coverity noticed that the rc on smb2_parse_contexts() was not being checked
in the case of compounded operations. Since we don't want to stop parsing
the following compounded responses which are likely valid, we can't easily
error out here, but at least print a warning message if server has a bug
causing us to skip parsing the open response contexts.
Addresses-Coverity: 1639191
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
As reported by Sebastian Andrzej Siewior the use of local_bh_disable()
is only feasible in uni processor systems to update the modification rules.
The usual use-case to update the modification rules is to update the data
of the modifications but not the modification types (AND/OR/XOR/SET) or
the checksum functions itself.
To omit additional memory allocations to maintain fast modification
switching times, the modification description space is doubled at gw-job
creation time so that only the reference to the active modification
description is changed under rcu protection.
Rename cgw_job::mod to cf_mod and make it a RCU pointer. Allocate in
cgw_create_job() and free it together with cgw_job in
cgw_job_free_rcu(). Update all users to dereference cgw_job::cf_mod with
a RCU accessor and if possible once.
[bigeasy: Replace mod1/mod2 from the Oliver's original patch with dynamic
allocation, use RCU annotation and accessor]
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Closes: https://lore.kernel.org/linux-can/20231031112349.y0aLoBrz@linutronix.de/
Fixes: dd895d7f21b2 ("can: cangw: introduce optional uid to reference created routing jobs")
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250429070555.cs-7b_eZ@linutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Marc Kleine-Budde <mkl@pengutronix.de> says:
If a driver is removed, the driver framework invokes the driver's
remove callback. A CAN driver's remove function calls
unregister_candev(), which calls net_device_ops::ndo_stop further down
in the call stack for interfaces which are in the "up" state.
With the mcp251xfd driver the removal of the module causes the
following warning:
| WARNING: CPU: 0 PID: 352 at net/core/dev.c:7342 __netif_napi_del_locked+0xc8/0xd8
as can_rx_offload_del() deletes the NAPI, while it is still active,
because the interface is still up.
To fix the warning, first unregister the network interface, which
calls net_device_ops::ndo_stop, which disables the NAPI, and then call
can_rx_offload_del().
All other driver using the rx-offload helper have been checked and the
same issue has been found in the rockchip and m_can driver. These have
been fixed, but only compile time tested. On the mcp251xfd the fix was
tested on hardware.
Link: https://patch.msgid.link/20250502-can-rx-offload-del-v1-0-59a9b131589d@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
If a driver is removed, the driver framework invokes the driver's
remove callback. A CAN driver's remove function calls
unregister_candev(), which calls net_device_ops::ndo_stop further down
in the call stack for interfaces which are in the "up" state.
The removal of the module causes a warning, as can_rx_offload_del()
deletes the NAPI, while it is still active, because the interface is
still up.
To fix the warning, first unregister the network interface, which
calls net_device_ops::ndo_stop, which disables the NAPI, and then call
can_rx_offload_del().
Fixes: 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250502-can-rx-offload-del-v1-3-59a9b131589d@pengutronix.de
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
If a driver is removed, the driver framework invokes the driver's
remove callback. A CAN driver's remove function calls
unregister_candev(), which calls net_device_ops::ndo_stop further down
in the call stack for interfaces which are in the "up" state.
The removal of the module causes a warning, as can_rx_offload_del()
deletes the NAPI, while it is still active, because the interface is
still up.
To fix the warning, first unregister the network interface, which
calls net_device_ops::ndo_stop, which disables the NAPI, and then call
can_rx_offload_del().
Fixes: ff60bfbaf67f ("can: rockchip_canfd: add driver for Rockchip CAN-FD controller")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250502-can-rx-offload-del-v1-2-59a9b131589d@pengutronix.de
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In case of a ZONE APPEND write, regardless of native ZONE APPEND or the
emulation layer in the zone write plugging code, the sector the data got
written to by the device needs to be updated in the bio.
At the moment, this is done for every native ZONE APPEND write and every
request that is flagged with 'BIO_ZONE_WRITE_PLUGGING'. But thus
superfluously updates the sector for regular writes to a zoned block
device.
Check if a bio is a native ZONE APPEND write or if the bio is flagged as
'BIO_EMULATES_ZONE_APPEND', meaning the block layer's zone write plugging
code handles the ZONE APPEND and translates it into a regular write and
back. Only if one of these two criterion is met, update the sector in the
bio upon completion.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/dea089581cb6b777c1cd1500b38ac0b61df4b2d1.1746530748.git.jth@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If a driver is removed, the driver framework invokes the driver's
remove callback. A CAN driver's remove function calls
unregister_candev(), which calls net_device_ops::ndo_stop further down
in the call stack for interfaces which are in the "up" state.
