| Age | Commit message (Collapse) | Author |
|---|
|
The Vocaster Two has a Bluetooth module with a volume control. Add a
corresponding ALSA mixer control.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <b78687f7243142a4466f63c0aee9742b44ee395d.1710264833.git.g@b4.vu>
|
|
The Scarlett 4th Gen and Vocaster interfaces allow the autogain target
dBFS value(s) to be configured. Add Mean and Peak Target controls for
4th Gen, and a Hot Target control for Vocaster.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <33d7f6dc965ab09522361ec99745a0685e4b8272.1710264833.git.g@b4.vu>
|
|
Add Focusrite Vocaster One and Two USB IDs, notification arrays,
config sets, and device info data.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <5fb48555a8db7bb322b25784b165829357cd6e42.1710264833.git.g@b4.vu>
|
|
Add filter and compressor DSP controls for the Vocaster interfaces.
Mark scarlett2_notify_input_dsp() as __always_unused until it gets
used when the Vocaster callback function array is added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <a45316f79600b862dae38da24f13def638b06476.1710264833.git.g@b4.vu>
|
|
Add controls for the input mute switches that the Vocaster interfaces
have. Mark scarlett2_notify_input_mute() as __always_unused until it
gets used when the Vocaster callback function array is added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <3b384b4e759241bd06f0c223e9f4f00467d88318.1710264833.git.g@b4.vu>
|
|
The autogain status texts are different for Vocaster vs. Scarlett 4th
Gen, so make them configurable per-config-set.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <b1adcd3dc48117d4ebe16812eeb7f1dbf1ede472.1710264833.git.g@b4.vu>
|
|
Remove the #define SCARLETT2_MAX_GAIN_DB and replace with a
per-config-set TLV as the Vocaster has a maximum gain of 70dB vs the
4th Gen 69dB.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <ade8e18ce38927ea0224946ec7cfea23ad3793d8.1710264833.git.g@b4.vu>
|
|
The 4th Gen Scarlett interfaces added software-controllable input gain
along with channel select, channel link, auto-gain, and "safe" mode.
Vocaster has software-controllable input gain and auto-gain but not
channel select, channel link, or safe mode.
Add a device info field safe_input_count to indicate how many channels
have a safe mode control, and use the presence of the input select and
input link switch configuration parameters to determine if those
controls should be created.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <167f04a37d0fb23f3077705df835adbc4f2b6a8e.1710264833.git.g@b4.vu>
|
|
Update scarlett2_usb_get_config() to support 32-bit values which are
needed by the upcoming Vocaster support.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <ee35dce0172b2aa3fec8163ab8f35bdc35a141bd.1710264833.git.g@b4.vu>
|
|
scarlett2_usb_set_config() was using size = 0 as a signal to use the
parameter buffer. Replace that with an explicit indication (pbuf = 1),
as the upcoming Vocaster support has a config item written via the
parameter buffer with size = 1 rather than the implicit size of 8.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <50a7d85bb04f9a7f13f667c70a706826c8d3ef93.1710264833.git.g@b4.vu>
|
|
The location pointed to by gen4_write_addr and gen4_write_addr + 1 is
officially known as the parameter buffer. Update the code to match.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <aa36ecb8d3ce67387b5edf6c900f0b8a509241ce.1710264833.git.g@b4.vu>
|
|
Add hwdep read op so flash segments can be read.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <800d20a801e8c59c2905c82ecae5676cd4f31429.1710264833.git.g@b4.vu>
|
|
After scarlett2_usb() sends a command, it seems that we should wait
for an ACK before attempting to read the response. Not doing that
didn't seem necessary previously but seems to be causing occasional
issues with 4th Gen devices.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <452d1263c40fa8eba1cfb24e2055e40a84cbc437.1710264833.git.g@b4.vu>
|
|
So that more forward declarations won't be required when we add
handling of the ACK notification, move the initialisation functions to
after the notification functions.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <0922071cb8be99a2394705de27b917d1e4e46f3f.1710264833.git.g@b4.vu>
|
|
The patch which fixed the missing remove_late() calls missed a case
when sof_select_ipc_and_paths() could return with error and in this
case sof_init_environment() would just return with 0.
