summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-23staging: vt6656: rxtx.c s_vFillTxKey fill structure vnt_mic_hdrMalcolm Priestley
Replace the pointer offsets with structure of mic_hdr with endian conversion where needed. Replace vFillTxKey argument u8 *pMICHDR with struct vnt_mic_hdr *mic_hdr and fix type of calling functions. An extra check that mic_hdr is not NULL Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23staging: vt6656: desc.h Remove typedef struct tagSMICHDRHead to new ↵Malcolm Priestley
structure in rxtx.h To new structure. typedef struct tagSMICHDRHead -> struct vnt_mic_hdr This is only needed by rxtc.c so moved to rxtx.h The new structure is the same size as the old but contains the members as pointer referenced in rxtx.c s_vFillTxKey u8 id *pMICHDR = 0x59; u8 tx_priority; *((u8 *)(pMICHDR+1)) = 0; // TxPriority u8 mic_addr2[6]; memcpy(pMICHDR+2, &(pMACHeader->addr2[0]), 6); __be32 tsc_47_16; pMICHDR+8 = HIBYTE(HIWORD(pTransmitKey->dwTSC47_16)); pMICHDR+9 = LOBYTE(HIWORD(pTransmitKey->dwTSC47_16)); pMICHDR+10 = HIBYTE(LOWORD(pTransmitKey->dwTSC47_16)); pMICHDR+11 = LOBYTE(LOWORD(pTransmitKey->dwTSC47_16)); __be16 tsc_15_0; pMICHDR+12 = HIBYTE(pTransmitKey->wTSC15_0); pMICHDR+13 = LOBYTE(pTransmitKey->wTSC15_0); __be16 payload_len; pMICHDR+14 = HIBYTE(wPayloadLen); pMICHDR+15 = LOBYTE(wPayloadLen); __be16 hlen; pMICHDR+16 = 0; // HLEN[15:8] pMICHDR+17 = 28; // HLEN[7:0] __le16 frame_control; memcpy(pMICHDR+18, (u8 *)&wValue, 2); // MSKFRACTL u8 addr1[6]; memcpy(pMICHDR+20, &(pMACHeader->addr1[0]), 6); u8 addr2[6]; memcpy(pMICHDR+26, &(pMACHeader->addr2[0]), 6); u8 addr3[6]; memcpy(pMICHDR+32, &(pMACHeader->addr3[0]), 6); __le16 seq_ctrl; memcpy(pMICHDR+38, (u8 *)&wValue, 2); // MSKSEQCTL u8 addr4[6]; memcpy(pMICHDR+40, &(pMACHeader->addr4[0]), 6); u16 packing; /* packing to 48 bytes */ Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23staging: vt6656: rxtx.c endian correct wTimeStampOffMalcolm Priestley
wTimeStampOff needs to be endian corrected Create new function vnt_time_stamp_off to return little endian u16 value. Private variable byPreambleType is common to all calling functions is included. variable rate to set the desired rate. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23staging: vt6656: rxtx.c s_create new function to endian correct uGetTxRsvTime.Malcolm Priestley
We can't endian correct uGetTxRsvTime because it is called by other functions. Create new function to vnt_rxtx_rsvtime_le16 to return little endian u16 value. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23staging: vt6656: s_uGetRTSCTSRsvTime return u16 endian corrected value.Malcolm Priestley
s_uGetRTSCTSRsvTime always needs to be corrected to u16 endian value. Change function to return u16 endian corrected value. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23[SCSI] libiscsi: Exporting new attrs for iscsi session and connection in sysfsAdheer Chandravanshi
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] scsi_transport_iscsi: Exporting new attrs for iscsi session and ↵Adheer Chandravanshi
connection in sysfs Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] MAINTAINERS: Add maintainer info for bnx2iEddie Wai
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] bnx2i: Update version and copyright year 2013Eddie Wai
Old version: 2.7.2.2 New version: 2.7.6.2 Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23staging: gdm724x: Fix typo in commentsMasanari Iida
Correct spelling typo in comments within staging/gdm724x Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23staging: bcm: Fix typo in commentsMasanari Iida
Correct spelling typo in staging/bcm Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23staging: rtl8187se: Remove pt_regs * irq handler parameternavin patidar
struct pt_regs pointer is no longer passed as a irq handler argument. v2: remove rtl8180_interrupt cast to (void *) . Signed-off-by: navin patidar <navinp@cdac.in> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23[SCSI] MAINTAINERS: Update for qla4xxxVikas Chaudhary
