summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-04qed: fix ethtool register dumpManish Chopra
To fix a coverity complain, commit d5ac07dfbd2b ("qed: Initialize debug string array") removed "sw-platform" (one of the common global parameters) from the dump as this was used in the dump with an uninitialized string, however it did not reduce the number of common global parameters which caused the incorrect (unable to parse) register dump this patch fixes it with reducing NUM_COMMON_GLOBAL_PARAMS bye one. Cc: stable@vger.kernel.org Cc: Tim Gardner <tim.gardner@canonical.com> Cc: "David S. Miller" <davem@davemloft.net> Fixes: d5ac07dfbd2b ("qed: Initialize debug string array") Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Reviewed-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-04Merge branch 'micrel-lan8814-remove-latencies'David S. Miller
Horatiu Vultur says: ==================== net: phy: micrel: Remove latencies support lan8814 Remove the latencies support both from the PHY driver and from the DT. The IP already has some default latencies values which can be used to get decent results. It has the following values(defined in ns): rx-1000mbit: 429 tx-1000mbit: 201 rx-100mbit: 2346 tx-100mbit: 705 v0->v1: - fix the split of the patches, there was a compiling error between patch 2 and patch 3. --- But to get better results the following values needs to be set: rx-1000mbit: 459 tx-1000mbit: 171 rx-100mbit: 1706 tx-100mbit: 1345 We are proposing to use ethtool to set these latencies, the RFC can be found here[1] ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-04net: phy: micrel: Remove DT option lan8814,ignore-tsHoratiu Vultur
When the PHY and the MAC are capable of doing timestamping, the PHY has priority. Therefore the DT option lan8814,ignore-ts was added such that the PHY will not expose a PHC so then the timestamping was done in the MAC. This is not the correct approach of doing it, therefore remove this. Fixes: ece19502834d84 ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-04net: phy: micrel: Remove latency from driverHoratiu Vultur
Based on the discussions here[1], the PHY driver is the wrong place to set the latencies, therefore remove them. [1] https://lkml.org/lkml/2022/3/4/325 Fixes: ece19502834d84 ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-04dt-bindings: net: micrel: Revert latency support and timestamping checkHoratiu Vultur
Revert latency support from binding. Based on the discussion[1], the DT is the wrong place to have the lantecies for the PHY. [1] https://lkml.org/lkml/2022/3/4/325 Fixes: 2358dd3fd325fc ("dt-bindings: net: micrel: Configure latency values and timestamping check for LAN8814 phy") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-04xfrm: Pass flowi_oif or l3mdev as oif to xfrm_dst_lookupDavid Ahern
The commit referenced in the Fixes tag no longer changes the flow oif to the l3mdev ifindex. A xfrm use case was expecting the flowi_oif to be the VRF if relevant and the change broke that test. Update xfrm_bundle_create to pass oif if set and any potential flowi_l3mdev if oif is not set. Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-04-04mmc: core: Fixup support for writeback-cache for eMMC and SDMichael Wu
During the card initialization process, the mmc core checks whether the eMMC/SD card supports an internal writeback-cache and then enables it inside the card. Unfortunately, this isn't according to what the mmc core reports to the upper block layer. Instead, the writeback-cache support with REQ_FLUSH and REQ_FUA, are being enabled depending on whether the host supports the CMD23 (MMC_CAP_CMD23) and whether an eMMC supports the reliable-write command. This is wrong and it may also sound awkward. In fact, it's a remnant from when both eMMC/SD cards didn't have dedicated commands/support to control the internal writeback-cache. In other words, it was the best we could do at that point in time. To fix the problem, but also without breaking backwards compatibility, let's align the REQ_FLUSH support with whether the writeback-cache became successfully enabled - for both eMMC and SD cards. Cc: stable@kernel.org Fixes: 881d1c25f765 ("mmc: core: Add cache control for eMMC4.5 device") Fixes: 130206a615a9 ("mmc: core: Add support for cache ctrl for SD cards") Depends-on: 97fce126e279 ("mmc: block: Issue a cache flush only when it's enabled") Reviewed-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Michael Wu <michael@allwinnertech.com> Link: https://lore.kernel.org/r/20220331073223.106415-1-michael@allwinnertech.com [Ulf: Re-wrote the commit message] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-04mmc: block: Check for errors after write on SPIChristian Löhle
