| Age | Commit message (Collapse) | Author |
|---|
|
The ->ready() callback is going away and since we don't do any important
stuff in sh_cpufreq_cpu_ready(), remove it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ready() callback was implemented earlier for acpi-cpufreq driver as
we wanted to use policy->cpuinfo.max_freq for which the policy was
required to be verified.
That is no longer the case and we can do the pr_warn() right from
->init() callback now. Remove acpi_cpufreq_cpu_ready().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On some systems, in order to get to the deepest low-power state of
the platform (which may be necessary to save significant enough
amounts of energy while suspended to idle. for example), devices on
the PCI bus exposed by the VMD driver need to be power-managed via
ACPI. However, the layout of the ACPI namespace below the VMD
controller device object does not reflect the layout of the PCI bus
under the VMD host bridge, so in order to identify the ACPI companion
objects for the devices on that bus, it is necessary to use a special
_ADR encoding on the ACPI side. In other words, acpi_pci_find_companion()
does not work for these devices, so it needs to be amended with a
special lookup logic specific to the VMD bus.
Address this issue by allowing the VMD driver to temporarily install
an ACPI companion lookup hook containing the code matching the devices
on the VMD PCI bus with the corresponding objects in the ACPI
namespace.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jon Derrick <jonathan.derrick@intel.com>
|
|
Due to a rebase damage, we lost the rtnl_lock() when the patch was
sent out. This causes an RTNL imbalance and failed assertions, due to
missing RTNL protection, for instance:
RTNL: assertion failed at net/wireless/reg.c (4025)
WARNING: CPU: 60 PID: 1720 at net/wireless/reg.c:4025 regulatory_set_wiphy_regd_sync+0x7f/0x90 [cfg80211]
Call Trace:
iwl_mvm_init_mcc+0x170/0x190 [iwlmvm]
iwl_op_mode_mvm_start+0x824/0xa60 [iwlmvm]
iwl_opmode_register+0xd0/0x130 [iwlwifi]
init_module+0x23/0x1000 [iwlmvm]
Fix this by adding the missing rtnl_lock() back to the code.
Fixes: eb09ae93dabf ("iwlwifi: mvm: load regdomain at INIT stage")
Link: https://lore.kernel.org/lkml/CAHk-=wjB_zBwZ+WR9LOpvgjvaQn=cqryoKigod8QnZs=iYGEhA@mail.gmail.com/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Usually in file system init() messages are only displayed in info level.
Change level from notice to info, but keep CONFIG_NTFS3_64BIT_CLUSTER in
notice level. Also this need even more attention so let's put big
warning here so that nobody will not try accidentally use it.
There is also no good reason to display internal stuff like binary tree
search. This is always on option which can only disabled for debugging
purposes by developer. Also this message does not even check if
developer has disabled it or not so it is useless info.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Files already have SDPX identifier so no reason to keep boilerplates in
these files anymore.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
This check will be also performed in generic_file_read_iter() so we do
not want to check this two times in a row.
This was founded with Smatch
fs/ntfs3/file.c:803 ntfs_file_read_iter()
warn: unused return: count = iov_iter_count()
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Use fiemap_prep() to check valid flags. It also shrink request scope
(@len) to what the fs can actually handle.
This address following Smatch static checker warning:
fs/ntfs3/frecord.c:1894 ni_fiemap()
warn: potential integer overflow from user 'vbo + len'
Because fiemap_prep() shrinks @len this cannot happened anymore.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: lore.kernel.org/ntfs3/20210825080440.GA17407@kili/
Fixes: 4342306f0f0d ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Commit e26f023e01ef ("firmware/dmi: Include product_sku info to modalias")
added a new field to the modalias in the middle of the modalias, breaking
some existing udev/hwdb matches on the whole modalias without a wildcard
('*') in between the pvr and rvn fields.
All modalias matches in e.g. :
https://github.com/systemd/systemd/blob/main/hwdb.d/60-sensor.hwdb
deliberately end in ':*' so that new fields can be added at *the end* of
the modalias, but adding a new field in the middle like this breaks things.
Move the new sku field to the end of the modalias to fix some hwdb
entries no longer matching.
The new sku field has already been put to use in 2 new hwdb entries:
sensor:modalias:platform:HID-SENSOR-200073:dmi:*svnDell*:sku0A3E:*
ACCEL_LOCATION=base
sensor:modalias:platform:HID-SENSOR-200073:dmi:*svnDell*:sku0B0B:*
ACCEL_LOCATION=base
The wildcard use before and after the sku in these matches means that they
should keep working with the sku moved to the end.
Note that there is a second instance of in essence the same problem,
commit f5152f4ded3c ("firmware/dmi: Report DMI Bios & EC firmware release")
Added 2 new br and efr fields in the middle of the modalias. This too
breaks some hwdb modalias matches, but this has gone unnoticed for over
a year. So some newer hwdb modalias matches actually depend on these
fields being in the middle of the string. Moving these to the end now
would break 3 hwdb entries, while fixing 8 entries.
Since there is no good answer for the new br and efr fields I have chosen
to leave these as is. Instead I'll submit a hwdb update to put a wildcard
at the place where these fields may or may not be present depending on the
kernel version.
BugLink: https://github.com/systemd/systemd/issues/20550
Link: https://github.com/systemd/systemd/pull/20562
Fixes: e26f023e01ef ("firmware/dmi: Include product_sku info to modalias")
Cc: stable@vger.kernel.org
Cc: Kai-Chuan Hsieh <kaichuan.hsieh@canonical.com>
Cc: Erwan Velu <e.velu@criteo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
|
|
Pull xfs updates from Darrick Wong:
"There's a lot in this cycle.
Starting with bug fixes: To avoid livelocks between the logging code
and the quota code, we've disabled the ability of quotaoff to turn off
quota accounting. (Admins can still disable quota enforcement, but
truly turning off accounting requires a remount.) We've tried to do
this in a careful enough way that there shouldn't be any user visible
effects aside from quotaoff no longer randomly hanging the system.
We've also fixed some bugs in runtime log behavior that could trip up
log recovery if (otherwise unrelated) transactions manage to start and
commit concurrently; some bugs in the GETFSMAP ioctl where we would
incorrectly restrict the range of records output if the two xfs
devices are of different sizes; a bug that resulted in fallocate
funshare failing unnecessarily; and broken behavior in the xfs inode
cache when DONTCACHE is in play.
As for new features: we now batch inode inactivations in percpu
background threads, which sharply decreases frontend thread wait time
when performing file deletions and should improve overall directory
tree deletion times. This eliminates both the problem where closing an
unlinked file (especially on a frozen fs) can stall for a long time,
and should also ease complaints about direct reclaim bogging down on
unlinked file cleanup.
Starting with this release, we've enabled pipelining of the XFS log.
On workloads with high rates of metadata updates to different shards
of the filesystem, multiple threads can be used to format committed
log updates into log checkpoints.
