| Age | Commit message (Collapse) | Author |
|---|
|
* kvm-arm64/pkvm-np-guest:
: .
: pKVM support for non-protected guests using the standard MM
: infrastructure, courtesy of Quentin Perret. From the cover letter:
:
: "This series moves the stage-2 page-table management of non-protected
: guests to EL2 when pKVM is enabled. This is only intended as an
: incremental step towards a 'feature-complete' pKVM, there is however a
: lot more that needs to come on top.
:
: With that series applied, pKVM provides near-parity with standard KVM
: from a functional perspective all while Linux no longer touches the
: stage-2 page-tables itself at EL1. The majority of mm-related KVM
: features work out of the box, including MMU notifiers, dirty logging,
: RO memslots and things of that nature. There are however two gotchas:
:
: - We don't support mapping devices into guests: this requires
: additional hypervisor support for tracking the 'state' of devices,
: which will come in a later series. No device assignment until then.
:
: - Stage-2 mappings are forced to page-granularity even when backed by a
: huge page for the sake of simplicity of this series. I'm only aiming
: at functional parity-ish (from userspace's PoV) for now, support for
: HP can be added on top later as a perf improvement."
: .
KVM: arm64: Plumb the pKVM MMU in KVM
KVM: arm64: Introduce the EL1 pKVM MMU
KVM: arm64: Introduce __pkvm_tlb_flush_vmid()
KVM: arm64: Introduce __pkvm_host_mkyoung_guest()
KVM: arm64: Introduce __pkvm_host_test_clear_young_guest()
KVM: arm64: Introduce __pkvm_host_wrprotect_guest()
KVM: arm64: Introduce __pkvm_host_relax_guest_perms()
KVM: arm64: Introduce __pkvm_host_unshare_guest()
KVM: arm64: Introduce __pkvm_host_share_guest()
KVM: arm64: Introduce __pkvm_vcpu_{load,put}()
KVM: arm64: Add {get,put}_pkvm_hyp_vm() helpers
KVM: arm64: Make kvm_pgtable_stage2_init() a static inline function
KVM: arm64: Pass walk flags to kvm_pgtable_stage2_relax_perms
KVM: arm64: Pass walk flags to kvm_pgtable_stage2_mkyoung
KVM: arm64: Move host page ownership tracking to the hyp vmemmap
KVM: arm64: Make hyp_page::order a u8
KVM: arm64: Move enum pkvm_page_state to memory.h
KVM: arm64: Change the layout of enum pkvm_page_state
Signed-off-by: Marc Zyngier <maz@kernel.org>
# Conflicts:
# arch/arm64/kvm/arm.c
|
|
* kvm-arm64/debug-6.14:
: .
: Large rework of the debug code to make it a bit less horrid,
: courtesy of Oliver Upton. From the original cover letter:
:
: "The debug code has become a bit difficult to reason about, especially
: all the hacks and bandaids for state tracking + trap configuration.
:
: This series reworks the entire mess around using a single enumeration to
: track the state of the debug registers (free, guest-owned, host-owned),
: using that to drive trap configuration and save/restore.
:
: On top of that, this series wires most of the implementation into vCPU
: load/put rather than the main KVM_RUN loop. This has been a long time
: coming for VHE, as a lot of the trap configuration and EL1 state gets
: loaded into hardware at that point anyway.
:
: The save/restore of the debug registers is simplified quite a bit as
: well. KVM will now restore the registers for *any* access rather than
: just writes, and keep doing so until the next vcpu_put() instead of
: dropping it on the floor after the next exception."
: .
KVM: arm64: Promote guest ownership for DBGxVR/DBGxCR reads
KVM: arm64: Fold DBGxVR/DBGxCR accessors into common set
KVM: arm64: Avoid reading ID_AA64DFR0_EL1 for debug save/restore
KVM: arm64: nv: Honor MDCR_EL2.TDE routing for debug exceptions
KVM: arm64: Manage software step state at load/put
KVM: arm64: Don't hijack guest context MDSCR_EL1
KVM: arm64: Compute MDCR_EL2 at vcpu_load()
KVM: arm64: Reload vCPU for accesses to OSLAR_EL1
KVM: arm64: Use debug_owner to track if debug regs need save/restore
KVM: arm64: Remove vestiges of debug_ptr
KVM: arm64: Remove debug tracepoints
KVM: arm64: Select debug state to save/restore based on debug owner
KVM: arm64: Clean up KVM_SET_GUEST_DEBUG handler
KVM: arm64: Evaluate debug owner at vcpu_load()
KVM: arm64: Write MDCR_EL2 directly from kvm_arm_setup_mdcr_el2()
KVM: arm64: Move host SME/SVE tracking flags to host data
KVM: arm64: Track presence of SPE/TRBE in kvm_host_data instead of vCPU
KVM: arm64: Get rid of __kvm_get_mdcr_el2() and related warts
KVM: arm64: Drop MDSCR_EL1_DEBUG_MASK
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Introduce the KVM_PGT_CALL() helper macro to allow switching from the
traditional pgtable code to the pKVM version easily in mmu.c. The cost
of this 'indirection' is expected to be very minimal due to
is_protected_kvm_enabled() being backed by a static key.
