summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-09-27V4L/DVB: IR: fix keys beeing stuck down foreverMaxim Levitsky
The logic in ir_timer_keyup was inverted. In case that values aren't equal, the meaning of the time_is_after_eq_jiffies(ir->keyup_jiffies) is that ir->keyup_jiffies is after the the jiffies or equally that that jiffies are before the the ir->keyup_jiffies which is exactly the situation we want to avoid (that the timeout is in the future) Confusing Eh? Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: IR: fix duty cycle capabilityMaxim Levitsky
Due to typo lirc bridge enabled wrong capability. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: rc-core: increase repeat timeMauro Carvalho Chehab
As reported by Anton Blanchard <anton@samba.org>, double IR events on 2.6.36-rc2 and a DViCO FusionHDTV DVB-T Dual Express are happening: [ 1351.032084] ir_keydown: i2c IR (FusionHDTV): key down event, key 0x0067, scancode 0x0051 [ 1351.281284] ir_keyup: keyup key 0x0067 ie one key down event and one key up event 250ms later. So, we need to increase the repeat timeout, to avoid this bug to hit. As we're doing it at core, this fix is not needed anymore at dib0700 driver. Thanks-to: Anton Blanchard <anton@samba.org> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: Don't identify PV SBTVD Hybrid as a DibCom deviceMauro Carvalho Chehab
As reported by Carlos, Prolink Pixelview SBTVD Hybrid is based on Conexant cx231xx + Fujitsu 86A20S demodulator. However, both shares the same USB ID. So, we need to use USB bcdDevice, in order to properly discover what's the board. We know for sure that bcd 0x100 is used for a dib0700 device, while bcd 0x4001 is used for a cx23102 device. This patch reserves two ranges, the first one from 0x0000-0x3f00 for dib0700, and the second from 0x4000-0x4fff for cx231xx devices. This may need fixes in the future, as we get access to other devices. Thanks-to: Carlos Americo Domiciano <c_domiciano@yahoo.com.br> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: mceusb: add two new ASUS device IDsJarod Wilson
Reported in lirc sf.net tracker and on lirc mailing list Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: gspca - main: Fix a crash of some webcams on ARM archJason Wang
When plugging some webcams on ARM, the system crashes. This is because we alloc buffer for an urb through usb_buffer_alloc, the alloced buffer is already in DMA coherent region, so we should set the flag of this urb to URB_NO_TRANSFER_DMA_MAP, otherwise when we submit this urb, the hcd core will handle this address as an non-DMA address and call dma_map_single/sg to map it. On arm architecture, dma_map_single a DMA coherent address will be catched by a BUG_ON(). Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Jean-François Moine <moinejf@free.fr> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: Fix regression for BeholdTV ColumbusDmitri Belimov
Some time a go our customers wrote me about problem with our TV card BeholdTV Columbus. It's PCMCIA TV card for notebook. As I understand v4l has some regression with autodetect address of tuners. I can set incorrect I2C address and had report about detect tuner. No any TV of course. When I set correct tuner type and I2C address of the tuners all works well. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: saa7164: move dereference under NULL checkDan Carpenter
The original code dereferenced "port" before checking it for NULL. I moved the test down below the check. Also I changed the comparisons a little so people wouldn't get confused and think "port" and "buf" were ints instead of pointers. (Probably that's what lead to this issue in the first place.) There is only one caller for this function and it passes non-NULL pointers, so this is essentially a cleanup rather than a bugfix. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: pvrusb2: remove unneeded NULL checksDan Carpenter
We dereference "maskptr" unconditionally at the start of the function and also inside the call to parse_tlist() towards the end of the function. This function is called from store_val_any() and it always passes a non-NULL pointer. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: opera1: remove unneeded NULL checkDan Carpenter
"fw" is always a non-NULL pointer at this point, and anyway release_firmware() accepts NULL pointers. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: IR: ir-raw-event: null pointer dereferenceDan Carpenter
The original code dereferenced ir->raw after freeing it and setting it to NULL. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: unlock on error pathDan Carpenter
If we return directly here then we miss out on some mutex_unlock()s Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: cx88: Kconfig: Remove EXPERIMENTAL dependency from VIDEO_CX88_ALSAlawrence rust
The cx88-alsa module has been around since January 2006 and has seen no significant changes since September 2007. It is stable in operation and so I believe that the 'experimental' tag is no longer warranted. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: tm6000: depends on IR_CORERandy Dunlap
tm6000 uses IR interfaces, so it should depend on IR_CORE. ERROR: "get_rc_map" [drivers/staging/tm6000/tm6000.ko] undefined! ERROR: "ir_input_unregister" [drivers/staging/tm6000/tm6000.ko] undefined! ERROR: "__ir_input_register" [drivers/staging/tm6000/tm6000.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27Fix pktcdvd ioctl dev_minor range checkDan Rosenberg
