summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-27brcmfmac: introduce brcmf_fw_alloc_request() functionArend Van Spriel
The function brcmf_fw_alloc_request() takes a list of required files and allocated the struct brcmf_fw_request instance accordingly. The request can be modified by the caller before being passed to the brcmf_fw_request_firmwares() function. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: pass struct in brcmf_fw_get_firmwares()Arend Van Spriel
Make the function brcmf_fw_get_firmwares() a bit more easy to extend using a structure to pass the request parameters. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: derive firmware filenames from basename mappingArend Van Spriel
Instead of defining individual filenames for firmware and nvram use a basename and derive the names from that. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: use wiphy debugfs dir entryArend Van Spriel
The driver used to create a brcmfmac dir entry at the top level debugfs mount point. This moves the debugfs entries into the wiphy debugfs dir entry. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: allocate struct brcmf_pub instance using wiphy_new()Arend Van Spriel
Rework the driver so the wiphy instance holds the main driver information in its private buffer. Previously it held struct brcmf_cfg80211_info instance so a bit of reorg was needed. This was done so that the wiphy name or its parent device can be shown in debug output. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: use brcmf_chip_name() for consistencyArend Van Spriel
When logging the chip id/revision information make use of brcmf_chip_name() so it is always the same. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: use brcmf_chip_name() to store name in revinfoArend Van Spriel
The chip id can either be four or five digits. For the chip name either the hexadecimal value needs to be taken (four digits) or the decimal value (five digits). The function brcmf_chip_name() does this conversion so use it to store the name in driver revision info. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27brcmfmac: do not convert linux error to firmware error stringArend Van Spriel
In case of a linux error brcmf_fil_cmd_data() blurts an error message in which the error code is translated to an error string. However, it maps it to a firmware error string which should not happen. Simply print only the numeric error code and be done with it. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: rtl8821ae: fix spelling mistake: "Aboslute" -> "Absolute"Colin Ian King
Trivial fix to spelling mistake in RT_TRACE message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net? Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: correct commentKevin Lo
Correct comment. Set bit 3 and bit 4 of 0x0005 register (REG_APS_FSMCO + 1) to 0 which means disable WL suspend, not enable WL suspend. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add new but dummy definitions introduced by 8822bPing-Ke Shih
btcoex support multiple platforms, but this drivers doesn't support full functions yet, so this commit adds dummy definitions. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: new definitions introduced by 8822bePing-Ke Shih
New constant and variables definitions are used by btcoex of 8822b, so this commit add them. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: add assoc type v2 to connection notifyPing-Ke Shih
In connection notify v1, btcoex only need to know start/end association, and it will discriminate 2G and 5G band in v2. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add pre- and post- normal LPS functionPing-Ke Shih
Normal LPS is decomposed into pre- and post- parts, so we can issue H2C with TDMA parameters in the "critical section" that dirver can't change LPS state at the moment. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add interaction with phydmPing-Ke Shih
Get phydm's counter and version from the module phydm that is not submitted so we implement dummy functions. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add rate table for the use of btcoexPing-Ke Shih
The btcoex use the rate to rsolve IOT issue that some APs reduce TX rate quickly, so it uses the RX rate as a clue to decide TDMA. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger#lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Get status of multichannel concurrencePing-Ke Shih
btcoex does different decision according to MCC or SCC status, but driver is still SCC currently. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add customer_id to do special deal to oem vendorPing-Ke Shih
