summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-08net/mlx5e: Fix global PFC counters replicationGal Pressman
Currently when reading global PFC statistics we left the counter iterator out of the equation and we ended up reading the same counter over and over again. Instead of reading the counter at index 0 on every iteration we now read the counter at index (i). Fixes: e989d5a532ce ('net/mlx5e: Expose flow control counters to ethtool') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08net/mlx5e: Prevent casting overflowGal Pressman
On 64 bits architectures unsigned long is longer than u32, casting to unsigned long will result in overflow. We need to first allocate an unsigned long variable, then assign the wanted value. Fixes: 665bc53969d7 ('net/mlx5e: Use new ethtool get/set link ksettings API') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08net/mlx5e: Move an_disable_cap bit to a new positionBodong Wang
Previous an_disable_cap position bit31 is deprecated to be use in driver with newer firmware. New firmware will advertise the same capability in bit29. Old capability didn't allow setting more than one protocol for a specific speed when autoneg is off, while newer firmware will allow this and it is indicated in the new capability location. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08net/mlx5e: Fix xmit_more counter race issueTariq Toukan
Update the xmit_more counter before notifying the HW, to prevent a possible use-after-free of the skb. Fixes: c8cf78fe100b ("net/mlx5e: Add ethtool counter for TX xmit_more") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08tcp: fastopen: avoid negative sk_forward_allocEric Dumazet
When DATA and/or FIN are carried in a SYN/ACK message or SYN message, we append an skb in socket receive queue, but we forget to call sk_forced_mem_schedule(). Effect is that the socket has a negative sk->sk_forward_alloc as long as the message is not read by the application. Josh Hunt fixed a similar issue in commit d22e15371811 ("tcp: fix tcp fin memory accounting") Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Josh Hunt <johunt@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08cpufreq-stats: Minor documentation fixJean Delvare
The cpufreq-stats code can no longer be built as a module, so it now appears with square brackets in menuconfig. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 1aefc75b2449 (cpufreq: stats: Make the stats code non-modular) Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-08i2c: rk3x: Restore clock settings at resume timeDoug Anderson
Depending on a number of factors including: - Which exact Rockchip SoC we're working with - How deep we suspend - Which i2c port we're on We might lose the state of the i2c registers at suspend time. Specifically we've found that on rk3399 the i2c ports that are not in the PMU power domain lose their state with the current suspend depth configured by ARM Tursted Firmware. Note that there are very few actual i2c registers that aren't configured per transfer anyway so all we actually need to re-configure are the clock config registers. We'll just add a call to rk3x_i2c_adapt_div() at resume time and be done with it. NOTE: On rk3399 on ports whose power was lost, I put printouts in at resume time. I saw things like: before: con=0x00010300, div=0x00060006 after: con=0x00010200, div=0x00180025 Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: David Wu <david.wu@rock-chips.com> Tested-by: David Wu <david.wu@rock-chips.com> [wsa: removed duplicate const] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: Spelling s/acknowedge/acknowledge/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: designware: save the preset value of DW_IC_SDA_HOLDZhuo-hao Lee
There are several ways to set the SDA hold time for i2c controller, including: Device Tree, built-in device properties and ACPI. However, if the SDA hold time is not specified by above method, we should read the value, where it is preset by firmware, and save it to sda_hold_time. This is needed because when i2c controller enters runtime suspend, the DW_IC_SDA_HOLD value will be reset to chipset default value. And during runtime resume, i2c_dw_init will be called to reconfigure i2c controller. If sda_hold_time is zero, the chipset default hold time will be used, that will be too short for some platforms. Therefore, to have a better tolerance, the DW_IC_SDA_HOLD value should be kept by sda_hold_time. Signed-off-by: Zhuo-hao Lee <zhuo-hao.lee@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== ipsec 2016-09-08 1) Fix a crash when xfrm_dump_sa returns an error. From Vegard Nossum. 