| Age | Commit message (Collapse) | Author |
|---|
|
When vmxnet3_rq_create() fails to allocate rq->data_ring.base due to page
allocation failure, subsequent call to vmxnet3_rq_rx_complete() can result in
NULL pointer dereference.
To fix this bug, check not only that rxDataRingUsed is true but also that
adapter->rxdataring_enabled is true before calling memcpy() in
vmxnet3_rq_rx_complete().
[1728352.477993] ethtool: page allocation failure: order:9, mode:0x6000c0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
...
[1728352.478009] Call Trace:
[1728352.478028] dump_stack+0x41/0x60
[1728352.478035] warn_alloc.cold.120+0x7b/0x11b
[1728352.478038] ? _cond_resched+0x15/0x30
[1728352.478042] ? __alloc_pages_direct_compact+0x15f/0x170
[1728352.478043] __alloc_pages_slowpath+0xcd3/0xd10
[1728352.478047] __alloc_pages_nodemask+0x2e2/0x320
[1728352.478049] __dma_direct_alloc_pages.constprop.25+0x8a/0x120
[1728352.478053] dma_direct_alloc+0x5a/0x2a0
[1728352.478056] vmxnet3_rq_create.part.57+0x17c/0x1f0 [vmxnet3]
...
[1728352.478188] vmxnet3 0000:0b:00.0 ens192: rx data ring will be disabled
...
[1728352.515347] BUG: unable to handle kernel NULL pointer dereference at 0000000000000034
...
[1728352.515440] RIP: 0010:memcpy_orig+0x54/0x130
...
[1728352.515655] Call Trace:
[1728352.515665] <IRQ>
[1728352.515672] vmxnet3_rq_rx_complete+0x419/0xef0 [vmxnet3]
[1728352.515690] vmxnet3_poll_rx_only+0x31/0xa0 [vmxnet3]
...
Signed-off-by: Seiji Nishikawa <snishika@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tariq Toukan says:
====================
net/mlx5e: Extend XDP multi-buffer capabilities
This series extends the XDP multi-buffer support in the mlx5e driver.
Patchset breakdown:
- Infrastructural changes and preparations.
- Add XDP multi-buffer support for XDP redirect-in.
- Use TX MPWQE (multi-packet WQE) HW feature for non-linear
single-segmented XDP frames.
- Add XDP multi-buffer support for striding RQ.
In Striding RQ, we overcome the lack of headroom and tailroom between
the RQ strides by allocating a side page per packet and using it for the
xdp_buff descriptor. We structure the xdp_buff so that it contains
nothing in the linear part, and the whole packet resides in the
fragments.
Performance highlight:
Packet rate test, 64 bytes, 32 channels, MTU 9000 bytes.
CPU: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz.
NIC: ConnectX-6 Dx, at 100 Gbps.
+----------+-------------+-------------+---------+
| Test | Legacy RQ | Striding RQ | Speedup |
+----------+-------------+-------------+---------+
| XDP_DROP | 101,615,544 | 117,191,020 | +15% |
+----------+-------------+-------------+---------+
| XDP_TX | 95,608,169 | 117,043,422 | +22% |
+----------+-------------+-------------+---------+
Series generated against net commit:
e61caf04b9f8 Merge branch 'page_pool-allow-caching-from-safely-localized-napi'
I'm submitting this directly as Saeed is traveling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here we add support for multi-buffer XDP handling in Striding RQ, which
is our default out-of-the-box RQ type. Before this series, loading such
an XDP program would fail, until you switch to the legacy RQ (by
unsetting the rx_striding_rq priv-flag).
To overcome the lack of headroom and tailroom between the strides, we
allocate a side page to be used for the descriptor (xdp_buff / skb) and
the linear part. When an XDP program is attached, we structure the
xdp_buff so that it contains no data in the linear part, and the whole
packet resides in the fragments.
In case of XDP_PASS, where an SKB still needs to be created, we copy up
to 256 bytes to its linear part, to match the current behavior, and
satisfy functions that assume finding the packet headers in the SKB
linear part (like eth_type_trans).
