| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- fix up /proc/pid/comm in the execveat(AT_EMPTY_PATH) case (Tycho
Andersen, Kees Cook)
- binfmt_misc: Fix comment typos (Christophe JAILLET)
- move empty argv[0] warning closer to actual logic (Nir Lichtman)
- remove legacy custom binfmt modules autoloading (Nir Lichtman)
- Make sure set_task_comm() always NUL-terminates
- binfmt_flat: Fix integer overflow bug on 32 bit systems (Dan
Carpenter)
- coredump: Do not lock when copying "comm"
- MAINTAINERS: add auxvec.h and set myself as maintainer
* tag 'execve-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_flat: Fix integer overflow bug on 32 bit systems
selftests/exec: add a test for execveat()'s comm
exec: fix up /proc/pid/comm in the execveat(AT_EMPTY_PATH) case
exec: Make sure task->comm is always NUL-terminated
exec: remove legacy custom binfmt modules autoloading
exec: move warning of null argv to be next to the relevant code
fs: binfmt: Fix a typo
MAINTAINERS: exec: Mark Kees as maintainer
MAINTAINERS: exec: Add auxvec.h UAPI
coredump: Do not lock during 'comm' reporting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"User visible changes, features:
- rebuilding of the free space tree at mount time is done in more
transactions, fix potential hangs when the transaction thread is
blocked due to large amount of block groups
- more read IO balancing strategies (experimental config), add two
new ways how to select a device for read if the profiles allow that
(all RAID1*), the current default selects the device by pid which
is good on average but less performant for single reader workloads
- select preferred device for all reads (namely for testing)
- round-robin, balance reads across devices relevant for the
requested IO range
- add encoded write ioctl support to io_uring (read was added in
6.12), basis for writing send stream using that instead of
syscalls, non-blocking mode is not yet implemented
- support FS_IOC_READ_VERITY_METADATA, applications can use the
metadata to do their own verification
- pass inode's i_write_hint to bios, for parity with other
filesystems, ioctls F_GET_RW_HINT/F_SET_RW_HINT
Core:
- in zoned mode: allow to directly reclaim a block group by simply
resetting it, then it can be reused and another block group does
not need to be allocated
- super block validation now also does more comprehensive sys array
validation, adding it to the points where superblock is validated
(post-read, pre-write)
- subpage mode fixes:
- fix double accounting of blocks due to some races
- improved or fixed error handling in a few cases (compression,
delalloc)
- raid stripe tree:
- fix various cases with extent range splitting or deleting
- implement hole punching to extent range
- reduce number of stripe tree lookups during bio submission
- more self-tests
- updated self-tests (delayed refs)
- error handling improvements
- cleanups, refactoring
- remove rest of backref caching infrastructure from relocation,
not needed anymore
- error message updates
- remove unnecessary calls when extent buffer was marked dirty
- unused parameter removal
- code moved to new files
Other code changes: add rb_find_add_cached() to the rb-tree API"
* tag 'for-6.14-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (127 commits)
btrfs: selftests: add a selftest for deleting two out of three extents
btrfs: selftests: add test for punching a hole into 3 RAID stripe-extents
btrfs: selftests: add selftest for punching holes into the RAID stripe extents
btrfs: selftests: test RAID stripe-tree deletion spanning two items
btrfs: selftests: don't split RAID extents in half
btrfs: selftests: check for correct return value of failed lookup
btrfs: don't use btrfs_set_item_key_safe on RAID stripe-extents
btrfs: implement hole punching for RAID stripe extents
btrfs: fix deletion of a range spanning parts two RAID stripe extents
btrfs: fix tail delete of RAID stripe-extents
btrfs: fix front delete range calculation for RAID stripe extents
btrfs: assert RAID stripe-extent length is always greater than 0
btrfs: don't try to delete RAID stripe-extents if we don't need to
btrfs: selftests: correct RAID stripe-tree feature flag setting
btrfs: add io_uring interface for encoded writes
btrfs: remove the unused locked_folio parameter from btrfs_cleanup_ordered_extents()
btrfs: add extra error messages for delalloc range related errors
btrfs: subpage: dump the involved bitmap when ASSERT() failed
btrfs: subpage: fix the bitmap dump of the locked flags
btrfs: do proper folio cleanup when run_delalloc_nocow() failed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- In the quota code, to avoid spurious audit messages, don't call
capable() when quotas are off
- When changing the 'j' flag of an inode, truncate the inode address
space to avoid mixing "buffer head" and "iomap" pages
* tag 'gfs2-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Truncate address space when flipping GFS2_DIF_JDATA flag
gfs2: reorder capability check last
|
|
Kuniyuki Iwashima says:
====================
ipv6: Convert RTM_{NEW,DEL}ADDR and more to per-netns RTNL.