With this, everything is in place to allow the delegation of
non-protected guest stage-2 page-tables to pKVM, so let's stop using the
host's kvm_s2_mmu from EL2 and enjoy the ride.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-19-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Introduce a set of helper functions allowing to manipulate the pKVM
guest stage-2 page-tables from EL1 using pKVM's HVC interface.
Each helper has an exact one-to-one correspondance with the traditional
kvm_pgtable_stage2_*() functions from pgtable.c, with a strictly
matching prototype. This will ease plumbing later on in mmu.c.
These callbacks track the gfn->pfn mappings in a simple rb_tree indexed
by IPA in lieu of a page-table. This rb-tree is kept in sync with pKVM's
state and is protected by the mmu_lock like a traditional stage-2
page-table.
Signed-off-by: Quentin Perret <qperret@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-18-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Introduce a new hypercall to flush the TLBs of non-protected guests. The
host kernel will be responsible for issuing this hypercall after changing
stage-2 permissions using the __pkvm_host_relax_guest_perms() or
__pkvm_host_wrprotect_guest() paths. This is left under the host's
responsibility for performance reasons.
Note however that the TLB maintenance for all *unmap* operations still
remains entirely under the hypervisor's responsibility for security
reasons -- an unmapped page may be donated to another entity, so a stale
TLB entry could be used to leak private data.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-17-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Plumb the kvm_pgtable_stage2_mkyoung() callback into pKVM for
non-protected guests. It will be called later from the fault handling
path.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-16-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Plumb the kvm_stage2_test_clear_young() callback into pKVM for
non-protected guest. It will be later be called from MMU notifiers.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-15-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Introduce a new hypercall to remove the write permission from a
non-protected guest stage-2 mapping. This will be used for e.g. enabling
dirty logging.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-14-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Introduce a new hypercall allowing the host to relax the stage-2
permissions of mappings in a non-protected guest page-table. It will be
used later once we start allowing RO memslots and dirty logging.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-13-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In preparation for letting the host unmap pages from non-protected
guests, introduce a new hypercall implementing the host-unshare-guest
transition.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-12-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In preparation for handling guest stage-2 mappings at EL2, introduce a
new pKVM hypercall allowing to share pages with non-protected guests.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-11-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Rather than look-up the hyp vCPU on every run hypercall at EL2,
introduce a per-CPU 'loaded_hyp_vcpu' tracking variable which is updated
by a pair of load/put hypercalls called directly from
kvm_arch_vcpu_{load,put}() when pKVM is enabled.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-10-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In preparation for accessing pkvm_hyp_vm structures at EL2 in a context
where we can't always expect a vCPU to be loaded (e.g. MMU notifiers),
introduce get/put helpers to get temporary references to hyp VMs from
any context.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-9-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Turn kvm_pgtable_stage2_init() into a static inline function instead of
a macro. This will allow the usage of typeof() on it later on.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-8-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
kvm_pgtable_stage2_relax_perms currently assumes that it is being called
from a 'shared' walker, which will not be true once called from pKVM. To
allow for the re-use of that function, make the walk flags one of its
parameters.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-7-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
kvm_pgtable_stage2_mkyoung currently assumes that it is being called
from a 'shared' walker, which will not be true once called from pKVM.
To allow for the re-use of that function, make the walk flags one of
its parameters.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-6-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We currently store part of the page-tracking state in PTE software bits
for the host, guests and the hypervisor. This is sub-optimal when e.g.
sharing pages as this forces to break block mappings purely to support
this software tracking. This causes an unnecessarily fragmented stage-2
page-table for the host in particular when it shares pages with Secure,
which can lead to measurable regressions. Moreover, having this state
stored in the page-table forces us to do multiple costly walks on the
page transition path, hence causing overhead.
In order to work around these problems, move the host-side page-tracking
logic from SW bits in its stage-2 PTEs to the hypervisor's vmemmap.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-5-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We don't need 16 bits to store the hyp page order, and we'll need some
bits to store page ownership data soon, so let's reduce the order
member.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-4-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In order to prepare the way for storing page-tracking information in
pKVM's vmemmap, move the enum pkvm_page_state definition to
nvhe/memory.h.