Performance testing:
Packet rate test, 64 bytes, 32 channels, MTU 9000 bytes.
CPU: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz.
NIC: ConnectX-6 Dx, at 100 Gbps.
+----------+-------------+-------------+---------+
| Test | Legacy RQ | Striding RQ | Speedup |
+----------+-------------+-------------+---------+
| XDP_DROP | 101,615,544 | 117,191,020 | +15% |
+----------+-------------+-------------+---------+
| XDP_TX | 95,608,169 | 117,043,422 | +22% |
+----------+-------------+-------------+---------+
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation for supporting XDP multi-buffer in striding RQ, use
xdp_buff struct to describe the packet. Make its skb_shared_info collide
the one of the allocated SKB, then add the fragments using the xdp_buff
API.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the function more generic. Let it get an additional frame_sz
parameter instead of deriving it from the RQ struct.
No functional change here, just a preparation for a downstream patch.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce mlx5e_add_skb_shared_info_frag(), a function dedicated for
adding a fragment into a struct skb_shared_info object.
Use it in the Legacy RQ flow. Similar usage will be added in a
downstream patch by the corresponding Striding RQ flow.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Under a few restrictions, TX MPWQE feature can serve multiple TX packets
in a single TX descriptor. It requires each of the packets to have a
single scatter entry / segment.
Today we allow only linear frames to use this feature, although there's
no real problem with non-linear ones where the whole packet reside in
the first fragment.
Expand the XDP TX MPWQE feature support to include such frames. This is
in preparation for the downstream patch, in which we will generate such
non-linear frames.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the assumption of non-zero linear length in the XDP xmit
function, used to serve both internal XDP_TX operations as well as
redirected-in requests.
Do not apply the MLX5E_XDP_MIN_INLINE check unless necessary.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
calculations
Function mlx5e_rx_get_linear_stride_sz() returns PAGE_SIZE immediately
in case an XDP program is attached. The more accurate formula is
ALIGN(sz, PAGE_SIZE), to prevent two packets from residing on the same
page.
The assumption behind the current code is that sz <= PAGE_SIZE holds for
all cases with XDP program set.
This is true because it is being called from:
- 3 times from Striding RQ flows, in which XDP is not supported for such
large packets.
- 1 time from Legacy RQ flow, under the condition
mlx5e_rx_is_linear_skb().
No functional change here, just removing the implied assumption in
preparation for supporting XDP multi-buffer in Striding RQ.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change mlx5e_xdp_allowed() so it gets the params structure with the
xdp_prog applied, rather than creating a local copy based on the current
params in priv.
This reduces the amount of memory on the stack, and acts on the exact
params instance that's about to be applied.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Non-linear mem scheme of Striding RQ does not yet support XDP at this
point. Take the check where it belongs, inside the params validation
function mlx5e_params_validate_xdp().
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Handle multi-buffer XDP redirect-in requests coming through
mlx5e_xdp_xmit.
Extend struct mlx5e_xmit_data_frags with an additional dma_arr field, to
point to the fragments dma mapping, as they cannot be retrieved via the
page_pool_get_dma_addr() function.
Push a dma_addr xdpi instance per each fragment, and use them in the
completion flow to dma_unmap the frags.
Finally, remove the restriction in mlx5e_open_xdpsq, and set the flag in
xdp_features.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here we fix the current wi->num_pkts abuse, as it was used to indicate
multiple xdpi entries in the xdpi_fifo.
Instead, reduce mlx5e_xdp_info to the size of a single field, making it
a union of unions. Per packet, use as many instances as needed to
provide the information needed at the time of completion.
The sequence of xdpi instances pushed is well defined, derived by the
xmit_mode.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is not likely nor unlikely that the xdp buff has fragments, it
depends on the program loaded and size of the packet received.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce struct mlx5e_xmit_data_frags to be used for non-linear xmit
buffers. Let it include sinfo pointer.
Take one bit from the len field to indicate if the descriptor has
fragments and can be casted-up into the extended version.
