| Age | Commit message (Collapse) | Author |
|---|
|
People complain when I miss people in Cc.
[ kees: Also add the ELF uapi doc link ]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Link: https://lore.kernel.org/r/2cb0891e-d7c0-4939-bb5f-282812de6078@p183
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
CXL 3.1 Section 3.1.1 states:
"A Function on a CXL device must not generate INTx messages if
that Function participates in CXL.cache protocol or CXL.mem
protocols."
The generic CXL memory driver only supports devices which use the
CXL.mem protocol. The current driver attempts to allocate MSI/MSI-X
vectors in anticipation of their need for mailbox interrupts or event
processing. However, the above requirement does not require a device to
support interrupts, only that they use MSI/MSI-X. For example, a device
may disable mailbox interrupts and either be configured for firmware
first or skip event processing and function.
Dave Larsen reported that the following Intel / Agilex card does not
support interrupts on function 0.
CXL: Intel Corporation Device 0ddb (rev 01) (prog-if 10 [CXL Memory Device (CXL 2.x)])
Rather than fail device probe if interrupts are not supported; flag that
irqs are not enabled and avoid features which require interrupts.
Emit messages appropriate for the situation to aid in debugging should
device behavior be unexpected due to a failure to allocate vectors.
Note that it is possible for a device to have host based event
processing through polling. However, the driver does not support
polling and it is not anticipated to be generally required. Leave that
functionality to a future patch if such a device comes along.
Reported-by: Dave Larsen <davelarsen58@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-and-tested-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20240117-dont-fail-irq-v2-1-f33f26b0e365@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Prevent warnings of the form:
tools/testing/nvdimm/config_check.c:4:6: error: no previous prototype
for ‘check’ [-Werror=missing-prototypes]
...by locally disabling some warnings.
It turns out that:
Commit 0fcb70851fbf ("Makefile.extrawarn: turn on missing-prototypes globally")
...in addition to expanding in-tree coverage, also impacts out-of-tree
module builds like those in tools/testing/nvdimm/.
Filter out the warning options on unit test code that does not effect
mainline builds.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/170543984331.460832.1780246477583036191.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Prevent warnings of the form:
tools/testing/cxl/test/mock.c:44:6: error: no previous prototype for
‘__wrap_is_acpi_device_node’ [-Werror=missing-prototypes]
tools/testing/cxl/test/mock.c:63:5: error: no previous prototype for
‘__wrap_acpi_table_parse_cedt’ [-Werror=missing-prototypes]
tools/testing/cxl/test/mock.c:81:13: error: no previous prototype for
‘__wrap_acpi_evaluate_integer’ [-Werror=missing-prototypes]
...by locally disabling some warnings.
It turns out that:
Commit 0fcb70851fbf ("Makefile.extrawarn: turn on missing-prototypes globally")
...in addition to expanding in-tree coverage, also impacts out-of-tree
module builds like those in tools/testing/cxl/.
Filter out the warning options on unit test code that does not effect
mainline builds.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/170543983780.460832.10920261849128601697.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull stringop-overflow warning update from Gustavo A. R. Silva:
"Enable -Wstringop-overflow globally.
I waited for the release of -rc1 to run a final build-test on top of
it before sending this pull request. Fortunatelly, after building 358
kernels overnight (basically all supported archs with a wide variety
of configs), no more warnings have surfaced! :)
Thus, we are in a good position to enable this compiler option for all
versions of GCC that support it, with the exception of GCC-11, which
appears to have some issues with this option [1]"
Link: https://lore.kernel.org/lkml/b3c99290-40bc-426f-b3d2-1aa903f95c4e@embeddedor.com/ [1]
* tag 'Wstringop-overflow-for-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
init: Kconfig: Disable -Wstringop-overflow for GCC-11
Makefile: Enable -Wstringop-overflow globally
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen netback fix from Juergen Gross:
"Transmit requests in Xen's virtual network protocol can consist of
multiple parts. While not really useful, except for the initial part
any of them may be of zero length, i.e. carry no data at all.
Besides a certain initial portion of the to be transferred data, these
parts are directly translated into what Linux calls SKB fragments.
Such converted request parts can, when for a particular SKB they are
all of length zero, lead to a de-reference of NULL in core networking
code"
* tag 'xsa448-6.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-netback: don't produce zero-size SKB frags
|
|
REQ_OP_FLUSH is only for internal use in the blk-mq and request based
drivers. File systems and other block layer consumers must use
REQ_OP_WRITE | REQ_PREFLUSH as documented in
Documentation/block/writeback_cache_control.rst.
