summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-03-03dt-bindings: input/touchscreen: Add compatible for IST3038BMarkuss Broks
Imagis IST3038B is a variant (firmware?) of Imagis IST3038 IC differing from IST3038C in its register interface. Add the compatible for it to the IST3038C bindings. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> [balejk@matfyz.cz: elaborate chip differences in the commit message] Signed-off-by: Karel Balej <balejk@matfyz.cz> Link: https://lore.kernel.org/r/20240301164659.13240-3-karelb@gimli.ms.mff.cuni.cz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-03input/touchscreen: imagis: Correct the maximum touch area valueMarkuss Broks
As specified in downstream IST3038B driver and proved by testing, the correct maximum reported value of touch area is 16. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Signed-off-by: Karel Balej <balejk@matfyz.cz> Link: https://lore.kernel.org/r/20240301164659.13240-2-karelb@gimli.ms.mff.cuni.cz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-03Input: xpad - add additional HyperX Controller IdentifiersMax Nguyen
Add additional HyperX device identifiers to xpad_device and xpad_table. Suggested-by: Chris Toledanes<chris.toledanes@hp.com> Reviewed-by: Carl Ng <carl.ng@hp.com> Signed-off-by: Max Nguyen <maxwell.nguyen@hp.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/44ad5ffa-76d8-4046-94ee-2ef171930ed2@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-03-03Input: leds - change config symbol dependency for audio mute triggerHeiner Kallweit
In a follow-up patch implementation of the LED audio trigger will be moved to sound/core/snd_ctl_led, including removal of config symbol LEDS_AUDIO_TRIGGER. Also as of today the audio mute LED trigger is effectively a no-op w/o config symbol SND_CTL_LED being defined. Therefore switch the dependency to this config symbol. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/6011ca63-187c-42dd-a5fd-7dd733d6257c@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-09Input: ti_am335x_tsc - remove redundant assignment to variable configColin Ian King
The variable config is being initialized with a value that is never read, it is being re-assigned in the next statement. The initialization is redundant and can be removed. Cleans up clang scan build warning: drivers/input/touchscreen/ti_am335x_tsc.c:160:2: warning: Value stored to 'config' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240205215940.1851349-1-colin.i.king@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-08Input: xpad - sort xpad_device by vendor and product IDBrenton Simpson
This helps making sure there are no duplicate entries in the tables. Signed-off-by: Brenton Simpson <appsforartists@google.com> Link: https://lore.kernel.org/r/20240130231903.293265-1-appsforartists@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-06Input: gameport - make gameport_bus constRicardo B. Marliere
Now that the driver core can properly handle constant struct bus_type, move the gameport_bus variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240204-bus_cleanup-input-v1-1-74c2438801cf@marliere.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-02Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk tableSzilard Fabian
Another Fujitsu-related patch. In the initial boot stage the integrated keyboard of Fujitsu Lifebook U728 refuses to work and it's not possible to type for example a dm-crypt passphrase without the help of an external keyboard. i8042.nomux kernel parameter resolves this issue but using that a PS/2 mouse is detected. This input device is unused even when the i2c-hid-acpi kernel module is blacklisted making the integrated ELAN touchpad (04F3:3092) not working at all. So this notebook uses a hid-over-i2c touchpad which is managed by the i2c_designware input driver. Since you can't find a PS/2 mouse port on this computer and you can't connect a PS/2 mouse to it even with an official port replicator I think it's safe to not use the PS/2 mouse port at all. Signed-off-by: Szilard Fabian <szfabian@bluemarch.art> Link: https://lore.kernel.org/r/20240103014717.127307-2-szfabian@bluemarch.art Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-02Input: i8042 - fix strange behavior of touchpad on Clevo NS70PUWerner Sembach
When closing the laptop lid with an external screen connected, the mouse pointer has a constant movement to the lower right corner. Opening the lid again stops this movement, but after that the touchpad does no longer register clicks. The touchpad is connected both via i2c-hid and PS/2, the predecessor of this device (NS70MU) has the same layout in this regard and also strange behaviour caused by the psmouse and the i2c-hid driver fighting over touchpad control. This fix is reusing the same workaround by just disabling the PS/2 aux port, that is only used by the touchpad, to give the i2c-hid driver the lone control over the touchpad. v2: Rebased on current master Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231205163602.16106-1-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-01Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETIDHans de Goede