No functional changes intended.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-3-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The 'concrete' (a.k.a non-meta) page states are currently encoded using
software bits in PTEs. For performance reasons, the abstract
pkvm_page_state enum uses the same bits to encode these states as that
makes conversions from and to PTEs easy.
In order to prepare the ground for moving the 'concrete' state storage
to the hyp vmemmap, re-arrange the enum to use bits 0 and 1 for this
purpose.
No functional changes intended.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-2-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Only yielding control of the debug registers for writes is a bit silly,
unless of course you're a fan of pointless traps. Give control of the
debug registers to the guest upon the first access, regardless of
direction.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-20-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
There is a nauseating amount of boilerplate for accessing the
breakpoint and watchpoint registers. Fold everything together into a
single set of accessors and select the right storage based on the sysreg
encoding.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-19-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Similar to other per-CPU profiling/debug features we handle, store the
number of breakpoints/watchpoints in kvm_host_data to avoid reading the
ID register 4 times on every guest entry/exit. And if you're in the
nested virt business that's quite a few avoidable exits to the L0
hypervisor.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-18-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Inject debug exceptions into vEL2 if MDCR_EL2.TDE is set.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-17-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM takes over the guest's software step state machine if the VMM is
debugging the guest, but it does the save/restore fiddling for every
guest entry.
Note that the only constraint on host usage of software step is that the
guest's configuration remains visible to userspace via the ONE_REG
ioctls. So, we can cut down on the amount of fiddling by doing this at
load/put instead.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-16-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Stealing MDSCR_EL1 in the guest's kvm_cpu_context for external debugging
is rather gross. Just add a field for this instead and let the context
switch code pick the correct one based on the debug owner.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-15-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM has picked up several hacks to cope with vcpu->arch.mdcr_el2 needing
to be prepared before vcpu_load(), which is when it gets programmed
into hardware on VHE.
Now that the flows for reprogramming MDCR_EL2 have been simplified, move
that computation to vcpu_load().
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-14-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM takes ownership of the debug regs if the guest enables the OS lock,
as it needs to use MDSCR_EL1 to mask debug exceptions. Just reload the
vCPU if the guest toggles the OS lock, relying on kvm_vcpu_load_debug()
to update the debug owner and get the right trap configuration in place.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-13-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Use the debug owner to determine if the debug regs are in use instead of
keeping around the DEBUG_DIRTY flag. Debug registers are now
saved/restored after the first trap, regardless of whether it was a read
or a write. This also shifts the point at which KVM becomes lazy to
vcpu_put() rather than the next exception taken from the guest.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-12-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Delete the remnants of debug_ptr now that debug registers are selected
based on the debug owner instead.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-11-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The debug tracepoints are a useless firehose of information that track
implementation detail rather than well-defined events. These are going
to be rather difficult to uphold now that the implementation is getting
redone, so throw them out instead of bending over backwards.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-10-oliver.upton@linux.dev
[maz: fixed compilation after trace-ectomy]
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Select the set of debug registers to use based on the owner rather than
relying on debug_ptr. Besides the code cleanup, this allows us to
eliminate a couple instances kern_hyp_va() as well.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-9-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
No particular reason other than it isn't nice to look at.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-8-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In preparation for tossing the debug_ptr mess, introduce an enumeration
to track the ownership of the debug registers while in the guest. Update
the owner at vcpu_load() based on whether the host needs to steal the
guest's debug context or if breakpoints/watchpoints are actively in use.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-7-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Expecting the callee to know when MDCR_EL2 needs to be written to
hardware asking for trouble. Do the deed from kvm_arm_setup_mdcr_el2()
instead.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-6-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The SME/SVE state tracking flags have no business in the vCPU. Move them
to kvm_host_data.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-5-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add flags to kvm_host_data to track if SPE/TRBE is present +
programmable on a per-CPU basis. Set the flags up at init rather than
vcpu_load() as the programmability of these buffers is unlikely to
change.
Reviewed-by: James Clark <james.clark@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-4-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM caches MDCR_EL2 on a per-CPU basis in order to preserve the
configuration of MDCR_EL2.HPMN while running a guest. This is a bit
gross, since we're relying on some baked configuration rather than the
hardware definition of implemented counters.