Lastly, with this release, two new features have graduated to
supported status: inode btree counters (for faster mounts), and
support for dates beyond Y2038. Expect these to be enabled by default
in a future release of xfsprogs.
Summary:
- Fix a potential log livelock on busy filesystems when there's so
much work going on that we can't finish a quotaoff before filling
up the log by removing the ability to disable quota accounting.
- Introduce the ability to use per-CPU data structures in XFS so that
we can do a better job of maintaining CPU locality for certain
operations.
- Defer inode inactivation work to per-CPU lists, which will help us
batch that processing. Deletions of large sparse files will
*appear* to run faster, but all that means is that we've moved the
work to the backend.
- Drop the EXPERIMENTAL warnings from the y2038+ support and the
inode btree counters, since it's been nearly a year and no
complaints have come in.
- Remove more of our bespoke kmem* variants in favor of using the
standard Linux calls.
- Prepare for the addition of log incompat features in upcoming
cycles by actually adding code to support this.
- Small cleanups of the xattr code in preparation for landing support
for full logging of extended attribute updates in a future cycle.
- Replace the various log shutdown state and flag code all over xfs
with a single atomic bit flag.
- Fix a serious log recovery bug where log item replay can be skipped
based on the start lsn of a transaction even though the transaction
commit lsn is the key data point for that by enforcing start lsns
to appear in the log in the same order as commit lsns.
- Enable pipelining in the code that pushes log items to disk.
- Drop ->writepage.
- Fix some bugs in GETFSMAP where the last fsmap record reported for
a device could extend beyond the end of the device, and a separate
bug where query keys for one device could be applied to another.
- Don't let GETFSMAP query functions edit their input parameters.
- Small cleanups to the scrub code's handling of perag structures.
- Small cleanups to the incore inode tree walk code.
- Constify btree function parameters that aren't changed, so that
there will never again be confusion about range query functions
changing their input parameters.
- Standardize the format and names of tracepoint data attributes.
- Clean up all the mount state and feature flags to use wrapped
bitset functions instead of inconsistently open-coded flag checks.
- Fix some confusion between xfs_buf hash table key variable vs.
block number.
- Fix a mis-interaction with iomap where we reported shared delalloc
cow fork extents to iomap, which would cause the iomap unshare
operation to return IO errors unnecessarily.
- Fix DONTCACHE behavior"
* tag 'xfs-5.15-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (103 commits)
xfs: fix I_DONTCACHE
xfs: only set IOMAP_F_SHARED when providing a srcmap to a write
xfs: fix perag structure refcounting error when scrub fails
xfs: rename buffer cache index variable b_bn
xfs: convert bp->b_bn references to xfs_buf_daddr()
xfs: introduce xfs_buf_daddr()
xfs: kill xfs_sb_version_has_v3inode()
xfs: introduce xfs_sb_is_v5 helper
xfs: remove unused xfs_sb_version_has wrappers
xfs: convert xfs_sb_version_has checks to use mount features
xfs: convert scrub to use mount-based feature checks
xfs: open code sb verifier feature checks
xfs: convert xfs_fs_geometry to use mount feature checks
xfs: replace XFS_FORCED_SHUTDOWN with xfs_is_shutdown
xfs: convert remaining mount flags to state flags
xfs: convert mount flags to features
xfs: consolidate mount option features in m_features
xfs: replace xfs_sb_version checks with feature flag checks
xfs: reflect sb features in xfs_mount
xfs: rework attr2 feature and mount options
...
|
|
Add compatible string for i.MX8ULP platform which support audio
function through rpmsg audio channel on M core.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1630553525-25655-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move notify between drivers is an option of DMA-BUF. Enabling
DMABUF_MOVE_NOTIFY without DMA_SHARED_BUFFER does not have any impact,
as drivers/dma-buf/ is not entered during the build when
DMA_SHARED_BUFFER is disabled.
Fixes: bb42df4662a44765 ("dma-buf: add dynamic DMA-buf handling v15")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902124913.2698760-2-geert@linux-m68k.org
|
|
The function bfq_setup_merge prepares the merging between two
bfq_queues, say bfqq and new_bfqq. To this goal, it assigns
bfqq->new_bfqq = new_bfqq. Then, each time some I/O for bfqq arrives,
the process that generated that I/O is disassociated from bfqq and
associated with new_bfqq (merging is actually a redirection). In this
respect, bfq_setup_merge increases new_bfqq->ref in advance, adding
the number of processes that are expected to be associated with
new_bfqq.
Unfortunately, the stable-merging mechanism interferes with this
setup. After bfqq->new_bfqq has been set by bfq_setup_merge, and
before all the expected processes have been associated with
bfqq->new_bfqq, bfqq may happen to be stably merged with a different
queue than the current bfqq->new_bfqq. In this case, bfqq->new_bfqq
gets changed. So, some of the processes that have been already
accounted for in the ref counter of the previous new_bfqq will not be
associated with that queue. This creates an unbalance, because those
references will never be decremented.
This commit fixes this issue by reestablishing the previous, natural
behaviour: once bfqq->new_bfqq has been set, it will not be changed
until all expected redirections have occurred.
Signed-off-by: Davide Zini <davidezini2@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Link: https://lore.kernel.org/r/20210802141352.74353-2-paolo.valente@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If CONFIG_BLK_DEBUG_FS=n:
block/mq-deadline.c:274:12: warning: ‘dd_queued’ defined but not used [-Wunused-function]
274 | static u32 dd_queued(struct deadline_data *dd, enum dd_prio prio)
| ^~~~~~~~~
Fix this by moving dd_queued() just before the sole function that calls
it.
Fixes: 7b05bf771084ff78 ("Revert "block/mq-deadline: Prioritize high-priority requests"")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 38ba64d12d4c ("block/mq-deadline: Track I/O statistics")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210830091128.1854266-1-geert@linux-m68k.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Setting DSA_MAX_PORTS caused DSA to call b53 callbacks (e.g.
b53_disable_port() during dsa_register_switch()) for invalid
(non-existent) ports. That made b53 modify unrelated registers and is
one of reasons for a broken BCM5301x support.
This problem exists for years but DSA_MAX_PORTS usage has changed few
times. It seems the most accurate to reference commit dropping
dsa_switch_alloc() in the Fixes tag.
Fixes: 7e99e3470172 ("net: dsa: remove dsa_switch_alloc helper")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It isn't true that CPU port is always the last one. Switches BCM5301x
have 9 ports (port 6 being inactive) and they use port 5 as CPU by
default (depending on design some other may be CPU ports too).
A more reliable way of determining number of ports is to check for the
last set bit in the "enabled_ports" bitfield.
This fixes b53 internal state, it will allow providing accurate info to
the DSA and is required to fix BCM5301x support.
Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit LN920
0x1061 composition in order to avoid bind error.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the network devices connected to the system beyond
HSO_MAX_NET_DEVICES. add_net_device() in hso_create_net_device()
will be failed for the network_table is full. It will lead to
business failure which rely on network_table, for example,
hso_suspend() and hso_resume(). It will also lead to memory leak
because resource release process can not search the hso_device
object from network_table in hso_free_interface().
