| Age | Commit message (Collapse) | Author |
|---|
|
Check memory allocation failures and return -ENOMEM in such cases
This avoids a potential NULL pointer dereference.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
|
|
These files were missing it before.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Was missing license text.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
PMU (system-controller@10040000) is used as interrupt-parent for certain
nodes thus it should be marked as interrupt-controller to silence
warnings when building Exynos5410-based DTBs:
arch/arm/boot/dts/exynos5410-odroidxu.dtb: Warning (interrupts_property):
Missing interrupt-controller or interrupt-map property in /soc/system-controller@10040000
arch/arm/boot/dts/exynos5410-odroidxu.dtb: Warning (interrupts_property):
Missing #interrupt-cells in interrupt-parent /soc/system-controller@10040000
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Audio power domain includes following hardware modules: Pin controller
for GPZ bank, AudioSS clock controller, PL330 ADMA device and Exynos I2S
controller.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Looking at the schematic, LDO15 and LDO17 are tied as a power source of a
builtin network chipset. Correct voltage on LDO15 to 3.3V and the name
of LDO17 to "vdd_ldo17".
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Exynos4412 ISP clock controller is located in the SOC area, which belongs
to ISP power domain. This patch instantiates a separate clock driver
for those clocks, updates all clients of ISP clocks and ensures that the
driver is properly integrated in ISP power domin.
This finally solves all the mysterious freezes in accessing ISP clocks
when ISP power domain is disabled.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Current the node is only defined in the exynos5250 DT, while
the corresponding SYSMMUs are also to be found in the exynos5420
DT. Move the node to exynos5 and only setup the SYSMMUs in the
corresponding DT.
Disable the node by default, since exynos5410 also includes
the dtsi, but currently does not define the G2D clock.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
[mszyprow: rephrased commit message]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Enable support for ARM Performance Monitoring Units available in Cortex-A7
and Cortex-A15 CPU cores for Exynos54xx SoCs (5410, 5420 and 5422/5800).
The PMUs interrupts are defined in the common exynos54xx.dtsi device tree,
but the PMUs are enabled and have their interrupt CPU affinity defined
next to each SoC's cpus node.
Tested with perf on Odroid XU4 (Exynos5422):
armv7_cortex_a7 PMU driver: 5 counters available
armv7_cortex_a15 PMU driver: 7 counters available
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marian Mihailescu <mihailescu2m@gmail.com>
Signed-off-by: Willy Wolff <willy.mh.wolff@gmail.com>
[mszyprow: reordered nodes according to krzk request, fixed typos]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
9074 5592 416 15082 3aea drivers/bus/arm-ccn.o
File size After adding 'const':
text data bss dec hex filename
9327 5336 416 15079 3ae7 drivers/bus/arm-ccn.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
|
|
created
A NULL pointer is seen if two concurrent "vgchange -ay -K <vg name>"
processes race to load the dm-thin-pool module:
PID: 25992 TASK: ffff883cd7d23500 CPU: 4 COMMAND: "vgchange"
#0 [ffff883cd743d600] machine_kexec at ffffffff81038fa9
0000001 [ffff883cd743d660] crash_kexec at ffffffff810c5992
0000002 [ffff883cd743d730] oops_end at ffffffff81515c90
0000003 [ffff883cd743d760] no_context at ffffffff81049f1b
0000004 [ffff883cd743d7b0] __bad_area_nosemaphore at ffffffff8104a1a5
0000005 [ffff883cd743d800] bad_area at ffffffff8104a2ce
0000006 [ffff883cd743d830] __do_page_fault at ffffffff8104aa6f
0000007 [ffff883cd743d950] do_page_fault at ffffffff81517bae
0000008 [ffff883cd743d980] page_fault at ffffffff81514f95
[exception RIP: kmem_cache_alloc+108]
RIP: ffffffff8116ef3c RSP: ffff883cd743da38 RFLAGS: 00010046
RAX: 0000000000000004 RBX: ffffffff81121b90 RCX: ffff881bf1e78cc0
RDX: 0000000000000000 RSI: 00000000000000d0 RDI: 0000000000000000
