| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
Fixes the following build warning:
>> drivers/mfd/mt6360-core.c:148:2: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides]
REGMAP_IRQ_REG_LINE(MT6360_CHG_TREG_EVT, 8),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/regmap.h:1191:10: note: expanded from macro 'REGMAP_IRQ_REG_LINE'
[_id] = { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/mfd/mt6360-core.c:124:2: note: previous initialization is here
REGMAP_IRQ_REG_LINE(MT6360_CHG_TREG_EVT, 8),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/regmap.h:1191:10: note: expanded from macro 'REGMAP_IRQ_REG_LINE'
[_id] = { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
non-MIPS platforms
This commit:
818e915fbac5: ("irqchip: Add Loongson HyperTransport Vector support")
Added a MIPS-only driver, but turned on compilation on all other architectures as well:
config LOONGSON_HTVEC
bool "Loongson3 HyperTransport Interrupt Vector Controller"
depends on MACH_LOONGSON64 || COMPILE_TEST
But this driver was never build tested on any other architecture than MIPS:
drivers/irqchip/irq-loongson-htvec.c: In function ‘htvec_irq_dispatch’:
drivers/irqchip/irq-loongson-htvec.c:59:3: error: implicit declaration of function ‘spurious_interrupt’; did you mean ‘smp_reboot_interrupt’? [-Werror=implicit-function-declaration]
Because spurious_interrupt() only exists on MIPS.
So make it MIPS-only.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Use the u64_to_user_ptr(x) kernel macro to correctly cast u64 to void*
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200601065648.8775-2-oded.gabbay@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following smatch error in unmap_device_va():
error: uninitialized symbol 'rc'.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200601065648.8775-1-oded.gabbay@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
QCA6390 memdump VSE sometimes come to bluetooth driver
with wrong sequence number as illustrated as follows:
frame # in dec: frame data in hex
1396: ff fd 01 08 74 05 00 37 8f 14
1397: ff fd 01 08 75 05 00 ff bf 38
1414: ff fd 01 08 86 05 00 fb 5e 4b
1399: ff fd 01 08 77 05 00 f3 44 0a
1400: ff fd 01 08 78 05 00 ca f7 41
it is mistook for controller missing packets, so results
in page fault after overwriting memdump buffer allocated.
Fixed by ignoring QCA6390 sequence number check and
checking buffer space before writing.
Signed-off-by: Zijun Hu <zijuhu@codeaurora.org>
Tested-by: Zijun Hu <zijuhu@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Convert the sdhci-pxa binding to DT schema format using json-schema.
At the same time, fix a couple of issues with the examples discovered by
the validation tool -- a semicolon instead of a comma and wrong node names.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200521091356.2211020-2-lkundrak@v3.sk
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
serdev_device_write()
serdev_device_write() is not appropriate at here because
serdev_device_write_wakeup() is not used to release completion hold
by the former at @write_wakeup member of struct serdev_device_ops.
Fix by using serdev_device_write_buf() instead of serdev_device_write().
Signed-off-by: Zijun Hu <zijuhu@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Clear tuning_done flag while executing tuning to ensure vendor
specific HS400 settings are applied properly when the controller
is re-initialized in HS400 mode.
Without this, re-initialization of the qcom SDHC in HS400 mode fails
while resuming the driver from runtime-suspend or system-suspend.
Fixes: ff06ce417828 ("mmc: sdhci-msm: Add HS400 platform support")
Cc: stable@vger.kernel.org
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Link: https://lore.kernel.org/r/1590678838-18099-1-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Controller ID info got by VSC EDL_PATCH_GETVER is very
important, so improve its log level from DEBUG to INFO.
Signed-off-by: Zijun Hu <zijuhu@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Joe Perches pointed out that we were missing a newline
at the end of two debug messages
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Use pr_fmt to standardize all logging for fs/cifs.
Some logging output had no CIFS: specific prefix.
