summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-09-28wl1271: remove useless 11a check when scanningLuciano Coelho
This code was a leftover of the previous scanning mechanism. The if is totally unnecessary, since both branches do the same thing. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
2010-09-28wl1271: Fix scan race conditionJuuso Oikarinen
In the scan state machine, the wl1271_mutex is unlocked first then relocked, and then the scan state variables are modified. This makes it possible for ieee80211_scan_complete to be called twice in some scenarios, as the scan completion event from the firmware may be processed while the mutex is unlocked. To fix the issue, move the ieee80211_scan_complete call last in the function. This is generally safer, but there still may be issues is functions calling the scan state machine rely on states checked before the unlocking of the global mutex. (forward ported from 2.6.32 -- this is not strictly needed anymore, because the mutex doesn't need to be unlocked anymore, but I'm applying this change anyway, so that the call to ieee80211_scan_complete is in the same place) Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-09-28wl1271: Add trigger to net_device oper_state to change BT coex priorityJuuso Oikarinen
Add a trigger to net_device changes to monitor for oper_state changes in order to be able to inform the firmware when association is fully complete (including the EAP negotiation.) Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-09-28wl1271: Implement CMD_SET_STA_STATE to indicate connection completion to FWJuuso Oikarinen
Implement the command function to send CMD_SET_STA_STATE to the firmware. This is used to indicate that association (and the related EAP negotiation) are complete. This is used to tune WLAN-BT coexistense priority towards BT, improving BT A2DP and SCO performance. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-09-28wl1271: remove deprecated ACX definitionLuciano Coelho
As of Rev. 6.1.0.0.335, the ACX_SET_SMART_REFLEX_DEBUG command is deprecated. This patch removes it from the wl1271 driver (it wasn't used anyway). Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com>
2010-09-27Documentation: Update Phonet doc for Pipe Controller implementationKumar Sanghvi
Updates the Phonet document with description related to Pipe controller implementation Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27tg3: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-278021q: Use netif_copy_real_num_queues() to set queue countsBen Hutchings
This covers RX if necessary, as well as TX. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27sfc: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27niu: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27myri10ge: Use netif_set_real_num_{rx, tx}_queues()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27mv643xx_eth: Use netif_set_real_num_{rx, tx}_queues()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27mlx4_en: Use netif_set_real_num_{rx, tx}_queues()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27ixgbe: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27igb: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27gianfar: Use netif_set_real_num_rx_queues()Ben Hutchings
Do not set num_tx_queues or real_num_tx_queues, since alloc_etherdev_mq() does that. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27cxgb4vf: Use netif_set_real_num_{rx, tx}_queues()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27cxgb4: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27cxgb3: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27bnx2x: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27bnx2: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27net: Add netif_copy_real_num_queues() for use by virtual net driversBen Hutchings
This sets the active numbers of queues on a net device to match another. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27net: Allow changing number of RX queues after device allocationBen Hutchings
For RPS, we create a kobject for each RX queue based on the number of queues passed to alloc_netdev_mq(). However, drivers generally do not determine the numbers of hardware queues to use until much later, so this usually represents the maximum number the driver may use and not the actual number in use. For TX queues, drivers can update the actual number using netif_set_real_num_tx_queues(). Add a corresponding function for RX queues, netif_set_real_num_rx_queues(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27net: sk_{detach|attach}_filter() rcu fixesEric Dumazet
sk_attach_filter() and sk_detach_filter() are run with socket locked. Use the appropriate rcu_dereference_protected() instead of blocking BH, and rcu_dereference_bh(). There is no point adding BH prevention and memory barrier. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27fib: use atomic_inc_not_zero() in fib_rules_lookupEric Dumazet
It seems we dont use appropriate refcount increment in an rcu_read_lock() protected section. fib_rule_get() might increment a null refcount and bad things could happen. While fib_nl_delrule() respects an rcu grace period before calling fib_rule_put(), fib_rules_cleanup_ops() calls fib_rule_put() without a grace period. Note : after this patch, we might avoid the synchronize_rcu() call done in fib_nl_delrule() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27sit: percpu stats accountingEric Dumazet
