summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-02-16Bluetooth: Add Atheros BT AR5BBU12 fw supportedCho, Yu-Chen
Add the btusb.c blacklist [0489:e02c] for Atheros AR5BBU12 BT and add to ath3k.c supported this device. Signed-off-by: Cho, Yu-Chen <acho@novell.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: Release BTM while sleeping to avoid deadlockVladislav P
Signed-off-by: Vladislav P <vladisslav@inbox.ru> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16Bluetooth: fix crash with quirky dongles doing soundOliver Neukum
Quirky dongles sometimes do not use the iso interface which causes a crash with runtime PM Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-16workqueue: make sure MAYDAY_INITIAL_TIMEOUT is at least 2 jiffies longTejun Heo
MAYDAY_INITIAL_TIMEOUT is defined as HZ / 100 and depending on configuration may end up 0 or 1. Even when it's 1, depending on when the mayday timer is added in the current jiffy interval, it may expire way before a jiffy has passed. Make sure MAYDAY_INITIAL_TIMEOUT is at least two to guarantee that at least a full jiffy has passed before calling rescuers. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Ray Jui <rjui@broadcom.com> Cc: stable@kernel.org
2011-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] qla2xxx: Return DID_NO_CONNECT when FC device is lost. [SCSI] mptfusion: Bump version 03.04.18 [SCSI] mptfusion: Fix Incorrect return value in mptscsih_dev_reset [SCSI] mptfusion: mptctl_release is required in mptctl.c [SCSI] target: fix use after free detected by SLUB poison [SCSI] target: Remove procfs based target_core_mib.c code [SCSI] target: Fix SCF_SCSI_CONTROL_SG_IO_CDB breakage [SCSI] target: Fix top-level configfs_subsystem default_group shutdown breakage [SCSI] target: fixed missing lock drop in error path [SCSI] target: Fix demo-mode MappedLUN shutdown UA/PR breakage [SCSI] target/iblock: Fix failed bd claim NULL pointer dereference [SCSI] target: iblock/pscsi claim checking for NULL instead of IS_ERR [SCSI] scsi_debug: Fix 32-bit overflow in do_device_access causing memory corruption [SCSI] qla2xxx: Change from irq to irqsave with host_lock [SCSI] qla2xxx: Fix race that could hang kthread_stop()
2011-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha-s390 - Reset index after processing partial block
2011-02-16vfs: fix BUG_ON() in fs/namei.c:1461Linus Torvalds
When Al moved the nameidata_dentry_drop_rcu_maybe() call into the do_follow_link function in commit 844a391799c2 ("nothing in do_follow_link() is going to see RCU"), he mistakenly left the BUG_ON(inode != path->dentry->d_inode); behind. Which would otherwise be ok, but that BUG_ON() really needs to be _after_ dropping RCU, since the dentry isn't necessarily stable otherwise. So complete the code movement in that commit, and move the BUG_ON() into do_follow_link() too. This means that we need to pass in 'inode' as an argument (just for this one use), but that's a small thing. And eventually we may be confident enough in our path lookup that we can just remove the BUG_ON() and the unnecessary inode argument. Reported-and-tested-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-16workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable'Tejun Heo
There are two spellings in use for 'freeze' + 'able' - 'freezable' and 'freezeable'. The former is the more prominent one. The latter is mostly used by workqueue and in a few other odd places. Unify the spelling to 'freezable'. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Dubov <oakad@yahoo.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Steven Whitehouse <swhiteho@redhat.com>
2011-02-16perf tools: Update Makefile with some helpJesse Brandeburg
The perf makefile is nicely complete except for a) an uninstall option b) a 'make help' description This patch implements b) it also comments out other non-working makefile targets Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-16perf annotate browser: Use the percent color for the whole lineArnaldo Carvalho de Melo
Not just for the percentage number, to see the hot lines more easily. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-16perf annotate: Check if offset is less than symbol sizeArnaldo Carvalho de Melo
Just like done on symbol__inc_addr_samples to catch misparsed offsets from objdump. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-16perf ui: Serialize screen updatesArnaldo Carvalho de Melo
The ui operations so far were used by just one thread, but 'perf top --tui' now has two threads updating the screen, so we need to use a mutex to avoid garbling the screen. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-02-16hwmon: (jc42) do not allow writing to locked registersClemens Ladisch
