| Age | Commit message (Collapse) | Author |
|---|
|
Align all line continuations and (sub)section headers in a consistent
way.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
Since commit 0043ecea2399 ("vmlinux.lds.h: Adjust symbol ordering in
text output section"), the exception table in arch/openrisc/kernel/head.S
is no longer positioned at the very beginning of the kernel image, which
causes a boot failure.
Currently, the exception table resides in the regular .text section.
Previously, it was placed at the head by relying on the linker receiving
arch/openrisc/kernel/head.o as the first object. However, this behavior
has changed because sections like .text.{asan,unknown,unlikely,hot} now
precede the regular .text section.
The .head.text section is intended for entry points requiring special
placement. However, in OpenRISC, this section has been misused: instead
of the entry points, it contains boot code meant to be discarded after
booting. This feature is typically handled by the .init.text section.
This commit addresses the issue by replacing the current __HEAD marker
with __INIT and re-annotating the entry points with __HEAD. Additionally,
it adds __REF to entry.S to suppress the following modpost warning:
WARNING: modpost: vmlinux: section mismatch in reference: _tng_kernel_start+0x70 (section: .text) -> _start (section: .init.text)
Fixes: 0043ecea2399 ("vmlinux.lds.h: Adjust symbol ordering in text output section")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/5e032233-5b65-4ad5-ac50-d2eb6c00171c@roeck-us.net/#t
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rong Xu <xur@google.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
Koichiro Den says:
====================
virtio_net: correct netdev_tx_reset_queue() invocation points
When virtnet_close is followed by virtnet_open, some TX completions can
possibly remain unconsumed, until they are finally processed during the
first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash
[1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call
before RX napi enable") was not sufficient to eliminate all BQL crash
scenarios for virtio-net.
This issue can be reproduced with the latest net-next master by running:
`while :; do ip l set DEV down; ip l set DEV up; done` under heavy network
TX load from inside the machine.
This patch series resolves the issue and also addresses similar existing
problems:
(a). Drop netdev_tx_reset_queue() from open/close path. This eliminates the
BQL crashes due to the problematic open/close path.
(b). As a result of (a), netdev_tx_reset_queue() is now explicitly required
in freeze/restore path. Add netdev_tx_reset_queue() immediately after
free_unused_bufs() invocation.
(c). Fix missing resetting in virtnet_tx_resize().
virtnet_tx_resize() has lacked proper resetting since commit
c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits").
(d). Fix missing resetting in the XDP_SETUP_XSK_POOL path.
Similar to (c), this path lacked proper resetting. Call
netdev_tx_reset_queue() when virtqueue_reset() has actually recycled
unused buffers.
This patch series consists of six commits:
[1/6]: Resolves (a) and (b). # also -stable 6.11.y
[2/6]: Minor fix to make [4/6] streamlined.
[3/6]: Prerequisite for (c). # also -stable 6.11.y
[4/6]: Resolves (c) (incl. Prerequisite for (d)) # also -stable 6.11.y
[5/6]: Preresuisite for (d).
[6/6]: Resolves (d).
Changes for v4:
- move netdev_tx_reset_queue() out of free_unused_bufs()
- submit to net, not net-next
Changes for v3:
- replace 'flushed' argument with 'recycle_done'
Changes for v2:
- add tx queue resetting for (b) to (d) above
v3: https://lore.kernel.org/all/20241204050724.307544-1-koichiro.den@canonical.com/
v2: https://lore.kernel.org/all/20241203073025.67065-1-koichiro.den@canonical.com/
v1: https://lore.kernel.org/all/20241130181744.3772632-1-koichiro.den@canonical.com/
[1]:
------------[ cut here ]------------
kernel BUG at lib/dynamic_queue_limits.c:99!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2
Tainted: [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \
BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:dql_completed+0x26b/0x290
Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d
4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01
d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff
RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009
RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000
RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001
R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40
FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
<IRQ>
? die+0x32/0x80
? do_trap+0xd9/0x100
? dql_completed+0x26b/0x290
? dql_completed+0x26b/0x290
? do_error_trap+0x6d/0xb0
? dql_completed+0x26b/0x290
? exc_invalid_op+0x4c/0x60
? dql_completed+0x26b/0x290
? asm_exc_invalid_op+0x16/0x20
? dql_completed+0x26b/0x290
__free_old_xmit+0xff/0x170 [virtio_net]
free_old_xmit+0x54/0xc0 [virtio_net]
virtnet_poll+0xf4/0xe30 [virtio_net]
? __update_load_avg_cfs_rq+0x264/0x2d0
? update_curr+0x35/0x260
? reweight_entity+0x1be/0x260
__napi_poll.constprop.0+0x28/0x1c0
net_rx_action+0x329/0x420
? enqueue_hrtimer+0x35/0x90
? trace_hardirqs_on+0x1d/0x80
? kvm_sched_clock_read+0xd/0x20
? sched_clock+0xc/0x30
? kvm_sched_clock_read+0xd/0x20
? sched_clock+0xc/0x30
? sched_clock_cpu+0xd/0x1a0
handle_softirqs+0x138/0x3e0
do_softirq.part.0+0x89/0xc0
</IRQ>
<TASK>
__local_bh_enable_ip+0xa7/0xb0
virtnet_open+0xc8/0x310 [virtio_net]
__dev_open+0xfa/0x1b0
__dev_change_flags+0x1de/0x250
dev_change_flags+0x22/0x60
do_setlink.isra.0+0x2df/0x10b0
? rtnetlink_rcv_msg+0x34f/0x3f0
? netlink_rcv_skb+0x54/0x100
? netlink_unicast+0x23e/0x390
? netlink_sendmsg+0x21e/0x490
? ____sys_sendmsg+0x31b/0x350
? avc_has_perm_noaudit+0x67/0xf0
? cred_has_capability.isra.0+0x75/0x110
? __nla_validate_parse+0x5f/0xee0
? __pfx___probestub_irq_enable+0x3/0x10
? __create_object+0x5e/0x90
? security_capable+0x3b/0x7[I0
rtnl_newlink+0x784/0xaf0
? avc_has_perm_noaudit+0x67/0xf0
? cred_has_capability.isra.0+0x75/0x110
? stack_depot_save_flags+0x24/0x6d0
? __pfx_rtnl_newlink+0x10/0x10
rtnetlink_rcv_msg+0x34f/0x3f0
? do_syscall_64+0x6c/0x180
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
? __pfx_rtnetlink_rcv_msg+0x10/0x10
netlink_rcv_skb+0x54/0x100
netlink_unicast+0x23e/0x390
netlink_sendmsg+0x21e/0x490
____sys_sendmsg+0x31b/0x350
? copy_msghdr_from_user+0x6d/0xa0
___sys_sendmsg+0x86/0xd0
? __pte_offset_map+0x17/0x160
? preempt_count_add+0x69/0xa0
? __call_rcu_common.constprop.0+0x147/0x610
? preempt_count_add+0x69/0xa0
? preempt_count_add+0x69/0xa0
? _raw_spin_trylock+0x13/0x60
? trace_hardirqs_on+0x1d/0x80
__sys_sendmsg+0x66/0xc0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f41defe5b34
Code: 15 e1 12 0f 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00
f3 0f 1e fa 80 3d 35 95 0f 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55
RSP: 002b:00007ffe5336ecc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f41defe5b34
RDX: 0000000000000000 RSI: 00007ffe5336ed30 RDI: 0000000000000003
RBP: 00007ffe5336eda0 R08: 0000000000000010 R09: 0000000000000001
R10: 00007ffe5336f6f9 R11: 0000000000000202 R12: 0000000000000003
R13: 0000000067452259 R14: 0000556ccc28b040 R15: 0000000000000000
</TASK>
[...]
====================
Link: https://patch.msgid.link/20241206011047.923923-1-koichiro.den@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
virtnet_sq_bind_xsk_pool() flushes tx skbs and then resets tx queue, so
DQL counters need to be reset when flushing has actually occurred, Add
virtnet_sq_free_unused_buf_done() as a callback for virtqueue_resize()
to handle this.
Fixes: 21a4e3ce6dc7 ("virtio_net: xsk: bind/unbind xsk for tx")
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When virtqueue_reset() has actually recycled all unused buffers,
additional work may be required in some cases. Relying solely on its
return status is fragile, so introduce a new function argument
'recycle_done', which is invoked when it really occurs.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
virtnet_tx_resize() flushes remaining tx skbs, requiring DQL counters to
be reset when flushing has actually occurred. Add
virtnet_sq_free_unused_buf_done() as a callback for virtqueue_reset() to
handle this.