Maintain per_cpu tx_bytes, tx_packets, rx_bytes, rx_packets. Other seldom used fields are kept in netdev->stats structure, possibly unsafe. This is a preliminary work to support lockless transmit path, and correct RX stats, that are already unsafe. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27ipip: percpu stats accountingEric Dumazet
Maintain per_cpu tx_bytes, tx_packets, rx_bytes, rx_packets. Other seldom used fields are kept in netdev->stats structure, possibly unsafe. This is a preliminary work to support lockless transmit path, and correct RX stats, that are already unsafe. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27ip_gre: percpu stats accountingEric Dumazet
Le lundi 27 septembre 2010 à 14:29 +0100, Ben Hutchings a écrit : > > diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c > > index 5d6ddcb..de39b22 100644 > > --- a/net/ipv4/ip_gre.c > > +++ b/net/ipv4/ip_gre.c > [...] > > @@ -377,7 +405,7 @@ static struct ip_tunnel *ipgre_tunnel_locate(struct net *net, > > if (parms->name[0]) > > strlcpy(name, parms->name, IFNAMSIZ); > > else > > - sprintf(name, "gre%%d"); > > + strcpy(name, "gre%d"); > > > > dev = alloc_netdev(sizeof(*t), name, ipgre_tunnel_setup); > > if (!dev) > [...] > > This is a valid fix, but doesn't belong in this patch! > Sorry ? It was not a fix, but at most a cleanup ;) Anyway I forgot the gretap case... [PATCH 2/4 v2] ip_gre: percpu stats accounting Maintain per_cpu tx_bytes, tx_packets, rx_bytes, rx_packets. Other seldom used fields are kept in netdev->stats structure, possibly unsafe. This is a preliminary work to support lockless transmit path, and correct RX stats, that are already unsafe. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27tunnels: prepare percpu accountingEric Dumazet
Tunnels are going to use percpu for their accounting. They are going to use a new tstats field in net_device. skb_tunnel_rx() is changed to be a wrapper around __skb_tunnel_rx() IPTUNNEL_XMIT() is changed to be a wrapper around __IPTUNNEL_XMIT() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27vlan: use this_cpu_ptr() in vlan_skb_recv()Eric Dumazet
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27Phonet: Implement Pipe Controller to support Nokia Slim ModemsKumar Sanghvi
Phonet stack assumes the presence of Pipe Controller, either in Modem or on Application Processing Engine user-space for the Pipe data. Nokia Slim Modems like WG2.5 used in ST-Ericsson U8500 platform do not implement Pipe controller in them. This patch adds Pipe Controller implemenation to Phonet stack to support Pipe data over Phonet stack for Nokia Slim Modems. Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27Merge branch 'x86/urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Avoid 'constant_test_bit()' misoptimization due to cast to non-volatile
2010-09-27tcp: Fix >4GB writes on 64-bit.David S. Miller
Fixes kernel bugzilla #16603 tcp_sendmsg() truncates iov_len to an 'int' which a 4GB write to write zero bytes, for example. There is also the problem higher up of how verify_iovec() works. It wants to prevent the total length from looking like an error return value. However it does this using 'int', but syscalls return 'long' (and thus signed 64-bit on 64-bit machines). So it could trigger false-positives on 64-bit as written. So fix it to use 'long'. Reported-by: Olaf Bonorden <bono@onlinehome.de> Reported-by: Daniel Büse <dbuese@gmx.de> Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27Fix pktcdvd ioctl dev_minor range checkDan Rosenberg
The PKT_CTRL_CMD_STATUS device ioctl retrieves a pointer to a pktcdvd_device from the global pkt_devs array. The index into this array is provided directly by the user and is a signed integer, so the comparison to ensure that it falls within the bounds of this array will fail when provided with a negative index. This can be used to read arbitrary kernel memory or cause a crash due to an invalid pointer dereference. This can be exploited by users with permission to open /dev/pktcdvd/control (on many distributions, this is readable by group "cdrom"). Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> [ Rather than add a cast, just make the function take the right type -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-27MN10300: Default config choice GDBSTUB_TTYSM0 should be GDBSTUB_ON_TTYSM0David Howells
The configuration choice for the port on which the GDB stub listens has a default of GDBSTUB_TTYSM0, but this should be GDBSTUB_ON_TTYSM0 to match the option. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-28drm/radeon/kms: add quirk for MSI K9A2GM motherboardAlex Deucher
Board has no digital connectors Reported-by: Andy Walls <awalls@md.metrocast.net> Tested-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-28drm/radeon/kms: fix potential segfault in r600_ioctl_wait_idleAlex Deucher
radeon_gem_wait_idle_ioctl can apparently get called prior to the vram page being set up or even if accel if false, so make sure it's valid before using it. Should fix: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=597636 https://bugs.freedesktop.org/show_bug.cgi?id=29834 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-28drm: Prune GEM vma entriesChris Wilson
Hook the GEM vm open/close ops into the generic drm vm open/close so that the private vma entries are created and destroy appropriately. Fixes the leak of the drm_vma_entries during the lifetime of the filp. Reported-by: Matt Mackall <mpm@selenic.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-28i2c-davinci: Fix race when setting up for TXJon Povey
