| Age | Commit message (Collapse) | Author |
|---|
|
reload.
To enable HSR / Switch offload, certain configurations are needed.
Currently they are done inside icssg_change_mode(). This function only
gets called if we move from one mode to another without bringing the
links up / down.
Once in HSR / Switch mode, if we bring the links down and bring it back
up again. The callback sequence is,
- emac_ndo_stop()
Firmwares are stopped
- emac_ndo_open()
Firmwares are loaded
In this path icssg_change_mode() doesn't get called and as a result the
configurations needed for HSR / Switch is not done.
To fix this, put all these configurations in a separate function
icssg_enable_fw_offload() and call this from both icssg_change_mode()
and emac_ndo_open()
Fixes: 56375086d093 ("net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20250814105106.1491871-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ppp_fill_forward_path() has two race conditions:
1. The ppp->channels list can change between list_empty() and
list_first_entry(), as ppp_lock() is not held. If the only channel
is deleted in ppp_disconnect_channel(), list_first_entry() may
access an empty head or a freed entry, and trigger a panic.
2. pch->chan can be NULL. When ppp_unregister_channel() is called,
pch->chan is set to NULL before pch is removed from ppp->channels.
Fix these by using a lockless RCU approach:
- Use list_first_or_null_rcu() to safely test and access the first list
entry.
- Convert list modifications on ppp->channels to their RCU variants and
add synchronize_net() after removal.
- Check for a NULL pch->chan before dereferencing it.
Fixes: f6efc675c9dd ("net: ppp: resolve forwarding path for bridge pppoe devices")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20250814012559.3705-2-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Ensure ndo_fill_forward_path() is called with RCU lock held.
Fixes: 2830e314778d ("net: ethernet: mtk-ppe: fix traffic offload with bridged wlan")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20250814012559.3705-1-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There was a similar bug in the past (Bug 217440), which was fixed for
this laptop.
The same issue is occurring again as of kernel v.6.12.2. The symptoms
are very similar - initially audio works but after a warm reboot, the
audio completely disappears until the computer is powered off (there
is no audio output at all).
The issue is also related by caused by a different change now. By
bisecting different kernel versions, I found that reverting
cc3d0b5dd989 in patch_realtek.c[*] restores the sound and it works
fine after the reboot.
[*] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/sound/pci/hda/patch_realtek.c?h=v6.12.2&id=4ed7f16070a8475c088ff423b2eb11ba15eb89b6
[ patch description reformatted by tiwai ]
Fixes: cc3d0b5dd989 ("ALSA: hda/realtek: Update ALC256 depop procedure")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220109
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/5317ca723c82447a938414fcca85cbf5@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add a PCI quirk to enable microphone input on the headphone jack on
the ASUS Zenbook 14 UM3406HA laptop.
This model uses an ALC294 codec with CS35L41 amplifiers over I2C,
and the existing fixup for it did not enable the headset microphone.
A new fix is introduced to get the mic working while keeping the
amplifier settings correct.
Fixes: 61cbc08fdb04 ("ALSA: hda/realtek: Add quirks for ASUS 2024 Zenbooks")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://patch.msgid.link/20250818204243.247297-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ESI/MSI is a performance optimization feature that provides dedicated
interrupts per MCQ hardware queue. This is optional feature and UFS MCQ
should work with and without ESI feature.
Commit e46a28cea29a ("scsi: ufs: qcom: Remove the MSI descriptor abuse")
brings a regression in ESI (Enhanced System Interrupt) configuration that
causes a null pointer dereference when Platform MSI allocation fails.
The issue occurs in when platform_device_msi_init_and_alloc_irqs() in
ufs_qcom_config_esi() fails (returns -EINVAL) but the current code uses
__free() macro for automatic cleanup free MSI resources that were never
successfully allocated.
Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000008
Call trace:
mutex_lock+0xc/0x54 (P)
platform_device_msi_free_irqs_all+0x1c/0x40
ufs_qcom_config_esi+0x1d0/0x220 [ufs_qcom]
ufshcd_config_mcq+0x28/0x104
ufshcd_init+0xa3c/0xf40
ufshcd_pltfrm_init+0x504/0x7d4
ufs_qcom_probe+0x20/0x58 [ufs_qcom]
Fix by restructuring the ESI configuration to try MSI allocation first,
before any other resource allocation and instead use explicit cleanup
instead of __free() macro to avoid cleanup of unallocated resources.
Tested on SM8750 platform with MCQ enabled, both with and without
Platform ESI support.
Fixes: e46a28cea29a ("scsi: ufs: qcom: Remove the MSI descriptor abuse")
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250811073330.20230-1-quic_nitirawa@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The name ufshcd_wait_for_doorbell_clr() refers to legacy mode. Commit
8d077ede48c1 ("scsi: ufs: Optimize the command queueing code") added
support for MCQ mode in this function. Since then the name of this
function is misleading. Hence change the name of this function into
something that is appropriate for both legacy and MCQ mode.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_wait_for_dev_cmd() and all its callers can return an OCS error.
OCS errors are represented by positive integers. Remove the WARN_ONCE()
statements that complain about positive error codes and update the
documentation.
Keep the behavior of ufshcd_wait_for_dev_cmd() because this return value
may end be passed as the second argument of bsg_job_done() and
bsg_job_done() handles positive and negative error codes differently.
