summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-22dt-bindings: crypto: ti,sa2ul: Add new compatible for AM64Peter Ujfalusi
Add the AM64 version of sa2ul to the compatible list. [v_gupta@ti.com: Conditional dma-coherent requirement, clocks] Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vaibhav Gupta <v_gupta@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-22crypto: hisilicon - enable new error types for QMWeili Qian
QM adds 'qm_mailbox_timeout' and 'qm_flr_timeout' hardware error types on Kunpeng930. This patch enables the new error types and configures the error types as NFE. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-22crypto: hisilicon - add new error type for SECWeili Qian
Kunpeng930 SEC adds several new hardware error types. This patch enables the new error types and configures the error types as NFE. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-22crypto: hisilicon - support new error types for ZIPWeili Qian
Kunpeng930 ZIP adds 'zip_axi_poison_err' 'zip_sva_err' and 'QM_ACC_DO_TASK_TIMEOUT' hardware error types. This patch enables the error types and configures the error types as NFE. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-22crypto: hisilicon - dynamic configuration 'err_info'Weili Qian
'err_info' does not support dynamic configuration since it is const type. Therefore, in order to support new error type later, 'err_info' is changed to dynamic configuration. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-22crypto: doc - fix kernel-doc notation in chacha.c and af_alg.cRandy Dunlap
Fix function name in chacha.c kernel-doc comment to remove a warning. Convert af_alg.c to kernel-doc notation to eliminate many kernel-doc warnings. ../lib/crypto/chacha.c:77: warning: expecting prototype for chacha_block(). Prototype was for chacha_block_generic() instead chacha.c:104: warning: Excess function parameter 'out' description in 'hchacha_block_generic' af_alg.c:498: warning: Function parameter or member 'sk' not described in 'af_alg_alloc_tsgl' ../crypto/af_alg.c:539: warning: expecting prototype for aead_count_tsgl(). Prototype was for af_alg_count_tsgl() instead ../crypto/af_alg.c:596: warning: expecting prototype for aead_pull_tsgl(). Prototype was for af_alg_pull_tsgl() instead af_alg.c:663: warning: Function parameter or member 'areq' not described in 'af_alg_free_areq_sgls' af_alg.c:700: warning: Function parameter or member 'sk' not described in 'af_alg_wait_for_wmem' af_alg.c:700: warning: Function parameter or member 'flags' not described in 'af_alg_wait_for_wmem' af_alg.c:731: warning: Function parameter or member 'sk' not described in 'af_alg_wmem_wakeup' af_alg.c:757: warning: Function parameter or member 'sk' not described in 'af_alg_wait_for_data' af_alg.c:757: warning: Function parameter or member 'flags' not described in 'af_alg_wait_for_data' af_alg.c:757: warning: Function parameter or member 'min' not described in 'af_alg_wait_for_data' af_alg.c:796: warning: Function parameter or member 'sk' not described in 'af_alg_data_wakeup' af_alg.c:832: warning: Function parameter or member 'sock' not described in 'af_alg_sendmsg' af_alg.c:832: warning: Function parameter or member 'msg' not described in 'af_alg_sendmsg' af_alg.c:832: warning: Function parameter or member 'size' not described in 'af_alg_sendmsg' af_alg.c:832: warning: Function parameter or member 'ivsize' not described in 'af_alg_sendmsg' af_alg.c:985: warning: Function parameter or member 'sock' not described in 'af_alg_sendpage' af_alg.c:985: warning: Function parameter or member 'page' not described in 'af_alg_sendpage' af_alg.c:985: warning: Function parameter or member 'offset' not described in 'af_alg_sendpage' af_alg.c:985: warning: Function parameter or member 'size' not described in 'af_alg_sendpage' af_alg.c:985: warning: Function parameter or member 'flags' not described in 'af_alg_sendpage' af_alg.c:1040: warning: Function parameter or member 'areq' not described in 'af_alg_free_resources' af_alg.c:1059: warning: Function parameter or member '_req' not described in 'af_alg_async_cb' af_alg.c:1059: warning: Function parameter or member 'err' not described in 'af_alg_async_cb' af_alg.c:1083: warning: Function parameter or member 'file' not described in 'af_alg_poll' af_alg.c:1083: warning: Function parameter or member 'sock' not described in 'af_alg_poll' af_alg.c:1083: warning: Function parameter or member 'wait' not described in 'af_alg_poll' af_alg.c:1114: warning: Function parameter or member 'sk' not described in 'af_alg_alloc_areq' af_alg.c:1114: warning: Function parameter or member 'areqlen' not described in 'af_alg_alloc_areq' af_alg.c:1146: warning: Function parameter or member 'sk' not described in 'af_alg_get_rsgl' af_alg.c:1146: warning: Function parameter or member 'msg' not described in 'af_alg_get_rsgl' af_alg.c:1146: warning: Function parameter or member 'flags' not described in 'af_alg_get_rsgl' af_alg.c:1146: warning: Function parameter or member 'areq' not described in 'af_alg_get_rsgl' af_alg.c:1146: warning: Function parameter or member 'maxsize' not described in 'af_alg_get_rsgl' af_alg.c:1146: warning: Function parameter or member 'outlen' not described in 'af_alg_get_rsgl' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-22devm-helpers: Fix devm_delayed_work_autocancel() kerneldocMatti Vaittinen