On systems where the temperature sensor is actually used, the BIOS is likely to have locked the alarm registers. In that case, all writes through the corresponding sysfs files would be silently ignored. To prevent this, detect the locks and make the affected sysfs files read-only. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: stable@kernel.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-16hwmon: (jc42) more helpful documentationClemens Ladisch
The documentation lists standard numbers and chip names in excruciating detail, but that's all it does. To help mere mortals in deciding whether to enable this driver, mention what this sensor is for and in which systems it might be found. Also add a link to the actual JC 42.4 specification. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: stable@kernel.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-16hwmon: (jc42) fix type mismatchClemens Ladisch
In set_temp_crit_hyst(), make the variable 'val' have the correct type for strict_strtoul(). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: stable@kernel.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-16perf: Optimize hrtimer eventsPeter Zijlstra
There is no need to re-initialize the hrtimer every time we start it, so don't do that (shaves a few cycles). Also, since we know hrtimers run at a fixed rate (nanoseconds) we can pre-compute the desired frequency at which they tick. This avoids us having to go through the whole adaptive frequency feedback logic (shaves another few cycles). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1297448589.5226.47.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-16perf: Optimize throttling codePeter Zijlstra
By pre-computing the maximum number of samples per tick we can avoid a multiplication and a conditional since MAX_INTERRUPTS > max_samples_per_tick. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-16perf, x86: Add support for AMD family 15h core countersRobert Richter
This patch adds support for AMD family 15h core counters. There are major changes compared to family 10h. First, there is a new perfctr msr range for up to 6 counters. Northbridge counters are separate now. This patch only adds support for core counters. Second, certain events may only be scheduled on certain counters. For this we need to extend the event scheduling and constraints. We use cpu feature flags to calculate family 15h msr address offsets. This way we later can implement a faster ALTERNATIVE() version for this. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110215135210.GB5874@erda.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-16perf, x86: Store perfctr msr addresses in config_base/event_baseRobert Richter
Instead of storing the base addresses we can store the counter's msr addresses directly in config_base/event_base of struct hw_perf_event. This avoids recalculating the address with each msr access. The addresses are configured one time. We also need this change to later modify the address calculation. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1296664860-10886-5-git-send-email-robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-16perf, x86: Add new AMD family 15h msrs to perfctr reservation codeRobert Richter
This patch allows the reservation of perfctrs with new msr addresses introduced for AMD cpu family 15h (0xc0010200/0xc0010201, etc). Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1296664860-10886-4-git-send-email-robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-16perf, x86: Calculate perfctr msr addresses in helper functionsRobert Richter
This patch adds helper functions to calculate perfctr msr addresses. We need this to later add support for AMD family 15h cpus. For this we have to change the algorithms to generate the perfctr's msr addresses. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1296664860-10886-3-git-send-email-robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-16perf, x86: Use helper function in x86_pmu_enable_all()Robert Richter
Use helper function in x86_pmu_enable_all() to minimize access to x86_pmu.eventsel in the fast path. The counter's msr address is now calculated using struct hw_perf_event. Later we add code that calculates the msr addresses with a table lookup which shouldn't be done in the fast path. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1296664860-10886-2-git-send-email-robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-16perf tool: Add cgroup supportStephane Eranian