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] Return ENODATA on medium errorHannes Reinecke
When a medium error is detected the SCSI stack should return ENODATA to the upper layers. [jejb: fix whitespace error] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23staging: usbip: fix up alignment in long options listAnthony Foiani
Re-align the option lists. Signed-off-by: Anthony Foiani <anthony.foiani@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23staging: usbip: properly handle "-l" / "--log" optionAnthony Foiani
This option is in the long options list, and it's handled in the option processing loop, but the optstring didn't include it. Signed-off-by: Anthony Foiani <anthony.foiani@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23staging: usbip: set usbipd server port via "-t" / "--tcp-port" option.Anthony Foiani
Add an option "-t" / "--tcp-port" to specify the TCP port to listen on. Downcase associated variables as they're no longer constants. Signed-off-by: Anthony Foiani <anthony.foiani@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23staging: usbip: add "-P" / "--pid" option to save usbipd process idAnthony Foiani
Introduce option "-P" / "--pid" to request that usbipd save its PID to a file while running. Signed-off-by: Anthony Foiani <anthony.foiani@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Merge networking fixes from David Miller: 1) Revert Johannes Berg's genetlink locking fix, because it causes regressions. Johannes and Pravin Shelar are working on fixing things properly. 2) Do not drop ipv6 ICMP messages without a redirected header option, they are legal. From Duan Jiong. 3) Missing error return propagation in probing of via-ircc driver. From Alexey Khoroshilov. 4) Do not clear out broadcast/multicast/unicast/WOL bits in r8169 when initializing, from Peter Wu. 5) realtek phy driver programs wrong interrupt status bit, from Giuseppe CAVALLARO. 6) Fix statistics regression in AF_PACKET code, from Willem de Bruijn. 7) Bridge code uses wrong bitmap length, from Toshiaki Makita. 8) SFC driver uses wrong indexes to look up MAC filters, from Ben Hutchings. 9) Don't pass stack buffers into usb control operations in hso driver, from Daniel Gimpelevich. 10) Multiple ipv6 fragmentation headers in one packet is illegal and such packets should be dropped, from Hannes Frederic Sowa. 11) When TCP sockets are "repaired" as part of checkpoint/restart, the timestamp field of SKBs need to be refreshed otherwise RTOs can be wildly off. From Andrey Vagin. 12) Fix memcpy args (uses 'address of pointer' instead of 'pointer') in hostp driver. From Dan Carpenter. 13) nl80211hdr_put() doesn't return an ERR_PTR, but some code believes it does. From Dan Carpenter. 14) Fix regression in wireless SME disconnects, from Johannes Berg. 15) Don't use a stack buffer for DMA in zd1201 USB wireless driver, from Jussi Kivilinna. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) ipv4: expose IPV4_DEVCONF ipv6: handle Redirect ICMP Message with no Redirected Header option be2net: fix disabling TX in be_close() Revert "genetlink: fix family dump race" hso: Fix stack corruption on some architectures hso: Earlier catch of error condition sfc: Fix lookup of default RX MAC filters when steered using ethtool bridge: Use the correct bit length for bitmap functions in the VLAN code packet: restore packet statistics tp_packets to include drops net: phy: rtl8211: fix interrupt on status link change r8169: remember WOL preferences on driver load via-ircc: don't return zero if via_ircc_open() failed macvtap: Ignore tap features when VNET_HDR is off macvtap: Correctly set tap features when IFF_VNET_HDR is disabled. macvtap: simplify usage of tap_features tcp: set timestamps for restored skb-s bnx2x: set VF DMAE when first function has 0 supported VFs bnx2x: Protect against VFs' ndos when SR-IOV is disabled bnx2x: prevent VF benign attentions bnx2x: Consider DCBX remote error ...