This series converts RTM_NEWADDR/RTM_DELADDR and some more
RTNL users in addrconf.c to per-netns RTNL.
v1: https://lore.kernel.org/20250114080516.46155-1-kuniyu@amazon.com
====================
Link: https://patch.msgid.link/20250115080608.28127-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let's register inet6_rtm_deladdr() with RTNL_FLAG_DOIT_PERNET and
hold rtnl_net_lock() before inet6_addr_del().
Now that inet6_addr_del() is always called under per-netns RTNL.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-12-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let's register inet6_rtm_newaddr() with RTNL_FLAG_DOIT_PERNET
and hold rtnl_net_lock() before __dev_get_by_index().
Now that inet6_addr_add() and inet6_addr_modify() are always
called under per-netns RTNL.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-11-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inet6_addr_add() and inet6_addr_modify() have the same code to validate
IPv6 lifetime that is done under RTNL.
Let's factorise it out to inet6_rtm_newaddr() so that we can validate
the lifetime without RTNL later.
Note that inet6_addr_add() is called from addrconf_add_ifaddr(), but the
lifetime is INFINITY_LIFE_TIME in the path, so expires and flags are 0.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-10-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will convert inet6_rtm_newaddr() to per-netns RTNL.
Except for IFA_F_OPTIMISTIC, cfg.ifa_flags can be set before
__dev_get_by_index().
Let's move ifa_flags setup before __dev_get_by_index() so that
we can set ifa_flags without RTNL.
Also, now it's moved before tb[IFA_CACHEINFO] in preparing for
the next patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inet6_addr_add() is called from inet6_rtm_newaddr() and
addrconf_add_ifaddr().
inet6_addr_add() looks up dev by __dev_get_by_index(), but
it's already done in inet6_rtm_newaddr().
Let's move the 2nd lookup to addrconf_add_ifaddr() and pass
dev to inet6_addr_add().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These functions are called from inet6_ioctl() with a socket's netns
and hold RTNL.
* SIOCSIFADDR : addrconf_add_ifaddr()
* SIOCDIFADDR : addrconf_del_ifaddr()
* SIOCSIFDSTADDR : addrconf_set_dstaddr()
Let's use rtnl_net_lock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
addrconf_init() holds RTNL for blackhole_netdev, which is the global
device in init_net.
addrconf_cleanup() holds RTNL to clean up devices in init_net too.
Let's use rtnl_net_lock(&init_net) there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
addrconf_dad_work() is per-address work and holds RTNL internally.
We can fetch netns as dev_net(ifp->idev->dev).
Let's use rtnl_net_lock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
addrconf_verify_work() is per-netns work to call addrconf_verify_rtnl()
under RTNL.
Let's use rtnl_net_lock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net.ipv6.conf.${DEV}.XXX sysctl are changed under RTNL:
* forwarding
* ignore_routes_with_linkdown
* disable_ipv6
* proxy_ndp
* addr_gen_mode
* stable_secret
* disable_policy
Let's use rtnl_net_lock() there.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will convert rtnl_lock() with rtnl_net_lock(), and we want to
convert __in6_dev_get() too.
__in6_dev_get() uses rcu_dereference_rtnl(), but as written in its
comment, rtnl_dereference() or rcu_dereference() is preferable.