Fixes: c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits")
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When virtqueue_resize() has actually recycled all unused buffers,
additional work may be required in some cases. Relying solely on its
return status is fragile, so introduce a new function argument
'recycle_done', which is invoked when the recycle really occurs.
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
While not harmful, using vq2rxq where it's always sq appears odd.
Replace it with the more appropriate vq2txq for clarity and correctness.
Fixes: 89f86675cb03 ("virtio_net: xsk: tx: support xmit xsk buffer")
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When virtnet_close is followed by virtnet_open, some TX completions can
possibly remain unconsumed, until they are finally processed during the
first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash
[1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call
before RX napi enable") was not sufficient to eliminate all BQL crash
cases for virtio-net.
This issue can be reproduced with the latest net-next master by running:
`while :; do ip l set DEV down; ip l set DEV up; done` under heavy network
TX load from inside the machine.
netdev_tx_reset_queue() can actually be dropped from virtnet_open path;
the device is not stopped in any case. For BQL core part, it's just like
traffic nearly ceases to exist for some period. For stall detector added
to BQL, even if virtnet_close could somehow lead to some TX completions
delayed for long, followed by virtnet_open, we can just take it as stall
as mentioned in commit 6025b9135f7a ("net: dqs: add NIC stall detector
based on BQL"). Note also that users can still reset stall_max via sysfs.
So, drop netdev_tx_reset_queue() from virtnet_enable_queue_pair(). This
eliminates the BQL crashes. As a result, netdev_tx_reset_queue() is now
explicitly required in freeze/restore path. This patch adds it to
immediately after free_unused_bufs(), following the rule of thumb:
netdev_tx_reset_queue() should follow any SKB freeing not followed by
netdev_tx_completed_queue(). This seems the most consistent and
streamlined approach, and now netdev_tx_reset_queue() runs whenever
free_unused_bufs() is done.
[1]:
------------[ cut here ]------------
kernel BUG at lib/dynamic_queue_limits.c:99!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2
Tainted: [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \
BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:dql_completed+0x26b/0x290
Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d
4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01
d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff
RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009
RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000
RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001
R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40
FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
<IRQ>
? die+0x32/0x80
? do_trap+0xd9/0x100
? dql_completed+0x26b/0x290
? dql_completed+0x26b/0x290
? do_error_trap+0x6d/0xb0
? dql_completed+0x26b/0x290
? exc_invalid_op+0x4c/0x60
? dql_completed+0x26b/0x290
? asm_exc_invalid_op+0x16/0x20
? dql_completed+0x26b/0x290
__free_old_xmit+0xff/0x170 [virtio_net]
free_old_xmit+0x54/0xc0 [virtio_net]
virtnet_poll+0xf4/0xe30 [virtio_net]
? __update_load_avg_cfs_rq+0x264/0x2d0
? update_curr+0x35/0x260
? reweight_entity+0x1be/0x260
__napi_poll.constprop.0+0x28/0x1c0
net_rx_action+0x329/0x420
? enqueue_hrtimer+0x35/0x90
? trace_hardirqs_on+0x1d/0x80
? kvm_sched_clock_read+0xd/0x20
? sched_clock+0xc/0x30
? kvm_sched_clock_read+0xd/0x20
? sched_clock+0xc/0x30
? sched_clock_cpu+0xd/0x1a0
handle_softirqs+0x138/0x3e0
do_softirq.part.0+0x89/0xc0
</IRQ>
<TASK>
__local_bh_enable_ip+0xa7/0xb0
virtnet_open+0xc8/0x310 [virtio_net]
__dev_open+0xfa/0x1b0
__dev_change_flags+0x1de/0x250
dev_change_flags+0x22/0x60
do_setlink.isra.0+0x2df/0x10b0
? rtnetlink_rcv_msg+0x34f/0x3f0
? netlink_rcv_skb+0x54/0x100
? netlink_unicast+0x23e/0x390
? netlink_sendmsg+0x21e/0x490
? ____sys_sendmsg+0x31b/0x350
? avc_has_perm_noaudit+0x67/0xf0
? cred_has_capability.isra.0+0x75/0x110
? __nla_validate_parse+0x5f/0xee0
? __pfx___probestub_irq_enable+0x3/0x10
? __create_object+0x5e/0x90
? security_capable+0x3b/0x70
rtnl_newlink+0x784/0xaf0
? avc_has_perm_noaudit+0x67/0xf0
? cred_has_capability.isra.0+0x75/0x110
? stack_depot_save_flags+0x24/0x6d0
? __pfx_rtnl_newlink+0x10/0x10
rtnetlink_rcv_msg+0x34f/0x3f0
? do_syscall_64+0x6c/0x180
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
? __pfx_rtnetlink_rcv_msg+0x10/0x10
netlink_rcv_skb+0x54/0x100
netlink_unicast+0x23e/0x390
netlink_sendmsg+0x21e/0x490