RBP: ffff883cd743da68 R8: ffff881bf1a4eb00 R9: 0000000080042000
R10: 0000000000002000 R11: 0000000000000000 R12: 00000000000000d0
R13: 0000000000000000 R14: 00000000000000d0 R15: 0000000000000246
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
0000009 [ffff883cd743da70] mempool_alloc_slab at ffffffff81121ba5
0000010 [ffff883cd743da80] mempool_create_node at ffffffff81122083
0000011 [ffff883cd743dad0] mempool_create at ffffffff811220f4
0000012 [ffff883cd743dae0] pool_ctr at ffffffffa08de049 [dm_thin_pool]
0000013 [ffff883cd743dbd0] dm_table_add_target at ffffffffa0005f2f [dm_mod]
0000014 [ffff883cd743dc30] table_load at ffffffffa0008ba9 [dm_mod]
0000015 [ffff883cd743dc90] ctl_ioctl at ffffffffa0009dc4 [dm_mod]
The race results in a NULL pointer because:
Process A (vgchange -ay -K):
a. send DM_LIST_VERSIONS_CMD ioctl;
b. pool_target not registered;
c. modprobe dm_thin_pool and wait until end.
Process B (vgchange -ay -K):
a. send DM_LIST_VERSIONS_CMD ioctl;
b. pool_target registered;
c. table_load->dm_table_add_target->pool_ctr;
d. _new_mapping_cache is NULL and panic.
Note:
1. process A and process B are two concurrent processes.
2. pool_target can be detected by process B but
_new_mapping_cache initialization has not ended.
To fix dm-thin-pool, and other targets (cache, multipath, and snapshot)
with the same problem, simply dm_register_target() after all resources
created during module init (as labelled with __init) are finished.
Cc: stable@vger.kernel.org
Signed-off-by: monty <monty_pavel@sina.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
conversion
Multiple refcounts are needed if the device was already added. The
micro-optimization of setting the refcount to 1 on first added (rather
than fall thru to a common refcount_inc) lost sight of the fact that the
refcount_inc is also needed for the case when the device already exists
and the mode need not be upgraded.
Fixes: 2a0b4682e0 ("dm: convert dm_dev_internal.count from atomic_t to refcount_t")
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Prevent rpm_get_suppliers() from returning an error code if runtime
PM is disabled for one or more of the supplier devices it wants to
runtime-resume, so as to make runtime PM work for devices with links
to suppliers that don't use runtime PM (such links may be created
during device enumeration even before it is known whether or not
runtime PM will be enabled for the devices in question, for example).
Fixes: 21d5c57b3726 (PM / runtime: Use device links)
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
|
|
We might include additional ports in derivative device trees, so the
'port' node should have an address, and the parent 'ports' node needs
/#{addres,size}-cells.
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
We are incorrectly rearranging 32-bit words inside a 64-bit typed value
for big endian systems, which would result in never marking a virtual
interrupt as inactive on big endian systems (assuming 32 or fewer LRs on
the hardware). Fix this by not doing any word order manipulation for
the typed values.
Cc: <stable@vger.kernel.org>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
|
|
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
|
|
By passing an export descriptor to the write function, users don't need to
keep a global static pointer and can rely on container_of() to fetch their
own structure.
Link: http://lkml.kernel.org/r/20170602102025.5140-1-felipe.balbi@linux.intel.com
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
This fixes the following warning when building with clang:
kernel/trace/ring_buffer.c:1842:1: error: unused function
'__rb_data_page_index' [-Werror,-Wunused-function]
Link: http://lkml.kernel.org/r/20170518001415.5223-1-mka@chromium.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
When CONFIG_TRACING is disabled, the new preemptirq events tracer
produces a build failure:
In file included from kernel/trace/trace_irqsoff.c:17:0:
kernel/trace/trace.h: In function 'trace_test_and_set_recursion':
kernel/trace/trace.h:542:28: error: 'struct task_struct' has no member named 'trace_recursion'
Adding an explicit dependency avoids the broken configuration.