Let's add __in6_dev_get_rtnl_net() that uses rtnl_net_dereference().
We can add the RCU version helper later if needed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115080608.28127-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Split skl_get_plane_caps() into four variants:
skl_plane_caps(), glk_plane_caps(), icl_plane_caps(),
tgl_plane_caps().
Makes it easier to figure out what is actually going on there.
v2: skl_plane_caps() should return u8 not bool
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241010164617.10280-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
The 32-bit Debian kernel 6.12 fails to boot and crashes like this:
init (pid 65): Protection id trap (code 7)
CPU: 0 UID: 0 PID: 65 Comm: init Not tainted 6.12.9 #2
Hardware name: 9000/778/B160L
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001000000000000001111 Not tainted
r00-03 0004000f 110d39d0 109a6558 12974400
r04-07 12a810e0 12a810e0 00000000 12a81144
r08-11 12a81174 00000007 00000000 00000002
r12-15 f8c55c08 0000006c 00000001 f8c55c08
r16-19 00000002 f8c58620 002da3a8 0000004e
r20-23 00001a46 0000000f 10754f84 00000000
r24-27 00000000 00000003 12ae6980 1127b9d0
r28-31 00000000 00000000 12974440 109a6558
sr00-03 00000000 00000000 00000000 00000010
sr04-07 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: 110d39d0 110d39d4
IIR: baadf00d ISR: 00000000 IOR: 110d39d0
CPU: 0 CR30: 128740c0 CR31: 00000000
ORIG_R28: 000003f3
IAOQ[0]: 0x110d39d0
IAOQ[1]: 0x110d39d4
RP(r2): security_sk_free+0x70/0x1a4
Backtrace:
[<10d8c844>] __sk_destruct+0x2bc/0x378
[<10d8e33c>] sk_destruct+0x68/0x8c
[<10d8e3dc>] __sk_free+0x7c/0x148
[<10d8e560>] sk_free+0xb8/0xf0
[<10f6420c>] unix_release_sock+0x3ac/0x50c
[<10f643b8>] unix_release+0x4c/0x7c
[<10d832f8>] __sock_release+0x5c/0xf8
[<10d833b4>] sock_close+0x20/0x44
[<107ba52c>] __fput+0xf8/0x468
[<107baa08>] __fput_sync+0xb4/0xd4
[<107b471c>] sys_close+0x44/0x94
[<10405334>] syscall_exit+0x0/0x10
Bisecting points to this commit which triggers the issue:
commit 417c5643cd67a55f424b203b492082035d0236c3
Author: KP Singh <kpsingh@kernel.org>
Date: Fri Aug 16 17:43:07 2024 +0200
lsm: replace indirect LSM hook calls with static calls
After more analysis it seems that we don't fully implement the static calls
and jump tables yet. Additionally the functions which mark kernel memory
read-only or read-write-executable needs to be further enhanced to be able to
fully support static calls.
Enabling CONFIG_SECURITY_YAMA=y was one possibility to trigger the issue,
although YAMA isn't the reason for the fault.
As a temporary solution disable JUMP_LABEL functionality to
avoid the crashes.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: <stable@vger.kernel.org> # v6.12+
|
|
The vdso linker script is preprocessed on demand.
Adding it to 'targets' is enough to include the .cmd file.
This commit applies the previous change to parisc, which added the
vdso support after commit 887af6d7c99e ("arch: vdso: add vdso linker
script to 'targets' instead of extra-y").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
After commit df542f669307 ("net: stmmac: Switch to zero-copy in
non-XDP RX path"), SKBs are always marked for recycle, it is redundant
to mark SKBs more than once when new frags are appended.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20250117062805.192393-1-0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the xe AUX neutering out from skl_get_plane_caps() into the
caller so that it'll be easier to refactor skl_get_plane_caps()
into a more readable shape. This isn't really hardware specific
anyway, and just some kind of bug/misfeature of xe.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-9-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
Two different models of usb card, the drivers are r8152 and asix. If no
network cable is connected, Speed = 10Mb/s. This problem is repeated in
linux 3.10, 4.19, 5.4, 6.12. This problem also exists on the latest
kernel. Both drivers call mii_ethtool_get_link_ksettings,
but the value of cmd->base.speed in this
function can only be SPEED_1000 or SPEED_100 or SPEED_10.