Add failure handler for add_net_device() in hso_create_net_device()
to solve the above problems.
Fixes: 72dc1c096c70 ("HSO: add option hso driver")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 3df98d79215ace13 ("lsm,selinux: pass flowi_common instead of flowi
to the LSM hooks") introduced flowi{4,6}_to_flowi_common() functions which
cause UBSAN warning when building with LLVM 11.0.1 on Ubuntu 21.04.
================================================================================
UBSAN: object-size-mismatch in ./include/net/flow.h:197:33
member access within address ffffc9000109fbd8 with insufficient space
for an object of type 'struct flowi'
CPU: 2 PID: 7410 Comm: systemd-resolve Not tainted 5.14.0 #51
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020
Call Trace:
dump_stack_lvl+0x103/0x171
ubsan_type_mismatch_common+0x1de/0x390
__ubsan_handle_type_mismatch_v1+0x41/0x50
udp_sendmsg+0xda2/0x1300
? ip_skb_dst_mtu+0x1f0/0x1f0
? sock_rps_record_flow+0xe/0x200
? inet_send_prepare+0x2d/0x90
sock_sendmsg+0x49/0x80
____sys_sendmsg+0x269/0x370
__sys_sendmsg+0x15e/0x1d0
? syscall_enter_from_user_mode+0xf0/0x1b0
do_syscall_64+0x3d/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f7081a50497
Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
RSP: 002b:00007ffc153870f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f7081a50497
RDX: 0000000000000000 RSI: 00007ffc15387140 RDI: 000000000000000c
RBP: 00007ffc15387140 R08: 0000563f29a5e4fc R09: 000000000000cd28
R10: 0000563f29a68a30 R11: 0000000000000246 R12: 000000000000000c
R13: 0000000000000001 R14: 0000563f29a68a30 R15: 0000563f29a5e50c
================================================================================
I don't think we need to call flowi{4,6}_to_flowi() from these functions
because the first member of "struct flowi4" and "struct flowi6" is
struct flowi_common __fl_common;
while the first member of "struct flowi" is
union {
struct flowi_common __fl_common;
struct flowi4 ip4;
struct flowi6 ip6;
struct flowidn dn;
} u;
which should point to the same address without access to "struct flowi".
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes kernel NULL pointer dereference when creating nexthop
which is bound with SRv6 decapsulation. In the creation of nexthop,
__seg6_end_dt_vrf_build is called. __seg6_end_dt_vrf_build expects
fc_lninfo in fib6_config is set correctly, but it isn't set in
nh_create_ipv6, which causes kernel crash.
Here is steps to reproduce kernel crash:
1. modprobe vrf
2. ip -6 nexthop add encap seg6local action End.DT4 vrftable 1 dev eth0
We got the following message:
[ 901.370336] BUG: kernel NULL pointer dereference, address: 0000000000000ba0
[ 901.371658] #PF: supervisor read access in kernel mode
[ 901.372672] #PF: error_code(0x0000) - not-present page
[ 901.373672] PGD 0 P4D 0
[ 901.374248] Oops: 0000 [#1] SMP PTI
[ 901.374944] CPU: 0 PID: 8593 Comm: ip Not tainted 5.14-051400-generic #202108310811-Ubuntu
[ 901.376404] Hardware name: Red Hat KVM, BIOS 1.11.1-4.module_el8.2.0+320+13f867d7 04/01/2014
[ 901.377907] RIP: 0010:vrf_ifindex_lookup_by_table_id+0x19/0x90 [vrf]
[ 901.379182] Code: c1 e9 72 ff ff ff e8 96 49 01 c2 66 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 89 f5 41 54 53 8b 05 47 4c 00 00 <48> 8b 97 a0 0b 00 00 48 8b 1c c2 e8 57 27 53 c1 4c 8d a3 88 00 00
[ 901.382652] RSP: 0018:ffffbf2d02043590 EFLAGS: 00010282
[ 901.383746] RAX: 000000000000000b RBX: ffff990808255e70 RCX: ffffbf2d02043aa8
[ 901.385436] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 0000000000000000
[ 901.386924] RBP: ffffbf2d020435b0 R08: 00000000000000c0 R09: ffff990808255e40
[ 901.388537] R10: ffffffff83b08c90 R11: 0000000000000009 R12: 0000000000000000
[ 901.389937] R13: 0000000000000001 R14: 0000000000000000 R15: 000000000000000b
[ 901.391226] FS: 00007fe49381f740(0000) GS:ffff99087dc00000(0000) knlGS:0000000000000000
[ 901.392737] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 901.393803] CR2: 0000000000000ba0 CR3: 000000000e3e8003 CR4: 0000000000770ef0
[ 901.395122] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 901.396496] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 901.397833] PKRU: 55555554
[ 901.398578] Call Trace:
[ 901.399144] l3mdev_ifindex_lookup_by_table_id+0x3b/0x70
[ 901.400179] __seg6_end_dt_vrf_build+0x34/0xd0
[ 901.401067] seg6_end_dt4_build+0x16/0x20
[ 901.401904] seg6_local_build_state+0x271/0x430
[ 901.402797] lwtunnel_build_state+0x81/0x130
[ 901.403645] fib_nh_common_init+0x82/0x100
[ 901.404465] ? sock_def_readable+0x4b/0x80
[ 901.405285] fib6_nh_init+0x115/0x7c0
[ 901.406033] nh_create_ipv6.isra.0+0xe1/0x140
[ 901.406932] rtm_new_nexthop+0x3b7/0xeb0
[ 901.407828] rtnetlink_rcv_msg+0x152/0x3a0
[ 901.408663] ? rtnl_calcit.isra.0+0x130/0x130
[ 901.409535] netlink_rcv_skb+0x55/0x100
[ 901.410319] rtnetlink_rcv+0x15/0x20
[ 901.411026] netlink_unicast+0x1a8/0x250
[ 901.411813] netlink_sendmsg+0x238/0x470
[ 901.412602] ? _copy_from_user+0x2b/0x60
[ 901.413394] sock_sendmsg+0x65/0x70
[ 901.414112] ____sys_sendmsg+0x218/0x290
[ 901.414929] ? copy_msghdr_from_user+0x5c/0x90
[ 901.415814] ___sys_sendmsg+0x81/0xc0
[ 901.416559] ? fsnotify_destroy_marks+0x27/0xf0
[ 901.417447] ? call_rcu+0xa4/0x230
[ 901.418153] ? kmem_cache_free+0x23f/0x410
[ 901.418972] ? dentry_free+0x37/0x70
[ 901.419705] ? mntput_no_expire+0x4c/0x260
[ 901.420574] __sys_sendmsg+0x62/0xb0
[ 901.421297] __x64_sys_sendmsg+0x1f/0x30
[ 901.422057] do_syscall_64+0x5c/0xc0
[ 901.422756] ? syscall_exit_to_user_mode+0x27/0x50
[ 901.423675] ? __x64_sys_close+0x12/0x40
[ 901.424462] ? do_syscall_64+0x69/0xc0
[ 901.425219] ? irqentry_exit_to_user_mode+0x9/0x20
[ 901.426149] ? irqentry_exit+0x19/0x30
[ 901.426901] ? exc_page_fault+0x89/0x160
[ 901.427709] ? asm_exc_page_fault+0x8/0x30
[ 901.428536] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 901.429514] RIP: 0033:0x7fe493945747
[ 901.430248] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[ 901.433549] RSP: 002b:00007ffe9932cf68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 901.434981] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe493945747
