| Age | Commit message (Collapse) | Author |
|---|
|
Lei Chen raised an issue with CLOCK_MONOTONIC_COARSE seeing time
inconsistencies.
Lei tracked down that this was being caused by the adjustment
tk->tkr_mono.xtime_nsec -= offset;
which is made to compensate for the unaccumulated cycles in offset when the
multiplicator is adjusted forward, so that the non-_COARSE clockids don't
see inconsistencies.
However, the _COARSE clockid getter functions use the adjusted xtime_nsec
value directly and do not compensate the negative offset via the
clocksource delta multiplied with the new multiplicator. In that case the
caller can observe time going backwards in consecutive calls.
By design, this negative adjustment should be fine, because the logic run
from timekeeping_adjust() is done after it accumulated approximately
multiplicator * interval_cycles
into xtime_nsec. The accumulated value is always larger then the
mult_adj * offset
value, which is subtracted from xtime_nsec. Both operations are done
together under the tk_core.lock, so the net change to xtime_nsec is always
always be positive.
However, do_adjtimex() calls into timekeeping_advance() as well, to to
apply the NTP frequency adjustment immediately. In this case,
timekeeping_advance() does not return early when the offset is smaller then
interval_cycles. In that case there is no time accumulated into
xtime_nsec. But the subsequent call into timekeeping_adjust(), which
modifies the multiplicator, subtracts from xtime_nsec to correct
for the new multiplicator.
Here because there was no accumulation, xtime_nsec becomes smaller than
before, which opens a window up to the next accumulation, where the _COARSE
clockid getters, which don't compensate for the offset, can observe the
inconsistency.
To fix this, rework the timekeeping_advance() logic so that when invoked
from do_adjtimex(), the time is immediately forwarded to accumulate also
the sub-interval portion into xtime. That means the remaining offset
becomes zero and the subsequent multiplier adjustment therefore does not
modify xtime_nsec.
There is another related inconsistency. If xtime is forwarded due to the
instantaneous multiplier adjustment, the NTP error, which was accumulated
with the previous setting, becomes meaningless.
Therefore clear the NTP error as well, after forwarding the clock for the
instantaneous multiplier update.
Fixes: da15cfdae033 ("time: Introduce CLOCK_REALTIME_COARSE")
Reported-by: Lei Chen <lei.chen@smartx.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250320200306.1712599-1-jstultz@google.com
Closes: https://lore.kernel.org/lkml/20250310030004.3705801-1-lei.chen@smartx.com/
|
|
When adding a socket option support in MPTCP, both the get and set parts
are supposed to be implemented.
IP(V6)_FREEBIND and IP(V6)_TRANSPARENT support for the setsockopt part
has been added a while ago, but it looks like the get part got
forgotten. It should have been present as a way to verify a setting has
been set as expected, and not to act differently from TCP or any other
socket types.
Everything was in place to expose it, just the last step was missing.
Only new code is added to cover these specific getsockopt(), that seems
safe.
Fixes: c9406a23c116 ("mptcp: sockopt: add SOL_IP freebind & transparent options")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-net-mptcp-fix-data-stream-corr-sockopt-v1-3-122dbb249db3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When adding a socket option support in MPTCP, both the get and set parts
are supposed to be implemented.
IPV6_V6ONLY support for the setsockopt part has been added a while ago,
but it looks like the get part got forgotten. It should have been
present as a way to verify a setting has been set as expected, and not
to act differently from TCP or any other socket types.
Not supporting this getsockopt(IPV6_V6ONLY) blocks some apps which want
to check the default value, before doing extra actions. On Linux, the
default value is 0, but this can be changed with the net.ipv6.bindv6only
sysctl knob. On Windows, it is set to 1 by default. So supporting the
get part, like for all other socket options, is important.
Everything was in place to expose it, just the last step was missing.
Only new code is added to cover this specific getsockopt(), that seems
safe.
Fixes: c9b95a135987 ("mptcp: support IPV6_V6ONLY setsockopt")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/550
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-net-mptcp-fix-data-stream-corr-sockopt-v1-2-122dbb249db3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Breno Leitao says:
====================
netconsole: Add support for userdata release
I am submitting a series of patches that introduce a new feature for the
netconsole subsystem, specifically the addition of the 'release' field
to the sysdata structure. This feature allows the kernel release/version
to be appended to the userdata dictionary in every message sent,
enhancing the information available for debugging and monitoring
purposes.