When the network cable is not connected, set cmd->base.speed
=SPEED_UNKNOWN.
Signed-off-by: Xiangqian Zhang <zhangxiangqian@kylinos.cn>
Link: https://patch.msgid.link/20250117094603.4192594-1-zhangxiangqian@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge cpupower utility updates for 6.14:
- Fix TSC MHz calculation in cpupower (He Rongguang).
- Add install and uninstall options to bindings Makefile and add header
changes for cpufreq.h to SWIG bindings in cpupower (John B. Wyatt IV).
- Add missing residency header changes in cpuidle.h to SWIG bindings in
cpupower (John B. Wyatt IV).
- Add output files to .gitignore and clean them up in "make clean" in
selftests/cpufreq (Li Zhijian).
- Fix cross-compilation in cpupower Makefile (Peng Fan).
- Revise the is_valid flag handling for idle_monitor in the cpupower
utility (wangfushuai).
- Extend and clean up AMD processors support in cpupower (Mario
Limonciello).
* pm-tools:
pm: cpupower: Add missing residency header changes in cpuidle.h to SWIG
pm: cpupower: Add header changes for cpufreq.h to SWIG bindings
pm: cpupower: Add install and uninstall options to bindings makefile
cpupower: Adjust whitespace for amd-pstate specific prints
cpupower: Don't fetch maximum latency when EPP is enabled
cpupower: Add support for showing energy performance preference
cpupower: Don't try to read frequency from hardware when kernel uses aperfmperf
cpupower: Add support for amd-pstate preferred core rankings
cpupower: Add support for parsing 'enabled' or 'disabled' strings from table
cpupower: Remove spurious return statement
cpupower: fix TSC MHz calculation
cpupower: revise is_valid flag handling for idle_monitor
pm: cpupower: Makefile: Fix cross compilation
selftests/cpufreq: gitignore output files and clean them in make clean
|
|
Since dccp and llc makefiles already check sysctl code
compilation with xxx-$(CONFIG_SYSCTL)
we can drop the checks
Signed-off-by: Denis Kirjanov <kirjanov@gmail.com>
Link: https://patch.msgid.link/20250119134254.19250-1-kirjanov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wa_22011186057 (some CCS problem) only affected ADL A-stepping,
which I presume is pre-production hw. Drop the dead code.
Bspec: 54369
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-8-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
TGL+ should no longer need any VT-d scanout workarounds.
Don't apply any.
Not 100% sure whether pre-SNB might also suffer from this. The
workaround did originate on SNB but who knows if it was just
never caught before that. Not that I ever managed to enable
VT-d any older hardware. Last time I tried on my ILK it ate
the disk!
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-7-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
Rename vlv_primary_min_alignment() to vlv_plane_min_alignment()
and use it to replace vlv_sprite_min_alignment() since the
behaviour is now identical when the plane init doesn't set up
any async flips stuff.
Technically VLV/CHV sprites do support async flips, so this
also makes us a bit more future proof if/when we extend async
flip support to more than one plane.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-6-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
1) Unbreak set size settings for rbtree set backend, intervals in
rbtree are represented as two elements, this detailed is leaked
to userspace leading to bogus ENOSPC from control plane.
2) Remove dead code in br_netfilter's br_nf_pre_routing_finish()
due to never matching error when looking up for route,
from Antoine Tenart.
3) Simplify check for device already in use in flowtable,
from Phil Sutter.
4) Three patches to restore interface name field in struct nft_hook
and use it, this is to prepare for wildcard interface support.
From Phil Sutter.