Link: http://lkml.kernel.org/r/20171103104031.270375-1-arnd@arndb.de
Fixes: d59158162e03 ("tracing: Add support for preempt and irq enable/disable events")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The default NR_CPUS can be very large, but actual possible nr_cpu_ids
usually is very small. For my x86 distribution, the NR_CPUS is 8192 and
nr_cpu_ids is 4. About 2 pages are wasted.
Most machines don't have so many CPUs, so define a array with NR_CPUS
just wastes memory. So let's allocate the buffer dynamically when need.
With this change, the mutext tracing_cpumask_update_lock also can be
removed now, which was used to protect mask_str.
Link: http://lkml.kernel.org/r/1512013183-19107-1-git-send-email-changbin.du@intel.com
Fixes: 36dfe9252bd4c ("ftrace: make use of tracing_cpumask")
Cc: stable@vger.kernel.org
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
We get a build error in the irqsoff tracer in some configurations:
kernel/trace/trace_irqsoff.c: In function 'trace_preempt_on':
kernel/trace/trace_irqsoff.c:855:2: error: implicit declaration of function 'trace_preempt_enable_rcuidle'; did you mean 'trace_irq_enable_rcuidle'? [-Werror=implicit-function-declaration]
trace_preempt_enable_rcuidle(a0, a1);
The problem is that trace_preempt_enable_rcuidle() has different
definition based on multiple Kconfig symbols, but not all combinations
have a valid definition.
This changes the conditions so that we always get exactly one
definition of each of the four tracing macros. I have not tried
to verify that these definitions are sensible, but now we
can build all randconfig combinations again.
Link: http://lkml.kernel.org/r/20171019083230.2450779-1-arnd@arndb.de
Fixes: d59158162e03 ("tracing: Add support for preempt and irq enable/disable events")
Acked-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Naming in code comments for tracing_snapshot, tracing_snapshot_alloc
and trace_pid_filter_add_remove_task don't match the real function
names. And latency_trace has been removed from tracing directory.
Fix them.
Link: http://lkml.kernel.org/r/1508394753-20887-1-git-send-email-chuhu@redhat.com
Fixes: cab5037 ("tracing/ftrace: Enable snapshot function trigger")
Fixes: 886b5b7 ("tracing: remove /debug/tracing/latency_trace")
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
[ Replaced /sys/kernel/debug/tracing with /sys/kerne/tracing ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The originator node object orig_neigh_node is used to when accessing the
bcast_own(_sum) and real_packet_count information. The access to them has
to be protected with the spinlock in orig_neigh_node.
But the function uses the lock in orig_node instead. This is incorrect
because they could be two different originator node objects.
Fixes: 0ede9f41b217 ("batman-adv: protect bit operations to count OGMs with spinlock")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Check whether inputs from userspace are too long (explicit length field too
big or string not null-terminated) to avoid out-of-bounds reads.
As far as I can tell, this can at worst lead to very limited kernel heap
memory disclosure or oopses.
This bug can be triggered by an unprivileged user even if the xt_bpf module
is not loaded: iptables is available in network namespaces, and the xt_bpf
module can be autoloaded.
Triggering the bug with a classic BPF filter with fake length 0x1000 causes
the following KASAN report:
==================================================================
BUG: KASAN: slab-out-of-bounds in bpf_prog_create+0x84/0xf0
Read of size 32768 at addr ffff8801eff2c494 by task test/4627
CPU: 0 PID: 4627 Comm: test Not tainted 4.15.0-rc1+ #1
[...]
Call Trace:
dump_stack+0x5c/0x85
print_address_description+0x6a/0x260
kasan_report+0x254/0x370
? bpf_prog_create+0x84/0xf0
memcpy+0x1f/0x50
bpf_prog_create+0x84/0xf0
bpf_mt_check+0x90/0xd6 [xt_bpf]
[...]
Allocated by task 4627:
kasan_kmalloc+0xa0/0xd0
__kmalloc_node+0x47/0x60
xt_alloc_table_info+0x41/0x70 [x_tables]
[...]
