summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-12-02mm: frontswap: invalidate expired data on a dup-store failureWeijie Yang
If a frontswap dup-store failed, it should invalidate the expired page in the backend, or it could trigger some data corruption issue. Such as: 1. use zswap as the frontswap backend with writeback feature 2. store a swap page(version_1) to entry A, success 3. dup-store a newer page(version_2) to the same entry A, fail 4. use __swap_writepage() write version_2 page to swapfile, success 5. zswap do shrink, writeback version_1 page to swapfile 6. version_2 page is overwrited by version_1, data corrupt. This patch fixes this issue by invalidating expired data immediately when meet a dup-store failure. Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-02mm: do not overwrite reserved pages counter at show_mem()Rafael Aquini
Minor fixlet to perform the reserved pages counter aggregation for each node, at show_mem() Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-03Merge branch 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes A few more small fixes for 3.18. * 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: kernel panic in drm_calc_vbltimestamp_from_scanoutpos with 3.18.0-rc6 drm/radeon: Ignore RADEON_GEM_GTT_WC on 32-bit x86 drm/radeon: sync all BOs involved in a CS v2
2014-12-02usbip: fix error handling in stub_probe()Alexey Khoroshilov
If usb_hub_claim_port() fails, no resources are deallocated and if stub_add_files() fails, port is not released. The patch fixes these issues and rearranges error handling code. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Valentina Manea <valentina.manea.m@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02usb: gadget: udc: missing curly bracesDan Carpenter
There were curly braces intended here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02USB: mos7720: delete some unneeded codeDan Carpenter
The "status" is uninitialized so this creates a static checker warning. But it's harmless, we can just delete it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02wusb: replace memset by memzero_explicitJulia Lawall
Memset on a local variable may be removed when it is called just before the variable goes out of scope. Using memzero_explicit defeats this optimization. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; type T; @@ { ... when any T x[...]; ... when any when exists - memset + memzero_explicit (x, -0, ...) ... when != x when strict } // </smpl> This change was suggested by Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02usbip: remove unneeded structureJulia Lawall
Delete a local structure that is only used to be initialized by memset. A semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x,i; @@ { ... when any -struct i x; <+... when != x - memset(&x,...); ...+> } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Valentina Manea <valentina.manea.m@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02usb: xhci: fix comment for PORT_DEV_REMOVELu Baolu
According to xHCI specification, PORT_DEV_REMOVE(bit 30) in PORTSC true means "Device is non-removable". Reported-by: Juro Bystricky <jurobystricky@hotmail.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02xhci: don't use the same variable for stopped and halted rings current TDMathias Nyman
Endpoints halted on errors, and endpoints stopped manually both used the same ep->stopped_td to store the halted or stopped td. this causes confusion and possible races. There is no longer a need to use the ep->stopped_td variable to store the halted TD. A halted endpoint is handled immediately and we can pass it to the handling function directly. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02xhci: clear extra bits from slot context when setting max exit latencyMathias Nyman
If we need to change the max exit latency with a Evaluate Context command, we copy the old output slot context and use it as input context for the command. This also copies the dev_state bits which are supposed to be zero in the input slot context. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02xhci: cleanup finish_td functionMathias Nyman
Remove unnecessary else after return, dropping extra indentation depth. No functional changes. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-03ACPICA: Events: Always modify GPE registers under the GPE lockLv Zheng
