summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-17net/sched: cls_bpf: Reflect HW offload statusOr Gerlitz
BPF classifier support for the "in hw" offloading flags. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Amir Vadai <amir@vadai.me> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net/sched: cls_u32: Reflect HW offload statusOr Gerlitz
U32 support for the "in hw" offloading flags. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Amir Vadai <amir@vadai.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net/sched: cls_matchall: Reflect HW offloading statusOr Gerlitz
Matchall support for the "in hw" offloading flags. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Amir Vadai <amir@vadai.me> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net/sched: cls_flower: Reflect HW offload statusOr Gerlitz
Flower support for the "in hw" offloading flags. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Amir Vadai <amir@vadai.me> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net/sched: Reflect HW offload statusOr Gerlitz
Currently there is no way of querying whether a filter is offloaded to HW or not when using "both" policy (where none of skip_sw or skip_hw flags are set by user-space). Add two new flags, "in hw" and "not in hw" such that user space can determine if a filter is actually offloaded to hw or not. The "in hw" UAPI semantics was chosen so it's similar to the "skip hw" flag logic. If none of these two flags are set, this signals running over older kernel. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Amir Vadai <amir@vadai.me> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net/sched: cls_matchall: Dump the classifier flagsOr Gerlitz
The classifier flags are not dumped to user-space, do that. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net/sched: cls_flower: Properly handle classifier flags dumpingOr Gerlitz
Dump the classifier flags only if non zero and make sure to check the return status of the handler that puts them into the netlink msg. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net: oki-semi: pch_gbe: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17Merge tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux ↵Arnd Bergmann
into fixes Pull "Reset controller fixes for v4.10" from Philipp Zabel: - Remove erroneous negation of the error check of the reset function to decrement trigger_count in the error case, not on success. This fixes shared resets to actually only trigger once, as intended. * tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux: reset: fix shared reset triggered_count decrement on error
2017-02-17net: ethernet: ti: cpsw: correct ale dev to cpswIvan Khoronzhuk
The ale is a property of cpsw, so change dev to cpsw->dev, aka pdev->dev, to be consistent. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17packet: Do not call fanout_release from atomic contextsAnoob Soman
Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev"), unfortunately, introduced the following issues. 1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside rcu_read-side critical section. rcu_read_lock disables preemption, most often, which prohibits calling sleeping functions. [ ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section! [ ] [ ] rcu_scheduler_active = 1, debug_locks = 0 [ ] 4 locks held by ovs-vswitchd/1969: [ ] #0: (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40 [ ] #1: (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch] [ ] #2: (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20 [ ] #3: (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0 [ ] [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110 [ ] [<ffffffff810a2da7>] ___might_sleep+0x57/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30 [ ] [<ffffffff81186e88>] ? printk+0x4d/0x4f [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock). "sleeping function called from invalid context" [ ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff810a2f52>] ___might_sleep+0x202/0x210 [ ] [<ffffffff810a2fd0>] __might_sleep+0x70/0x90 [ ] [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0 [ ] [<ffffffff816106dd>] fanout_release+0x1d/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 3. calling dev_remove_pack(&fanout->prot_hook), from inside spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack() -> synchronize_net(), which might sleep. [ ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002 [ ] INFO: lockdep is turned off. [ ] Call Trace: [ ] [<ffffffff813770c1>] dump_stack+0x85/0xc4 [ ] [<ffffffff81186274>] __schedule_bug+0x64/0x73 [ ] [<ffffffff8162b8cb>] __schedule+0x6b/0xd10 [ ] [<ffffffff8162c5db>] schedule+0x6b/0x80 [ ] [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410 [ ] [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810 [ ] [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10 [ ] [<ffffffff8154eab5>] synchronize_net+0x35/0x50 [ ] [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20 [ ] [<ffffffff8161077e>] fanout_release+0xbe/0xe0 [ ] [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0 4. fanout_release() races with calls from different CPU. To fix the above problems, remove the call to fanout_release() under rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to __fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure fanout->prot_hook is removed as well. Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17net: nvidia: forcedeth: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17Merge branch 'ptp-attribute-cleanup'David S. Miller