Cc: Peter Wang <peter.wang@mediatek.com>
Fixes: cc59f3b68542 ("scsi: ufs: core: Improve return value documentation")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-4-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The UIC completion interrupt may be disabled while an UIC command is
being processed. When the UIC completion interrupt is reenabled, an UIC
interrupt is triggered and the WARN_ON_ONCE(!cmd) statement is hit.
Hence this patch that removes this kernel warning.
Fixes: fcd8b0450a9a ("scsi: ufs: core: Make ufshcd_uic_cmd_compl() easier to analyze")
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service
routine to a threaded IRQ handler") introduced an IRQ lock inversion
issue. Fix this lock inversion by changing the spin_lock_irq() calls into
spin_lock_irqsave() calls in code that can be called either from
interrupt context or from thread context. This patch fixes the following
lockdep complaint:
WARNING: possible irq lock inversion dependency detected
6.12.30-android16-5-maybe-dirty-4k #1 Tainted: G W OE
--------------------------------------------------------
kworker/u28:0/12 just changed the state of lock:
ffffff881e29dd60 (&hba->clk_gating.lock){-...}-{2:2}, at: ufshcd_release_scsi_cmd+0x60/0x110
but this lock took another, HARDIRQ-unsafe lock in the past:
(shost->host_lock){+.+.}-{2:2}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(shost->host_lock);
local_irq_disable();
lock(&hba->clk_gating.lock);
lock(shost->host_lock);
<Interrupt>
lock(&hba->clk_gating.lock);
*** DEADLOCK ***
4 locks held by kworker/u28:0/12:
#0: ffffff8800ac6158 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c
#1: ffffffc085c93d70 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c
#2: ffffff881e29c0e0 (&shost->scan_mutex){+.+.}-{3:3}, at: __scsi_add_device+0x74/0x120
#3: ffffff881960ea00 (&hwq->cq_lock){-...}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x28/0x104
the shortest dependencies between 2nd lock and 1st lock:
-> (shost->host_lock){+.+.}-{2:2} {
HARDIRQ-ON-W at:
lock_acquire+0x134/0x2b4
_raw_spin_lock+0x48/0x64
ufshcd_sl_intr+0x4c/0xa08
ufshcd_threaded_intr+0x70/0x12c
irq_thread_fn+0x48/0xa8
irq_thread+0x130/0x1ec
kthread+0x110/0x134
ret_from_fork+0x10/0x20
SOFTIRQ-ON-W at:
lock_acquire+0x134/0x2b4
_raw_spin_lock+0x48/0x64
ufshcd_sl_intr+0x4c/0xa08
ufshcd_threaded_intr+0x70/0x12c
irq_thread_fn+0x48/0xa8
irq_thread+0x130/0x1ec
kthread+0x110/0x134
ret_from_fork+0x10/0x20
INITIAL USE at:
lock_acquire+0x134/0x2b4
_raw_spin_lock+0x48/0x64
ufshcd_sl_intr+0x4c/0xa08
ufshcd_threaded_intr+0x70/0x12c
irq_thread_fn+0x48/0xa8
irq_thread+0x130/0x1ec
kthread+0x110/0x134
ret_from_fork+0x10/0x20
}
... key at: [<ffffffc085ba1a98>] scsi_host_alloc.__key+0x0/0x10
... acquired at:
_raw_spin_lock_irqsave+0x5c/0x80
__ufshcd_release+0x78/0x118
ufshcd_send_uic_cmd+0xe4/0x118
ufshcd_dme_set_attr+0x88/0x1c8
ufs_google_phy_initialization+0x68/0x418 [ufs]
ufs_google_link_startup_notify+0x78/0x27c [ufs]
ufshcd_link_startup+0x84/0x720
ufshcd_init+0xf3c/0x1330
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84 [ufs]
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__driver_attach_async_helper+0x60/0xd4
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
-> (&hba->clk_gating.lock){-...}-{2:2} {
IN-HARDIRQ-W at:
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
ufshcd_release_scsi_cmd+0x60/0x110
ufshcd_compl_one_cqe+0x2c0/0x3f4
ufshcd_mcq_poll_cqe_lock+0xb0/0x104
ufs_google_mcq_intr+0x80/0xa0 [ufs]
__handle_irq_event_percpu+0x104/0x32c
handle_irq_event+0x40/0x9c
handle_fasteoi_irq+0x170/0x2e8
generic_handle_domain_irq+0x58/0x80
gic_handle_irq+0x48/0x104
call_on_irq_stack+0x3c/0x50
do_interrupt_handler+0x7c/0xd8
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x3c/0x6c
debug_object_assert_init+0x16c/0x21c
__mod_timer+0x4c/0x48c
schedule_timeout+0xd4/0x16c
io_schedule_timeout+0x48/0x70
do_wait_for_common+0x100/0x194
wait_for_completion_io_timeout+0x48/0x6c
blk_execute_rq+0x124/0x17c
scsi_execute_cmd+0x18c/0x3f8
scsi_probe_and_add_lun+0x204/0xd74
__scsi_add_device+0xbc/0x120
ufshcd_async_scan+0x80/0x3c0
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
INITIAL USE at:
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
ufshcd_hold+0x34/0x14c
ufshcd_send_uic_cmd+0x28/0x118
ufshcd_dme_set_attr+0x88/0x1c8
ufs_google_phy_initialization+0x68/0x418 [ufs]
ufs_google_link_startup_notify+0x78/0x27c [ufs]
ufshcd_link_startup+0x84/0x720
ufshcd_init+0xf3c/0x1330
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84 [ufs]
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__driver_attach_async_helper+0x60/0xd4
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
}
... key at: [<ffffffc085ba6fe8>] ufshcd_init.__key+0x0/0x10
... acquired at:
mark_lock+0x1c4/0x224
__lock_acquire+0x438/0x2e1c
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
ufshcd_release_scsi_cmd+0x60/0x110
ufshcd_compl_one_cqe+0x2c0/0x3f4
ufshcd_mcq_poll_cqe_lock+0xb0/0x104
ufs_google_mcq_intr+0x80/0xa0 [ufs]
