| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"12 hotfixes. 5 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels.
10 of these fixes are for MM"
* tag 'mm-hotfixes-stable-2025-08-12-20-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
proc: proc_maps_open allow proc_mem_open to return NULL
mm/mremap: avoid expensive folio lookup on mremap folio pte batch
userfaultfd: fix a crash in UFFDIO_MOVE when PMD is a migration entry
mm: pass page directly instead of using folio_page
selftests/proc: fix string literal warning in proc-maps-race.c
fs/proc/task_mmu: hold PTL in pagemap_hugetlb_range and gather_hugetlb_stats
mm/smaps: fix race between smaps_hugetlb_range and migration
mm: fix the race between collapse and PT_RECLAIM under per-vma lock
mm/kmemleak: avoid soft lockup in __kmemleak_do_cleanup()
MAINTAINERS: add Masami as a reviewer of hung task detector
mm/kmemleak: avoid deadlock by moving pr_warn() outside kmemleak_lock
kasan/test: fix protection against compiler elision
|
|
Change the name of the kcontrol from "Gain" to "Volume".
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250813100708.12197-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit 0b2b066f8a85 ("io_uring/io-wq: only create a new worker
if it can make progress"), in our produce environment, we still
observe that part of io_worker threads keeps creating and destroying.
After analysis, it was confirmed that this was due to a more complex
scenario involving a large number of fsync operations, which can be
abstracted as frequent write + fsync operations on multiple files in
a single uring instance. Since write is a hash operation while fsync
is not, and fsync is likely to be suspended during execution, the
action of checking the hash value in
io_wqe_dec_running cannot handle such scenarios.
Similarly, if hash-based work and non-hash-based work are sent at the
same time, similar issues are likely to occur.
Returning to the starting point of the issue, when a new work
arrives, io_wq_enqueue may wake up free worker A, while
io_wq_dec_running may create worker B. Ultimately, only one of A and
B can obtain and process the task, leaving the other in an idle
state. In the end, the issue is caused by inconsistent logic in the
checks performed by io_wq_enqueue and io_wq_dec_running.
Therefore, the problem can be resolved by checking for available
workers in io_wq_dec_running.
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
Reviewed-by: Diangang Li <lidiangang@bytedance.com>
Link: https://lore.kernel.org/r/20250813120214.18729-1-changfengnan@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The NODATASUM message was printed twice by mistake and the NODATACOW was
missing from the 'unset' part. Fix the duplication and make the output
look the same.
Fixes: eddb1a433f26 ("btrfs: add reconfigure callback for fs_context")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
After the fsconfig migration in 6.8, mount option info messages are no
longer displayed during mount operations because btrfs_emit_options() is
only called during remount, not during initial mount.
Fix this by calling btrfs_emit_options() in btrfs_fill_super() after
open_ctree() succeeds. Additionally, prevent log duplication by ensuring
btrfs_check_options() handles validation with warn-level and err-level
messages, while btrfs_emit_options() provides info-level messages.
Fixes: eddb1a433f26 ("btrfs: add reconfigure callback for fs_context")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fix a wrong log message that appears when the "nobarrier" mount option
is unset. When "nobarrier" is unset, barrier is actually enabled.
However, the log incorrectly stated "turning off barriers".
Fixes: eddb1a433f26 ("btrfs: add reconfigure callback for fs_context")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The commit f2cb97ee964a ("btrfs: index buffer_tree using node size")
changed the index of buffer_tree from "start >> sectorsize_bits" to "start
>> nodesize_bits". However, the change is not applied for
wait_eb_writebacks() and caused IO failures by writing in a full zone. Use
the index properly.
Fixes: f2cb97ee964a ("btrfs: index buffer_tree using node size")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_subpage_set_writeback() calls folio_start_writeback() the first time
a folio is written back, and it also clears the PAGECACHE_TAG_TOWRITE tag
even if there are still dirty blocks in the folio. This can break ordering
guarantees, such as those required by btrfs_wait_ordered_extents().
That ordering breakage leads to a real failure. For example, running
generic/464 on a zoned setup will hit the following ASSERT. This happens
because the broken ordering fails to flush existing dirty pages before the
file size is truncated.