Do not ignore the error code returned by sof_select_ipc_and_paths().
Fixes: 90f8917e7a15 ("ASoC: SOF: Core: Add remove_late() to sof_init_environment failure path")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240417075804.10829-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add vendor clear control register in readable register's
callback function. This prevents an access failure reported
in Intel CI tests.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Closes: https://github.com/thesofproject/linux/issues/4860
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/6a103ce9134d49d8b3941172c87a7bd4@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, all ASoC systems are set to use VPMON for DSP1RX5_SRC,
however, this is required only for internal boost systems.
External boost systems require VBSTMON instead of VPMON to be the
input to DSP1RX5_SRC.
Shared Boost Active acts like Internal boost (requires VPMON).
Shared Boost Passive acts like External boost (requires VBSTMON)
All systems require DSP1RX6_SRC to be set to VBSTMON.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240411142648.650921-1-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This chain fixes some problems with some previous patches for handling
the ASP1 config registers. The root of the problem is that the ownership
of these registers can be either with the firmware or the driver, and that
the chip has to be soft-reset after downloading the firmware.
This chain adds and uses a regmap_read_bypassed() function so that the
driver can leave the regmap in cache-only until the chip has rebooted,
but still poll a register to detect when the chip has rebooted.
Richard Fitzgerald (4):
regmap: Add regmap_read_bypassed()
ALSA: hda: cs35l56: Exit cache-only after
cs35l56_wait_for_firmware_boot()
ASoC: cs35l56: Fix unintended bus access while resetting amp
ASoC: cs35l56: Prevent overwriting firmware ASP config
drivers/base/regmap/regmap.c | 37 ++++++++++++++
include/linux/regmap.h | 8 +++
include/sound/cs35l56.h | 2 +
sound/pci/hda/cs35l56_hda.c | 4 ++
sound/soc/codecs/cs35l56-sdw.c | 2 -
sound/soc/codecs/cs35l56-shared.c | 83 ++++++++++++++++++++-----------
sound/soc/codecs/cs35l56.c | 26 +++++++++-
7 files changed, 130 insertions(+), 32 deletions(-)
--
2.39.2
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The current code will reset the ChainDMA on release unconditionally which
can result the following error when the CHainDMA is not allocated:
ipc tx : 0xe040000|0x0: GLB_CHAIN_DMA
ipc tx reply: 0x2e000007|0x0: GLB_CHAIN_DMA
FW reported error: 7 - Unsupported operation requested
ipc error for msg 0xe040000|0x0
sof_pcm_stream_free: pcm_ops hw_free failed -22
Background:
Pulseaudio and Pipewire on startup opens all available streams and
closes them without triggering a start (after probing it's capabilities).
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
We somehow missed the default path for DSP libraries for LNL, and need
to restrict support for D0i3 w/ IPC4. Also add debugfs support for
firmware profile information so that sof-test scripts can show what is
being tested.
|
|
Add vrefo settings to fix jd and headset mic recording issue.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://msgid.link/r/727219ed45d3485ba8f4646700aaa8a8@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Channel numbers of dmic supports 4 channels, modify channels_max
regarding to this issue.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://msgid.link/r/6a9b1d1fb2ea4f04b2157799f04053b1@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add an optional gpio property to control external CBJ circuits
to avoid some electric noise caused by sleeve/ring2 contacts floating.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://msgid.link/r/20240408091057.14165-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The codec leaves tie combo jack's sleeve/ring2 to floating status
default. It would cause electric noise while connecting the active
speaker jack during boot or shutdown.
This patch requests a gpio to control the additional jack circuit
to tie the contacts to the ground or floating.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds microphone detection for the Acer 315-24p, after which a microphone appears on the device and starts working
Signed-off-by: end.to.start <end.to.start@mail.ru>
Link: https://msgid.link/r/20240408152454.45532-1-end.to.start@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SOF driver has multiple profiles to select firmware/topology
prefix/names depending on the platform and ipc_type, and each of those
fields can be overridden with kernel parameters. This results in some
cases in confusion on what configuration is actually used in a given
test.