Add customer_id field in structure, and then this is a clue to implement the behavior defined by vendor LENOVO_CHINA. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add enum DM_INFO for btcoex to query dm's countersPing-Ke Shih
btcoex uses dm's counters to check the environment is noisy or not. If it is clean, btcoex set more time slots to WiFi so that it can transmit as soon as possible. That will save time, and BT will have more time slots after WiFi traffic is complete. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: remove redundant statement found by static checkerPing-Ke Shih
smatch reports "rtl_is_special_data() warn: inconsistent indenting", but it is an obvious redundant statement so remove it. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: Add modifier static to functions reported by sparsePing-Ke Shih
sparse reports some functions were not declared, so add 'static' as modifier. Remove an unused function btc8821a1ant_is_wifi_status_changed() exposed due to 'static'. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rsi: fix kernel panic observed on 64bit machineAmitkumar Karwar
Following kernel panic is observed on 64bit machine while loading the driver. It is fixed if we pass dynamically allocated memory to SDIO for DMA. BUG: unable to handle kernel paging request at ffffeb04000172e0 IP: sg_miter_stop+0x56/0x70 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Modules linked in: rsi_sdio(OE+) rsi_91x(OE) btrsi(OE) rfcomm bluetooth ecdh_generic mac80211 mmc_block fuse xt_CHECKSUM iptable_mangle drm_kms_helper mmc_core serio_raw drm firewire_ohci tg3 CPU: 0 PID: 4003 Comm: insmod Tainted: G OE 4.16.0-rc1+ #27 Hardware name: Dell Inc. Latitude E5500 /0DW634, BIOS A19 06/13/2013 RIP: 0010:sg_miter_stop+0x56/0x70 RSP: 0018:ffff88007d003e78 EFLAGS: 00010002 RAX: 0000000000000003 RBX: 0000000000000004 RCX: 0000000000000000 RDX: ffffeb04000172c0 RSI: ffff88002f58002c RDI: ffff88007d003e80 RBP: 0000000000000004 R08: ffff88007d003e80 R09: 0000000000000008 R10: 0000000000000003 R11: 0000000000000001 R12: 0000000000000004 R13: ffff88002f580028 R14: 0000000000000000 R15: 0000000000000004 FS: 00007f35c29db700(0000) GS:ffff88007d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffeb04000172e0 CR3: 000000007038e000 CR4: 00000000000406f0 Call Trace: <IRQ> sg_copy_buffer+0xc6/0xf0 sdhci_tasklet_finish+0x170/0x260 [sdhci] tasklet_action+0xf4/0x100 __do_softirq+0xef/0x26e irq_exit+0xbe/0xd0 do_IRQ+0x4a/0xc0 common_interrupt+0xa2/0xa2 </IRQ> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rsi: fix error path handling in SDIO probeAmitkumar Karwar
We miss to release IRQ in certain error path in SDIO probe which causes following kernel panic. This patch corrects error path handling BUG: unable to handle kernel NULL pointer dereference at (null) IP: (null) PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI Call Trace: <IRQ> ? call_timer_fn+0x29/0x120 ? run_timer_softirq+0x1da/0x420 ? timer_interrupt+0x11/0x20 ? __do_softirq+0xef/0x26e ? irq_exit+0xbe/0xd0 ? do_IRQ+0x4a/0xc0 ? common_interrupt+0xa2/0xa2 </IRQ> ? cpuidle_enter_state+0x118/0x250 ? do_idle+0x186/0x1e0 ? cpu_startup_entry+0x6f/0x80 ? start_kernel+0x47c/0x49c ? secondary_startup_64+0xa5/0xb0 Fixes: 50117605770c ("rsi: improve RX handling in SDIO interface") Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rsi: remove redundant duplicate assignment of buffer_sizeColin Ian King
Variable buffer_size is re-assigned the same value, this duplicated assignment is redundant and can be removed. Cleans up clang warning: drivers/net/wireless/rsi/rsi_91x_usb.c:140:4: warning: Value stored to 'buffer_size' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27drm/i915: Fix hibernation with ACPI S0 target stateImre Deak
After commit dd9f31c7a3887950cbd0d49eb9d43f7a1518a356 Author: Imre Deak <imre.deak@intel.com> Date: Wed Aug 16 17:46:07 2017 +0300 drm/i915/gen9+: Set same power state before hibernation image save/restore during hibernation/suspend the power domain functionality got disabled, after which resume could leave it incorrectly disabled if the ACPI target state was S0 during suspend and i915 was not loaded by the loader kernel. This was caused by not considering if we resumed from hibernation as the condition for power domains reiniting. Fix this by simply tracking if we suspended power domains during system suspend and reinit power domains accordingly during resume. This will result in reiniting power domains always when resuming from hibernation, regardless of the platform and whether or not i915 is loaded by the loader kernel. The reason we didn't catch this earlier is that the enabled/disabled state of power domains during PMSG_FREEZE/PMSG_QUIESCE is platform and kernel config dependent: on my SKL the target state is S4 during PMSG_FREEZE and (with the driver loaded in the loader kernel) S0 during PMSG_QUIESCE. On the reporter's machine it's S0 during PMSG_FREEZE but (contrary to this) power domains are not initialized during PMSG_QUIESCE since i915 is not loaded in the loader kernel, or it's loaded but without the DMC firmware being available. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105196 Reported-and-tested-by: amn-bas@hotmail.com Fixes: dd9f31c7a388 ("drm/i915/gen9+: Set same power state before hibernation image save/restore") Cc: amn-bas@hotmail.com Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180322143642.26883-1-imre.deak@intel.com (cherry picked from commit 0f90603c33bdf6575cfdc81edd53f3f13ba166fb) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-03-27drm/i915/execlists: Use a locked clear_bit() for synchronisation with interruptChris Wilson
We were relying on the uncached reads when processing the CSB to provide ourselves with the serialisation with the interrupt handler (so we could detect new interrupts in the middle of processing the old one). However, in commit 767a983ab255 ("drm/i915/execlists: Read the context-status HEAD from the HWSP") those uncached reads were eliminated (on one path at least) and along with them our serialisation. The result is that we would very rarely miss notification of a new interrupt and leave a context-switch unprocessed, hanging the GPU. Fixes: 767a983ab255 ("drm/i915/execlists: Read the context-status HEAD from the HWSP") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180321091027.21034-1-chris@chris-wilson.co.uk (cherry picked from commit 9153e6b7c85edbc89e874e5c83f86217c53dcfaf) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-03-27drm/i915: Specify which engines to reset following semaphore/event lockupsChris Wilson
If the GPU is stuck waiting for an event or for a semaphore, we need to reset the GPU in order to recover. We have to tell the reset routine which engines we want reset, but we were still using the old interface and declaring it as "not-fatal". Fixes: 14b730fcb8d9 ("drm/i915/tdr: Prepare error handler to accept mask of hung engines") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180320100449.1360-1-chris@chris-wilson.co.uk (cherry picked from commit ca98317b89428e6ac17be0938b467ed78654dd56) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-03-27drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.Dhinakaran Pandiyan
If bios sets up an MST output and hardware state readout code sees this is an SST configuration, when disabling the encoder we end up calling ->post_disable_dp() hook instead of the MST version. Consequently, we write to the DP_SET_POWER dpcd to set it D3 state. Further along when we try enable the encoder in MST mode, POWER_UP_PHY transaction fails to power up the MST hub. This results in continuous link training failures which keep the system busy delaying boot. We could identify bios MST boot discrepancy and handle it accordingly but a simple way to solve this is to write to the DP_SET_POWER dpcd for MST too. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105470 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-by: Laura Abbott <labbott@redhat.com> Cc: stable@vger.kernel.org Fixes: 5ea2355a100a ("drm/i915/mst: Use MST sideband message transactions for dpms control") Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180314054825.1718-1-dhinakaran.pandiyan@intel.com (cherry picked from commit ad260ab32a4d94fa974f58262f8000472d34fd5b) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-03-27rsi: Remove stack VLA usageTobin C. Harding