With the mcp251xfd driver the removal of the module causes the
following warning:
| WARNING: CPU: 0 PID: 352 at net/core/dev.c:7342 __netif_napi_del_locked+0xc8/0xd8
as can_rx_offload_del() deletes the NAPI, while it is still active,
because the interface is still up.
To fix the warning, first unregister the network interface, which
calls net_device_ops::ndo_stop, which disables the NAPI, and then call
can_rx_offload_del().
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250502-can-rx-offload-del-v1-1-59a9b131589d@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The TDC is currently hardcoded enabled. This means that even for lower
CAN-FD data bitrates (with a DBRP (data bitrate prescaler) > 2) a TDC
is configured. This leads to a bus-off condition.
ISO 11898-1 section 11.3.3 says "Transmitter delay compensation" (TDC)
is only applicable if DBRP is 1 or 2.
To fix the problem, switch the driver to use the TDC calculation
provided by the CAN driver framework (which respects ISO 11898-1
section 11.3.3). This has the positive side effect that userspace can
control TDC as needed.
Demonstration of the feature in action:
| $ ip link set can0 up type can bitrate 125000 dbitrate 500000 fd on
| $ ip -details link show can0
| 3: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 72 qdisc pfifo_fast state UP mode DEFAULT group default qlen 10
| link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
| can <FD> state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 0
| bitrate 125000 sample-point 0.875
| tq 50 prop-seg 69 phase-seg1 70 phase-seg2 20 sjw 10 brp 2
| mcp251xfd: tseg1 2..256 tseg2 1..128 sjw 1..128 brp 1..256 brp_inc 1
| dbitrate 500000 dsample-point 0.875
| dtq 125 dprop-seg 6 dphase-seg1 7 dphase-seg2 2 dsjw 1 dbrp 5
| mcp251xfd: dtseg1 1..32 dtseg2 1..16 dsjw 1..16 dbrp 1..256 dbrp_inc 1
| tdcv 0..63 tdco 0..63
| clock 40000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 tso_max_size 65536 tso_max_segs 65535 gro_max_size 65536 parentbus spi parentdev spi0.0
| $ ip link set can0 up type can bitrate 1000000 dbitrate 4000000 fd on
| $ ip -details link show can0
| 3: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 72 qdisc pfifo_fast state UP mode DEFAULT group default qlen 10
| link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
| can <FD,TDC-AUTO> state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 0
| bitrate 1000000 sample-point 0.750
| tq 25 prop-seg 14 phase-seg1 15 phase-seg2 10 sjw 5 brp 1
| mcp251xfd: tseg1 2..256 tseg2 1..128 sjw 1..128 brp 1..256 brp_inc 1
| dbitrate 4000000 dsample-point 0.700
| dtq 25 dprop-seg 3 dphase-seg1 3 dphase-seg2 3 dsjw 1 dbrp 1
| tdco 7
| mcp251xfd: dtseg1 1..32 dtseg2 1..16 dsjw 1..16 dbrp 1..256 dbrp_inc 1
| tdcv 0..63 tdco 0..63
| clock 40000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 tso_max_size 65536 tso_max_segs 65535 gro_max_size 65536 parentbus spi parentdev spi0.0
There has been some confusion about the MCP2518FD using a relative or
absolute TDCO due to the datasheet specifying a range of [-64,63]. I
have a custom board with a 40 MHz clock and an estimated loop delay of
100 to 216 ns. During testing at a data bit rate of 4 Mbit/s I found
that using can_get_relative_tdco() resulted in bus-off errors. The
final TDCO value was 1 which corresponds to a 10% SSP in an absolute
configuration. This behavior is expected if the TDCO value is really
absolute and not relative. Using priv->can.tdc.tdco instead results in
a final TDCO of 8, setting the SSP at exactly 80%. This configuration
works.
The automatic, manual, and off TDC modes were tested at speeds up to,
and including, 8 Mbit/s on real hardware and behave as expected.
