summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-12-13mfd: Cleanup pcf50633_probe error handlingLars-Peter Clausen
Currently the child devices were not freed if the irq could not be requested. This patch restructures the function, that in case of an error all previously allocated resources are freed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Staticise __adp5520_ack_bits()Mark Brown
The function is not exported as the __ indicates. __ Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: fix undefined twl4030-power resconfig value checksAaro Koskinen
The code tries to skip values initialized with -1, but since the values are unsigned the comparison is always true. The patch eliminates the following compiler warnings: drivers/mfd/twl4030-power.c: In function 'twl4030_configure_resource': drivers/mfd/twl4030-power.c:338: warning: comparison is always true due to limited range of data type drivers/mfd/twl4030-power.c:358: warning: comparison is always true due to limited range of data type drivers/mfd/twl4030-power.c:363: warning: comparison is always true due to limited range of data type Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Add support for remapping twl4030-power power statesAmit Kucheria
The <RESOURCE>_REMAP register allows configuration of the <RESOURCE> in case of a sleep or off transition. Allow this property of resources to be configured (through twl4030_resconfig) and add code to parse these values to program the registers accordingly. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Add comments for the twl4030-power register and bit layoutAmit Kucheria
Describe how the resource registers are laid out and the various bit-fields in them. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: twl4030-power: Rename DEVGROUP to DEV_GRPAmit Kucheria
Stick to the names used in the reference manual Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Fix pcf50633-regulator drvdata usageLars-Peter Clausen
Currently the pcf50633-regulator driver data is set to the pcf50633 core structure, but the pcf50633-regulator remove handler assumes that it is set to the regulator device. This patch fixes the issue by accessing the pcf506533 core structure through its parent device and setting the driver data to the regulator device. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Use platform_device_add_data to set pcf50633 regulator platform dataLars-Peter Clausen
Platform devices allocated with platform_device_alloc should use platform_device_add_data to set the platform data, because kfree will be called on the platform_data when the device is released. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Fix memleak in pcf50633_client_dev_registerLars-Peter Clausen
Since platform_device_add_data copies the passed data, the allocated subdev_pdata is never freed. A simple fix would be to either free subdev_pdata or put it onto the stack. But since the pcf50633 child devices can rely on beeing children of the pcf50633 core device it's much more elegant to get access to pcf50633 core structure through that link. This allows to get completly rid of pcf5033_subdev_pdata. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Move pcf50633 messages to appropriate log levelsArnaud Patard
IRQs masking/unmasking should be less verbose. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Make pcf50633 suspend/resume belong to i2c_driverLars-Peter Clausen
When not using the i2c suspend/resume callbacks the i2c client resumed before the i2c master. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Disable unnecessary pcf50633 shutdown on lowsysPaul Fertser
On gta02 hardware revision A5 it can actually bring the system down during normal operating conditions so we disable it. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Convert WM835x IRQ handling to use a data tableMark Brown
Rather than open coding individual IRQs in each function which manipulates them store data for IRQs in a table which is then referenced in the users. This is a substantial code shrink and should be a performance win in cases where only a single IRQ goes off at once since instead of reading four of the second level IRQ registers for each interrupt we read only the sub-registers which have had an interrupt flagged. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Split wm8350 IRQ code into a separate fileMark Brown
In preparation for refactoring - it's over 700 lines of well-isolated code and having it in a file by itself makes things more managable. While we're at it make sure that we clean up the IRQ if we fail after acquiring it on init. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13input/keyboard: new driver for ADP5520 MFD PMICsMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Add ADP5520/ADP5501 driverMichael Hennerich
Base driver for Analog Devices ADP5520/ADP5501 MFD PMICs Subdevs: LCD Backlight : drivers/video/backlight/adp5520_bl.c LEDs : drivers/led/leds-adp5520.c GPIO : drivers/gpio/adp5520-gpio.c (ADP5520 only) Keys : drivers/input/keyboard/adp5520-keys.c (ADP5520 only) Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13gpio: adp5520: rename common defines and typosMichael Hennerich
The common adp5520 mfd defines were namespaced to avoid collisions, so update the define used in this driver accordingly. The structs were also renamed to fix a spelling typo. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13backlight: adp5520: rename common defines and typosMichael Hennerich