This complements the already supported release prepend feature, which
was added some time ago. The release prepend appends the release
information at the message header, which is not ideal for two reasons:
1) It is difficult to determine if a message includes this information,
making it hard and resource-intensive to parse.
2) When a message is fragmented, the release information is appended to
every message fragment, consuming valuable space in the packet.
The "release prepend" feature was created before the concept of userdata
and sysdata. Now that this format has proven successful, we are
implementing the release feature as part of this enhanced structure.
This patch series aims to improve the netconsole subsystem by providing
a more efficient and user-friendly way to include kernel release
information in messages. I believe these changes will significantly aid
in system analysis and troubleshooting.
Suggested-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
====================
Link: https://patch.msgid.link/20250314-netcons_release-v1-0-07979c4b86af@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add documentation explaining the kernel release auto-population feature
in netconsole.
This feature appends kernel version information to the userdata
dictionary in every message sent when enabled via the `release_enabled`
file in the configfs hierarchy.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-netcons_release-v1-6-07979c4b86af@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Expands the self-tests to include the 'release' feature in
sysdata.
Verifies that enabling the 'release' feature appends the
correct data and ensures that disabling it functions as expected.
When enabled, the message should have an item similar to in the
userdata: `release=$(uname -r)`
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-netcons_release-v1-5-07979c4b86af@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Append the init_utsname()->release to sysdata buffer before sending the
message in case the feature is set.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-netcons_release-v1-4-07979c4b86af@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This commit appends a common "sysdata" suffix to functions responsible
for appending data to sysdata.
This change enhances code clarity and prevents naming conflicts with
other "append" functions, particularly in anticipation of the upcoming
inclusion of the `release` field in the next patch.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-netcons_release-v1-3-07979c4b86af@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implement the configfs helpers to show and set release_enabled configfs
directories under userdata.
When enabled, set the feature bit in netconsole_target->sysdata_fields.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-netcons_release-v1-2-07979c4b86af@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This commit adds a new feature to the sysdata structure, allowing the
kernel release/version to be appended as part of sysdata. Additionally,
it updates the logic to count this new field as a used entry when
enabled.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-netcons_release-v1-1-07979c4b86af@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The #if check causes a build failure when CONFIG_DEBUG_FS is turned
off:
In file included from drivers/net/ethernet/airoha/airoha_eth.c:17:
drivers/net/ethernet/airoha/airoha_eth.h:543:5: error: "CONFIG_DEBUG_FS" is not defined, evaluates to 0 [-Werror=undef]
543 | #if CONFIG_DEBUG_FS
| ^~~~~~~~~~~~~~~
Replace it with the correct #ifdef.
Fixes: 3fe15c640f38 ("net: airoha: Introduce PPE debugfs support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250314155009.4114308-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull io_uring fix from Jens Axboe:
"Single fix heading to stable, fixing an issue with io_req_msg_cleanup()
sometimes too eagerly clearing cleanup flags"
* tag 'io_uring-6.14-20250321' of git://git.kernel.dk/linux:
io_uring/net: don't clear REQ_F_NEED_CLEANUP unconditionally
|
|
The infamous mmap_lock taken in copy_from/to_user() can be often
problematic when it's called inside another mutex, as they might lead
to deadlocks.
In the case of ALSA timer code, the bad pattern is with
guard(mutex)(®ister_mutex) that covers copy_from/to_user() -- which
was mistakenly introduced at converting to guard(), and it had been
carefully worked around in the past.
This patch fixes those pieces simply by moving copy_from/to_user() out
of the register mutex lock again.