When setting up to transmit, a race exists between the ISR and i2c_davinci_xfer_msg() trying to load the first byte and adjust counters. This is mostly visible for transmits > 1 byte long. The hardware starts sending immediately that MDR is loaded. IMR trickery doesn't work because if we start sending, finish the first byte and an XRDY event occurs before we load IMR to unmask it, we never get an interrupt, and we timeout. Move the MDR load after DXR,IMR loads to avoid this race without locking. Tested on DM355 connected to Techwell TW2836 and Wolfson WM8985 Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-09-27net/9p: Mount only matching virtio channelsSven Eckelmann
p9_virtio_create will only compare the the channel's tag characters against the device name till the end of the channel's tag but not till the end of the device name. This means that if a user defines channels with the tags foo and foobar then he would mount foo when he requested foonot and may mount foo when he requested foobar. Thus it is necessary to check both string lengths against each other in case of a successful partial string match. Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27de2104x: fix ethtoolOndrej Zary
When the interface is up, using ethtool breaks it because: a) link is put down but media_timer interval is not shortened to NO_LINK b) rxtx is stopped but not restarted Also manual 10baseT-HD (and probably FD too - untested) mode does not work - the link is forced up, packets are transmitted but nothing is received. Changing CSR14 value to match documentation (not disabling link check) fixes this. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27i2c-octeon: Return -ETIMEDOUT in octeon_i2c_wait() on timeoutBernhard Walle
It doesn't make sense to set result to -ETIMEDOUT but return 0 (success) afterwards. Since there's code in octeon_i2c_start() to handle the error, it should be called. Signed-off-by: Bernhard Walle <walle@corscience.de> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-09-27Merge branch 'vhost-net' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-09-27tproxy: check for transparent flag in ip_route_newportsUlrich Weber
as done in ip_route_connect() Signed-off-by: Ulrich Weber <uweber@astaro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27ipv6: add IPv6 to neighbour table overflow warningUlrich Weber
IPv4 and IPv6 have separate neighbour tables, so the warning messages should be distinguishable. [ Add a suitable message prefix on the ipv4 side as well -DaveM ] Signed-off-by: Ulrich Weber <uweber@astaro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27tcp: fix TSO FACK loss marking in tcp_mark_head_lostYuchung Cheng
When TCP uses FACK algorithm to mark lost packets in tcp_mark_head_lost(), if the number of packets in the (TSO) skb is greater than the number of packets that should be marked lost, TCP incorrectly exits the loop and marks no packets lost in the skb. This underestimates tp->lost_out and affects the recovery/retransmission. This patch fargments the skb and marks the correct amount of packets lost. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27ath9k_htc: Fix TKIP disconnect failure with HTC driversRajkumar Manoharan
The following commit removed splitmic. But forgot to add ATH_CRYPT_CAP_MIC_COMBINED flag for HTC drivers which causes TKIP to fail. Author: Bruno Randolf <br1@einfach.org> Date: Wed Sep 8 16:04:54 2010 +0900 ath/ath9k: Replace common->splitmic with a flag Replace common->splitmic with ATH_CRYPT_CAP_MIC_COMBINED flag. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-27mac80211: move packet flags into packetJohannes Berg
commit 8c0c709eea5cbab97fb464cd68b06f24acc58ee1 Author: Johannes Berg <johannes@sipsolutions.net> Date: Wed Nov 25 17:46:15 2009 +0100 mac80211: move cmntr flag out of rx flags moved the CMNTR flag into the skb RX flags for some aggregation cleanups, but this was wrong since the optimisation this flag tried to make requires that it is kept across the processing of multiple interfaces -- which isn't true for flags in the skb. The patch not only broke the optimisation, it also introduced a bug: under some (common!) circumstances the flag will be set on an already freed skb! However, investigating this in more detail, I found that most of the flags that we set should be per packet, _except_ for this one, due to a-MPDU processing. Additionally, the flags used for processing (currently just this one) need to be reset before processing a new packet. Since we haven't actually seen bugs reported as a result of the wrong flags handling (which is not too surprising -- the only real bug case I can come up with is an a-MSDU contained in an a-MPDU), I'll make a different fix for rc. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-27mac80211: fix release_reorder_timeout in scanJohannes Berg
Even if the reorder timeout timer fires while scanning, the frames weren't received during scanning and therefore shouldn't be dropped. To implement this, changes to the passive scan RX handler simplify understanding it, because it currently checks HW_SCANNING independently of a packet's in-scan receive status (which doesn't make a big difference, since scan_rx() will only pick up probe responses and beacons, which can't be aggregated.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-27mac80211: clean up rx handling wrt. found_staJohannes Berg
If a station was found, then we'll have exited the function already, so it is not necessary to have a variable keeping track of it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-30 13:51:58 +0000