assertion failed: !list_empty(&ordered->list) :: 0, in fs/btrfs/zoned.c:1899
------------[ cut here ]------------
kernel BUG at fs/btrfs/zoned.c:1899!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 1906169 Comm: kworker/u130:2 Kdump: loaded Not tainted 6.16.0-rc6-BTRFS-ZNS+ #554 PREEMPT(voluntary)
Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021
Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
RIP: 0010:btrfs_finish_ordered_zoned.cold+0x50/0x52 [btrfs]
RSP: 0018:ffffc9002efdbd60 EFLAGS: 00010246
RAX: 000000000000004c RBX: ffff88811923c4e0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff827e38b1 RDI: 00000000ffffffff
RBP: ffff88810005d000 R08: 00000000ffffdfff R09: ffffffff831051c8
R10: ffffffff83055220 R11: 0000000000000000 R12: ffff8881c2458c00
R13: ffff88811923c540 R14: ffff88811923c5e8 R15: ffff8881c1bd9680
FS: 0000000000000000(0000) GS:ffff88a04acd0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f907c7a918c CR3: 0000000004024000 CR4: 0000000000350ef0
Call Trace:
<TASK>
? srso_return_thunk+0x5/0x5f
btrfs_finish_ordered_io+0x4a/0x60 [btrfs]
btrfs_work_helper+0xf9/0x490 [btrfs]
process_one_work+0x204/0x590
? srso_return_thunk+0x5/0x5f
worker_thread+0x1d6/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0x118/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x205/0x260
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Consider process A calling writepages() with WB_SYNC_NONE. In zoned mode or
for compressed writes, it locks several folios for delalloc and starts
writing them out. Let's call the last locked folio folio X. Suppose the
write range only partially covers folio X, leaving some pages dirty.
Process A calls btrfs_subpage_set_writeback() when building a bio. This
function call clears the TOWRITE tag of folio X, whose size = 8K and
the block size = 4K. It is following state.
0 4K 8K
|/////|/////| (flag: DIRTY, tag: DIRTY)
<-----> Process A will write this range.
Now suppose process B concurrently calls writepages() with WB_SYNC_ALL. It
calls tag_pages_for_writeback() to tag dirty folios with
PAGECACHE_TAG_TOWRITE. Since folio X is still dirty, it gets tagged. Then,
B collects tagged folios using filemap_get_folios_tag() and must wait for
folio X to be written before returning from writepages().
0 4K 8K
|/////|/////| (flag: DIRTY, tag: DIRTY|TOWRITE)
However, between tagging and collecting, process A may call
btrfs_subpage_set_writeback() and clear folio X's TOWRITE tag.
0 4K 8K
| |/////| (flag: DIRTY|WRITEBACK, tag: DIRTY)
As a result, process B won't see folio X in its batch, and returns without
waiting for it. This breaks the WB_SYNC_ALL ordering requirement.
Fix this by using btrfs_subpage_set_writeback_keepwrite(), which retains
the TOWRITE tag. We now manually clear the tag only after the folio becomes
clean, via the xas operation.
Fixes: 3470da3b7d87 ("btrfs: subpage: introduce helpers for writeback status")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[POSSIBLE BUG]
After commit 5e121ae687b8 ("btrfs: use buffer xarray for extent buffer
writeback operations"), we have a dedicated xarray for extent buffers,
and a lot of tags are migrated to that buffer tree, like
PAGECACHE_TAG_TOWRITE/DIRTY/WRITEBACK.
This frees us from the limits of page flags, but there is a new
asymmetric behavior, we call buffer_tree_tag_for_writeback() to set
PAGECACHE_TAG_TOWRITE for the involved ranges, but there is no one to
clear that tag.
Before that rework, we relied on the page cache tag which was cleared
when folio_start_writeback() was called.
Although this has its own problems (e.g. the first one calling
folio_start_writeback() will clear the tag for the whole page), it at
least cleared the tag.
But now our real tags are stored in the buffer tree, no one is really
clearing the PAGECACHE_TAG_TOWRITE tag now.
[FIX]
Thankfully this is not going to cause any real bug, but just some
inefficiency iterating the extent buffers.
As if we hit an extent buffer which is not dirty but still has the
PAGECACHE_TAG_TOWRITE tag, lock_extent_buffer_for_io() will skip it so
we won't writeback the extent buffer again.
To properly fix the inefficiency, just clear the PAGECACHE_TAG_TOWRITE
inside lock_extent_buffer_for_io().
There is no error path between lock_extent_buffer_for_io() and
write_one_eb(), so we're safe to clear the tag there.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we are doing an unlink for log replay, we are updating the directory's
mtime and ctime to the current time, and this is incorrect since it should
stay with the mtime and ctime that were set when the directory was logged.
This is the same as when adding a link to an inode during log replay (with
btrfs_add_link()), where we want the mtime and ctime to be the values that
were in place when the inode was logged.
This was found with generic/547 using LOAD_FACTOR=20 and TIME_FACTOR=20,
where due to large log trees we have longer log replay times and fssum
could detect a mismatch of the mtime and ctime of a directory.
Fix this by skipping the mtime and ctime update at __btrfs_unlink_inode()
if we are in log replay context (just like btrfs_add_link()).
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
If btrfs_writepage_cow_fixup() failed (returning value -EUCLEAN),
the block will be kept dirty, but with its corresponding range finished
in the ordered extent.
Currently that error pattern is only possible for experimental builds,
which places extra check to ensure we shouldn't hit a dirty block
without a corresponding ordered extent.
