summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-12-28net/mlx5e: IPoIB, Don't allow CQE compression to be turned on by defaultDragos Tatulea
mlx5e_build_nic_params will turn CQE compression on if the hardware capability is enabled and the slow_pci_heuristic condition is detected. As IPoIB doesn't support CQE compression, make sure to disable the feature in the IPoIB profile init. Please note that the feature is not exposed to the user for IPoIB interfaces, so it can't be subsequently turned on. Fixes: b797a684b0dd ("net/mlx5e: Enable CQE compression when PCI is slower than link") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5: Fix RoCE setting at HCA levelShay Drory
mlx5 PF can disable RoCE for its VFs and SFs. In such case RoCE is marked as unsupported on those VFs/SFs. The cited patch added an option for disable (and enable) RoCE at HCA level. However, that commit didn't check whether RoCE is supported on the HCA and enabled user to try and set RoCE to on. Fix it by checking whether the HCA supports RoCE. Fixes: fbfa97b4d79f ("net/mlx5: Disable roce at HCA level") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5: Avoid recovery in probe flowsShay Drory
Currently, recovery is done without considering whether the device is still in probe flow. This may lead to recovery before device have finished probed successfully. e.g.: while mlx5_init_one() is running. Recovery flow is using functionality that is loaded only by mlx5_init_one(), and there is no point in running recovery without mlx5_init_one() finished successfully. Fix it by waiting for probe flow to finish and checking whether the device is probed before trying to perform recovery. Fixes: 51d138c2610a ("net/mlx5: Fix health error state handling") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5: Fix io_eq_size and event_eq_size params validationShay Drory
io_eq_size and event_eq_size params are of param type DEVLINK_PARAM_TYPE_U32. But, the validation callback is addressing them as DEVLINK_PARAM_TYPE_U16. This cause mismatch in validation in big-endian systems, in which values in range were rejected while 268500991 was accepted. Fix it by checking the U32 value in the validation callback. Fixes: 0844fa5f7b89 ("net/mlx5: Let user configure io_eq_size param") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5: Add forgotten cleanup calls into mlx5_init_once() error pathJiri Pirko
There are two cleanup calls missing in mlx5_init_once() error path. Add them making the error path flow to be the same as mlx5_cleanup_once(). Fixes: 52ec462eca9b ("net/mlx5: Add reserved-gids support") Fixes: 7c39afb394c7 ("net/mlx5: PTP code migration to driver core section") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5: E-Switch, properly handle ingress tagged packets on VSTMoshe Shemesh
Fix SRIOV VST mode behavior to insert cvlan when a guest tag is already present in the frame. Previous VST mode behavior was to drop packets or override existing tag, depending on the device version. In this patch we fix this behavior by correctly building the HW steering rule with a push vlan action, or for older devices we ask the FW to stack the vlan when a vlan is already present. Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes") Fixes: dfcb1ed3c331 ("net/mlx5: E-Switch, Vport ingress/egress ACLs rules for VST mode") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28Revert "arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle ↵Ulf Hansson
state" Due to recent improvements of the cluster idle state support for Qcom based platforms, we are now able to support the deepest cluster idle state. Let's therefore revert the earlier workaround. This reverts commit cadaa773bcf1 ("arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle state"), which is available from v6.1-rc6. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221122123713.65631-1-ulf.hansson@linaro.org
2022-12-28iio:adc:twl6030: Enable measurement of VACAndreas Kemnade
VAC needs to be wired up to produce proper measurements, without this change only near zero values are reported. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Fixes: 1696f36482e7 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20221217221305.671117-1-andreas@kemnade.info Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio: imu: fxos8700: fix ACCEL measurement range selectionCarlos Song
When device is in active mode, it fails to set an ACCEL full-scale range(2g/4g/8g) in FXOS8700_XYZ_DATA_CFG. This is not align with the datasheet, but it is a fxos8700 chip behavior. Keep the device in standby mode before setting ACCEL full-scale range into FXOS8700_XYZ_DATA_CFG in chip initialization phase and setting scale phase. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <carlos.song@nxp.com> Link: https://lore.kernel.org/r/20221208071911.2405922-6-carlos.song@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio: imu: fxos8700: fix IMU data bits returned to user spaceCarlos Song