The buggy address belongs to the object at ffff8801eff2c3c0
which belongs to the cache kmalloc-2048 of size 2048
The buggy address is located 212 bytes inside of
2048-byte region [ffff8801eff2c3c0, ffff8801eff2cbc0)
[...]
==================================================================
Fixes: e6f30c731718 ("netfilter: x_tables: add xt_bpf match")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The capability check in nfnetlink_rcv() verifies that the caller
has CAP_NET_ADMIN in the namespace that "owns" the netlink socket.
However, nfnl_cthelper_list is shared by all net namespaces on the
system. An unprivileged user can create user and net namespaces
in which he holds CAP_NET_ADMIN to bypass the netlink_net_capable()
check:
$ nfct helper list
nfct v1.4.4: netlink error: Operation not permitted
$ vpnns -- nfct helper list
{
.name = ftp,
.queuenum = 0,
.l3protonum = 2,
.l4protonum = 6,
.priv_data_len = 24,
.status = enabled,
};
Add capable() checks in nfnetlink_cthelper, as this is cleaner than
trying to generalize the solution.
Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch adds the information for the secondary MIPI DSI controller,
e.g., interrupts, grf, clocks, ports and so on. Mirrors the existing
definition for dsi0.
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
We've documented this one already, but we didn't add it to the DTSI yet.
Suggested-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
"default_sata_clkdm" does not exist, instead replace this with the
correct clockdomain name which is just "default_clkdm".
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
Add support for the address translation logic for am33xx. Needed for
mapping hwmods towards their corresponding clkctrl providers and clocks.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
Needed for mapping the hwmods towards their corresponding clkctrl
providers and clocks.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
This is no longer used for anything so it can be dropped.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
There are cases where clkctrl clock offsets do not match the corresponding
clockdomain, and this case the existing mapping functionality will fail.
Fix this by adding the whole address range for a clkctrl provider and
matching the actual clkctrl registers against these ranges.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
Needed to map clkctrl clocks against hwmods. This patch also removes
the obsolete clkdm_xlate_address function which is no longer needed
for anything.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
Add a new CM API for fetching the physical address of a hwmod clkctrl
register. This is needed to map omap hwmods against clkctrl clocks, the
existing support for clkdm address translation was not sufficient to
handle the mutant cases where the clockdomain offset is completely
off from the clkctrl ones.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
Define the V3M Starter Kit board dependent part of the EtherAVB
device node.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Add the initial device tree for the V3M Starter Kit board.
The board has 1 debug serial port (SCIF0); include support for it,
so that the serial console can work.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Commits 7d29f509d2cfd807 ("dt-bindings: i2c: i2c-gpio: Add support for
named gpios") and 05c74778858d7d99 ("i2c: gpio: Add support for named
gpios in DT") introduced named i2c-gpio DT bindings, and deprecated the
more error-prone unnamed variant.
Switch to the new bindings, and add the missing GPIO_OPEN_DRAIN I/O
flags, which were implicitly assumed before.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Commits 7d29f509d2cfd807 ("dt-bindings: i2c: i2c-gpio: Add support for
named gpios") and 05c74778858d7d99 ("i2c: gpio: Add support for named
gpios in DT") introduced named i2c-gpio DT bindings, and deprecated the
more error-prone unnamed variant.
Switch to the new bindings, and add the missing GPIO_OPEN_DRAIN I/O
flags, which were implicitly assumed before.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Commits 7d29f509d2cfd807 ("dt-bindings: i2c: i2c-gpio: Add support for
named gpios") and 05c74778858d7d99 ("i2c: gpio: Add support for named
gpios in DT") introduced named i2c-gpio DT bindings, and deprecated the
more error-prone unnamed variant.
Switch to the new bindings, and add the missing GPIO_OPEN_DRAIN I/O
flags, which were implicitly assumed before.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Commits 7d29f509d2cfd807 ("dt-bindings: i2c: i2c-gpio: Add support for
named gpios") and 05c74778858d7d99 ("i2c: gpio: Add support for named
gpios in DT") introduced named i2c-gpio DT bindings, and deprecated the
more error-prone unnamed variant.