This means if later a writeback happens again, we can hit the following
problems:
- ASSERT(block_start != EXTENT_MAP_HOLE) in submit_one_sector()
If the original extent map is a hole, then we can hit this case, as
the new ordered extent failed, we will drop the new extent map and
re-read one from the disk.
- DEBUG_WARN() in btrfs_writepage_cow_fixup()
This is because we no longer have an ordered extent for those dirty
blocks. The original for them is already finished with error.
[CAUSE]
The function btrfs_writepage_cow_fixup() is not following the regular
error handling of writeback. The common practice is to clear the folio
dirty, start and finish the writeback for the block.
This is normally done by extent_clear_unlock_delalloc() with
PAGE_START_WRITEBACK | PAGE_END_WRITEBACK flags during
run_delalloc_range().
So if we keep those failed blocks dirty, they will stay in the page
cache and wait for the next writeback.
And since the original ordered extent is already finished and removed,
depending on the original extent map, we either hit the ASSERT() inside
submit_one_sector(), or hit the DEBUG_WARN() in
btrfs_writepage_cow_fixup() again (and very ironic).
[FIX]
Follow the regular error handling to clear the dirty flag for the block
range, start and finish writeback for that block range instead.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
If submit_one_sector() failed, the block will be kept dirty, but with
their corresponding range finished in the ordered extent.
This means if a writeback happens later again, we can hit the following
problems:
- ASSERT(block_start != EXTENT_MAP_HOLE) in submit_one_sector()
If the original extent map is a hole, then we can hit this case, as
the new ordered extent failed, we will drop the new extent map and
re-read one from the disk.
- DEBUG_WARN() in btrfs_writepage_cow_fixup()
This is because we no longer have an ordered extent for those dirty
blocks. The original for them is already finished with error.
[CAUSE]
The function submit_one_sector() is not following the regular error
handling of writeback. The common practice is to clear the folio dirty,
start and finish the writeback for the block.
This is normally done by extent_clear_unlock_delalloc() with
PAGE_START_WRITEBACK | PAGE_END_WRITEBACK flags during
run_delalloc_range().
So if we keep those failed blocks dirty, they will stay in the page
cache and wait for the next writeback.
And since the original ordered extent is already finished and removed,
depending on the original extent map, we either hit the ASSERT() inside
submit_one_sector(), or hit the DEBUG_WARN() in
btrfs_writepage_cow_fixup().
[FIX]
Follow the regular error handling to clear the dirty flag for the block,
start and finish writeback for that block instead.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
commit 9e59d609763f ("md: call del_gendisk in control path") changes the
async way to sync way of calling del_gendisk. But it breaks mdadm
--assemble command. The assemble command runs like this:
1. create the array
2. stop the array
3. access the sysfs files after stopping
The sync way calls del_gendisk in step 2, so all sysfs files are removed.
Now to avoid breaking mdadm assemble command, this patch adds the parameter
legacy_async_del_gendisk that can be used to choose which way. The default
is async way. In future, we plan to change default to sync way in kernel
7.0. Then users need to upgrade to mdadm 4.5+ which removes step 2.
Fixes: 9e59d609763f ("md: call del_gendisk in control path")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/linux-raid/CAMw=ZnQ=ET2St-+hnhsuq34rRPnebqcXqP1QqaHW5Bh4aaaZ4g@mail.gmail.com/T/#t
Suggested-and-reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/linux-raid/20250813032929.54978-1-xni@redhat.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
The commit 245618f8e45f ("block: protect wbt_lat_usec using
q->elevator_lock") protected wbt_enable_default() with
q->elevator_lock; however, it also placed wbt_enable_default()
before blk_queue_flag_set(QUEUE_FLAG_REGISTERED, q);, resulting
in wbt failing to be enabled.
Moreover, the protection of wbt_enable_default() by q->elevator_lock
was removed in commit 78c271344b6f ("block: move wbt_enable_default()
out of queue freezing from sched ->exit()"), so we can directly fix
this issue by placing wbt_enable_default() after
blk_queue_flag_set(QUEUE_FLAG_REGISTERED, q);.
Additionally, this issue also causes the inability to read the
wbt_lat_usec file, and the scenario is as follows:
root@q:/sys/block/sda/queue# cat wbt_lat_usec
cat: wbt_lat_usec: Invalid argument
root@q:/data00/sjc/linux# ls /sys/kernel/debug/block/sda/rqos
cannot access '/sys/kernel/debug/block/sda/rqos': No such file or directory
root@q:/data00/sjc/linux# find /sys -name wbt
/sys/kernel/debug/tracing/events/wbt
After testing with this patch, wbt can be enabled normally.