We currently log the firmware and topology names in the kernel logs,
but there's been an ask to add the information in debugfs to simplify
test scripts used by developers and CI.
This isn't meant to be a stable ABI used by apps, changes will be
allowed as needed.
Closes: https://github.com/thesofproject/linux/issues/3867
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240408194147.28919-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce a new field in struct sof_ipc_pcm_ops that can be used to
restrict DSP D0i3 during S0ix suspend to IPC3. With IPC4, all streams
must be stopped before S0ix suspend.
Reviewed-by: Uday M Bhat <uday.m.bhat@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240408194147.28919-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The commit cd6f2a2e6346 ("ASoC: SOF: Intel: Set the default firmware
library path for IPC4") added the default_lib_path field for all
platforms, but this was missed when LunarLake was later introduced.
Fixes: 64a63d9914a5 ("ASoC: SOF: Intel: LNL: Add support for Lunarlake platform")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240408194147.28919-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ChainDMA operation differs from normal pipelines that it is only
created when the stream started, in fact a PCM using ChainDMA has no
pipelines, modules.
To reset a ChainDMA, it needs to be first allocated in firmware. When
PulseAudio/PipeWire starts, they will probe the PCMs by opening them, check
hw_params and then close the PCM without starting audio.
Unconditionally resetting the ChainDMA can result the following error:
ipc tx : 0xe040000|0x0: GLB_CHAIN_DMA
ipc tx reply: 0x2e000007|0x0: GLB_CHAIN_DMA
FW reported error: 7 - Unsupported operation requested
ipc error for msg 0xe040000|0x0
sof_pcm_stream_free: pcm_ops hw_free failed -22
Add a new chain_dma_allocated flag to sof_ipc4_pcm_stream_priv to store the
ChainDMA allocation state and use this flag to skip sending the reset if
the ChainDMA is not allocated.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240409110036.9411-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Using the sof_ipc4_timestamp_info struct directly as sps->private data
is too restrictive, add a new generic sof_ipc4_pcm_stream_priv struct
containing the time_info to allow new information to be stored in a
generic way.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240409110036.9411-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The pointer to sof_ipc4_timestamp_info named most of the time as
'time_info' only to be named as 'stream_info' or 'info' in two function.
Use the consistent name of 'time_info' throughout the file.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240409110036.9411-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Throughout the file the pointer for snd_sof_pcm_stream is named either
'stream' or (wrongly) 'spcm' which confuses the reader.
Use 'sps' for the pointer name as it is the most common name used in SOF
codebase.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240409110036.9411-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Only populate the ASP1 config registers in the regmap cache if the
ASP DAI is used. This prevents regcache_sync() from overwriting
these registers with their defaults when the firmware owns
control of these registers.
On a SoundWire system the ASP could be owned by the firmware to
share reference audio with the firmware on other cs35l56. Or it
can be used as a normal codec-codec interface owned by the driver.
The driver must not overwrite the registers if the firmware has
control of them.
The original implementation for this in commit 07f7d6e7a124
("ASoC: cs35l56: Fix for initializing ASP1 mixer registers") was
to still provide defaults for these registers, assuming that if
they were never reconfigured from defaults then regcache_sync()
would not write them out because they are not dirty. Unfortunately
regcache_sync() is not that smart. If the chip has not reset (so
the driver has not called regcache_mark_dirty()) a regcache_sync()
could write out registers that are not dirty.
To avoid accidental overwriting of the ASP registers, they are
removed from the table of defaults and instead are populated with
defaults only if one of the ASP DAI configuration functions is
called. So if the DAI has never been configured, the firmware is
assumed to have ownership of these registers, and the regmap cache
will not contain any entries for them.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 07f7d6e7a124 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
Link: https://msgid.link/r/20240408101803.43183-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the new regmap_read_bypassed() so that the regmap can be left
in cache-only mode while it is booting, but the driver can still
read boot-status and chip-id information during this time.