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Reported-by: Kelsey Maes <kelsey@vpprocess.com>
Closes: https://lore.kernel.org/all/C2121586-C87F-4B23-A933-845362C29CA1@vpprocess.com
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Kelsey Maes <kelsey@vpprocess.com>
Link: https://patch.msgid.link/20250430161501.79370-1-kelsey@vpprocess.com
[mkl: add comment]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The spin lock tx_handling_spinlock in struct m_can_classdev is not
being initialized. This leads the following spinlock bad magic
complaint from the kernel, eg. when trying to send CAN frames with
cansend from can-utils:
| BUG: spinlock bad magic on CPU#0, cansend/95
| lock: 0xff60000002ec1010, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
| CPU: 0 UID: 0 PID: 95 Comm: cansend Not tainted 6.15.0-rc3-00032-ga79be02bba5c #5 NONE
| Hardware name: MachineWare SIM-V (DT)
| Call Trace:
| [<ffffffff800133e0>] dump_backtrace+0x1c/0x24
| [<ffffffff800022f2>] show_stack+0x28/0x34
| [<ffffffff8000de3e>] dump_stack_lvl+0x4a/0x68
| [<ffffffff8000de70>] dump_stack+0x14/0x1c
| [<ffffffff80003134>] spin_dump+0x62/0x6e
| [<ffffffff800883ba>] do_raw_spin_lock+0xd0/0x142
| [<ffffffff807a6fcc>] _raw_spin_lock_irqsave+0x20/0x2c
| [<ffffffff80536dba>] m_can_start_xmit+0x90/0x34a
| [<ffffffff806148b0>] dev_hard_start_xmit+0xa6/0xee
| [<ffffffff8065b730>] sch_direct_xmit+0x114/0x292
| [<ffffffff80614e2a>] __dev_queue_xmit+0x3b0/0xaa8
| [<ffffffff8073b8fa>] can_send+0xc6/0x242
| [<ffffffff8073d1c0>] raw_sendmsg+0x1a8/0x36c
| [<ffffffff805ebf06>] sock_write_iter+0x9a/0xee
| [<ffffffff801d06ea>] vfs_write+0x184/0x3a6
| [<ffffffff801d0a88>] ksys_write+0xa0/0xc0
| [<ffffffff801d0abc>] __riscv_sys_write+0x14/0x1c
| [<ffffffff8079ebf8>] do_trap_ecall_u+0x168/0x212
| [<ffffffff807a830a>] handle_exception+0x146/0x152
Initializing the spin lock in m_can_class_allocate_dev solves that
problem.
Fixes: 1fa80e23c150 ("can: m_can: Introduce a tx_fifo_in_flight counter")
Signed-off-by: Antonios Salios <antonios@mwa.re>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250425111744.37604-2-antonios@mwa.re
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
A use-after-free is possible if one thread destroys the file
via __ksmbd_close_fd while another thread holds a reference to
it. The existing checks on fp->refcount are not sufficient to
prevent this.
The fix takes ft->lock around the section which removes the
file from the file table. This prevents two threads acquiring the
same file pointer via __close_file_table_ids, as well as the other
functions which retrieve a file from the IDR and which already use
this same lock.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Heelan <seanheelan@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ksmbd_vfs_stream_write() did not validate whether the write offset
(*pos) was within the bounds of the existing stream data length (v_len).
If *pos was greater than or equal to v_len, this could lead to an
out-of-bounds memory write.
This patch adds a check to ensure *pos is less than v_len before
proceeding. If the condition fails, -EINVAL is returned.
Cc: stable@vger.kernel.org
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The blammed commit copied to argv the size of the reallocated argv,
instead of the size of the old_argv, thus reading and copying from
past the old_argv allocated memory.
Following BUG_ON was hit:
[ 3.038929][ T1] kernel BUG at lib/string_helpers.c:1040!
[ 3.039147][ T1] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
...
[ 3.056489][ T1] Call trace:
[ 3.056591][ T1] __fortify_panic+0x10/0x18 (P)
[ 3.056773][ T1] dm_split_args+0x20c/0x210
[ 3.056942][ T1] dm_table_add_target+0x13c/0x360
[ 3.057132][ T1] table_load+0x110/0x3ac
[ 3.057292][ T1] dm_ctl_ioctl+0x424/0x56c
[ 3.057457][ T1] __arm64_sys_ioctl+0xa8/0xec
[ 3.057634][ T1] invoke_syscall+0x58/0x10c
[ 3.057804][ T1] el0_svc_common+0xa8/0xdc
[ 3.057970][ T1] do_el0_svc+0x1c/0x28
[ 3.058123][ T1] el0_svc+0x50/0xac
[ 3.058266][ T1] el0t_64_sync_handler+0x60/0xc4
[ 3.058452][ T1] el0t_64_sync+0x1b0/0x1b4
[ 3.058620][ T1] Code: f800865e a9bf7bfd 910003fd 941f48aa (d4210000)
[ 3.058897][ T1] ---[ end trace 0000000000000000 ]---
[ 3.059083][ T1] Kernel panic - not syncing: Oops - BUG: Fatal exception
Fix it by copying the size of src, and not the size of dst, as it was.