After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") not only the getid command is skipped, but also the de-activating of the keyboard at the end of atkbd_probe(), potentially re-introducing the problem fixed by commit be2d7e4233a4 ("Input: atkbd - fix multi-byte scancode handling on reconnect"). Make sure multi-byte scancode handling on reconnect is still handled correctly by not skipping the atkbd_deactivate() call. Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240126160724.13278-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-02-01Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETIDHans de Goede
After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") the keyboard on Dell XPS 13 9350 / 9360 / 9370 models has stopped working after a suspend/resume. The problem appears to be that atkbd_probe() fails when called from atkbd_reconnect() on resume, which on systems where ATKBD_CMD_GETID is skipped can only happen by ATKBD_CMD_SETLEDS failing. ATKBD_CMD_SETLEDS failing because ATKBD_CMD_GETID was skipped is weird, but apparently that is what is happening. Fix this by also skipping ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID. Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/linux-input/0aa4a61f-c939-46fe-a572-08022e8931c7@molgen.mpg.de/ Closes: https://bbs.archlinux.org/viewtopic.php?pid=2146300 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218424 Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2260517 Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240126160724.13278-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-31Input: matrix_keypad - switch to using managed resourcesDmitry Torokhov
Switch the drivers to use managed resources (devm) to simplify error handling and remove the need to have remove() implementation. Link: https://lore.kernel.org/r/20240121053232.276968-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-31Input: matrix_keypad - consolidate handling of clustered interruptDmitry Torokhov
Now that the driver stores interrupt numbers corresponding to individual GPIOs in non-clustered mode, it is possible to unify handling of both modes by storing clustered interrupt at position 0 and setting the number of interrupts in this case to 1. Link: https://lore.kernel.org/r/20240121053232.276968-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-31Input: matrix_keypad - avoid repeatedly converting GPIO to IRQDmitry Torokhov
There is no need to do conversion from GPIOs to interrupt numbers. Convert row GPIOs to interrupt numbers once in probe() and use this information when the driver needs to enable or disable given interrupt line. Link: https://lore.kernel.org/r/20240121053232.276968-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-31Input: bcm5974 - check endpoint type before starting trafficJavier Carrasco
syzbot has found a type mismatch between a USB pipe and the transfer endpoint, which is triggered by the bcm5974 driver[1]. This driver expects the device to provide input interrupt endpoints and if that is not the case, the driver registration should terminate. Repros are available to reproduce this issue with a certain setup for the dummy_hcd, leading to an interrupt/bulk mismatch which is caught in the USB core after calling usb_submit_urb() with the following message: "BOGUS urb xfer, pipe 1 != type 3" Some other device drivers (like the appletouch driver bcm5974 is mainly based on) provide some checking mechanism to make sure that an IN interrupt endpoint is available. In this particular case the endpoint addresses are provided by a config table, so the checking can be targeted to the provided endpoints. Add some basic checking to guarantee that the endpoints available match the expected type for both the trackpad and button endpoints. This issue was only found for the trackpad endpoint, but the checking has been added to the button endpoint as well for the same reasons. Given that there was never a check for the endpoint type, this bug has been there since the first implementation of the driver (f89bd95c5c94). [1] https://syzkaller.appspot.com/bug?extid=348331f63b034f89b622 Fixes: f89bd95c5c94 ("Input: bcm5974 - add driver for Macbook Air and Pro Penryn touchpads") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reported-and-tested-by: syzbot+348331f63b034f89b622@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20231007-topic-bcm5974_bulk-v3-1-d0f38b9d2935@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-30Input: goodix-berlin - add SPI support for Goodix Berlin Touchscreen ICNeil Armstrong