This patch adds the ability to filter monitoring based on container groups (cgroups) for both perf stat and perf record. It is possible to monitor multiple cgroup in parallel. There is one cgroup per event. The cgroups to monitor are passed via a new -G option followed by a comma separated list of cgroup names. The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool finds the corresponding directory in the cgroup filesystem and opens it. It then passes that file descriptor to the kernel. Example: $ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1 Performance counter stats for 'sleep 1': 2,368,667,414 cycles test1 2,369,661,459 cycles <not counted> cycles test2 1.001856890 seconds time elapsed Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-16perf: Add cgroup supportStephane Eranian
This kernel patch adds the ability to filter monitoring based on container groups (cgroups). This is for use in per-cpu mode only. The cgroup to monitor is passed as a file descriptor in the pid argument to the syscall. The file descriptor must be opened to the cgroup name in the cgroup filesystem. For instance, if the cgroup name is foo and cgroupfs is mounted in /cgroup, then the file descriptor is opened to /cgroup/foo. Cgroup mode is activated by passing PERF_FLAG_PID_CGROUP in the flags argument to the syscall. For instance to measure in cgroup foo on CPU1 assuming cgroupfs is mounted under /cgroup: struct perf_event_attr attr; int cgroup_fd, fd; cgroup_fd = open("/cgroup/foo", O_RDONLY); fd = perf_event_open(&attr, cgroup_fd, 1, -1, PERF_FLAG_PID_CGROUP); close(cgroup_fd); Signed-off-by: Stephane Eranian <eranian@google.com> [ added perf_cgroup_{exit,attach} ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d590250.114ddf0a.689e.4482@mx.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-16cgroup: Fix cgroup_subsys::exit callbackPeter Zijlstra
Make the ::exit method act like ::attach, it is after all very nearly the same thing. The bug had no effect on correctness - fixing it is an optimization for the scheduler. Also, later perf-cgroups patches rely on it. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Menage <menage@google.com> LKML-Reference: <1297160655.13327.92.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-16Merge branch 'perf/urgent' into perf/coreIngo Molnar
Merge reason: we need to queue up dependent patch Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-16perf: Fix throttle logicPeter Zijlstra
It was possible to call pmu::start() on an already running event. In particular this lead so some wreckage as the hrtimer events would re-initialize active timers. This was due to throttled events being activated again by scheduling. Scheduling in a context would add and force start events, resulting in running events with a possible throttle status. The next tick to hit that task will then try to unthrottle the event and call ->start() on an already running event. Reported-by: Jeff Moyer <jmoyer@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-16perf, x86: P4 PMU: Fix spurious NMI messagesCyrill Gorcunov
Several people have reported spurious unknown NMI messages on some P4 CPUs. This patch fixes it by checking for an overflow (negative counter values) directly, instead of relying on the P4_CCCR_OVF bit. Reported-by: George Spelvin <linux@horizon.com> Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Don Zickus <dzickus@redhat.com> Reported-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <AANLkTinfuTfCck_FfaOHrDqQZZehtRzkBum4SpFoO=KJ@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-15Linux 2.6.38-rc5v2.6.38-rc5Linus Torvalds
2011-02-16md: correctly handle probe of an 'mdp' device.NeilBrown
'mdp' devices are md devices with preallocated device numbers for partitions. As such it is possible to mknod and open a partition before opening the whole device. this causes md_probe() to be called with a device number of a partition, which in-turn calls mddev_find with such a number. However mddev_find expects the number of a 'whole device' and does the wrong thing with partition numbers. So add code to mddev_find to remove the 'partition' part of a device number and just work with the 'whole device'. This patch addresses https://bugzilla.kernel.org/show_bug.cgi?id=28652 Reported-by: hkmaly@bigfoot.com Signed-off-by: NeilBrown <neilb@suse.de> Cc: <stable@kernel.org>
2011-02-16md: don't set_capacity before array is active.NeilBrown