The PKT_CTRL_CMD_STATUS device ioctl retrieves a pointer to a pktcdvd_device from the global pkt_devs array. The index into this array is provided directly by the user and is a signed integer, so the comparison to ensure that it falls within the bounds of this array will fail when provided with a negative index. This can be used to read arbitrary kernel memory or cause a crash due to an invalid pointer dereference. This can be exploited by users with permission to open /dev/pktcdvd/control (on many distributions, this is readable by group "cdrom"). Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> [ Rather than add a cast, just make the function take the right type -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-27MN10300: Default config choice GDBSTUB_TTYSM0 should be GDBSTUB_ON_TTYSM0David Howells
The configuration choice for the port on which the GDB stub listens has a default of GDBSTUB_TTYSM0, but this should be GDBSTUB_ON_TTYSM0 to match the option. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-28drm/radeon/kms: add quirk for MSI K9A2GM motherboardAlex Deucher
Board has no digital connectors Reported-by: Andy Walls <awalls@md.metrocast.net> Tested-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-28drm/radeon/kms: fix potential segfault in r600_ioctl_wait_idleAlex Deucher
radeon_gem_wait_idle_ioctl can apparently get called prior to the vram page being set up or even if accel if false, so make sure it's valid before using it. Should fix: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=597636 https://bugs.freedesktop.org/show_bug.cgi?id=29834 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-28drm: Prune GEM vma entriesChris Wilson
Hook the GEM vm open/close ops into the generic drm vm open/close so that the private vma entries are created and destroy appropriately. Fixes the leak of the drm_vma_entries during the lifetime of the filp. Reported-by: Matt Mackall <mpm@selenic.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-28i2c-davinci: Fix race when setting up for TXJon Povey
When setting up to transmit, a race exists between the ISR and i2c_davinci_xfer_msg() trying to load the first byte and adjust counters. This is mostly visible for transmits > 1 byte long. The hardware starts sending immediately that MDR is loaded. IMR trickery doesn't work because if we start sending, finish the first byte and an XRDY event occurs before we load IMR to unmask it, we never get an interrupt, and we timeout. Move the MDR load after DXR,IMR loads to avoid this race without locking. Tested on DM355 connected to Techwell TW2836 and Wolfson WM8985 Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-09-27net/9p: Mount only matching virtio channelsSven Eckelmann
p9_virtio_create will only compare the the channel's tag characters against the device name till the end of the channel's tag but not till the end of the device name. This means that if a user defines channels with the tags foo and foobar then he would mount foo when he requested foonot and may mount foo when he requested foobar. Thus it is necessary to check both string lengths against each other in case of a successful partial string match. Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27de2104x: fix ethtoolOndrej Zary
When the interface is up, using ethtool breaks it because: a) link is put down but media_timer interval is not shortened to NO_LINK b) rxtx is stopped but not restarted Also manual 10baseT-HD (and probably FD too - untested) mode does not work - the link is forced up, packets are transmitted but nothing is received. Changing CSR14 value to match documentation (not disabling link check) fixes this. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27i2c-octeon: Return -ETIMEDOUT in octeon_i2c_wait() on timeoutBernhard Walle
It doesn't make sense to set result to -ETIMEDOUT but return 0 (success) afterwards. Since there's code in octeon_i2c_start() to handle the error, it should be called. Signed-off-by: Bernhard Walle <walle@corscience.de> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-09-27Merge branch 'vhost-net' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-09-27tproxy: check for transparent flag in ip_route_newportsUlrich Weber
as done in ip_route_connect() Signed-off-by: Ulrich Weber <uweber@astaro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27ipv6: add IPv6 to neighbour table overflow warningUlrich Weber
IPv4 and IPv6 have separate neighbour tables, so the warning messages should be distinguishable. [ Add a suitable message prefix on the ipv4 side as well -DaveM ] Signed-off-by: Ulrich Weber <uweber@astaro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27tcp: fix TSO FACK loss marking in tcp_mark_head_lostYuchung Cheng
When TCP uses FACK algorithm to mark lost packets in tcp_mark_head_lost(), if the number of packets in the (TSO) skb is greater than the number of packets that should be marked lost, TCP incorrectly exits the loop and marks no packets lost in the skb. This underestimates tp->lost_out and affects the recovery/retransmission. This patch fargments the skb and marks the correct amount of packets lost. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cxgb3: Turn off RX coalescing for iWARP connections
2010-09-27Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits) ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE ARM: 6408/1: omap: Map only available sram memory ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries ARM: pxa: remove pr_<level> uses of KERN_<level> ARM: pxa168fb: clear enable bit when not active ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configured ARM: pxa168: fix corrected reset vector ARM: pxa: Use PIO for PI2C communication on Palm27x ARM: pxa: Fix Vpac270 gpio_power for MMC ARM: 6401/1: plug a race in the alignment trap handler ARM: 6406/1: at91sam9g45: fix i2c bus speed leds: leds-ns2: fix locking ARM: dove: fix __io() definition to use bus based offset dmaengine: fix interrupt clearing for mv_xor ARM: kirkwood: Unbreak PCIe I/O port ARM: Fix build error when using KCONFIG_CONFIG ARM: 6383/1: Implement phys_mem_access_prot() to avoid attributes aliasing ARM: 6400/1: at91: fix arch_gettimeoffset fallout ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM ...