Add initial support for the new Goodix "Berlin" touchscreen ICs over the SPI interface. The driver doesn't use the regmap_spi code since the SPI messages needs to be prefixed, thus this custom regmap code. This initial driver is derived from the Goodix goodix_ts_berlin available at [1] and [2] and only supports the GT9916 IC present on the Qualcomm SM8550 MTP & QRD touch panel. The current implementation only supports BerlinD, aka GT9916. [1] https://github.com/goodix/goodix_ts_berlin [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers Reviewed-by: Jeff LaBundy <jeff@labundy.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240129-topic-goodix-berlin-upstream-initial-v15-4-6f7d096c0a0a@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-30Input: goodix-berlin - add I2C support for Goodix Berlin Touchscreen ICNeil Armstrong
Add initial support for the new Goodix "Berlin" touchscreen ICs over the I2C interface. This initial driver is derived from the Goodix goodix_ts_berlin available at [1] and [2] and only supports the GT9916 IC present on the Qualcomm SM8550 MTP & QRD touch panel. The current implementation only supports BerlinD, aka GT9916. [1] https://github.com/goodix/goodix_ts_berlin [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers Reviewed-by: Jeff LaBundy <jeff@labundy.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240129-topic-goodix-berlin-upstream-initial-v15-3-6f7d096c0a0a@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-30Input: add core support for Goodix Berlin Touchscreen ICNeil Armstrong
Add initial support for the new Goodix "Berlin" touchscreen ICs. These touchscreen ICs support SPI, I2C and I3C interface, up to 10 finger touch, stylus and gestures events. This initial driver is derived from the Goodix goodix_ts_berlin available at [1] and [2] and only supports the GT9916 IC present on the Qualcomm SM8550 MTP & QRD touch panel. The current implementation only supports BerlinD, aka GT9916. Support for advanced features like: - Firmware & config update - Stylus events - Gestures events - Previous revisions support (BerlinA or BerlinB) is not included in current version. The current support will work with currently flashed firmware and config, and bail out if firmware or config aren't flashed yet. [1] https://github.com/goodix/goodix_ts_berlin [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers Reviewed-by: Jeff LaBundy <jeff@labundy.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240129-topic-goodix-berlin-upstream-initial-v15-2-6f7d096c0a0a@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-30dt-bindings: input: document Goodix Berlin Touchscreen ICNeil Armstrong
Document the Goodix GT9916 wich is part of the "Berlin" serie of Touchscreen controllers IC from Goodix. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240129-topic-goodix-berlin-upstream-initial-v15-1-6f7d096c0a0a@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-30Input: xpad - add Lenovo Legion Go controllersBrenton Simpson
The Lenovo Legion Go is a handheld gaming system, similar to a Steam Deck. It has a gamepad (including rear paddles), 3 gyroscopes, a trackpad, volume buttons, a power button, and 2 LED ring lights. The Legion Go firmware presents these controls as a USB hub with various devices attached. In its default state, the gamepad is presented as an Xbox controller connected to this hub. (By holding a combination of buttons, it can be changed to use the older DirectInput API.) This patch teaches the existing Xbox controller module `xpad` to bind to the controller in the Legion Go, which enables support for the: - directional pad, - analog sticks (including clicks), - X, Y, A, B, - start and select (or menu and capture), - shoulder buttons, and - rumble. The trackpad, touchscreen, volume controls, and power button are already supported via existing kernel modules. Two of the face buttons, the gyroscopes, rear paddles, and LEDs are not. After this patch lands, the Legion Go will be mostly functional in Linux, out-of-the-box. The various components of the USB hub can be synthesized into a single logical controller (including the additional buttons) in userspace with [Handheld Daemon](https://github.com/hhd-dev/hhd), which makes the Go fully functional. Signed-off-by: Brenton Simpson <appsforartists@google.com> Link: https://lore.kernel.org/r/20240118183546.418064-1-appsforartists@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-23dt-bindings: input: melfas,mms114: add MMS252 compatibleLuca Weiss
Add a compatible for MMS252 touchscreen which appears to work fine with the MMS114 driver. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bryant Mairs <bryant@mai.rs> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231105204759.37107-2-bryant@mai.rs Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-22Input: 88pm80x_onkey - add SPDX and drop GPL boilerplateDuje Mihanović
Add a SPDX-License-Identifier to the 88PM80x onkey driver and drop the GPL boilerplate in accordance with current kernel code guidelines. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240121-88pm80x-onkey-spdx-v1-1-b646d4749f5b@skole.hr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-20Input: leds - set default-trigger for muteBernhard Seibold
