| Age | Commit message (Collapse) | Author |
|---|
|
Some boards have the codec IRQ hooked-up as normally, so the driver can
still do things like headset vs headphones and button-press detection,
but instead of using one of the JD pins of the codec, an external GPIO
is used to report the jack-presence switch status of the jack.
Add support for boards which have this setup and which specify which
external GPIO to use in the special Android AMCR0F28 ACPI device.
And add a quirk for the Asus TF103C tablet which uses this setup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-7-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
AMCR0F28 ACPI dev
Some X86 tablets, which ship with Android as factory installed OS,
specify codec IRQs/GPIOS in a special Android AMCR0F28 ACPI device.
Add support for retrieving the codec IRQ from this ACPI device instead
of from the 10EC5640 device describing the codec itself and enable this
on Asus MemoPad 7 ME176C tablets.
This fixes jack-detect not working on these tablets.
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some boards have the codec IRQ hooked-up as normally, so the driver can
still do things like headset vs headphones and button-press detection,
but instead of using one of the JD pins of the codec, an external GPIO
is used to report the jack-presence switch status of the jack.
Add support for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On some boards where the firmware/fwnode information is in essence
read-only (x86 + ACPI boards) the i2c_client for the codec may contain
the wrong IRQ or no IRQ at all.
Since we only request the IRQ once snd_soc_component_set_jack() gets
called, allow machine drivers to override the IRQ with the proper one
through the data parameter to snd_soc_component_set_jack().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change jack_work from a struct work_struct to a struct delayed_work, this
is a preparation patch for adding support for boards where an external
GPIO is used for jack-detect, rather then one of the JD pins of the codec.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 2b9c8d2b3c89 ("ASoC: rt5640: Add the HDA header support") adds
re-queuing of the jack_work on resume when rt5640->jd_src != 0.
But the jack_work will unconditionally deref rt5640->jack and that might
be NULL. E.g. the sound/soc/intel/boards/bytcr_rt5640.c machine driver
call snd_soc_component_set_jack(codec, NULL, NULL) from pre_suspend to
disable the IRQ to avoid spurious wakeups, so when rt5640_resume()
runs rt5640->jack will be NULL in this case.
Make the queueing of the work conditional on rt5640->jack instead of
on rt5640->jd_src to fix this.
Fixes: 2b9c8d2b3c89 ("ASoC: rt5640: Add the HDA header support")
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to RM, on auto mode:
For codec AK4458 and AK4497, the lowest ratio of MLCK/FS is 256
if sample rate is 8kHz-48kHz,
For codec AK5558, the lowest ratio of MLCK/FS is 512 if sample
rate is 8kHz-48kHz.
With these setting the sound quality for 8kHz-48kHz can be improved.
Fixes: aa736700f42f ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641292835-19085-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Transfer the refined slots and slot_width to akcodec_get_mclk_rate()
for mclk calculation, otherwise the mclk frequency does not match
with the slots and slot_width for S16_LE format, because the default
slot_width is 32.
Fixes: aa736700f42f ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641292835-19085-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SAI on i.MX8MQ don't support one2one ratio for mclk:bclk, so
the mclk frequency exceeds the supported range of codec for
the case that sample rate is larger than 705kHZ and format is
S32_LE. Update the supported width for such case.
Fixes: aa736700f42f ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641292835-19085-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MacBook Air 8,1 and 8,2 also need querying of LE Tx power
to be disabled for Bluetooth to work.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
|
|
SMC connections might fail to be registered in a link group due to
unable to find a usable link during its creation. As a result,
smc_conn_create() will return a failure and most resources related
to the connection won't be applied or initialized, such as
conn->abort_work or conn->lnk.
If smc_conn_free() is invoked later, it will try to access the
uninitialized resources related to the connection, thus causing
a warning or crash.
This patch tries to fix this by resetting conn->lgr to NULL if an
abnormal exit occurs in smc_lgr_register_conn(), thus avoiding the
access to uninitialized resources in smc_conn_free().
Meanwhile, the new created link group should be terminated if smc
connections can't be registered in it. So smc_lgr_cleanup_early() is
modified to take care of link group only and invoked to terminate
unusable link group by smc_conn_create(). The call to smc_conn_free()
is moved out from smc_lgr_cleanup_early() to smc_conn_abort().