2) Remove some incorrect WARN() on normal error handling. From Vegard Nossum. 3) Ignore socket policies when rebuilding hash tables, socket policies are not inserted into the hash tables. From Tobias Brunner. 4) Initialize and check tunnel pointers properly before we use it. From Alexey Kodanev. 5) Fix l3mdev oif setting on xfrm dst lookups. From David Ahern. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08Merge tag 'ceph-for-4.8-rc6' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fix from Ilya Dryomov: "A fix for a 4.7 performance regression, caused by a typo in an if condition" * tag 'ceph-for-4.8-rc6' of git://github.com/ceph/ceph-client: ceph: do not modify fi->frag in need_reset_readdir()
2016-09-08Merge branch 'dmi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi fix from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: dmi-id: don't free dev structure after calling device_register
2016-09-08Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This is a slightly larger batch of fixes that we've been sitting on a few -rcs. Most of them are simple oneliners, but there are two sets that are slightly larger and worth pointing out: - A set of patches to OMAP to deal with hwmod for RTC on am33xx (beaglebone SoC, among others). It's the only clock that ever has a valid offset of 0, so a new flag needed introduction once this problem was discovered. - A collection of CCI fixes for performance counters discovered once people started using it on X-Gene CPUs" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) arm-cci: pmu: Fix typo in event name Revert "ARM: tegra: fix erroneous address in dts" ARM: dts: imx6qdl: Fix SPDIF regression ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name ARM: dts: kirkwood: Fix PCIe label on OpenRD ARM: kirkwood: ib62x0: fix size of u-boot environment partition bus: arm-ccn: make event groups reliable bus: arm-ccn: fix hrtimer registration bus: arm-ccn: fix PMU interrupt flags ARM: tegra: Correct polarity for Tegra114 PMIC interrupt MAINTAINERS: add tree entry for ARM/UniPhier architecture ARM: sun5i: Fix typo in trip point temperature MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski ARM: imx6ul: populates platform device at .init_machine bus: arm-ccn: Add missing event attribute exclusions for host/guest bus: arm-ccn: Correct required arguments for XP PMU events bus: arm-ccn: Fix XP watchpoint settings bitmask bus: arm-ccn: Do not attempt to configure XPs for cycle counter bus: arm-ccn: Fix PMU handling of MN ...
2016-09-08Documentation: i2c: slave-interface: add note for driver developmentWolfram Sang
Make it clear that adding slave support shall not disable master functionality. We can have both, so we should. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: mux: demux-pinctrl: run properly with multiple instancesWolfram Sang
We can't use a static property for all the changesets, so we now create dynamic ones for each changeset. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Fixes: 50a5ba87690814 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08ALSA: rawmidi: Fix possible deadlock with virmidi registrationTakashi Iwai
When a seq-virmidi driver is initialized, it registers a rawmidi instance with its callback to create an associated seq kernel client. Currently it's done throughly in rawmidi's register_mutex context. Recently it was found that this may lead to a deadlock another rawmidi device that is being attached with the sequencer is accessed, as both open with the same register_mutex. This was actually triggered by syzkaller, as Dmitry Vyukov reported: ====================================================== [ INFO: possible circular locking dependency detected ] 4.8.0-rc1+ #11 Not tainted ------------------------------------------------------- syz-executor/7154 is trying to acquire lock: (register_mutex#5){+.+.+.}, at: [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341 but task is already holding lock: (&grp->list_mutex){++++.+}, at: [<ffffffff850138bb>] check_and_subscribe_port+0x5b/0x5c0 sound/core/seq/seq_ports.c:495 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&grp->list_mutex){++++.