The kerneldoc for devm_delayed_work_autocancel() contains invalid parameter description. Fix the parameter description. And while at it - make it more obvous that this function operates on delayed_work. That helps differentiating with resource-managed INIT_WORK description (which should follow in near future) Fixes: 0341ce544394 ("workqueue: Add resource managed version of delayed work init") Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/db3a8b4b8899fdf109a0cc760807de12d3b4f09b.1619028482.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22pinctrl: core: Show pin numbers for the controllers with base = 0Andy Shevchenko
The commit f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file") enabled GPIO pin number and label in debugfs for pin controller. However, it limited that feature to the chips where base is positive number. This, in particular, excluded chips where base is 0 for the historical or backward compatibility reasons. Refactor the code to include the latter as well. Fixes: f1b206cf7c57 ("pinctrl: core: print gpio in pins debugfs file") Cc: Drew Fustini <drew@beagleboard.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Drew Fustini <drew@beagleboard.org> Reviewed-by: Drew Fustini <drew@beagleboard.org> Link: https://lore.kernel.org/r/20210415130356.15885-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-21KEYS: trusted: fix TPM trusted keys for generic frameworkJames Bottomley
The generic framework patch broke the current TPM trusted keys because it doesn't correctly remove the values consumed by the generic parser before passing them on to the implementation specific parser. Fix this by having the generic parser return the string minus the consumed tokens. Additionally, there may be no tokens left for the implementation specific parser, so make it handle the NULL case correctly and finally fix a TPM 1.2 specific check for no keyhandle. Fixes: 5d0682be3189 ("KEYS: trusted: Add generic trusted keys framework") Tested-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2021-04-21KEYS: trusted: Fix TPM reservation for seal/unsealJames Bottomley
The original patch 8c657a0590de ("KEYS: trusted: Reserve TPM for seal and unseal operations") was correct on the mailing list: https://lore.kernel.org/linux-integrity/20210128235621.127925-4-jarkko@kernel.org/ But somehow got rebased so that the tpm_try_get_ops() in tpm2_seal_trusted() got lost. This causes an imbalanced put of the TPM ops and causes oopses on TIS based hardware. This fix puts back the lost tpm_try_get_ops() Fixes: 8c657a0590de ("KEYS: trusted: Reserve TPM for seal and unseal operations") Reported-by: Mimi Zohar <zohar@linux.ibm.com> Acked-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2021-04-21platform/x86: intel_pmc_core: Uninitialized data in ↵Dan Carpenter
pmc_core_lpm_latch_mode_write() The simple_write_to_buffer() can return success if even a single byte is copied from user space. In this case it can result in using uninitalized data if the buf[] array is not fully initialized. Really we should only succeed if the whole buffer is copied. Just using copy_from_user() is simpler and more appropriate. Fixes: 8074a79fad2e ("platform/x86: intel_pmc_core: Add option to set/clear LPM mode") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YIBCf+G9Ef8wrGJw@mwanda Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-21Merge tag 'mmc-v5.12-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fix from Ulf Hansson: "Replace WARN_ONCE with dev_warn_once for non-optimal sg-alignment in the meson-gx host driver" * tag 'mmc-v5.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: meson-gx: replace WARN_ONCE with dev_warn_once about scatterlist size alignment in block mode
2021-04-21block: return -EBUSY when there are open partitions in blkdev_reread_partChristoph Hellwig