Zero-init to make sure has_frags, and potentially future fields, are
zero when not explicitly assigned.
Another field will be added in a downstream patch to indicate and point
to dma addresses of the different frags, for redirect-in requests.
This simplifies the mlx5e_xmit_xdp_frame/mlx5e_xmit_xdp_frame_mpwqe
functions params.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move TX datapath struct from the generic en.h to the datapath txrx.h
header, where it belongs.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move struct mlx5e_xdp_info and enum mlx5e_xdp_xmit_mode from the generic
en.h to the XDP header, where they belong.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a net device is put administratively up, its 'IFF_UP' flag is set
(if not set already) and a 'NETDEV_UP' notification is emitted, which
causes the 8021q driver to add VLAN ID 0 on the device. The reverse
happens when a net device is put administratively down.
When changing the type of a bond to Ethernet, its 'IFF_UP' flag is
incorrectly cleared, resulting in the kernel skipping the above process
and VLAN ID 0 being leaked [1].
Fix by restoring the flag when changing the type to Ethernet, in a
similar fashion to the restoration of the 'IFF_SLAVE' flag.
The issue can be reproduced using the script in [2], with example out
before and after the fix in [3].
[1]
unreferenced object 0xffff888103479900 (size 256):
comm "ip", pid 329, jiffies 4294775225 (age 28.561s)
hex dump (first 32 bytes):
00 a0 0c 15 81 88 ff ff 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0
[<ffffffff8406426c>] vlan_vid_add+0x30c/0x790
[<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0
[<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0
[<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150
[<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0
[<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180
[<ffffffff8379af36>] do_setlink+0xb96/0x4060
[<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0
[<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0
[<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00
[<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440
[<ffffffff839a738f>] netlink_unicast+0x53f/0x810
[<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90
[<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70
[<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0
unreferenced object 0xffff88810f6a83e0 (size 32):
comm "ip", pid 329, jiffies 4294775225 (age 28.561s)
hex dump (first 32 bytes):
a0 99 47 03 81 88 ff ff a0 99 47 03 81 88 ff ff ..G.......G.....
81 00 00 00 01 00 00 00 cc cc cc cc cc cc cc cc ................
backtrace:
[<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0
[<ffffffff84064369>] vlan_vid_add+0x409/0x790
[<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0
[<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0
[<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150
[<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0
[<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180
[<ffffffff8379af36>] do_setlink+0xb96/0x4060
[<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0
[<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0
[<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00
[<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440
[<ffffffff839a738f>] netlink_unicast+0x53f/0x810
[<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90
[<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70
[<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0
[2]
ip link add name t-nlmon type nlmon
ip link add name t-dummy type dummy
ip link add name t-bond type bond mode active-backup
ip link set dev t-bond up
ip link set dev t-nlmon master t-bond
ip link set dev t-nlmon nomaster
ip link show dev t-bond
ip link set dev t-dummy master t-bond
ip link show dev t-bond
ip link del dev t-bond
ip link del dev t-dummy
ip link del dev t-nlmon
[3]
Before:
12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
link/netlink
12: t-bond: <BROADCAST,MULTICAST,MASTER,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether 46:57:39:a4:46:a2 brd ff:ff:ff:ff:ff:ff
After:
12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
link/netlink
12: t-bond: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether 66:48:7b:74:b6:8a brd ff:ff:ff:ff:ff:ff
Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type")
Fixes: 75c78500ddad ("bonding: remap muticast addresses without using dev_close() and dev_open()")
Fixes: 9ec7eb60dcbc ("bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/netdev/78a8a03b-6070-3e6b-5042-f848dab16fb8@alu.unizg.hr/
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A received TKIP key may be up to 32 bytes because it may contain
MIC rx/tx keys too. These are not used by iwl and copying these
over overflows the iwl_keyinfo.key field.
Add a check to not copy more data to iwl_keyinfo.key then will fit.
