| Age | Commit message (Collapse) | Author |
|---|
|
Add two new kernel command line parameters to limit the page-sizes
used for v1 page-tables:
nohugepages - Limits page-sizes to 4KiB
v2_pgsizes_only - Limits page-sizes to 4Kib/2Mib/1GiB; The
same as the sizes used with v2 page-tables
This is needed for multiple scenarios. When assigning devices to
SEV-SNP guests the IOMMU page-sizes need to match the sizes in the RMP
table, otherwise the device will not be able to access all shared
memory.
Also, some ATS devices do not work properly with arbitrary IO
page-sizes as supported by AMD-Vi, so limiting the sizes used by the
driver is a suitable workaround.
All-in-all, these parameters are only workarounds until the IOMMU core
and related APIs gather the ability to negotiate the page-sizes in a
better way.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240905072240.253313-1-joro@8bytes.org
|
|
The idxd PMU is system-wide scope, which is supported by the generic
perf_event subsystem now.
Set the scope for the idxd PMU and remove all the cpumask and hotplug
codes.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20240802151643.1691631-6-kan.liang@linux.intel.com
|
|
The iommu PMU is system-wide scope, which is supported by the generic
perf_event subsystem now.
Set the scope for the iommu PMU and remove all the cpumask and hotplug
codes.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240802151643.1691631-5-kan.liang@linux.intel.com
|
|
There are three cstate PMUs with different scopes, core, die and module.
The scopes are supported by the generic perf_event subsystem now.
Set the scope for each PMU and remove all the cpumask and hotplug codes.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240802151643.1691631-4-kan.liang@linux.intel.com
|
|
Usually, an event can be read from any CPU of the scope. It doesn't need
to be read from the advertised CPU.
Add a new event cap, PERF_EV_CAP_READ_SCOPE. An event of a PMU with
scope can be read from any active CPU in the scope.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240802151643.1691631-3-kan.liang@linux.intel.com
|
|
The perf subsystem assumes that the counters of a PMU are per-CPU. So
the user space tool reads a counter from each CPU in the system wide
mode. However, many PMUs don't have a per-CPU counter. The counter is
effective for a scope, e.g., a die or a socket. To address this, a
cpumask is exposed by the kernel driver to restrict to one CPU to stand
for a specific scope. In case the given CPU is removed,
the hotplug support has to be implemented for each such driver.
The codes to support the cpumask and hotplug are very similar.
- Expose a cpumask into sysfs
- Pickup another CPU in the same scope if the given CPU is removed.
- Invoke the perf_pmu_migrate_context() to migrate to a new CPU.
- In event init, always set the CPU in the cpumask to event->cpu
Similar duplicated codes are implemented for each such PMU driver. It
would be good to introduce a generic infrastructure to avoid such
duplication.
5 popular scopes are implemented here, core, die, cluster, pkg, and
the system-wide. The scope can be set when a PMU is registered. If so, a
"cpumask" is automatically exposed for the PMU.
The "cpumask" is from the perf_online_<scope>_mask, which is to track
the active CPU for each scope. They are set when the first CPU of the
scope is online via the generic perf hotplug support. When a
corresponding CPU is removed, the perf_online_<scope>_mask is updated
accordingly and the PMU will be moved to a new CPU from the same scope
if possible.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240802151643.1691631-2-kan.liang@linux.intel.com
|
|
Port req_cachep to struct kmem_cache_args.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Make __kmem_cache_create() a static inline function.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Make kmem_cache_create_usercopy() a static inline function.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Now that we have ported all users of kmem_cache_create_rcu() to struct
kmem_cache_args the function is unused and can be removed.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Port filp_cache to struct kmem_cache_args.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Use _Generic() to create a compatibility layer that type switches on the
third argument to either call __kmem_cache_create() or
__kmem_cache_create_args(). If NULL is passed for the struct
kmem_cache_args argument use default args making porting for callers
that don't care about additional arguments easy.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Make KMEM_CACHE_USERCOPY() use struct kmem_cache_args.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Make KMEM_CACHE() use struct kmem_cache_args.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Pass down struct kmem_cache_args to calculate_sizes() so we can use
args->{use}_freeptr_offset directly. This allows us to remove
->rcu_freeptr_offset from struct kmem_cache.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
and initialize most things in do_kmem_cache_create(). In a follow-up
patch we'll remove rcu_freeptr_offset from struct kmem_cache.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
do_kmem_cache_create() is the only caller and we're going to pass down
struct kmem_cache_args in a follow-up patch.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Pass struct kmem_cache_args to create_cache() so that we can later
simplify further helpers.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Port kmem_cache_create_usercopy() to struct kmem_cache_args and remove
the now unused do_kmem_cache_create_usercopy() helper.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Port kmem_cache_create_rcu() to struct kmem_cache_args.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Port kmem_cache_create() to struct kmem_cache_args.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Currently we have multiple kmem_cache_create*() variants that take up to
seven separate parameters with one of the functions having to grow an
eigth parameter in the future to handle both usercopy and a custom
freelist pointer.