The switch to go through blkdev_get_by_dev means we now ignore the return value from bdev_disk_changed in __blkdev_get. Add a manual check to restore the old semantics. Fixes: 4601b4b130de ("block: reopen the device in blkdev_reread_part") Reported-by: Karel Zak <kzak@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210421160502.447418-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-21drm/amdgpu: fix GCR_GENERAL_CNTL offset for dimgrey_cavefishJiansong Chen
dimgrey_cavefish has similar gc_10_3 ip with sienna_cichlid, so follow its registers offset setting. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-04-21amd/display: allow non-linear multi-planar formatsSimon Ser
Accept non-linear buffers which use a multi-planar format, as long as they don't use DCC. Tested on GFX9 with NV12. Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-04-21drm/amd/display: Update modifier list for gfx10_3Qingqing Zhuo
[Why] Current list supports modifiers that have DCC_MAX_COMPRESSED_BLOCK set to AMD_FMT_MOD_DCC_BLOCK_128B, while AMD_FMT_MOD_DCC_BLOCK_64B is used instead by userspace. [How] Replace AMD_FMT_MOD_DCC_BLOCK_128B with AMD_FMT_MOD_DCC_BLOCK_64B for modifiers with DCC supported. Fixes: faa37f54ce0462 ("drm/amd/display: Expose modifiers") Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-04-21drm/amdgpu: reserve fence slot to update page tablePhilip Yang
Forgot to reserve a fence slot to use sdma to update page table, cause below kernel BUG backtrace to handle vm retry fault while application is exiting. [ 133.048143] kernel BUG at /home/yangp/git/compute_staging/kernel/drivers/dma-buf/dma-resv.c:281! [ 133.048487] Workqueue: events amdgpu_irq_handle_ih1 [amdgpu] [ 133.048506] RIP: 0010:dma_resv_add_shared_fence+0x204/0x280 [ 133.048672] amdgpu_vm_sdma_commit+0x134/0x220 [amdgpu] [ 133.048788] amdgpu_vm_bo_update_range+0x220/0x250 [amdgpu] [ 133.048905] amdgpu_vm_handle_fault+0x202/0x370 [amdgpu] [ 133.049031] gmc_v9_0_process_interrupt+0x1ab/0x310 [amdgpu] [ 133.049165] ? kgd2kfd_interrupt+0x9a/0x180 [amdgpu] [ 133.049289] ? amdgpu_irq_dispatch+0xb6/0x240 [amdgpu] [ 133.049408] amdgpu_irq_dispatch+0xb6/0x240 [amdgpu] [ 133.049534] amdgpu_ih_process+0x9b/0x1c0 [amdgpu] [ 133.049657] amdgpu_irq_handle_ih1+0x21/0x60 [amdgpu] [ 133.049669] process_one_work+0x29f/0x640 [ 133.049678] worker_thread+0x39/0x3f0 [ 133.049685] ? process_one_work+0x640/0x640 Signed-off-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.11.x
2021-04-21gpio: omap: Save and restore sysconfigTony Lindgren
As we are using cpu_pm to save and restore context, we must also save and restore the GPIO sysconfig register. This is needed because we are not calling PM runtime functions at all with cpu_pm. We need to save the sysconfig on idle as it's value can get reconfigured by PM runtime and can be different from the init time value. Device specific flags like "ti,no-idle-on-init" can affect the init value. Fixes: b764a5863fd8 ("gpio: omap: Remove custom PM calls and use cpu_pm instead") Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Adam Ford <aford173@gmail.com> Cc: Andreas Kemnade <andreas@kemnade.info> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-04-21platform/x86: intel_pmc_core: add ACPI dependencyArnd Bergmann
The driver now fails to build without ACPI: drivers/platform/x86/intel_pmc_core.c: In function 'pmc_core_get_tgl_lpm_reqs': drivers/platform/x86/intel_pmc_core.c:617:41: error: invalid use of undefined type 'struct acpi_device' 617 | out_obj = acpi_evaluate_dsm(adev->handle, &s0ix_dsm_guid, 0, This could probably be made optional, but it won't be used without ACPI in practice, so just add a Kconfig dependency. Fixes: 428131364f00 ("platform/x86: intel_pmc_core: Get LPM requirements for Tiger Lake") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210421134957.3329062-1-arnd@kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-21perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3Kan Liang
There may be a kernel panic on the Haswell server and the Broadwell server, if the snbep_pci2phy_map_init() return error. The uncore_extra_pci_dev[HSWEP_PCI_PCU_3] is used in the cpu_init() to detect the existence of the SBOX, which is a MSR type of PMON unit. The uncore_extra_pci_dev is allocated in the uncore_pci_init(). If the snbep_pci2phy_map_init() returns error, perf doesn't initialize the PCI type of the PMON units, so the uncore_extra_pci_dev will not be allocated. But perf may continue initializing the MSR type of PMON units. A null dereference kernel panic will be triggered. The sockets in a Haswell server or a Broadwell server are identical. Only need to detect the existence of the SBOX once. Current perf probes all available PCU devices and stores them into the uncore_extra_pci_dev. It's unnecessary. Use the pci_get_device() to replace the uncore_extra_pci_dev. Only detect the existence of the SBOX on the first available PCU device once. Factor out hswep_has_limit_sbox(), since the Haswell server and the Broadwell server uses the same way to detect the existence of the SBOX. Add some macros to replace the magic number. Fixes: 5306c31c5733 ("perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes") Reported-by: Steve Wahl <steve.wahl@hpe.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Steve Wahl <steve.wahl@hpe.com> Link: https://lkml.kernel.org/r/1618521764-100923-1-git-send-email-kan.liang@linux.intel.com