This fixes backtraces like this one:
memcpy: detected field-spanning write (size 32) of single field "sta_cmd.key.key" at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 (size 16)
WARNING: CPU: 1 PID: 946 at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 iwlagn_send_sta_key+0x375/0x390 [iwldvm]
<snip>
Hardware name: Dell Inc. Latitude E6430/0H3MT5, BIOS A21 05/08/2017
RIP: 0010:iwlagn_send_sta_key+0x375/0x390 [iwldvm]
<snip>
Call Trace:
<TASK>
iwl_set_dynamic_key+0x1f0/0x220 [iwldvm]
iwlagn_mac_set_key+0x1e4/0x280 [iwldvm]
drv_set_key+0xa4/0x1b0 [mac80211]
ieee80211_key_enable_hw_accel+0xa8/0x2d0 [mac80211]
ieee80211_key_replace+0x22d/0x8e0 [mac80211]
<snip>
Link: https://www.alionet.org/index.php?topic=1469.0
Link: https://lore.kernel.org/linux-wireless/20230218191056.never.374-kees@kernel.org/
Link: https://lore.kernel.org/linux-wireless/68760035-7f75-1b23-e355-bfb758a87d83@redhat.com/
Cc: Kees Cook <keescook@chromium.org>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144734.1546587-1-robh@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144733.1546500-1-robh@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove no more supported platforms (stih415/stih416 and stid127)
Signed-off-by: Alain Volmat <avolmat@me.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230416195523.61075-1-avolmat@me.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The types for the register argument changed recently, but there are
still incompatible prototypes that got left behind, and gcc-13 warns
about these:
In file included from drivers/net/ethernet/mscc/ocelot.c:13:
drivers/net/ethernet/mscc/ocelot.h:97:5: error: conflicting types for 'ocelot_port_readl' due to enum/integer mismatch; have 'u32(struct ocelot_port *, u32)' {aka 'unsigned int(struct ocelot_port *, unsigned int)'} [-Werror=enum-int-mismatch]
97 | u32 ocelot_port_readl(struct ocelot_port *port, u32 reg);
| ^~~~~~~~~~~~~~~~~
Just remove the two prototypes, and rely on the copy in the global
header.
Fixes: 9ecd05794b8d ("net: mscc: ocelot: strengthen type of "u32 reg" in I/O accessors")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230417205531.1880657-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
stmmac_dev_probe doesn't propagate feature flags to VLANs. So features
like offloading don't correspond with the general features and it's not
possible to manipulate features via ethtool -K to affect VLANs.
Propagate feature flags to vlan features. Drop TSO feature because
it does not work on VLANs yet.
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Link: https://lore.kernel.org/r/20230417192845.590034-1-vinschen@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Although __SIZEOF_POINTER__ is equal to _SIZEOF_LONG__ on LoongArch,
it is better to use __SIZEOF_LONG__ to define __BITS_PER_LONG to keep
consistent between arch/loongarch/include/uapi/asm/bitsperlong.h and
tools/arch/loongarch/include/uapi/asm/bitsperlong.h.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
According to LoongArch documentation [1], CSR.PGDL and CSR.PGDH are
concerned with the VA's MSB which is VALEN-1 instead of always being 47.
Fix comments to avoid misleading others.
[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#page-global-directory-base-address-for-lower-half-address-space
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
After commit c78c43fe7d42 ("LoongArch: Use acpi_arch_dma_setup() and
remove ARCH_HAS_PHYS_TO_DMA"), plat_swiotlb_setup() has been deleted,
so clean up the related code.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
We can see the following messages with CONFIG_PROVE_LOCKING=y on
LoongArch:
BUG: MAX_STACK_TRACE_ENTRIES too low!
turning off the locking correctness validator.
This is because stack_trace_save() returns a big value after call
arch_stack_walk(), here is the call trace:
save_trace()
stack_trace_save()
arch_stack_walk()
stack_trace_consume_entry()
arch_stack_walk() should return immediately if unwind_next_frame()
failed, no need to do the useless loops to increase the value of c->len
in stack_trace_consume_entry(), then we can fix the above problem.