+}: [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746 [<ffffffff863f6199>] down_read+0x49/0xc0 kernel/locking/rwsem.c:22 [< inline >] deliver_to_subscribers sound/core/seq/seq_clientmgr.c:681 [<ffffffff85005c5e>] snd_seq_deliver_event+0x35e/0x890 sound/core/seq/seq_clientmgr.c:822 [<ffffffff85006e96>] > snd_seq_kernel_client_dispatch+0x126/0x170 sound/core/seq/seq_clientmgr.c:2418 [<ffffffff85012c52>] snd_seq_system_broadcast+0xb2/0xf0 sound/core/seq/seq_system.c:101 [<ffffffff84fff70a>] snd_seq_create_kernel_client+0x24a/0x330 sound/core/seq/seq_clientmgr.c:2297 [< inline >] snd_virmidi_dev_attach_seq sound/core/seq/seq_virmidi.c:383 [<ffffffff8502d29f>] snd_virmidi_dev_register+0x29f/0x750 sound/core/seq/seq_virmidi.c:450 [<ffffffff84fd208c>] snd_rawmidi_dev_register+0x30c/0xd40 sound/core/rawmidi.c:1645 [<ffffffff84f816d3>] __snd_device_register.part.0+0x63/0xc0 sound/core/device.c:164 [< inline >] __snd_device_register sound/core/device.c:162 [<ffffffff84f8235d>] snd_device_register_all+0xad/0x110 sound/core/device.c:212 [<ffffffff84f7546f>] snd_card_register+0xef/0x6c0 sound/core/init.c:749 [<ffffffff85040b7f>] snd_virmidi_probe+0x3ef/0x590 sound/drivers/virmidi.c:123 [<ffffffff833ebf7b>] platform_drv_probe+0x8b/0x170 drivers/base/platform.c:564 ...... -> #0 (register_mutex#5){+.+.+.}: [< inline >] check_prev_add kernel/locking/lockdep.c:1829 [< inline >] check_prevs_add kernel/locking/lockdep.c:1939 [< inline >] validate_chain kernel/locking/lockdep.c:2266 [<ffffffff814791f4>] __lock_acquire+0x4d44/0x4d80 kernel/locking/lockdep.c:3335 [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746 [< inline >] __mutex_lock_common kernel/locking/mutex.c:521 [<ffffffff863f0ef1>] mutex_lock_nested+0xb1/0xa20 kernel/locking/mutex.c:621 [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341 [<ffffffff8502e7c7>] midisynth_subscribe+0xf7/0x350 sound/core/seq/seq_midi.c:188 [< inline >] subscribe_port sound/core/seq/seq_ports.c:427 [<ffffffff85013cc7>] check_and_subscribe_port+0x467/0x5c0 sound/core/seq/seq_ports.c:510 [<ffffffff85015da9>] snd_seq_port_connect+0x2c9/0x500 sound/core/seq/seq_ports.c:579 [<ffffffff850079b8>] snd_seq_ioctl_subscribe_port+0x1d8/0x2b0 sound/core/seq/seq_clientmgr.c:1480 [<ffffffff84ffe9e4>] snd_seq_do_ioctl+0x184/0x1e0 sound/core/seq/seq_clientmgr.c:2225 [<ffffffff84ffeae8>] snd_seq_kernel_client_ctl+0xa8/0x110 sound/core/seq/seq_clientmgr.c:2440 [<ffffffff85027664>] snd_seq_oss_midi_open+0x3b4/0x610 sound/core/seq/oss/seq_oss_midi.c:375 [<ffffffff85023d67>] snd_seq_oss_synth_setup_midi+0x107/0x4c0 sound/core/seq/oss/seq_oss_synth.c:281 [<ffffffff8501b0a8>] snd_seq_oss_open+0x748/0x8d0 sound/core/seq/oss/seq_oss_init.c:274 [<ffffffff85019d8a>] odev_open+0x6a/0x90 sound/core/seq/oss/seq_oss.c:138 [<ffffffff84f7040f>] soundcore_open+0x30f/0x640 sound/sound_core.c:639 ...... other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&grp->list_mutex); lock(register_mutex#5); lock(&grp->list_mutex); lock(register_mutex#5); *** DEADLOCK *** ====================================================== The fix is to simply move the registration parts in snd_rawmidi_dev_register() to the outside of the register_mutex lock. The lock is needed only to manage the linked list, and it's not necessarily to cover the whole initialization process. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-08ALSA: timer: Fix zero-division by continue of uninitialized instanceTakashi Iwai
When a user timer instance is continued without the explicit start beforehand, the system gets eventually zero-division error like: divide error: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN CPU: 1 PID: 27320 Comm: syz-executor Not tainted 4.8.0-rc3-next-20160825+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88003c9b2280 task.stack: ffff880027280000 RIP: 0010:[<ffffffff858e1a6c>] [< inline >] ktime_divns include/linux/ktime.h:195 RIP: 0010:[<ffffffff858e1a6c>] [<ffffffff858e1a6c>] snd_hrtimer_callback+0x1bc/0x3c0 sound/core/hrtimer.c:62 Call Trace: <IRQ> [< inline >] __run_hrtimer kernel/time/hrtimer.c:1238 [<ffffffff81504335>] __hrtimer_run_queues+0x325/0xe70 kernel/time/hrtimer.c:1302 [<ffffffff81506ceb>] hrtimer_interrupt+0x18b/0x420 kernel/time/hrtimer.c:1336 [<ffffffff8126d8df>] local_apic_timer_interrupt+0x6f/0xe0 arch/x86/kernel/apic/apic.c:933 [<ffffffff86e13056>] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:957 [<ffffffff86e1210c>] apic_timer_interrupt+0x8c/0xa0 arch/x86/entry/entry_64.S:487 <EOI> ..... Although a similar issue was spotted and a fix patch was merged in commit [6b760bb2c63a: ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUE], it seems covering only a part of iceberg. In this patch, we fix the issue a bit more drastically. Basically the continue of an uninitialized timer is supposed to be a fresh start, so we do it for user timers. For the direct snd_timer_continue() call, there is no way to pass the initial tick value, so we kick out for the uninitialized case. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-08dmi-id: don't free dev structure after calling device_registerAllen Hung