2010-09-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: net/9p: fix memory handling/allocation in rdma_request()
2010-09-27Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix driver module removal
2010-09-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: TOMOYO: Don't abuse sys_getpid(), sys_getppid()
2010-09-27Merge branch 'drm-intel-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: drm/i915/sdvo: Handle unsupported GET_SUPPORTED_ENHANCEMENTS gracefully drm/i915/sdvo: Cleanup connector on error path drm/i915: Fix 945GM regression in e259befd
2010-09-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: sdhci-s3c: fix NULL ptr access in sdhci_s3c_remove mmc: sdhci-s3c: fix incorrect spinlock usage after merge mmc: MAINTAINERS: add myself as MMC maintainer
2010-09-27Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: pd6729: Fix error path pcmcia: preserve configuration information if request_io fails partly
2010-09-27Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: intel-iommu: Use symbolic values instead of magic numbers in Lenovo w/a intel-iommu: Abort IOMMU setup for igfx if BIOS gave no shadow GTT space
2010-09-27Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/amd-iommu: Fix rounding-bug in __unmap_single x86/amd-iommu: Work around S3 BIOS bug x86/amd-iommu: Set iommu configuration flags in enable-loop x86, setup: Fix earlyprintk=serial,0x3f8,115200 x86, setup: Fix earlyprintk=serial,ttyS0,115200
2010-09-27Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf, x86: Catch spurious interrupts after disabling counters tracing/x86: Don't use mcount in kvmclock.c tracing/x86: Don't use mcount in pvclock.c
2010-09-27mn10300: check __get_user/__put_user results...Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-27mn10300: get rid of set_fs(USER_DS) in sigframe setupAl Viro
It really has no business being there; short of a serious kernel bug we should already have USER_DS at that point. It shouldn't have been done on x86 either... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-27mn10300: ->restart_block.fn needs to be reset on sigreturnAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-27mn10300: prevent double syscall restartsAl Viro
set ->orig_d0 to -1, same as what sigreturn does Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-27mn10300: avoid SIGSEGV delivery loopAl Viro
force_sigsegv() is there for purpose... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-27alpha: __get_user/__put_user results need to be checked...Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-27alpha: switch osf_sigprocmask() to use of sigprocmask()Al Viro
get rid of a useless wrapper, while we are at it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-273c59x: fix regression from patch "Add ethtool WOL support"Jan Beulich
This patch (commit 690a1f2002a3091bd18a501f46c9530f10481463) added a new call site for acpi_set_WOL() without checking that the function is actually suitable to be called via vortex_set_wol+0xcd/0xe0 [3c59x] dev_ethtool+0xa5a/0xb70 dev_ioctl+0x2e0/0x4b0 T.961+0x49/0x50 sock_ioctl+0x47/0x290 do_vfs_ioctl+0x7f/0x340 sys_ioctl+0x80/0xa0 system_call_fastpath+0x16/0x1b i.e. outside of code paths run when the device is not yet enabled or already disabled. In particular, putting the device into D3hot is a pretty bad idea when it was already brought up. Furthermore, all prior callers of the function made sure they're actually dealing with a PCI device, while the newly added one didn't. In the same spirit, the .get_wol handler shouldn't indicate support for WOL for non-PCI devices. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27drm/i915: fix GMCH power reportingJesse Barnes
The IPS driver needs to know the current power consumption of the GMCH in order to make decisions about when to increase or decrease the CPU and/or GPU power envelope. So fix up the divisions to save the results so the numbers are actually correct (contrary to some earlier comments and code, these functions do not modify the first argument and use it for the result). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-09-27RDMA/cxgb3: Turn off RX coalescing for iWARP connectionsSteve Wise
The HW by default has RX coalescing on. For iWARP connections, this causes a 100ms delay in connection establishement due to the ingress MPA Start message being stalled in HW. So explicitly turn RX coalescing off when setting up iWARP connections. This was causing very bad performance for NP64 gather operations using Open MPI, due to the way it sets up connections on larger jobs. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-27ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tileWill Deacon
The PL310 on the ct-ca9x4 tile for the Versatile Express does not need to add additional latency when accessing its cache RAMs. Unfortunately, the boot monitor sets this up for an 8-cycle delay on reads and writes, resulting in greatly reduced memory performance when the L2 cache is enabled. This patch sets the L2 RAM latencies to the correct value of 1 cycle on the ct-ca9x4 tile before enabling the L2 cache. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-27net/9p: fix memory handling/allocation in rdma_request()Davidlohr Bueso
Return -ENOMEM when erroring on kmalloc and fix memory leaks when returning on error. Signed-off-by: Davidlohr Bueso <dave@gnu.org> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-12 21:26:55 +0000