Cc: stable@vger.kernel.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/8a44ad71-68d2-4926-892f-72bfc7a67e2a@roeck-us.net/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Ensure that user_watch_state can be set correctly by the user.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This is done in order to easily calculate the number of breakpoints in
hw_break_get()/hw_break_set().
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Currently, bonding only obtain the timestamp (ts) information of
the active slave, which is available only for modes 1, 5, and 6.
For other modes, bonding only has software rx timestamping support.
However, some users who use modes such as LACP also want tx timestamp
support. To address this issue, let's check the ts information of each
slave. If all slaves support tx timestamping, we can enable tx
timestamping support for the bond.
Add a note that the get_ts_info may be called with RCU, or rtnl or
reference on the device in ethtool.h>
Suggested-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20230418034841.2566262-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Unbreak br_netfilter physdev match support, from Florian Westphal.
2) Use GFP_KERNEL_ACCOUNT for stateful/policy objects, from Chen Aotian.
3) Use IS_ENABLED() in nf_reset_trace(), from Florian Westphal.
4) Fix validation of catch-all set element.
5) Tighten requirements for catch-all set elements.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
netfilter: nf_tables: validate catch-all set elements
netfilter: nf_tables: fix ifdef to also consider nf_tables=m
netfilter: nf_tables: Modify nla_memdup's flag to GFP_KERNEL_ACCOUNT
netfilter: br_netfilter: fix recent physdev match breakage
====================
Link: https://lore.kernel.org/r/20230418145048.67270-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Alexandre Ghiti <alexghiti@rivosinc.com> says:
This patchset intends to improve tlb utilization by using hugepages for
the linear mapping.
As reported by Anup in v6, when STRICT_KERNEL_RWX is enabled, we must
take care of isolating the kernel text and rodata so that they are not
mapped with a PUD mapping which would then assign wrong permissions to
the whole region: it is achieved the same way as arm64 by using the
memblock nomap API which isolates those regions and re-merge them afterwards
thus avoiding any issue with the system resources tree creation.
arch/riscv/include/asm/page.h | 19 ++++++-
arch/riscv/mm/init.c | 102 ++++++++++++++++++++++++++--------
arch/riscv/mm/physaddr.c | 16 ++++++
drivers/of/fdt.c | 11 ++--
4 files changed, 118 insertions(+), 30 deletions(-)
* b4-shazam-merge:
riscv: Use PUD/P4D/PGD pages for the linear mapping
riscv: Move the linear mapping creation in its own function
riscv: Get rid of riscv_pfn_base variable
Link: https://lore.kernel.org/r/20230324155421.271544-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
During the early page table creation, we used to set the mapping for
PAGE_OFFSET to the kernel load address: but the kernel load address is
always offseted by PMD_SIZE which makes it impossible to use PUD/P4D/PGD
pages as this physical address is not aligned on PUD/P4D/PGD size (whereas
PAGE_OFFSET is).
But actually we don't have to establish this mapping (ie set va_pa_offset)
that early in the boot process because:
- first, setup_vm installs a temporary kernel mapping and among other
things, discovers the system memory,
- then, setup_vm_final creates the final kernel mapping and takes
advantage of the discovered system memory to create the linear
mapping.
During the first phase, we don't know the start of the system memory and
then until the second phase is finished, we can't use the linear mapping at
all and phys_to_virt/virt_to_phys translations must not be used because it
would result in a different translation from the 'real' one once the final
mapping is installed.
So here we simply delay the initialization of va_pa_offset to after the
system memory discovery. But to make sure noone uses the linear mapping
before, we add some guard in the DEBUG_VIRTUAL config.
Finally we can use PUD/P4D/PGD hugepages when possible, which will result
in a better TLB utilization.
Note that:
- this does not apply to rv32 as the kernel mapping lies in the linear
mapping.