____sys_sendmsg+0x31b/0x350
? copy_msghdr_from_user+0x6d/0xa0
___sys_sendmsg+0x86/0xd0
? __pte_offset_map+0x17/0x160
? preempt_count_add+0x69/0xa0
? __call_rcu_common.constprop.0+0x147/0x610
? preempt_count_add+0x69/0xa0
? preempt_count_add+0x69/0xa0
? _raw_spin_trylock+0x13/0x60
? trace_hardirqs_on+0x1d/0x80
__sys_sendmsg+0x66/0xc0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f41defe5b34
Code: 15 e1 12 0f 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00
f3 0f 1e fa 80 3d 35 95 0f 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55
RSP: 002b:00007ffe5336ecc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f41defe5b34
RDX: 0000000000000000 RSI: 00007ffe5336ed30 RDI: 0000000000000003
RBP: 00007ffe5336eda0 R08: 0000000000000010 R09: 0000000000000001
R10: 00007ffe5336f6f9 R11: 0000000000000202 R12: 0000000000000003
R13: 0000000067452259 R14: 0000556ccc28b040 R15: 0000000000000000
</TASK>
[...]
Fixes: c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits")
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
[ pabeni: trimmed possibly troublesome separator ]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Due to target variable is being reassigned in npc_install_flow()
function, PF multicast rules are not getting installed.
This patch addresses the issue by fixing the "IF" condition
checks when rules are installed by AF.
Fixes: 6c40ca957fe5 ("octeontx2-pf: Adds TC offload support").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241205113435.10601-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Stefan Wahren says:
====================
qca_spi: Fix SPI specific issues
This small series address two annoying SPI specific issues of
the qca_spi driver.
====================
Link: https://patch.msgid.link/20241206184643.123399-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The module parameter qcaspi_pluggable controls if QCA7000 signature
should be checked at driver probe (current default) or not. Unfortunately
this could fail in case the chip is temporary in reset, which isn't under
total control by the Linux host. So disable this check per default
in order to avoid unexpected probe failures.
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241206184643.123399-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Storing the maximum clock speed in module parameter qcaspi_clkspeed
has the unintended side effect that the first probed instance
defines the value for all other instances. Fix this issue by storing
it in max_speed_hz of the relevant SPI device.
This fix keeps the priority of the speed parameter (module parameter,
device tree property, driver default). Btw this uses the opportunity
to get the rid of the unused member clkspeed.
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241206184643.123399-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
t4_set_vf_mac_acl() uses pf to set mac addr, but t4vf_get_vf_mac_acl()
uses port number to get mac addr, this leads to error when an attempt
to set MAC address on VF's of PF2 and PF3.
This patch fixes the issue by using port number to set mac address.
Fixes: e0cdac65ba26 ("cxgb4vf: configure ports accessible by the VF")
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241206062014.49414-1-anumula@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The temp directory is made and a known fake hwmon PMU created within
it. Prior to this fix the events were being incorrectly written to the
temp directory rather than the fake PMU directory. This didn't impact
the test as the directory fd matched the wrong location, but it
doesn't mirror what a hwmon PMU would actually look like.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20241206042306.1055913-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The hwmon PMU test will make a temp directory, open the directory with
O_DIRECTORY then fill it with contents. As the open is before the
filling the contents the later fdopendir may reflect the initial empty
state, meaning no events are seen. Change to re-open the directory,
rather than dup the fd, so the latest contents are seen.
Minor tweaks/additions to debug messages.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20241206042306.1055913-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The comparison function cmp_profile_data() violates the C standard's
requirements for qsort() comparison functions, which mandate symmetry
and transitivity:
* Symmetry: If x < y, then y > x.
* Transitivity: If x < y and y < z, then x < z.
When v1 and v2 are equal, the function incorrectly returns 1, breaking
symmetry and transitivity. This causes undefined behavior, which can
lead to memory corruption in certain versions of glibc [1].