Now all output has one of three prefixes:
o CIFS:
o CIFS: VFS:
o Root-CIFS:
Miscellanea:
o Convert printks to pr_<level>
o Neaten macro definitions
o Remove embedded CIFS: prefixes from formats
o Convert "illegal" to "invalid"
o Coalesce formats
o Add missing '\n' format terminations
o Consolidate multiple cifs_dbg continuations into single calls
o More consistent use of upper case first word output logging
o Multiline statement argument alignment and wrapping
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In order to handle workloads where it is important to make sure that
a buggy app did not delete content on the drive, the new mount option
"nodelete" allows standard permission checks on the server to work,
but prevents on the client any attempts to unlink a file or delete
a directory on that mount point. This can be helpful when running
a little understood app on a network mount that contains important
content that should not be deleted.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Move some large data structures off the stack and into dynamically
allocated memory in the function smb2_ioctl_query_info
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Move a lot of structures and arrays off the stack and into a dynamically
allocated structure instead.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The target iterator parameter "it" is not used in
reconn_setup_dfs_targets(), so just remove it.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In order to support reconnect to hostnames that resolve to same ip
address, besides relying on the currently set hostname to match DFS
targets, attempt to resolve the targets and then match their addresses
with the reconnected server ip address.
For instance, if we have two hostnames "FOO" and "BAR", and both
resolve to the same ip address, we would be able to handle failover in
DFS paths like
\\FOO\dfs\link1 -> [ \BAZ\share2 (*), \BAR\share1 ]
\\FOO\dfs\link2 -> [ \BAZ\share2 (*), \FOO\share1 ]
so when "BAZ" is no longer accessible, link1 and link2 would get
reconnected despite having different target hostnames.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If we mount a very specific DFS link
\\FS0.FOO.COM\dfs\link -> \FS0\share1, \FS1\share2
where its target list contains NB names ("FS0" & "FS1") rather than
FQDN ones ("FS0.FOO.COM" & "FS1.FOO.COM"), we end up connecting to
\FOO\share1 but server->hostname will have "FOO.COM". The reason is
because both "FS0" and "FS0.FOO.COM" resolve to same IP address and
they share same TCP server connection, but "FS0.FOO.COM" was the first
hostname set -- which is OK.
However, if the echo thread timeouts and we still have a good
connection to "FS0", in cifs_reconnect()
rc = generic_ip_connect(server) -> success
if (rc) {
...
reconn_inval_dfs_target(server, cifs_sb, &tgt_list,
&tgt_it);
...
}
...
it successfully reconnects to "FS0" server but does not set up next
DFS target - which should be the same target server "\FS0\share1" -
and server->hostname remains set to "FS0.FOO.COM" rather than "FS0",
as reconn_inval_dfs_target() would have it set to "FS0" if called
earlier.
Finally, in __smb2_reconnect(), the reconnect of tcons would fail
because tcon->ses->server->hostname (FS0.FOO.COM) does not match DFS
target's hostname (FS0).
Fix that by calling reconn_inval_dfs_target() before
generic_ip_connect() so server->hostname will get updated correctly
prior to reconnecting its tcons in __smb2_reconnect().
With "cifs: handle hostnames that resolve to same ip in failover"
patch
- The above problem would not occur.
- We could save an DNS query to find out that they both resolve to
the same ip address.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The variable rc is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The "nolease" mount option is only supported for SMB2+ mounts.
Fail with appropriate error message if vers=1.0 option is passed.
Signed-off-by: Kenneth D'souza <kdsouza@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This introduces mtdpstore, which is similar to mtdoops but more
powerful. It uses pstore/blk, and aims to store panic and oops logs to
a flash partition, where pstore can later read back and present as files
in the mounted pstore filesystem.
To make mtdpstore work, the "blkdev" of pstore/blk should be set
as MTD device name or MTD device number. For more details, see
Documentation/admin-guide/pstore-blk.rst
This solves a number of issues:
- Work duplication: both of pstore and mtdoops do the same job storing
panic/oops log. They have very similar logic, registering to kmsg
dumper and storing logs to several chunks one by one.
- Layer violations: drivers should provides methods instead of polices.
MTD should provide read/write/erase operations, and allow a higher
level drivers to provide the chunk management, kmsg dump
configuration, etc.
- Missing features: pstore provides many additional features, including
presenting the logs as files, logging dump time and count, and
supporting other frontends like pmsg, console, etc.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-11-keescook@chromium.org/
Link: https://lore.kernel.org/r/1589266715-4168-1-git-send-email-liaoweixiong@allwinnertech.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In order to use arbitrary block devices as a pstore backend, provide a
new module param named "best_effort", which will allow using any block
device, even if it has not provided a panic_write callback.
Link: https://lore.kernel.org/lkml/20200511233229.27745-12-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Add support for non-block devices (e.g. MTD). A non-block driver calls
pstore_blk_register_device() to register iself.