2013-08-23Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds
Merge fixes from Andrew Morton: "A few fixes. One is a licensing change and I don't do licensing, so please eyeball that one" Licensing eye-balled. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib/lz4: correct the LZ4 license memcg: get rid of swapaccount leftovers nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error drivers/platform/olpc/olpc-ec.c: initialise earlier
2013-08-23staging: dgap: removes proc.hLidza Louina
This patch removes the proc.h file and removes '#include dgap_proc.h' from headers in the driver. Signed-off-by: Lidza Louina <lidza.louina@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23staging: dgap: removes proc.cLidza Louina
This patch removes proc.c. This code isn't needed anymore because a previous patch removed references to it and because the kernel uses sysfs instead of proc. Signed-off-by: Lidza Louina <lidza.louina@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23lib/lz4: correct the LZ4 licenseRichard Laager
The LZ4 code is listed as using the "BSD 2-Clause License". Signed-off-by: Richard Laager <rlaager@wiktel.com> Acked-by: Kyungsik Lee <kyungsik.lee@lge.com> Cc: Chanho Min <chanho.min@lge.com> Cc: Richard Yao <ryao@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ The 2-clause BSD can be just converted into GPL, but that's rude and pointless, so don't do it - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-23memcg: get rid of swapaccount leftoversMichal Hocko
The swapaccount kernel parameter without any values has been removed by commit a2c8990aed5a ("memsw: remove noswapaccount kernel parameter") but it seems that we didn't get rid of all the left overs. Make sure that menuconfig help text and kernel-parameters.txt are clear about value for the paramter and remove the stalled comment which is not very much useful on its own. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Gergely Risko <gergely@risko.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-23nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP ↵Vyacheslav Dubeyko
error detection Fix the issue with improper counting number of flying bio requests for BIO_EOPNOTSUPP error detection case. The sb_nbio must be incremented exactly the same number of times as complete() function was called (or will be called) because nilfs_segbuf_wait() will call wail_for_completion() for the number of times set to sb_nbio: do { wait_for_completion(&segbuf->sb_bio_event); } while (--segbuf->sb_nbio > 0); Two functions complete() and wait_for_completion() must be called the same number of times for the same sb_bio_event. Otherwise, wait_for_completion() will hang or leak. Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-23nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP ↵Vyacheslav Dubeyko
error Remove double call of bio_put() in nilfs_end_bio_write() for the case of BIO_EOPNOTSUPP error detection. The issue was found by Dan Carpenter and he suggests first version of the fix too. Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-23drivers/platform/olpc/olpc-ec.c: initialise earlierDaniel Drake
Being a low-level component, various drivers (e.g. olpc-battery) assume that it is ok to communicate with the OLPC Embedded Controller during probe. Therefore the OLPC EC driver must be initialised before other drivers try to use it. This was the case until it was recently moved out of arch/x86 and restructured around commits ac2504151f5a ("Platform: OLPC: turn EC driver into a platform_driver") and 85f90cf6ca56 ("x86: OLPC: switch over to using new EC driver on x86"). Use arch_initcall so that olpc-ec is readied earlier, matching the previous behaviour. Fixes a regression introduced in Linux-3.6 where various drivers such as olpc-battery and olpc-xo1-sci failed to load due to an inability to communicate with the EC. The user-visible effect was a lack of battery monitoring, missing ebook/lid switch input devices, etc. Signed-off-by: Daniel Drake <dsd@laptop.org> Cc: Andres Salomon <dilinger@queued.net> Cc: Paul Fox <pgf@laptop.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-23staging: dgap: removes references to proc codeLidza Louina
This patch removes references to proc functions and structs in the code. The kernel uses sysfs instead of proc now. Signed-off-by: Lidza Louina <lidza.louina@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23staging: dgap: removes mgmt.hLidza Louina