Switch to the new bindings, and add the missing GPIO_OPEN_DRAIN I/O
flags, which were implicitly assumed before.
The latter gets rid of the message:
gpio-208 (?): enforced open drain please flag it properly in DT/ACPI DSDT/board file
gpio-91 (?): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
snd_usb_copy_string_desc() returns zero if usb_string() fails.
In case of failure, we need to check the snd_usb_copy_string_desc()'s
return value and add an exception case
Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The snd_usb_copy_string_desc() retrieves the usb string corresponding to
the index number through the usb_string(). The problem is that the
usb_string() returns the length of the string (>= 0) when successful, but
it can also return a negative value about the error case or status of
usb_control_msg().
If iClockSource is '0' as shown below, usb_string() will returns -EINVAL.
This will result in '0' being inserted into buf[-22], and the following
KASAN out-of-bound error message will be output.
AudioControl Interface Descriptor:
bLength 8
bDescriptorType 36
bDescriptorSubtype 10 (CLOCK_SOURCE)
bClockID 1
bmAttributes 0x07 Internal programmable Clock (synced to SOF)
bmControls 0x07
Clock Frequency Control (read/write)
Clock Validity Control (read-only)
bAssocTerminal 0
iClockSource 0
To fix it, check usb_string()'return value and bail out.
==================================================================
BUG: KASAN: stack-out-of-bounds in parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
Write of size 1 at addr ffff88007e66735a by task systemd-udevd/18376
CPU: 0 PID: 18376 Comm: systemd-udevd Not tainted 4.13.0+ #3
Hardware name: LG Electronics 15N540-RFLGL/White Tip Mountain, BIOS 15N5
Call Trace:
dump_stack+0x63/0x8d
print_address_description+0x70/0x290
? parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
kasan_report+0x265/0x350
__asan_store1+0x4a/0x50
parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
? save_stack+0xb5/0xd0
? save_stack_trace+0x1b/0x20
? save_stack+0x46/0xd0
? kasan_kmalloc+0xad/0xe0
? kmem_cache_alloc_trace+0xff/0x230
? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio]
? usb_audio_probe+0x4de/0xf40 [snd_usb_audio]
? usb_probe_interface+0x1f5/0x440
? driver_probe_device+0x3ed/0x660
? build_feature_ctl+0xb10/0xb10 [snd_usb_audio]
? save_stack_trace+0x1b/0x20
? init_object+0x69/0xa0
? snd_usb_find_csint_desc+0xa8/0xf0 [snd_usb_audio]
snd_usb_mixer_controls+0x1dc/0x370 [snd_usb_audio]
? build_audio_procunit+0x890/0x890 [snd_usb_audio]
? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio]
? kmem_cache_alloc_trace+0xff/0x230
? usb_ifnum_to_if+0xbd/0xf0
snd_usb_create_mixer+0x25b/0x4b0 [snd_usb_audio]
? snd_usb_create_stream+0x255/0x2c0 [snd_usb_audio]
usb_audio_probe+0x4de/0xf40 [snd_usb_audio]
? snd_usb_autosuspend.part.7+0x30/0x30 [snd_usb_audio]
? __pm_runtime_idle+0x90/0x90
? kernfs_activate+0xa6/0xc0
? usb_match_one_id_intf+0xdc/0x130
? __pm_runtime_set_status+0x2d4/0x450
usb_probe_interface+0x1f5/0x440
Cc: <stable@vger.kernel.org>
Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When user tries to group imc (In-Memory Collections) event with
normal event, (sometime) kernel crashes with following log:
Faulting instruction address: 0x00000000
[link register ] c00000000010ce88 power_check_constraints+0x128/0x980
...
c00000000010e238 power_pmu_event_init+0x268/0x6f0
c0000000002dc60c perf_try_init_event+0xdc/0x1a0
c0000000002dce88 perf_event_alloc+0x7b8/0xac0
c0000000002e92e0 SyS_perf_event_open+0x530/0xda0
c00000000000b004 system_call+0x38/0xe0
'event_base' field of 'struct hw_perf_event' is used as flags for
normal hw events and used as memory address for imc events. While
grouping these two types of events, collect_events() tries to
interpret imc 'event_base' as a flag, which causes a corruption
resulting in a crash.