In addition, pstore/zone is updated to handle non-block devices,
where an erase must be done before a write. Without this, there is no
way to remove records stored to an MTD.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-10-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In order to configure itself, the MTD backend needs to be able to query
the current pstore configuration. Introduce pstore_blk_get_config() for
this purpose.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-9-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
One requirement to support MTD devices in pstore/zone is having a
way to declare certain regions as broken. Add this support to
pstore/zone.
The MTD driver should return -ENOMSG when encountering a bad region,
which tells pstore/zone to skip and try the next one.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-8-keescook@chromium.org/
Co-developed-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: //lore.kernel.org/lkml/20200512173801.222666-1-colin.king@canonical.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Another set of changes, including
* many 6 GHz changes, though it's not _quite_ complete
(I left out scanning for now, we're still discussing)
* allow userspace SA-query processing for operating channel
validation
* TX status for control port TX, for AP-side operation
* more per-STA/TID control options
* move to kHz for channels, for future S1G operation
* various other small changes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recomputing the uids, gids, capabilities, and related flags each time a
new bprm->file is set is error prone and unnecessary.
This set of changes splits per_clear temporarily into two separate
variables. This is the last change necessary to ensure that
everything that is computed from brpm->file in bprm->cred is
recomputed every time a new bprm->file is set. Then the code is
refactored to compute bprm->cred from bprm->file when the final
brpm->file is known, removing the need for recomputation entirely.
Doing this in two steps should allow anyone who has problems later to
bisect and tell if it was the semantic change or the refactoring that
caused them problems.
Eric W. Biederman (2):
exec: Add a per bprm->file version of per_clear
exec: Compute file based creds only once
fs/binfmt_misc.c | 2 +-
fs/exec.c | 57 ++++++++++++++++++-------------------------
include/linux/binfmts.h | 9 ++-----
include/linux/lsm_hook_defs.h | 2 +-
include/linux/lsm_hooks.h | 22 +++++++++--------
include/linux/security.h | 9 ++++---
security/commoncap.c | 22 +++++++++--------
security/security.c | 4 +--
8 files changed, 59 insertions(+), 68 deletions(-)
Merge branch 'exec-norecompute-v2' into exec-next
|
|
Yes, staying withing 80 columns is certainly still _preferred_. But
it's not the hard limit that the checkpatch warnings imply, and other
concerns can most certainly dominate.
Increase the default limit to 100 characters. Not because 100
characters is some hard limit either, but that's certainly a "what are
you doing" kind of value and less likely to be about the occasional
slightly longer lines.
Miscellanea:
- to avoid unnecessary whitespace changes in files, checkpatch will no
longer emit a warning about line length when scanning files unless
--strict is also used
- Add a bit to coding-style about alignment to open parenthesis
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A pile of x86 fixes:
- Prevent a memory leak in ioperm which was caused by the stupid
assumption that the exit cleanup is always called for current,
which is not the case when fork fails after taking a reference on
the ioperm bitmap.
- Fix an arithmething overflow in the DMA code on 32bit systems
- Fill gaps in the xstate copy with defaults instead of leaving them
uninitialized
- Revert: "Make __X32_SYSCALL_BIT be unsigned long" as it turned out
that existing user space fails to build"
* tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioperm: Prevent a memory leak when fork fails
x86/dma: Fix max PFN arithmetic overflow on 32 bit systems
copy_xstate_to_kernel(): don't leave parts of destination uninitialized
x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix preventing a crash in NUMA balancing.
The current->mm check is not reliable as the mm might be temporary due
to use_mm() in a kthread. Check for PF_KTHREAD explictly"
* tag 'sched-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Don't NUMA balance for kthreads
|
|
Pull networking fixes from David Miller:
"Another week, another set of bug fixes:
1) Fix pskb_pull length in __xfrm_transport_prep(), from Xin Long.
2) Fix double xfrm_state put in esp{4,6}_gro_receive(), also from Xin
Long.
3) Re-arm discovery timer properly in mac80211 mesh code, from Linus
Lüssing.
4) Prevent buffer overflows in nf_conntrack_pptp debug code, from
Pablo Neira Ayuso.
5) Fix race in ktls code between tls_sw_recvmsg() and
tls_decrypt_done(), from Vinay Kumar Yadav.
6) Fix crashes on TCP fallback in MPTCP code, from Paolo Abeni.
7) More validation is necessary of untrusted GSO packets coming from
virtualization devices, from Willem de Bruijn.