Discover the number of implemented counters by reading PMCR_EL0.N
instead. This works because:
- In VHE the kernel runs at EL2, and N always returns the number of
counters implemented in hardware
- In {n,h}VHE, the EL2 setup code programs MDCR_EL2.HPMN with the EL2
view of PMCR_EL0.N for the host
Lastly, avoid traps under nested virtualization by saving PMCR_EL0.N in
host data.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-3-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Nothing is using this macro, get rid of it.
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241219224116.3941496-2-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Sundry build and misc fixes
* tag 'arc-6.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: build: Try to guess GCC variant of cross compiler
ARC: bpf: Correct conditional check in 'check_jmp_32'
ARC: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices
ARC: build: Use __force to suppress per-CPU cmpxchg warnings
ARC: fix reference of dependency for PAE40 config
ARC: build: disallow invalid PAE40 + 4K page config
arc: rename aux.h to arc_aux.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Limit EFI zboot to GZIP and ZSTD before it comes in wider use
- Fix inconsistent error when looking up a non-existent file in
efivarfs with a name that does not adhere to the NAME-GUID format
- Drop some unused code
* tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/esrt: remove esre_attribute::store()
efivarfs: Fix error on non-existent file
efi/zboot: Limit compression options to GZIP and ZSTD
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"i2c host fixes: PNX used the wrong unit for timeouts, Nomadik was
missing a sentinel, and RIIC was missing rounding up"
* tag 'i2c-for-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: riic: Always round-up when calculating bus period
i2c: nomadik: Add missing sentinel to match table
i2c: pnx: Fix timeout in wait functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Make sure amd64_edac loads successfully on certain Zen4 memory
configurations
* tag 'edac_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Simplify ECC check on unified memory controllers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Disable the secure programming interface of the GIC500 chip in the
RK3399 SoC to fix interrupt priority assignment and even make a dead
machine boot again when the gic-v3 driver enables pseudo NMIs
- Correct the declaration of a percpu variable to fix several sparse
warnings
* tag 'irq_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Work around insecure GIC integrations
irqchip/gic: Correct declaration of *percpu_base pointer in union gic_base
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Prevent incorrect dequeueing of the deadline dlserver helper task and
fix its time accounting
- Properly track the CFS runqueue runnable stats
- Check the total number of all queued tasks in a sched fair's runqueue
hierarchy before deciding to stop the tick
- Fix the scheduling of the task that got woken last (NEXT_BUDDY) by
preventing those from being delayed
* tag 'sched_urgent_for_v6.13_rc3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/dlserver: Fix dlserver time accounting
sched/dlserver: Fix dlserver double enqueue
sched/eevdf: More PELT vs DELAYED_DEQUEUE
sched/fair: Fix sched_can_stop_tick() for fair tasks
sched/fair: Fix NEXT_BUDDY
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix confusion with implicitly-shifted MDCR_EL2 masks breaking
SPE/TRBE initialization
- Align nested page table walker with the intended memory attribute
combining rules of the architecture
- Prevent userspace from constraining the advertised ASID width,
avoiding horrors of guest TLBIs not matching the intended context
in hardware
- Don't leak references on LPIs when insertion into the translation
cache fails
RISC-V:
- Replace csr_write() with csr_set() for HVIEN PMU overflow bit
x86:
- Cache CPUID.0xD XSTATE offsets+sizes during module init
On Intel's Emerald Rapids CPUID costs hundreds of cycles and there
are a lot of leaves under 0xD. Getting rid of the CPUIDs during
nested VM-Enter and VM-Exit is planned for the next release, for
now just cache them: even on Skylake that is 40% faster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Cache CPUID.0xD XSTATE offsets+sizes during module init
RISC-V: KVM: Fix csr_write -> csr_set for HVIEN PMU overflow bit
KVM: arm64: vgic-its: Add error handling in vgic_its_cache_translation
KVM: arm64: Do not allow ID_AA64MMFR0_EL1.ASIDbits to be overridden
KVM: arm64: Fix S1/S2 combination when FWB==1 and S2 has Device memory type
