summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-27cpufreq: cpufreq-dt: avoid uninitialized variable warnings:Arnd Bergmann
gcc warns quite a bit about values returned from allocate_resources() in cpufreq-dt.c: cpufreq-dt.c: In function 'cpufreq_init': cpufreq-dt.c:327:6: error: 'cpu_dev' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:197:17: note: 'cpu_dev' was declared here cpufreq-dt.c:376:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:199:14: note: 'cpu_clk' was declared here cpufreq-dt.c: In function 'dt_cpufreq_probe': cpufreq-dt.c:461:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:447:14: note: 'cpu_clk' was declared here The problem is that it's slightly hard for gcc to follow return codes across PTR_ERR() calls. This patch uses explicit assignments to the "ret" variable to make it easier for gcc to verify that the code is actually correct, without the need to add a bogus initialization. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototypeArnd Bergmann
There are two definitions of pxa_cpufreq_change_voltage, with slightly different prototypes after one of them had its argument marked 'const'. Now the other one (for !CONFIG_REGULATOR) produces a harmless warning: drivers/cpufreq/pxa2xx-cpufreq.c: In function 'pxa_set_target': drivers/cpufreq/pxa2xx-cpufreq.c:291:36: warning: passing argument 1 of 'pxa_cpufreq_change_voltage' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); ^ drivers/cpufreq/pxa2xx-cpufreq.c:205:12: note: expected 'struct pxa_freqs *' but argument is of type 'const struct pxa_freqs *' static int pxa_cpufreq_change_voltage(struct pxa_freqs *pxa_freq) ^ This changes the prototype in the same way as the other, which avoids the warning. Fixes: 03c229906311 (cpufreq: pxa: make pxa_freqs arrays const) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.2+ <stable@vger.kernel.org> # 4.2+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27PM: APM_EMULATION does not depend on PMArnd Bergmann
The APM emulation code does multiple things, and some of them depend on PM_SLEEP, while the battery management does not. However, selecting the symbol like SHARPSL_PM does causes a Kconfig warning: warning: (SHARPSL_PM && PMAC_APM_EMU) selects APM_EMULATION which has unmet direct dependencies (PM && SYS_SUPPORTS_APM_EMULATION) From all I can tell, this is completely harmless, and we can simply allow APM_EMULATION to be enabled here, even if PM is not. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27cpufreq: Use list_is_last() to check last entry of the policy listGautham R Shenoy
Currently next_policy() explicitly checks if a policy is the last policy in the cpufreq_policy_list. Use the standard list_is_last primitive instead. Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27cpufreq: Fix NULL reference crash while accessing policy->governor_dataViresh Kumar
There is a race discovered by Juri, where we are able to: - create and read a sysfs file before policy->governor_data is being set to a non NULL value. OR - set policy->governor_data to NULL, and reading a file before being destroyed. And so such a crash is reported: Unable to handle kernel NULL pointer dereference at virtual address 0000000c pgd = edfc8000 [0000000c] *pgd=bfc8c835 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 4 PID: 1730 Comm: cat Not tainted 4.5.0-rc1+ #463 Hardware name: ARM-Versatile Express task: ee8e8480 ti: ee930000 task.ti: ee930000 PC