8) Fix endianness of bnxt_en firmware message length accesses, from
Edwin Peer.
9) Fix infinite loop in sch_fq_pie, from Davide Caratti.
10) Fix lockdep splat in DSA by setting lockless TX in netdev features
for slave ports, from Vladimir Oltean.
11) Fix suspend/resume crashes in mlx5, from Mark Bloch.
12) Fix use after free in bpf fmod_ret, from Alexei Starovoitov.
13) ARP retransmit timer guard uses wrong offset, from Hongbin Liu.
14) Fix leak in inetdev_init(), from Yang Yingliang.
15) Don't try to use inet hash and unhash in l2tp code, results in
crashes. From Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
l2tp: add sk_family checks to l2tp_validate_socket
l2tp: do not use inet_hash()/inet_unhash()
net: qrtr: Allocate workqueue before kernel_bind
mptcp: remove msk from the token container at destruction time.
mptcp: fix race between MP_JOIN and close
mptcp: fix unblocking connect()
net/sched: act_ct: add nat mangle action only for NAT-conntrack
devinet: fix memleak in inetdev_init()
virtio_vsock: Fix race condition in virtio_transport_recv_pkt
drivers/net/ibmvnic: Update VNIC protocol version reporting
NFC: st21nfca: add missed kfree_skb() in an error path
neigh: fix ARP retransmit timer guard
bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones
bpf, selftests: Verifier bounds tests need to be updated
bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones
bpf: Fix use-after-free in fmod_ret check
net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()
net/mlx5e: Fix MLX5_TC_CT dependencies
net/mlx5e: Properly set default values when disabling adaptive moderation
net/mlx5e: Fix arch depending casting issue in FEC
...
|
|
As a prelude to implementing asynchronous fileserver operations in the afs
filesystem, rename struct afs_fs_cursor to afs_operation.
This struct is going to form the core of the operation management and is
going to acquire more members in later.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Remove the error argument from afs_protocol_error() as it's always
-EBADMSG.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Set a flag in the call struct to indicate an unmarshalling error rather
than return and handle an error from the decoding of file statuses. This
flag is checked on a successful return from the delivery function.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
afs_vol_interest objects represent the volume IDs currently being accessed
from a fileserver. These hold lists of afs_cb_interest objects that
repesent the superblocks using that volume ID on that server.
When a callback notification from the server telling of a modification by
another client arrives, the volume ID specified in the notification is
looked up in the server's afs_vol_interest list. Through the
afs_cb_interest list, the relevant superblocks can be iterated over and the
specific inode looked up and marked in each one.
Make the following efficiency improvements:
(1) Hold rcu_read_lock() over the entire processing rather than locking it
each time.
(2) Do all the callbacks for each vid together rather than individually.
Each volume then only needs to be looked up once.
(3) afs_vol_interest objects are now stored in an rb_tree rather than a
flat list to reduce the lookup step count.
(4) afs_vol_interest lookup is now done with RCU, but because it's in an
rb_tree which may rotate under us, a seqlock is used so that if it
changes during the walk, we repeat the walk with a lock held.
With this and the preceding patch which adds RCU-based lookups in the inode
cache, target volumes/vnodes can be taken without the need to take any
locks, except on the target itself.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Show more information in /proc/net/afs/servers to make it easier to see
what's going on with the server probing.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
When an AFS client accesses a file, it receives a limited-duration callback
promise that the server will notify it if another client changes a file.
This callback duration can be a few hours in length.
If a client mounts a volume and then an application prevents it from being
unmounted, say by chdir'ing into it, but then does nothing for some time,
the rxrpc_peer record will expire and rxrpc-level keepalive will cease.
If there is NAT or a firewall between the client and the server, the route
back for the server may close after a comparatively short duration, meaning
that attempts by the server to notify the client may then bounce.
The client, however, may (so far as it knows) still have a valid unexpired
promise and will then rely on its cached data and will not see changes made
on the server by a third party until it incidentally rechecks the status or
the promise needs renewal.
To deal with this, the client needs to regularly probe the server. This
has two effects: firstly, it keeps a route open back for the server, and
secondly, it causes the server to disgorge any notifications that got
queued up because they couldn't be sent.
Fix this by adding a mechanism to emit regular probes.