Introduce a SEND_STATUS check for writes through SPI to not mark an unsuccessful write as successful. Since SPI SD/MMC does not have states, after a write, the card will just hold the line LOW until it is ready again. The driver marks the write therefore as completed as soon as it reads something other than all zeroes. The driver does not distinguish from a card no longer signalling busy and it being disconnected (and the line being pulled-up by the host). This lead to writes being marked as successful when disconnecting a busy card. Now the card is ensured to be still connected by an additional CMD13, just like non-SPI is ensured to go back to TRAN state. While at it and since we already poll for the post-write status anyway, we might as well check for SPIs error bits (any of them). The disconnecting card problem is reproducable for me after continuous write activity and randomly disconnecting, around every 20-50 tries on SPI DS for some card. Fixes: 7213d175e3b6f ("MMC/SD card driver learns SPI") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/76f6f5d2b35543bab3dfe438f268609c@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-04mmc: mmci: stm32: correctly check all elements of sg listYann Gautier
Use sg and not data->sg when checking sg list elements. Else only the first element alignment is checked. The last element should be checked the same way, for_each_sg already set sg to sg_next(sg). Fixes: 46b723dd867d ("mmc: mmci: add stm32 sdmmc variant") Cc: stable@vger.kernel.org Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Link: https://lore.kernel.org/r/20220317111944.116148-2-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-04Revert "mmc: sdhci-xenon: fix annoying 1.8V regulator warning"Pali Rohár
This reverts commit bb32e1987bc55ce1db400faf47d85891da3c9b9f. Commit 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v regulator stabilization") contains proper fix for the issue described in commit bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying 1.8V regulator warning"). Fixes: 8d876bf472db ("mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable") Cc: stable@vger.kernel.org # 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v regulator stabilization") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20220318141441.32329-1-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-04perf: MARVELL_CN10K_DDR_PMU should depend on ARCH_THUNDERGeert Uytterhoeven
The Marvell CN10K DRAM Subsystem (DSS) performance monitor is only present on Marvell CN10K SoCs. Hence add a dependency on ARCH_THUNDER, to prevent asking the user about this driver when configuring a kernel without Cavium Thunder (incl. Marvell CN10K) SoC support, Fixes: 68fa55f0e05c ("perf/marvell: cn10k DDR perf event core ownership") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/18bfd6e1bcf67db7ea656d684a8bbb68261eeb54.1648559364.git.geert+renesas@glider.be Signed-off-by: Will Deacon <will@kernel.org>
2022-04-04perf: qcom_l2_pmu: fix an incorrect NULL check on list iteratorXiaomeng Tong
The bug is here: return cluster; The list iterator value 'cluster' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found. To fix the bug, return 'cluster' when found, otherwise return NULL. Cc: stable@vger.kernel.org Fixes: 21bdbb7102ed ("perf: add qcom l2 cache perf events driver") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220327055733.4070-1-xiam0nd.tong@gmail.com Signed-off-by: Will Deacon <will@kernel.org>
2022-04-04dt-bindings: reset: Add parent "resets" property as optionalKunihiko Hayashi
LD11 mio reset controller has a reset lines from system controller. Add parent "resets" property to fix the following warning. uniphier-ld11-global.dt.yaml: reset: 'resets' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/1648617078-8312-1-git-send-email-hayashi.kunihiko@socionext.com