ACCEL output data registers contain the X-axis, Y-axis, and Z-axis 14-bit left-justified sample data and MAGN output data registers contain the X-axis, Y-axis, and Z-axis 16-bit sample data. The ACCEL raw register output data should be divided by 4 before sent to userspace. Apply a 2 bits signed right shift to the raw data from ACCEL output data register but keep that from MAGN sensor as the origin. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <carlos.song@nxp.com> Link: https://lore.kernel.org/r/20221208071911.2405922-5-carlos.song@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio: imu: fxos8700: fix incomplete ACCEL and MAGN channels readbackCarlos Song
The length of ACCEL and MAGN 3-axis channels output data is 6 byte individually. However block only read 3 bytes data into buffer from ACCEL or MAGN output data registers every time. It causes an incomplete ACCEL and MAGN channels readback. Set correct value count for regmap_bulk_read to get 6 bytes ACCEL and MAGN channels readback. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <carlos.song@nxp.com> Link: https://lore.kernel.org/r/20221208071911.2405922-4-carlos.song@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio: imu: fxos8700: fix swapped ACCEL and MAGN channels readbackCarlos Song
Because ACCEL and MAGN channels data register base address is swapped the accelerometer and magnetometer channels readback is swapped. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <carlos.song@nxp.com> Link: https://lore.kernel.org/r/20221208071911.2405922-3-carlos.song@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio: imu: fxos8700: fix map label of channel type to MAGN sensorCarlos Song
FXOS8700 is an IMU sensor with ACCEL sensor and MAGN sensor. Sensor type is indexed by corresponding channel type in a switch. IIO_ANGL_VEL channel type mapped to MAGN sensor has caused confusion. Fix the mapping label of "IIO_MAGN" channel type instead of "IIO_ANGL_VEL" channel type to MAGN sensor. Fixes: 84e5ddd5c46e ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <carlos.song@nxp.com> Link: https://lore.kernel.org/r/20221208071911.2405922-2-carlos.song@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio:adc:twl6030: Enable measurements of VUSB, VBAT and othersAndreas Kemnade
Some inputs need to be wired up to produce proper measurements, without this change only near zero values are reported. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Fixes: 1696f36482e70 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver") Link: https://lore.kernel.org/r/20221201181635.3522962-1-andreas@kemnade.info Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio: imx8qxp-adc: fix irq flood when call imx8qxp_adc_read_raw()Frank Li
irq flood happen when run cat /sys/bus/iio/devices/iio:device0/in_voltage1_raw imx8qxp_adc_read_raw() { ... enable irq /* adc start */ writel(1, adc->regs + IMX8QXP_ADR_ADC_SWTRIG); ^^^^ trigger irq flood. wait_for_completion_interruptible_timeout(); readl(adc->regs + IMX8QXP_ADR_ADC_RESFIFO); ^^^^ clear irq here. ... } There is only FIFO watermark interrupt at this ADC controller. IRQ line will be assert until software read data from FIFO. So IRQ flood happen during wait_for_completion_interruptible_timeout(). Move FIFO read into irq handle to avoid irq flood. Fixes: 1e23dcaa1a9f ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC") Cc: stable@vger.kernel.org Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Cai Huoqing <cai.huoqing@linux.dev> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20221201140110.2653501-1-Frank.Li@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio: adc: xilinx-ams: fix devm_krealloc() return value checkMarco Pagani
The clang-analyzer reported a warning: "Value stored to 'ret' is never read". Fix the return value check if devm_krealloc() fails to resize ams_channels. Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver") Signed-off-by: Marco Pagani <marpagan@redhat.com> Acked-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20221125113112.219290-1-marpagan@redhat.com Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio: adc: berlin2-adc: Add missing of_node_put() in error pathXiongfeng Wang
of_get_parent() will return a device_node pointer with refcount incremented. We need to use of_node_put() on it when done. Add the missing of_node_put() in the error path of berlin2_adc_probe(); Fixes: 70f1937911ca ("iio: adc: add support for Berlin") Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20221129020316.191731-1-wangxiongfeng2@huawei.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio: adc: stm32-dfsdm: fill module aliasesOlivier Moysan
When STM32 DFSDM driver is built as module, no modalias information is available. This prevents module to be loaded by udev. Add MODULE_DEVICE_TABLE() to fill module aliases. Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Link: https://lore.kernel.org/r/20221202152848.45585-1-olivier.moysan@foss.st.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28ARM: dts: qcom: apq8084-ifc6540: fix overriding SDHCIKrzysztof Kozlowski