Fixes: 3923de04c817 ("ALSA: pcm: oss: Use guard() for setup")
Reported-by: syzbot+2b96f44164236dda0f3b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/67dd86c8.050a0220.25ae54.0059.GAE@google.com
Link: https://patch.msgid.link/20250321172653.14310-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Roopa has decided to withdraw as a bridge maintainer and Ido has agreed to
step up and co-maintain the bridge with me. He has been very helpful in
bridge patch reviews and has contributed a lot to the bridge over the
years. Add an entry for Roopa to CREDITS and also add bridge's headers
to its MAINTAINERS entry.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314100631.40999-1-razor@blackwall.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The void * cast in mctp_cb is unnecessary as it's already been done
at the start of the function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/Z9PwOQeBSYlgZlHq@gondor.apana.org.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Heiner Kallweit says:
====================
net: phy: remove calls to devm_hwmon_sanitize_name
Since c909e68f8127 ("hwmon: (core) Use device name as a fallback in
devm_hwmon_device_register_with_info") we can simply provide NULL
as name argument.
====================
Link: https://patch.msgid.link/198f3cd0-6c39-4783-afe7-95576a4b8539@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since c909e68f8127 ("hwmon: (core) Use device name as a fallback in
devm_hwmon_device_register_with_info") we can simply provide NULL
as name argument.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/59c485e4-983c-42f6-9114-916703a62e3f@gmail.com
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since c909e68f8127 ("hwmon: (core) Use device name as a fallback in
devm_hwmon_device_register_with_info") we can simply provide NULL
as name argument.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/e34c4802-20ce-4556-a47c-812e602e8526@gmail.com
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since c909e68f8127 ("hwmon: (core) Use device name as a fallback in
devm_hwmon_device_register_with_info") we can simply provide NULL
as name argument.
Note that neither priv->hwmon_name nor priv->hwmon_dev are used
outside tja11xx_hwmon_register.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/4452cb7e-1a2f-4213-b49f-9de196be9204@gmail.com
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since c909e68f8127 ("hwmon: (core) Use device name as a fallback in
devm_hwmon_device_register_with_info") we can simply provide NULL
as name argument.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/6e8d26f4-8d0a-4c83-aec3-378847a377eb@gmail.com
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This one is hilariously outdated, it provided a faster downlink over
TV cable for users of analog modems in the 1990s, through an ISA card.
The web page for the userspace tools has been broken for 25 years, and
the driver has only ever seen mechanical updates.
Link: http://web.archive.org/web/20000611165545/http://home.adelphia.net:80/~siglercm/sb1000.html
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312085236.2531870-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-14-a43967e36c88@linux.microsoft.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-15-a43967e36c88@linux.microsoft.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf events fixes from Ingo Molnar:
"Two fixes: an RAPL PMU driver error handling fix, and an AMD IBS
software filter fix"
* tag 'perf-urgent-2025-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/rapl: Fix error handling in init_rapl_pmus()
perf/x86: Check data address for IBS software filter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Revert a scheduler performance optimization that regressed other
workloads"
* tag 'sched-urgent-2025-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "sched/core: Reduce cost of sched_move_task when config autogroup"
|
|
irq_domain_add_linear() is going away as being obsolete now. Switch to
the preferred irq_domain_create_linear(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. The first parameter is NULL here so nothing else needs to
be done.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250319092951.37667-32-jirislaby@kernel.org
[ij: Removed unnecessary details from the commit message.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
mipi-sdca-ge-selectedmode-controls-affected is actually required by the
specification so the code should return an error if it is missing.
Reported-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Fixes: 13fe7497af19 ("ASoC: SDCA: Add support for GE Entity properties")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250321135324.380237-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update Quirk data for new Lenovo model 83J2 for YC platform.
Signed-off-by: Syed Saba kareem <syed.sabakareem@amd.com>
Link: https://patch.msgid.link/20250321122507.190193-1-syed.sabakareem@amd.com
Reported-by: Reiner <Reiner.Proels@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219887
Tested-by: Reiner <Reiner.Proels@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.14-rc8
amd-mp2: fix double free of irq.
|
|
There should be no blank line between the YAML opening header and the
schema '$id'.
Reported-by: Florin Leotescu (OSS) <florin.leotescu@oss.nxp.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250321080212.18013-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
When load this mode, we can see the following log:
"power_meter ACPI000D:00: hwmon_device_register() is deprecated. Please
convert the driver to use hwmon_device_register_with_info()."
So replace hwmon_device_register with hwmon_device_register_with_info.