This patch removes mgmt.h and the headers that include it of files in dgap. This file isn't needed for the driver to work with the kernel. Signed-off-by: Lidza Louina <lidza.louina@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23staging: dgap: removes mgmt.cLidza Louina
This patch removes mgmt.c. This file isn't needed for the driver to work with the kernel. Signed-off-by: Lidza Louina <lidza.louina@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23staging: dgap: removes references to mgmt codeLidza Louina
This patch removes references to mgmt functions from the code. The files mgmt.c and mgmt.h will be removed in the patches that follow. Signed-off-by: Lidza Louina <lidza.louina@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23[SCSI] return ENOSPC on thin provisioning failureHannes Reinecke
When the thin provisioning hard threshold is reached we should return ENOSPC to inform upper layers about this fact. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] Set hostbyte status in scsi_check_sense()Hannes Reinecke
We should be modifying the host_byte status in scsi_check_sense() directly; this saves us to introduce a special return code for each and every condition. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] Document enhanced error codesHannes Reinecke
Document the various error codes returned on I/O failure. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23cpufreq: tegra: fix the wrong clock nameJoseph Lo
The "cpu" and "pclk_p_cclk" was a virtual clock name that was used in the legacy Tegra clock framework. It was not used after converting to CCF. Fix it as the correct clock name that we are using. Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2013-08-23ata: acpi: rework the ata acpi bind supportAaron Lu
Binding ACPI handle to SCSI device has several drawbacks, namely: 1 During ATA device initialization time, ACPI handle will be needed while SCSI devices are not created yet. So each time ACPI handle is needed, instead of retrieving the handle by ACPI_HANDLE macro, a namespace scan is performed to find the handle for the corresponding ATA device. This is inefficient, and also expose a restriction on calling path not holding any lock. 2 The binding to SCSI device tree makes code complex, while at the same time doesn't bring us any benefit. All ACPI handlings are still done in ATA module, not in SCSI. Rework the ATA ACPI binding code to bind ACPI handle to ATA transport devices(ATA port and ATA device). The binding needs to be done only once, since the ATA transport devices do not go away with hotplug. And due to this, the flush_work call in hotplug handler for ATA bay is no longer needed. Tested on an Intel test platform for binding and runtime power off for ODD(ZPODD) and hard disk; on an ASUS S400C for binding and normal boot and S3, where its SATA port node has _SDD and _GTF control methods when configured as an AHCI controller and its PATA device node has _GTF control method when configured as an IDE controller. SATA PMP binding and ATA hotplug is not tested. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Tested-by: Dirk Griesbach <spamthis@freenet.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-08-23Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-08-23PCI: Disable decoding for BAR sizing only when it was actually enabledZoltan Kiss
We disable BARs while sizing them so we don't cause conflicts with other devices (see 253d2e5498 and bbffe43524). But if device decoding is already disabled before we size the BAR, we don't need to disable it again. [bhelgaas: changelog, add PCI_COMMAND_DECODING_ENABLE for readability] Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-23Merge tag 'asoc-v3.12' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v3.12 - DAPM is now mandatory for CODEC drivers in order to avoid the repeated regressions in the special cases for non-DAPM CODECs and make it easier to integrate with other components on boards. All existing drivers have had some level of DAPM support added. - A lot of cleanups in DAPM plus support for maintaining controls in a specific state while a DAPM widget all contributed by Lars-Peter Clausen. - Core helpers for bitbanged AC'97 reset from Markus Pargmann. - New drivers and support for Analog Devices ADAU1702 and ADAU1401(a), Asahi Kasei Microdevices AK4554, Atmel AT91ASM9x5 and WM8904 based machines, Freescale S/PDIF and SSI AC'97, Renesas R-Car SoCs, Samsung Exynos5420 SoCs, Texas Instruments PCM1681 and PCM1792A and Wolfson Microelectronics WM8997. - Support for building drivers that can support it cross-platform for compile test.