Fixes: 56bc3b2094b4 ("net/smc: assign link to a new connection")
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function devm_gpiod_get_index() return error pointers on error.
Thus devm_gpiod_get_index_optional() could return NULL and error pointers.
The same as devm_gpiod_get_optional() function. Using IS_ERR_OR_NULL()
check to catch error pointers.
Fixes: 77131dfe ("Bluetooth: hci_qca: Replace devm_gpiod_get() with devm_gpiod_get_optional()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
For the possible failure of the platform_get_irq(), the returned irq
could be error number and will finally cause the failure of the
request_irq().
Consider that platform_get_irq() can now in certain cases return
-EPROBE_DEFER, and the consequences of letting request_irq() effectively
convert that into -EINVAL, even at probe time rather than later on.
So it might be better to check just now.
Fixes: 0395ffc1ee05 ("Bluetooth: hci_bcm: Add PM for BCM devices")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
As the possible failure of the allocation, the devm_ioremap() may return
NULL pointer.
Take tgec_initialization() as an example.
If allocation fails, the params->base_addr will be NULL pointer and will
be assigned to tgec->regs in tgec_config().
Then it will cause the dereference of NULL pointer in set_mac_address(),
which is called by tgec_init().
Therefore, it should be better to add the sanity check after the calling
of the devm_ioremap().
Fixes: 3933961682a3 ("fsl/fman: Add FMan MAC driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Laurent reported that they have seen a significant amount of TCP retransmissions
at high throughput from applications residing in network namespaces talking to
the outside world via veths. The drops were seen on the qdisc layer (fq_codel,
as per systemd default) of the phys device such as ena or virtio_net due to all
traffic hitting a _single_ TX queue _despite_ multi-queue device. (Note that the
setup was _not_ using XDP on veths as the issue is generic.)
More specifically, after edbea9220251 ("veth: Store queue_mapping independently
of XDP prog presence") which made it all the way back to v4.19.184+,
skb_record_rx_queue() would set skb->queue_mapping to 1 (given 1 RX and 1 TX
queue by default for veths) instead of leaving at 0.
This is eventually retained and callbacks like ena_select_queue() will also pick
single queue via netdev_core_pick_tx()'s ndo_select_queue() once all the traffic
is forwarded to that device via upper stack or other means. Similarly, for others
not implementing ndo_select_queue() if XPS is disabled, netdev_pick_tx() might
call into the skb_tx_hash() and check for prior skb_rx_queue_recorded() as well.
In general, it is a _bad_ idea for virtual devices like veth to mess around with
queue selection [by default]. Given dev->real_num_tx_queues is by default 1,
the skb->queue_mapping was left untouched, and so prior to edbea9220251 the
netdev_core_pick_tx() could do its job upon __dev_queue_xmit() on the phys device.
Unbreak this and restore prior behavior by removing the skb_record_rx_queue()
from veth_xmit() altogether.
If the veth peer has an XDP program attached, then it would return the first RX
queue index in xdp_md->rx_queue_index (unless configured in non-default manner).
However, this is still better than breaking the generic case.
Fixes: edbea9220251 ("veth: Store queue_mapping independently of XDP prog presence")
Fixes: 638264dc9022 ("veth: Support per queue XDP ring")
Reported-by: Laurent Bernaille <laurent.bernaille@datadoghq.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: Toshiaki Makita <toshiaki.makita1@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the kernel, when referring to the chip BCM2835, it is more suitable
to use BCM2835 to BM2835. To avoid confusion, and to make things more
consistent, rename the headers titles accordingly.
Suggested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Link: https://lore.kernel.org/r/19acea9e9da0d3ebb1a7e6bce511a3c09e8c80c3.1641414449.git.gascoar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the kernel, all names related to the chip BCM2835 are always named
bcm2835_*. To avoid confusion, and to make things more consistent,
rename the string term bm2835_* to bcm2835_*.
While at it, some realignments were made to improve readability.
Suggested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Link: https://lore.kernel.org/r/91caae07fce0e4511f283388304e935526ba29ed.1641414449.git.gascoar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the kernel, all names related to the chip BCM2835 are always named
bcm2835_*. To avoid confusion, and to make things more consistent,
rename all variables using bm2835_* to bcm2835_*.
While at it, some realignments were made to improve readability.