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Cc: stable@vger.kernel.org
Fixes: 245618f8e45f ("block: protect wbt_lat_usec using q->elevator_lock")
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250812154257.57540-1-sunjunchao@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix spelling mistake directoy to directory
Reported-by: codespell
Signed-off-by: Erick Karanja <karanja99erick@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250813071837.668613-1-karanja99erick@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
DIP algorithm is also supported on devices newer than hip09, so free
dip entries too.
Fixes: f91696f2f053 ("RDMA/hns: Support congestion control type selection according to the FW")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250812122602.3524602-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Ensure that pfn_list allocated by kvcalloc() is freed using corresponding
kvfree() function. Match memory allocation and free routines kvcalloc -> kvfree.
Fixes: 259e9bd07c57 ("RDMA/core: Avoid hmm_dma_map_alloc() for virtual DMA devices")
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Link: https://patch.msgid.link/aJjcPjL1BVh8QrMN@bhairav-test.ee.iitb.ac.in
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This maintainer's email no longer works. Remove it from MAINTAINERS.
This still leaves one maintainer for the driver.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Cc: linux-rdma@vger.kernel.org
Link: https://patch.msgid.link/20250808175601.EF0AF767@davehans-spike.ostc.intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
memset the PBL page pointer and page map arrays before
populating the SGL addresses of the HWQ.
Fixes: 0c4dcd602817 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
Signed-off-by: Anantha Prabhu <anantha.prabhu@broadcom.com>
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250805101000.233310-5-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The GID context reuse logic requires the context memory to be
not freed if and when DEL_GID firmware command fails. But, if
there's no subsequent ADD_GID to reuse it, the context memory
must be freed when the driver is unloaded. Otherwise it leads
to a memory leak.
Below is the kmemleak trace reported:
unreferenced object 0xffff88817a4f34d0 (size 8):
comm "insmod", pid 1072504, jiffies 4402561550
hex dump (first 8 bytes):
01 00 00 00 00 00 00 00 ........
backtrace (crc ccaa009e):
__kmalloc_cache_noprof+0x33e/0x400
0xffffffffc2db9d48
add_modify_gid+0x5e0/0xb60 [ib_core]
__ib_cache_gid_add+0x213/0x350 [ib_core]
update_gid+0xf2/0x180 [ib_core]
enum_netdev_ipv4_ips+0x3f3/0x690 [ib_core]
enum_all_gids_of_dev_cb+0x125/0x1b0 [ib_core]
ib_enum_roce_netdev+0x14b/0x250 [ib_core]
ib_cache_setup_one+0x2e5/0x540 [ib_core]
ib_register_device+0x82c/0xf10 [ib_core]
0xffffffffc2df5ad9
0xffffffffc2da8b07
0xffffffffc2db174d
auxiliary_bus_probe+0xa5/0x120
really_probe+0x1e4/0x850
__driver_probe_device+0x18f/0x3d0
Fixes: 4a62c5e9e2e1 ("RDMA/bnxt_re: Do not free the ctx_tbl entry if delete GID fails")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250805101000.233310-4-kalesh-anakkur.purayil@broadcom.com
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
There should not be any checks of current workload to set
srq_limit value to SRQ hw context.
Remove all such workload checks and make a direct call to
set srq_limit via doorbell SRQ_ARM.
Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250805101000.233310-3-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Whenever SRQ is created, make sure SRQ arm enable is always
set. Driver is always ready to receive SRQ ASYNC event.
Additional note -
There is no need to do srq arm enable conditionally.
See bnxt_qplib_armen_db in bnxt_qplib_create_cq().
Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Link: https://patch.msgid.link/20250805101000.233310-2-kalesh-anakkur.purayil@broadcom.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When using DIP algorithm, all QPs establishing connections with
the same destination IP share the same SCC, which is indexed by
dip_idx, but dip_idx isn't necessarily equal to qpn. Therefore,
dip_idx should be used to query SCC context instead of qpn.
Fixes: 124a9fbe43aa ("RDMA/hns: Append SCC context to the raw dump of QPC")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250726075345.846957-1-huangjunxian6@hisilicon.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When there is no active zone limit, we can technically write into any
number of zones at the same time. However, exceeding the max open zones can
degrade performance. To prevent this, set the max_active_zones to
bdev_max_open_zones() if there is no active zone limit.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since commit 13bb483d32ab ("btrfs: zoned: activate metadata block group on
write time"), we activate a metadata block group at the write time. If the
zone capacity is small enough, we can allocate the entire region before the
first write. Then, we hit the btrfs_zoned_bg_is_full() in
btrfs_zone_activate() and the activation fails.
For a data block group, we activate it at the allocation time and we should
check the fullness condition in the caller side. Add, a WARN to check the
fullness condition.
For a metadata block group, we don't need the fullness check because we
activate it at the write time. Instead, activating it once it is written
should be invalid. Catch that with a WARN too.