2022-04-04arm64: Fix comments in macro __init_el2_gicv3Zhiyuan Dai
Fix typo in comment. Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn> Link: https://lore.kernel.org/r/1647831387-3686-1-git-send-email-daizhiyuan@phytium.com.cn Signed-off-by: Will Deacon <will@kernel.org>
2022-04-04arm64: fix typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220318103729.157574-10-Julia.Lawall@inria.fr [will: Squashed in 20220318103729.157574-28-Julia.Lawall@inria.fr] Signed-off-by: Will Deacon <will@kernel.org>
2022-04-04arch/arm64: Fix topology initialization for core schedulingPhil Auld
Arm64 systems rely on store_cpu_topology() to call update_siblings_masks() to transfer the toplogy to the various cpu masks. This needs to be done before the call to notify_cpu_starting() which tells the scheduler about each cpu found, otherwise the core scheduling data structures are setup in a way that does not match the actual topology. With smt_mask not setup correctly we bail on `cpumask_weight(smt_mask) == 1` for !leaders in: notify_cpu_starting() cpuhp_invoke_callback_range() sched_cpu_starting() sched_core_cpu_starting() which leads to rq->core not being correctly set for !leader-rq's. Without this change stress-ng (which enables core scheduling in its prctl tests in newer versions -- i.e. with PR_SCHED_CORE support) causes a warning and then a crash (trimmed for legibility): [ 1853.805168] ------------[ cut here ]------------ [ 1853.809784] task_rq(b)->core != rq->core [ 1853.809792] WARNING: CPU: 117 PID: 0 at kernel/sched/fair.c:11102 cfs_prio_less+0x1b4/0x1c4 ... [ 1854.015210] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 ... [ 1854.231256] Call trace: [ 1854.233689] pick_next_task+0x3dc/0x81c [ 1854.237512] __schedule+0x10c/0x4cc [ 1854.240988] schedule_idle+0x34/0x54 Fixes: 9edeaea1bc45 ("sched: Core-wide rq->lock") Signed-off-by: Phil Auld <pauld@redhat.com> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lore.kernel.org/r/20220331153926.25742-1-pauld@redhat.com Signed-off-by: Will Deacon <will@kernel.org>
2022-04-04reset: tegra-bpmp: Restore Handle errors in BPMP responseSameer Pujar
This reverts following commit 69125b4b9440 ("reset: tegra-bpmp: Revert Handle errors in BPMP response"). The Tegra194 HDA reset failure is fixed by commit d278dc9151a0 ("ALSA: hda/tegra: Fix Tegra194 HDA reset failure"). The temporary revert of original commit c045ceb5a145 ("reset: tegra-bpmp: Handle errors in BPMP response") can be removed now. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/1641995806-15245-1-git-send-email-spujar@nvidia.com
2022-04-04reset: renesas: Check return value of reset_control_deassert()Heiner Kallweit
Deasserting the reset is vital, therefore bail out in case of error. Suggested-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/b2131908-0110-006b-862f-080517f3e2d8@gmail.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2022-04-04dt-bindings: reset: document deprecated HiSilicon propertyDavid Heidelberg
Documenting deprecated property prevents dt-schema validation errors. Signed-off-by: David Heidelberg <david@ixit.cz> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211208184149.99537-1-david@ixit.cz Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2022-04-04arm64: mte: Fix the stack frame size warning in mte_dump_tag_range()Catalin Marinas
With 64K page configurations, the tags array stored on the stack of the mte_dump_tag_range() function is 2048 bytes, triggering a compiler warning when CONFIG_FRAME_WARN is enabled. Switch to a kmalloc() allocation via mte_allocate_tag_storage(). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: 6dd8b1a0b6cb ("arm64: mte: Dump the MTE tags in the core file") Reported-by: kernel test robot <lkp@intel.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220401151356.1674232-1-catalin.marinas@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-04-04Revert "arm64: Change elfcore for_each_mte_vma() to use VMA iterator"Will Deacon
This reverts commit 3a4f7ef4bed5bdc77a1ac8132f9f0650bbcb3eae. Revert this temporary bodge. It only existed to ease integration with the maple tree work for the 5.18 merge window and that doesn't appear to have landed in any case. Signed-off-by: Will Deacon <will@kernel.org>