While changing node names of APQ8084 SDHCI, the ones in IFC6540 board were not updated leading to disabled and misconfigured SDHCI. Cc: <stable@vger.kernel.org> Fixes: 2477d81901a2 ("ARM: dts: qcom: Fix sdhci node names - use 'mmc@'") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221204084614.12193-1-krzysztof.kozlowski@linaro.org
2022-12-28nvme-auth: fix smatch warning complaintsSagi Grimberg
When initializing auth context, there may be no secrets passed by the user. Make return code explicit when returning successfully. smatch warnings: drivers/nvme/host/auth.c:950 nvme_auth_init_ctrl() warn: missing error code? 'ret' Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-12-28nvme: consult the CSE log page for unprivileged passthroughChristoph Hellwig
Commands like Write Zeros can change the contents of a namespaces without actually transferring data. To protect against this, check the Commands Supported and Effects log is supported by the controller for any unprivileg command passthrough and refuse unprivileged passthrough if the command has any effects that can change data or metadata. Note: While the Commands Support and Effects log page has only been mandatory since NVMe 2.0, it is widely supported because Windows requires it for any command passthrough from userspace. Fixes: e4fbcf32c860 ("nvme: identify-namespace without CAP_SYS_ADMIN") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
2022-12-28nvme: also return I/O command effects from nvme_command_effectsChristoph Hellwig
To be able to use the Commands Supported and Effects Log for allowing unprivileged passtrough, it needs to be corretly reported for I/O commands as well. Return the I/O command effects from nvme_command_effects, and also add a default list of effects for the NVM command set. For other command sets, the Commands Supported and Effects log is required to be present already. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
2022-12-28nvmet: don't defer passthrough commands with trivial effects to the workqueueChristoph Hellwig
Mask out the "Command Supported" and "Logical Block Content Change" bits and only defer execution of commands that have non-trivial effects to the workqueue for synchronous execution. This allows to execute admin commands asynchronously on controllers that provide a Command Supported and Effects log page, and will keep allowing to execute Write commands asynchronously once command effects on I/O commands are taken into account. Fixes: c1fef73f793b ("nvmet: add passthru code to process commands") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
2022-12-28nvmet: set the LBCC bit for commands that modify dataChristoph Hellwig
Write, Write Zeroes, Zone append and a Zone Reset through Zone Management Send modify the logical block content of a namespace, so make sure the LBCC bit is reported for them. Fixes: b5d0b38c0475 ("nvmet: add Command Set Identifier support") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
2022-12-28nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding itChristoph Hellwig
Use NVME_CMD_EFFECTS_CSUPP instead of open coding it and assign a single value to multiple array entries instead of repeated assignments. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
2022-12-28nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definitionChristoph Hellwig
3 << 16 does not generate the correct mask for bits 16, 17 and 18. Use the GENMASK macro to generate the correct mask instead. Fixes: 84fef62d135b ("nvme: check admin passthru command effects") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
2022-12-28docs, nvme: add a feature and quirk policy documentChristoph Hellwig
This adds a document about what specification features are supported by the Linux NVMe driver, and what qualifies for a quirk if an implementation has problems following the specification. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
2022-12-28ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecsTakashi Iwai