While REQ_OP_FLUSH appears to work for blk-mq drivers it does not
get the proper flush state machine handling, and completely fails
for any bio based drivers, including all the stacking drivers. The
block layer will also get a check in 6.8 to reject this use case
entirely.
[Note: completely untested, but as this never got fixed since the
original bug report in November:
https://bugzilla.kernel.org/show_bug.cgi?id=218184
and the the discussion in December:
https://lore.kernel.org/all/20231221053016.72cqcfg46vxwohcj@moria.home.lan/T/
this seems to be best way to force it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes: e6a2566f7a00 ("bcachefs: Better journal tracepoints")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-by: smatch
|
|
Stephen Rothwell reported htmldocs warnings when merging drm-intel
tree:
Documentation/gpu/drm-kms-helpers:296: drivers/gpu/drm/display/drm_dp_mst_topology.c:5484: ERROR: Unexpected indentation.
Documentation/gpu/drm-kms-helpers:296: drivers/gpu/drm/display/drm_dp_mst_topology.c:5488: WARNING: Block quote ends without a blank line; unexpected unindent.
Separate @failing_port return value list by surrounding it with a
blank line to fix above warnings.
Fixes: 1cd0a5ea427931 ("drm/dp_mst: Factor out a helper to check the atomic state of a topology manager")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20231114141715.6f435118@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114081033.27343-1-bagasdotme@gmail.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Similar to commit 26db46bc9c67 ("drm/bridge: parade-ps8640: Ensure bridge
is suspended in .post_disable()"). Add a mutex to ensure that aux transfer
won't race with atomic_disable by holding the PM reference and prevent
the bridge from suspend.
Also we need to use pm_runtime_put_sync_suspend() to suspend the bridge
instead of idle with pm_runtime_put_sync().
Fixes: 3203e497eb76 ("drm/bridge: anx7625: Synchronously run runtime suspend.")
Fixes: adca62ec370c ("drm/bridge: anx7625: Support reading edid through aux channel")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118015916.2296741-1-hsinyi@chromium.org
|
|
Commit 1a721de8489f ("block: don't add or resize partition on the disk
with GENHD_FL_NO_PART") prevented all operations about partitions on disks
with GENHD_FL_NO_PART in blkpg_do_ioctl() since they are meaningless.
However, it changed error code in some scenarios. So move checking
GENHD_FL_NO_PART to bdev_add_partition() to eliminate impact.
Fixes: 1a721de8489f ("block: don't add or resize partition on the disk with GENHD_FL_NO_PART")
Reported-by: Allison Karlitskaya <allison.karlitskaya@redhat.com>
Closes: https://lore.kernel.org/all/CAOYeF9VsmqKMcQjo1k6YkGNujwN-nzfxY17N3F-CMikE1tYp+w@mail.gmail.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240118130401.792757-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix spelling mistakes as reported by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Krzysztof Hałasa <khalasa@piap.pl>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Drop a debug print in media_release(), which is a release callback for a
file handle. Printing a debug message here is simply not necessary.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add relevant debug prints for v4l2_fwnode_create_links_for_pad(). This
should help debugging when things go wrong.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use v4l2_create_fwnode_links_to_pad() to create links from async
sub-devices to the CSI-2 receiver subdevs.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The imgu driver fails to probe with the following message because it
does not set the pad's flags before calling media_entity_pads_init().
[ 14.596315] ipu3-imgu 0000:00:05.0: failed initialize subdev media entity (-22)
[ 14.596322] ipu3-imgu 0000:00:05.0: failed to register subdev0 ret (-22)
[ 14.596327] ipu3-imgu 0000:00:05.0: failed to register pipes (-22)
[ 14.596331] ipu3-imgu 0000:00:05.0: failed to create V4L2 devices (-22)
Fix the initialization order so that the driver probe succeeds. The ops
initialization is also moved together for readability.
Fixes: a0ca1627b450 ("media: staging/intel-ipu3: Add v4l2 driver based on media framework")
Cc: <stable@vger.kernel.org> # 6.7
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hidenori Kobayashi <hidenorik@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add enum_mbus_code ioctl so that user space can know what
formats are supported to csi2rx.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Tested-by: Jai Luthra <j-luthra@ti.com> # [Test on sk-am62a]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Remove the @major: and @minor: lines to prevent the kernel-doc warnings:
include/media/media-entity.h:376: warning: Excess struct member 'major' description in 'media_entity'
include/media/media-entity.h:376: warning: Excess struct member 'minor' description in 'media_entity'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use proper indentation for Kconfig fragments - help part.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
There is a spelling mistake in a dev_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add support for RGB565, RGB888 and BGR888 media bus formats.