__handle_irq_event_percpu+0x104/0x32c
handle_irq_event+0x40/0x9c
handle_fasteoi_irq+0x170/0x2e8
generic_handle_domain_irq+0x58/0x80
gic_handle_irq+0x48/0x104
call_on_irq_stack+0x3c/0x50
do_interrupt_handler+0x7c/0xd8
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x3c/0x6c
debug_object_assert_init+0x16c/0x21c
__mod_timer+0x4c/0x48c
schedule_timeout+0xd4/0x16c
io_schedule_timeout+0x48/0x70
do_wait_for_common+0x100/0x194
wait_for_completion_io_timeout+0x48/0x6c
blk_execute_rq+0x124/0x17c
scsi_execute_cmd+0x18c/0x3f8
scsi_probe_and_add_lun+0x204/0xd74
__scsi_add_device+0xbc/0x120
ufshcd_async_scan+0x80/0x3c0
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
stack backtrace:
CPU: 6 UID: 0 PID: 12 Comm: kworker/u28:0 Tainted: G W OE 6.12.30-android16-5-maybe-dirty-4k #1 ccd4020fe444bdf629efc3b86df6be920b8df7d0
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Spacecraft board based on MALIBU (DT)
Workqueue: async async_run_entry_fn
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xa0
dump_stack+0x18/0x24
print_irq_inversion_bug+0x2fc/0x304
mark_lock_irq+0x388/0x4fc
mark_lock+0x1c4/0x224
__lock_acquire+0x438/0x2e1c
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
ufshcd_release_scsi_cmd+0x60/0x110
ufshcd_compl_one_cqe+0x2c0/0x3f4
ufshcd_mcq_poll_cqe_lock+0xb0/0x104
ufs_google_mcq_intr+0x80/0xa0 [ufs dd6f385554e109da094ab91d5f7be18625a2222a]
__handle_irq_event_percpu+0x104/0x32c
handle_irq_event+0x40/0x9c
handle_fasteoi_irq+0x170/0x2e8
generic_handle_domain_irq+0x58/0x80
gic_handle_irq+0x48/0x104
call_on_irq_stack+0x3c/0x50
do_interrupt_handler+0x7c/0xd8
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x3c/0x6c
debug_object_assert_init+0x16c/0x21c
__mod_timer+0x4c/0x48c
schedule_timeout+0xd4/0x16c
io_schedule_timeout+0x48/0x70
do_wait_for_common+0x100/0x194
wait_for_completion_io_timeout+0x48/0x6c
blk_execute_rq+0x124/0x17c
scsi_execute_cmd+0x18c/0x3f8
scsi_probe_and_add_lun+0x204/0xd74
__scsi_add_device+0xbc/0x120
ufshcd_async_scan+0x80/0x3c0
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Fixes: 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The commit under the Fixes tag added a netdev_assert_locked() in
bnxt_free_ntp_fltrs(). The lock should be held during normal run-time
but the assert will be triggered (see below) during bnxt_remove_one()
which should not need the lock. The netdev is already unregistered by
then. Fix it by calling netdev_assert_locked_or_invisible() which will
not assert if the netdev is unregistered.
WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en]
Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re]
CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 #2 PREEMPT(voluntary)
Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en]
Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffa92082387da0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001
RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf
RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3
R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001
R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100
FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0
Call Trace:
<TASK>
bnxt_remove_one+0x57/0x180 [bnxt_en]
pci_device_remove+0x39/0xc0
device_release_driver_internal+0xa5/0x130
driver_detach+0x42/0x90
bus_remove_driver+0x61/0xc0
pci_unregister_driver+0x38/0x90
bnxt_exit+0xc/0x7d0 [bnxt_en]
Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250816183850.4125033-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When BCM5325 support was added in c45655386e53 ("net: dsa: b53: add
support for FDB operations on 5325/5365"), the register used for ARL access
was made conditional on the chip.
But in b53_fdb_dump(), instead of the register argument the page
argument was replaced, causing it to write to a reserved page 0x50 on
!BCM5325*. Writing to this page seems to completely lock the switch up:
[ 89.680000] b53-switch spi0.1 lan2: Link is Down
[ 89.680000] WARNING: CPU: 1 PID: 26 at drivers/net/phy/phy.c:1350 _phy_state_machine+0x1bc/0x454
[ 89.720000] phy_check_link_status+0x0/0x114: returned: -5
[ 89.730000] Modules linked in: nft_fib_inet nf_flow_table_inet nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 cls_flower sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred act_gact vrf md5 crc32c_cryptoapi
[ 89.780000] CPU: 1 UID: 0 PID: 26 Comm: kworker/u10:0 Tainted: G W 6.16.0-rc1+ #0 NONE
[ 89.780000] Tainted: [W]=WARN
[ 89.780000] Hardware name: Netgear DGND3700 v1
[ 89.780000] Workqueue: events_power_efficient phy_state_machine
[ 89.780000] Stack : 809c762c 8006b050 00000001 820a9ce3 0000114c 000affff 805d22d0 8200ba00
[ 89.780000] 82005000 6576656e 74735f70 6f776572 5f656666 10008b00 820a9cb8 82088700
[ 89.780000] 00000000 00000000 809c762c 820a9a98 00000000 00000000 ffffefff 80a7a76c
[ 89.780000] 80a70000 820a9af8 80a70000 80a70000 80a70000 00000000 809c762c 820a9dd4
[ 89.780000] 00000000 805d1494 80a029e4 80a70000 00000003 00000000 00000004 81a60004
[ 89.780000] ...