2021-04-21drivers: hv: Create a consistent pattern for checking Hyper-V hypercall statusJoseph Salisbury
There is not a consistent pattern for checking Hyper-V hypercall status. Existing code uses a number of variants. The variants work, but a consistent pattern would improve the readability of the code, and be more conformant to what the Hyper-V TLFS says about hypercall status. Implemented new helper functions hv_result(), hv_result_success(), and hv_repcomp(). Changed the places where hv_do_hypercall() and related variants are used to use the helper functions. Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1618620183-9967-2-git-send-email-joseph.salisbury@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-04-21x86/hyperv: Move hv_do_rep_hypercall to asm-genericJoseph Salisbury
This patch makes no functional changes. It simply moves hv_do_rep_hypercall() out of arch/x86/include/asm/mshyperv.h and into asm-generic/mshyperv.h hv_do_rep_hypercall() is architecture independent, so it makes sense that it should be in the architecture independent mshyperv.h, not in the x86-specific mshyperv.h. This is done in preperation for a follow up patch which creates a consistent pattern for checking Hyper-V hypercall status. Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1618620183-9967-1-git-send-email-joseph.salisbury@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-04-20Merge tag 'trace-v5.12-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Fix tp_printk command line and trace events Masami added a wrapper to be able to unhash trace event pointers as they are only read by root anyway, and they can also be extracted by the raw trace data buffers. But this wrapper utilized the iterator to have a temporary buffer to manipulate the text with. tp_printk is a kernel command line option that will send the trace output of a trace event to the console on boot up (useful when the system crashes before finishing the boot). But the code used the same wrapper that Masami added, and its iterator did not have a buffer, and this caused the system to crash. Have the wrapper just print the trace event normally if the iterator has no temporary buffer" * tag 'trace-v5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix checking event hash pointer logic when tp_printk is enabled
2021-04-20capabilities: require CAP_SETFCAP to map uid 0Serge E. Hallyn
cap_setfcap is required to create file capabilities. Since commit 8db6c34f1dbc ("Introduce v3 namespaced file capabilities"), a process running as uid 0 but without cap_setfcap is able to work around this as follows: unshare a new user namespace which maps parent uid 0 into the child namespace. While this task will not have new capabilities against the parent namespace, there is a loophole due to the way namespaced file capabilities are represented as xattrs. File capabilities valid in userns 1 are distinguished from file capabilities valid in userns 2 by the kuid which underlies uid 0. Therefore the restricted root process can unshare a new self-mapping namespace, add a namespaced file capability onto a file, then use that file capability in the parent namespace. To prevent that, do not allow mapping parent uid 0 if the process which opened the uid_map file does not have CAP_SETFCAP, which is the capability for setting file capabilities. As a further wrinkle: a task can unshare its user namespace, then open its uid_map file itself, and map (only) its own uid. In this case we do not have the credential from before unshare, which was potentially more restricted. So, when creating a user namespace, we record whether the creator had CAP_SETFCAP. Then we can use that during map_write(). With this patch: 1. Unprivileged user can still unshare -Ur ubuntu@caps:~$ unshare -Ur root@caps:~# logout 2. Root user can still unshare -Ur ubuntu@caps:~$ sudo bash root@caps:/home/ubuntu# unshare -Ur root@caps:/home/ubuntu# logout 3. Root user without CAP_SETFCAP cannot unshare -Ur: root@caps:/home/ubuntu# /sbin/capsh --drop=cap_setfcap -- root@caps:/home/ubuntu# /sbin/setcap cap_setfcap=p /sbin/setcap unable to set CAP_SETFCAP effective capability: Operation not permitted