5) Do not remove netdev basechain when last device is gone, this is
for consistency with the flowtable behaviour. This allows for netdev
basechains without devices. Another patch to simplify netdev event
notifier after this update. Also from Phil.
6) Two patches to add missing spinlock when flowtable updates TCP
state flags, from Florian Westphal.
7) Simplify __nf_ct_refresh_acct() by removing skbuff parameter,
also from Florian.
8) Flowtable gc now extends ct timeout for offloaded flow. This
is to address a possible race that leads to handing over flow
to classic path with long ct timeouts.
9) Tear down flow if cached rt_mtu is stale, before this patch,
packet is handed over to classic path but flow entry still remained
in place.
10) Revisit the flowtable teardown strategy, which was originally
designed to release flowtable hardware entries early. Add a new
CLOSING flag that still allows hardware to release entries when
fin/rst is seen, but keeps the flow entry in place when the
TCP connection is closed. Release flow after timeout or when a new
syn packet is seen for TCP reopen scenario.
* tag 'nf-next-25-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: flowtable: add CLOSING state
netfilter: flowtable: teardown flow if cached mtu is stale
netfilter: conntrack: rework offload nf_conn timeout extension logic
netfilter: conntrack: remove skb argument from nf_ct_refresh
netfilter: nft_flow_offload: update tcp state flags under lock
netfilter: nft_flow_offload: clear tcp MAXACK flag before moving to slowpath
netfilter: nf_tables: Simplify chain netdev notifier
netfilter: nf_tables: Tolerate chains with no remaining hooks
netfilter: nf_tables: Compare netdev hooks based on stored name
netfilter: nf_tables: Use stored ifname in netdev hook dumps
netfilter: nf_tables: Store user-defined hook ifname
netfilter: nf_tables: Flowtable hook's pf value never varies
netfilter: br_netfilter: remove unused conditional and dead code
netfilter: nf_tables: fix set size with rbtree backend
====================
Link: https://patch.msgid.link/20250119172051.8261-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Async flips often require bigger alignment that sync flips.
Currently we have HAS_ASYNC_FLIPS() checks strewn about to
inidcate that async flips are generally supported and thus
we want more alignment. Switch that over to using
intel_plane_can_async_flip() so that we can handle these
in a slightly less messy way. Currently we don't have cases
where async flips would require different alignment for
different modifiers on the same plane.
We'll also move the HAS_ASYNC_FLIPS() check to the plane init
code so that we can still use that as a quick way to disable
the async flips workarounds for testing purposes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-5-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
Move the "does this modifier support async flips?" check
to be handled by the platform specific plane code instead
of having a big mess in common code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-4-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
Merge devfreq and OPP (Operating Performance Points) updates for 6.14:
- Clean up the Exynos devfreq driver and devfreq core (Markus Elfring,
Jeongjun Park).
- Minor cleanups and fixes for OPP (Dan Carpenter, Neil Armstrong, Joe
Hattori).
- Implement dev_pm_opp_get_bw() (Neil Armstrong).
- Expose OPP reference counting helpers for Rust (Viresh Kumar).
* pm-devfreq:
PM / devfreq: exynos: remove unused function parameter
PM / devfreq: event: Call of_node_put() only once in devfreq_event_get_edev_by_phandle()
* pm-opp:
PM / OPP: Add reference counting helpers for Rust implementation
OPP: OF: Fix an OF node leak in _opp_add_static_v2()
OPP: fix dev_pm_opp_find_bw_*() when bandwidth table not initialized
OPP: add index check to assert to avoid buffer overflow in _read_freq()
opp: core: Fix off by one in dev_pm_opp_get_bw()
opp: core: implement dev_pm_opp_get_bw
|
|
Apparently ICL can do async flips with CCS. In fact it already
seems to work on GLK, but apparently can lead to underruns there
so we'll only enable it for ICL.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-3-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
Looks like CCS + async flips has been a thing for a while now.
Enable this for TGL+ render compression modifiers.
Note that we can't update AUX_DIST during async flips we must
check to make sure it remains unchanged.
