summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-02usb: dwc3: ep0: implement support for Set Isoch Delay requestFelipe Balbi
This is basically a noop for DWC3. We don't have to do anything. Basically we test if the request parameters are correct, cache the Isochronous Delay and return success. Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-02usb: dwc3: gadget: increase setup buffer sizeFelipe Balbi
We want to re-use that buffer for other USB requests, so let's increase it to biggest wMaxPacketSize for ep0 so it works for everything we have in mind. Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-02usb: dwc3: ep0: implement Set SEL supportFelipe Balbi
This patch implements Set SEL Standard Request support for dwc3 driver. It needs to issue a command to the controller passing the timing we received on the data phase of the Set SEL request. Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-02usb: dwc3: gadget: implement Global Command supportFelipe Balbi
This will be used by the ep0 layer for implementing Set SEL Standard Request. Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-01USB: yurex.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: uss720.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: usblcd.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Zack Parsons <k3bacon@gmail.com> CC: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: rio500.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Cesar Miquel <miquel@df.uba.ar> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: idmouse.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: appledisplay.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Andrew Morton <akpm@linux-foundation.org> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Mike Frysinger <vapier@gentoo.org> CC: Arun Sharma <asharma@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: mdc800.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: r8a66597-hcd.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> CC: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> CC: Tobias Klauser <tklauser@distanz.ch> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: oxu210hp-hcd.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Rusty Russell <rusty@rustcorp.com.au> CC: David Howells <dhowells@redhat.com> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: ohci-sa1111.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: ohci-ep93xx.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Alan Stern <stern@rowland.harvard.edu> CC: Lennert Buytenhek <kernel@wantstofly.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: ohci-dbg.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: ehci-sched.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: ehci-q.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: file.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: usblp.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: xusbatm.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: usbatm.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Duncan Sands <duncan.sands@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: speedtch.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Duncan Sands <duncan.sands@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: cxacru.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Simon Arlott <cxacru@fire.lp0.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: usbtouchscreen.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Henrik Rydberg <rydberg@euromail.se> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Viresh Kumar <viresh.kumar@st.com> CC: Armando Visconti <armando.visconti@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: kbtab.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: gtco.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: aiptek.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Jesper Juhl <jj@chaosbits.net> CC: JJ Ding <dgdunix@gmail.com> CC: Edwin van Vliet <edwin@cheatah.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: acecad.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: bcm5974.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Henrik Rydberg <rydberg@euromail.se> CC: Alessandro Rubini <rubini@ipvvis.unipv.it> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: appletouch.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Alessandro Rubini <rubini@ipvvis.unipv.it> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: yealink.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Henk Vergonet <Henk.Vergonet@gmail.com> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: powermate.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: xpad.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: "Magnus Hörlin" <magnus@alefors.se> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: hid-core.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: iforce: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: wacom: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ping Cheng <pingc@wacom.com> Cc: Eduard Hasenleithner <eduard@hasenleithner.at> Cc: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01cifs: add missing initialization of server->req_lockJeff Layton
Cc: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-01cifs: don't cap ra_pages at the same level as default_backing_dev_infoJeff Layton
While testing, I've found that even when we are able to negotiate a much larger rsize with the server, on-the-wire reads often end up being capped at 128k because of ra_pages being capped at that level. Lifting this restriction gave almost a twofold increase in sequential read performance on my craptactular KVM test rig with a 1M rsize. I think this is safe since the actual ra_pages that the VM requests is run through max_sane_readahead() prior to submitting the I/O. Under memory pressure we should end up with large readahead requests being suppressed anyway. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-01CIFS: Fix indentation in cifs_show_optionsSachin Prabhu
Trivial patch which fixes a misplaced tab in cifs_show_options(). Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-01Merge tag 'ktest-for-v3.4-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull two bug fixes in ktest from Steven Rostedt. * tag 'ktest-for-v3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Fix reboot on success stopping all reboots ktest.pl: Fix combined usage of BISECT_REVERSE and BISECT_SKIP
2012-05-01USB: input: usbtouchscreen.c: fix up dev_err() usageGreg Kroah-Hartman
We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Henrik Rydberg <rydberg@euromail.se> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Viresh Kumar <viresh.kumar@st.com> CC: Armando Visconti <armando.visconti@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: input: wacom_sys.c: fix up dev_err() usageGreg Kroah-Hartman
We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Ping Cheng <pingc@wacom.com> CC: Chris Bagwell <chris@cnpbagwell.com> CC: Eduard Hasenleithner <eduard@hasenleithner.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: input: kbtab.c: fix up dev_err() usageGreg Kroah-Hartman
We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: input: gtco.c: fix up dev_err() usageGreg Kroah-Hartman
We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: input: aiptek.c: fix up dev_err() usageGreg Kroah-Hartman
We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Jesper Juhl <jj@chaosbits.net> CC: JJ Ding <dgdunix@gmail.com> CC: Edwin van Vliet <edwin@cheatah.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: input: acecad.c: fix up dev_err() usageGreg Kroah-Hartman
We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: input: bcm5974.c: fix up dev_err() usageGreg Kroah-Hartman
We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Henrik Rydberg <rydberg@euromail.se> CC: Alessandro Rubini <rubini@ipvvis.unipv.it> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: input: appletouch.c: fix up dev_err() usageGreg Kroah-Hartman
We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Alessandro Rubini <rubini@ipvvis.unipv.it> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: input: yealink.c: fix up dev_err() usageGreg Kroah-Hartman
We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Henk Vergonet <Henk.Vergonet@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-15 18:48:35 +0000