[ 901.436303] RDX: 0000000000000000 RSI: 00007ffe9932cfe0 RDI: 0000000000000003
[ 901.437607] RBP: 00000000613053f7 R08: 0000000000000001 R09: 00007ffe9932d07c
[ 901.438990] R10: 000055f4a903a010 R11: 0000000000000246 R12: 0000000000000001
[ 901.440340] R13: 0000000000000001 R14: 000055f4a802b163 R15: 000055f4a8042020
[ 901.441630] Modules linked in: vrf nls_utf8 isofs nls_iso8859_1 dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua intel_rapl_msr intel_rapl_common isst_if_mbox_msr isst_if_common nfit rapl input_leds joydev serio_raw qemu_fw_cfg mac_hid sch_fq_codel drm virtio_rng ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd virtio_net net_failover cryptd psmouse virtio_blk failover i2c_piix4 pata_acpi floppy
[ 901.450808] CR2: 0000000000000ba0
[ 901.451514] ---[ end trace c27b934b99ade304 ]---
[ 901.452403] RIP: 0010:vrf_ifindex_lookup_by_table_id+0x19/0x90 [vrf]
[ 901.453626] Code: c1 e9 72 ff ff ff e8 96 49 01 c2 66 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 89 f5 41 54 53 8b 05 47 4c 00 00 <48> 8b 97 a0 0b 00 00 48 8b 1c c2 e8 57 27 53 c1 4c 8d a3 88 00 00
[ 901.456910] RSP: 0018:ffffbf2d02043590 EFLAGS: 00010282
[ 901.457912] RAX: 000000000000000b RBX: ffff990808255e70 RCX: ffffbf2d02043aa8
[ 901.459238] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 0000000000000000
[ 901.460552] RBP: ffffbf2d020435b0 R08: 00000000000000c0 R09: ffff990808255e40
[ 901.461882] R10: ffffffff83b08c90 R11: 0000000000000009 R12: 0000000000000000
[ 901.463208] R13: 0000000000000001 R14: 0000000000000000 R15: 000000000000000b
[ 901.464529] FS: 00007fe49381f740(0000) GS:ffff99087dc00000(0000) knlGS:0000000000000000
[ 901.466058] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 901.467189] CR2: 0000000000000ba0 CR3: 000000000e3e8003 CR4: 0000000000770ef0
[ 901.468515] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 901.469858] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 901.471139] PKRU: 55555554
Signed-off-by: Ryoga Saito <contact@proelbtn.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I tried to make this check stricter as a hardenning measure but it broke
audo and wifi on these devices so revert it.
Fixes: aaa8e4922c88 ("net: qrtr: make checks in qrtr_endpoint_post() stricter")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, outgoing packets larger than 1496 bytes are dropped when
tagged VLAN is used on a switch port.
Add the frame check sequence length to the value of the register
GSWIP_MAC_FLEN to fix this. This matches the lantiq_ppa vendor driver,
which uses a value consisting of 1518 bytes for the MAC frame, plus the
lengths of special tag and VLAN tags.
Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test case for commit a6e3f2985a80 ("ip6_tunnel: fix GRE6 segmentation").
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mld_process_v2 only returned 0.
So, the return type is changed to void.
Signed-off-by: Jiwon Kim <jiwonaid0@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
drivers/net/ethernet/i825xx/sun3_82586.c: In function ‘sun3_82586_probe’:
drivers/net/ethernet/i825xx/sun3_82586.c:317:9: warning: returning ‘struct net_device *’ from a function with return type ‘int’ makes integer from pointer without a cast [-Wint-conversion]
317 | return dev;
| ^~~
The return type of sun3_82586_probe() was changed, but one return value
was forgotten to be updated.
Fixes: e179d78ee11a70e2 ("m68k: remove legacy probing")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Starting with following patch MIPS Malta is not able to boot:
| commit 79edff12060fe7772af08607eff50c0e2486c5ba
| Author: Rob Herring <robh@kernel.org>
| scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9
The reason is the alignment test added to the fdt_ro_probe_(). To fix
this issue, we need to make sure that fdt_buf is aligned.
Since the dtc patch was designed to uncover potential issue, I handle
initial MIPS Malta patch as initial bug.
Fixes: e81a8c7dabac ("MIPS: Malta: Setup RAM regions via DT")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Pull documentation updates from Jonathan Corbet:
"Yet another set of documentation changes:
- A reworking of PDF generation to yield better results for documents
using CJK fonts in particular.
- A new set of translations into traditional Chinese, a dialect for
which I am assured there is a community of interested readers.
- A lot more regular Chinese translation work as well.
... plus the usual assortment of updates, fixes, typo tweaks, etc"
* tag 'docs-5.15' of git://git.lwn.net/linux: (55 commits)
docs: sphinx-requirements: Move sphinx_rtd_theme to top
docs: pdfdocs: Enable language-specific font choice of zh_TW translations
docs: pdfdocs: Teach xeCJK about character classes of quotation marks
docs: pdfdocs: Permit AutoFakeSlant for CJK fonts
docs: pdfdocs: One-half spacing for CJK translations
docs: pdfdocs: Add conf.py local to translations for ascii-art alignment
docs: pdfdocs: Preserve inter-phrase space in Korean translations
docs: pdfdocs: Choose Serif font as CJK mainfont if possible
docs: pdfdocs: Add CJK-language-specific font settings
docs: pdfdocs: Refactor config for CJK document
scripts/kernel-doc: Override -Werror from KCFLAGS with KDOC_WERROR
docs/zh_CN: Add zh_CN/accounting/psi.rst
doc: align Italian translation
Documentation/features/vm: riscv supports THP now
docs/zh_CN: add infiniband user_verbs translation
docs/zh_CN: add infiniband user_mad translation
docs/zh_CN: add infiniband tag_matching translation
docs/zh_CN: add infiniband sysfs translation
docs/zh_CN: add infiniband opa_vnic translation
docs/zh_CN: add infiniband ipoib translation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Optionally, provide an index of possible printk messages via
<debugfs>/printk/index/. It can be used when monitoring important
kernel messages on a farm of various hosts. The monitor has to be
updated when some messages has changed or are not longer available by
a newly deployed kernel.
- Add printk.console_no_auto_verbose boot parameter. It allows to
generate crash dump even with slow consoles in a reasonable time
frame.