If the desired size of an array is set (via sysfs) before the array is active (which is the normal sequence), we currrently call set_capacity immediately. This means that a subsequent 'open' (as can be caused by some udev-triggers program) will notice the new size and try to probe for partitions. However as the array isn't quite ready yet the read will fail. Then when the array is read, as the size doesn't change again we don't try to re-probe. So when setting array size via sysfs, only call set_capacity if the array is already active. Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: set flow handler for secondary interrupt controller of 5249 m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform support m68knommu: fix dereference of port.tty m68knommu: add missing linker __modver section m68knommu: fix mis-named variable int set_irq_chip loop m68knommu: add optimize memmove() function m68k: remove arch specific non-optimized memcmp() m68knommu: fix use of un-defined _TIF_WORK_MASK m68knommu: Rename m548x_wdt.c to m54xx_wdt.c m68knommu: fix m548x_wdt.c compilation after headers renaming m68knommu: Remove dependencies on nonexistent M68KNOMMU
2011-02-16m68knommu: set flow handler for secondary interrupt controller of 5249Greg Ungerer
The secondary interrupt controller of the ColdFire 5249 code is not setting the edge triggered flow handler. Set it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform supportGreg Ungerer
The m68knommu arch does not define or use IRQ_FLG_LOCK in its irq subsystem. Remove obsolete use of it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68knommu: fix dereference of port.ttyGreg Ungerer
The struct_tty associated with a port is now a direct pointer from within the local private driver info struct. So fix all uses of it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68knommu: add missing linker __modver sectionGreg Ungerer
Add missing linker section __modver to fix: LD vmlinux /usr/local/bin/../m68k-uclinux/bin/ld.real: error: no memory region specified for loadable section `__modver' Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68knommu: fix mis-named variable int set_irq_chip loopGreg Ungerer
Compiling for 68360 targets gives: CC arch/m68knommu/platform/68360/ints.o arch/m68knommu/platform/68360/ints.c: In function ‘init_IRQ’: arch/m68knommu/platform/68360/ints.c:135:16: error: ‘irq’ undeclared (first use in this function) arch/m68knommu/platform/68360/ints.c:135:16: note: each undeclared identifier is reported only once for each function it appears in Fix variable name used. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68knommu: add optimize memmove() functionGreg Ungerer
Add an m68k/coldfire optimized memmove() function for the m68knommu arch. This is the same function as used by m68k. Simple speed tests show this is faster once buffers are larger than 4 bytes, and significantly faster on much larger buffers (4 times faster above about 100 bytes). This also goes part of the way to fixing a regression caused by commit ea61bc461d09e8d331a307916530aaae808c72a2 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memmove() fucntion defined, since there was none in the m68knommu/lib functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16m68k: remove arch specific non-optimized memcmp()Greg Ungerer
The m68k arch implements its own memcmp() function. It is not optimized in any way (it is the most strait forward coding of memcmp you can get). Remove it and use the kernels standard memcmp() implementation. This also goes part of the way to fixing a regression caused by commit ea61bc461d09e8d331a307916530aaae808c72a2 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memcmp() function defined, since there is none in the m68knommu/lib functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-02-15Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (27 commits) drm/radeon/kms: hopefully fix pll issues for real (v3) drm/radeon/kms: add bounds checking to avivo pll algo drm: fix wrong usages of drm_device in DRM Developer's Guide drm/radeon/kms: fix a few more atombios endian issues drm/radeon/kms: improve 6xx/7xx CS error output drm/radeon/kms: check AA resolve registers on r300 drm/radeon/kms: fix tracking of BLENDCNTL, COLOR_CHANNEL_MASK, and GB_Z on r300 drm/radeon/kms: use linear aligned for evergreen/ni bo blits drm/radeon/kms: use linear aligned for 6xx/7xx bo blits drm/radeon: fix race between GPU reset and TTM delayed delete thread. drm/radeon/kms: evergreen/ni big endian fixes (v2) drm/radeon/kms: 6xx/7xx big endian fixes drm/radeon/kms: atombios big endian fixes drm/radeon: 6xx/7xx non-kms endian fixes drm/radeon/kms: optimize CS state checking for r100->r500 drm: do not leak kernel addresses via /proc/dri/*/vma drm/radeon/kms: add connector table for mac g5 9600 radeon mkregtable: Add missing fclose() calls drm/radeon/kms: fix interlaced modes on dce4+ drm/radeon: fix memory debugging since d961db75ce86a84f1f04e91ad1014653ed7d9f46 ...