The recent code refactoring for HD-audio HDMI codec driver caused a regression on AMD/ATI HDMI codecs; namely, PulseAudioand pipewire don't recognize HDMI outputs any longer while the direct output via ALSA raw access still works. The problem turned out that, after the code refactoring, the driver assumes only the dynamic PCM assignment, and when a PCM stream that still isn't assigned to any pin gets opened, the driver tries to assign any free converter to the PCM stream. This behavior is OK for Intel and other codecs, as they have arbitrary connections between pins and converters. OTOH, on AMD chips that have a 1:1 mapping between pins and converters, this may end up with blocking the open of the next PCM stream for the pin that is tied with the formerly taken converter. Also, with the code refactoring, more PCM streams are exposed than necessary as we assume all converters can be used, while this isn't true for AMD case. This may change the PCM stream assignment and confuse users as well. This patch fixes those problems by: - Introducing a flag spec->static_pcm_mapping, and if it's set, the driver applies the static mapping between pins and converters at the probe time - Limiting the number of PCM streams per pins, too; this avoids the superfluous PCM streams Fixes: ef6f5494faf6 ("ALSA: hda/hdmi: Use only dynamic PCM device allocation") Cc: <stable@vger.kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216836 Co-developed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20221228125714.16329-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-12-28Merge branch 'kvm-late-6.1-fixes' into HEADPaolo Bonzini
x86: * several fixes to nested VMX execution controls * fixes and clarification to the documentation for Xen emulation * do not unnecessarily release a pmu event with zero period * MMU fixes * fix Coverity warning in kvm_hv_flush_tlb() selftests: * fixes for the ucall mechanism in selftests * other fixes mostly related to compilation with clang
2022-12-28KVM: selftests: restore special vmmcall code layout needed by the harnessPaolo Bonzini
Commit 8fda37cf3d41 ("KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall()", 2022-11-21) broke the svm_nested_soft_inject_test because it placed a "pop rbp" instruction after vmmcall. While this is correct and mimics what is done in the VMX case, this particular test expects a ud2 instruction right after the vmmcall, so that it can skip over it in the L1 part of the test. Inline a suitably-modified version of vmmcall() to restore the functionality of the test. Fixes: 8fda37cf3d41 ("KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall()" Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20221130181147.9911-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-28net/sched: fix retpoline wrapper compilation on configs without tc filtersPedro Tammela
Rudi reports a compilation failure on x86_64 when CONFIG_NET_CLS or CONFIG_NET_CLS_ACT is not set but CONFIG_RETPOLINE is set. A misplaced '#endif' was causing the issue. Fixes: 7f0e810220e2 ("net/sched: add retpoline wrapper for tc") Tested-by: Rudi Heitbaum <rudi@heitbaum.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28s390/qeth: convert sysfs snprintf to sysfs_emitXuezhi Zhang
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28Merge branch 'r8169-fixes'David S. Miller
Chunhao Lin says: ==================== r8169: fix dmar pte write access is not set error This series fixes dmar pte write access is not set error. Chunhao Lin (2): r8169: move rtl_wol_enable_rx() and rtl_prepare_power_down() r8169: fix dmar pte write access is not set error v2: -update commit message -adjust the code according to current kernel code v3: -update title and commit message -split the patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28r8169: fix dmar pte write access is not set errorChunhao Lin
When close device, if wol is enabled, rx will be enabled. When open device it will cause rx packet to be dma to the wrong memory address after pci_set_master() and system log will show blow messages. DMAR: DRHD: handling fault status reg 3 DMAR: [DMA Write] Request device [02:00.0] PASID ffffffff fault addr ffdd4000 [fault reason 05] PTE Write access is not set In this patch, driver disable tx/rx when close device. If wol is enabled, only enable rx filter and disable rxdv_gate(if support) to let hardware only receive packet to fifo but not to dma it. Signed-off-by: Chunhao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28r8169: move rtl_wol_enable_rx() and rtl_prepare_power_down()Chunhao Lin
There is no functional change. Moving these two functions for following patch "r8169: fix dmar pte write access is not set error". Signed-off-by: Chunhao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28Merge branch 'ethtool_gert_phy_stats-fixes'David S. Miller
Daniil Tatianin says: ==================== net/ethtool/ioctl: split ethtool_get_phy_stats into multiple helpers This series fixes a potential NULL dereference in ethtool_get_phy_stats while also attempting to refactor/split said function into multiple helpers so that it's easier to reason about what's going on. I've taken Andrew Lunn's suggestions on the previous version of this patch and added a bit of my own. Changes since v1: - Remove an extra newline in the first patch - Move WARN_ON_ONCE into the if check as it already returns the result of the comparison - Actually split ethtool_get_phy_stats instead of attempting to refactor it ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28net/ethtool/ioctl: split ethtool_get_phy_stats into multiple helpersDaniil Tatianin