These attributes, 'power_accuracy', 'power_cap_hyst', 'power_average_min'
and 'power_average_max', should have been placed in hwmon_chip_info as
power data type. But these attributes are displayed as string format on
the following case:
a) power1_accuracy --> display like '90.0%'
b) power1_cap_hyst --> display 'unknown' when its value is 0xFFFFFFFF
c) power1_average_min/max --> display 'unknown' when its value is
negative.
To avoid any changes in the display of these sysfs interfaces, we can't
modifiy the type of these attributes in hwmon core and have to put them
to extra_groups.
Please note that the path of these sysfs interfaces are modified
accordingly if use hwmon_device_register_with_info():
old: all sysfs interfaces are under acpi device, namely,
/sys/class/hwmon/hwmonX/device/
now: all sysfs interfaces are under hwmon device, namely,
/sys/class/hwmon/hwmonX/
The new ABI does not guarantee that the underlying path remains the same.
But we have to accept this change so as to replace the deprecated API.
Fortunately, some userspace application, like libsensors, would scan
the two path and handles this automatically. So we can accept this change
so as to drop the deprecated message.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20250319020638.59925-1-lihuisong@huawei.com
[groeck: Fixed some multi-line alignment issues;
reverted to 32-bit arithmetic in power1_accuracy_show()
fixed bad return code from power_meter_is_visible()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.14
A couple of small fixes, plus some new device IDs - nothing super urgent
here.
|
|
More HP EliteBook with Realtek HDA codec ALC3247 with combined CS35L56
Amplifiers need quirk ALC236_FIXUP_HP_GPIO_LED to fix the micmute LED.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250321104914.544233-2-chris.chiu@canonical.com
|
|
More HP laptops with Realtek HDA codec ALC3315 with combined CS35L56
Amplifiers need quirk ALC285_FIXUP_HP_GPIO_LED to fix the micmute LED.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250321104914.544233-1-chris.chiu@canonical.com
|
|
Commit 673ce00c5d6c ("ARM: omap2plus_defconfig: Add support for distros
with systemd") said it's because of recommendation from systemd. But
systemd changed their recommendation later.[1]
For cgroup v1, if turned on, and there's any cgroup in the "cpu" hierarchy it
needs an RT budget assigned, otherwise the processes in it will not be able to
get RT at all. The problem with RT group scheduling is that it requires the
budget assigned but there's no way we could assign a default budget, since the
values to assign are both upper and lower time limits, are absolute, and need to
be sum up to < 1 for each individal cgroup. That means we cannot really come up
with values that would work by default in the general case.[2]
For cgroup v2, it's almost unusable as well. If it turned on, the cpu controller
can only be enabled when all RT processes are in the root cgroup. But it will
lose the benefits of cgroup v2 if all RT process were placed in the same cgroup.
Red Hat, Gentoo, Arch Linux and Debian all disable it. systemd also doesn't
support it.
[1]: https://github.com/systemd/systemd/commit/f4e74be1856b3ac058acbf1be321c31d5299f69f
[2]: https://bugzilla.redhat.com/show_bug.cgi?id=1229700
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Celeste Liu <uwu@coelacanthus.name>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Potentially include errata for Landlock ABI v5 (Linux 6.10) and v6
(Linux 6.12). That will be useful for the following signal scoping
erratum.
As explained in errata.h, this commit should be backportable without
conflict down to ABI v5. It must then not include the errata/abi-6.h
file.
Fixes: 54a6e6bbf3be ("landlock: Add signal scoping")
Cc: Günther Noack <gnoack@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318161443.279194-5-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Add erratum for the TCP socket identification fixed with commit
854277e2cc8c ("landlock: Fix non-TCP sockets restriction").
Fixes: 854277e2cc8c ("landlock: Fix non-TCP sockets restriction")
Cc: Günther Noack <gnoack@google.com>
Cc: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318161443.279194-4-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Some fixes may require user space to check if they are applied on the
running kernel before using a specific feature. For instance, this
applies when a restriction was previously too restrictive and is now
getting relaxed (e.g. for compatibility reasons). However, non-visible
changes for legitimate use (e.g. security fixes) do not require an
erratum.
Because fixes are backported down to a specific Landlock ABI, we need a
way to avoid cherry-pick conflicts. The solution is to only update a
file related to the lower ABI impacted by this issue. All the ABI files
are then used to create a bitmask of fixes.