Consider only those events which belongs to 'perf_hw_context' in
collect_events().
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-By: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently, fallocate(2) with KEEP_SIZE followed by a fdatasync(2)
then crash, we'll see wrong allocated block number (stat -c %b), the
blocks allocated beyond EOF are all lost. fstests generic/468
exposes this bug.
Commit 67a7d5f561f4 ("ext4: fix fdatasync(2) after extent
manipulation operations") fixed all the other extent manipulation
operation paths such as hole punch, zero range, collapse range etc.,
but forgot the fallocate case.
So similarly, fix it by recording the correct journal tid in ext4
inode in fallocate(2) path, so that ext4_sync_file() will wait for
the right tid to be committed on fdatasync(2).
This addresses the test failure in xfstests test generic/468.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
* fixes: (27 commits)
firmware: arm_scpi: Revert updates made during v4.15 merge window
arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv
arm64: dts: sort vendor subdirectories in Makefile alphabetically
MAINTAINERS: exclude other Socionext SoC DT files from ARM/UNIPHIER entry
arm64: dts: uniphier: remove unnecessary interrupt-parent
arm64: dts: uniphier: correct on-board device IRQ number for PXs3
optee: fix invalid of_node_put() in optee_driver_init()
Revert "ARM: dts: imx53: add srtc node"
ARM: dts: vf610-zii-dev-rev-c: Fix the I2C EEPROM address
ARM: dts: am437x-cm-t43: Correct the dmas property of spi0
ARM: dts: am4372: Correct the interrupts_properties of McASP
ARM: dts: logicpd-somlv: Fix wl127x pinmux
ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet
ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen
ARM: OMAP2+: Missing error code in omap_device_build()
ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function
ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context
ARM: dts: NSP: Fix PPI interrupt types
ARM: dts: NSP: Disable AHCI controller for HR NSP boards
ARM: dts: r8a779x: Add '#reset-cells' in cpg-mssr
...
|
|
Revert "Merge tag 'scpi-updates-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers"
Paraphrased from email from Kevin Hilman:
Revert ARM SCPI changes since v4.14.
Untested changes caused regressions in SCPI and CPUfreq/DVFS failures
on most Amlogic SoCs. Changes reverted for v4.15 so they can be better
reviewed and tested.
These ARM SCPI changes caused SCPI regressions resulting in CPUfreq
failures on most Amlogic SoCs (found by kernelci.org.)
Unfortunately, this was not caught in linux-next due to other bugs/panics
on these platforms masking this problem so we've only found it since
we've fixed the other issues.
Since we're already in the -rc cycle, I'd prefer to revert to a known
working state (that of v4.14) rather than finding/reverting a subset,
which would just lead to another untested state.
These changes can then have some time to be better reviewed and tested
and resubmitted for v4.16.
Kevin Hilman has tested this revert on the affected Amlogic SoCs and
verified that we're back to the previous (working) condition.
This reverts commit 6710acf2596a29f7351e8165d981645f403e0025, reversing
changes made to 4b367f2e8854da34d14bd154ff4432fb49f69b36.
Reported-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
407cd7fb83c0 (ext4: change fast symlink test to not rely on i_blocks)
broke ~10 years old ext3 file systems created by 2.6.17. Any ELF
executable fails because the /lib/ld-linux.so.2 fast symlink
cannot be read anymore.
The patch assumed fast symlinks were created in a specific way,
but that's not true on these really old file systems.
The new behavior is apparently needed only with the large EA inode
feature.
Revert to the old behavior if the large EA inode feature is not set.
This makes my old VM boot again.