- we rely on the firmware to protect itself using PMP.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Rob Herring <robh@kernel.org> # DT bits
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20230324155421.271544-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
No change intended, it just splits the linear mapping creation from
setup_vm_final: this prepares for upcoming additions to the linear
mapping creation.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20230324155421.271544-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Use directly phys_ram_base instead, riscv_pfn_base is just the pfn of
the address contained in phys_ram_base.
Even if there is no functional change intended in this patch, actually
setting phys_ram_base that early changes the behaviour of
kernel_mapping_pa_to_va during the early boot: phys_ram_base used to be
zero before this patch and now it is set to the physical start address of
the kernel. But it does not break the conversion of a kernel physical
address into a virtual address since kernel_mapping_pa_to_va should only
be used on kernel physical addresses, i.e. addresses greater than the
physical start address of the kernel.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20230324155421.271544-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Other extensions only capitalise the first letter in the text visible
in Kconfig menus, and provide a short comment about the extension's
meaning. Do the same for Svnapot & Svpbmt.
The precedent for capitalisation in the Kconfig text was set by Zicbom
& sorta followed for Zicboz. The RVI styling used for multi-letter
extensions only capitalises the first letter, so do the same here.
If nothing else, my OCD likes it when the extensions follow a consistent
pattern.
While editing one of the lines, reformat the "spelling" of 64-bit.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230405-pucker-cogwheel-3a999a94a2f2@wendy
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
RISC-V now builds the sched domain based on the simple possible map.
Enable SCHED_MC to make the building based on cpu_coregroup_mask()
which also takes care of the NUMA and cores with LLC.
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230310110336.970985-1-suagrfillet@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
RISC-V now manages CPU topology using arch_topology which provides
CPU capacity and frequency related interfaces to access the cpu/freq
invariant in possible heterogeneous or DVFS-enabled platforms.
Here adds topology.h file to export the arch_topology interfaces for
replacing the scheduler's constant-based cpu/freq invariant accounting.
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Ley Foon Tan <lftan@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230323123924.3032174-1-suagrfillet@gmail.com
[Palmer: Fix the whitespace issues.]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Linux SATA support in ipr has always been limited to SATA DVDs. The last
systems that had the option of including a SATA DVD was Power 8, which have
been withdrawn for some time now, so this support can be removed.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20230412174015.114764-1-brking@linux.vnet.ibm.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently scsi_debug_device_reset() does not do much apart from setting the
SDEBUG_UA_POR ("Power on, reset, or bus device reset") flag, which is
eventually passed back to the SCSI midlayer later for a "unit attention"
command.
There is a report that blktest scsi/007 test fails due to commit
1107c7b24ee3 ("scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd").
The problem there is that there are dangling scsi_debug queued commands
when we attempt to remove the driver.
scsi/007 test triggers SCSI EH and attempts to abort a timed-out command.
Function scsi_debug_device_reset() is called as part of the EH, but does
not deal with outstanding erroneous command. Prior to the named commit,
removing the driver caused all dangling queued commands to be stopped -
this should have not been necessary.
Fix by aborting outstanding commands on a scsi_device basis from
scsi_debug_device_reset().
Fixes: 1107c7b24ee3 ("scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd")
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/oe-lkp/202304071111.e762fcbd-yujie.liu@intel.com
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20230416175654.159163-1-john.g.garry@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Evan Green <evan@rivosinc.com> says:
There's been a bunch of off-list discussions about this, including at
Plumbers. The original plan was to do something involving providing an
ISA string to userspace, but ISA strings just aren't sufficient for a
stable ABI any more: in order to parse an ISA string users need the
version of the specifications that the string is written to, the version
of each extension (sometimes at a finer granularity than the RISC-V
releases/versions encode), and the expected use case for the ISA string
(ie, is it a U-mode or M-mode string). That's a lot of complexity to
try and keep ABI compatible and it's probably going to continue to grow,
as even if there's no more complexity in the specifications we'll have
to deal with the various ISA string parsing oddities that end up all
over userspace.