Fix the issue by returning 0 when v1 and v2 are equal, ensuring
compliance with the C standard and preventing undefined behavior.
Link: https://www.qualys.com/2024/01/30/qsort.txt [1]
Fixes: 0f223813edd0 ("perf ftrace: Add 'profile' command")
Fixes: 74ae366c37b7 ("perf ftrace profile: Add -s/--sort option")
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: jserv@ccns.ncku.edu.tw
Cc: chuang@cs.nycu.edu.tw
Link: https://lore.kernel.org/r/20241209134226.1939163-1-visitorckw@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The temp directory is made and a known fake hwmon PMU created within
it. Prior to this fix the events were being incorrectly written to the
temp directory rather than the fake PMU directory. This didn't impact
the test as the directory fd matched the wrong location, but it
doesn't mirror what a hwmon PMU would actually look like.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206042306.1055913-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The hwmon PMU test will make a temp directory, open the directory with
O_DIRECTORY then fill it with contents. As the open is before the
filling the contents the later fdopendir may reflect the initial empty
state, meaning no events are seen. Change to re-open the directory,
rather than dup the fd, so the latest contents are seen.
Minor tweaks/additions to debug messages.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206042306.1055913-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Tracepoint parsing required libtraceevent but no longer does. Remove
the Build logic and #ifdefs that caused the tests not to be run. Test
code that directly uses libtraceevent is still guarded.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Switch from reading the tracepoint format to reading the id directly for
the evsel config. This avoids the need to initialize libtraceevent,
plugins, etc. It is sufficient for many tracepoint commands to work
like:
$ perf stat -e sched:sched_switch true
To populate evsel->tp_format, do lazy initialization using libtraceevent
in the evsel__tp_format function (the sys and name are saved in
evsel__newtp_idx for this purpose).
Reading the id should be indicative of the format failing to load, but
if not an error is reported in evsel__tp_format. This could happen for a
tracepoint with a format that fails to parse.
As tracepoints can be parsed without libtraceevent with this, remove the
associated #ifdefs in parse-events.c.
By only lazily parsing the tracepoint format information it is hoped
this will help improve the performance of code using tracepoints but not
the format information. It also cuts down on the build and ifdef logic.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add an accessor function for tp_format. Rather than search+replace
uses try to use a variable and reuse it. Add additional NULL checks
when accessing/using the value. Make sure the PTR_ERR is nulled out on
error path in evsel__newtp_idx.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
trace-event-info.c has no libtraceevent dependencies, always build it
and use it in builtin-record and perf_event_attr printing.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Capture that these functions don't mutate their input.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Switch from returning -1 to -errno so that callers can determine types
of failure.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
get_core_id returns 0 on success and a negative errno value on error.
Currently the error can only be -1, but fixing this to be any errno
value breaks perf:
https://lore.kernel.org/lkml/Zzu4Sdebve-NXEMX@google.com/
To avoid this, make sure all error values are written as -1.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241118225345.889810-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
By introducing a tools/perf/util/btf.c to collect utilities not yet
available via libbpf, the first being a way to find a member by name
once we get the type_id for the struct.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Instead of growing the array by 2048, grow by the larger of the current
range or 16.
As ranges are typical for things like the online CPUs this will mean a
single allocation happens.
While uncore CPU maps will grow 16 at a time which is a value that is
generous except say on large servers.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Function is no longer used and duplicates the parsing logic from
perf_cpu_map__new().
Remove to allow simplification.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-8-irogers@google.com
[ Applied manually to cope with "libperf cpumap: Refactor perf_cpu_map__merge()" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Remove use of a FILE and switch to reading a string that is then
passed to perf_cpu_map__new().
Being able to remove perf_cpu_map__read() avoids duplicated parsing
logic.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Remove use of a FILE and switch to reading a string that is then
passed to perf_cpu_map__new().
Being able to remove perf_cpu_map__read() avoids duplicated parsing logic.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
File cpumasks often have a newline that shouldn't trigger the invalid
parsing case in perf_cpu_map__new().
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Avoid redefinition of MAX_NR_CPUS as a global constant, the original
definition is tools/perf/perf.h.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
libperf exposes MAX_NR_CPUS via tools/lib/perf/include/internal/cpumap.h
which is internal.
The preferred dependency should be the definition in tools/perf/perf.h.
Add the includes of perf.h so that MAX_NR_CPUS can be hidden in libperf.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Systems have surpassed 2048 CPUs. Increase MAX_NR_CPUS to 4096.