Fixes: 13bb483d32ab ("btrfs: zoned: activate metadata block group on write time")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_zoned_reserve_data_reloc_bg() is called on mount and at that point,
all data block groups belong to the primary data space_info. So, we don't
find anything in the data relocation space_info.
Also, the condition "bg->used > 0" can select a block group with full of
zone_unusable bytes for the candidate. As we cannot allocate from the block
group, it is useless to reserve it as the data relocation block group.
Furthermore, because of the space_info separation, we need to migrate the
selected block group to the data relocation space_info. If not, the extent
allocator cannot use the block group to do the allocation.
This commit fixes these three issues.
Fixes: e606ff985ec7 ("btrfs: zoned: reserve data_reloc block group on mount")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Don't call ZONE FINISH for conventional zones as this will result in I/O
errors. Instead check if the zone that needs finishing is a conventional
zone and if yes skip it.
Also factor out the actual handling of finishing a single zone into a
helper function, as do_zone_finish() is growing ever bigger and the
indentations levels are getting higher.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The QPN of the GSI QP was not set, which may cause issues.
Set the QPN to 1 when creating the GSI QP.
Fixes: 999a0a2e9b87 ("RDMA/erdma: Support UD QPs and UD WRs")
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Boshi Yu <boshiyu@linux.alibaba.com>
Link: https://patch.msgid.link/20250725055410.67520-4-boshiyu@linux.alibaba.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The init_kernel_qp interface may fail. Check its return value and free
related resources properly when it does.
Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation")
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Boshi Yu <boshiyu@linux.alibaba.com>
Link: https://patch.msgid.link/20250725055410.67520-3-boshiyu@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When skb packets are sent out, these skb packets still depends on
the rxe resources, for example, QP, sk, when these packets are
destroyed.
If these rxe resources are released when the skb packets are destroyed,
the call traces will appear.
To avoid skb packets hang too long time in some network devices,
a timestamp is added when these skb packets are created. If these
skb packets hang too long time in network devices, these network
devices can free these skb packets to release rxe resources.
Reported-by: syzbot+8425ccfb599521edb153@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8425ccfb599521edb153
Tested-by: syzbot+8425ccfb599521edb153@syzkaller.appspotmail.com
Fixes: 1a633bdc8fd9 ("RDMA/rxe: Let destroy qp succeed with stuck packet")
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20250726013104.463570-1-yanjun.zhu@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The __clear_task_blocked_on() helper added a number of sanity
checks ensuring we hold the mutex wait lock and that the task
we are clearing blocked_on pointer (if set) matches the mutex.
However, there is an edge case in the _ww_mutex_wound() logic
where we need to clear the blocked_on pointer for the task that
owns the mutex, not the task that is waiting on the mutex.
For this case the sanity checks aren't valid, so handle this
by allowing a NULL lock to skip the additional checks.
K Prateek Nayak and Maarten Lankhorst also pointed out that in
this case where we don't hold the owner's mutex wait_lock, we
need to be a bit more careful using READ_ONCE/WRITE_ONCE in both
the __clear_task_blocked_on() and __set_task_blocked_on()
implementations to avoid accidentally tripping WARN_ONs if two
instances race. So do that here as well.
This issue was easier to miss, I realized, as the test-ww_mutex
driver only exercises the wait-die class of ww_mutexes. I've
sent a patch[1] to address this so the logic will be easier to
test.
[1]: https://lore.kernel.org/lkml/20250801023358.562525-2-jstultz@google.com/
Fixes: a4f0b6fef4b0 ("locking/mutex: Add p->blocked_on wrappers for correctness checks")
Closes: https://lore.kernel.org/lkml/68894443.a00a0220.26d0e1.0015.GAE@google.com/
Reported-by: syzbot+602c4720aed62576cd79@syzkaller.appspotmail.com
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20250805001026.2247040-1-jstultz@google.com
|
|
A chain/flowtable update with duplicated devices in the same batch is
possible. Unfortunately, netdev event path only removes the first
device that is found, leaving unregistered the hook of the duplicated
device.
Check if a duplicated device exists in the transaction batch, bail out
with EEXIST in such case.
WARNING is hit when unregistering the hook:
[49042.221275] WARNING: CPU: 4 PID: 8425 at net/netfilter/core.c:340 nf_hook_entry_head+0xaa/0x150
[49042.221375] CPU: 4 UID: 0 PID: 8425 Comm: nft Tainted: G S 6.16.0+ #170 PREEMPT(full)
[...]
[49042.221382] RIP: 0010:nf_hook_entry_head+0xaa/0x150
Fixes: 78d9f48f7f44 ("netfilter: nf_tables: add devices to existing flowtable")
Fixes: b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
The estimator kthreads' affinity are defined by sysctl overwritten
preferences and applied through a plain call to the scheduler's affinity
API.
However since the introduction of managed kthreads preferred affinity,
such a practice shortcuts the kthreads core code which eventually
overwrites the target to the default unbound affinity.