The pixel formats for these have a different byte-order than the MIPI
bus formats, given the SHIM IP [1] unpacks them into memory as follows:
MIPI RGB888 unpacks to:
BYTE3 BYTE2 BYTE1 BYTE0
00000000 RRRRRRRR GGGGGGGG BBBBBBBB
MIPI RGB565 unpacks to:
BIT 15-11 BIT 10-5 BIT 4-0
RRRRR GGGGGG BBBBB
[1]: AM62x TRM: 12.6.1.4.5 "CSI_RX_IF Data Memory Organization Details"
Link: https://www.ti.com/lit/pdf/spruiv7
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add support for RGB565, RGB888 and BGR888 media bus formats.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add Grey format to properly select RAW8 data type.
Tested with a ST VG5661 sensor.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Acked-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add support for MEDIA_BUS_FMT_Y8_1X8 format.
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Acked-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Since commit 1029939b3782 ("media: v4l: async: Simplify async sub-device fwnode matching"),
async connections are matched using the async sub-device fwnode, not that
of the endpoint. Fix this by using the fwnode of the connection match to
find the pad.
Fixes: 1029939b3782 ("media: v4l: async: Simplify async sub-device fwnode matching")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Remove kerneldoc entries for struct members that do not exist, fixing these
warnings:
./drivers/staging/media/ipu3/include/uapi/intel-ipu3.h:2522: warning: Excess struct member 'reserved1' description in 'ipu3_uapi_acc_param'
./drivers/staging/media/ipu3/include/uapi/intel-ipu3.h:2522: warning: Excess struct member 'reserved2' description in 'ipu3_uapi_acc_param'
./drivers/staging/media/ipu3/include/uapi/intel-ipu3.h:2778: warning: Excess struct member '__acc_osys' description in 'ipu3_uapi_flags'
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This adds the PCI ID of the Arrow Lake and Meteor Lake-S PCH SPI serial
flash controller. This one supports all the necessary commands Linux
SPI-NOR stack requires.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://msgid.link/r/20240122120034.2664812-3-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Turns out this "SoC" side controller does not support certain commands,
such as reading chip JEDEC ID, so the controller is pretty much unusable
in Linux. We should be using the "PCH" side controller instead. For this
reason remove this PCI ID from the list.
Fixes: c2912d42e86e ("spi: intel-pci: Add support for Meteor Lake-S SPI serial flash")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://msgid.link/r/20240122120034.2664812-2-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Several inlined functions subject to paravirt patching are referencing
BUG_func() after the recent switch to the alternative patching
mechanism.
As those functions can legally be used by non-GPL modules, BUG_func()
must be usable by those modules, too. So use EXPORT_SYMBOL() when
exporting BUG_func().
Fixes: 9824b00c2b58 ("x86/paravirt: Move some functions and defines to alternative.c")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240109082232.22657-1-jgross@suse.com
|
|
Add Jeff Layton as a reviewer in the MAINTAINERS file.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240122115007.3820330-3-dhowells@redhat.com
Acked-by: Jeff Layton <jlayton@kernel.org>
cc: <netfs@lists.linux.dev>
cc: <linux-fsdevel@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The publicly accessible archives for Red Hat mailing lists stop at Oct
2023; messages sent after that time are in internal-only archives.
Change the netfs and cachefiles mailing list to one that has publicly
accessible archives:
netfs@lists.linux.dev
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240122115007.3820330-2-dhowells@redhat.com
cc: Jeff Layton <jlayton@kernel.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: <netfs@lists.linux.dev>
cc: <linux-cachefs@redhat.com>
cc: <v9fs@lists.linux.dev>
cc: <linux-afs@lists.infradead.org>
cc: <ceph-devel@vger.kernel.org>
cc: <linux-cifs@vger.kernel.org>
cc: <linux-erofs@lists.ozlabs.org>
cc: <linux-nfs@vger.kernel.org>
cc: <linux-fsdevel@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
On systems using HWP, if a given frequency is equal to the maximum turbo
frequency or the maximum non-turbo frequency, the HWP performance level
corresponding to it is already known and can be used directly without
any computation.
Accordingly, adjust the code to use the known HWP performance levels in
the cases mentioned above.
This also helps to avoid limiting CPU capacity artificially in some
cases when the BIOS produces the HWP_CAP numbers using a different
E-core-to-P-core performance scaling factor than expected by the kernel.
Fixes: f5c8cf2a4992 ("cpufreq: intel_pstate: hybrid: Use known scaling factor for P-cores")
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
IP reset has to followed by ivpu_pll_disable() to properly enter
reset state.