Set the default-trigger for the mute led to audio-mute. Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de> Link: https://lore.kernel.org/r/20240113103743.97205-1-mail@bernhard-seibold.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-20dt-bindings: input: touchscreen: goodix: clarify irq-gpios misleading textLuca Ceresoli
The irq-gpios description misleading, apparently saying that driving the IRQ GPIO resets the device, which is even more puzzling as there is a reset GPIO as well. In reality the IRQ pin can be driven during the reset sequence to configure the client address, as it becomes clear after checking both the datasheet and the driver code. Improve the text to clarify that. Also rephrase to remove reference to the driver, which is not appropriate in the bindings. Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20240102081934.11293-1-luca.ceresoli@bootlin.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-20Input: bcm-keypad - remove redundant of_match_ptr()Ruan Jinjie
The driver depends on CONFIG_OF, it is not necessary to use of_match_ptr() here. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20230809101626.2664651-1-ruanjinjie@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-20dt-bindings: input: silead,gsl1680: do not override firmware-name $refKrzysztof Kozlowski
dtschema package defines firmware-name as string-array, so individual bindings should not make it a string but instead just narrow the number of expected firmware file names. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240115182057.1610195-1-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-20Input: remove usage of the deprecated ida_simple_xx() APIChristophe JAILLET
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). Note that the upper limit of ida_simple_get() is exclusive, but the one of ida_alloc_range() is inclusive. So a -1 has been added when needed. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/a885de14beead2cc3c1c946f192b8b178dac696a.1705349930.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-19Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0Hans de Goede
Some devices list 3 Gpio resources in the ACPI resource list for the touchscreen: 1. GpioInt resource pointing to the GPIO used for the interrupt 2. GpioIo resource pointing to the reset GPIO 3. GpioIo resource pointing to the GPIO used for the interrupt Note how the third extra GpioIo resource really is a duplicate of the GpioInt provided info. Ignore this extra GPIO, treating this setup the same as gpio_count == 2 && gpio_int_idx == 0 fixes the touchscreen not working on the Thunderbook Colossus W803 rugged tablet and likely also on the CyberBook_T116K. Reported-by: Maarten van der Schrieck Closes: https://gitlab.com/AdyaAdya/goodix-touchscreen-linux-driver/-/issues/22 Suggested-by: Maarten van der Schrieck Tested-by: Maarten van der Schrieck Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231223141650.10679-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-18Input: synaptics-rmi4 - fail probing if memory allocation for "phys" failsKunwu Chan
While input core can work with input->phys set to NULL userspace might depend on it, so better fail probing if allocation fails. The system must be in a pretty bad shape for it to happen anyway. Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Link: https://lore.kernel.org/r/20240117073124.143636-1-chentao@kylinos.cn Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-18Input: navpoint - remove driverDuje Mihanović
This driver does not use the SPI core as it should, instead tampering with the SSP registers manually. Refactoring the driver is almost certainly not worth it as the hardware seems to have been designed for and used only in the HP iPAQ hx4700 removed more than a year ago in d6df7df7ae5a ("ARM: pxa: remove unused board files"), so let's remove it. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Link: https://lore.kernel.org/r/20240116-navpoint-removal-v2-2-e566806f1009@skole.hr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-16Input: atkbd - use ab83 as id when skipping the getid commandHans de Goede
Barnabás reported that the change to skip the getid command when the controller is in translated mode on laptops caused the Version field of his "AT Translated Set 2 keyboard" input device to change from ab83 to abba, breaking a custom hwdb entry for this keyboard. Use the standard ab83 id for keyboards when getid is skipped (rather then that getid fails) to avoid reporting a different Version to userspace then before skipping the getid. Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Reported-by: Barnabás Pőcze <pobrn@protonmail.com> Closes: https://lore.kernel.org/linux-input/W1ydwoG2fYv85Z3C3yfDOJcVpilEvGge6UGa9kZh8zI2-qkHXp7WLnl2hSkFz63j-c7WupUWI5TLL6n7Lt8DjRuU-yJBwLYWrreb1hbnd6A=@protonmail.com/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240116204325.7719-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-13Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 6.8 merge window.