[ 89.780000] Call Trace:
[ 89.780000] [<800228b8>] show_stack+0x38/0x118
[ 89.780000] [<8001afc4>] dump_stack_lvl+0x6c/0xac
[ 89.780000] [<80046b90>] __warn+0x9c/0x114
[ 89.780000] [<80046da8>] warn_slowpath_fmt+0x1a0/0x1b0
[ 89.780000] [<805d1494>] _phy_state_machine+0x1bc/0x454
[ 89.780000] [<805d22fc>] phy_state_machine+0x2c/0x70
[ 89.780000] [<80066b08>] process_one_work+0x1e8/0x3e0
[ 89.780000] [<80067a1c>] worker_thread+0x354/0x4e4
[ 89.780000] [<800706cc>] kthread+0x130/0x274
[ 89.780000] [<8001d808>] ret_from_kernel_thread+0x14/0x1c
And any further accesses fail:
[ 120.790000] b53-switch spi0.1: timeout waiting for ARL to finish: 0x81
[ 120.800000] b53-switch spi0.1: port 2 failed to add 2c:b0:5d:27:9a:bd vid 3 to fdb: -145
[ 121.010000] b53-switch spi0.1: timeout waiting for ARL to finish: 0xbf
[ 121.020000] b53-switch spi0.1: port 3 failed to add 2c:b0:5d:27:9a:bd vid 3 to fdb: -145
Restore the correct page B53_ARLIO_PAGE again, and move the offset
argument to the correct place.
*On BCM5325, this became a write to the MIB page of Port 1. Still
a reserved offset, but likely less brokenness from that write.
Fixes: c45655386e53 ("net: dsa: b53: add support for FDB operations on 5325/5365")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250815201809.549195-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: misc fixes for v6.17-rc
Here are various fixes:
- Patch 1: Better handling SKB extension allocation failures.
A fix for v5.7.
- Patches 2, 3: Avoid resetting MPTCP limits when flushing MPTCP
endpoints. With a validation in the selftests. Fixes for v5.7.
- Patches 4, 5, 6: Disallow '0' as ADD_ADDR retransmission timeout.
With a preparation patch, and a validation in the selftests.
Fixes for v5.11.
- Patches 8, 9: Fix C23 extension warnings in the selftests,
spotted by GCC. Fixes for v6.16.
====================
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-0-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC was complaining about the new label:
mptcp_inq.c:79:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
79 | int err = getaddrinfo(node, service, hints, res);
| ^
mptcp_sockopt.c:166:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
166 | int err = getaddrinfo(node, service, hints, res);
| ^
Simply declare 'err' before the label to avoid this warning.
Fixes: dd367e81b79a ("selftests: mptcp: sockopt: use IPPROTO_MPTCP for getaddrinfo")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-8-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC was complaining about the new label:
mptcp_connect.c:187:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
187 | int err = getaddrinfo(node, service, hints, res);
| ^
Simply declare 'err' before the label to avoid this warning.
Fixes: a862771d1aa4 ("selftests: mptcp: use IPPROTO_MPTCP for getaddrinfo")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-7-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To prevent test instability in the "delete re-add signal" test caused by
ADD_ADDR retransmissions, disable retransmissions for this test by setting
net.mptcp.add_addr_timeout to 0.
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-6-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When add_addr_timeout was set to 0, this caused the ADD_ADDR to be
retransmitted immediately, which looks like a buggy behaviour. Instead,
interpret 0 as "no retransmissions needed".
The documentation is updated to explicitly state that setting the timeout
to 0 disables retransmission.
Fixes: 93f323b9cccc ("mptcp: add a new sysctl add_addr_timeout")
Cc: stable@vger.kernel.org
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-5-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk_reset_timer() was called twice in mptcp_pm_alloc_anno_list.
Simplify the code by using a 'goto' statement to eliminate the
duplication.
Note that this is not a fix, but it will help backporting the following
patch. The same "Fixes" tag has been added for this reason.
Fixes: 93f323b9cccc ("mptcp: add a new sysctl add_addr_timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-4-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This modification is linked to the parent commit where the received
ADD_ADDR limit was accidentally reset when the endpoints were flushed.
To validate that, the test is now flushing endpoints after having set
new limits, and before checking them.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-3-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A flush of the MPTCP endpoints should not affect the MPTCP limits. In
other words, 'ip mptcp endpoint flush' should not change 'ip mptcp
limits'.
But it was the case: the MPTCP_PM_ATTR_RCV_ADD_ADDRS (add_addr_accepted)
limit was reset by accident. Removing the reset of this counter during a
flush fixes this issue.
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reported-by: Thomas Dreibholz <dreibh@simula.no>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/579
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-2-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When skb_ext_add(skb, SKB_EXT_MPTCP) fails in mptcp_incoming_options(),
we used to return true, letting the segment proceed through the TCP
receive path without a DSS mapping. Such segments can leave inconsistent
mapping state and trigger a mid-stream fallback to TCP, which in testing
collapsed (by artificially forcing failures in skb_ext_add) throughput
to zero.