The new errata interface is similar to the one used to get the supported
Landlock ABI version, but it returns a bitmask instead because the order
of fixes may not match the order of versions, and not all fixes may
apply to all versions.
The actual errata will come with dedicated commits. The description is
not actually used in the code but serves as documentation.
Create the landlock_abi_version symbol and use its value to check errata
consistency.
Update test_base's create_ruleset_checks_ordering tests and add errata
tests.
This commit is backportable down to the first version of Landlock.
Fixes: 3532b0b4352c ("landlock: Enable user space to infer supported features")
Cc: Günther Noack <gnoack@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318161443.279194-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
To ease backports in setup.c, let's group changes from
__lsm_ro_after_init to __ro_after_init with commit f22f9aaf6c3d
("selinux: remove the runtime disable functionality"), and the
landlock_lsmid addition with commit f3b8788cde61 ("LSM: Identify modules
by more than name").
That will help to backport the following errata.
Cc: Günther Noack <gnoack@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318161443.279194-2-mic@digikod.net
Fixes: f3b8788cde61 ("LSM: Identify modules by more than name")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
In case the fib match is used from the input hook we can avoid the fib
lookup if early demux assigned a socket for us: check that the input
interface matches sk-cached one.
Rework the existing 'lo bypass' logic to first check sk, then
for loopback interface type to elide the fib lookup.
This speeds up fib matching a little, before:
93.08 GBit/s (no rules at all)
75.1 GBit/s ("fib saddr . iif oif missing drop" in prerouting)
75.62 GBit/s ("fib saddr . iif oif missing drop" in input)
After:
92.48 GBit/s (no rules at all)
75.62 GBit/s (fib rule in prerouting)
90.37 GBit/s (fib rule in input).
Numbers for the 'no rules' and 'prerouting' are expected to
closely match in-between runs, the 3rd/input test case exercises the
the 'avoid lookup if cached ifindex in sk matches' case.
Test used iperf3 via veth interface, lo can't be used due to existing
loopback test.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This change removes a redundant null check found by Smatch.
Fixes: 403a0293f1c2 ("mmc: core: Add open-ended Ext memory addressing")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-mmc/345be6cd-f2f3-472e-a897-ca4b7c4cf826@stanley.mountain/
Signed-off-by: Avri Altman <avri.altman@sandisk.com>
Link: https://lore.kernel.org/r/20250319203642.778016-1-avri.altman@sandisk.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Setting pci_msi_ignore_mask inhibits the toggling of the mask bit for both
MSI and MSI-X entries globally, regardless of the IRQ chip they are using.
Only Xen sets the pci_msi_ignore_mask when routing physical interrupts over
event channels, to prevent PCI code from attempting to toggle the maskbit,
as it's Xen that controls the bit.
However, the pci_msi_ignore_mask being global will affect devices that use
MSI interrupts but are not routing those interrupts over event channels
(not using the Xen pIRQ chip). One example is devices behind a VMD PCI
bridge. In that scenario the VMD bridge configures MSI(-X) using the
normal IRQ chip (the pIRQ one in the Xen case), and devices behind the
bridge configure the MSI entries using indexes into the VMD bridge MSI
table. The VMD bridge then demultiplexes such interrupts and delivers to
the destination device(s). Having pci_msi_ignore_mask set in that scenario
prevents (un)masking of MSI entries for devices behind the VMD bridge.
Move the signaling of no entry masking into the MSI domain flags, as that
allows setting it on a per-domain basis. Set it for the Xen MSI domain
that uses the pIRQ chip, while leaving it unset for the rest of the
cases.
Remove pci_msi_ignore_mask at once, since it was only used by Xen code, and
with Xen dropping usage the variable is unneeded.
This fixes using devices behind a VMD bridge on Xen PV hardware domains.
Albeit Devices behind a VMD bridge are not known to Xen, that doesn't mean
Linux cannot use them. By inhibiting the usage of
VMD_FEAT_CAN_BYPASS_MSI_REMAP and the removal of the pci_msi_ignore_mask
bodge devices behind a VMD bridge do work fine when use from a Linux Xen
hardware domain. That's the whole point of the series.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-ID: <20250219092059.90850-4-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
MSI remapping bypass (directly configuring MSI entries for devices on the
VMD bus) won't work under Xen, as Xen is not aware of devices in such bus,
and hence cannot configure the entries using the pIRQ interface in the PV
case, and in the PVH case traps won't be setup for MSI entries for such
devices.