The common adp5520 mfd defines were namespaced to avoid collisions, so update the define used in this driver accordingly. The structs were also renamed to fix a spelling typo. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Fix 88PM8607 I2C dependencyHaojian Zhuang
88PM8607 depends on I2C and MFD_CORE. Since 88PM8607 is built-in kernel, it also requires that I2C and MFD_CORE are built-in kernel also. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Move asic3_remove to .devexit.textUwe Kleine-König
The function asic3_remove is used only wrapped by __devexit_p so define it using __devexit. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Add support for WM8320 PMICsMark Brown
The WM8320 is an integrated power management subsystem providing voltage regulators, RTC, watchdog and other functionality. The WM8320 is derived from the WM831x and therefore shares most of the driver code with the WM831x. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13gpiolib: Make WM831x GPIO count dynamicMark Brown
This supports future devices with fewer GPIOs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Refactor WM831x chip identificationMark Brown
Better support future device revisions by moving some of the output around and making the chip ID enumeration be the value expected in the ID register. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Don't abuse i2c_client.nameJean Delvare
The name field of struct i2c_client is for i2c-core's use, it should never be changed by the drivers themselves. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Fix ab4500 compilation warningsSamuel Ortiz
When building the driver as a module, module_exit was missing, and subsys_initcall_sync() is not defined. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: add AB4500 driverSrinidhi Kasagar
This adds core driver support for AB4500 mixed signal multimedia & power management chip. This connects to U8500 on the SSP (pl022) and exports read/write functions for the device to get access to this chip. This also registers the client devices and sets the parent. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Reviewed-by: Mark Brown <broonie@sirena.org.uk> Reviewed-by: Jean-Christophe <plagnioj@jcrosoft.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Add 88PM8607 driverHaojian Zhuang
This adds a core driver for 88PM8607 found in Marvell DKB development platform. This driver is a proxy for all accesses to 88PM8607 sub-drivers which will be merged on top of this one, RTC, regulators, battery and so on. This chip is manufactured by Marvell. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13ksym_tracer: Fix bad castLi Zefan
Fix this warning: kernel/trace/trace_ksym.c: In function 'ksym_trace_filter_read': kernel/trace/trace_ksym.c:239: warning: cast to pointer from integer of different size Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: "K.Prasad" <prasad@linux.vnet.ibm.com> LKML-Reference: <4B1DC578.9020909@cn.fujitsu.com> [remove the strstrip fix as tglx already fixed that] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13tracing/power: Remove two exportsLi Zefan
trace_power_start and trace_power_end are used in arch/x86/kernel/power.c, and this file can't be compiled as a module, so these two tracepoints don't need to be exported. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <4B1DC55F.7060305@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13tracing: Change event->profile_count to be int typeLi Zefan
Like total_profile_count, struct ftrace_event_call::profile_count is protected by event_mutex, so it doesn't need to be atomic_t. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <4B1DC549.5010705@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13tracing: Simplify trace_option_write()Li Zefan
- remove duplicate code inside trace_options_write() - extract duplicate code in trace_options_write() and set_tracer_option() Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <4B1DC532.9010802@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13tracing: Remove useless trace optionLi Zefan
Since commit 4d9493c90f8e6e1b164aede3814010a290161abb ("ftrace: remove add-hoc code"), option "sched-tree" has become useless. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <4B1DC50A.7040402@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13tracing: Use seq file for trace_clockLi Zefan
The buffer for the output is as small as 64 bytes, so it'll overflow if we add more clock type. Use seq file instead. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <4B1DC4FB.5030407@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13tracing: Use seq file for trace_optionsLi Zefan
Code simplification for reading trace_options. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-reference: <4B1DC4EF.3090106@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13function-graph: Allow writing the same val to set_graph_functionLi Zefan
# echo 'do_open' > set_graph_function # echo 'do_open' >> set_graph_function bash: echo: write error: Invalid argument Make it valid to write the same value to set_graph_function, which is consistent with set_ftrace_filter interface. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-reference: <4B1DC4E1.1060303@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13ftrace: Call trace_parser_clear() properlyLi Zefan
I found a weird behavior: # echo 'fuse:*' > set_ftrace_filter bash: echo: write error: Invalid argument # cat set_ftrace_filter fuse_dev_fasync fuse_dev_poll fuse_copy_do We should call trace_parser_clear() no matter ftrace_process_regex() returns 0 or -errno, otherwise we will actually take the unaccepted records from ftrace_regex_release(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <4B1DC4D2.3000406@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13ftrace: Return EINVAL when writing invalid val to set_ftrace_filterLi Zefan