Return false instead so the TCP input path drops the skb (see
tcp_data_queue() and step-7 processing). This is the safer choice
under memory pressure: it preserves MPTCP correctness and provides
backpressure to the sender.
Control packets remain unaffected: ACK updates and DATA_FIN handling
happen before attempting the extension allocation, and tcp_reset()
continues to ignore the return value.
With this change, MPTCP continues to work at high throughput if we
artificially inject failures into skb_ext_add.
Fixes: 6787b7e350d3 ("mptcp: avoid processing packet if a subflow reset")
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-1-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The seg6_genl_sethmac() directly uses the algorithm ID provided by the
userspace without verifying whether it is an HMAC algorithm supported
by the system.
If an unsupported HMAC algorithm ID is configured, packets using SRv6 HMAC
will be dropped during encapsulation or decapsulation.
Fixes: 4f4853dc1c9c ("ipv6: sr: implement API to control SR HMAC structure")
Signed-off-by: Minhong He <heminhong@kylinos.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250815063845.85426-1-heminhong@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When performing Generic Segmentation Offload (GSO) on an IPv6 packet that
contains extension headers, the kernel incorrectly requests checksum offload
if the egress device only advertises NETIF_F_IPV6_CSUM feature, which has
a strict contract: it supports checksum offload only for plain TCP or UDP
over IPv6 and explicitly does not support packets with extension headers.
The current GSO logic violates this contract by failing to disable the feature
for packets with extension headers, such as those used in GREoIPv6 tunnels.
This violation results in the device being asked to perform an operation
it cannot support, leading to a `skb_warn_bad_offload` warning and a collapse
of network throughput. While device TSO/USO is correctly bypassed in favor
of software GSO for these packets, the GSO stack must be explicitly told not
to request checksum offload.
Mask NETIF_F_IPV6_CSUM, NETIF_F_TSO6 and NETIF_F_GSO_UDP_L4
in gso_features_check if the IPv6 header contains extension headers to compute
checksum in software.
The exception is a BIG TCP extension, which, as stated in commit
68e068cabd2c6c53 ("net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets"):
"The feature is only enabled on devices that support BIG TCP TSO.
The header is only present for PF_PACKET taps like tcpdump,
and not transmitted by physical devices."
kernel log output (truncated):
WARNING: CPU: 1 PID: 5273 at net/core/dev.c:3535 skb_warn_bad_offload+0x81/0x140
...
Call Trace:
<TASK>
skb_checksum_help+0x12a/0x1f0
validate_xmit_skb+0x1a3/0x2d0
validate_xmit_skb_list+0x4f/0x80
sch_direct_xmit+0x1a2/0x380
__dev_xmit_skb+0x242/0x670
__dev_queue_xmit+0x3fc/0x7f0
ip6_finish_output2+0x25e/0x5d0
ip6_finish_output+0x1fc/0x3f0
ip6_tnl_xmit+0x608/0xc00 [ip6_tunnel]
ip6gre_tunnel_xmit+0x1c0/0x390 [ip6_gre]
dev_hard_start_xmit+0x63/0x1c0
__dev_queue_xmit+0x6d0/0x7f0
ip6_finish_output2+0x214/0x5d0
ip6_finish_output+0x1fc/0x3f0
ip6_xmit+0x2ca/0x6f0
ip6_finish_output+0x1fc/0x3f0
ip6_xmit+0x2ca/0x6f0
inet6_csk_xmit+0xeb/0x150
__tcp_transmit_skb+0x555/0xa80
tcp_write_xmit+0x32a/0xe90
tcp_sendmsg_locked+0x437/0x1110
tcp_sendmsg+0x2f/0x50
...
skb linear: 00000000: e4 3d 1a 7d ec 30 e4 3d 1a 7e 5d 90 86 dd 60 0e
skb linear: 00000010: 00 0a 1b 34 3c 40 20 11 00 00 00 00 00 00 00 00
skb linear: 00000020: 00 00 00 00 00 12 20 11 00 00 00 00 00 00 00 00
skb linear: 00000030: 00 00 00 00 00 11 2f 00 04 01 04 01 01 00 00 00
skb linear: 00000040: 86 dd 60 0e 00 0a 1b 00 06 40 20 23 00 00 00 00
skb linear: 00000050: 00 00 00 00 00 00 00 00 00 12 20 23 00 00 00 00
skb linear: 00000060: 00 00 00 00 00 00 00 00 00 11 bf 96 14 51 13 f9
skb linear: 00000070: ae 27 a0 a8 2b e3 80 18 00 40 5b 6f 00 00 01 01
skb linear: 00000080: 08 0a 42 d4 50 d5 4b 70 f8 1a
Fixes: 04c20a9356f283da ("net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Suggested-by: Michal Schmidt <mschmidt@redhat.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Jakub Ramaseuski <jramaseu@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250814105119.1525687-1-jramaseu@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bdev_nr_sectors() == 0 is a pattern used for block devices that have
been hot removed, don't spam the log about them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250818101102.1604551-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use vfs_getattr_nosec() in lo_calculate_size() for getting the file
size, rather than just read the cached inode size via i_size_read().
This provides better results than cached inode data, particularly for
network filesystems where metadata may be stale.
Signed-off-by: Rajeev Mishra <rajeevm@hpe.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250818184821.115033-3-rajeevm@hpe.com
[axboe: massage commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Renamed get_size to lo_calculate_size and merged the logic from get_size
and get_loop_size into a single function. Update all callers to use
lo_calculate_size. This is done in preparation for improving the size
detection logic.