Bitmaps declared with MAX_NR_CPUS bits will increase from 256B to 512B,
cpus_runtime will increase from 81960B to 163880B, and max_entries will
increase from 8192B to 16384B.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Decode SPE Data Source packets on AmpereOne. The field is IMPDEF.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20241108202946.16835-3-ilkka@os.amperecomputing.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
other cores
Split Data Source Packet handling to prepare adding support for
other implementations.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20241108202946.16835-2-ilkka@os.amperecomputing.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For the CPU map merging test, add an extra check for the reference
counter before releasing the last CPU map.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241107125308.41226-4-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add additional tests for CPU map merging to cover more cases.
These tests include different types of arguments, such as when one CPU
map is a subset of another, as well as cases with or without overlap
between the two maps.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241107125308.41226-3-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The perf_cpu_map__merge() function has two arguments, 'orig' and
'other'. The function definition might cause confusion as it could give
the impression that the CPU maps in the two arguments are copied into a
new allocated structure, which is then returned as the result.
The purpose of the function is to merge the CPU map 'other' into the CPU
map 'orig'. This commit changes the 'orig' argument to a pointer to
pointer, so the new result will be updated into 'orig'.
The return value is changed to an int type, as an error number or 0 for
success.
Update callers and tests for the new function definition.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241107125308.41226-2-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Just a trivial typo, should be 'can', did a spell check on the rest of
the file just in case, nothing more stood out.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Previously system RAM and persistent memory were hard code matched,
change so that the label of the memory region is just read from
/proc/iomem. This avoids frequent N/A samples.
Change the /proc/iomem reading, event processing and output so that
nested entries appear and their counts count toward their parent. As
labels may be repeated, include the memory ranges in the output to make
it clear why, for example, "System RAM" appears twice.
Before:
Event: mem_inst_retired.all_loads:P
Memory type count percentage
---------------------------------------- ---------- ----------
System RAM 9460 96.5%
N/A 998 3.5%
After:
Event: mem_inst_retired.all_loads:P
Memory type count percentage
---------------------------------------- ---------- ----------
100000000-105f7fffff : System RAM 36741 96.5
841400000-8416599ff : Kernel data 89 0.2
840800000-8412a6fff : Kernel rodata 60 0.2
841ebe000-8423fffff : Kernel bss 34 0.1
0-fff : Reserved 1345 3.5
100000-89dd9fff : System RAM 2 0.0
Before:
Event: mem_inst_retired.any:P
Memory type count percentage
---------------------------------------- ----------- -----------
System RAM 9460 90.5%
N/A 998 9.5%
After:
Event: mem_inst_retired.any:P
Memory type count percentage
---------------------------------------- ---------- ----------
100000000-105f7fffff : System RAM 9460 90.5
841400000-8416599ff : Kernel data 45 0.4
840800000-8412a6fff : Kernel rodata 19 0.2
841ebe000-8423fffff : Kernel bss 12 0.1
0-fff : Reserved 998 9.5
The code has been updated to python 3 with type hints and resolving
issues reported by mypy and pylint. Tabs are swapped to spaces as
preferred in PEP8, because most lines of code were modified (of this
small file) and this makes pylint significantly less noisy.
Committer testing:
root@number:/tmp# grep -m1 "model name" /proc/cpuinfo
model name : Intel(R) Core(TM) i7-14700K
root@number:/tmp#
root@number:/tmp# perf script mem-phys-addr -a find /
/bin
/lib
/lib64
/sbin
Warning:
744 out of order events recorded.