2022-04-04tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned, part II.Jiri Slaby
The below commit changed types of some hooks in struct psc_ops. It also changed the types of the functions which are referenced in the instances of the above struct. However the commit did so only for CONFIG_PPC_MPC52xx, but not for CONFIG_PPC_MPC512x. This results in build errors like: mpc52xx_uart.c:static unsigned int mpc52xx_psc_raw_tx_rdy(struct uart_port *port) mpc52xx_uart.c:static int mpc512x_psc_raw_tx_rdy(struct uart_port *port) ^^^ mpc52xx_uart.c:static int mpc5125_psc_raw_tx_rdy(struct uart_port *port) ^^^ Therefore, fix the latter case now too. Fixes: 18662a1d8f35 (tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned) Cc: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220404055122.31194-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-04regulator: atc260x: Fix missing active_discharge_on settingAxel Lin
Without active_discharge_on setting, the SWITCH1 discharge enable control is always disabled. Fix it. Fixes: 3b15ccac161a ("regulator: Add regulator driver for ATC260x PMICs") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20220403132235.123727-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04spi: mxic: Fix an error handling path in mxic_spi_probe()Christophe JAILLET
If spi_register_master() fails, we must undo a previous mxic_spi_mem_ecc_probe() call, as already done in the remove function. Fixes: 00360ebae483 ("spi: mxic: Add support for pipelined ECC operations") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/09c81f751241f6ec0bac7a48d4ec814a742e0d17.1648980664.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04spi: rpc-if: Fix RPM imbalance in probe error pathGeert Uytterhoeven
If rpcif_hw_init() fails, Runtime PM is left enabled. Fixes: b04cc0d912eb80d3 ("memory: renesas-rpc-if: Add support for RZ/G2L") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/1c78a1f447d019bb66b6e7787f520ae78821e2ae.1648562287.git.geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: rtq2134: Fix missing active_discharge_on settingAxel Lin
The active_discharge_on setting was missed, so output discharge resistor is always disabled. Fix it. Fixes: 0555d41497de ("regulator: rtq2134: Add support for Richtek RTQ2134 SubPMIC") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20220404022514.449231-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: wm8994: Add an off-on delay for WM8994 variantJonathan Bakker
As per Table 130 of the wm8994 datasheet at [1], there is an off-on delay for LDO1 and LDO2. In the wm8958 datasheet [2], I could not find any reference to it. I could not find a wm1811 datasheet to double-check there, but as no one has complained presumably it works without it. This solves the issue on Samsung Aries boards with a wm8994 where register writes fail when the device is powered off and back-on quickly. [1] https://statics.cirrus.com/pubs/proDatasheet/WM8994_Rev4.6.pdf [2] https://statics.cirrus.com/pubs/proDatasheet/WM8958_v3.5.pdf Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/CY4PR04MB056771CFB80DC447C30D5A31CB1D9@CY4PR04MB0567.namprd04.prod.outlook.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04gpu: ipu-v3: Fix dev_dbg frequency outputLeo Ruan
This commit corrects the printing of the IPU clock error percentage if it is between -0.1% to -0.9%. For example, if the pixel clock requested is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%. But the fixed point math had a flaw and calculated error of 0.2%. Before: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error 0.2% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz After: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error -0.8% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220207151411.5009-1-mark.jonas@de.bosch.com
2022-04-04drm/imx: dw_hdmi-imx: Fix bailout in error cases of probeLiu Ying
In dw_hdmi_imx_probe(), if error happens after dw_hdmi_probe() returns successfully, dw_hdmi_remove() should be called where necessary as bailout. Fixes: c805ec7eb210 ("drm/imx: dw_hdmi-imx: move initialization into probe") Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220128091944.3831256-1-victor.liu@nxp.com