The use of stack Variable Length Arrays needs to be avoided, as they can be a vector for stack exhaustion, which can be both a runtime bug (kernel Oops) or a security flaw (overwriting memory beyond the stack). Also, in general, as code evolves it is easy to lose track of how big a VLA can get. Thus, we can end up having runtime failures that are hard to debug. As part of the directive[1] to remove all VLAs from the kernel, and build with -Wvla. Currently rsi code uses a VLA based on a function argument to `rsi_sdio_load_data_master_write()`. The function call chain is Both these functions rsi_sdio_reinit_device() rsi_probe() start the call chain: rsi_hal_device_init() rsi_load_fw() auto_fw_upgrade() ping_pong_write() rsi_sdio_load_data_master_write() [Without familiarity with the code] it appears that none of the 4 locks mutex rx_mutex tx_mutex tx_bus_mutex are held when `rsi_sdio_load_data_master_write()` is called. It is therefore safe to use kmalloc with GFP_KERNEL. We can avoid using the VLA by using `kmalloc()` and free'ing the memory on all exit paths. Change buffer from 'u8 array' to 'u8 *'. Call `kmalloc()` to allocate memory for the buffer. Using goto statement to call `kfree()` on all return paths. It can be expected that this patch will result in a small increase in overhead due to the use of `kmalloc()` however this code is only called on initialization (and re-initialization) so this overhead should not degrade performance. [1] https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27mwifiex: remove warnings in mwifiex_cmd_append_11n_tlv()Ganapathi Bhat
Fix the following sparse warning in mwifiex_cmd_append_11n_tlv: drivers/net/wireless/marvell/mwifiex/11n.c:358:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:358:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:358:65: right side has type int drivers/net/wireless/marvell/mwifiex/11n.c:360:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:360:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:360:65: right side has type int drivers/net/wireless/marvell/mwifiex/11n.c:366:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:366:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:366:65: right side has type int drivers/net/wireless/marvell/mwifiex/11n.c:368:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:368:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:368:65: right side has type int Fixes: 77423fa73927 ("mwifiex: fix incorrect ht capability problem") Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27wireless: Use octal not symbolic permissionsJoe Perches
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27x86/alternatives: Fixup alternative_call_2Alexey Dobriyan
The following pattern fails to compile while the same pattern with alternative_call() does: if (...) alternative_call_2(...); else alternative_call_2(...); as it expands into if (...) { }; <=== else { }; Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20180114120504.GA11368@avx2
2018-03-27Merge tag 'drm-amdkfd-fixes-2018-03-25' of ↵Dave Airlie
git://people.freedesktop.org/~gabbayo/linux into drm-fixes - Programming VMID correctly for scratch memory with HWS - deallocating SDMA queues correctly in various situations * tag 'drm-amdkfd-fixes-2018-03-25' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: Deallocate SDMA queues correctly drm/amdkfd: Fix scratch memory with HWS enabled
2018-03-27Bluetooth: btrsi: rework dependenciesArnd Bergmann
The linkage between the bluetooth driver and the wireless driver is not defined properly, leading to build problems such as: warning: (BT_HCIRSI) selects RSI_COEX which has unmet direct dependencies (NETDEVICES && WLAN && WLAN_VENDOR_RSI && BT_HCIRSI && RSI_91X) drivers/net/wireless/rsi/rsi_91x_main.o: In function `rsi_read_pkt': (.text+0x205): undefined reference to `rsi_bt_ops' As the dependency is actually the reverse (RSI_91X uses the BT_RSI driver, not the other way round), this changes the dependency to match, and enables the bluetooth driver from the RSI_COEX symbol. Fixes: 38aa4da50483 ("Bluetooth: btrsi: add new rsi bluetooth driver") Acked-by; Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.17. Major changes: wil6210 * support multiple virtual interfaces
2018-03-27x86/mm/32: Remove unused node_memmap_size_bytes() & ↵David Rientjes
CONFIG_NEED_NODE_MEMMAP_SIZE logic node_memmap_size_bytes() has been unused since the v3.9 kernel, so remove it. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Fixes: f03574f2d5b2 ("x86-32, mm: Rip out x86_32 NUMA remapping code") Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1803262325540.256524@chino.kir.corp.google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-27Merge tag 'v4.16-rc7' into x86/mm, to fix up conflictIngo Molnar
Conflicts: arch/x86/mm/init_64.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-27perf/x86/intel: Fix linear IP of PEBS real_ip on Haswell and later CPUsStephane Eranian