- Remove printk_safe buffers. The messages are always stored directly
to the main logbuffer, even in NMI or recursive context. Also it
allows to serialize syslog operations by a mutex instead of a spin
lock.
- Misc clean up and build fixes.
* tag 'printk-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/index: Fix -Wunused-function warning
lib/nmi_backtrace: Serialize even messages about idle CPUs
printk: Add printk.console_no_auto_verbose boot parameter
printk: Remove console_silent()
lib/test_scanf: Handle n_bits == 0 in random tests
printk: syslog: close window between wait and read
printk: convert @syslog_lock to mutex
printk: remove NMI tracking
printk: remove safe buffers
printk: track/limit recursion
lib/nmi_backtrace: explicitly serialize banner and regs
printk: Move the printk() kerneldoc comment to its new home
printk/index: Fix warning about missing prototypes
MIPS/asm/printk: Fix build failure caused by printk
printk: index: Add indexing support to dev_printk
printk: Userspace format indexing support
printk: Rework parse_prefix into printk_parse_prefix
printk: Straighten out log_flags into printk_info_flags
string_helpers: Escape double quotes in escape_special
printk/console: Check consistent sequence number when handling race in console_unlock()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Refactor arch kdump DT related code to a common implementation
- Add fw_devlink tracking for 'phy-handle', 'leds', 'backlight',
'resets', and 'pwm' properties
- Various clean-ups to DT FDT code
- Fix a runtime error for !CONFIG_SYSFS
- Convert Synopsys DW PCI and derivative binding docs to schemas. Add
Toshiba Visconti PCIe binding.
- Convert a bunch of memory controller bindings to schemas
- Covert eeprom-93xx46, Samsung Exynos TRNG, Samsung Exynos IRQ
combiner, arm-charlcd, img-ascii-lcd, UniPhier eFuse, Xilinx Zynq
MPSoC FPGA, Xilinx Zynq MPSoC reset, Mediatek mmsys, Gemini boards,
brcm,iproc-i2c, faraday,ftpci100, and ks8851 net to DT schema.
- Extend nvmem bindings to handle bit offsets in unit-addresses
- Add DT schemas for HiKey 970 PCIe PHY
- Remove unused ZTE, energymicro,efm32-timer, and Exynos SATA bindings
- Enable dtc pci_device_reg warning by default
- Fixes for handling 'unevaluatedProperties' in preparation to enable
pending support in the tooling for jsonschema 2020-12 draft
* tag 'devicetree-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
dt-bindings: display: remove zte,vou.txt binding doc
dt-bindings: hwmon: merge max1619 into trivial devices
dt-bindings: mtd-physmap: Add 'arm,vexpress-flash' compatible
dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema
dt-bindings: Use 'enum' instead of 'oneOf' plus 'const' entries
dt-bindings: Add vendor prefix for Topic Embedded Systems
of: fdt: Rename reserve_elfcorehdr() to fdt_reserve_elfcorehdr()
arm64: kdump: Remove custom linux,usable-memory-range handling
arm64: kdump: Remove custom linux,elfcorehdr handling
riscv: Remove non-standard linux,elfcorehdr handling
of: fdt: Use IS_ENABLED(CONFIG_BLK_DEV_INITRD) instead of #ifdef
of: fdt: Add generic support for handling usable memory range property
of: fdt: Add generic support for handling elf core headers property
crash_dump: Make elfcorehdr address/size symbols always visible
dt-bindings: memory: convert Samsung Exynos DMC to dtschema
dt-bindings: devfreq: event: convert Samsung Exynos PPMU to dtschema
dt-bindings: devfreq: event: convert Samsung Exynos NoCP to dtschema
kbuild: Enable dtc 'pci_device_reg' warning by default
dt-bindings: soc: remove obsolete zte zx header
dt-bindings: clock: remove obsolete zte zx header
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"A collection of fixes:
- flexcan platform support (for m5441x)
- fix CONFIG_ROMKERNEL linking
- fix compilation when CONFIG_ISA_DMA_API is set
- fix local ColdFire clk_enable() for NULL clk"
* tag 'm68knommu-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: only set CONFIG_ISA_DMA_API for ColdFire sub-arch
m68k: coldfire: return success for clk_enable(NULL)
m68k: m5441x: add flexcan support
m68k: stmark2: update board setup
m68k/nommu: prevent setting ROMKERNEL when ROM is not set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- make Hyper-V code arch-agnostic (Michael Kelley)
- fix sched_clock behaviour on Hyper-V (Ani Sinha)
- fix a fault when Linux runs as the root partition on MSHV (Praveen
Kumar)
- fix VSS driver (Vitaly Kuznetsov)
- cleanup (Sonia Sharma)
* tag 'hyperv-next-signed-20210831' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv_utils: Set the maximum packet size for VSS driver to the length of the receive buffer
Drivers: hv: Enable Hyper-V code to be built on ARM64
arm64: efi: Export screen_info
arm64: hyperv: Initialize hypervisor on boot
arm64: hyperv: Add panic handler
arm64: hyperv: Add Hyper-V hypercall and register access utilities
x86/hyperv: fix root partition faults when writing to VP assist page MSR
hv: hyperv.h: Remove unused inline functions
drivers: hv: Decouple Hyper-V clock/timer code from VMbus drivers
x86/hyperv: add comment describing TSC_INVARIANT_CONTROL MSR setting bit 0
Drivers: hv: Move Hyper-V misc functionality to arch-neutral code
Drivers: hv: Add arch independent default functions for some Hyper-V handlers
Drivers: hv: Make portions of Hyper-V init code be arch neutral
x86/hyperv: fix for unwanted manipulation of sched_clock when TSC marked unstable
asm-generic/hyperv: Add missing #include of nmi.h
|
|
This patch adds OEM Intel GMA command and response handler for it.
Signed-off-by: Brad Ho <Brad_Ho@phoenix.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Link: https://lore.kernel.org/r/20210830171806.119857-2-i.mikhaylov@yadro.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Parameter names in the comments did not match the function arguments.
Fixes: 213808170840 ("bnxt_en: add support for HWRM request slices")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210901185315.57137-1-edwin.peer@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull ARM SoC DT updates from Arnd Bergmann:
"As usual, the bulk of work in the SoC tree goes into DT files, this
time with a roughly even split between 32-bit and 64-bit SoCs rather
than the usual mostly 64-bit changes.
New SoCs:
- Microchip SAMA7 SoC family based on Cortex-A7, a new 32-bit
platform based on the older SAMA5 series.
- Qualcomm Snapdragon SDM636 and SM8150, variations of the existing
phone SoCs.
- Renesas R-Car H3e-2G and M3e-2G SoCs, variations of older Renesas
SoCs.
New boards:
- Marvell CN913x reference boards
- ASpeed AST2600 BMC implementations for Facebook Cloudripper, Elbert
and Fuji server boards.