We also can't do clear color. Supposedly there was some attempt
to make it work, but apparently the issues only got ironed out
in MTL. For now we'll not worry about it and refuse async flips
with clear color modifiers.
Bspec claims that media compression doesn't support async flips.
Based on a quick test it does seem to work to some degree, but
perhaps it has issues as well. Let's trust the spec here and
continue to refuse async flips + media compression.
Bspec: 49250,49251,49252,49253
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241009182207.22900-2-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
Jakub Kicinski says:
====================
net: ethtool: fixes for HDS threshold
Quick follow up on the HDS threshold work, since the merge window
is upon us.
Fix the bnxt implementation to apply the settings right away,
because we update the parameters _after_ configuring HW user
needed to reconfig the device twice to get the settings to stick.
For this I took the liberty of moving the config to a separate
struct. This follows my original thinking for the queue API.
It should also fit more neatly into how many drivers which
support safe config update operate. Drivers can allocate
new objects using the "pending" struct.
netdevsim:
KTAP version 1
1..7
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_zero
ok 6 hds.set_hds_thresh_max
ok 7 hds.set_hds_thresh_gt
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
bnxt:
KTAP version 1
1..7
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable # SKIP disabling of HDS not supported by the device
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_zero
ok 6 hds.set_hds_thresh_max
ok 7 hds.set_hds_thresh_gt
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:1 error:0
v1: https://lore.kernel.org/20250117194815.1514410-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250119020518.1962249-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
300-400B RPC requests are fairly common. With the current default
of 256B HDS threshold bnxt ends up splitting those, lowering PCIe
bandwidth efficiency and increasing the number of memory allocation.
Increase the HDS threshold to fit 4 buffers in a 4k page.
This works out to 640B as the threshold on a typical kernel confing.
This change increases the performance for a microbenchmark which
receives 400B RPCs and sends empty responses by 4.5%.
Admittedly this is just a single benchmark, but 256B works out to
just 6 (so 2 more) packets per head page, because shinfo size
dominates the headers.
Now that we use page pool for the header pages I was also tempted
to default rx_copybreak to 0, but in synthetic testing the copybreak
size doesn't seem to make much difference.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we can configure HDS threshold separately from the rx_copybreak
HDS threshold may be higher than rx_copybreak.
We need to make sure that we have enough space for the headers.
Fixes: 6b43673a25c3 ("bnxt_en: add support for hds-thresh ethtool command")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The core has the current HDS config, it can pre-populate the values
for the drivers. While at it, remove the zero-setting in netdevsim.
Zero are the default values since the config is zalloc'ed.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the pending config for hds_thrs. Core will only update the "current"
one after we return success. Without this change 2 reconfigs would be
required for the setting to reach the device.
Fixes: 6b43673a25c3 ("bnxt_en: add support for hds-thresh ethtool command")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Record the pending configuration in net_device struct.
ethtool core duplicates the current config and the specific
handlers (for now just ringparam) can modify it.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For ease of review of the next patch store the dev pointer
on the stack, instead of referring to req_info.dev every time.
No functional changes.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Separate the HDS config from the ethtool state struct.
The HDS config contains just simple parameters, not state.
Having it as a separate struct will make it easier to clone / copy
and also long term potentially make it per-queue.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull afs updates from Christian Brauner:
"Dynamic root improvements:
- Create an /afs/.<cell> mountpoint to match the /afs/<cell>
mountpoint when a cell is created
- Add some more checks on cell names proposed by the user to prevent
dodgy symlink bodies from being created. Also prevent rootcell from
being altered once set to simplify the locking
- Change the handling of /afs/@cell from being a dentry name
substitution at lookup time to making it a symlink to the current
cell name and also provide a /afs/.@cell symlink to point to the
dotted cell mountpoint
Fixes:
- Fix the abort code check in the fallback handling for the
YFS.RemoveFile2 RPC call
- Use call->op->server() for oridnary filesystem RPC calls that have
an operation descriptor instead of call->server()"
* tag 'vfs-6.14-rc1.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Fix the fallback handling for the YFS.RemoveFile2 RPC call
afs: Make /afs/@cell and /afs/.@cell symlinks
afs: Add rootcell checks
afs: Make /afs/.<cell> as well as /afs/<cell> mountpoints
|
|
pci-legacy systems are not using logic_pio to managed PIO
allocations, thus the generic pci_address_to_pio won't work
when PCI_IOBASE is defined.