Instead this patch set takes a very different approach and provides a set
of key/value pairs that encode various bits about the system. The big
advantage here is that we can clearly define what these mean so we can
ensure ABI stability, but it also allows us to encode information that's
unlikely to ever appear in an ISA string (see the misaligned access
performance, for example). The resulting interface looks a lot like
what arm64 and x86 do, and will hopefully fit well into something like
ACPI in the future.
The actual user interface is a syscall, with a vDSO function in front of
it. The vDSO function can answer some queries without a syscall at all,
and falls back to the syscall for cases it doesn't have answers to.
Currently we prepopulate it with an array of answers for all keys and
a CPU set of "all CPUs". This can be adjusted as necessary to provide
fast answers to the most common queries.
An example series in glibc exposing this syscall and using it in an
ifunc selector for memcpy can be found at [1].
I was asked about the performance delta between this and something like
sysfs. I created a small test program and ran it on a Nezha D1
Allwinner board. Doing each operation 100000 times and dividing, these
operations take the following amount of time:
- open()+read()+close() of /sys/kernel/cpu_byteorder: 3.8us
- access("/sys/kernel/cpu_byteorder", R_OK): 1.3us
- riscv_hwprobe() vDSO and syscall: .0094us
- riscv_hwprobe() vDSO with no syscall: 0.0091us
These numbers get farther apart if we query multiple keys, as sysfs will
scale linearly with the number of keys, where the dedicated syscall
stays the same. To frame these numbers, I also did a tight
fork/exec/wait loop, which I measured as 4.8ms. So doing 4
open/read/close operations is a delta of about 0.3%, versus a single vDSO
call is a delta of essentially zero.
[1] https://patchwork.ozlabs.org/project/glibc/list/?series=343050
* b4-shazam-merge:
RISC-V: Add hwprobe vDSO function and data
selftests: Test the new RISC-V hwprobe interface
RISC-V: hwprobe: Support probing of misaligned access performance
RISC-V: hwprobe: Add support for RISCV_HWPROBE_BASE_BEHAVIOR_IMA
RISC-V: Add a syscall for HW probing
RISC-V: Move struct riscv_cpuinfo to new header
Link: https://lore.kernel.org/r/20230407231103.2622178-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Reapply the fix from:
30b2b2196d6e ("cifs: do not include page data when checking signature")
that got lost in the iteratorisation of the cifs driver.
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reported-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paulo Alcantara <pc@cjr.nz>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Bharath S M <bharathsm@microsoft.com>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If read() is done in an unbuffered manner, such that, say,
cifs_strict_readv() goes through cifs_user_readv() and thence
__cifs_readv(), it doesn't recognise the EOF and keeps indicating to
userspace that it returning full buffers of data.
This is due to ctx->iter being advanced in cifs_send_async_read() as the
buffer is split up amongst a number of rdata objects. The iterator count
is then used in collect_uncached_read_data() in the non-DIO case to set the
total length read - and thus the return value of sys_read(). But since the
iterator normally gets used up completely during splitting, ctx->total_len
gets overridden to the full amount.
However, prior to that in collect_uncached_read_data(), we've gone through
the list of rdatas and added up the amount of data we actually received
(which we then throw away).
Fix this by removing the bit that overrides the amount read in the non-DIO
case and just going with the total added up in the aforementioned loop.
This was observed by mounting a cifs share with multiple channels, e.g.:
mount //192.168.6.1/test /test/ -o user=shares,pass=...,max_channels=6
and then reading a 1MiB file on the share:
strace cat /xfstest.test/1M >/dev/null
Through strace, the same data can be seen being read again and again.