- Snapdragon 665 based Sony Xperia 10II
- Snapdragon MSM8916 based Xiaomi Redmi 2
- Snapdragon MSM8226 based Samsung Galaxy S3 Neo
- NXP i.MX based 32-bit boards:
- DHCOM based PicoITX
- DHSOM based DRC0ỉ
- SolidRun SolidSense
- SKOV i.MX6 boards.
- NXP i.MX based 64-bit boards:
- Nitrogen8 SoM and MNT Reform2
- LS1088A based Traverse Ten64
- i.MX8M based GW7902.
- NVIDIA Jetson TX2 NX Developer Kit
- 4KOpen STiH418-b2264 development board
- ux500 based Samsung phones: Gavini, Codina and Kyle
- TI AM335x based Sancloud BBE Lite
- ixp4xx dts files to replace all old board files
Other changes:
- Treewide fixes for dtc warnings
- Rockchips i/o domain support
- TI OMAP/AM3 CPSW switch driver support
- Improved device support for allwinner, aspeed, qualcomm, NXP,
nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti,
OMAP and actions"
* tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (412 commits)
arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings
ARM: dts: rockchip: Add SFC to RV1108
arm64: dts: marvell: armada-37xx: Extend PCIe MEM space
ARM: dts: aspeed: p10bmc: Add power control pins
ARM: dts: aspeed: cloudripper: Add comments for "mdio1"
ARM: dts: aspeed: minipack: Update flash partition table
dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board
dt-bindings: vendor-prefixes: add Traverse Technologies
arm64: dts: add device tree for Traverse Ten64 (LS1088A)
arm64: dts: ls1088a: add missing PMU node
arm64: dts: ls1088a: add internal PCS for DPMAC1 node
ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz
ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node
ARM: dts: add SKOV imx6q and imx6dl based boards
dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards
dt-bindings: vendor-prefixes: Add an entry for SKOV A/S
arm64: dts: imx8mq-reform2: add sound support
arm64: dts: imx8m: drop interrupt-affinity for pmu
arm64: dts: imx8qxp: update pmu compatible
arm64: dts: imx8mm: update pmu compatible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"The usual set of defconfig updates, including one new defconfig file
for the new sama7 family of SoCs"
* tag 'defconfig-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: config: aspeed: Regenerate defconfigs
ARM: config: aspeed_g4: Enable EDAC and SPGIO
ARM: config: aspeed: Enable KCS adapter for raw SerIO
ARM: config: aspeed: Enable hardened allocator feature
ARM: imx_v6_v7_defconfig: enable driver of the LTC3676 PMIC
ARM: multi_v7_defconfig: Enable CONFIG_TEGRA30_TSENSOR
ARM: multi_v7_defconfig: Enable Acer A500 drivers
ARM: tegra: Rebuild default configuration
ARM: tegra: Enable CONFIG_CROS_EC
ARM: tegra: Enable Acer A500 drivers
ARM: tegra: Enable CONFIG_FB
ARM: tegra: Enable CONFIG_TEGRA30_TSENSOR
ARM: configs: multi_v7: enable PL35x NAND controller
arm64: defconfig: Enable Qualcomm MSM8996 CPU clock driver
ARM: imx_v6_v7_defconfig: Let CONFIG_SCSI_LOWLEVEL be selected
ARM: imx_v6_v7_defconfig: Select CONFIG_KPROBES
ARM: multi_v7_defconfig: Enable CONFIG_MMC_MESON_MX_SDHC
ARM: multi_v7_defconfig: add sama7g5 SoC
ARM: configs: at91: add defconfig for sama7 family of SoCs
|
|
'clk-ralink' into clk-next
* clk-kirkwood:
clk: kirkwood: Fix a clocking boot regression
* clk-imx:
clk: imx8mn: Add M7 core clock
clk: imx8m: fix clock tree update of TF-A managed clocks
clk: imx: clk-divider-gate: Switch to clk_divider.determine_rate
clk: imx8mn: use correct mux type for clkout path
clk: imx8mm: use correct mux type for clkout path
* clk-doc:
dt-bindings: clock: samsung: fix header path in example
MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry
dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema
dt-bindings: clock: samsung: convert Exynos AudSS to dtschema
dt-bindings: clock: samsung: convert Exynos4 to dtschema
dt-bindings: clock: samsung: convert Exynos3250 to dtschema
dt-bindings: clock: samsung: convert Exynos542x to dtschema
dt-bindings: clock: samsung: add bindings for Exynos external clock
dt-bindings: clock: samsung: convert Exynos5250 to dtschema
dt-bindings: clock: brcm,iproc-clocks: fix armpll properties
clk: zynqmp: Fix kernel-doc format
clk: at91: sama7g5: remove all kernel-doc & kernel-doc warnings
clk: zynqmp: fix kernel doc
* clk-zynq:
clk: zynqmp: Fix a memory leak
clk: zynqmp: Check the return type
* clk-ralink:
clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates
|
|
clk-next
- Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators
* clk-nvidia:
clk: tegra: fix old-style declaration
clk: tegra: Remove CLK_IS_CRITICAL flag from fuse clock
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
soc/tegra: fuse: Add runtime PM support
soc/tegra: fuse: Clear fuse->clk on driver probe failure
soc/tegra: pmc: Prevent racing with cpuilde driver
soc/tegra: bpmp: Remove unused including <linux/version.h>
* clk-rockchip:
clk: rockchip: make rk3308 ddrphy4x clock critical
clk: rockchip: drop GRF dependency for rk3328/rk3036 pll types
dt-bindings: clk: Convert rockchip,rk3399-cru to DT schema
clk: rockchip: Add support for hclk_sfc on rk3036
clk: rockchip: rk3036: fix up the sclk_sfc parent error
clk: rockchip: add dt-binding clkid for hclk_sfc on rk3036
* clk-at91:
clk: at91: clk-generated: Limit the requested rate to our range
* clk-vc5:
clk: vc5: Add properties for configuring SD/OE behavior
clk: vc5: Use dev_err_probe
dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin
|
|
- Add power of two flag to fractional divider clk type
* clk-frac-divider:
clk: fractional-divider: Document the arithmetics used behind the code
clk: fractional-divider: Introduce POWER_OF_TWO_PS flag
clk: fractional-divider: Hide clk_fractional_divider_ops from wide audience
clk: fractional-divider: Export approximation algorithm to the CCF users
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform support
and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas"
* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
reset: simple: remove ZTE details in Kconfig help
soc: rockchip: io-domain: Remove unneeded semicolon
soc: rockchip: io-domain: add rk3568 support
dt-bindings: power: add rk3568-pmu-io-domain support
bus: ixp4xx: return on error in ixp4xx_exp_probe()
soc: renesas: Prefer memcpy() over strcpy()
firmware: tegra: Stop using seq_get_buf()
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
soc/tegra: fuse: Add runtime PM support
soc/tegra: fuse: Clear fuse->clk on driver probe failure
soc/tegra: pmc: Prevent racing with cpuilde driver
soc/tegra: bpmp: Remove unused including <linux/version.h>
dt-bindings: soc: ti: pruss: Add dma-coherent property
soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
firmware: arm_scmi: Use WARN_ON() to check configured transports
firmware: arm_scmi: Fix boolconv.cocci warnings
soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
soc: mediatek: mmsys: add MT8365 support
...