Until Xen is aware of devices in the VMD bus prevent the
VMD_FEAT_CAN_BYPASS_MSI_REMAP capability from being used when running as
any kind of Xen guest.
The MSI remapping bypass is an optional feature of VMD bridges, and hence
when running under Xen it will be masked and devices will be forced to
redirect its interrupts from the VMD bridge. That mode of operation must
always be supported by VMD bridges and works when Xen is not aware of
devices behind the VMD bridge.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Message-ID: <20250219092059.90850-3-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
around compiler segfault
Due to pending percpu improvements in -next, GCC9 and GCC10 are
crashing during the build with:
lib/zstd/compress/huf_compress.c:1033:1: internal compiler error: Segmentation fault
1033 | {
| ^
Please submit a full bug report,
with preprocessed source if appropriate.
See <file:///usr/share/doc/gcc-9/README.Bugs> for instructions.
The DYNAMIC_BMI2 feature is a known-challenging feature of
the ZSTD library, with an existing GCC quirk turning it off
for GCC versions below 4.8.
Increase the DYNAMIC_BMI2 version cutoff to GCC 11.0 - GCC 10.5
is the last version known to crash.
Reported-by: Michael Kelley <mhklinux@outlook.com>
Debugged-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: https://lore.kernel.org/r/SN6PR02MB415723FBCD79365E8D72CA5FD4D82@SN6PR02MB4157.namprd02.prod.outlook.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Clang does not tolerate the use of non-TLS symbols for the per-CPU stack
protector very well, and to work around this limitation, the symbol
passed via the -mstack-protector-guard-symbol= option is never defined
in C code, but only in the linker script, and it is exported from an
assembly file. This is necessary because Clang will fail to generate the
correct %GS based references in a compilation unit that includes a
non-TLS definition of the guard symbol being used to store the stack
cookie.
This problem is only triggered by symbol definitions, not by
declarations, but nonetheless, the declaration in <asm/asm-prototypes.h>
is conditional on __GENKSYMS__ being #define'd, so that only genksyms
will observe it, but for ordinary compilation, it will be invisible.
This is causing problems with the genksyms alternative gendwarfksyms,
which does not #define __GENKSYMS__, does not observe the symbol
declaration, and therefore lacks the information it needs to version it.
Adding the #define creates problems in other places, so that is not a
straight-forward solution. So take the easy way out, and drop the
conditional on __GENKSYMS__, as this is not really needed to begin with.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250320213238.4451-2-ardb@kernel.org
|
|
The current hypercall interface for doing PCI device operations always uses
a segment field that has a 16 bit width. However on Linux there are buses
like VMD that hook up devices into the PCI hierarchy at segment >= 0x10000,
after the maximum possible segment enumerated in ACPI.
Attempting to register or manage those devices with Xen would result in
errors at best, or overlaps with existing devices living on the truncated
equivalent segment values. Note also that the VMD segment numbers are
arbitrarily assigned by the OS, and hence there would need to be some
negotiation between Xen and the OS to agree on how to enumerate VMD
segments and devices behind them.
Skip notifying Xen about those devices. Given how VMD bridges can
multiplex interrupts on behalf of devices behind them there's no need for
Xen to be aware of such devices for them to be usable by Linux.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250219092059.90850-2-roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Mounting a corrupted filesystem with directory which contains '.' dir
entry with rec_len == block size results in out-of-bounds read (later
on, when the corrupted directory is removed).
ext4_empty_dir() assumes every ext4 directory contains at least '.'
and '..' as directory entries in the first data block. It first loads
the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry()
and then uses its rec_len member to compute the location of '..' dir
entry (in ext4_next_entry). It assumes the '..' dir entry fits into the
same data block.
If the rec_len of '.' is precisely one block (4KB), it slips through the
sanity checks (it is considered the last directory entry in the data
block) and leaves "struct ext4_dir_entry_2 *de" point exactly past the
memory slot allocated to the data block. The following call to
ext4_check_dir_entry() on new value of de then dereferences this pointer
which results in out-of-bounds mem access.