root@caps:/home/ubuntu# unshare -Ur unshare: write failed /proc/self/uid_map: Operation not permitted Note: an alternative solution would be to allow uid 0 mappings by processes without CAP_SETFCAP, but to prevent such a namespace from writing any file capabilities. This approach can be seen at [1]. Background history: commit 95ebabde382 ("capabilities: Don't allow writing ambiguous v3 file capabilities") tried to fix the issue by preventing v3 fscaps to be written to disk when the root uid would map to the same uid in nested user namespaces. This led to regressions for various workloads. For example, see [2]. Ultimately this is a valid use-case we have to support meaning we had to revert this change in 3b0c2d3eaa83 ("Revert 95ebabde382c ("capabilities: Don't allow writing ambiguous v3 file capabilities")"). Link: https://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux.git/log/?h=2021-04-15/setfcap-nsfscaps-v4 [1] Link: https://github.com/containers/buildah/issues/3071 [2] Signed-off-by: Serge Hallyn <serge@hallyn.com> Reviewed-by: Andrew G. Morgan <morgan@kernel.org> Tested-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Tested-by: Giuseppe Scrivano <gscrivan@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-20video: hyperv_fb: Add ratelimit on error messageMichael Kelley
Due to a full ring buffer, the driver may be unable to send updates to the Hyper-V host. But outputing the error message can make the problem worse because console output is also typically written to the frame buffer. As a result, in some circumstances the error message is output continuously. Break the cycle by rate limiting the error message. Also output the error code for additional diagnosability. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1618933459-10585-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-04-20Drivers: hv: vmbus: Increase wait time for VMbus unloadMichael Kelley
When running in Azure, disks may be connected to a Linux VM with read/write caching enabled. If a VM panics and issues a VMbus UNLOAD request to Hyper-V, the response is delayed until all dirty data in the disk cache is flushed. In extreme cases, this flushing can take 10's of seconds, depending on the disk speed and the amount of dirty data. If kdump is configured for the VM, the current 10 second timeout in vmbus_wait_for_unload() may be exceeded, and the UNLOAD complete message may arrive well after the kdump kernel is already running, causing problems. Note that no problem occurs if kdump is not enabled because Hyper-V waits for the cache flush before doing a reboot through the BIOS/UEFI code. Fix this problem by increasing the timeout in vmbus_wait_for_unload() to 100 seconds. Also output periodic messages so that if anyone is watching the serial console, they won't think the VM is completely hung. Fixes: 911e1987efc8 ("Drivers: hv: vmbus: Add timeout to vmbus_wait_for_unload") Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/1618894089-126662-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-04-20Drivers: hv: vmbus: Initialize unload_event staticallyAndrea Parri (Microsoft)
If a malicious or compromised Hyper-V sends a spurious message of type CHANNELMSG_UNLOAD_RESPONSE, the function vmbus_unload_response() will call complete() on an uninitialized event, and cause an oops. Reported-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20210420014350.2002-1-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-04-20perf data: Fix error return code in perf_data__create_dir()Zhen Lei
Although 'ret' has been initialized to -1, but it will be reassigned by the "ret = open(...)" statement in the for loop. So that, the value of 'ret' is unknown when asprintf() failed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210415083417.3740-1-thunder.leizhen@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-20x86/crash: Fix crash_setup_memmap_entries() out-of-bounds accessMike Galbraith
Commit in Fixes: added support for kexec-ing a kernel on panic using a new system call. As part of it, it does prepare a memory map for the new kernel. However, while doing so, it wrongly accesses memory it has not allocated: it accesses the first element of the cmem->ranges[] array in memmap_exclude_ranges() but it has not allocated the memory for it in crash_setup_memmap_entries(). As KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in crash_setup_memmap_entries+0x17e/0x3a0 Write of size 8 at addr ffffc90000426008 by task kexec/1187 (gdb) list *crash_setup_memmap_entries+0x17e 0xffffffff8107cafe is in crash_setup_memmap_entries (arch/x86/kernel/crash.c:322). 317 unsigned long long mend) 318 { 319 unsigned long start, end; 320 321 cmem->ranges[0].start = mstart; 322 cmem->ranges[0].end = mend; 323 cmem->nr_ranges = 1; 324 325 /* Exclude elf header region */ 326 start = image->arch.elf_load_addr; (gdb) Make sure the ranges array becomes a single element allocated. [ bp: Write a proper commit message. ] Fixes: dd5f726076cc ("kexec: support for kexec on panic using new system call") Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Dave Young <dyoung@redhat.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/725fa3dc1da2737f0f6188a1a9701bead257ea9d.camel@gmx.de