Suggested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Link: https://lore.kernel.org/r/a0af5deacebc2da9b21772c7677e1a9627edbed6.1641414449.git.gascoar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the kernel, all names related to the chip BCM2835 are always named
bcm2835_*. To avoid confusion, and to make things more consistent,
rename functions using bm2835_* to bcm2835_*.
While at it, some realignments were made to improve readability.
Suggested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Link: https://lore.kernel.org/r/d3b6f67421c75829105f793cfb9ec1414b926bf6.1641414449.git.gascoar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bm2835_mmal_v4l2_ctrl
In the kernel, all names related to the chip BCM2835 are always named
bcm2835_*. To avoid confusion, and to make things more consistent,
rename the structures bm2835_mmal_dev and bm2835_mmal_v4l2_ctrl
accordingly.
While at it, one realignment was made to improve readability.
Suggested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Link: https://lore.kernel.org/r/a893f24fc5ee6c276ea982f141b42ec0a00d7194.1641414449.git.gascoar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the ibmveth sysfs code to use default_groups
field which has been the preferred way since aa30f47cf666 ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Cristobal Forno <cforno12@linux.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As the possible alloc failure of devm_kcalloc(), it could return null
pointer.
Therefore, 'strings' should be checked and return NULL if alloc fails to
prevent the dereference of the NULL pointer.
Also, the caller should also deal with the return value of the
gb_generate_enum_strings() and return -ENOMEM if returns NULL.
Moreover, because the memory allocated with devm_kzalloc() will be
freed automatically when the last reference to the device is dropped,
the 'gbe' in gbaudio_tplg_create_enum_kctl() and
gbaudio_tplg_create_enum_ctl() do not need to free manually.
But the 'control' in gbaudio_tplg_create_widget() and
gbaudio_tplg_process_kcontrols() has a specially error handle to
cleanup.
So it should be better to cleanup 'control' when fails.
Fixes: e65579e335da ("greybus: audio: topology: Enable enumerated control support")
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220104150628.1987906-1-jiasheng@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This code is holding the &ofdpa->flow_tbl_lock spinlock so it is not
allowed to sleep. That means we have to pass the OFDPA_OP_FLAG_NOWAIT
flag to ofdpa_flow_tbl_del().
Fixes: 936bd486564a ("rocker: use FIB notifications instead of switchdev calls")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When performing an I2C transfer where the last message was a write KASAN
would complain:
BUG: KASAN: slab-out-of-bounds in mpc_i2c_do_action+0x154/0x630
Read of size 2 at addr c814e310 by task swapper/2/0
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G B 5.16.0-rc8 #1
Call Trace:
[e5ee9d50] [c08418e8] dump_stack_lvl+0x4c/0x6c (unreliable)
[e5ee9d70] [c02f8a14] print_address_description.constprop.13+0x64/0x3b0
[e5ee9da0] [c02f9030] kasan_report+0x1f0/0x204
[e5ee9de0] [c0c76ee4] mpc_i2c_do_action+0x154/0x630
[e5ee9e30] [c0c782c4] mpc_i2c_isr+0x164/0x240
[e5ee9e60] [c00f3a04] __handle_irq_event_percpu+0xf4/0x3b0
[e5ee9ec0] [c00f3d40] handle_irq_event_percpu+0x80/0x110
[e5ee9f40] [c00f3e48] handle_irq_event+0x78/0xd0
[e5ee9f60] [c00fcfec] handle_fasteoi_irq+0x19c/0x370
[e5ee9fa0] [c00f1d84] generic_handle_irq+0x54/0x80
[e5ee9fc0] [c0006b54] __do_irq+0x64/0x200
[e5ee9ff0] [c0007958] __do_IRQ+0xe8/0x1c0
[c812dd50] [e3eaab20] 0xe3eaab20
[c812dd90] [c0007a4c] do_IRQ+0x1c/0x30
[c812dda0] [c0000c04] ExternalInput+0x144/0x160
--- interrupt: 500 at arch_cpu_idle+0x34/0x60
NIP: c000b684 LR: c000b684 CTR: c0019688
REGS: c812ddb0 TRAP: 0500 Tainted: G B (5.16.0-rc8)
MSR: 00029002 <CE,EE,ME> CR: 22000488 XER: 20000000
GPR00: c10ef7fc c812de90 c80ff200 c2394718 00000001 00000001 c10e3f90 00000003
GPR08: 00000000 c0019688 c2394718 fc7d625b 22000484 00000000 21e17000 c208228c
GPR16: e3e99284 00000000 ffffffff c2390000 c001bac0 c2082288 c812df60 c001ba60
GPR24: c23949c0 00000018 00080000 00000004 c80ff200 00000002 c2348ee4 c2394718
NIP [c000b684] arch_cpu_idle+0x34/0x60
LR [c000b684] arch_cpu_idle+0x34/0x60
--- interrupt: 500
[c812de90] [c10e3f90] rcu_eqs_enter.isra.60+0xc0/0x110 (unreliable)
[c812deb0] [c10ef7fc] default_idle_call+0xbc/0x230
[c812dee0] [c00af0e8] do_idle+0x1c8/0x200
[c812df10] [c00af3c0] cpu_startup_entry+0x20/0x30
[c812df20] [c001e010] start_secondary+0x5d0/0xba0
[c812dff0] [c00028a0] __secondary_start+0x90/0xdc
This happened because we would overrun the i2c->msgs array on the final
interrupt for the I2C STOP. This didn't happen if the last message was a
read because there is no interrupt in that case. Ensure that we only
access the current message if we are not processing a I2C STOP
condition.