dmi_dev is freed in error exit code but, according to the document of device_register, it should never directly free device structure after calling this function, even if it returned an error! Use put_device() instead. Signed-off-by: Allen Hung <allen_hung@dell.com> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2016-09-08xhci: fix null pointer dereference in stop command timeout functionMathias Nyman
The stop endpoint command has its own 5 second timeout timer. If the timeout function is triggered between USB3 and USB2 host removal it will try to call usb_hc_died(xhci_to_hcd(xhci)->primary_hcd) the ->primary_hcd will be set to NULL at USB3 hcd removal. Fix this by first checking if the PCI host is being removed, and also by using only xhci_to_hcd() as it will always return the primary hcd. CC: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07Merge branch 'for-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal fix from Zhang Rui: "Only one patch this time, which fixes a crash in rcar_thermal driver. From Dirk Behme" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: rcar_thermal: Fix priv->zone error handling
2016-09-07Merge tag 'sunxi-fixes-for-4.8' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Allwinner fixes for 4.8 A single patch fixing a typo in the temperature trip points in the A13 DTSI. * tag 'sunxi-fixes-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: sun5i: Fix typo in trip point temperature Signed-off-by: Olof Johansson <olof@lixom.net>
2016-09-07arm-cci: pmu: Fix typo in event nameSuzuki K Poulose
For one of the CCI events exposed under sysfs, "snoop" was typo'd as "snopp". Correct this such that users see the expected event name when enumerating events via sysfs. Cc: arm@kernel.org Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-09-07Merge tag 'imx-fixes-4.8-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.8, 2nd round: - Fix misspelled "ti,x-plate-ohms" property name of touchscreen controller for imx7d-sdb DTS. - Add missing BM_CLPCR_BYPASS_PMIC_READY setting for i.MX6SX to get suspend/resume work properly. - Fix SPDIF regression on imx6qdl which caused by a clock update on spdif device node. * tag 'imx-fixes-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl: Fix SPDIF regression ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name Signed-off-by: Olof Johansson <olof@lixom.net>
2016-09-07Revert "ARM: tegra: fix erroneous address in dts"Olof Johansson
This reverts commit b5c86b7496d74f6e454bcab5166efa023e1f0459. This is no longer needed due to other changes going into 4.8 to rename the unit addresses on a large number of device nodes. So it was picked up for v4.8-rc1 in error. Reported-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-09-08powerpc/mm: Don't alias user region to other regions below PAGE_OFFSETPaul Mackerras
In commit c60ac5693c47 ("powerpc: Update kernel VSID range", 2013-03-13) we lost a check on the region number (the top four bits of the effective address) for addresses below PAGE_OFFSET. That commit replaced a check that the top 18 bits were all zero with a check that bits 46 - 59 were zero (performed for all addresses, not just user addresses). This means that userspace can access an address like 0x1000_0xxx_xxxx_xxxx and we will insert a valid SLB entry for it. The VSID used will be the same as if the top 4 bits were 0, but the page size will be some random value obtained by indexing beyond the end of the mm_ctx_high_slices_psize array in the paca. If that page size is the same as would be used for region 0, then userspace just has an alias of the region 0 space. If the page size is different, then no HPTE will be found for the access, and the process will get a SIGSEGV (since hash_page_mm() will refuse to create a HPTE for the bogus address). The access beyond the end of the mm_ctx_high_slices_psize can be at most 5.5MB past the array, and so will be in RAM somewhere. Since the access is a load performed in real mode, it won't fault or crash the kernel. At most this bug could perhaps leak a little bit of information about blocks of 32 bytes of memory located at offsets of i * 512kB past the paca->mm_ctx_high_slices_psize array, for 1 <= i <= 11. Fixes: c60ac5693c47 ("powerpc: Update kernel VSID range") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-08powerpc/32: Fix again csum_partial_copy_generic()Christophe Leroy