2021-04-20platform/surface: aggregator: fix a bit testDan Carpenter
The "funcs" variable is a u64. If "func" is more than 31 then the BIT() shift will wrap instead of testing the high bits. Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/YH6UUhJhGk3mk13b@mwanda Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-20platform/x86: intel_pmc_core: Fix "unsigned 'ret' is never less than zero" ↵Hans de Goede
smatch warning Change the type of ret form a size_t to a ssize_t, matching the prototype of simple_write_to_buffer(), fixing this warning reported by smatch: drivers/platform/x86/intel_pmc_core.c:1369 pmc_core_lpm_latch_mode_write() warn: unsigned 'ret' is never less than zero. Fixes: 8074a79fad2e ("platform/x86: intel_pmc_core: Add option to set/clear LPM mode") Cc: David E. Box <david.e.box@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210419143109.30612-1-hdegoede@redhat.com
2021-04-20tracing: Fix checking event hash pointer logic when tp_printk is enabledSteven Rostedt (VMware)
Pointers in events that are printed are unhashed if the flags allow it, and the logic to do so is called before processing the event output from the raw ring buffer. In most cases, this is done when a user reads one of the trace files. But if tp_printk is added on the kernel command line, this logic is done for trace events when they are triggered, and their output goes out via printk. The unhash logic (and even the validation of the output) did not support the tp_printk output, and would crash. Link: https://lore.kernel.org/linux-tegra/9835d9f1-8d3a-3440-c53f-516c2606ad07@nvidia.com/ Fixes: efbbdaa22bb7 ("tracing: Show real address for trace event arguments") Reported-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-04-20Merge tag 'gvt-fixes-2021-04-20' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi
drm-intel-fixes gvt-fixes-2021-04-20 - Fix cmd parser regression on BDW (Zhenyu) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210420023312.GL1551@zhen-hp.sh.intel.com
2021-04-20x86/platform/uv: Remove dead !CONFIG_KEXEC_CORE codeIngo Molnar
The !CONFIG_KEXEC_CORE code in arch/x86/platform/uv/uv_nmi.c was unused, untested and didn't even build for 7 years. Since we fixed this by requiring X86_UV to depend on CONFIG_KEXEC_CORE, remove the (now) dead code. Also move the uv_nmi_kexec_failed definition back up to where the other file-scope global variables are defined. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Mike Travis <travis@sgi.com> Cc: linux-kernel@vger.kernel.org
2021-04-20x86/platform/uv: Fix !KEXEC build failureIngo Molnar
When KEXEC is disabled, the UV build fails: arch/x86/platform/uv/uv_nmi.c:875:14: error: ‘uv_nmi_kexec_failed’ undeclared (first use in this function) Since uv_nmi_kexec_failed is only defined in the KEXEC_CORE #ifdef branch, this code cannot ever have been build tested: if (main) pr_err("UV: NMI kdump: KEXEC not supported in this kernel\n"); atomic_set(&uv_nmi_kexec_failed, 1); Nor is this use possible in uv_handle_nmi(): atomic_set(&uv_nmi_kexec_failed, 0); These bugs were introduced in this commit: d0a9964e9873: ("x86/platform/uv: Implement simple dump failover if kdump fails") Which added the uv_nmi_kexec_failed assignments to !KEXEC code, while making the definition KEXEC-only - apparently without testing the !KEXEC case. Instead of complicating the #ifdef maze, simplify the code by requiring X86_UV to depend on KEXEC_CORE. This pattern is present in other architectures as well. ( We'll remove the untested, 7 years old !KEXEC complications from the file in a separate commit. ) Fixes: d0a9964e9873: ("x86/platform/uv: Implement simple dump failover if kdump fails") Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Mike Travis <travis@sgi.com> Cc: linux-kernel@vger.kernel.org
2021-04-19Revert "gcov: clang: fix clang-11+ build"Linus Torvalds
This reverts commit 04c53de57cb6435738961dace8b1b71d3ecd3c39. Nathan Chancellor points out that it should not have been merged into mainline by itself. It was a fix for "gcov: use kvmalloc()", which is still in -mm/-next. Merging it alone has broken the build. Link: https://github.com/ClangBuiltLinux/continuous-integration2/runs/2384465683?check_suite_focus=true Reported-by: Nathan Chancellor <nathan@kernel.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-19drm/i915: Fix modesetting in case of unexpected AUX timeoutsImre Deak