this patch fix a bug in how the pebs->real_ip is handled in the PEBS handler. real_ip only exists in Haswell and later processor. It is actually the eventing IP, i.e., where the event occurred. As opposed to the pebs->ip which is the PEBS interrupt IP which is always off by one. The problem is that the real_ip just like the IP needs to be fixed up because PEBS does not record all the machine state registers, and in particular the code segement (cs). This is why we have the set_linear_ip() function. The problem was that set_linear_ip() was only used on the pebs->ip and not the pebs->real_ip. We have profiles which ran into invalid callstacks because of this. Here is an example: ..... 0: ffffffffffffff80 recent entry, marker kernel v ..... 1: 000000000040044d <= user address in kernel space! ..... 2: fffffffffffffe00 marker enter user v ..... 3: 000000000040044d ..... 4: 00000000004004b6 oldest entry Debugging output in get_perf_callchain(): [ 857.769909] CALLCHAIN: CPU8 ip=40044d regs->cs=10 user_mode(regs)=0 The problem is that the kernel entry in 1: points to a user level address. How can that be? The reason is that with PEBS sampling the instruction that caused the event to occur and the instruction where the CPU was when the interrupt was posted may be far apart. And sometime during that time window, the privilege level may change. This happens, for instance, when the PEBS sample is taken close to a kernel entry point. Here PEBS, eventing IP (real_ip) captured a user level instruction. But by the time the PMU interrupt fired, the processor had already entered kernel space. This is why the debug output shows a user address with user_mode() false. The problem comes from PEBS not recording the code segment (cs) register. The register is used in x86_64 to determine if executing in kernel vs user space. This is okay because the kernel has a software workaround called set_linear_ip(). But the issue in setup_pebs_sample_data() is that set_linear_ip() is never called on the real_ip value when it is available (Haswell and later) and precise_ip > 1. This patch fixes this problem and eliminates the callchain discrepancy. The patch restructures the code around set_linear_ip() to minimize the number of times the IP has to be set. Signed-off-by: Stephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Link: http://lkml.kernel.org/r/1521788507-10231-1-git-send-email-eranian@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-27objtool: Add Clang supportJosh Poimboeuf
Since the ORC unwinder was made the default on x86_64, Clang-built defconfig kernels have triggered some new objtool warnings: drivers/gpu/drm/i915/i915_gpu_error.o: warning: objtool: i915_error_printf()+0x6c: return with modified stack frame drivers/gpu/drm/i915/intel_display.o: warning: objtool: pipe_config_err()+0xa6: return with modified stack frame The problem is that objtool has never seen clang-built binaries before. Shockingly enough, objtool is apparently able to follow the code flow mostly fine, except for one instruction sequence. Instead of a LEAVE instruction, clang restores RSP and RBP the long way: 67c: 48 89 ec mov %rbp,%rsp 67f: 5d pop %rbp Teach objtool about this new code sequence. Reported-and-test-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/fce88ce81c356eedcae7f00ed349cfaddb3363cc.1521741586.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-27perf/x86: Update rdpmc_always_available static key to the modern APIDavidlohr Bueso
No changes in refcount semantics -- use DEFINE_STATIC_KEY_FALSE() for initialization and replace: static_key_slow_inc|dec() => static_branch_inc|dec() static_key_false() => static_branch_unlikely() Added a '_key' suffix to rdpmc_always_available, for better self-documentation. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Link: http://lkml.kernel.org/r/20180326210929.5244-5-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-27sched/core: Update preempt_notifier_key to modern APIDavidlohr Bueso
No changes in refcount semantics, use DEFINE_STATIC_KEY_FALSE() for initialization and replace: static_key_slow_inc|dec() => static_branch_inc|dec() static_key_false() => static_branch_unlikely() Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Link: http://lkml.kernel.org/r/20180326210929.5244-4-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-26Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2018-03-26 This patch series adds the ice driver, which will support the Intel(R) E800 Series of network devices. This is the first phase in the release of this driver where we implement basic transmit and receive. The idea behind the multi-phase release is to aid in code review as well as testing. Subsequent phases will implement advanced features (like SR-IOV, tunnelling, flow director, QoS, etc.) that build upon the previous phase(s). Each phase will be submitted as a patch series. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26i40e: add support for XDP_REDIRECTBjörn Töpel