Dmitry Torokhov says: ==================== PTP attribute handling cleanup PTP core was creating some attributes, such as "period" and "fifo", and the entire "pins" attribute group, after creating class deevice, which creates a race for userspace: uevent may arrive before all attributes are created. This series of patches switches PTP to use is_visible() to control visibility of attributes in a group, and device_create_with_groups() to ensure that attributes are created before we notify userspace of a new device. v2: - added Richard's acked-by to patch #1 - removed use of kmalloc_array in favor of kcalloc in patch #2 at Richard's request - added a cover letter v1: - initial patch set ==================== Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17ptp: create "pins" together with the rest of attributesDmitry Torokhov
Let's switch to using device_create_with_groups(), which will allow us to create "pins" attribute group together with the rest of ptp device attributes, and before userspace gets notified about ptp device creation. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17ptp: use is_visible method to hide unused attributesDmitry Torokhov
Instead of creating selected attributes after the device is created (and after userspace potentially seen uevent), lets use attribute group is_visible() method to control which attributes are shown. This will allow us to create all attributes (except "pins" group, which will be taken care of later) before userspace gets notified about new ptp class device. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17ptp: use kcalloc when allocating arraysDmitry Torokhov
kcalloc is more semantically correct when allocating arrays of objects, and overflow-safe. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17ptp: do not explicitly set drvdata in ptp_clock_register()Dmitry Torokhov
We do not need explicitly call dev_set_drvdata(), as it is done for us by device_create(). Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17mlx4: do not fire tasklet unless necessaryEric Dumazet
All rx and rx netdev interrupts are handled by respectively by mlx4_en_rx_irq() and mlx4_en_tx_irq() which simply schedule a NAPI. But mlx4_eq_int() also fires a tasklet to service all items that were queued via mlx4_add_cq_to_tasklet(), but this handler was not called unless user cqe was handled. This is very confusing, as "mpstat -I SCPU ..." show huge number of tasklet invocations. This patch saves this overhead, by carefully firing the tasklet directly from mlx4_add_cq_to_tasklet(), removing four atomic operations per IRQ. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17reset: fix shared reset triggered_count decrement on errorJerome Brunet
For a shared reset, when the reset is successful, the triggered_count is incremented when trying to call the reset callback, so that another device sharing the same reset line won't trigger it again. If the reset has not been triggered successfully, the trigger_count should be decremented. The code does the opposite, and decrements the trigger_count on success. As a consequence, another device sharing the reset will be able to trigger it again. Fixed be removing negation in from of the error code of the reset function. Fixes: 7da33a37b48f ("reset: allow using reset_control_reset with shared reset") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-02-16ntb: ntb_hw_intel: link_poll isn't clearing the pending status properlyDave Jiang
On Skylake hardware, the link_poll isn't clearing the pending interrupt bit. Adding a new function for SKX that handles clearing of status bit the right way. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Fixes: 783dfa6c ("ntb: Adding Skylake Xeon NTB support") Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-02-16ntb_transport: Pick an unused queueThomas VanSelus
Fix typo causing ntb_transport_create_queue to select the first queue every time, instead of using the next free queue. Signed-off-by: Thomas VanSelus <tvanselus@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Acked-by: Allen Hubbe <Allen.Hubbe@dell.com> Fixes: fce8a7bb5 ("PCI-Express Non-Transparent Bridge Support") Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-02-16ntb: ntb_perf missing dmaengine_unmap_putDave Jiang
In the normal I/O execution path, ntb_perf is missing a call to dmaengine_unmap_put() after submission. That causes us to leak unmap objects. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Fixes: 8a7b6a77 ("ntb: ntb perf tool") Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-02-16NTB: ntb_transport: fix debugfs_remove_recursiveAllen Hubbe