Fixes: 1538d82f4647 ("i2c: mpc: Interrupt driven transfer")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Now when driver uses devm_pci_remap_iospace() function, it is possible
implement ->remove() callback for unbinding device from driver.
Implement mvebu_pcie_remove() callback with proper cleanup phase, drop
driver's suppress_bind_attrs flag and switch type of CONFIG_PCI_MVEBU
option from bool to tristate.
This allows to compile pci-mvebu.c driver as loadable module pci-mvebu.ko
with ability to unload it.
Link: https://lore.kernel.org/r/20211126144307.7568-3-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
This would allow to compile pci-mvebu.c driver as module.
Link: https://lore.kernel.org/r/20211126144307.7568-2-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
The default_attrs array of attributes for the edd sysfs entries is
totally empty for some reason, and a list of attributes is added later
after the object is created (which should be fixed up later as it's
racy). Because this pointer is never used, and is empty, and we are
trying to remove all default_attrs usages, just delete it.
Link: https://lore.kernel.org/r/20220105182634.2802684-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the firmware dmi-sysfs sysfs code to use default_groups
field which has been the preferred way since aa30f47cf666 ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.
Link: https://lore.kernel.org/r/20220105181719.2737782-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow
at24 updates for v5.17
- add support for a new model: Microchip 24c1025
- reorganize the compatible definitions in the DT binding document
- drop the at24_client structure by retrieving the struct device associated
with the chip's regmap
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the firmware qemu_fw_cfg sysfs code to use default_groups
field which has been the preferred way since aa30f47cf666 ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: qemu-devel@nongnu.org
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20220105183133.2812848-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a new driver for the LetSketch / VSON WP9620N drawing tablet. This
drawing tablet is also sold under other brand names such as Case U,
presumably this driver will work for all of them. But it has only been
tested with a LetSketch WP9620N model.
These tablets also work without a special HID driver, but then only
part of the active area works and both the pad and stylus buttons are
hardwired to special key-combos. E.g. the 2 stylus buttons send right
mouse clicks / resp. "e" key presses.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2005575
BugLink: https://github.com/DIGImend/digimend-kernel-drivers/issues/528
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Use the function key table introduced for the Magic Keyboard 2021
without fingerprint reader in the models with fingerprint reader and/or
numpad.
Tested with the ANSI variant of the keyboard with and without numpad.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The new 2021 apple models have a different FN key assignment. Add a new
translation table and use that for the 2021 magic keyboard.
Signed-off-by: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The Apple Magic Trackpad 2021 (3rd generation) has the same product ID
as the 2nd generation. However, when connected through Bluetooth, the
version has changed from 0x107 to 0x110.
The other meaningful change is that the name has dropped the generation
number and now it is just "Apple Inc. Magic Trackpad", like the first
generation model.
Set the device name correctly to ensure the same driver settings are
loaded, whether connected via Bluetooth or USB.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
If the Apple Magic Trackpad 2 has been connected to a Mac, the name
is automatically personalized showing its owner name. For example:
"José Expósito's Trackpad".