This fixes race conditions where some writes could be issued to the
silicon while it is still rebooting, before the driver has determined
that the boot is complete.
This is typically prevented by putting regmap into cache-only until the
hardware is ready. But this assumes that the driver does not need to
access device registers to determine when it is "ready". For cs35l56
this involves polling a register and the original implementation relied
on having special handlers to block racing callbacks until dsp_work()
is complete. However, some cases were missed, most notably the ASP DAI
functions.
The regmap_read_bypassed() function allows the fix for this to be
simplified to putting regmap into cache-only during the reset. The
initial boot stages (poll HALO_STATE and read the chip ID) are all done
bypassed. Only when the amp is seen to be booted is the cache-only
revoked.
Changes are:
- cs35l56_system_reset() now leaves the regmap in cache-only status.
- cs35l56_wait_for_firmware_boot() polls using regmap_read_bypassed().
- cs35l56_init() revokes cache-only either via cs35l56_hw_init() or
when firmware has rebooted after a soft reset.
- cs35l56_hw_init() exits cache-only after it has determined that the
amp has booted.
- cs35l56_sdw_init() doesn't disable cache-only, since this must be
deferred to cs35l56_init().
- cs35l56_runtime_resume_common() waits for firmware boot before exiting
cache-only.
These changes cover three situations where the registers are not
accessible:
1) SoundWire first-time enumeration. The regmap is kept in cache-only
until the chip is fully booted. The original code had to exit
cache-only to read chip status in cs35l56_init() and cs35l56_hw_init()
but this is now deferred to after the firmware has rebooted.
In this case cs35l56_sdw_probe() leaves regmap in cache-only
(unchanged behaviour) and cs35l56_hw_init() exits cache-only after the
firmware is booted and the chip identified.
2) Soft reset during first-time initialization. cs35l56_init() calls
cs35l56_system_reset(), which puts regmap into cache-only.
On I2C/SPI cs35l56_init() then flows through to call
cs35l56_wait_for_firmware_boot() and exit cache-only. On SoundWire
the re-enumeration will enter cs35l56_init() again, which then drops
down to call cs35l56_wait_for_firmware_boot() and exit cache-only.
3) Soft reset after firmware download. dsp_work() calls
cs35l56_system_reset(), which puts regmap into cache-only. After this
the flow is the same as (2).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240408101803.43183-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adds calls to disable regmap cache-only after a successful return from
cs35l56_wait_for_firmware_boot().
This is to prepare for a change in the shared ASoC module that will
leave regmap in cache-only mode after cs35l56_system_reset(). This is
to prevent register accesses going to the hardware while it is
rebooting.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240408101803.43183-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a regmap_read_bypassed() to allow reads from the hardware registers
while the regmap is in cache-only mode.
A typical use for this is to keep the cache in cache-only mode until
the hardware has reached a valid state, but one or more status registers
must be polled to determine when this state is reached.
For example, firmware download on the cs35l56 can take several seconds if
there are multiple amps sharing limited bus bandwidth. This is too long
to block in probe() so it is done as a background task. The device must
be soft-reset to reboot the firmware and during this time the registers are
not accessible, so the cache should be in cache-only. But the driver must
poll a register to detect when reboot has completed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240408101803.43183-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Asus T100TA quirk has been using an exact match on a product-name of
"T100TA" but there are also T100TAM variants with a slightly higher
clocked CPU and a metal backside which need the same quirk.
Sort the existing T100TA (stereo speakers) below the more specific
T100TAF (mono speaker) quirk and switch from exact matching to
substring matching so that the T100TA quirk will also match on
the T100TAM models.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20240407191559.21596-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DSPK configuration is wrong for 16-bit playback and this happens because
the client config is always fixed at 24-bit in hw_params(). Fix this by
updating the client config to 16-bit for the respective playback.