Fixes: 828d63042aec ("accel/ivpu: Don't enter d0i3 during FLR")
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024165353.761507-1-stanislaw.gruszka@linux.intel.com
|
|
Syzcaller UBSAN crash occurs in rds_cmsg_recv(),
which reads inc->i_rx_lat_trace[j + 1] with index 4 (3 + 1),
but with array size of 4 (RDS_RX_MAX_TRACES).
Here 'j' is assigned from rs->rs_rx_trace[i] and in-turn from
trace.rx_trace_pos[i] in rds_recv_track_latency(),
with both arrays sized 3 (RDS_MSG_RX_DGRAM_TRACE_MAX). So fix the
off-by-one bounds check in rds_recv_track_latency() to prevent
a potential crash in rds_cmsg_recv().
Found by syzcaller:
=================================================================
UBSAN: array-index-out-of-bounds in net/rds/recv.c:585:39
index 4 is out of range for type 'u64 [4]'
CPU: 1 PID: 8058 Comm: syz-executor228 Not tainted 6.6.0-gd2f51b3516da #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x136/0x150 lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:217 [inline]
__ubsan_handle_out_of_bounds+0xd5/0x130 lib/ubsan.c:348
rds_cmsg_recv+0x60d/0x700 net/rds/recv.c:585
rds_recvmsg+0x3fb/0x1610 net/rds/recv.c:716
sock_recvmsg_nosec net/socket.c:1044 [inline]
sock_recvmsg+0xe2/0x160 net/socket.c:1066
__sys_recvfrom+0x1b6/0x2f0 net/socket.c:2246
__do_sys_recvfrom net/socket.c:2264 [inline]
__se_sys_recvfrom net/socket.c:2260 [inline]
__x64_sys_recvfrom+0xe0/0x1b0 net/socket.c:2260
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
==================================================================
Fixes: 3289025aedc0 ("RDS: add receive message trace used by application")
Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Closes: https://lore.kernel.org/linux-rdma/CALGdzuoVdq-wtQ4Az9iottBqC5cv9ZhcE5q8N7LfYFvkRsOVcw@mail.gmail.com/
Signed-off-by: Sharath Srinivasan <sharath.srinivasan@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The event selector fields for 2 counters are contained in one
32-bit register and the current logic does not account for this.
Fixes: 423c3361855c ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/8834cfa496c97c7c2fcebcfca5a2aa007e20ae96.1705485095.git.shravankr@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Starting from Linux 5.16 kernel, Tx timeout mechanism was added
in the virtio_net driver which prints the "Tx timeout" warning
message when a packet stays in Tx queue for too long. Below is an
example of the reported message:
"[494105.316739] virtio_net virtio1 tmfifo_net0: TX timeout on
queue: 0, sq: output.0, vq: 0×1, name: output.0, usecs since
last trans: 3079892256".
This issue could happen when external host driver which drains the
FIFO is restared, stopped or upgraded. To avoid such confusing
"Tx timeout" messages, this commit adds logic to drop the outstanding
Tx packet if it's not able to transmit in two seconds due to Tx FIFO
full, which can be considered as congestion or out-of-resource drop.
This commit also handles the special case that the packet is half-
transmitted into the Tx FIFO. In such case, the packet is discarded
with remaining length stored in vring->rem_padding. So paddings with
zeros can be sent out when Tx space is available to maintain the
integrity of the packet format. The padded packet will be dropped on
the receiving side.
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240111173106.96958-1-limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Change the interface of power management functions in s5p_mfc_pm.c to
accept the pointer to S5P MFC device structure. instead of relying on
file-scope static variable. This makes code easier to read and modify
in case more devices are added.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Pointer "struct s5p_mfc_dev" is stored in s5p_mfc_pm.c once and never
used again.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Drop useless debugging of clock enabl/disable counts, because core
handles this much better.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Constify the local variables pointing to "struct s5p_mfc_enc_params" and
other encoding params to annotate the function is not modifying pointed
data.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
In few places functions do not modify pointed "struct
s5p_mfc_cmd_args", thus the pointer can point to const data for
additional safety and self-documenting intention of the function.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Static "struct" structures are not modified by the driver, so
they can be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Static "s5p_mfc_fmt" structures are not modified by the driver, so
they can be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Static "s5p_mfc_hw_ops" structures are not modified by the driver, so
they can be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Static "s5p_mfc_hw_cmds" structures are not modified by the driver, so
they can be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Static "s5p_mfc_variant" structures are not modified by the driver, so
they can be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Static "s5p_mfc_buf_size*" structures are not modified by the driver, so
they can be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Constify stored pointers to firmware names for code safety. These are
not modified by the driver.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
get_dec_def_fmt() and get_enc_def_fmt() do not have definitions, so
their declarations are pointless.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
File-scope static variable "s5p_mfc_ops" is not read after assignment,
thus it can be dropped entirely.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