So that it's easier to follow and make sense of the branching and various conditions. Stats retrieval has been split into two separate functions ethtool_get_phy_stats_phydev & ethtool_get_phy_stats_ethtool. The former attempts to retrieve the stats using phydev & phy_ops, while the latter uses ethtool_ops. Actual n_stats validation & array allocation has been moved into a new ethtool_vzalloc_stats_array helper. This also fixes a potential NULL dereference of ops->get_ethtool_phy_stats where it was getting called in an else branch unconditionally without making sure it was actually present. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28net/ethtool/ioctl: remove if n_stats checks from ethtool_get_phy_statsDaniil Tatianin
Now that we always early return if we don't have any stats we can remove these checks as they're no longer necessary. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28net/ethtool/ioctl: return -EOPNOTSUPP if we have no phy statsDaniil Tatianin
It's not very useful to copy back an empty ethtool_stats struct and return 0 if we didn't actually have any stats. This also allows for further simplification of this function in the future commits. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28MAINTAINERS: update Jie Hai's email addressJie Hai
Signed-off-by: Jie Hai <haijie1@huawei.com> Link: https://lore.kernel.org/r/20221126064938.50685-1-haijie1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dmaengine: ti: k3-udma: Do conditional decrement of UDMA_CHAN_RT_PEER_BCNT_REGJayesh Choudhary
PSIL_EP_NATIVE endpoints may not have PEER registers for BCNT and thus udma_decrement_byte_counters() should not try to decrement these counters. This fixes the issue of crypto IPERF testing where the client side (EVM) hangs without transfer of packets to the server side, seen since this function was added. Fixes: 7c94dcfa8fcf ("dmaengine: ti: k3-udma: Reset UDMA_CHAN_RT byte counters to prevent overflow") Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20221128085005.489964-1-j-choudhary@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28Documentation: kvm: clarify SRCU locking orderPaolo Bonzini
Currently only the locking order of SRCU vs kvm->slots_arch_lock and kvm->slots_lock is documented. Extend this to kvm->lock since Xen emulation got it terribly wrong. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-28dmaengine: idxd: Do not call DMX TX callbacks during workqueue disableReinette Chatre
On driver unload any pending descriptors are flushed and pending DMA descriptors are explicitly completed: idxd_dmaengine_drv_remove() -> drv_disable_wq() -> idxd_wq_free_irq() -> idxd_flush_pending_descs() -> idxd_dma_complete_txd() With this done during driver unload any remaining descriptor is likely stuck and can be dropped. Even so, the descriptor may still have a callback set that could no longer be accessible. An example of such a problem is when the dmatest fails and the dmatest module is unloaded. The failure of dmatest leaves descriptors with dma_async_tx_descriptor::callback pointing to code that no longer exist. This causes a page fault as below at the time the IDXD driver is unloaded when it attempts to run the callback: BUG: unable to handle page fault for address: ffffffffc0665190 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page Fix this by clearing the callback pointers on the transmit descriptors only when workqueue is disabled. Fixes: 403a2e236538 ("dmaengine: idxd: change MSIX allocation based on per wq activation") Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/37d06b772aa7f8863ca50f90930ea2fd80b38fc3.1670452419.git.reinette.chatre@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dmaengine: idxd: Prevent use after free on completion memoryReinette Chatre
On driver unload any pending descriptors are flushed at the time the interrupt is freed: idxd_dmaengine_drv_remove() -> drv_disable_wq() -> idxd_wq_free_irq() -> idxd_flush_pending_descs(). If there are any descriptors present that need to be flushed this flow triggers a "not present" page fault as below: BUG: unable to handle page fault for address: ff391c97c70c9040 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page The address that triggers the fault is the address of the descriptor that was freed moments earlier via: drv_disable_wq()->idxd_wq_free_resources() Fix the use after free by freeing the descriptors after any possible usage. This is done after idxd_wq_reset() to ensure that the memory remains accessible during possible completion writes by the device. Fixes: 63c14ae6c161 ("dmaengine: idxd: refactor wq driver enable/disable operations") Suggested-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/6c4657d9cff0a0a00501a7b928297ac966e9ec9d.1670452419.git.reinette.chatre@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28dmaengine: idxd: Let probe fail when workqueue cannot be enabledReinette Chatre