Add a struct kmem_cache_args structure and move less common parameters
into it. Core parameters such as name, object size, and flags continue
to be passed separately.
Add a new function __kmem_cache_create_args() that takes a struct
kmem_cache_args pointer and port do_kmem_cache_create_usercopy() over to
it.
In follow-up patches we will port the other kmem_cache_create*()
variants over to it as well.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Free up reusing the double-underscore variant for follow-up patches.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs into slab/for-6.12/kmem_cache_args
Merge prerequisities from the vfs git tree for the following series that
introduces kmem_cache_args. The vfs.file branch includes the addition of
kmem_cache_create_rcu() which was needed in vfs for the filp cache
optimization. The following series refactors this code.
|
|
At the moment, the slab objects are charged to the memcg at the
allocation time. However there are cases where slab objects are
allocated at the time where the right target memcg to charge it to is
not known. One such case is the network sockets for the incoming
connection which are allocated in the softirq context.
Couple hundred thousand connections are very normal on large loaded
server and almost all of those sockets underlying those connections get
allocated in the softirq context and thus not charged to any memcg.
However later at the accept() time we know the right target memcg to
charge. Let's add new API to charge already allocated objects, so we can
have better accounting of the memory usage.
To measure the performance impact of this change, tcp_crr is used from
the neper [1] performance suite. Basically it is a network ping pong
test with new connection for each ping pong.
The server and the client are run inside 3 level of cgroup hierarchy
using the following commands:
Server:
$ tcp_crr -6
Client:
$ tcp_crr -6 -c -H ${server_ip}
If the client and server run on different machines with 50 GBPS NIC,
there is no visible impact of the change.
For the same machine experiment with v6.11-rc5 as base.
base (throughput) with-patch
tcp_crr 14545 (+- 80) 14463 (+- 56)
It seems like the performance impact is within the noise.
Link: https://github.com/google/neper [1]
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com> # net
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
iomap_file_buffered_write_punch_delalloc can only return errors if either
the ->punch callback returned an error, or if someone changed the API of
mapping_seek_hole_data to return a negative error code that is not
-ENXIO.
As the only instance of ->punch never returns an error, an such an error
would be fatal anyway remove the entire error propagation and don't
return an error code from iomap_file_buffered_write_punch_delalloc.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240910043949.3481298-6-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
XFS will need to look at the flags in the iomap structure, so pass it
down all the way to the callback.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240910043949.3481298-5-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
To fix short write error handling, We'll need to figure out what operation
iomap_file_buffered_write_punch_delalloc is called for. Pass the flags
argument on to it, and reorder the argument list to match that of
->iomap_end so that the compiler only has to add the new punch argument
to the end of it instead of reshuffling the registers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240910043949.3481298-4-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently iomap_unshare_iter relies on the IOMAP_F_SHARED flag to detect
blocks to unshare. This is reasonable, but IOMAP_F_SHARED is also useful
for the file system to do internal book keeping for out of place writes.
XFS used to that, until it got removed in commit 72a048c1056a
("xfs: only set IOMAP_F_SHARED when providing a srcmap to a write")
because unshare for incorrectly unshare such blocks.
Add an extra safeguard by checking the explicitly provided srcmap instead
of the fallback to the iomap for valid data, as that catches the case
where we'd just copy from the same place we'd write to easily, allowing
to reinstate setting IOMAP_F_SHARED for all XFS writes that go to the
COW fork.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240910043949.3481298-3-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When direct I/O completions invalidates the page cache it holds neither the
i_rwsem nor the invalidate_lock so it can be racing with
iomap_write_delalloc_release. If the search for the end of the region that
contains data returns the start offset we hit such a race and just need to
look for the end of the newly created hole instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240910043949.3481298-2-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240902080419.3824706-1-nichen@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240902081051.3824822-1-nichen@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add Watchdog Timer driver for RZ/V2H(P) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240829193831.80768-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add support for the Watchdog Timer (WDT) hardware found in the Renesas
RZ/V2H(P) SoC to the `renesas,wdt` device tree bindings.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240829193831.80768-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Firmware (SC) WDT can be already enabled in U-Boot. Detect this case and
make CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED functional by setting
WDOG_HW_RUNNING.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240828060212.108608-1-alexander.sverdlin@siemens.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Use the DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use __maybe_unused notation.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240809020822.335682-1-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Parts of the suspend and resume chain is left unprotected if we disable
the WDT here.
>From experiments we can see that the SCU disables and re-enables the WDT
when we enter and leave suspend to ram. By not touching the WDT here we
are protected by the WDT all the way to the SCU.