|
|
clk-next
- Migrate some clk drivers to clk_divider_ops.determine_rate
* clk-renesas:
clk: renesas: Make CLK_R9A06G032 invisible
clk: renesas: r9a07g044: Add entry for fixed clock P0_DIV2
dt-bindings: clock: r9a07g044-cpg: Add entry for P0_DIV2 core clock
clk: renesas: r9a07g044: Add clock and reset entries for ADC
clk: renesas: r9a07g044: Add clock and reset entries for CANFD
clk: renesas: Rename renesas-rzg2l-cpg.[ch] to rzg2l-cpg.[ch]
clk: renesas: r9a07g044: Add GPIO clock and reset entries
clk: renesas: r9a07g044: Add SSIF-2 clock and reset entries
clk: renesas: r9a07g044: Add USB clocks/resets
clk: renesas: r9a07g044: Add DMAC clocks/resets
clk: renesas: r9a07g044: Add I2C clocks/resets
clk: renesas: r8a779a0: Add the DSI clocks
clk: renesas: r8a779a0: Add the DU clock
clk: renesas: rzg2: Rename i2c-dvfs to iic-pmic
clk: renesas: rzg2l: Fix off-by-one check in rzg2l_cpg_clk_src_twocell_get()
clk: renesas: rzg2l: Avoid mixing error pointers and NULL
clk: renesas: rzg2l: Fix a double free on error
clk: renesas: rzg2l: Fix return value and unused assignment
clk: renesas: rzg2l: Remove unneeded semicolon
* clk-cleanup:
clk: palmas: Add a missing SPDX license header
clk: Align provider-specific CLK_* bit definitions
* clk-determine-divider:
clk: stm32mp1: Switch to clk_divider.determine_rate
clk: stm32h7: Switch to clk_divider.determine_rate
clk: stm32f4: Switch to clk_divider.determine_rate
clk: bcm2835: Switch to clk_divider.determine_rate
clk: divider: Implement and wire up .determine_rate by default
|
|
'clk-x86' into clk-next
- Support video, gpu, display clks on qcom sc7280 SoCs
- GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs
- Multimedia clks (MMCC) on qcom MSM8994/MSM8992
- Migrate to clk_parent_data in gcc-sdm660
- RPMh clks on qcom SM6350 SoCs
- Support for Mediatek MT8192 SoCs
* clk-qcom: (38 commits)
clk: qcom: Add SM6350 GCC driver
dt-bindings: clock: Add SM6350 GCC clock bindings
clk: qcom: rpmh: Add support for RPMH clocks on SM6350
dt-bindings: clock: Add RPMHCC bindings for SM6350
clk: qcom: adjust selects for SM_VIDEOCC_8150 and SM_VIDEOCC_8250
clk: qcom: Add Global Clock controller (GCC) driver for SM6115
dt-bindings: clk: qcom: gcc-sm6115: Document SM6115 GCC
clk: qcom: mmcc-msm8994: Add MSM8992 support
clk: qcom: Add msm8994 MMCC driver
dt-bindings: clock: Add support for MSM8992/4 MMCC
clk: qcom: Add Global Clock Controller driver for MSM8953
dt-bindings: clock: add Qualcomm MSM8953 GCC driver bindings
clk: qcom: gcc-sdm660: Replace usage of parent_names
clk: qcom: gcc-sdm660: Move parent tables after PLLs
clk: qcom: use devm_pm_runtime_enable and devm_pm_clk_create
PM: runtime: add devm_pm_clk_create helper
PM: runtime: add devm_pm_runtime_enable helper
clk: qcom: a53-pll: Add MSM8939 a53pll support
dt-bindings: clock: Update qcom,a53pll bindings for MSM8939 support
clk: qcom: a53pll/mux: Use unique clock name
...
* clk-socfpga:
clk: socfpga: agilex: add the bypass register for s2f_usr0 clock
clk: socfpga: agilex: fix up s2f_user0_clk representation
clk: socfpga: agilex: fix the parents of the psi_ref_clk
* clk-mediatek: (22 commits)
clk: mediatek: make COMMON_CLK_MT8167* depend on COMMON_CLK_MT8167
clk: mediatek: Add MT8192 vencsys clock support
clk: mediatek: Add MT8192 vdecsys clock support
clk: mediatek: Add MT8192 scp adsp clock support
clk: mediatek: Add MT8192 msdc clock support
clk: mediatek: Add MT8192 mmsys clock support
clk: mediatek: Add MT8192 mfgcfg clock support
clk: mediatek: Add MT8192 mdpsys clock support
clk: mediatek: Add MT8192 ipesys clock support
clk: mediatek: Add MT8192 imp i2c wrapper clock support
clk: mediatek: Add MT8192 imgsys clock support
clk: mediatek: Add MT8192 camsys clock support
clk: mediatek: Add MT8192 audio clock support
clk: mediatek: Add MT8192 basic clocks support
clk: mediatek: Add mtk_clk_simple_probe() to simplify clock providers
clk: mediatek: Add configurable enable control to mtk_pll_data
clk: mediatek: Fix asymmetrical PLL enable and disable control
clk: mediatek: Get regmap without syscon compatible check
clk: mediatek: Add dt-bindings of MT8192 clocks
dt-bindings: ARM: Mediatek: Add audsys document binding for MT8192
...
* clk-lmk:
clk: lmk04832: drop redundant fallthrough statements
* clk-x86:
clk: x86: Rename clk-lpt to more specific clk-lpss-atom
|
|
Pull ARM SoC updates from Arnd Bergmann:
"There are three noteworthy updates for 32-bit arm platforms this time:
- The Microchip SAMA7 family based on Cortex-A7 gets introduced, a
new cousin to the older SAM9 (ARM9xx based) and SAMA5 (Cortex-A5
based) SoCs.
- The ixp4xx platform (based on Intel XScale) is finally converted to
device tree, and all the old board files are getting removed now.
- The Cirrus Logic EP93xx platform loses support for the old
MaverickCrunch FPU. Support for compiling user space applications
was already removed in gcc-4.9, and the kernel support for old
applications could not be built with clang ias. After confirming
that there are no remaining users, removing this from the kernel
seemed better than adding support for unused features to clang.