Currently it doesn't warn user on invald value: # echo nonexist_symbol > set_ftrace_filter or: # echo 'nonexist_symbol:mod:fuse' > set_ftrace_filter Better make it return failure. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <4B1DC4BF.2070003@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13tracing: Move a printk out of ftrace_raw_reg_event_foo()Li Zefan
Move the printk from each ftrace_raw_reg_event_foo() to its caller ftrace_event_enable_disable(). This avoids each regfunc trace event callbacks to handle a same error report that can be carried from the caller. See how much space this saves: text data bss dec hex filename 5345151 1961864 7103260 14410275 dbe223 vmlinux.o.old 5331487 1961864 7103260 14396611 dbacc3 vmlinux.o Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> LKML-Reference: <4B1DC4AC.802@cn.fujitsu.com> [start cmdline record before calling regfunc to avoid lost window of pid to comm resolution] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13tracing: Pull up calls to trace_define_common_fields()Li Zefan
Call trace_define_common_fields() in event_create_dir() only. This avoids trace events to handle it from their define_fields callbacks and shrinks the kernel code size: text data bss dec hex filename 5346802 1961864 7103260 14411926 dbe896 vmlinux.o.old 5345151 1961864 7103260 14410275 dbe223 vmlinux.o Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jason Baron <jbaron@redhat.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> LKML-Reference: <4B1DC49C.8000107@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13tracing: Extract duplicate ftrace_raw_init_event_foo()Li Zefan
Use a generic trace_event_raw_init() function for all event's raw_init callbacks (but kprobes) instead of defining the same version for each of these. This shrinks the kernel code: text data bss dec hex filename 5355293 1961928 7103260 14420481 dc0a01 vmlinux.o.old 5346802 1961864 7103260 14411926 dbe896 vmlinux.o raw_init can't be removed, because ftrace events and kprobe events use different raw_init callbacks. Though it's possible to totally remove raw_init, I choose to leave it as it is for now. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <4B1DC48C.7080603@cn.fujitsu.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-12-13Merge branch 'devel' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-12-13ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bugRussell King
Anders Grafström reports that footbridge fails to build after 1c4a4f4. Fix this by adding the necessary definitions for __pfn_to_bus and __bus_to_pfn. Reported-by: Anders Grafström <anders.grafstrom@netinsight.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-13ARM: VFP: fix vfp thread init bug and document vfp notifier entry conditionsRussell King
When the VFP notifier is called for flush_thread(), we may be preemptible, meaning we might migrate to another CPU, which means referencing the current CPU number without some form of locking is invalid, and can cause data corruption. For the most cases, this isn't a problem since atomic notifiers are run under rcu lock, which for most configurations results in preemption being disabled - except when the preemptable tree-based rcu implementation is selected. Let's make it safe anyway. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-13ARM: pxa: fix now incorrect reference of skt->irq by using skt->socket.pci_irqEric Miao
commit 66024db removes all other references of skt->irq by using skt->socket.pci_irq, while leaving these two missed. Get them fixed. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-13[ARM] pxa/zeus: default configuration for Arcom Zeus SBC.Marc Zyngier
Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-13[ARM] pxa/zeus: make Viper pcmcia support more generic to support ZeusMarc Zyngier
The Arcom Zeus CF slot requires the same kind of support as the Viper. To avoid code duplication, introduce a platform device that abstracts the differences. This also allows for the removal of the ugly export of viper_cf_rst(). Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-13[ARM] pxa/zeus: basic support for Arcom Zeus SBCMarc Zyngier
Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-13[ARM] pxa/em-x270: fix usb hub power up/reset sequenceIgor Grinberg
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-13spi: fix probe/remove section markingsGrant Likely
Probe/remove functions need to be marked as __devinit and __devexit (not __init an __exit) to prevent trying to run code that has been discarded. This patch fixes the spi_imx driver to mark probe and remove correctly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-13Add OMAP spi100k driverCory Maccarrone
This change adds the OMAP SPI 100k driver created by Fabrice Crohas <fcrohas@gmail.com>. This SPI bus is found on OMAP7xx-series smartphones, and for many, the touchscreen is attached to this bus. The lion's share of the work was done by Fabrice on this driver -- I am merely porting it from the Linwizard project on his behalf. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit (git 2.34.1) at 2025-09-22 20:53:13 +0000