Commit 7aef4136566b0 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()") introduced a bug when destination address is odd and len is lower than cacheline size. In that case the resulting csum value doesn't have to be rotated one byte because the cache-aligned copy part is skipped so no alignment is performed. Fixes: 7aef4136566b0 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()") Cc: stable@vger.kernel.org # v4.6+ Reported-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Tested-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-08powerpc/powernv: Fix corrupted PE allocation bitmap on releasing PEGavin Shan
In pnv_ioda_free_pe(), the PE object (including the associated PE number) is cleared before resetting the corresponding bit in the PE allocation bitmap. It means PE#0 is always released to the bitmap wrongly. This fixes above issue by caching the PE number before the PE object is cleared. Fixes: 1e9167726c41 ("powerpc/powernv: Use PE instead of number during setup and release" Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-07MAINTAINERS: Update CPMAC email addressFlorian Fainelli
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08gpio: sa1100: fix irq probing for ucb1x00Russell King
ucb1x00 has used IRQ probing since it's dawn to find the GPIO interrupt that it's connected to. However, commit 23393d49fb75 ("gpio: kill off set_irq_flags usage") broke this by disabling IRQ probing on GPIO interrupts. Fix this. Fixes: 23393d49fb75 ("gpio: kill off set_irq_flags usage") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-08gpio: mcp23s08: make driver depend on OF_GPIOLinus Walleij
The MCP23S08 driver certainly accesses fields inside the struct gpio_chip that are only available under CONFIG_OF_GPIO not just CONFIG_OF, so update the Kconfig and driver to reflect this. Cc: Alexander Stein <alexander.stein@systec-electronic.com> Cc: Phil Reid <preid@electromag.com.au> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-08Revert "gpio: include <linux/io-mapping.h> in gpiolib-of"Linus Walleij
This reverts commit 7d4defe21c682c934a19fce1ba8b54b7bde61b08. The commit was pointless, manically trembling in the dark for a solution. The real fixes are: commit 048c28c91e56 ("gpio: make any OF dependent driver depend on OF_GPIO") commit 2527ecc9195e ("gpio: Fix OF build problem on UM") Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-07Merge tag 'usercopy-v4.8-rc6-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more hardened usercopyfixes from Kees Cook: - force check_object_size() to be inline too - move page-spanning check behind a CONFIG since it's triggering false positives [ Changed the page-spanning config option to depend on EXPERT in the merge. That way it still gets build testing, and you can enable it if you want to, but is never enabled for "normal" configurations ] * tag 'usercopy-v4.8-rc6-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usercopy: remove page-spanning test for now usercopy: force check_object_size() inline
2016-09-07Merge branch 'for-chris' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.8
2016-09-07usercopy: remove page-spanning test for nowKees Cook
A custom allocator without __GFP_COMP that copies to userspace has been found in vmw_execbuf_process[1], so this disables the page-span checker by placing it behind a CONFIG for future work where such things can be tracked down later. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1373326 Reported-by: Vinson Lee <vlee@freedesktop.org> Fixes: f5509cc18daa ("mm: Hardened usercopy") Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-07usercopy: force check_object_size() inlineKees Cook
Just for good measure, make sure that check_object_size() is always inlined too, as already done for copy_*_user() and __copy_*_user(). Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-07Merge tag 'seccomp-v4.8-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp fixes from Kees Cook: "Fix UM seccomp vs ptrace, after reordering landed" * tag 'seccomp-v4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Remove 2-phase API documentation um/ptrace: Fix the syscall number update after a ptrace um/ptrace: Fix the syscall_trace_leave call
2016-09-07Merge ath-current from ath.gitKalle Valo
ath.git fixes for 4.8. Major changes: ath10k * fix racy rx status retrieval from htt context * QCA9887 support is not experimental anymore, remove the warning message ath9k * fix regression with led GPIOs * fix AR5416 GPIO access warning