Event: cpu_core/mem_inst_retired.all_loads/P
Memory type count percentage
---------------------------------------- ---------- ----------
100000000-8bfbfffff : System RAM 364561 76.5
621400000-6223a6fff : Kernel rodata 10474 2.2
622400000-62283d4bf : Kernel data 4828 1.0
623304000-6237fffff : Kernel bss 1063 0.2
620000000-6213fffff : Kernel code 98 0.0
0-fff : Reserved 111480 23.4
100000-2b0ca017 : System RAM 337 0.1
2fbad000-30d92fff : System RAM 44 0.0
2c79d000-2fbabfff : System RAM 30 0.0
30d94000-316d5fff : System RAM 16 0.0
2b131a58-2c71dfff : System RAM 7 0.0
root@number:/tmp#
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119180130.19160-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Before:
⬢ [acme@toolbox a]$ perf annotate --stdio2 -i acme-perf-injected.data 'java.lang.String com.fasterxml.jackson.core.sym.CharsToNameCanonicalizer.findSymbol(char[], int, int, int)'
Error:
Couldn't annotate java.lang.String com.fasterxml.jackson.core.sym.CharsToNameCanonicalizer.findSymbol(char[], int, int, int):
Internal error: Invalid -1 error code
⬢ [acme@toolbox a]$
After:
⬢ [acme@toolbox a]$ perf annotate --stdio2 -i acme-perf-injected.data 'java.lang.String com.fasterxml.jackson.core.sym.CharsToNameCanonicalizer.findSymbol(char[], int, int, int)'
Error:
Couldn't annotate java.lang.String com.fasterxml.jackson.core.sym.CharsToNameCanonicalizer.findSymbol(char[], int, int, int):
Couldn't determine the file /tmp/perf-3308868.map type.
⬢ [acme@toolbox a]$
Reported-by: Francesco Nigro <fnigro@redhat.com>
Reported-by: Ilan Green <igreen@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Link: https://lore.kernel.org/lkml/Z092D9-r_iOgwIWM@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since 13e17c9ff49119aa ("perf build: Make libunwind opt-in rather than
opt-out"), so we shouldn't by default be testing for its availability at
build time in tools/build/features/test-all.c.
That test was designed to test the features we expect to be the most
common ones in most builds, so if we test build just that file, then we
assume the features there are present and will not test one by one.
Removing it from test-all.c gets rid of the first impediment for
test-all.c to build successfully:
$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
In file included from test-all.c:62:
test-libunwind.c:2:10: fatal error: libunwind.h: No such file or directory
2 | #include <libunwind.h>
| ^~~~~~~~~~~~~
compilation terminated.
$
We then get to:
$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
/usr/bin/ld: cannot find -lunwind-x86_64: No such file or directory
/usr/bin/ld: cannot find -lunwind: No such file or directory
collect2: error: ld returned 1 exit status
$
So make all the logic related to setting CFLAGS, LDFLAGS, etc for
libunwind to be conditional on NO_LIBWUNWIND=1, which is now the
default, now we get a faster build:
$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
$ ldd /tmp/build/perf-tools-next/feature/test-all.bin
linux-vdso.so.1 (0x00007fef04cde000)
libdw.so.1 => /lib64/libdw.so.1 (0x00007fef04a49000)
libpython3.12.so.1.0 => /lib64/libpython3.12.so.1.0 (0x00007fef04478000)
libm.so.6 => /lib64/libm.so.6 (0x00007fef04394000)
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007fef0436c000)
libtracefs.so.1 => /lib64/libtracefs.so.1 (0x00007fef04345000)
libcrypto.so.3 => /lib64/libcrypto.so.3 (0x00007fef03e95000)
libz.so.1 => /lib64/libz.so.1 (0x00007fef03e72000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007fef03e56000)
libnuma.so.1 => /lib64/libnuma.so.1 (0x00007fef03e48000)
libslang.so.2 => /lib64/libslang.so.2 (0x00007fef03b65000)
libperl.so.5.38 => /lib64/libperl.so.5.38 (0x00007fef037c6000)
libc.so.6 => /lib64/libc.so.6 (0x00007fef035d5000)
liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fef035a0000)
libzstd.so.1 => /lib64/libzstd.so.1 (0x00007fef034e1000)
libbz2.so.1 => /lib64/libbz2.so.1 (0x00007fef034cd000)
/lib64/ld-linux-x86-64.so.2 (0x00007fef04ce0000)
libcrypt.so.2 => /lib64/libcrypt.so.2 (0x00007fef03495000)
$
Fixes: 13e17c9ff49119aa ("perf build: Make libunwind opt-in rather than opt-out")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Z09zTztD8X8qIWCX@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Remove if_not_guard() as it is generating incorrect code
- Fix the initialization of the fake lockdep_map for the first locked
ww_mutex
* tag 'locking_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
headers/cleanup.h: Remove the if_not_guard() facility
locking/ww_mutex: Fix ww_mutex dummy lockdep map selftest warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Make sure the PEBS buffer is drained before reconfiguring the
hardware
- Add Arrow Lake U support
* tag 'perf_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Unconditionally drain PEBS DS when changing PEBS_DATA_CFG
perf/x86/intel: Add Arrow Lake U support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Remove wrong enqueueing of a task for a later wakeup when a task
blocks on a RT mutex
- Do not setup a new deadline entity on a boosted task as that has
happened already
- Update preempt= kernel command line param
- Prevent needless softirqd wakeups in the idle task's context
- Detect the case where the idle load balancer CPU becomes busy and
avoid unnecessary load balancing invocation
- Remove an unnecessary load balancing need_resched() call in
nohz_csd_func()
- Allow for raising of SCHED_SOFTIRQ softirq type on RT but retain the
warning to catch any other cases
- Remove a wrong warning when a cpuset update makes the task affinity
no longer a subset of the cpuset
* tag 'sched_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: rtmutex: Fix wake_q logic in task_blocks_on_rt_mutex
sched/deadline: Fix warning in migrate_enable for boosted tasks
sched/core: Update kernel boot parameters for LAZY preempt.