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
cc: Jérôme Glisse <jglisse@redhat.com>
cc: Long Li <longli@microsoft.com>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Make sure to check device queue mode in the null_validate_conf() and
return error for NULL_Q_RQ as we don't allow legacy I/O path, without
this patch we get OOPs when queue mode is set to 1 from configfs,
following are repro steps :-
modprobe null_blk nr_devices=0
mkdir config/nullb/nullb0
echo 1 > config/nullb/nullb0/memory_backed
echo 4096 > config/nullb/nullb0/blocksize
echo 20480 > config/nullb/nullb0/size
echo 1 > config/nullb/nullb0/queue_mode
echo 1 > config/nullb/nullb0/power
Entering kdb (current=0xffff88810acdd080, pid 2372) on processor 42 Oops: (null)
due to oops @ 0xffffffffc041c329
CPU: 42 PID: 2372 Comm: sh Tainted: G O N 6.3.0-rc5lblk+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:null_add_dev.part.0+0xd9/0x720 [null_blk]
Code: 01 00 00 85 d2 0f 85 a1 03 00 00 48 83 bb 08 01 00 00 00 0f 85 f7 03 00 00 80 bb 62 01 00 00 00 48 8b 75 20 0f 85 6d 02 00 00 <48> 89 6e 60 48 8b 75 20 bf 06 00 00 00 e8 f5 37 2c c1 48 8b 75 20
RSP: 0018:ffffc900052cbde0 EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff88811084d800 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888100042e00
RBP: ffff8881053d8200 R08: ffffc900052cbd68 R09: ffff888105db2000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000002
R13: ffff888104765200 R14: ffff88810eec1748 R15: ffff88810eec1740
FS: 00007fd445fd1740(0000) GS:ffff8897dfc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000060 CR3: 0000000166a00000 CR4: 0000000000350ee0
DR0: ffffffff8437a488 DR1: ffffffff8437a489 DR2: ffffffff8437a48a
DR3: ffffffff8437a48b DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
nullb_device_power_store+0xd1/0x120 [null_blk]
configfs_write_iter+0xb4/0x120
vfs_write+0x2ba/0x3c0
ksys_write+0x5f/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fd4460c57a7
Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007ffd3792a4a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd4460c57a7
RDX: 0000000000000002 RSI: 000055b43c02e4c0 RDI: 0000000000000001
RBP: 000055b43c02e4c0 R08: 000000000000000a R09: 00007fd44615b4e0
R10: 00007fd44615b3e0 R11: 0000000000000246 R12: 0000000000000002
R13: 00007fd446198520 R14: 0000000000000002 R15: 00007fd446198700
</TASK>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Link: https://lore.kernel.org/r/20230416220339.43845-1-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All ublk commands(control, IO) should have taken ioctl command encoding
from the beginning, because ioctl command encoding defines each code
uniquely, so driver can figure out wrong command sent from userspace
easily; 2) it might help security subsystem for audit uring cmd[1].
Unfortunately we didn't do that way, and it could be one lesson for
ublk driver.
So switch to ioctl command encoding now, we still support commands encoded
in old way, but they become legacy definition. Any new command should take
ioctl encoding.
See ublksrv code for switching to ioctl command encoding in [2].
[1] https://lore.kernel.org/io-uring/CAHC9VhSVzujW9LOj5Km80AjU0EfAuukoLrxO6BEfnXeK_s6bAg@mail.gmail.com/
[2] https://github.com/ming1/ubdsrv/commits/ioctl_cmd_encoding
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ken Kurematsu <k.kurematsu@nskint.co.jp>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230418131810.855959-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230310144736.1546972-1-robh@kernel.org
|
|
A multishot timeout submission will repeatedly generate completions with
the IORING_CQE_F_MORE cflag set. Depending on the value of the `off'
field in the submission, these timeouts can either repeat indefinitely
until cancelled (`off' = 0) or for a fixed number of times (`off' > 0).
Only noseq timeouts (i.e. not dependent on the number of I/O
completions) are supported.
An indefinite timer will be cancelled if the CQ ever overflows.
Signed-off-by: David Wei <davidhwei@meta.com>
Link: https://lore.kernel.org/r/20230418225817.1905027-1-davidhwei@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make rsrc nodes independent from rsrd_data, for that we keep ctx and
rsrc type in nodes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4f259abe9cd4eea6a3b4ed83508635218acd3c3f.1681822823.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We only have two rsrc types, buffers and files, replace virtual
callbacks for putting resources down with a switch..case.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/02ca727bf8e5f7f820c2f404e95ae88c8f472930.1681822823.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