Signed-off-by: Rajeev Mishra <rajeevm@hpe.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250818184821.115033-2-rajeevm@hpe.com
[axboe: massage commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux into block-6.17
Pull MD fixes from Yu:
"- Add a legacy_async_del_gendisk mode, to prevent a user tools
regression. New user tools releases will not use such a mode, the old
release with a new kernel now will have warning about deprecated
behavior, and we prepare to remove this legacy mode after about a
year later.
- The rename in kernel causing user tools build failure, revert the
rename in mdp_superblock_s.
- Fix a regression that interrupted resync can be shown as recover from
mdstat or sysfs."
* tag 'md-6.17-20250819' of gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux:
md: fix sync_action incorrect display during resync
md: add helper rdev_needs_recovery()
md: keep recovery_cp in mdp_superblock_s
md: add legacy_async_del_gendisk mode
|
|
Modify the standby configuration
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20250815024729.3051-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Occasionally, the exit latency of the idle state selected by the menu
governor may exceed the PM QoS CPU wakeup latency limit. Namely, if the
scheduler tick has been stopped already and predicted_ns is greater than
the tick period length, the governor may return an idle state whose exit
latency exceeds latency_req because that decision is made before
checking the current idle state's exit latency.
For instance, say that there are 3 idle states, 0, 1, and 2. For idle
states 0 and 1, the exit latency is equal to the target residency and
the values are 0 and 5 us, respectively. State 2 is deeper and has the
exit latency and target residency of 200 us and 2 ms (which is greater
than the tick period length), respectively.
Say that predicted_ns is equal to TICK_NSEC and the PM QoS latency
limit is 20 us. After the first two iterations of the main loop in
menu_select(), idx becomes 1 and in the third iteration of it the target
residency of the current state (state 2) is greater than predicted_ns.
State 2 is not a polling one and predicted_ns is not less than TICK_NSEC,
so the check on whether or not the tick has been stopped is done. Say
that the tick has been stopped already and there are no imminent timers
(that is, delta_tick is greater than the target residency of state 2).
In that case, idx becomes 2 and it is returned immediately, but the exit
latency of state 2 exceeds the latency limit.
Address this issue by modifying the code to compare the exit latency of
the current idle state (idle state i) with the latency limit before
comparing its target residency with predicted_ns, which allows one
more exit_latency_ns check that becomes redundant to be dropped.
However, after the above change, latency_req cannot take the predicted_ns
value any more, which takes place after commit 38f83090f515 ("cpuidle:
menu: Remove iowait influence"), because it may cause a polling state
to be returned prematurely.
In the context of the previous example say that predicted_ns is 3000 and
the PM QoS latency limit is still 20 us. Additionally, say that idle
state 0 is a polling one. Moving the exit_latency_ns check before the
target_residency_ns one causes the loop to terminate in the second
iteration, before the target_residency_ns check, so idle state 0 will be
returned even though previously state 1 would be returned if there were
no imminent timers.
For this reason, remove the assignment of the predicted_ns value to
latency_req from the code.
Fixes: 5ef499cd571c ("cpuidle: menu: Handle stopped tick more aggressively")
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/5043159.31r3eYUQgx@rafael.j.wysocki
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge a cpupower utility fix for 6.17-rc3 from Shuah Khan:
"Fixes set subcommand -t option and enables boost control feature on
non-x86 platforms that support boost control."
* tag 'linux-cpupower-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Allow control of boost feature on non-x86 based systems with boost support.
cpupower: Fix a bug where the -t option of the set subcommand was not working.
|
|
The .remove() callback is also used during error handling in
faux_probe(). As einj_remove() was marked with __exit it's not linked
into the kernel if the driver is built-in, potentially resulting in
resource leaks.
Also remove the comment justifying the __exit annotation which doesn't
apply any more since the driver was converted to the faux device
interface.
Fixes: 6cb9441bfe8d ("ACPI: APEI: EINJ: Transition to the faux device interface")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Link: https://patch.msgid.link/20250814051157.35867-2-u.kleine-koenig@baylibre.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Otherwise they are very hard to read in the kernel log.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250818045456.1482889-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_limits_stack_integrity needs to handle the new pi_tuple_size field,
otherwise stacking PI-capable devices will always fail.
Fixes: 76e45252a4ce ("block: introduce pi_tuple_size field in blk_integrity")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250818045456.1482889-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Several zoned mode fixes, mount option printing fixups, folio state
handling fixes and one log replay fix.
- zoned mode:
- zone activation and finish fixes
- block group reservation fixes
- mount option fixes:
- bring back printing of mount options with key=value that got
accidentally dropped during mount option parsing in 6.8
- fix inverse logic or typos when printing nodatasum/nodatacow
- folio status fixes:
- writeback fixes in zoned mode
- properly reset dirty/writeback if submission fails
- properly handle TOWRITE xarray mark/tag
- do not set mtime/ctime to current time when unlinking for log
replay"
* tag 'for-6.17-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix printing of mount info messages for NODATACOW/NODATASUM
btrfs: restore mount option info messages during mount
btrfs: fix incorrect log message for nobarrier mount option
btrfs: fix buffer index in wait_eb_writebacks()
btrfs: subpage: keep TOWRITE tag until folio is cleaned
btrfs: clear TAG_TOWRITE from buffer tree when submitting a tree block
btrfs: do not set mtime/ctime to current time when unlinking for log replay
btrfs: clear block dirty if btrfs_writepage_cow_fixup() failed
btrfs: clear block dirty if submit_one_sector() failed
btrfs: zoned: limit active zones to max_open_zones
btrfs: zoned: fix write time activation failure for metadata block group
btrfs: zoned: fix data relocation block group reservation
btrfs: zoned: skip ZONE FINISH of conventional zones
|
|
The __einj_error_inject() function allocates memory via kmalloc()
without checking for allocation failure, which could lead to a
NULL pointer dereference.