2022-04-04drm/imx: Fix memory leak in imx_pd_connector_get_modesJosé Expósito
Avoid leaking the display mode variable if of_get_drm_display_mode fails. Fixes: 76ecd9c9fb24 ("drm/imx: parallel-display: check return code from of_get_drm_display_mode()") Addresses-Coverity-ID: 1443943 ("Resource leak") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220108165230.44610-1-jose.exposito89@gmail.com
2022-04-04drm/imx: imx-ldb: Check for null pointer after calling kmemdupJiasheng Jiang
As the possible failure of the allocation, kmemdup() may return NULL pointer. Therefore, it should be better to check the return value of kmemdup() and return error if fails. Fixes: dc80d7038883 ("drm/imx-ldb: Add support to drm-bridge") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220105074729.2363657-1-jiasheng@iscas.ac.cn
2022-04-04ARM: vexpress/spc: Avoid negative array index when !SMPKees Cook
When building multi_v7_defconfig+CONFIG_SMP=n, -Warray-bounds exposes a couple negative array index accesses: arch/arm/mach-vexpress/spc.c: In function 've_spc_clk_init': arch/arm/mach-vexpress/spc.c:583:21: warning: array subscript -1 is below array bounds of 'bool[2]' {aka '_Bool[2]'} [-Warray-bounds] 583 | if (init_opp_table[cluster]) | ~~~~~~~~~~~~~~^~~~~~~~~ arch/arm/mach-vexpress/spc.c:556:7: note: while referencing 'init_opp_table' 556 | bool init_opp_table[MAX_CLUSTERS] = { false }; | ^~~~~~~~~~~~~~ arch/arm/mach-vexpress/spc.c:592:18: warning: array subscript -1 is below array bounds of 'bool[2]' {aka '_Bool[2]'} [-Warray-bounds] 592 | init_opp_table[cluster] = true; | ~~~~~~~~~~~~~~^~~~~~~~~ arch/arm/mach-vexpress/spc.c:556:7: note: while referencing 'init_opp_table' 556 | bool init_opp_table[MAX_CLUSTERS] = { false }; | ^~~~~~~~~~~~~~ Skip this logic when built !SMP. Link: https://lore.kernel.org/r/20220331190443.851661-1-keescook@chromium.org Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-04-04firmware: arm_scmi: Remove clear channel call on the TX channelCristian Marussi
On SCMI transports whose channels are based on a shared resource the TX channel area has to be acquired by the agent before placing the desired command into the channel and it will be then relinquished by the platform once the related reply has been made available into the channel. On an RX channel the logic is reversed with the platform acquiring the channel area and the agent reliquishing it once done by calling the scmi_clear_channel() helper. As a consequence, even in case of error, the agent must never try to clear a TX channel from its side: restrict the existing clear channel call on the the reply path only to delayed responses since they are indeed coming from the RX channel. Link: https://lore.kernel.org/r/20220224152404.12877-1-cristian.marussi@arm.com Fixes: e9b21c96181c ("firmware: arm_scmi: Make .clear_channel optional") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-04-04video: fbdev: omap: Make it CCF clk API compatibleJanusz Krzysztofik
OMAP1 LCDC drivers now omit clk_prepare/unprepare() steps, not supported by OMAP1 custom implementation of clock API. However, non-CCF stubs of those functions exist for use on such platforms until converted to CCF. Update the drivers to be compatible with CCF implementation of clock API. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: aty/matrox/...: Prepare cleanup of powerpc's asm/prom.hChristophe Leroy
powerpc's asm/prom.h brings some headers that it doesn't need itself. In order to clean it up, first add missing headers in users of asm/prom.h Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: pm2fb: Fix a kernel-doc formatting issueHaowen Bai
This function had kernel-doc that not used a hash to separate the function name from the one line description. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04linux/fb.h: Spelling s/palette/palette/Geert Uytterhoeven
Fix a misspelling of "palette" in a comment. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: sis: fix potential NULL dereference in sisfb_post_sis300()Haowen Bai
Do no access bios[] if it's NULL. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: pxafb: use if else insteadWang Qing
use if and else instead of consequent if(A) and if (!A) Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: udlfb: properly check endpoint typePavel Skripkin