Fix this with using the appropriate kthread's API.
Fixes: d1a89197589c ("kthread: Default affine kthread to its preferred NUMA node")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Blamed commit broke the check for a null scratch map:
- if (unlikely(!m || !*raw_cpu_ptr(m->scratch)))
+ if (unlikely(!raw_cpu_ptr(m->scratch)))
This should have been "if (!*raw_ ...)".
Use the pattern of the avx2 version which is more readable.
This can only be reproduced if avx2 support isn't available.
Fixes: d8d871a35ca9 ("netfilter: nft_set_pipapo: merge pipapo_get/lookup")
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Replace kmalloc(size * sizeof) with kmalloc_array() for safer memory
allocation and overflow prevention.
Cc: stable@kernel.org
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://patch.msgid.link/20250811125816.570142-1-liaoyuanhong@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In a filesystem with a block size larger than 4KB, the hole length
calculation for a non-extent inode in ext4_ind_map_blocks() can easily
exceed INT_MAX. Then it could return a zero length hole and trigger the
following waring and infinite in the iomap infrastructure.
------------[ cut here ]------------
WARNING: CPU: 3 PID: 434101 at fs/iomap/iter.c:34 iomap_iter_done+0x148/0x190
CPU: 3 UID: 0 PID: 434101 Comm: fsstress Not tainted 6.16.0-rc7+ #128 PREEMPT(voluntary)
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : iomap_iter_done+0x148/0x190
lr : iomap_iter+0x174/0x230
sp : ffff8000880af740
x29: ffff8000880af740 x28: ffff0000db8e6840 x27: 0000000000000000
x26: 0000000000000000 x25: ffff8000880af830 x24: 0000004000000000
x23: 0000000000000002 x22: 000001bfdbfa8000 x21: ffffa6a41c002e48
x20: 0000000000000001 x19: ffff8000880af808 x18: 0000000000000000
x17: 0000000000000000 x16: ffffa6a495ee6cd0 x15: 0000000000000000
x14: 00000000000003d4 x13: 00000000fa83b2da x12: 0000b236fc95f18c
x11: ffffa6a4978b9c08 x10: 0000000000001da0 x9 : ffffa6a41c1a2a44
x8 : ffff8000880af5c8 x7 : 0000000001000000 x6 : 0000000000000000
x5 : 0000000000000004 x4 : 000001bfdbfa8000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000004004030000 x0 : 0000000000000000
Call trace:
iomap_iter_done+0x148/0x190 (P)
iomap_iter+0x174/0x230
iomap_fiemap+0x154/0x1d8
ext4_fiemap+0x110/0x140 [ext4]
do_vfs_ioctl+0x4b8/0xbc0
__arm64_sys_ioctl+0x8c/0x120
invoke_syscall+0x6c/0x100
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x38/0x120
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x1a0
---[ end trace 0000000000000000 ]---
Cc: stable@kernel.org
Fixes: facab4d9711e ("ext4: return hole from ext4_map_blocks()")
Reported-by: Qu Wenruo <wqu@suse.com>
Closes: https://lore.kernel.org/linux-ext4/9b650a52-9672-4604-a765-bb6be55d1e4a@gmx.com/
Tested-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250811064532.1788289-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When the file system is frozen in preparation for taking an LVM
snapshot, the journal is checkpointed and if the orphan_file feature
is enabled, and the orphan file is empty, we clear the orphan_present
feature flag. But if there are pending inodes that need to be removed
the orphan_present feature flag can't be cleared.
The problem comes if the block device is read-only. In that case, we
can't process the orphan inode list, so it is skipped in
ext4_orphan_cleanup(). But then in ext4_mark_recovery_complete(),
this results in the ext4 error "Orphan file not empty on read-only fs"
firing and the file system mount is aborted.
Fix this by clearing the needs_recovery flag in the block device is
read-only. We do this after the call to ext4_load_and_init-journal()
since there are some error checks need to be done in case the journal
needs to be replayed and the block device is read-only, or if the
block device containing the externa journal is read-only, etc.
Cc: stable@kernel.org
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1108271
Cc: stable@vger.kernel.org
Fixes: 02f310fcf47f ("ext4: Speedup ext4 orphan inode handling")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In some cases like small FSes with no meta_bg and where the resize
doesn't need extra gdt blocks as it can fit in the current one,
s_reserved_gdt_blocks is set as 0, which causes fsmap to emit a 0
length entry, which is incorrect.
$ mkfs.ext4 -b 65536 -O bigalloc /dev/sda 5G
$ mount /dev/sda /mnt/scratch
$ xfs_io -c "fsmap -d" /mnt/scartch
0: 253:48 [0..127]: static fs metadata 128
1: 253:48 [128..255]: special 102:1 128
2: 253:48 [256..255]: special 102:2 0 <---- 0 len entry
3: 253:48 [256..383]: special 102:3 128
Fix this by adding a check for this case.