Return -ENOMEM in case allocation fails.
Fixes: b47610296d17 ("ACPI: APEI: EINJ: Enable EINJv2 error injections")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://patch.msgid.link/20250815024207.3038-1-hanchunchao@inspur.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On an EINJV2 capable system, users may still use the old injection
interface but einj_get_parameter_address() takes the EINJV2 path to map
the parameter structure. This results in the address the user supplied
being stored to the wrong location and the BIOS injecting based on an
uninitialized field (0x0 in the reported case).
Check the version of the request when mapping the EINJ parameter
structure in BIOS reserved memory.
Fixes: 691a0f0a557b ("ACPI: APEI: EINJ: Discover EINJv2 parameters")
Reported-by: Lai, Yi1 <yi1.lai@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Zaid Alali <zaidal@os.amperecomputing.com>
Reviewed-by: Hanjun Guo <gouhanjun@huawei.com>
Link: https://patch.msgid.link/20250814161706.4489-1-tony.luck@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
- Fix fast commit checks for file systems with ea_inode enabled
- Don't drop the i_version mount option on a remount
- Fix FIEMAP reporting when there are holes in a bigalloc file system
- Don't fail when mounting read-only when there are inodes in the
orphan file
- Fix hole length overflow for indirect mapped files on file systems
with an 8k or 16k block file system
* tag 'ext4_for_linus-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: prevent softlockup in jbd2_log_do_checkpoint()
ext4: fix incorrect function name in comment
ext4: use kmalloc_array() for array space allocation
ext4: fix hole length calculation overflow in non-extent inodes
ext4: don't try to clear the orphan_present feature block device is r/o
ext4: fix reserved gdt blocks handling in fsmap
ext4: fix fsmap end of range reporting with bigalloc
ext4: remove redundant __GFP_NOWARN
ext4: fix unused variable warning in ext4_init_new_dir
ext4: remove useless if check
ext4: check fast symlink for ea_inode correctly
ext4: preserve SB_I_VERSION on remount
ext4: show the default enabled i_version option
|
|
__ADDRESSABLE_ASM_STR() is where the necessary stringification happens.
As long as "sym" doesn't contain any odd characters, no quoting is
required for its use with .quad / .long. In fact the quotation gets in
the way with gas 2.25; it's only from 2.26 onwards that quoted symbols
are half-way properly supported.
However, assembly being different from C anyway, drop
__ADDRESSABLE_ASM_STR() and its helper macro altogether. A simple
.global directive will suffice to get the symbol "declared", i.e. into
the symbol table. While there also stop open-coding STATIC_CALL_TRAMP()
and STATIC_CALL_KEY().
Fixes: 0ef8047b737d ("x86/static-call: provide a way to do very early static-call updates")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <609d2c74-de13-4fae-ab1a-1ec44afb948d@suse.com>
|
|
With module test, there is error dump:
------------[ cut here ]------------
notifier callback pca9450_i2c_restart_handler already registered
WARNING: kernel/notifier.c:23 at notifier_chain_register+0x5c/0x88,
CPU#0: kworker/u16:3/50
Call trace:
notifier_chain_register+0x5c/0x88 (P)
atomic_notifier_chain_register+0x30/0x58
register_restart_handler+0x1c/0x28
pca9450_i2c_probe+0x418/0x538
i2c_device_probe+0x220/0x3d0
really_probe+0x114/0x410
__driver_probe_device+0xa0/0x150
driver_probe_device+0x40/0x114
__device_attach_driver+0xd4/0x12c
So use devm_register_sys_off_handler to let kernel handle the resource
free to avoid kernel dump.
Fixes: 6157e62b07d9 ("regulator: pca9450: Add restart handler")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250815-pca9450-v1-1-7748e362dc97@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use ARRAY_SIZE() macro while calculating size of an array to improve
code readability and reduce potential sizing errors.
Implement this suggestion given by spatch tool by running
coccinelle script - scripts/coccinelle/misc/array_size.cocci
Follow ARRAY_SIZE() macro usage pattern in ublk.c introduced by,
commit ec120093180b9 ("selftests: ublk: fix ublk_find_tgt()")
wherever appropriate to maintain consistency.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/aKGihYui6/Pcijbk@bhairav-test.ee.iitb.ac.in
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
commit 9d23967b18c6 ("ovl: simplify an error path in
ovl_copy_up_workdir()") introduced the helper ovl_cleanup_unlocked(),
which is later used in several following patches to re-acquire the parent
inode lock and unlink a dentry that was earlier found using lookup.
This helper was eventually renamed to ovl_cleanup().
The helper ovl_parent_lock() is used to re-acquire the parent inode lock.
After acquiring the parent inode lock, the helper verifies that the
dentry has not since been moved to another parent, but it failed to
verify that the dentry wasn't unlinked from the parent.
This means that now every call to ovl_cleanup() could potentially
race with another thread, unlinking the dentry to be cleaned up
underneath overlayfs and trigger a vfs assertion.