The driver now acts upon the XDP_REDIRECT return action. Two new ndos are implemented, ndo_xdp_xmit and ndo_xdp_flush. XDP_REDIRECT action enables XDP program to redirect frames to other netdevs. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-26i40e: tweak page counting for XDP_REDIRECTBjörn Töpel
This commit tweaks the page counting for XDP_REDIRECT to function properly. XDP_REDIRECT support will be added in a future commit. The current page counting scheme assumes that the reference count cannot decrease until the received frame is sent to the upper layers of the networking stack. This assumption does not hold for the XDP_REDIRECT action, since a page (pointed out by xdp_buff) can have its reference count decreased via the xdp_do_redirect call. To work around that, we now start off by a large page count and then don't allow a refcount less than two. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-26i40e: re-number feature flags to remove gapsJacob Keller
Remove the gaps created by the recent refactor of various feature flags that have moved to the state field. Use only a u32 now that we have fewer than 32 flags in the field. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-26net/mlx5e: Sync netdev vxlan ports at openShahar Klein
When mlx5_core is loaded it is expected to sync ports with all vxlan devices so it can support vxlan encap/decap. This is done via udp_tunnel_get_rx_info(). Currently this call is set in mlx5e_nic_enable() and if the netdev is not in NETREG_REGISTERED state it will not be called. Normally on load the netdev state is not NETREG_REGISTERED so udp_tunnel_get_rx_info() will not be called. Moving udp_tunnel_get_rx_info() to mlx5e_open() so it will be called on netdev UP event and allow encap/decap. Fixes: 610e89e05c3f ("net/mlx5e: Don't sync netdev state when not registered") Signed-off-by: Shahar Klein <shahark@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5e: Avoid using the ipv6 stub in the TC offload neigh update pathOr Gerlitz
Currently we use the global ipv6_stub var to access the ipv6 global nd table. This practice gets us to troubles when the stub is only partially set e.g when ipv6 is loaded under the disabled policy. In this case, as of commit 343d60aada5a ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument") the stub is not null, but stub->nd_tbl is and we crash. As we can access the ipv6 nd_tbl directly, the fix is just to avoid the reference through the stub. There is one place in the code where we issue ipv6 route lookup and keep doing it through the stub, but that mentioned commit makes sure we get -EAFNOSUPPORT from the stack. Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow") Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5e: Fix memory usage issues in offloading TC flowsJianbo Liu
For NIC flows, the parsed attributes are not freed when we exit successfully from mlx5e_configure_flower(). There is possible double free for eswitch flows. If error is returned from rhashtable_insert_fast(), the parse attrs will be freed in mlx5e_tc_del_flow(), but they will be freed again before exiting mlx5e_configure_flower(). To fix both issues we do the following: (1) change the condition that determines if to issue the free call to check if this flow is NIC flow, or it does not have encap action. (2) reorder the code such that that the check and free calls are done before we attempt to add into the hash table. Fixes: 232c001398ae ('net/mlx5e: Add support to neighbour update flow') Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5e: Fix traffic being dropped on VF representorRoi Dayan
Increase representor netdev RQ size to avoid dropped packets. The current size (two) is just too small to keep up with conventional slow path traffic patterns. Also match the SQ size to the RQ size. Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-26net/mlx5e: Verify coalescing parameters in rangeMoshe Shemesh
Add check of coalescing parameters received through ethtool are within range of values supported by the HW. Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the users through ethtool. The ethtool support up to 32 bit value for each. However, mlx5 modify cq limits the coalescing time parameter to 12 bit and coalescing frames parameters to 16 bits. Return out of range error if user tries to set these parameters to higher values. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit (git 2.34.1) at 2025-09-15 16:08:37 +0000