Fixes: 407cd7fb83c0 (ext4: change fast symlink test to not rely on i_blocks)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for v4.15-rc cycle with two fixes for hangs with the
rest being compiler warning fixes and fixes for power states and devices
on various boards:
- Fix smatch issue introduced by recent omap device changes for legacy
resources
- Fix SRAM virt to phys related boot hang affecting n900 and other omap3 hs
devices found by pending CMA changes. While it seems that we have not hit
this in other use cases, let's fix it to avoid a nasty and hard to find
suprise as right now there is just luck keeping the SRAM virtual address
to physical address translation working with the 0xffff high_mask.
- Fix am335x reading of domain state registers that only exist for the
PM_CEFUSE domain and produce wrong results for other domains
- Fix missing setting for error code for omap device if allocation fails
- Fix missing modules_offs for omap3 MMC3 affecting n9/n950
- Fix cm_split_idlest() reading reserved registers showing wrong
idlestatus
- Fixes to correct #phy-cells property for compiler warnings that
recently started happening
- Add a missing OHCI remote-wakeup-connected property that I was supposed
to merge after the ohci-omap3 to ohci-platform changes but somehow managed
to drop. I only noticed this was missing while debugging the OHCI/EHCI GPS
and modem hang
- Fix a system hang with GPS or modem connected to the OHCI/EHCI bus that
typically happened within 20 - 40 minutes on an idle system. This turned
out to be an issue caused by using the parent interrupt controller directly
with the WUGEN + GIC stacked interrupt controller domains
- Fixes for logicpd-somlv GPMC for Ethernet and NAND that clearly
have been broken since we changed GPMC to use the interrupt controller
binding for some pins. And fix the wrong pin muxing for WLAN while at it
- Fixes for am437x interrupt and dma properties to fix compiler warnings
that recently started happening
* tag 'omap-for-v4.15/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am437x-cm-t43: Correct the dmas property of spi0
ARM: dts: am4372: Correct the interrupts_properties of McASP
ARM: dts: logicpd-somlv: Fix wl127x pinmux
ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet
ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen
ARM: OMAP2+: Missing error code in omap_device_build()
ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function
ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context
ARM: dts: Add remote-wakeup-connected for omap OHCI
ARM: dts: am33xx: Add missing #phy-cells to ti,am335x-usb-phy
ARM: dts: omap: Add missing #phy-cells to usb-nop-xceiv
ARM: OMAP2+: Fix smatch found issue for omap_device
ARM: OMAP2/3: CM: fix cm_split_idlest functionality
ARM: OMAP3: hwmod_data: add missing module_offs for MMC3
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Commit be7635e7287e ("arch, ftrace: for KASAN put hard/soft IRQ entries
into separate sections") added a new linker section, SOFTIRQENTRY_TEXT,
to the linker scripts for most architectures. It didn't add it to any of
the linker scripts for the m68k architecture. This was not really a problem
because it is only defined if either of CONFIG_FUNCTION_GRAPH_TRACER or
CONFIG_KASAN are enabled - which can never be true for m68k.
However commit 229a71860547 ("irq: Make the irqentry text section
unconditional") means that SOFTIRQENTRY_TEXT is now always defined. So on
m68k we now end up with a separate ELF section for .softirqentry.text
instead of it being part of the .text section. On some m68k targets in some
configurations this can also cause a fatal link error:
LD vmlinux
/usr/local/bin/../m68k-uclinux/bin/ld.real: section .softirqentry.text loaded at [0000000010de10c0,0000000010de12dd] overlaps section .rodata loaded at [0000000010de10c0,0000000010e0fd67]
To fix add in the missing SOFTIRQENTRY_TEXT section into the m68k linker
scripts. I noticed that m68k is also missing the IRQENTRY_TEXT section,
so this patch also adds an entry for that too.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
|
|
The pci/htirq.c file was removed so remove it from the documentation
file also.
Error: Cannot open file ../drivers/pci/htirq.c
WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno -export ../drivers/pci/htirq.c' failed with return code 2
Fixes: fd2fa6c18b72 ("x86/PCI: Remove unused HyperTransport interrupt support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