syzbot reported warning in usb_submit_urb, which is caused by wrong endpoint type. This driver uses out bulk endpoint for communication, so let's check if this endpoint is present and bail out early if not. Fail log: usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 4822 at drivers/usb/core/urb.c:493 usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493 Modules linked in: CPU: 0 PID: 4822 Comm: kworker/0:3 Tainted: G W 5.13.0-syzkaller #0 ... Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493 ... Call Trace: dlfb_submit_urb+0x89/0x160 drivers/video/fbdev/udlfb.c:1969 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315 dlfb_ops_set_par+0x2a3/0x840 drivers/video/fbdev/udlfb.c:1110 dlfb_usb_probe.cold+0x113e/0x1f4a drivers/video/fbdev/udlfb.c:1732 usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396 Fixes: 88e58b1a42f8 ("Staging: add udlfb driver") Reported-and-tested-by: syzbot+53ce4a4246d0fe0fee34@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: of: display_timing: Remove a redundant zeroing of memoryChristophe JAILLET
of_parse_display_timing() already call memset(0) on its 2nd argument, so there is no need to clear it explicitly before calling this function. Use kmalloc() instead of kzalloc() to save a few cycles. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04ata: libata-core: Disable READ LOG DMA EXT for Samsung 840 EVOsChristian Lamparter
Samsung' 840 EVO with the latest firmware (EXT0DB6Q) locks up with the a message: "READ LOG DMA EXT failed, trying PIO" during boot. Initially this was discovered because it caused a crash with the sata_dwc_460ex controller on a WD MyBook Live DUO. The reporter "Tice Rex" which has the unique opportunity that he has two Samsung 840 EVO SSD! One with the older firmware "EXT0BB0Q" which booted fine and didn't expose "READ LOG DMA EXT". But the newer/latest firmware "EXT0DB6Q" caused the headaches. BugLink: https://github.com/openwrt/openwrt/issues/9505 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-04-04ata: sata_dwc_460ex: Fix crash due to OOB writeChristian Lamparter
the driver uses libata's "tag" values from in various arrays. Since the mentioned patch bumped the ATA_TAG_INTERNAL to 32, the value of the SATA_DWC_QCMD_MAX needs to account for that. Otherwise ATA_TAG_INTERNAL usage cause similar crashes like this as reported by Tice Rex on the OpenWrt Forum and reproduced (with symbols) here: | BUG: Kernel NULL pointer dereference at 0x00000000 | Faulting instruction address: 0xc03ed4b8 | Oops: Kernel access of bad area, sig: 11 [#1] | BE PAGE_SIZE=4K PowerPC 44x Platform | CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0 | NIP: c03ed4b8 LR: c03d27e8 CTR: c03ed36c | REGS: cfa59950 TRAP: 0300 Not tainted (5.4.163) | MSR: 00021000 <CE,ME> CR: 42000222 XER: 00000000 | DEAR: 00000000 ESR: 00000000 | GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...] | [..] | NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254 | LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc | Call Trace: | [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable) | [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc | [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524 | [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0 | [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204 | [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130 | [...] This is because sata_dwc_dma_xfer_complete() NULLs the dma_pending's next neighbour "chan" (a *dma_chan struct) in this '32' case right here (line ~735): > hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE; Then the next time, a dma gets issued; dma_dwc_xfer_setup() passes the NULL'd hsdevp->chan to the dmaengine_slave_config() which then causes the crash. With this patch, SATA_DWC_QCMD_MAX is now set to ATA_MAX_QUEUE + 1. This avoids the OOB. But please note, there was a worthwhile discussion on what ATA_TAG_INTERNAL and ATA_MAX_QUEUE is. And why there should not be a "fake" 33 command-long queue size. Ideally, the dw driver should account for the ATA_TAG_INTERNAL. In Damien Le Moal's words: "... having looked at the driver, it is a bigger change than just faking a 33rd "tag" that is in fact not a command tag at all." Fixes: 28361c403683c ("libata: add extra internal command") Cc: stable@kernel.org # 4.18+ BugLink: https://github.com/openwrt/openwrt/issues/9505 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-04-04ata: libata-sff: Fix compilation warning in ata_sff_lost_interrupt()Damien Le Moal