The workqueue is enabled when the appropriate driver is loaded and disabled when the driver is removed. When the driver is removed it assumes that the workqueue was enabled successfully and proceeds to free allocations made during workqueue enabling. Failure during workqueue enabling does not prevent the driver from being loaded. This is because the error path within drv_enable_wq() returns success unless a second failure is encountered during the error path. By returning success it is possible to load the driver even if the workqueue cannot be enabled and allocations that do not exist are attempted to be freed during driver remove. Some examples of problematic flows: (a) idxd_dmaengine_drv_probe() -> drv_enable_wq() -> idxd_wq_request_irq(): In above flow, if idxd_wq_request_irq() fails then idxd_wq_unmap_portal() is called on error exit path, but drv_enable_wq() returns 0 because idxd_wq_disable() succeeds. The driver is thus loaded successfully. idxd_dmaengine_drv_remove()->drv_disable_wq()->idxd_wq_unmap_portal() Above flow on driver unload triggers the WARN in devm_iounmap() because the device resource has already been removed during error path of drv_enable_wq(). (b) idxd_dmaengine_drv_probe() -> drv_enable_wq() -> idxd_wq_request_irq(): In above flow, if idxd_wq_request_irq() fails then idxd_wq_init_percpu_ref() is never called to initialize the percpu counter, yet the driver loads successfully because drv_enable_wq() returns 0. idxd_dmaengine_drv_remove()->__idxd_wq_quiesce()->percpu_ref_kill(): Above flow on driver unload triggers a BUG when attempting to drop the initial ref of the uninitialized percpu ref: BUG: kernel NULL pointer dereference, address: 0000000000000010 Fix the drv_enable_wq() error path by returning the original error that indicates failure of workqueue enabling. This ensures that the probe fails when an error is encountered and the driver remove paths are only attempted when the workqueue was enabled successfully. Fixes: 1f2bb40337f0 ("dmaengine: idxd: move wq_enable() to device.c") Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/e8d8116e5efa0fd14fadc5adae6ffd319f0e5ff1.1670452419.git.reinette.chatre@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-28KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESETPaolo Bonzini
While KVM_XEN_EVTCHN_RESET is usually called with no vCPUs running, if that happened it could cause a deadlock. This is due to kvm_xen_eventfd_reset() doing a synchronize_srcu() inside a kvm->lock critical section. To avoid this, first collect all the evtchnfd objects in an array and free all of them once the kvm->lock critical section is over and th SRCU grace period has expired. Reported-by: Michal Luczaj <mhal@rbox.co> Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-28virtio_blk: Fix signedness bug in virtblk_prep_rq()Rafael Mendonca
The virtblk_map_data() function returns negative error codes, however, the 'nents' field of vbr->sg_table is an unsigned int, which causes the error handling not to work correctly. Cc: stable@vger.kernel.org Fixes: 0e9911fa768f ("virtio-blk: support mq_ops->queue_rqs()") Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Message-Id: <20221021204126.927603-1-rafaelmendsr@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Suwan Kim <suwan.kim027@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-12-28vdpa_sim_net: should not drop the multicast/broadcast packetCindy Lu
In the receive_filter(), should not drop the packet with the broadcast/multicast address. Add the check for this Signed-off-by: Cindy Lu <lulu@redhat.com> Message-Id: <20221214054306.24145-1-lulu@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-12-28vdpasim: fix memory leak when freeing IOTLBsJason Wang
After commit bda324fd037a ("vdpasim: control virtqueue support"), vdpasim->iommu became an array of IOTLB, so we should clean the mappings of each free one by one instead of just deleting the ranges in the first IOTLB which may leak maps. Fixes: bda324fd037a ("vdpasim: control virtqueue support") Cc: Gautam Dawar <gautam.dawar@xilinx.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221213090717.61529-1-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gautam Dawar <gautam.dawar@amd.com>
2022-12-28vdpa: conditionally fill max max queue pair for statsJason Wang
For the device without multiqueue feature, we will read 0 as max_virtqueue_pairs from the config. So if we fill VDPA_ATTR_DEV_NET_CFG_MAX_VQP with the value we read from the config we will confuse the user. Fixing this by only filling the value when multiqueue is offered by the device so userspace can assume 1 when the attr is not provided. Fixes: 13b00b135665c("vdpa: Add support for querying vendor statistics") Cc: Eli Cohen <elic@nvidia.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220907060110.4511-1-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eli Cohen <elic@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-20 21:54:19 +0000