The call to debugfs_remove_recursive(qp->debugfs_dir) of the sub-level directory must not be later than debugfs_remove_recursive(nt_debugfs_dir) of the top-level directory. Otherwise, the sub-level directory will not exist, and it would be invalid (panic) to attempt to remove it. This removes the top-level directory last, after sub-level directories have been cleaned up. Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com> Fixes: e26a5843f ("NTB: Split ntb_hw_intel and ntb_transport drivers") Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-02-16Merge tag 'drm-fixes-for-v4.10-final' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Just two last minute fixes, one for DP MST oopses and one for a radeon regression" * tag 'drm-fixes-for-v4.10-final' of git://people.freedesktop.org/~airlied/linux: drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor drm/dp/mst: fix kernel oops when turning off secondary monitor
2017-02-16Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2017-02-16 1) Make struct xfrm_input_afinfo const, nothing writes to it. From Florian Westphal. 2) Remove all places that write to the afinfo policy backend and make the struct const then. From Florian Westphal. 3) Prepare for packet consuming gro callbacks and add ESP GRO handlers. ESP packets can be decapsulated at the GRO layer then. It saves a round through the stack for each ESP packet. Please note that this has a merge coflict between commit 63fca65d0863 ("net: add confirm_neigh method to dst_ops") from net-next and 3d7d25a68ea5 ("xfrm: policy: remove garbage_collect callback") a2817d8b279b ("xfrm: policy: remove family field") from ipsec-next. The conflict can be solved as it is done in linux-next. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2017-02-16 This series contains updates to ixgbe only. Tony updates the driver to advertise 2.5Gb and 5.0Gb if the adapter supports it. Stephen Hemminger renames our dcbnl_ops since it is global to ixgbe_dcbnl_ops to avoid namespace issues. Mark updates the driver version based on the recent changes. Alex has the remainder of the changes, starting with consolidating functions that represent logical steps in the receive process so we can later update them more easily (and align with igb). Modify the receive path to only synchronize the length of the frame versus the entire buffer. Provided performance improvements by adding support for DMA_ATTR_SKIP_CPU_SYNC and DMA_ATTR_WEAK_ORDERING. Also made additional performance gains by batching the page count updates instead of doing them one at a time. Adjusted the receive path to use 3k buffers with 8k backing them in order to support build_skb with jumbo frames. Made additional driver improvements by using the length of the packet instead of the DD status to determine if a new descriptor is ready to be processed, which cuts down on reads. To reduce code duplication, pulled apart the receive path into separate functions. Added support for providing a buffer with headroom and tailroom to allow for shared info for NET_SKB_PAD and NET_IP_ALIGN. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17Merge branch 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes One regression fix for interlaced modes on radeon * 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor
2017-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-02-16Revert "nohz: Fix collision between tick and other hrtimers"Linus Torvalds
This reverts commit 24b91e360ef521a2808771633d76ebc68bd5604b and commit 7bdb59f1ad47 ("tick/nohz: Fix possible missing clock reprog after tick soft restart") that depends on it, Pavel reports that it causes occasional boot hangs for him that seem to depend on just how the machine was booted. In particular, his machine hangs at around the PCI fixups of the EHCI USB host controller, but only hangs from cold boot, not from a warm boot. Thomas Gleixner suspecs it's a CPU hotplug interaction, particularly since Pavel also saw suspend/resume issues that seem to be related. We're reverting for now while trying to figure out the root cause. Reported-bisected-and-tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org # reverted commits were marked for stable Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-16cxgb4: Remove redundant code in t4_uld_clean_up()Ganesh Goudar
Remove variable rxq_info and also remove redundant assignment to it. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16cxgb4: Add new T5 and T6 pci device id'sGanesh Goudar
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16cxgb4: Increase max number of tc u32 linksArjun V
Make max number of supported tc u32 links equal to max number of filters supported by hardware. Signed-off-by: Arjun V <arjun@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-16Merge tag 'media/v4.10-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fix from Mauro Carvalho Chehab: "A regression fix that makes the Siano driver to work again after the CONFIG_VMAP_STACK change" * tag 'media/v4.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] siano: make it work again with CONFIG_VMAP_STACK
2017-02-16vfs: fix uninitialized flags in splice_to_pipe()Miklos Szeredi