In case AUX failures happen unexpectedly during a modeset, the driver should still complete the modeset. In particular the driver should perform the link training sequence steps even in case of an AUX failure, as this sequence also includes port initialization steps. Not doing that can leave the port/pipe in a broken state and lead for instance to a flip done timeout. Fix this by continuing with link training (in a no-LTTPR mode) if the DPRX DPCD readout failed for some reason at the beginning of link training. After a successful connector detection we already have the DPCD read out and cached, so the failed repeated read for it should not cause a problem. Note that a partial AUX read could in theory partly overwrite the cached DPCD (and return error) but this overwrite should not happen if the returned values are corrupted (due to a timeout or some other IO error). Kudos to Ville to root cause the problem. Fixes: 7dffbdedb96a ("drm/i915: Disable LTTPR support when the DPCD rev < 1.4") References: https://gitlab.freedesktop.org/drm/intel/-/issues/3308 Cc: stable@vger.kernel.org # 5.11 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412232413.2755054-1-imre.deak@intel.com (cherry picked from commit e42e7e585984b85b0fb9dd1fefc85ee4800ca629) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [adjusted Fixes: tag]
2021-04-19preempt/dynamic: Fix typo in macro conditional statementZhouyi Zhou
Commit 40607ee97e4e ("preempt/dynamic: Provide irqentry_exit_cond_resched() static call") tried to provide irqentry_exit_cond_resched() static call in irqentry_exit, but has a typo in macro conditional statement. Fixes: 40607ee97e4e ("preempt/dynamic: Provide irqentry_exit_cond_resched() static call") Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210410073523.5493-1-zhouzhouyi@gmail.com
2021-04-19x86/build: Disable HIGHMEM64G selection for M486SXMaciej W. Rozycki
Fix a regression caused by making the 486SX separately selectable in Kconfig, for which the HIGHMEM64G setting has not been updated and therefore has become exposed as a user-selectable option for the M486SX configuration setting unlike with original M486 and all the other settings that choose non-PAE-enabled processors: High Memory Support > 1. off (NOHIGHMEM) 2. 4GB (HIGHMEM4G) 3. 64GB (HIGHMEM64G) choice[1-3?]: With the fix in place the setting is now correctly removed: High Memory Support > 1. off (NOHIGHMEM) 2. 4GB (HIGHMEM4G) choice[1-2?]: [ bp: Massage commit message. ] Fixes: 87d6021b8143 ("x86/math-emu: Limit MATH_EMULATION to 486SX compatibles") Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org # v5.5+ Link: https://lkml.kernel.org/r/alpine.DEB.2.21.2104141221340.44318@angie.orcam.me.uk
2021-04-19m68k: sun3x: Remove unneeded semicolonWan Jiabing
Fix the following coccicheck warning: ./arch/m68k/include/asm/sun3xflop.h:109:2-3: Unneeded semicolon Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20210415031450.23379-1-wanjiabing@vivo.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-04-19platform/x86: touchscreen_dmi: Add info for the Teclast Tbook 11 tabletHans de Goede
Add touchscreen info for the Teclast Tbook 11 tablet. This includes info for getting the firmware directly from the UEFI, so that the user does not need to manually install the firmware in /lib/firmware/silead. This change will make the touchscreen on these devices work OOTB, without requiring any manual setup. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210417173105.4134-1-hdegoede@redhat.com
2021-04-19platform/x86: intel_pmc_core: Add support for Alder Lake PCH-PDavid E. Box
Alder PCH-P is based on Tiger Lake PCH. Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20210417031252.3020837-10-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-19platform/x86: intel_pmc_core: Add LTR registers for Tiger LakeGayatri Kammela
Just like Ice Lake, Tiger Lake uses Cannon Lake's LTR information and supports a few additional registers. Hence add the LTR registers specific to Tiger Lake to the cnp_ltr_show_map[]. Also adjust the number of LTR IPs for Tiger Lake to the correct amount. Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20210417031252.3020837-9-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-19platform/x86: intel_pmc_core: Add option to set/clear LPM modeDavid E. Box