It is reported that there are pieces of code invoking acpi_ev_finish_gpe() without holding acpi_gbl_gpe_lock. Since this function will modify GPE register values, there could be races breaking the register modification process. This patch fixes this issue. Lv Zheng. Reported-by: Joe Liu <joe.liu@apple.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-02ext4: fix suboptimal seek_{data,hole} extents traversialDmitry Monakhov
It is ridiculous practice to scan inode block by block, this technique applicable only for old indirect files. This takes significant amount of time for really large files. Let's reuse ext4_fiemap which already traverse inode-tree in most optimal meaner. TESTCASE: ftruncate64(fd, 0); ftruncate64(fd, 1ULL << 40); /* lseek will spin very long time */ lseek64(fd, 0, SEEK_DATA); lseek64(fd, 0, SEEK_HOLE); Original report: https://lkml.org/lkml/2014/10/16/620 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-12-02NFC: NCI: Fix max length of General Bytes in ATR_RESJulien Lefrique
The maximum size of ATR_REQ and ATR_RES is 64 bytes. The maximum number of General Bytes is calculated by the maximum number of data bytes in the ATR_REQ/ATR_RES, substracted by the number of mandatory data bytes. ATR_REQ: 16 mandatory data bytes, giving a maximum of 48 General Bytes. ATR_RES: 17 mandatory data bytes, giving a maximum of 47 General Bytes. Regression introduced in commit a99903ec. Signed-off-by: Julien Lefrique <lefrique@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Fix warning: cast to restricted __le16Christophe Ricard
Fixing: net/nfc/nci/ntf.c:106:31: warning: cast to restricted __le16 message when building with make C=1 CF=-D__CHECK_ENDIAN__ Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: Fix warning "warning: incorrect type in assignment"Christophe Ricard
Fix warnings: net/nfc/llcp_commands.c:421:14: warning: incorrect type in assignment (different base types) net/nfc/llcp_commands.c:421:14: expected unsigned short [unsigned] [usertype] miux net/nfc/llcp_commands.c:421:14: got restricted __be16 net/nfc/llcp_commands.c:477:14: warning: incorrect type in assignment (different base types) net/nfc/llcp_commands.c:477:14: expected unsigned short [unsigned] [usertype] miux net/nfc/llcp_commands.c:477:14: got restricted __be16 Procedure to reproduce: make ARCH=x86_64 allmodconfig make C=1 CF=-D__CHECK_ENDIAN__ Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: st21nfcb: Fix reported errorChristophe Ricard
Report error returned by devm_gpio_request_one instead of -ENODEV. Reported-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: st21nfca: Report error returned by functions instead of -ENODEVChristophe Ricard
Report error returned by devm_gpio_request_one or st21nfca_hci_platform_init instead of -ENODEV. Reported-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: hci: Add specific hci macro to not create a pipeChristophe Ricard
Some pipe are only created by other host (different than the Terminal Host). The pipe values will for example be notified by NFC_HCI_ADM_NOTIFY_PIPE_CREATED. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: Add se_io NFC operandChristophe Ricard
se_io allows to send apdu over the CLF to the embedded Secure Element. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: netlink: Add new netlink command NFC_CMD_ACTIVATE_TARGETChristophe Ricard
Some tag might get deactivated after some read or write tentative. This may happen for example with Mifare Ultralight C tag when trying to read the last 4 blocks (starting block 0x2c) configured as write only. NFC_CMD_ACTIVATE_TARGET will try to reselect the tag in order to detect if it got remove from the field or if it is still present. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Add support for different NCI_DEACTIVATE_TYPEChristophe Ricard
nci_rf_deactivate_req only support NCI_DEACTIVATE_TYPE_IDLE_MODE. In some situation, it might be necessary to be able to support other NCI_DEACTIVATE_TYPE such as NCI_DEACTIVATE_TYPE_SLEEP_MODE in order for example to reactivate the selected target. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Add management for NCI state for machine rf_deactivate_ntfChristophe Ricard