arm64: Fix usage of new shifted MDCR_EL2 values
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Single one-line fix in the ufs driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Update compl_time_stamp_local_clock after completing a cqe
|
|
Pull bpf fixes from Daniel Borkmann:
- Fix a bug in the BPF verifier to track changes to packet data
property for global functions (Eduard Zingerman)
- Fix a theoretical BPF prog_array use-after-free in RCU handling of
__uprobe_perf_func (Jann Horn)
- Fix BPF tracing to have an explicit list of tracepoints and their
arguments which need to be annotated as PTR_MAYBE_NULL (Kumar
Kartikeya Dwivedi)
- Fix a logic bug in the bpf_remove_insns code where a potential error
would have been wrongly propagated (Anton Protopopov)
- Avoid deadlock scenarios caused by nested kprobe and fentry BPF
programs (Priya Bala Govindasamy)
- Fix a bug in BPF verifier which was missing a size check for
BTF-based context access (Kumar Kartikeya Dwivedi)
- Fix a crash found by syzbot through an invalid BPF prog_array access
in perf_event_detach_bpf_prog (Jiri Olsa)
- Fix several BPF sockmap bugs including a race causing a refcount
imbalance upon element replace (Michal Luczaj)
- Fix a use-after-free from mismatching BPF program/attachment RCU
flavors (Jann Horn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (23 commits)
bpf: Avoid deadlock caused by nested kprobe and fentry bpf programs
selftests/bpf: Add tests for raw_tp NULL args
bpf: Augment raw_tp arguments with PTR_MAYBE_NULL
bpf: Revert "bpf: Mark raw_tp arguments with PTR_MAYBE_NULL"
selftests/bpf: Add test for narrow ctx load for pointer args
bpf: Check size for BTF-based ctx access of pointer members
selftests/bpf: extend changes_pkt_data with cases w/o subprograms
bpf: fix null dereference when computing changes_pkt_data of prog w/o subprogs
bpf: Fix theoretical prog_array UAF in __uprobe_perf_func()
bpf: fix potential error return
selftests/bpf: validate that tail call invalidates packet pointers
bpf: consider that tail calls invalidate packet pointers
selftests/bpf: freplace tests for tracking of changes_packet_data
bpf: check changes_pkt_data property for extension programs
selftests/bpf: test for changing packet data from global functions
bpf: track changes_pkt_data property for global functions
bpf: refactor bpf_helper_changes_pkt_data to use helper number
bpf: add find_containing_subprog() utility function
bpf,perf: Fix invalid prog_array access in perf_event_detach_bpf_prog
bpf: Fix UAF via mismatching bpf_prog/attachment RCU flavors
...
|
|
BPF program types like kprobe and fentry can cause deadlocks in certain
situations. If a function takes a lock and one of these bpf programs is
hooked to some point in the function's critical section, and if the
bpf program tries to call the same function and take the same lock it will
lead to deadlock. These situations have been reported in the following
bug reports.
In percpu_freelist -
Link: https://lore.kernel.org/bpf/CAADnVQLAHwsa+2C6j9+UC6ScrDaN9Fjqv1WjB1pP9AzJLhKuLQ@mail.gmail.com/T/
Link: https://lore.kernel.org/bpf/CAPPBnEYm+9zduStsZaDnq93q1jPLqO-PiKX9jy0MuL8LCXmCrQ@mail.gmail.com/T/
In bpf_lru_list -
Link: https://lore.kernel.org/bpf/CAPPBnEajj+DMfiR_WRWU5=6A7KKULdB5Rob_NJopFLWF+i9gCA@mail.gmail.com/T/
Link: https://lore.kernel.org/bpf/CAPPBnEZQDVN6VqnQXvVqGoB+ukOtHGZ9b9U0OLJJYvRoSsMY_g@mail.gmail.com/T/
Link: https://lore.kernel.org/bpf/CAPPBnEaCB1rFAYU7Wf8UxqcqOWKmRPU1Nuzk3_oLk6qXR7LBOA@mail.gmail.com/T/
Similar bugs have been reported by syzbot.
In queue_stack_maps -
Link: https://lore.kernel.org/lkml/0000000000004c3fc90615f37756@google.com/
Link: https://lore.kernel.org/all/20240418230932.2689-1-hdanton@sina.com/T/
In lpm_trie -
Link: https://lore.kernel.org/linux-kernel/00000000000035168a061a47fa38@google.com/T/
In ringbuf -
Link: https://lore.kernel.org/bpf/20240313121345.2292-1-hdanton@sina.com/T/
Prevent kprobe and fentry bpf programs from attaching to these critical
sections by removing CC_FLAGS_FTRACE for percpu_freelist.o,
bpf_lru_list.o, queue_stack_maps.o, lpm_trie.o, ringbuf.o files.
The bugs reported by syzbot are due to tracepoint bpf programs being
called in the critical sections. This patch does not aim to fix deadlocks
caused by tracepoint programs. However, it does prevent deadlocks from
occurring in similar situations due to kprobe and fentry programs.
Signed-off-by: Priya Bala Govindasamy <pgovind2@uci.edu>
Link: https://lore.kernel.org/r/CAPPBnEZpjGnsuA26Mf9kYibSaGLm=oF6=12L21X1GEQdqjLnzQ@mail.gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