When connected through Bluetooth, the personalized name is reported,
however, when connected through USB the generic name is reported.
Set the device name correctly to ensure the same driver settings are
loaded, whether connected via Bluetooth or USB.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Tested-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Clean the following coccicheck warning:
./drivers/net/ethernet/sfc/efx_channels.c:870:36-37: WARNING opportunity
for swap().
./drivers/net/ethernet/sfc/efx_channels.c:824:36-37: WARNING opportunity
for swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In ethtool_get_phy_stats(), the phydev varaible is set to
dev->phydev but dev->phydev is still used. Replace
dev->phydev uses with phydev.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert the PCS selection to use mac_select_pcs, which allows the PCS
to perform any validation it needs.
We must use separate phylink_pcs instances for the USX and SGMII PCS,
rather than just changing the "ops" pointer before re-setting it to
phylink as this interface queries the PCS, rather than requesting it
to be changed.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It seems pretty clear ppp layer assumed user space
would always be kind to provide enough data
in their write() to a ppp device.
This patch makes sure user provides at least
2 bytes.
It adds PPP_PROTO_LEN macro that could replace
in net-next many occurrences of hard-coded 2 value.
I replaced only one occurrence to ease backports
to stable kernels.
The bug manifests in the following report:
BUG: KMSAN: uninit-value in ppp_send_frame+0x28d/0x27c0 drivers/net/ppp/ppp_generic.c:1740
ppp_send_frame+0x28d/0x27c0 drivers/net/ppp/ppp_generic.c:1740
__ppp_xmit_process+0x23e/0x4b0 drivers/net/ppp/ppp_generic.c:1640
ppp_xmit_process+0x1fe/0x480 drivers/net/ppp/ppp_generic.c:1661
ppp_write+0x5cb/0x5e0 drivers/net/ppp/ppp_generic.c:513
do_iter_write+0xb0c/0x1500 fs/read_write.c:853
vfs_writev fs/read_write.c:924 [inline]
do_writev+0x645/0xe00 fs/read_write.c:967
__do_sys_writev fs/read_write.c:1040 [inline]
__se_sys_writev fs/read_write.c:1037 [inline]
__x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:524 [inline]
slab_alloc_node mm/slub.c:3251 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1126 [inline]
ppp_write+0x11d/0x5e0 drivers/net/ppp/ppp_generic.c:501
do_iter_write+0xb0c/0x1500 fs/read_write.c:853
vfs_writev fs/read_write.c:924 [inline]
do_writev+0x645/0xe00 fs/read_write.c:967
__do_sys_writev fs/read_write.c:1040 [inline]
__se_sys_writev fs/read_write.c:1037 [inline]
__x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-ppp@vger.kernel.org
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Dumazet suggested to allow users to modify max GRO packet size.
We have seen GRO being disabled by users of appliances (such as
wifi access points) because of claimed bufferbloat issues,
or some work arounds in sch_cake, to split GRO/GSO packets.
Instead of disabling GRO completely, one can chose to limit
the maximum packet size of GRO packets, depending on their
latency constraints.
This patch adds a per device gro_max_size attribute
that can be changed with ip link command.
ip link set dev eth0 gro_max_size 16000
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When multiple sockets using the SOF_TIMESTAMPING_BIND_PHC flag received
a packet with a hardware timestamp (e.g. multiple PTP instances in
different PTP domains using the UDPv4/v6 multicast or L2 transport),
the timestamps received on some sockets were corrupted due to repeated
conversion of the same timestamp (by the same or different vclocks).
Fix ptp_convert_timestamp() to not modify the shared skb timestamp
and return the converted timestamp as a ktime_t instead. If the
conversion fails, return 0 to not confuse the application with
timestamps corresponding to an unexpected PHC.
Fixes: d7c088265588 ("net: socket: support hardware timestamp conversion to PHC bound")
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As discussed during review here:
https://patchwork.kernel.org/project/netdevbpf/patch/20220105132141.2648876-3-vladimir.oltean@nxp.com/
we should inform developers about pitfalls of concurrent access to the
boolean properties of dsa_switch and dsa_port, now that they've been
converted to bit fields. No other measure than a comment needs to be
taken, since the code paths that update these bit fields are not
concurrent with each other.