By default the Low Power Mode (LPM or sub-state) status registers will latch condition status on every entry into Package C10. This is configurable in the PMC to allow latching on any achievable sub-state. Add a debugfs file to support this. Also add the option to clear the status registers to 0. Clearing the status registers before testing removes ambiguity around when the current values were set. The new file, latch_lpm_mode, looks like this: [c10] S0i2.0 S0i3.0 S0i2.1 S0i3.1 S0i3.2 clear Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210417031252.3020837-8-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-19platform/x86: intel_pmc_core: Add requirements file to debugfsGayatri Kammela
Add the debugfs file, substate_requirements, to view the low power mode (LPM) requirements for each enabled mode alongside the last latched status of the condition. After this patch, the new file will look like this: Element | S0i2.0 | S0i3.0 | S0i2.1 | S0i3.1 | S0i3.2 | Status | USB2PLL_OFF_STS | Required | Required | Required | Required | Required | | PCIe/USB3.1_Gen2PLL_OFF_STS | Required | Required | Required | Required | Required | | PCIe_Gen3PLL_OFF_STS | Required | Required | Required | Required | Required | Yes | OPIOPLL_OFF_STS | Required | Required | Required | Required | Required | Yes | OCPLL_OFF_STS | Required | Required | Required | Required | Required | Yes | MainPLL_OFF_STS | | Required | | Required | Required | | Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Co-developed-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210417031252.3020837-7-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-19platform/x86: intel_pmc_core: Get LPM requirements for Tiger LakeGayatri Kammela
Platforms that support low power modes (LPM) such as Tiger Lake maintain requirements for each sub-state that a readable in the PMC. However, unlike LPM status registers, requirement registers are not memory mapped but are available from an ACPI _DSM. Collect the requirements for Tiger Lake using the _DSM method and store in a buffer. Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Co-developed-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210417031252.3020837-6-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-19platform/x86: intel_pmc_core: Show LPM residency in microsecondsGayatri Kammela
Modify the low power mode (LPM or sub-state) residency counters to display in microseconds just like the slp_s0_residency counter. The granularity of the counter is approximately 30.5us per tick. Double this value then divide by two to maintain accuracy. Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20210417031252.3020837-5-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-19platform/x86: intel_pmc_core: Handle sub-states genericallyGayatri Kammela
The current implementation of pmc_core_substate_res_show() is written specifically for Tiger Lake. However, new platform will also have sub-states and may support different modes. Therefore rewrite the code to handle sub-states generically. Obtain the number and type of enabled states form the PMC. Use the Low Power Mode (LPM) priority register to store the states in order from shallowest to deepest for displays. Add a for_each macro to simplify this. While changing the sub-state display it makes sense to show only the "enabled" sub-states instead of showing all possible ones. After this patch, the debugfs file looks like this: Substate Residency S0i2.0 0 S0i3.0 0 S0i2.1 9329279 S0i3.1 0 S0i3.2 0 Suggested-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20210417031252.3020837-4-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-19platform/x86: intel_pmc_core: Remove global struct pmc_devDavid E. Box
The intel_pmc_core driver did not always bind to a device which meant it lacked a struct device that could be used to maintain driver data. So a global instance of struct pmc_dev was used for this purpose and functions accessed this directly. Since the driver now binds to an ACPI device, remove the global pmc_dev in favor of one that is allocated during probe. Modify users of the global to obtain the object by argument instead. Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20210417031252.3020837-3-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-04-19platform/x86: intel_pmc_core: Don't use global pmcdev in quirksDavid E. Box
The DMI callbacks, used for quirks, currently access the PMC by getting the address a global pmc_dev struct. Instead, have the callbacks set a global quirk specific variable. In probe, after calling dmi_check_system(), pass pmc_dev to a function that will handle each quirk if its variable condition is met. This allows removing the global pmc_dev later. Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20210417031252.3020837-2-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-11 03:45:17 +0000