Fix this by extending __ext4_check_dir_entry() to check for '.' dir
entries that reach the end of data block. Make sure to ignore the phony
dir entries for checksum (by checking name_len for non-zero).
Note: This is reported by KASAN as use-after-free in case another
structure was recently freed from the slot past the bound, but it is
really an OOB read.
This issue was found by syzkaller tool.
Call Trace:
[ 38.594108] BUG: KASAN: slab-use-after-free in __ext4_check_dir_entry+0x67e/0x710
[ 38.594649] Read of size 2 at addr ffff88802b41a004 by task syz-executor/5375
[ 38.595158]
[ 38.595288] CPU: 0 UID: 0 PID: 5375 Comm: syz-executor Not tainted 6.14.0-rc7 #1
[ 38.595298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 38.595304] Call Trace:
[ 38.595308] <TASK>
[ 38.595311] dump_stack_lvl+0xa7/0xd0
[ 38.595325] print_address_description.constprop.0+0x2c/0x3f0
[ 38.595339] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595349] print_report+0xaa/0x250
[ 38.595359] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595368] ? kasan_addr_to_slab+0x9/0x90
[ 38.595378] kasan_report+0xab/0xe0
[ 38.595389] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595400] __ext4_check_dir_entry+0x67e/0x710
[ 38.595410] ext4_empty_dir+0x465/0x990
[ 38.595421] ? __pfx_ext4_empty_dir+0x10/0x10
[ 38.595432] ext4_rmdir.part.0+0x29a/0xd10
[ 38.595441] ? __dquot_initialize+0x2a7/0xbf0
[ 38.595455] ? __pfx_ext4_rmdir.part.0+0x10/0x10
[ 38.595464] ? __pfx___dquot_initialize+0x10/0x10
[ 38.595478] ? down_write+0xdb/0x140
[ 38.595487] ? __pfx_down_write+0x10/0x10
[ 38.595497] ext4_rmdir+0xee/0x140
[ 38.595506] vfs_rmdir+0x209/0x670
[ 38.595517] ? lookup_one_qstr_excl+0x3b/0x190
[ 38.595529] do_rmdir+0x363/0x3c0
[ 38.595537] ? __pfx_do_rmdir+0x10/0x10
[ 38.595544] ? strncpy_from_user+0x1ff/0x2e0
[ 38.595561] __x64_sys_unlinkat+0xf0/0x130
[ 38.595570] do_syscall_64+0x5b/0x180
[ 38.595583] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: ac27a0ec112a0 ("[PATCH] ext4: initial copy of files from ext3")
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: linux-ext4@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Mahmoud Adam <mngyadam@amazon.com>
Cc: stable@vger.kernel.org
Cc: security@kernel.org
Link: https://patch.msgid.link/b3ae36a6794c4a01944c7d70b403db5b@amazon.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
A user complained that a message such as:
EXT4-fs (nvme0n1p3): re-mounted UUID ro. Quota mode: none.
implied that the file system was previously mounted read/write and was
now remounted read-only, when it could have been some other mount
state that had changed by the "mount -o remount" operation. Fix this
by only logging "ro"or "r/w" when it has changed.
https://bugzilla.kernel.org/show_bug.cgi?id=219132
Signed-off-by: Nicolas Bretz <bretznic@gmail.com>
Link: https://patch.msgid.link/20250319171011.8372-1-bretznic@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The error out label of file_modified() should be out_inode_lock in
ext4_fallocate().
Fixes: 2890e5e0f49e ("ext4: move out common parts into ext4_fallocate()")
Reported-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250319023557.2785018-1-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently, outside error paths, we auto commit the super block after 1
hour has passed and 16MB worth of updates have been written since last
commit. This is a policy decision so make this tunable while keeping the
defaults same. This is useful if user wants to tweak the superblock
behavior or for debugging the codepath by allowing to trigger it more
frequently.
We can now tweak the super block update using sb_update_sec and
sb_update_kb files in /sys/fs/ext4/<dev>/
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/950fb8c9b2905620e16f02a3b9eeea5a5b6cb87e.1742279837.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