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a cosmetic incremental fixup to commits
7787ff776398 ("net: dsa: merge all bools of struct dsa_switch into a single u32")
bde82f389af1 ("net: dsa: merge all bools of struct dsa_port into a single u8")
The desire to make this change was enunciated after posting these
patches here:
https://patchwork.kernel.org/project/netdevbpf/cover/20220105132141.2648876-1-vladimir.oltean@nxp.com/
but due to a slight timing overlap (message posted at 2:28 p.m. UTC,
merge commit is at 2:46 p.m. UTC), that comment was missed and the
changes were applied as-is.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vladimir Oltean says:
====================
DSA initialization cleanups
These patches contain miscellaneous work that makes the DSA init code
path symmetric with the teardown path, and some additional patches
carried by Ansuel Smith for his register access over Ethernet work, but
those patches can be applied as-is too.
https://patchwork.kernel.org/project/netdevbpf/patch/20211214224409.5770-3-ansuelsmth@gmail.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is said that as soon as a network interface is registered, all its
resources should have already been prepared, so that it is available for
sending and receiving traffic. One of the resources needed by a DSA
slave interface is the master.
dsa_tree_setup
-> dsa_tree_setup_ports
-> dsa_port_setup
-> dsa_slave_create
-> register_netdevice
-> dsa_tree_setup_master
-> dsa_master_setup
-> sets up master->dsa_ptr, which enables reception
Therefore, there is a short period of time after register_netdevice()
during which the master isn't prepared to pass traffic to the DSA layer
(master->dsa_ptr is checked by eth_type_trans). Same thing during
unregistration, there is a time frame in which packets might be missed.
Note that this change opens us to another race: dsa_master_find_slave()
will get invoked potentially earlier than the slave creation, and later
than the slave deletion. Since dp->slave starts off as a NULL pointer,
the earlier calls aren't a problem, but the later calls are. To avoid
use-after-free, we should zeroize dp->slave before calling
dsa_slave_destroy().
In practice I cannot really test real life improvements brought by this
change, since in my systems, netdevice creation races with PHY autoneg
which takes a few seconds to complete, and that masks quite a few races.
Effects might be noticeable in a setup with fixed links all the way to
an external system.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit a57d8c217aad ("net: dsa: flush switchdev workqueue before
tearing down CPU/DSA ports"), the port setup and teardown procedure
became asymmetric.
The fact of the matter is that user ports need the shared ports to be up
before they can be used for CPU-initiated termination. And since we
register net devices for the user ports, those won't be functional until
we also call the setup for the shared (CPU, DSA) ports. But we may do
that later, depending on the port numbering scheme of the hardware we
are dealing with.
It just makes sense that all shared ports are brought up before any user
port is. I can't pinpoint any issue due to the current behavior, but
let's change it nonetheless, for consistency's sake.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DSA needs to simulate master tracking events when a binding is first
with a DSA master established and torn down, in order to give drivers
the simplifying guarantee that ->master_state_change calls are made
only when the master's readiness state to pass traffic changes.
master_state_change() provide a operational bool that DSA driver can use
to understand if DSA master is operational or not.
To avoid races, we need to block the reception of
NETDEV_UP/NETDEV_CHANGE/NETDEV_GOING_DOWN events in the netdev notifier
chain while we are changing the master's dev->dsa_ptr (this changes what
netdev_uses_dsa(dev) reports).
The dsa_master_setup() and dsa_master_teardown() functions optionally
require the rtnl_mutex to be held, if the tagger needs the master to be
promiscuous, these functions call dev_set_promiscuity(). Move the
rtnl_lock() from that function and make it top-level.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At present there are two paths for changing the MTU of the DSA master.
The first is:
dsa_tree_setup
-> dsa_tree_setup_ports
-> dsa_port_setup
-> dsa_slave_create
-> dsa_slave_change_mtu
-> dev_set_mtu(master)
The second is:
dsa_tree_setup
-> dsa_tree_setup_master
-> dsa_master_setup
-> dev_set_mtu(dev)
So the dev_set_mtu() call from dsa_master_setup() has been effectively
superseded by the dsa_slave_change_mtu(slave_dev, ETH_DATA_LEN) that is
done from dsa_slave_create() for each user port. The later function also
updates the master MTU according to the largest user port MTU from the
tree. Therefore, updating the master MTU through a separate code path
isn't needed.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