2024-01-09Input: driver for Adafruit Seesaw GamepadAnshul Dalal
Adds a driver for a mini gamepad that communicates over i2c, the gamepad has bidirectional thumb stick input and six buttons. The gamepad chip utilizes the open framework from Adafruit called 'Seesaw' to transmit the ADC data for the joystick and digital pin state for the buttons. I have only implemented the functionality required to receive the thumb stick and button state. Steps in reading the gamepad state over i2c: 1. Reset the registers 2. Set the pin mode of the pins specified by the `BUTTON_MASK` to input `BUTTON_MASK`: A bit-map for the six digital pins internally connected to the joystick buttons. 3. Enable internal pullup resistors for the `BUTTON_MASK` 4. Bulk set the pin state HIGH for `BUTTON_MASK` 5. Poll the device for button and joystick state done by: `seesaw_read_data(struct i2c_client *client, struct seesaw_data *data)` Product page: https://www.adafruit.com/product/5743 Arduino driver: https://github.com/adafruit/Adafruit_Seesaw Driver tested on RPi Zero 2W Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Anshul Dalal <anshulusr@gmail.com> Link: https://lore.kernel.org/r/20240106015111.882325-2-anshulusr@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-09dt-bindings: input: bindings for Adafruit Seesaw GamepadAnshul Dalal
Adds bindings for the Adafruit Seesaw Gamepad. The gamepad functions as an i2c device with the default address of 0x50 and has an IRQ pin that can be enabled in the driver to allow for a rising edge trigger on each button press or joystick movement. Product page: https://www.adafruit.com/product/5743 Arduino driver: https://github.com/adafruit/Adafruit_Seesaw Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Anshul Dalal <anshulusr@gmail.com> Link: https://lore.kernel.org/r/20240106015111.882325-1-anshulusr@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-04Input: da9063_onkey - avoid explicitly setting input's parentDmitry Torokhov
devm_input_allocate_device() already sets parent of the new input device, there's no need to set it up explicitly. Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/ZYOseYfVgg0Ve6Zl@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-04Input: da9063_onkey - avoid using OF-specific APIsDmitry Torokhov
There is nothing OF-specific in the driver, so switch from OF properties helpers to generic device helpers. Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/ZYOsUfKceOFXuCt5@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-01Input: iqs269a - add support for OTP variantsJeff LaBundy
This patch adds support for each available OTP variant of the device. The OTP configuration cannot be read over I2C, so it is derived from a compatible string instead. Early revisions of the D0 order code require their OTP-enabled func- tionality to be manually restored following a soft reset; this patch accommodates this erratum as well. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/ZZMaZbdk6iAKUjlm@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-01dt-bindings: input: iqs269a: Add bindings for OTP variantsJeff LaBundy
This patch adds bindings for the D0 order code of the device. This order code represents an OTP variant that enables a touch-and-hold function in place of slider 1. Also included is the ability to specify the 00 order code (default option with no OTP customization) explicitly. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/ZZMaW9RkQ9bKXOUn@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-01Input: iqs269a - add support for slider gesturesJeff LaBundy
This patch adds support for slider gestures that can be expressed by the device. Each gesture (e.g. tap or hold) can be mapped to a unique keycode for either slider 0 or 1. With this change, raw slider coordinates are reported only if the slider has no keycodes defined. This prevents unwanted mouse cur- sor movement when expressing axial gestures (e.g. swipe) and also eliminates some unnecessary I2C traffic. Different revisions of silicon use different tap and swipe timeout step sizes. Apply an appropriate scaling factor depending on which revision is found. To facilitate this change, store the iqs269_ver_info struct in the driver's private data so that other functions can use it after the driver has probed. Last but not least, a former reserved field in iqs269_ver_info now contains useful information; give it a name (fw_num). Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/ZZMaT46WQq1/Nrsb@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-01-01dt-bindings: input: iqs269a: Add bindings for slider gesturesJeff LaBundy