Signed-off-by: Jonas Blixt <jonas.blixt@actia.se>
CC: Anson Huang <anson.huang@nxp.com>
Fixes: 986857acbc9a ("watchdog: imx_sc: Add i.MX system controller watchdog support")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240801121845.1465765-1-jonas.blixt@actia.se
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Move post_rcs_wait into struct imx_wdt_hw_feature to simple code logic for
difference compatible string.
i.MX93 watchdog needn't wait 2.5 clocks after RCS is done. So needn't set
post_rcs_wait.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240730145610.2177627-1-Frank.Li@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Daniel Machon says:
====================
net: lan966x: use the newly introduced FDMA library
This patch series is the second of a 2-part series [1], that adds a new
common FDMA library for Microchip switch chips Sparx5 and lan966x. These
chips share the same FDMA engine, and as such will benefit from a common
library with a common implementation. This also has the benefit of
removing a lot of open-coded bookkeeping and duplicate code for the two
drivers.
In this second series, the FDMA library will be taken into use by the
lan966x switch driver.
###################
# Example of use: #
###################
- Initialize the rx and tx fdma structs with values for: number of
DCB's, number of DB's, channel ID, DB size (data buffer size), and
total size of the requested memory. Also provide two callbacks:
nextptr_cb() and dataptr_cb() for getting the nextptr and dataptr.
- Allocate memory using fdma_alloc_phys() or fdma_alloc_coherent().
- Initialize the DCB's with fdma_dcb_init().
- Add new DCB's with fdma_dcb_add().
- Free memory with fdma_free_phys() or fdma_free_coherent().
#####################
# Patch breakdown: #
#####################
Patch #1: select FDMA library for lan966x.
Patch #2: includes the fdma_api.h header and removes old symbols.
Patch #3: replaces old rx and tx variables with equivalent ones from the
fdma struct. Only the variables that can be changed without
breaking traffic is changed in this patch.
Patch #4: uses the library for allocation of rx buffers. This requires
quite a bit of refactoring in this single patch.
Patch #5: uses the library for adding DCB's in the rx path.
Patch #6: uses the library for freeing rx buffers.
Patch #7: uses the library for allocation of tx buffers. This requires
quite a bit of refactoring in this single patch.
Patch #8: uses the library for adding DCB's in the tx path.
Patch #9: uses the library helpers in the tx path.
Patch #10: ditch last_in_use variable and use library instead.
Patch #11: uses library helpers throughout.
Patch #12: refactor lan966x_fdma_reload() function.
[1] https://lore.kernel.org/netdev/20240902-fdma-sparx5-v1-0-1e7d5e5a9f34@microchip.com/
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
====================
Link: https://patch.msgid.link/20240905-fdma-lan966x-v1-0-e083f8620165@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now that we store everything in the fdma structs, refactor
lan966x_fdma_reload() to store and restore the entire struct.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The library provides helpers for a number of DCB and DB operations. Use
these throughout the code and remove the old ones.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This variable is used in the tx path to determine the last used DCB. The
library has the variable last_dcb for the exact same purpose. Ditch the
last_in_use variable throughout.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The library has the helper fdma_free_phys() for freeing physical FDMA
memory. Use it in the exit path.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the fdma_dcb_add() function to add DCB's in the tx path. This gets
rid of the open-coding of nextptr and dataptr handling and leaves it to
the library.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the two functions: fdma_alloc_phys() and fdma_dcb_init() for rx
buffer allocation and use the new buffers throughout.
In order to replace the old buffers with the new ones, we have to do the
following refactoring:
- use fdma_alloc_phys() and fdma_dcb_init()
- replace the variables: tx->dma, tx->dcbs and tx->curr_entry
with the equivalents from the FDMA struct.
- add lan966x_fdma_tx_dataptr_cb callback for obtaining the dataptr.
- Initialize FDMA struct values.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The library has the helper fdma_free_phys() for freeing physical FDMA
memory. Use it in the exit path.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the fdma_dcb_add() function to add DCB's in the rx path. This gets
rid of the open-coding of nextptr and dataptr handling and the functions
for adding DCB's.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the two functions: fdma_alloc_phys() and fdma_dcb_init() for rx
buffer allocation and use the new buffers throughout.
In order to replace the old buffers with the new ones, we have to do the
following refactoring:
- use fdma_alloc_phys() and fdma_dcb_init()
- replace the variables: rx->dma, rx->dcbs and rx->last_entry
with the equivalents from the FDMA struct.
- make use of fdma->db_size for rx buffer size.
- add lan966x_fdma_rx_dataptr_cb callback for obtaining the dataptr.
- Initialize FDMA struct values.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace the old rx and tx variables: channel_id, FDMA_DCB_MAX,
FDMA_RX_DCB_MAX_DBS, FDMA_TX_DCB_MAX_DBS, dcb_index and db_index with
the equivalents from the FDMA rx and tx structs. These variables are not
entangled in any buffer allocation and can therefore be replaced in
advance.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Include and use the new FDMA header, which now provides the required
masks and bit offsets for operating on the DCB's and DB's.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