When returning false, ata_sff_altstatus() does not return any status value, resulting in a compilation warning in ata_sff_lost_interrupt() ("uninitialized symbol 'status'"). Fix this by initializing the local variable "status" to 0. Fixes: 03c0e84f9c1e ("ata: libata-sff: refactor ata_sff_altstatus()") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-04-03io_uring: don't check req->file in io_fsync_prep()Jens Axboe
This is a leftover from the really old days where we weren't able to track and error early if we need a file and it wasn't assigned. Kill the check. Cc: stable@vger.kernel.org # v5.15+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-03Linux 5.18-rc1v5.18-rc1Linus Torvalds
2022-04-03Merge tag 'trace-v5.18-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing updates from Steven Rostedt: - Rename the staging files to give them some meaning. Just stage1,stag2,etc, does not show what they are for - Check for NULL from allocation in bootconfig - Hold event mutex for dyn_event call in user events - Mark user events to broken (to work on the API) - Remove eBPF updates from user events - Remove user events from uapi header to keep it from being installed. - Move ftrace_graph_is_dead() into inline as it is called from hot paths and also convert it into a static branch. * tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Move user_events.h temporarily out of include/uapi ftrace: Make ftrace_graph_is_dead() a static branch tracing: Set user_events to BROKEN tracing/user_events: Remove eBPF interfaces tracing/user_events: Hold event_mutex during dyn_event_add proc: bootconfig: Add null pointer check tracing: Rename the staging files for trace_events
2022-04-03Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "A single revert to fix a boot regression seen when clk_put() started dropping rate range requests. It's best to keep various systems booting so we'll kick this out and try again next time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: Drop the rate range on clk_put()"
2022-04-03Merge tag 'x86-urgent-2022-04-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes and updates: - Make the prctl() for enabling dynamic XSTATE components correct so it adds the newly requested feature to the permission bitmap instead of overwriting it. Add a selftest which validates that. - Unroll string MMIO for encrypted SEV guests as the hypervisor cannot emulate it. - Handle supervisor states correctly in the FPU/XSTATE code so it takes the feature set of the fpstate buffer into account. The feature sets can differ between host and guest buffers. Guest buffers do not contain supervisor states. So far this was not an issue, but with enabling PASID it needs to be handled in the buffer offset calculation and in the permission bitmaps. - Avoid a gazillion of repeated CPUID invocations in by caching the values early in the FPU/XSTATE code. - Enable CONFIG_WERROR in x86 defconfig. - Make the X86 defconfigs more useful by adapting them to Y2022 reality" * tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/xstate: Consolidate size calculations x86/fpu/xstate: Handle supervisor states in XSTATE permissions x86/fpu/xsave: Handle compacted offsets correctly with supervisor states x86/fpu: Cache xfeature flags from CPUID x86/fpu/xsave: Initialize offset/size cache early x86/fpu: Remove unused supervisor only offsets x86/fpu: Remove redundant XCOMP_BV initialization x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO x86/config: Make the x86 defconfigs a bit more usable x86/defconfig: Enable WERROR selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
2022-04-03Merge tag 'core-urgent-2022-04-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RT signal fix from Thomas Gleixner: "Revert the RT related signal changes. They need to be reworked and generalized" * tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
generated by cgit (git 2.34.1) at 2025-09-13 16:45:48 +0000