Override the function to use architecture implementation to
fix the problem.
Cc: stable@vger.kernel.org
Fixes: 4bfb53e7d317 ("mips: add <asm-generic/io.h> including")
Reported-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Closes: https://lore.kernel.org/r/99f75c66-4c2d-45dc-a808-b5ba440c7551@app.fastmail.com/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Merge cpufreq updates for 6.14:
- Use str_enable_disable()-like helpers in cpufreq (Krzysztof
Kozlowski).
- Extend the Apple cpufreq driver to support more SoCs (Hector Martin,
Nick Chan).
- Add new cpufreq driver for Airoha SoCs (Christian Marangi).
- Fix using cpufreq-dt as module (Andreas Kemnade).
- Minor fixes for Sparc, SCMI, and Qcom cpufreq drivers (Ethan Carter
Edwards, Sibi Sankar, Manivannan Sadhasivam).
- Fix the maximum supported frequency computation in the ACPI cpufreq
driver to avoid relying on unfounded assumptions (Gautham Shenoy).
- Fix an amd-pstate driver regression with preferred core rankings not
being used (Mario Limonciello).
- Fix a precision issue with frequency calculation in the amd-pstate
driver (Naresh Solanki).
- Add ftrace event to the amd-pstate driver for active mode (Mario
Limonciello).
- Set default EPP policy on Ryzen processors in amd-pstate (Mario
Limonciello).
- Clean up the amd-pstate cpufreq driver and optimize it to increase
code reuse (Mario Limonciello, Dhananjay Ugwekar).
- Use CPPC to get scaling factors between HWP performance levels and
frequency in the intel_pstate driver and make it stop using a built
-in scaling factor for the Arrow Lake processor (Rafael Wysocki).
- Make intel_pstate initialize epp_policy to CPUFREQ_POLICY_UNKNOWN for
consistency with CPU offline (Christian Loehle).
- Fix superfluous updates caused by need_freq_update in the schedutil
cpufreq governor (Sultan Alsawaf).
* pm-cpufreq: (40 commits)
cpufreq: Use str_enable_disable()-like helpers
cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver
cpufreq: ACPI: Fix max-frequency computation
cpufreq/amd-pstate: Refactor max frequency calculation
cpufreq/amd-pstate: Fix prefcore rankings
cpufreq: sparc: change kzalloc to kcalloc
cpufreq: qcom: Implement clk_ops::determine_rate() for qcom_cpufreq* clocks
cpufreq: qcom: Fix qcom_cpufreq_hw_recalc_rate() to query LUT if LMh IRQ is not available
cpufreq: apple-soc: Add Apple A7-A8X SoC cpufreq support
cpufreq: apple-soc: Set fallback transition latency to APPLE_DVFS_TRANSITION_TIMEOUT
cpufreq: apple-soc: Increase cluster switch timeout to 400us
cpufreq: apple-soc: Use 32-bit read for status register
cpufreq: apple-soc: Allow per-SoC configuration of APPLE_DVFS_CMD_PS1
cpufreq: apple-soc: Drop setting the PS2 field on M2+
dt-bindings: cpufreq: apple,cluster-cpufreq: Add A7-A11, T2 compatibles
dt-bindings: cpufreq: Document support for Airoha EN7581 CPUFreq
cpufreq: fix using cpufreq-dt as module
cpufreq: scmi: Register for limit change notifications
cpufreq: schedutil: Fix superfluous updates caused by need_freq_update
cpufreq: intel_pstate: Use CPUFREQ_POLICY_UNKNOWN
...
|
|
Remove hard-coded strings by using the str_on_off() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Kuniyuki Iwashima says:
====================
af_unix: Set skb drop reason in every kfree_skb() path.