A notification for rf deaction can be IDLE_MODE, SLEEP_MODE, SLEEP_AF_MODE and DISCOVERY. According to each type and the NCI state machine is different (see figure 10 RF Communication State Machine in NCI specification) Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: nci: Add status byte management in case of error.Christophe Ricard
The nci status byte was ignored. In case of tag reading for example, if the tag is removed from the antenna there is no way for the upper layers (aka: stack) to get inform about such event. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02NFC: st21nfcb: Remove useless pr_infoChristophe Ricard
- pr_info in st21nfcb_nci_i2c_disable is not necessary Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-12-02ext4: ext4_inline_data_fiemap should respect callers argumentDmitry Monakhov
Currently ext4_inline_data_fiemap ignores requested arguments (start and len) which may lead endless loop if start != 0. Also fix incorrect extent length determination. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-12-02ext4: prevent fsreentrance deadlock for inline_dataDmitry Monakhov
ext4_da_convert_inline_data_to_extent() invokes grab_cache_page_write_begin(). grab_cache_page_write_begin performs memory allocation, so fs-reentrance should be prohibited because we are inside journal transaction. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-12-02drm/radeon: kernel panic in drm_calc_vbltimestamp_from_scanoutpos with ↵Petr Mladek
3.18.0-rc6 I was unable too boot 3.18.0-rc6 because of the following kernel panic in drm_calc_vbltimestamp_from_scanoutpos(): [drm] Initialized drm 1.1.0 20060810 [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x15D9:0x8080). [drm] register mmio base: 0xC8400000 [drm] register mmio size: 65536 radeon 0000:0b:01.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (16M used) radeon 0000:0b:01.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 16bits DDR [TTM] Zone kernel: Available graphics memory: 3829346 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 16M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] PCI GART of 512M enabled (table at 0x0000000037880000). radeon 0000:0b:01.0: WB disabled radeon 0000:0b:01.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff8800bbbfa000 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] Loading R100 Microcode radeon 0000:0b:01.0: Direct firmware load for radeon/R100_cp.bin failed with error -2 radeon_cp: Failed to load firmware "radeon/R100_cp.bin" [drm:r100_cp_init] *ERROR* Failed to load firmware! radeon 0000:0b:01.0: failed initializing CP (-2). radeon 0000:0b:01.0: Disabling GPU acceleration [drm] radeon: cp finalized BUG: unable to handle kernel NULL pointer dereference at 000000000000025c IP: [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 PGD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc6-4-default #2649 Hardware name: Supermicro X7DB8/X7DB8, BIOS 6.00 07/26/2006 task: ffff880234da2010 ti: ffff880234da4000 task.ti: ffff880234da4000 RIP: 0010:[<ffffffff8150423b>] [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 RSP: 0000:ffff880234da7918 EFLAGS: 00010086 RAX: ffffffff81557890 RBX: 0000000000000000 RCX: ffff880234da7a48 RDX: ffff880234da79f4 RSI: 0000000000000000 RDI: ffff880232e15000 RBP: ffff880234da79b8 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000000a R11: 0000000000000001 R12: ffff880232dda1c0 R13: ffff880232e1518c R14: 0000000000000292 R15: ffff880232e15000 FS: 0000000000000000(0000) GS:ffff88023fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000000025c CR3: 0000000002014000 CR4: 00000000000007e0 Stack: ffff880234da79d8 0000000000000286 ffff880232dcbc00 0000000000002480 ffff880234da7958 0000000000000296 ffff880234da7998 ffffffff8151b51d ffff880234da7a48 0000000032dcbeb0 ffff880232dcbc00 ffff880232dcbc58 Call Trace: [<ffffffff8151b51d>] ? drm_vma_offset_remove+0x1d/0x110 [<ffffffff8152dc98>] radeon_get_vblank_timestamp_kms+0x38/0x60 [<ffffffff8152076a>] ? ttm_bo_release_list+0xba/0x180 [<ffffffff81503751>] drm_get_last_vbltimestamp+0x41/0x70 [<ffffffff81503933>] vblank_disable_and_save+0x73/0x1d0 [<ffffffff81106b2f>] ? try_to_del_timer_sync+0x4f/0x70 [<ffffffff81505245>] drm_vblank_cleanup+0x65/0xa0 [<ffffffff815604fa>] radeon_irq_kms_fini+0x1a/0x70 [<ffffffff8156c07e>] r100_init+0x26e/0x410 [<ffffffff8152ae3e>] radeon_device_init+0x7ae/0xb50 [<ffffffff8152d57f>] radeon_driver_load_kms+0x8f/0x210 [<ffffffff81506965>] drm_dev_register+0xb5/0x110 [<ffffffff8150998f>] drm_get_pci_dev+0x8f/0x200 [<ffffffff815291cd>] radeon_pci_probe+0xad/0xe0 [<ffffffff8141a365>] local_pci_probe+0x45/0xa0 [<ffffffff8141b741>] pci_device_probe+0xd1/0x130 [<ffffffff81633dad>] driver_probe_device+0x12d/0x3e0 [<ffffffff8163413b>] __driver_attach+0x9b/0xa0 [<ffffffff816340a0>] ? __device_attach+0x40/0x40 [<ffffffff81631cd3>] bus_for_each_dev+0x63/0xa0 [<ffffffff8163378e>] driver_attach+0x1e/0x20 [<ffffffff81633390>] bus_add_driver+0x180/0x240 [<ffffffff81634914>] driver_register+0x64/0xf0 [<ffffffff81419cac>] __pci_register_driver+0x4c/0x50 [<ffffffff81509bf5>] drm_pci_init+0xf5/0x120 [<ffffffff821dc871>] ? ttm_init+0x6a/0x6a [<ffffffff821dc908>] radeon_init+0x97/0xb5 [<ffffffff810002fc>] do_one_initcall+0xbc/0x1f0 [<ffffffff810e3278>] ? __wake_up+0x48/0x60 [<ffffffff8218e256>] kernel_init_freeable+0x18a/0x215 [<ffffffff8218d983>] ? initcall_blacklist+0xc0/0xc0 [<ffffffff818a78f0>] ? rest_init+0x80/0x80 [<ffffffff818a78fe>] kernel_init+0xe/0xf0 [<ffffffff818c0c3c>] ret_from_fork+0x7c/0xb0 [<ffffffff818a78f0>] ? rest_init+0x80/0x80 Code: 45 ac 0f 88 a8 01 00 00 3b b7 d0 01 00 00 49 89 ff 0f 83 99 01 00 00 48 8b 47 20 48 8b 80 88 00 00 00 48 85 c0 0f 84 cd 01 00 00 <41> 8b b1 5c 02 00 00 41 8b 89 58 02 00 00 89 75 98 41 8b b1 60 RIP [<ffffffff8150423b>] drm_calc_vbltimestamp_from_scanoutpos+0x4b/0x320 RSP <ffff880234da7918> CR2: 000000000000025c ---[ end trace ad2c0aadf48e2032 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 It has helped me to add a NULL pointer check that was suggested at http://lists.freedesktop.org/archives/dri-devel/2014-October/070663.html I am not familiar with the code. But the change looks sane and we need something fast at this stage of 3.18 development. Suggested-by: Helge Deller <deller@gmx.de> Signed-off-by: Petr Mladek <pmladek@suse.cz> Tested-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-12-02drm/radeon: Ignore RADEON_GEM_GTT_WC on 32-bit x86Michel Dänzer
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84627 Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-12-02drm/radeon: sync all BOs involved in a CS v2Christian König
Not just the userspace relocs, otherwise we won't wait for a swapped out page tables to be swapped in again. v2: rebased on Alex current drm-fixes-3.18 Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-02Merge tag 'iwlwifi-next-for-john-2014-12-02' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next "Grumbach, Emmanuel" <emmanuel.grumbach@intel.com> says: "I deprecate here -8.ucode since -9 has been published long ago. Along with that I have a new activity, we have now better infrastructure for firmware debugging. This will allow to have configurable probes insides the firmware. Luca continues his work on NetDetect, this feature is now complete. All the rest is minor fixes here and there." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-12-02ALSA: trident: Deletion of a check before snd_util_memhdr_free()Markus Elfring
The snd_util_memhdr_free() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-02f2fs: more fast lookup for gc_inode listChangman Lee
If there are many inodes that have data blocks in victim segment, it takes long time to find a inode in gc_inode list. Let's use radix_tree to reduce lookup time. Signed-off-by: Changman Lee <cm224.lee@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-12-02sb_edac: Fix typo computing number of banksTony Luck
Code will always think there are 16 banks because of a typo Reported-by: Misha Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-02sb_edac: Add support for Broadwell-DE processorTony Luck
Broadwell-DE is the microserver version of next generation Xeon processors. A whole bunch of new PCIe device ids, but otherwise pretty much the same as Haswell. Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-02sata_fsl: fix error handling of irq_of_parse_and_mapDmitry Torokhov
irq_of_parse_and_map() returns 0 on error (the result is unsigned int), so testing for negative result never works. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-12-02ALSA: echoaudio: Deletion of a check before release_and_free_resource()Markus Elfring