2013-08-23spi/qspi: Add dual/quad spi read supportSourav Poddar
Support for multiple lines in SPI framework has been picked[1]. [1]: http://comments.gmane.org/gmane.linux.kernel.spi.devel/14420 Hence, adapting ti qspi driver to support multiple data lines for read. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-23Merge remote-tracking branch 'spi/topic/quad' into spi-qspiMark Brown
2013-08-23m68k/atari: ARAnyM - Always use physical addresses in NatFeat callsGeert Uytterhoeven
Pointers passed to ARAnyM NatFeat calls should be physical addresses, not virtual addresses. This worked before because on Atari, physical and virtual kernel addresses are the same, as long as normal kernel memory is concerned. Correct the few remaining places where virtual addresses were used. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-08-23m68k: Ignore disabled HSYNC interrupt on Atari for irqs_disabled()Geert Uytterhoeven
When running a multi-platform kernel on Atari, warning messages like the following may be printed: WARNING: at /root/linux-3.10.1/init/main.c:698 do_one_initcall+0x12e/0x13a() initcall param_sysfs_init+0x0/0x1a4 returned with disabled interrupts This is caused by the different definitions of ALLOWINT for Atari and other platforms: #if defined(MACH_ATARI_ONLY) #define ALLOWINT (~0x500) #else #define ALLOWINT (~0x700) #endif On Atari, we want to disable the high-frequency HSYNC interrupt: - On Atari-only kernels, this is handled completely through ALLOWINT, - On multi-platform kernels, this is handled by disabling the HSYNC interrupt from the interrupt handler. However, as in the latter case arch_irqs_disabled_flags() didn't ignore the disabling of the HSYNC interrupt, irqs_disabled() would detect false positives. Ignore the HSYNC interrupt when running on Atari to fix this. For single-platform kernels this test is optimized away by the compiler. Reported-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Thorsten Glaser <tg@debian.org>
2013-08-23spi: sirf: fix error return code in spi_sirfsoc_probe()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-23Merge tag 'drm-intel-fixes-2013-08-23' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just one patch that soaked for quite a bit to fix a resume issue, resulting in gpu hangs (or worse) due to tlb containing garbage. * tag 'drm-intel-fixes-2013-08-23' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Invalidate TLBs for the rings after a reset
2013-08-23pinctrl: rockchip: Simplify for loop iterationAxel Lin
Just return once a match found makes the code simpler and shorter. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23pinctrl: tegra: use pinctrl-utils APIs for mappingLaxman Dewangan
Pin control utility functions provides the function for creating map lists. In place of implementing APIs locally in Tegra pin control driver for creating map lists, use the utility functions. This reduces the code size and avoid duplication. Changes from V1: - Rebased change on top of V1. - Use pinctrl_utils_dt_free_map Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23pinctrl: utils : add support to pass config type in generic util APIsLaxman Dewangan
Add support to pass the config type like GROUP or PIN when using the utils or generic pin configuration APIs. This will make the APIs more generic. Added additional inline APIs such that it can be use directly as callback for the pinctrl_ops. Changes from V1: - Remove separate implementation for pins and group for pinctrl_utils_dt_free_map and improve this function to support both i.e. PINS and GROUPs. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23pinctrl: samsung: Parse pin groups before calling pinctrl_register()Tomasz Figa
Calling pinctrl_register() means that the driver is fully initialized and might accept pinmux/pinconf requests, so pin groups must be parsed before. This patch fixes this problem by moving device tree parsing before call to pinctrl_register(). In addition, this fixes support for hogs on pin controllers handled by pinctrl-samsung driver. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-23pinctrl: palmas: Fix device name in Kconfig textMark Brown
The device family is called Palmas so there should be a 's' on the end of the name. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-13 17:03:09 +0000