sched/core: Prevent wakeup of ksoftirqd during idle load balance
sched/fair: Check idle_cpu() before need_resched() to detect ilb CPU turning busy
sched/core: Remove the unnecessary need_resched() check in nohz_csd_func()
softirq: Allow raising SCHED_SOFTIRQ from SMP-call-function on RT kernel
sched: fix warning in sched_setaffinity
sched/deadline: Fix replenish_dl_new_period dl_server condition
|
|
Build 6.13-rc12 for x86_64 with gcc 14.2.1 fails with the error:
ld: vmlinux.o: in function `virtual_mapped':
linux/arch/x86/kernel/relocate_kernel_64.S:249:(.text+0x5915b): undefined reference to `saved_context_gdt_desc'
when CONFIG_KEXEC_JUMP is enabled.
This was introduced by commit 07fa619f2a40 ("x86/kexec: Restore GDT on
return from ::preserve_context kexec") which introduced a use of
saved_context_gdt_desc without a declaration for it.
Fix that by including asm/asm-offsets.h where saved_context_gdt_desc
is defined (indirectly in include/generated/asm-offsets.h which
asm/asm-offsets.h includes).
Fixes: 07fa619f2a40 ("x86/kexec: Restore GDT on return from ::preserve_context kexec")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Closes: https://lore.kernel.org/oe-kbuild-all/202411270006.ZyyzpYf8-lkp@intel.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The powerpc user access code is special, and unlike other architectures
distinguishes between user access for reading and writing.
And commit 43a43faf5376 ("futex: improve user space accesses") messed
that up. It went undetected elsewhere, but caused ppc32 to fail early
during boot, because the user access had been started with
user_read_access_begin(), but then finished off with just a plain
"user_access_end()".
Note that the address-masking user access helpers don't even have that
read-vs-write distinction, so if powerpc ever wants to do address
masking tricks, we'll have to do some extra work for it.
[ Make sure to also do it for the EFAULT case, as pointed out by
Christophe Leroy ]
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/87bjxl6b0i.fsf@igel.home/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Daniel Machon says:
====================
net: sparx5: misc fixes for sparx5 and lan969x
This series fixes various issues in the Sparx5 and lan969x drivers. Most
of the fixes are for new issues introduced by the recent series adding
lan969x switch support in the Sparx5 driver.
Most notable is patch 1/5 that moves the lan969x dir into the sparx5
dir, in order to address a cyclic dependency issue reported by depmod,
when installing modules. Details are in the commit descriptions.
To: Andrew Lunn <andrew+netdev@lunn.ch>
To: David S. Miller <davem@davemloft.net>
To: Eric Dumazet <edumazet@google.com>
To: Jakub Kicinski <kuba@kernel.org>
To: Paolo Abeni <pabeni@redhat.com>
To: Lars Povlsen <lars.povlsen@microchip.com>
To: Steen Hegelund <Steen.Hegelund@microchip.com>
To: UNGLinuxDriver@microchip.com
To: Richard Cochran <richardcochran@gmail.com>
To: Bjarni Jonasson <bjarni.jonasson@microchip.com>
To: jensemil.schulzostergaard@microchip.com
To: horatiu.vultur@microchip.com
To: arnd@arndb.de
To: jacob.e.keller@intel.com
To: Parthiban.Veerasooran@microchip.com
Cc: Calvin Owens <calvin@wbinvd.org>
Cc: Muhammad Usama Anjum <Usama.Anjum@collabora.com>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
====================
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