Flags (PIPE_BUF_FLAG_PACKET, PIPE_BUF_FLAG_GIFT) could remain on the unused part of the pipe ring buffer. Previously splice_to_pipe() left the flags value alone, which could result in incorrect behavior. Uninitialized flags appears to have been there from the introduction of the splice syscall. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> # 2.6.17+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "Fix a use after free bug introduced in 4.2 and using an uninitialized value introduced in 4.9" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix uninitialized flags in pipe_buffer fuse: fix use after free issue in fuse_dev_do_read()
2017-02-16Merge tag 'pci-v4.10-fixes-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Add back pcie_pme_remove() so we free the IRQ when removing PCIe port devices; previously the leaked IRQ caused an MSI BUG_ON" * tag 'pci-v4.10-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/PME: Restore pcie_pme_driver.remove
2017-02-16Bluetooth: fix spelling mistake: "advetising" -> "advertising"Colin Ian King
trivial fix to spelling mistake in BT_ERR_RATELIMITED error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btmrvl: fix spelling mistake: "caibration" -> "calibration"Colin Ian King
trivial fix to spelling mistake in BT_ERR error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) In order to avoid problems in the future, make cgroup bpf overriding explicit using BPF_F_ALLOW_OVERRIDE. From Alexei Staovoitov. 2) LLC sets skb->sk without proper skb->destructor and this explodes, fix from Eric Dumazet. 3) Make sure when we have an ipv4 mapped source address, the destination is either also an ipv4 mapped address or ipv6_addr_any(). Fix from Jonathan T. Leighton. 4) Avoid packet loss in fec driver by programming the multicast filter more intelligently. From Rui Sousa. 5) Handle multiple threads invoking fanout_add(), fix from Eric Dumazet. 6) Since we can invoke the TCP input path in process context, without BH being disabled, we have to accomodate that in the locking of the TCP probe. Also from Eric Dumazet. 7) Fix erroneous emission of NETEVENT_DELAY_PROBE_TIME_UPDATE when we aren't even updating that sysctl value. From Marcus Huewe. 8) Fix endian bugs in ibmvnic driver, from Thomas Falcon. [ This is the second version of the pull that reverts the nested rhashtable changes that looked a bit too scary for this late in the release - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) rhashtable: Revert nested table changes. ibmvnic: Fix endian errors in error reporting output ibmvnic: Fix endian error when requesting device capabilities net: neigh: Fix netevent NETEVENT_DELAY_PROBE_TIME_UPDATE notification net: xilinx_emaclite: fix freezes due to unordered I/O net: xilinx_emaclite: fix receive buffer overflow bpf: kernel header files need to be copied into the tools directory tcp: tcp_probe: use spin_lock_bh() uapi: fix linux/if_pppol2tp.h userspace compilation errors packet: fix races in fanout_add() ibmvnic: Fix initial MTU settings net: ethernet: ti: cpsw: fix cpsw assignment in resume kcm: fix a null pointer dereference in kcm_sendmsg() net: fec: fix multicast filtering hardware setup ipv6: Handle IPv4-mapped src to in6addr_any dst. ipv6: Inhibit IPv4-mapped src address on the wire. net/mlx5e: Disable preemption when doing TC statistics upcall rhashtable: Add nested tables tipc: Fix tipc_sk_reinit race conditions gfs2: Use rhashtable walk interface in glock_hash_walk ...
2017-02-16Bluetooth: btqcomsmd: Allow driver to build if COMPILE_TEST is enabledJavier Martinez Canillas
The driver only has runtime but no build time dependency with QCOM_SMD && QCOM_WCNSS_CTRL. So it can be built for testing purposes if COMPILE_TEST option is enabled. This is useful to have more build coverage and make sure that the driver is not affected by changes that could cause build regressions. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: Add another AR3012 04ca:3018 deviceDmitry Tunin
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3018 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2017-02-16Bluetooth: hci_bcm: Add support for BCM2E95 and BCM2E96Daniel Drake
The BCM2E96 ID is used by the ECS EF20 laptop, and BCM2E95 is present in the Weibu F3C. Both are now logged as: hci0: BCM: chip id 82 hci0: BCM43341B0 (002.001.014) build 0000 hci0: BCM (002.001.014) build 0158 The ECS vendor kernel predates the host-wakeup support in hci_bcm but it explicitly has a comment saying that the GPIO assignment needs to be reordered for BCM2E96: 1. (not used in vendor driver) 2. Device wakeup 3. Shutdown For both devices in question, the DSDT has these GPIOs listed in order of GpioInt, GpioIo, GpioIo. And if we use the first one listed (GpioInt) as the host wakeup, that interrupt handler fires while doing bluetooth I/O. I am assuming the convention of GPIO ordering has been changed for these new device IDs, so lets use the new ordering on such devices. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btbcm: Add a delay for module resetWen-chien Jesse Sung
Some btbcm devices require more time to complete its reset process. They won't reply any hci command until reset is done. [ 17.218554] Bluetooth: hci0 command 0x1001 tx timeout [ 25.214999] Bluetooth: hci0: BCM: Reading local version info failed (-110) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btusb: Add support for 413c:8143Wen-chien Jesse Sung