Cc: stable@kernel.org
Fixes: 0c9ec4beecac ("ext4: support GETFSMAP ioctls")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/08781b796453a5770112aa96ad14c864fbf31935.1754377641.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
With bigalloc enabled, the logic to report last extent has a bug since
we try to use cluster units instead of block units. This can cause an
issue where extra incorrect entries might be returned back to the
user. This was flagged by generic/365 with 64k bs and -O bigalloc.
** Details of issue **
The issue was noticed on 5G 64k blocksize FS with -O bigalloc which has
only 1 bg.
$ xfs_io -c "fsmap -d" /mnt/scratch
0: 253:48 [0..127]: static fs metadata 128 /* sb */
1: 253:48 [128..255]: special 102:1 128 /* gdt */
3: 253:48 [256..383]: special 102:3 128 /* block bitmap */
4: 253:48 [384..2303]: unknown 1920 /* flex bg empty space */
5: 253:48 [2304..2431]: special 102:4 128 /* inode bitmap */
6: 253:48 [2432..4351]: unknown 1920 /* flex bg empty space */
7: 253:48 [4352..6911]: inodes 2560
8: 253:48 [6912..538623]: unknown 531712
9: 253:48 [538624..10485759]: free space 9947136
The issue can be seen with:
$ xfs_io -c "fsmap -d 0 3" /mnt/scratch
0: 253:48 [0..127]: static fs metadata 128
1: 253:48 [384..2047]: unknown 1664
Only the first entry was expected to be returned but we get 2. This is
because:
ext4_getfsmap_datadev()
first_cluster, last_cluster = 0
...
info->gfi_last = true;
ext4_getfsmap_datadev_helper(sb, end_ag, last_cluster + 1, 0, info);
fsb = C2B(1) = 16
fslen = 0
...
/* Merge in any relevant extents from the meta_list */
list_for_each_entry_safe(p, tmp, &info->gfi_meta_list, fmr_list) {
...
// since fsb = 16, considers all metadata which starts before 16 blockno
iter 1: error = ext4_getfsmap_helper(sb, info, p); // p = sb (0,1), nop
info->gfi_next_fsblk = 1
iter 2: error = ext4_getfsmap_helper(sb, info, p); // p = gdt (1,2), nop
info->gfi_next_fsblk = 2
iter 3: error = ext4_getfsmap_helper(sb, info, p); // p = blk bitmap (2,3), nop
info->gfi_next_fsblk = 3
iter 4: error = ext4_getfsmap_helper(sb, info, p); // p = ino bitmap (18,19)
if (rec_blk > info->gfi_next_fsblk) { // (18 > 3)
// emits an extra entry ** BUG **
}
}
Fix this by directly calling ext4_getfsmap_datadev() with a dummy
record that has fmr_physical set to (end_fsb + 1) instead of
last_cluster + 1. By using the block instead of cluster we get the
correct behavior.
Replacing ext4_getfsmap_datadev_helper() with ext4_getfsmap_helper()
is okay since the gfi_lastfree and metadata checks in
ext4_getfsmap_datadev_helper() are anyways redundant when we only want
to emit the last allocated block of the range, as we have already
taken care of emitting metadata and any last free blocks.
Cc: stable@kernel.org
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Fixes: 4a622e4d477b ("ext4: fix FS_IOC_GETFSMAP handling")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/e7472c8535c9c5ec10f425f495366864ea12c9da.1754377641.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
GFP_NOWAIT already includes __GFP_NOWARN, so let's remove
the redundant __GFP_NOWARN.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://patch.msgid.link/20250803102243.623705-4-rongqianfeng@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Cc: stable@kernel.org
Fixes: 90f097b1403f ("ext4: refactor the inline directory conversion and...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This if branch is only jumping to 'out' which
is defined just after the branch itself.
Hence this is if-check is a no-op and can be removed.
Address-Coverity-ID: 1647981 ("Incorrect expression (IDENTICAL_BRANCHES)")
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Link: https://patch.msgid.link/20250721200902.1071-1-antonio@mandelbit.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The check for a fast symlink in the presence of only an
external xattr inode is incorrect. If a fast symlink does
not have an xattr block (i_file_acl == 0), but does have
an external xattr inode that increases inode i_blocks, then
the check for a fast symlink will incorrectly fail and
__ext4_iget()->ext4_ind_check_inode() will report the inode
is corrupt when it "validates" i_data[] on the next read:
# ln -s foo /mnt/tmp/bar
# setfattr -h -n trusted.test \
-v "$(yes | head -n 4000)" /mnt/tmp/bar
# umount /mnt/tmp
# mount /mnt/tmp
# ls -l /mnt/tmp
ls: cannot access '/mnt/tmp/bar': Structure needs cleaning
total 4
? l?????????? ? ? ? ? ? bar
# dmesg | tail -1
EXT4-fs error (device dm-8): __ext4_iget:5098:
inode #24578: block 7303014: comm ls: invalid block
(note that "block 7303014" = 0x6f6f66 = "foo" in LE order).
ext4_inode_is_fast_symlink() should check the superblock
EXT4_FEATURE_INCOMPAT_EA_INODE feature flag, not the inode
EXT4_EA_INODE_FL, since the latter is only set on the xattr
inode itself, and not on the inode that uses this xattr.