This patch adds bindings for slider gestures that can be expressed by the device. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/ZZMaPrbSi4IrzwKF@nixie71 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-12-28Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messagesHermes Zhang
commit ae42f9288846 ("gpio: Return EPROBE_DEFER if gc->to_irq is NULL") make gpiod_to_irq() possible to return -EPROBE_DEFER when the racing happens. This causes the following error message to be printed: gpio-keys gpio_keys: Unable to get irq number for GPIO 0, error -517 Fix that by changing dev_err() to dev_err_probe() Signed-off-by: Hermes Zhang <chenhuiz@axis.com> Link: https://lore.kernel.org/r/20231229013657.692600-1-Hermes.Zhang@axis.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-12-24Input: zforce_ts - accept standard touchscreen propertiesAndreas Kemnade
Only driver-specific properties were accepted, change it to use the now-available standard properties. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20231223221213.774868-4-andreas@kemnade.info Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-12-24dt-bindings: touchscreen: neonode,zforce: Use standard propertiesAndreas Kemnade
Enable touchscreen orientation to be specified by using standard properties. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231223221213.774868-3-andreas@kemnade.info Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-12-24dt-bindings: touchscreen: convert neonode,zforce to json-schemaAndreas Kemnade
Convert Neonode infrared touchscreen controller binding to DT schema. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231223221213.774868-2-andreas@kemnade.info Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-12-22Input: soc_button_array - add mapping for airplane mode buttonChristoffer Sandberg
This add a mapping for the airplane mode button on the TUXEDO Pulse Gen3. While it is physically a key it behaves more like a switch, sending a key down on first press and a key up on 2nd press. Therefor the switch event is used here. Besides this behaviour it uses the HID usage-id 0xc6 (Wireless Radio Button) and not 0xc8 (Wireless Radio Slider Switch), but since neither 0xc6 nor 0xc8 are currently implemented at all in soc_button_array this not to standard behaviour is not put behind a quirk for the moment. Signed-off-by: Christoffer Sandberg <cs@tuxedo.de> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://lore.kernel.org/r/20231215171718.80229-1-wse@tuxedocomputers.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-12-22dt-bindings: input: convert drv266x to json-schemaAnshul Dalal
Convert devicetree binding documentation for ti drv2665 and drv2667 haptics driver to json-schema. The previously two separate bindings have been merged into a single drv266x.yaml. Signed-off-by: Anshul Dalal <anshulusr@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231221183109.684325-1-anshulusr@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-12-14Input: da9063 - use dev_err_probe()Biju Das
Replace dev_err()->dev_err_probe() to simplify probe(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20231213214803.9931-4-biju.das.jz@bp.renesas.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-12-14Input: da9063 - drop redundant prints in probe()Biju Das
The memory allocation core code already prints error message in case of OOM. So, drop additional print messages for OOM cases. While at it, input_register_device() is already printing error messages on failure. Drop the redundant print. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20231213214803.9931-3-biju.das.jz@bp.renesas.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-12-14Input: da9063 - simplify obtaining OF match dataBiju Das
Simplify probe() by replacing of_match_node() for retrieving match data by device_get_match_data(). Some minor cleanups: * Remove the trailing comma in the terminator entry for the OF table making code robust against (theoretical) misrebases or other similar things where the new entry goes _after_ the termination without the compiler noticing. * Move OF table near to the user. * Arrange variables in reverse xmas tree order in probe(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20231213214803.9931-2-biju.das.jz@bp.renesas.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-12-13Input: as5011 - convert to GPIO descriptorLinus Walleij
This driver does not have any in-tree users but is passing a legacy GPIO number through platform data. Convert it to use a GPIO descriptor, new users or outoftree users can easily be implemented using GPIO descriptor tables or software nodes. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231129-descriptors-input-v1-4-9433162914a3@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-11 04:03:37 +0000