Reported-by: syzbot+ec9fab8b7f0386b98a17@syzkaller.appspotmail.com
Tested-by: syzbot+ec9fab8b7f0386b98a17@syzkaller.appspotmail.com
Fixes: 9d23967b18c6 ("ovl: simplify an error path in ovl_copy_up_workdir()")
Suggested-by: NeilBrown <neil@brown.name>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
ovl_create_temp() treats "workdir" as a parent in which it creates an
object so it should use I_MUTEX_PARENT.
Prior to the commit identified below the lock was taken by the caller
which sometimes used I_MUTEX_PARENT and sometimes used I_MUTEX_NORMAL.
The use of I_MUTEX_NORMAL was incorrect but unfortunately copied into
ovl_create_temp().
Note to backporters: This patch only applies after the last Fixes given
below (post v6.16). To fix the bug in v6.7 and later the
inode_lock() call in ovl_copy_up_workdir() needs to nest using
I_MUTEX_PARENT.
Link: https://lore.kernel.org/all/67a72070.050a0220.3d72c.0022.GAE@google.com/
Cc: stable@vger.kernel.org
Reported-by: syzbot+7836a68852a10ec3d790@syzkaller.appspotmail.com
Tested-by: syzbot+7836a68852a10ec3d790@syzkaller.appspotmail.com
Fixes: c63e56a4a652 ("ovl: do not open/llseek lower file with upper sb_writers held")
Fixes: d2c995581c7c ("ovl: Call ovl_create_temp() without lock held.")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
The "p" pointer is void so sizeof(*p) is 1. The intent was to check
sizeof(*cs_desc), which is 3, instead.
Fixes: ecfd41166b72 ("ALSA: usb-audio: Validate UAC3 cluster segment descriptors")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aKL5kftC1qGt6lpv@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The existing memstick core patch: commit 62c59a8786e6 ("memstick: Skip
allocating card when removing host") sets host->removing in
memstick_remove_host(),but still exists a critical time window where
memstick_check can run after host->eject is set but before removing is set.
In the rtsx_usb_ms driver, the problematic sequence is:
rtsx_usb_ms_drv_remove: memstick_check:
host->eject = true
cancel_work_sync(handle_req) if(!host->removing)
... memstick_alloc_card()
memstick_set_rw_addr()
memstick_new_req()
rtsx_usb_ms_request()
if(!host->eject)
skip schedule_work
wait_for_completion()
memstick_remove_host: [blocks indefinitely]
host->removing = true
flush_workqueue()
[block]
1. rtsx_usb_ms_drv_remove sets host->eject = true
2. cancel_work_sync(&host->handle_req) runs
3. memstick_check work may be executed here <-- danger window
4. memstick_remove_host sets removing = 1
During this window (step 3), memstick_check calls memstick_alloc_card,
which may indefinitely waiting for mrq_complete completion that will
never occur because rtsx_usb_ms_request sees eject=true and skips
scheduling work, memstick_set_rw_addr waits forever for completion.
This causes a deadlock when memstick_remove_host tries to flush_workqueue,
waiting for memstick_check to complete, while memstick_check is blocked
waiting for mrq_complete completion.
Fix this by setting removing=true at the start of rtsx_usb_ms_drv_remove,
before any work cancellation. This ensures memstick_check will see the
removing flag immediately and exit early, avoiding the deadlock.
Fixes: 62c59a8786e6 ("memstick: Skip allocating card when removing host")
Signed-off-by: Jiayi Li <lijiayi@kylinos.cn>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250804013604.1311218-1-lijiayi@kylinos.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
During SD suspend/resume without a full card rescan (when using
non-removable SD cards for rootfs), the SD card initialization may fail
after resume. This occurs because, after a host controller reset, the
card detect logic may take time to stabilize due to debounce logic.
Without waiting for stabilization, the host may attempt powering up the
card prematurely, leading to command timeouts during resume flow.
Add sdhci_arasan_set_power_and_bus_voltage() to wait for the card detect
stable bit before power up the card. Since the stabilization time
is not fixed, a maximum timeout of one second is used to ensure
sufficient wait time for the card detect signal to stabilize.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250730060543.1735971-1-sai.krishna.potthuri@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Due to a flaw in the hardware design, the GL9763e replay timer frequently
times out when ASPM is enabled. As a result, the warning messages will
often appear in the system log when the system accesses the GL9763e
PCI config. Therefore, the replay timer timeout must be masked.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Fixes: 1ae1d2d6e555 ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")
Cc: stable@vger.kernel.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250731065752.450231-4-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In preparation to fix replay timer timeout, rename the
gli_set_gl9763e() to gl9763e_hw_setting() for consistency.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Fixes: 1ae1d2d6e555 ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")
Cc: stable@vger.kernel.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250731065752.450231-3-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In preparation to fix replay timer timeout, add
sdhci_gli_mask_replay_timer_timeout() function
to simplify some of the code, allowing it to be re-used.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Fixes: 1ae1d2d6e555 ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")
Cc: stable@vger.kernel.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250731065752.450231-2-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
With some new devices adding into the driver, dvc_tlv and amp_vol_tlv will
cause confusion for customers on which devices they support.
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250816042741.1659-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When ksmbd_conn_releasing(opinfo->conn) returns true,the refcount was not
decremented properly, causing a refcount leak that prevents the count from
reaching zero and the memory from being released.
Cc: stable@vger.kernel.org
Signed-off-by: Ziyan Xu <ziyan@securitygossip.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