2016-09-07Merge tag 'usercopy-v4.8-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardened usercopy fixes from Kees Cook: - inline copy_*_user() for correct use of __builtin_const_p() for hardened usercopy and the recent compile-time checks. - switch hardened usercopy to only check non-const size arguments to avoid meaningless checks on likely-sane const values. - update lkdtm usercopy tests to compenstate for the const checking. * tag 'usercopy-v4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lkdtm: adjust usercopy tests to bypass const checks usercopy: fold builtin_const check into inline function x86/uaccess: force copy_*_user() to be inlined
2016-09-07seccomp: Remove 2-phase API documentationMickaël Salaün
Fixes: 8112c4f140fa ("seccomp: remove 2-phase API") Signed-off-by: Mickaël Salaün <mic@digikod.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: James Morris <jmorris@namei.org> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-07um/ptrace: Fix the syscall number update after a ptraceMickaël Salaün
Update the syscall number after each PTRACE_SETREGS on ORIG_*AX. This is needed to get the potentially altered syscall number in the seccomp filters after RET_TRACE. This fix four seccomp_bpf tests: > [ RUN ] TRACE_syscall.skip_after_RET_TRACE > seccomp_bpf.c:1560:TRACE_syscall.skip_after_RET_TRACE:Expected -1 (18446744073709551615) == syscall(39) (26) > seccomp_bpf.c:1561:TRACE_syscall.skip_after_RET_TRACE:Expected 1 (1) == (*__errno_location ()) (22) > [ FAIL ] TRACE_syscall.skip_after_RET_TRACE > [ RUN ] TRACE_syscall.kill_after_RET_TRACE > TRACE_syscall.kill_after_RET_TRACE: Test exited normally instead of by signal (code: 1) > [ FAIL ] TRACE_syscall.kill_after_RET_TRACE > [ RUN ] TRACE_syscall.skip_after_ptrace > seccomp_bpf.c:1622:TRACE_syscall.skip_after_ptrace:Expected -1 (18446744073709551615) == syscall(39) (26) > seccomp_bpf.c:1623:TRACE_syscall.skip_after_ptrace:Expected 1 (1) == (*__errno_location ()) (22) > [ FAIL ] TRACE_syscall.skip_after_ptrace > [ RUN ] TRACE_syscall.kill_after_ptrace > TRACE_syscall.kill_after_ptrace: Test exited normally instead of by signal (code: 1) > [ FAIL ] TRACE_syscall.kill_after_ptrace Fixes: 26703c636c1f ("um/ptrace: run seccomp after ptrace") Signed-off-by: Mickaël Salaün <mic@digikod.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: James Morris <jmorris@namei.org> Cc: user-mode-linux-devel@lists.sourceforge.net Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-07um/ptrace: Fix the syscall_trace_leave callMickaël Salaün
Keep the same semantic as before the commit 26703c636c1f: deallocate audit context and fake a proper syscall exit. This fix a kernel panic triggered by the seccomp_bpf test: > [ RUN ] global.ERRNO_valid > BUG: failure at kernel/auditsc.c:1504/__audit_syscall_entry()! > Kernel panic - not syncing: BUG! Fixes: 26703c636c1f ("um/ptrace: run seccomp after ptrace") Signed-off-by: Mickaël Salaün <mic@digikod.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: James Morris <jmorris@namei.org> Cc: user-mode-linux-devel@lists.sourceforge.net Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-07brcmfmac: avoid potential stack overflow in brcmf_cfg80211_start_ap()Arend Van Spriel
User-space can choose to omit NL80211_ATTR_SSID and only provide raw IE TLV data. When doing so it can provide SSID IE with length exceeding the allowed size. The driver further processes this IE copying it into a local variable without checking the length. Hence stack can be corrupted and used as exploit. Cc: stable@vger.kernel.org # v4.7 Reported-by: Daxing Guo <freener.gdx@gmail.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-07ath9k: bring back direction setting in ath9k_{start_stop}Giedrius Statkevičius
A regression was introduced in commit id 79d4db1214a ("ath9k: cleanup led_pin initial") that broken the WLAN status led on my laptop with AR9287 after suspending and resuming. Steps to reproduce: * Suspend (laptop) * Resume (laptop) * Observe that the WLAN led no longer turns ON/OFF depending on the status and is always red Even though for my case it only needs to be set to OUT in ath9k_start but for consistency bring back the IN direction setting as well. Fixes: 79d4db1214a0 ("ath9k: cleanup led_pin initial") Cc: Miaoqing Pan <miaoqing@codeaurora.org> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: <stable@vger.kernel.org> # 4.7+ Link: https://bugzilla.kernel.org/show_bug.cgi?id=151711 Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com> [kvalo@qca.qualcomm.com: improve commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-07usb: dwc3: pci: fix build warning on !PM_SLEEPFelipe Balbi