The release_and_free_resource() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-02ALSA: asihpi: Deletion of an unnecessary check before the function call "vfree"Markus Elfring
The vfree() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-02AHCI: Add DeviceIDs for Sunrise Point-LP SATA controllerDevin Ryles
This patch adds DeviceIDs for Sunrise Point-LP. Signed-off-by: Devin Ryles <devin.ryles@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-12-02scsi: set fmt to NULL scsi_extd_sense_format() by defaultDan Carpenter
One of the two callers passes an unintialized pointer as "fmt" and expects it to be set to NULL if there is no format string. Let's make this function work as expected. Fixes: d811b848ebb7 ('scsi: use sdev as argument for sense code printing') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-02ARM: dts: rockchip: Add input voltage supply regulators in pmic for MarsboardRomain Perier
vsys is the core always-on supply of the Marsboard. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-12-02Documentation/email-clients.txt: add info about Claws MailRichard Leitner
Claws Mail GUI client works. The client is available at http://www.claws-mail.org Signed-off-by: Richard Leitner <dev@g0hl1n.net> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2014-12-02ARM: at91: at91rm9200 ST initialization is now DT onlyArnd Bergmann
As at91rm9200 is now DT only, there is no need to keep old entry point in this at91rm9200 System Timer (ST) driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [nicolas.ferre@atmel.com: split patch] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-02ARM: at91: remove old AT91-specific driversArnd Bergmann
GPIO and LED drivers were replaced by generic ones for DT boards. These drivers were remaining: delete them now. Modifications are also done on the corresponding header files. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [nicolas.ferre@atmel.com: split patch] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-02ARM: at91: cleanup initilisation code by removing dead codeArnd Bergmann
The AT91-specific SoC strucutre "struct at91_init_soc" was filled with specific !DT initilisation functions. Now that we got rid of the !DT board file description, remove unneeded functions. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [nicolas.ferre@atmel.com: split patch] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-02ARM: at91/Kconfig: select board files automaticallyArnd Bergmann
An explicit selection option is not needed for board files so now we select the board from SoC option. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [nicolas.ferre@atmel.com: remove option's comments; split patch] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-02dm crypt: use memzero_explicit for on-stack bufferMilan Broz
Use memzero_explicit to cleanup sensitive data allocated on stack to prevent the compiler from optimizing and removing memset() calls. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2014-12-02dm space map metadata: fix sm_bootstrap_get_count()Joe Thornber
Must set 'result' accordingly rather than return it. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-12-02block: fix regression where bio_integrity_process uses wrong bio_vec iteratorDarrick J. Wong
bio integrity handling is broken on a system with LVM layered atop a DIF/DIX SCSI drive because device mapper clones the bio, modifies the clone, and sends the clone to the lower layers for processing. However, the clone bio has bi_vcnt == 0, which means that when the sd driver calls bio_integrity_process to attach DIX data, the for_each_segment_all() call (which uses bi_vcnt) returns immediately and random garbage is sent to the disk on a disk write. The disk of course returns an error. Therefore, teach bio_integrity_process() to use bio_for_each_segment() to iterate the bio_vecs, since the per-bio iterator tracks which bio_vecs are associated with that particular bio. The integrity handling code is effectively part of the "driver" (it's not the bio owner), so it must use the correct iterator function. v2: Fix a compiler warning about abandoned local variables. This patch supersedes "block: bio_integrity_process uses wrong bio_vec iterator". Patch applies against 3.18-rc6. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit (git 2.34.1) at 2025-09-22 14:31:47 +0000