There are minor updates to the aspeed, omap and samsung platforms"
* tag 'soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
soc: aspeed-lpc-ctrl: Fix clock cleanup in error path
ARM: s3c: delete unneed local variable "delay"
soc: aspeed: Re-enable FWH2AHB on AST2600
soc: aspeed: socinfo: Add AST2625 variant
soc: aspeed: p2a-ctrl: Fix boundary check for mmap
soc: aspeed: lpc-ctrl: Fix boundary check for mmap
ARM: ixp4xx: Delete the Freecom FSG-3 boardfiles
ARM: ixp4xx: Delete GTWX5715 board files
ARM: ixp4xx: Delete Coyote and IXDPG425 boardfiles
ARM: ixp4xx: Delete Intel reference design boardfiles
ARM: ixp4xx: Delete Avila boardfiles
ARM: ixp4xx: Delete the Arcom Vulcan boardfiles
ARM: ixp4xx: Delete Gateway WG302v2 boardfiles
ARM: ixp4xx: Delete Omicron boardfiles
ARM: ixp4xx: Delete the D-Link DSM-G600 boardfiles
ARM: ixp4xx: Delete NAS100D boardfiles
ARM: ixp4xx: Delete NSLU2 boardfiles
arm: omap2: Drop the unused OMAP_PACKAGE_* KConfig entries
arm: omap2: Drop obsolete MACH_OMAP3_PANDORA entry
ARM: ep93xx: remove MaverickCrunch support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The main content for 5.15 is a series that cleans up the handling of
strncpy_from_user() and strnlen_user(), removing a lot of slightly
incorrect versions of these in favor of the lib/strn*.c helpers that
implement these correctly and more efficiently.
The only architectures that retain a private version now are mips,
ia64, um and parisc. I had offered to convert those at all, but Thomas
Bogendoerfer wanted to keep the mips version for the moment until he
had a chance to do regression testing.
The branch also contains two patches for bitops and for ffs()"
* tag 'asm-generic-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
bitops/non-atomic: make @nr unsigned to avoid any DIV
asm-generic: ffs: Drop bogus reference to ffz location
asm-generic: reverse GENERIC_{STRNCPY_FROM,STRNLEN}_USER symbols
asm-generic: remove extra strn{cpy_from,len}_user declarations
asm-generic: uaccess: remove inline strncpy_from_user/strnlen_user
s390: use generic strncpy/strnlen from_user
microblaze: use generic strncpy/strnlen from_user
csky: use generic strncpy/strnlen from_user
arc: use generic strncpy/strnlen from_user
hexagon: use generic strncpy/strnlen from_user
h8300: remove stale strncpy_from_user
asm-generic/uaccess.h: remove __strncpy_from_user/__strnlen_user
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for 32-bit tasks on asymmetric AArch32 systems (on top of the
scheduler changes merged via the tip tree).
- More entry.S clean-ups and conversion to C.
- MTE updates: allow a preferred tag checking mode to be set per CPU
(the overhead of synchronous mode is smaller for some CPUs than
others); optimisations for kernel entry/exit path; optionally disable
MTE on the kernel command line.
- Kselftest improvements for SVE and signal handling, PtrAuth.
- Fix unlikely race where a TLBI could use stale ASID on an ASID
roll-over (found by inspection).
- Miscellaneous fixes: disable trapping of PMSNEVFR_EL1 to higher
exception levels; drop unnecessary sigdelsetmask() call in the
signal32 handling; remove BUG_ON when failing to allocate SVE state
(just signal the process); SYM_CODE annotations.
- Other trivial clean-ups: use macros instead of magic numbers, remove
redundant returns, typos.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (56 commits)
arm64: Do not trap PMSNEVFR_EL1
arm64: mm: fix comment typo of pud_offset_phys()
arm64: signal32: Drop pointless call to sigdelsetmask()
arm64/sve: Better handle failure to allocate SVE register storage
arm64: Document the requirement for SCR_EL3.HCE
arm64: head: avoid over-mapping in map_memory
arm64/sve: Add a comment documenting the binutils needed for SVE asm
arm64/sve: Add some comments for sve_save/load_state()
kselftest/arm64: signal: Add a TODO list for signal handling tests
kselftest/arm64: signal: Add test case for SVE register state in signals
kselftest/arm64: signal: Verify that signals can't change the SVE vector length
kselftest/arm64: signal: Check SVE signal frame shows expected vector length
kselftest/arm64: signal: Support signal frames with SVE register data
kselftest/arm64: signal: Add SVE to the set of features we can check for
arm64: replace in_irq() with in_hardirq()
kselftest/arm64: pac: Fix skipping of tests on systems without PAC
Documentation: arm64: describe asymmetric 32-bit support
arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores
arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0
arm64: Advertise CPUs capable of running 32-bit applications in sysfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull exit cleanups from Eric Biederman:
"In preparation of doing something about PTRACE_EVENT_EXIT I have
started cleaning up various pieces of code related to do_exit. Most of
that code I did not manage to get tested and reviewed before the merge
window opened but a handful of very useful cleanups are ready to be
merged.
The first change is simply the removal of the bdflush system call. The
code has now been disabled long enough that even the oldest userspace
working userspace setups anyone can find to test are fine with the
bdflush system call being removed.
Changing m68k fsp040_die to use force_sigsegv(SIGSEGV) instead of
calling do_exit directly is interesting only in that it is nearly the
most difficult of the incorrect uses of do_exit to remove.
The change to the seccomp code to simply send a signal instead of
calling do_coredump directly is a very nice little cleanup made
possible by realizing the existing signal sending helpers were missing
a little bit of functionality that is easy to provide"
* 'exit-cleanups-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal/seccomp: Dump core when there is only one live thread
signal/seccomp: Refactor seccomp signal and coredump generation
signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die
exit/bdflush: Remove the deprecated bdflush system call
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo si_trapno updates from Eric Biederman:
"The full set of si_trapno changes was not appropriate as a fix for the
newly added SIGTRAP TRAP_PERF, and so I postponed the rest of the
related cleanups.
This is the rest of the cleanups for si_trapno that reduces it from
being a really weird arch special case that is expect to be always
present (but isn't) on the architectures that support it to being yet
another field in the _sigfault union of struct siginfo.
The changes have been reviewed and marinated in linux-next. With the
removal of this awkward special case new code (like SIGTRAP TRAP_PERF)
that works across architectures should be easier to write and
maintain"
* 'siginfo-si_trapno-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Rename SIL_PERF_EVENT SIL_FAULT_PERF_EVENT for consistency
signal: Verify the alignment and size of siginfo_t
signal: Remove the generic __ARCH_SI_TRAPNO support
signal/alpha: si_trapno is only used with SIGFPE and SIGTRAP TRAP_UNK
signal/sparc: si_trapno is only used with SIGILL ILL_ILLTRP
arm64: Add compile-time asserts for siginfo_t offsets
arm: Add compile-time asserts for siginfo_t offsets
sparc64: Add compile-time asserts for siginfo_t offsets
|
|
During svm restore pages interrupt handler, kfd_process ref count was
never dropped when xnack was disabled. Therefore, the object was never
released.
Fixes: 2383f56bbe4a ("drm/amdkfd: page table restore through svm API")
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Add another device ID for JBL Quantum 800. It requires the same quirk as
other JBL Quantum devices.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210831002531.116957-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix lots of fallthrough warnings, e.g.:
arch/parisc/math-emu/fpudispatch.c:323:33: warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
- Support proper EV_MSC emissions to hid-apple (Vincent Lefevre)
|