This is a Boardcom module and requires patchram to work. T: Bus=01 Lev=03 Prnt=03 Port=01 Cnt=02 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8143 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=20689D1FAF94 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16btmrvl: use dt's irqflags for wakeup pinJeffy Chen
Use irqflags parsed from dt. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16btmrvl: set irq_bt to -1 when failed to parse itJeffy Chen
The irq_of_parse_and_map will return 0 as a invalid irq. Set irq_bt to -1 in this case, so that the btmrvl resume/suspend code would not try to enable/disable it. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16btmrvl: avoid double-disable_irq() raceJeffy Chen
It's much the same as what we did for mwifiex in: b9da4d2 mwifiex: avoid double-disable_irq() race "We have a race where the wakeup IRQ might be in flight while we're calling mwifiex_disable_wake() from resume(). This can leave us disabling the IRQ twice. Let's disable the IRQ and enable it in case if we have double-disabled it." Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: Fix NULL pointer dereference in bt_sock_recvmsgEzequiel Garcia
As per the comment in include/linux/net.h, the recvfrom handlers should expect msg_name to be NULL. However, bt_sock_recvmsg() is currently not checking it, which could lead to a NULL pointer dereference. The following NULL pointer dereference was produced while testing L2CAP datagram reception. Note that the kernel is tainted due to the r8723bs module being inserted. However, it seems the fix still applies. $ l2test -r -G l2test[326]: Receiving ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ee008000 [00000000] *pgd=7f896835 Internal error: Oops: 817 [#1] PREEMPT SMP ARM Modules linked in: r8723bs(O) CPU: 0 PID: 326 Comm: l2test Tainted: G O 4.8.0 #1 Hardware name: Allwinner sun7i (A20) Family task: ef1c6880 task.stack: eea70000 PC is at __memzero+0x58/0x80 LR is at l2cap_skb_msg_name+0x1c/0x4c pc : [<c02c47d8>] lr : [<c0506278>] psr: 00070013 sp : eea71e60 ip : 00000000 fp : 00034e1c r10: 00000000 r9 : 00000000 r8 : eea71ed4 r7 : 000002a0 r6 : eea71ed8 r5 : 00000000 r4 : ee4a5d80 r3 : 00000000 r2 : 00000000 r1 : 0000000e r0 : 00000000 Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 7600806a DAC: 00000051 Process l2test (pid: 326, stack limit = 0xeea70210) Stack: (0xeea71e60 to 0xeea72000) 1e60: ee4a5d80 eeac2800 000002a0 c04d7114 173eefa0 00000000 c06ca68e 00000000 1e80: 00000001 eeac2800 eef23500 00000000 000002a0 eea71ed4 eea70000 c0504d50 1ea0: 00000000 00000000 eef23500 00000000 00000000 c044e8a0 eea71edc eea9f904 1ec0: bef89aa0 fffffff7 00000000 00035008 000002a0 00000000 00000000 00000000 1ee0: 00000000 00000000 eea71ed4 00000000 00000000 00000000 00004000 00000000 1f00: 0000011b c01078c4 eea70000 c044e5e4 00000000 00000000 642f0001 6c2f7665 1f20: 0000676f 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f40: 00000000 00000000 00000000 00000000 00000000 ffffffff 00000001 bef89ad8 1f60: 000000a8 c01078c4 eea70000 00000000 00034e1c c01e6c74 00000000 00000000 1f80: 00034e1c 000341f8 00000000 00000123 c01078c4 c044e90c 00000000 00000000 1fa0: 000002a0 c0107700 00034e1c 000341f8 00000003 00035008 000002a0 00000000 1fc0: 00034e1c 000341f8 00000000 00000123 00000000 00000000 00011ffc 00034e1c 1fe0: 00000000 bef89aa4 0001211c b6eebb60 60070010 00000003 00000000 00000000 [<c02c47d8>] (__memzero) from [<c0506278>] (l2cap_skb_msg_name+0x1c/0x4c) [<c0506278>] (l2cap_skb_msg_name) from [<c04d7114>] (bt_sock_recvmsg+0x128/0x160) [<c04d7114>] (bt_sock_recvmsg) from [<c0504d50>] (l2cap_sock_recvmsg+0x98/0x134) [<c0504d50>] (l2cap_sock_recvmsg) from [<c044e8a0>] (SyS_recvfrom+0x94/0xec) [<c044e8a0>] (SyS_recvfrom) from [<c044e90c>] (SyS_recv+0x14/0x1c) [<c044e90c>] (SyS_recv) from [<c0107700>] (ret_fast_syscall+0x0/0x3c) Code: e3110010 18a0500c e49de004 e3110008 (18a0000c) ---[ end trace 224e35e79fe06b42 ]--- Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btusb: Configure Marvell to use one of the pins for oob wakeupRajat Jain
The Marvell devices may have many gpio pins, and hence for wakeup on these out-of-band pins, the chip needs to be told which pin is to be used for wakeup, using an hci command. Thus, we read the pin number etc from the device tree node and send a command to the chip. Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-02-16Bluetooth: btusb: Add out-of-band wakeup supportRajat Jain
Some onboard BT chips (e.g. Marvell 8997) contain a wakeup pin that can be connected to a gpio on the CPU side, and can be used to wakeup the host out-of-band. This can be useful in situations where the in-band wakeup is not possible or not preferable (e.g. the in-band wakeup may require the USB host controller to remain active, and hence consuming more system power during system sleep). The oob gpio interrupt to be used for wakeup on the CPU side, is read from the device tree node, (using standard interrupt descriptors). A devcie tree binding document is also added for the driver. The compatible string is in compliance with Documentation/devicetree/bindings/usb/usb-device.txt Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit (git 2.34.1) at 2025-09-17 11:33:29 +0000