2011-02-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: pci: use security_capable() when checking capablities during config space read
2011-02-15thp: prevent hugepages during args/env copying into the user stackAndrea Arcangeli
Transparent hugepages can only be created if rmap is fully functional. So we must prevent hugepages to be created while is_vma_temporary_stack() is true. This also optmizes away some harmless but unnecessary setting of khugepaged_scan.address and it switches some BUG_ON to VM_BUG_ON. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-15Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI / Video: Probe for output switch method when searching video devices. ACPI / Wakeup: Enable button GPEs unconditionally during initialization ACPI / ACPICA: Avoid crashing if _PRW is defined for the root object ACPI: Fix acpi_os_read_memory() and acpi_os_write_memory() (v2)
2011-02-15Merge branch 'tools-release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'tools-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: tools: turbostat: style updates tools: turbostat: fix bitwise and operand
2011-02-15sparc64: Fix NMI startup bug which also breaks perf.David S. Miller
Doing NMI startup as an early initcall doesn't work because we need to have SMP started up by then. So we'd only NMI startup one cpu, which causes perf PMU grab to BUG because the nmi_active count isn't what it's supposed to be. This also points out that we don't have proper CPU up/down notifiers for the NMI code which will need to be fixed at some point. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-15Merge branch 'iomem' into releaseLen Brown
2011-02-15spi/pxa2xx pci: fix the release - remove raceSebastian Andrzej Siewior
Right now the platform device and its platform data is included in one big struct which requires its custom ->release function. The problem with the release function within the driver is that it might be called after the driver was removed because someone was holding a reference to it and it was not called right after platform_device_unregister(). So we also free the platform device memory to which one might hold a reference. This patch uses the normal pdev functions so this kind of race does not occur. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-15isdn: hisax: Use l2headersize() instead of dup (and buggy) func.David S. Miller
There was a bug in my commit c978e7bb77dfd2cd3d1f547fa4e395cfe47f02b2 ("hisax: Fix unchecked alloc_skb() return.") One of the l2->flag checks is wrong. Even worse it turns out I'm duplicating an existing function, so use that instead. Reported-by: Milton Miller <miltonm@bga.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-15Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (21 commits) dmaengine: add slave-dma maintainer dma: ipu_idmac: do not lose valid received data in the irq handler dmaengine: imx-sdma: fix up param for the last BD in sdma_prep_slave_sg() dmaengine: imx-sdma: correct sdmac->status in sdma_handle_channel_loop() dmaengine: imx-sdma: return sdmac->status in sdma_tx_status() dmaengine: imx-sdma: set sdmac->status to DMA_ERROR in err_out of sdma_prep_slave_sg() dmaengine: imx-sdma: remove IMX_DMA_SG_LOOP handling in sdma_prep_slave_sg() dmaengine i.MX dma: initialize dma capabilities outside channel loop dmaengine i.MX DMA: do not initialize chan_id field dmaengine i.MX dma: check sg entries for valid addresses and lengths dmaengine i.MX dma: set maximum segment size for our device dmaengine i.MX SDMA: reserve channel 0 by not registering it dmaengine i.MX SDMA: initialize dma capabilities outside channel loop dmaengine i.MX SDMA: do not initialize chan_id field dmaengine i.MX sdma: check sg entries for valid addresses and lengths dmaengine i.MX sdma: set maximum segment size for our device DMA: PL08x: fix channel pausing to timeout rather than lockup DMA: PL08x: fix infinite wait when terminating transfers dmaengine: imx-sdma: fix inconsistent naming in sdma_assign_cookie() dmaengine: imx-sdma: propagate error in sdma_probe() instead of returning 0 ...
2011-02-15Merge branch 'for-2.6.38' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.38' of git://linux-nfs.org/~bfields/linux: nfsd: break lease on unlink due to rename nfsd4: acquire only one lease per file nfsd4: modify fi_delegations under recall_lock nfsd4: remove unused deleg dprintk's. nfsd4: split lease setting into separate function nfsd4: fix leak on allocation error nfsd4: add helper function for lease setup nfsd4: split up nfsd_break_deleg_cb NFSD: memory corruption due to writing beyond the stat array NFSD: use nfserr for status after decode_cb_op_status nfsd: don't leak dentry count on mnt_want_write failure
generated by cgit (git 2.34.1) at 2025-09-12 13:30:04 +0000