When building a kernel with CONFIG_PM_SLEEP=n, we get the following warning: drivers/usb/dwc3/dwc3-pci.c:253:12: warning: 'dwc3_pci_pm_dummy' defined but not used In order to fix this, we should only define dwc3_pci_pm_dummy() when CONFIG_PM_SLEEP is defined. Fixes: f6c274e11e3b ("usb: dwc3: pci: runtime_resume child device") Reported-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06ipv6: addrconf: fix dev refcont leak when DAD failedWei Yongjun
In general, when DAD detected IPv6 duplicate address, ifp->state will be set to INET6_IFADDR_STATE_ERRDAD and DAD is stopped by a delayed work, the call tree should be like this: ndisc_recv_ns -> addrconf_dad_failure <- missing ifp put -> addrconf_mod_dad_work -> schedule addrconf_dad_work() -> addrconf_dad_stop() <- missing ifp hold before call it addrconf_dad_failure() called with ifp refcont holding but not put. addrconf_dad_work() call addrconf_dad_stop() without extra holding refcount. This will not cause any issue normally. But the race between addrconf_dad_failure() and addrconf_dad_work() may cause ifp refcount leak and netdevice can not be unregister, dmesg show the following messages: IPv6: eth0: IPv6 duplicate address fe80::XX:XXXX:XXXX:XX detected! ... unregister_netdevice: waiting for eth0 to become free. Usage count = 1 Cc: stable@vger.kernel.org Fixes: c15b1ccadb32 ("ipv6: move DAD and addrconf_verify processing to workqueue") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06bnxt_en: Fix TX push operation on ARM64.Michael Chan
There is a code path where we are calling __iowrite64_copy() on an address that is not 64-bit aligned. This causes an exception on some architectures such as arm64. Fix that code path by using __iowrite32_copy(). Reported-by: JD Zheng <jiandong.zheng@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06net: Don't delete routes in different VRFsMark Tomlinson
When deleting an IP address from an interface, there is a clean-up of routes which refer to this local address. However, there was no check to see that the VRF matched. This meant that deletion wasn't confined to the VRF it should have been. To solve this, a new field has been added to fib_info to hold a table id. When removing fib entries corresponding to a local ip address, this table id is also used in the comparison. The table id is populated when the fib_info is created. This was already done in some places, but not in ip_rt_ioctl(). This has now been fixed. Fixes: 021dd3b8a142 ("net: Add routes to the table associated with the device") Acked-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06net: smsc: remove build warning of duplicate definitionSudip Mukherjee
The build of m32r was giving warning: In file included from drivers/net/ethernet/smsc/smc91x.c:92:0: drivers/net/ethernet/smsc/smc91x.h:448:0: warning: "SMC_inb" redefined #define SMC_inb(ioaddr, reg) ({ BUG(); 0; }) drivers/net/ethernet/smsc/smc91x.h:106:0: note: this is the location of the previous definition #define SMC_inb(a, r) inb(((u32)a) + (r)) drivers/net/ethernet/smsc/smc91x.h:449:0: warning: "SMC_outb" redefined #define SMC_outb(x, ioaddr, reg) BUG() drivers/net/ethernet/smsc/smc91x.h:108:0: note: this is the location of the previous definition #define SMC_outb(v, a, r) outb(v, ((u32)a) + (r)) Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06net: macb: initialize checksum when using checksum offloadingHelmut Buchsbaum
I'm still struggling to get this fix right.. Changes since v2: - do not blindly modify SKB contents according to Dave's legitimate objection Changes since v1: - dropped disabling HW checksum offload for Zynq - initialize checksum similar to net/ethernet/freescale/fec_main.c -- >8 -- MACB/GEM needs the checksum field initialized to 0 to get correct results on transmit in all cases, e.g. on Zynq, UDP packets with payload <= 2 otherwise contain a wrong checksums. Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06ipv6: release dst in ping_v6_sendmsgDave Jones
Neither the failure or success paths of ping_v6_sendmsg release the dst it acquires. This leads to a flood of warnings from "net/core/dst.c:288 dst_release" on older kernels that don't have 8bf4ada2e21378816b28205427ee6b0e1ca4c5f1 backported. That patch optimistically hoped this had been fixed post 3.10, but it seems at least one case wasn't, where I've seen this triggered a lot from machines doing unprivileged icmp sockets. Cc: Martin Lau <kafai@fb.com> Signed-off-by: Dave Jones <davej@codemonkey.org.uk> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 07:17:22 +0000