Fixes: 5a2a6c428190 ("dm: always update the array size in realloc_argv on success")
Cc: stable@vger.kernel.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Switch to panel timings based on datasheet for the AUO G101EVN01.0
LVDS panel. Default timings were tested on the panel.
Previous mode-based timings resulted in horizontal display shift.
Signed-off-by: Kevin Baker <kevinb@ventureresearch.com>
Fixes: 4fb86404a977 ("drm/panel: simple: Add AUO G101EVN010 panel support")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com
|
|
Remove redundant PSE reset.
When setting FE register there is no need to reset PSE,
doing so may cause FE to work abnormal.
Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/3a5223473e086a4b54a2b9a44df7d9ddcc2bc75a
Fixes: dee4dd10c79aa ("net: ethernet: mtk_eth_soc: ppe: add support for multiple PPEs")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://patch.msgid.link/18f0ac7d83f82defa3342c11ef0d1362f6b81e88.1746406763.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The purpose of resetting the TX queue is to reset the byte and packet
count as well as to clear the software flow control XOFF bit.
MediaTek developers pointed out that netdev_reset_queue would only
resets queue 0 of the network device.
Queues that are not reset may cause unexpected issues.
Packets may stop being sent after reset and "transmit timeout" log may
be displayed.
Import fix from MediaTek's SDK to resolve this issue.
Link: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/319c0d9905579a46dc448579f892f364f1f84818
Fixes: f63959c7eec31 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/c9ff9adceac4f152239a0f65c397f13547639175.1746406763.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
prevent wrong idmap generation
The PTE_MAYBE_NG macro sets the nG page table bit according to the value
of "arm64_use_ng_mappings". This variable is currently placed in the
.bss section. create_init_idmap() is called before the .bss section
initialisation which is done in early_map_kernel(). Therefore,
data/test_prot in create_init_idmap() could be set incorrectly through
the PAGE_KERNEL -> PROT_DEFAULT -> PTE_MAYBE_NG macros.
# llvm-objdump-21 --syms vmlinux-gcc | grep arm64_use_ng_mappings
ffff800082f242a8 g O .bss 0000000000000001 arm64_use_ng_mappings
The create_init_idmap() function disassembly compiled with llvm-21:
// create_init_idmap()
ffff80008255c058: d10103ff sub sp, sp, #0x40
ffff80008255c05c: a9017bfd stp x29, x30, [sp, #0x10]
ffff80008255c060: a90257f6 stp x22, x21, [sp, #0x20]
ffff80008255c064: a9034ff4 stp x20, x19, [sp, #0x30]
ffff80008255c068: 910043fd add x29, sp, #0x10
ffff80008255c06c: 90003fc8 adrp x8, 0xffff800082d54000
ffff80008255c070: d280e06a mov x10, #0x703 // =1795
ffff80008255c074: 91400409 add x9, x0, #0x1, lsl #12 // =0x1000
ffff80008255c078: 394a4108 ldrb w8, [x8, #0x290] ------------- (1)
ffff80008255c07c: f2e00d0a movk x10, #0x68, lsl #48
ffff80008255c080: f90007e9 str x9, [sp, #0x8]
ffff80008255c084: aa0103f3 mov x19, x1
ffff80008255c088: aa0003f4 mov x20, x0
ffff80008255c08c: 14000000 b 0xffff80008255c08c <__pi_create_init_idmap+0x34>
ffff80008255c090: aa082d56 orr x22, x10, x8, lsl #11 -------- (2)
Note (1) is loading the arm64_use_ng_mappings value in w8 and (2) is set
the text or data prot with the w8 value to set PTE_NG bit. If the .bss
section isn't initialized, x8 could include a garbage value and generate
an incorrect mapping.
Annotate arm64_use_ng_mappings as __read_mostly so that it is placed in
the .data section.
Fixes: 84b04d3e6bdb ("arm64: kernel: Create initial ID map from C code")
Cc: stable@vger.kernel.org # 6.9.x
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250502180412.3774883-1-yeoreum.yun@arm.com
[catalin.marinas@arm.com: use __read_mostly instead of __ro_after_init]
[catalin.marinas@arm.com: slight tweaking of the code comment]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