Fixes: 327ef6470266 ("ASoC: tegra: Add Tegra186 based DSPK driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://msgid.link/r/20240405104306.551036-1-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Recent changes addressed PAGE_SIZE ambiguity in 2/3 locations for struct
avs_icl_memwnd2. The unaddressed one causes build errors when
PAGE_SIZE != SZ_4K.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404070100.i3t3Jf7d-lkp@intel.com/
Fixes: 275b583d047a ("ASoC: Intel: avs: ICL-based platforms support")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240408081840.1319431-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix MCE timer reinit locking
- Fix/improve CoCo guest random entropy pool init
- Fix SEV-SNP late disable bugs
- Fix false positive objtool build warning
- Fix header dependency bug
- Fix resctrl CPU offlining bug
* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
x86/CPU/AMD: Track SNP host status with cc_platform_*()
x86/cc: Add cc_platform_set/_clear() helpers
x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
x86/coco: Require seeding RNG with RDRAND on CoCo systems
x86/numa/32: Include missing <asm/pgtable_areas.h>
x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Fix various timer bugs:
- Fix a timer migration bug that may result in missed events
- Fix timer migration group hierarchy event updates
- Fix a PowerPC64 build warning
- Fix a handful of DocBook annotation bugs"
* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Return early on deactivation
timers/migration: Fix ignored event due to missing CPU update
vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
timers: Fix text inconsistencies and spelling
tick/sched: Fix struct tick_sched doc warnings
tick/sched: Fix various kernel-doc warnings
timers: Fix kernel-doc format and add Return values
time/timekeeping: Fix kernel-doc warnings and typos
time/timecounter: Fix inline documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Ingo Molnar:
"Fix a combined PEBS events bug on x86 Intel CPUs"
* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event
|
|
Pull emu10k1 fix patch series
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Both drivers provide both sample_new and sample_free, and it makes no
sense to pretend that they could not. In fact, load_data() would already
crash if sample_new was null. So remove the remaining null checks.
Contrary to that, the emu10k1 driver actually has a null sample_reset,
though I'm not convinced that this inconsistency is justified.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Message-ID: <20240406064830.1029573-18-oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is no need for it to be 32 samples - 3 will do just fine (which is
the interpolator's epsilon). The old size was presumably meant to
compensate for the cache's presence, but we're now handling that
properly.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Message-ID: <20240406064830.1029573-17-oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Compensate for the cache lag of 64 frames, and actually populate the
cache. Without these, the playback would start with garbage (which
would be (mostly?) masqueraded by the note's attack phase).
Note that we set the starting address only 61 frames ahead, to
compensate for the interpolator's epsilon. Unlike for PCM playback, we
don't even need to manually silence-fill the first frames in the cache,
because we insert some silence in front of each sample anyway.
A challenge are extremely short samples with a loop end below the cache
size, because a) we'd have to wrap the current address to be within the
loop and b) automatic pre-filling of the cache with the right data does
not work in this case.
We could pre-fill the cache manually, but that's slow, requires
additional code for each sample width, and is made even more complex by
the driver's virtual address space having no contiguous mapping for the
CPU.
We could have the engine fill the cache piece-wise (which is really what
happens when playback is running), but that would also be complex, and
we'd need to wait for the engine to handle each piece, so it wouldn't be
that much faster than the manual fill.
For the case of requiring only one loop iteration prior to reaching the
cache size, we could leverage the engine's looping mechanism around
CCR_CACHELOOPFLAG, but this special case doesn't seem worth the
complexity.
So we just unroll the loop as far as necessary to be able to play back
the sample without any fiddling.
Pedantically, this would be incorrect for loop-until-release samples
with a low loop end which are released very quickly, but that would be
relatively harmless, is not a plausible use case in the first place, and
SoundFont sample mode 3 isn't actually implemented anyway (it's
conflated with mode 1, infinite looping).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Message-ID: <20240406064830.1029573-16-oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Resulting from more reverse engineering in the course of debugging.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Message-ID: <20240406064830.1029573-15-oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Instead of repeatedly checking the sample width, assign a size shift
centrally.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Message-ID: <20240406064830.1029573-14-oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The offsets are counted in samples, not in bytes.
While the code block is being rewritten, also move it up a bit, to avoid
churn in a subsequent patch.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Message-ID: <20240406064830.1029573-13-oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