There is a potential user for skb drop reason for AF_UNIX.
This series replaces some kfree_skb() in connect() and
sendmsg() paths and sets skb drop reason for the rest of
kfree_skb() in AF_UNIX.
Link: https://lore.kernel.org/netdev/CAAf2ycmZHti95WaBR3s+L5Epm1q7sXmvZ-EqCK=-oZj=45tOwQ@mail.gmail.com/
v2: https://lore.kernel.org/20250112040810.14145-1-kuniyu@amazon.com/
v1: https://lore.kernel.org/20250110092641.85905-1-kuniyu@amazon.com/
====================
Link: https://patch.msgid.link/20250116053441.5758-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is based on Donald Hunter's patch.
These functions could fail for various reasons, sometimes
triggering kfree_skb().
* unix_stream_connect() : connect()
* unix_stream_sendmsg() : sendmsg()
* queue_oob() : sendmsg(MSG_OOB)
* unix_dgram_sendmsg() : sendmsg()
Such kfree_skb() is tied to the errno of connect() and
sendmsg(), and we need not define skb drop reasons.
Let's use consume_skb() not to churn kfree_skb() events.
Link: https://lore.kernel.org/netdev/eb30b164-7f86-46bf-a5d3-0f8bda5e9398@redhat.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-10-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a follow-up of commit d460b04bc452 ("af_unix: Clean up
error paths in unix_stream_sendmsg().").
If we initialise skb with NULL in unix_stream_sendmsg(), we can
reuse the existing out_pipe label for the SEND_SHUTDOWN check.
Let's rename it and adjust the existing label as out_pipe_lock.
While at it, size and data_len are moved to the while loop scope.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
unix_dgram_disconnected() is called from two places:
1. when a connect()ed socket dis-connect()s or re-connect()s to
another socket
2. when sendmsg() fails because the peer socket that the client
has connect()ed to has been close()d
Then, the client's recv queue is purged to remove all messages from
the old peer socket.
Let's define a new drop reason for that case.
# echo 1 > /sys/kernel/tracing/events/skb/kfree_skb/enable
# python3
>>> from socket import *
>>>
>>> # s1 has a message from s2
>>> s1, s2 = socketpair(AF_UNIX, SOCK_DGRAM)
>>> s2.send(b'hello world')
>>>
>>> # re-connect() drops the message from s2
>>> s3 = socket(AF_UNIX, SOCK_DGRAM)
>>> s3.bind('')
>>> s1.connect(s3.getsockname())
# cat /sys/kernel/tracing/trace_pipe
python3-250 ... kfree_skb: ... location=skb_queue_purge_reason+0xdc/0x110 reason: UNIX_DISCONNECT
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
unix_stream_read_skb() is called when BPF SOCKMAP reads some data
from a socket in the map.
SOCKMAP does not support MSG_OOB, and reading OOB results in a drop.
Let's set drop reasons respectively.
* SOCKET_CLOSE : the socket in SOCKMAP was close()d
* UNIX_SKIP_OOB : OOB was read from the socket in SOCKMAP
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
AF_UNIX SOCK_STREAM socket supports MSG_OOB.
When OOB data is sent to a socket, recv() will break at that point.
If the next recv() does not have MSG_OOB, the normal data following
the OOB data is returned.
Then, the OOB skb is dropped.
Let's define a new drop reason for that case in manage_oob().
# echo 1 > /sys/kernel/tracing/events/skb/kfree_skb/enable
# python3
>>> from socket import *
>>> s1, s2 = socketpair(AF_UNIX)
>>> s1.send(b'a', MSG_OOB)
>>> s1.send(b'b')
>>> s2.recv(2)
b'b'
# cat /sys/kernel/tracing/trace_pipe
...
python3-223 ... kfree_skb: ... location=unix_stream_read_generic+0x59e/0xc20 reason: UNIX_SKIP_OOB
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250116053441.5758-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