Two levels of probing are made available: Under normal circumstances the
'slow' queue will be used for a fileserver - this just probes the preferred
address once every 5 mins or so; however, if server fails to respond to any
probes, the server will shift to the 'fast' queue from which all its
interfaces will be probed every 30s. When it finally responds, the record
will switch back to the slow queue.
Further notes:
(1) Probing is now no longer driven from the fileserver rotation
algorithm.
(2) Probes are dispatched to all interfaces on a fileserver when that an
afs_server object is set up to record it.
(3) The afs_server object is removed from the probe queues when we start
to probe it. afs_is_probing_server() returns true if it's not listed
- ie. it's undergoing probing.
(4) The afs_server object is added back on to the probe queue when the
final outstanding probe completes, but the probed_at time is set when
we're about to launch a probe so that it's not dependent on the probe
duration.
(5) The timer and the work item added for this must be handed a count on
net->servers_outstanding, which they hand on or release. This makes
sure that network namespace cleanup waits for them.
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Reported-by: Dave Botsch <botsch@cnf.cornell.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Split the usage count on the afs_server struct to have an active count that
registers who's actually using it separately from the reference count on
the object.
This allows a future patch to dispatch polling probes without advancing the
"unuse" time into the future each time we emit a probe, which would
otherwise prevent unused server records from expiring.
Included in this:
(1) The latter part of afs_destroy_server() in which the RCU destruction
of afs_server objects is invoked and the outstanding server count is
decremented is split out into __afs_put_server().
(2) afs_put_server() now calls __afs_put_server() rather then setting the
management timer.
(3) The calls begun by afs_fs_give_up_all_callbacks() and
afs_fs_get_capabilities() can now take a ref on the server record, so
afs_destroy_server() can just drop its ref and needn't wait for the
completion of these calls. They'll put the ref when they're done.
(4) Because of (3), afs_fs_probe_done() no longer needs to wake up
afs_destroy_server() with server->probe_outstanding.
(5) afs_gc_servers can be simplified. It only needs to check if
server->active is 0 rather than playing games with the refcount.
(6) afs_manage_servers() can propose a server for gc if usage == 0 rather
than if ref == 1. The gc is effected by (5).
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The U-version VLDB volume record retrieved by the VL.GetEntryByNameU rpc op
carries a change counter (the serverUnique field) for each fileserver
listed in the record as backing that volume. This is incremented whenever
the registration details for a fileserver change (such as its address
list). Note that the same value will be seen in all UVLDB records that
refer to that fileserver.
This should be checked before calling the VL server to re-query the address
list for a fileserver. If it's the same, there's no point doing the query.
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
When a lookup is done in an AFS directory, the filesystem will speculate
and fetch up to 49 other statuses for files in the same directory and fetch
those as well, turning them into inodes or updating inodes that already
exist.
However, occasionally, a callback break might go missing due to NAT timing
out, but the afs filesystem doesn't then realise that the directory is not
up to date.
Alleviate this by using one of the status slots to check the directory in
which the lookup is being done.
Reported-by: Dave Botsch <botsch@cnf.cornell.edu>
Suggested-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
The user ID value isn't actually much use - and leaks a kernel pointer or a
userspace value - so replace it with the call debug ID, which appears in trace
points.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Map the EACCES error that is produced by some ICMP6 packets to EHOSTUNREACH
when we get them as EACCES has other meanings within a filesystem context.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Make the inode hash table RCU searchable so that searches that want to
access or modify an inode without taking a ref on that inode can do so
without taking the inode hash table lock.
The main thing this requires is some RCU annotation on the list
manipulation operations. Inodes are already freed by RCU in most cases.
Users of this interface must take care as the inode may be still under
construction or may be being torn down around them.
There are at least three instances where this can be of use:
(1) Testing whether the inode number iunique() is going to return is
currently unique (the iunique_lock is still held).
(2) Ext4 date stamp updating.
(3) AFS callback breaking.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
cc: linux-ext4@vger.kernel.org
cc: linux-afs@lists.infradead.org
|
|
ralink_clk_init is only called in arch/mips/ralink/clk.c which isn't
compiled for mt7621. And it doesn't export a proper cpu clock.
Drop this unused function.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
'bootrom_setup()' is only called via 'postcore_initcall'.
It can be marked as __init to save a few bytes of memory.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
When setting the PHY cfg (CQ cmd 0x0601), if the firmware responds
with an EMODE error, software will ignore the error as it simply
means that manageability (ex: BMC) is in control of the link and that
the new setting may not be applied.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