Cc: stable@vger.kernel.org
Fixes: fc82228a5e38 ("ext4: support fast symlinks from ext3 file systems")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Li Dongyang <dongyangli@ddn.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/59879
Lustre-bug-id: https://jira.whamcloud.com/browse/LU-19121
Link: https://patch.msgid.link/20250717063709.757077-1-adilger@dilger.ca
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
IMA testing revealed that after an ext4 remount, file accesses triggered
full measurements even without modifications, instead of skipping as
expected when i_version is unchanged.
Debugging showed `SB_I_VERSION` was cleared in reconfigure_super() during
remount due to commit 1ff20307393e ("ext4: unconditionally enable the
i_version counter") removing the fix from commit 960e0ab63b2e ("ext4: fix
i_version handling on remount").
To rectify this, `SB_I_VERSION` is always set for `fc->sb_flags` in
ext4_init_fs_context(), instead of `sb->s_flags` in __ext4_fill_super(),
ensuring it persists across all mounts.
Cc: stable@kernel.org
Fixes: 1ff20307393e ("ext4: unconditionally enable the i_version counter")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250703073903.6952-2-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Check a race where data disappears from the TCP socket after
TLS signaled that its ready to receive.
ok 6 global.data_steal
# RUN tls_basic.base_base ...
# OK tls_basic.base_base
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250807232907.600366-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TLS expects that it owns the receive queue of the TCP socket.
This cannot be guaranteed in case the reader of the TCP socket
entered before the TLS ULP was installed, or uses some non-standard
read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy
early exit (which leaves anchor pointing to a freed skb) with real
error handling. Wipe the parsing state and tell the reader to retry.
We already reload the anchor every time we (re)acquire the socket lock,
so the only condition we need to avoid is an out of bounds read
(not having enough bytes in the socket for previously parsed record len).
If some data was read from under TLS but there's enough in the queue
we'll reload and decrypt what is most likely not a valid TLS record.
Leading to some undefined behavior from TLS perspective (corrupting
a stream? missing an alert? missing an attack?) but no kernel crash
should take place.
Reported-by: William Liu <will@willsroot.io>
Reported-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://lore.kernel.org/tFjq_kf7sWIG3A7CrCg_egb8CVsT_gsmHAK0_wxDPJXfIzxFAMxqmLwp3MlU5EHiet0AwwJldaaFdgyHpeIUCS-3m3llsmRzp9xIOBR4lAI=@syst3mfailure.io
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250807232907.600366-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull in outstanding commits for 6.17.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Display `i_version` in `/proc/fs/ext4/sdx/options`, even though it's
default enabled. This aids users managing multi-version scenarios and
simplifies debugging.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250703073903.6952-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
syzbot reported the following ABBA deadlock:
CPU0 CPU1
---- ----
n_vclocks_store()
lock(&ptp->n_vclocks_mux) [1]
(physical clock)
pc_clock_adjtime()
lock(&clk->rwsem) [2]
(physical clock)
...
ptp_clock_freerun()
ptp_vclock_in_use()
lock(&ptp->n_vclocks_mux) [3]
(physical clock)
ptp_clock_unregister()
posix_clock_unregister()
lock(&clk->rwsem) [4]
(virtual clock)
Since ptp virtual clock is registered only under ptp physical clock, both
ptp_clock and posix_clock must be physical clocks for ptp_vclock_in_use()
to lock &ptp->n_vclocks_mux and check ptp->n_vclocks.
However, when unregistering vclocks in n_vclocks_store(), the locking
ptp->n_vclocks_mux is a physical clock lock, but clk->rwsem of
ptp_clock_unregister() called through device_for_each_child_reverse()
is a virtual clock lock.
Therefore, clk->rwsem used in CPU0 and clk->rwsem used in CPU1 are
different locks, but in lockdep, a false positive occurs because the
possibility of deadlock is determined through lock-class.
To solve this, lock subclass annotation must be added to the posix_clock
rwsem of the vclock.
Reported-by: syzbot+7cfb66a237c4a5fb22ad@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7cfb66a237c4a5fb22ad
Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250728062649.469882-1-aha310510@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
found/fixed the following typo
- Availablity -> Availability
in `Documentation/admin-guide/cgroup-v2.rst`
Signed-off-by: Soham Metha <sohammetha01@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