is at show_ignore_nice_load_gov_pol+0x24/0x34 LR is at show+0x4c/0x60 pc : [<c058f1bc>] lr : [<c058ae88>] psr: a0070013 sp : ee931dd0 ip : ee931de0 fp : ee931ddc r10: ee4bc290 r9 : 00001000 r8 : ef2cb000 r7 : ee4bc200 r6 : ef2cb000 r5 : c0af57b0 r4 : ee4bc2e0 r3 : 00000000 r2 : 00000000 r1 : c0928df4 r0 : ef2cb000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: adfc806a DAC: 00000051 Process cat (pid: 1730, stack limit = 0xee930210) Stack: (0xee931dd0 to 0xee932000) 1dc0: ee931dfc ee931de0 c058ae88 c058f1a4 1de0: edce3bc0 c07bfca4 edce3ac0 00001000 ee931e24 ee931e00 c01fcb90 c058ae48 1e00: 00000001 edce3bc0 00000000 00000001 ee931e50 ee8ff480 ee931e34 ee931e28 1e20: c01fb33c c01fcb0c ee931e8c ee931e38 c01a5210 c01fb314 ee931e9c ee931e48 1e40: 00000000 edce3bf0 befe4a00 ee931f78 00000000 00000000 000001e4 00000000 1e60: c00545a8 edce3ac0 00001000 00001000 befe4a00 ee931f78 00000000 00001000 1e80: ee931ed4 ee931e90 c01fbed8 c01a5038 ed085a58 00020000 00000000 00000000 1ea0: c0ad72e4 ee931f78 ee8ff488 ee8ff480 c077f3fc 00001000 befe4a00 ee931f78 1ec0: 00000000 00001000 ee931f44 ee931ed8 c017c328 c01fbdc4 00001000 00000000 1ee0: ee8ff480 00001000 ee931f44 ee931ef8 c017c65c c03deb10 ee931fac ee931f08 1f00: c0009270 c001f290 c0a8d968 ef2cb000 ef2cb000 ee8ff480 00000020 ee8ff480 1f20: ee8ff480 befe4a00 00001000 ee931f78 00000000 00000000 ee931f74 ee931f48 1f40: c017d1ec c017c2f8 c019c724 c019c684 ee8ff480 ee8ff480 00001000 befe4a00 1f60: 00000000 00000000 ee931fa4 ee931f78 c017d2a8 c017d160 00000000 00000000 1f80: 000a9f20 00001000 befe4a00 00000003 c000ffe4 ee930000 00000000 ee931fa8 1fa0: c000fe40 c017d264 000a9f20 00001000 00000003 befe4a00 00001000 00000000 Unable to handle kernel NULL pointer dereference at virtual address 0000000c 1fc0: 000a9f20 00001000 befe4a00 00000003 00000000 00000000 00000003 00000001 pgd = edfc4000 [0000000c] *pgd=bfcac835 1fe0: 00000000 befe49dc 000197f8 b6e35dfc 60070010 00000003 3065b49d 134ac2c9 [<c058f1bc>] (show_ignore_nice_load_gov_pol) from [<c058ae88>] (show+0x4c/0x60) [<c058ae88>] (show) from [<c01fcb90>] (sysfs_kf_seq_show+0x90/0xfc) [<c01fcb90>] (sysfs_kf_seq_show) from [<c01fb33c>] (kernfs_seq_show+0x34/0x38) [<c01fb33c>] (kernfs_seq_show) from [<c01a5210>] (seq_read+0x1e4/0x4e4) [<c01a5210>] (seq_read) from [<c01fbed8>] (kernfs_fop_read+0x120/0x1a0) [<c01fbed8>] (kernfs_fop_read) from [<c017c328>] (__vfs_read+0x3c/0xe0) [<c017c328>] (__vfs_read) from [<c017d1ec>] (vfs_read+0x98/0x104) [<c017d1ec>] (vfs_read) from [<c017d2a8>] (SyS_read+0x50/0x90) [<c017d2a8>] (SyS_read) from [<c000fe40>] (ret_fast_syscall+0x0/0x1c) Code: e5903044 e1a00001 e3081df4 e34c1092 (e593300c) ---[ end trace 5994b9a5111f35ee ]--- Fix that by making sure, policy->governor_data is updated at the right places only. Cc: 4.2+ <stable@vger.kernel.org> # 4.2+ Reported-and-tested-by: Juri Lelli <juri.lelli@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27cpuidle: coupled: remove unused define cpuidle_coupled_lockAnders Roxell
This was found with the -RT patch enabled, but the fix should apply to non-RT also. Used multi_v7_defconfig+PREEMPT_RT_FULL=y and this caused a compilation warning without this fix: ../drivers/cpuidle/coupled.c:122:21: warning: 'cpuidle_coupled_lock' defined but not used [-Wunused-variable] Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27PM / Domains: Fix typo in commentMoritz Fischer
Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27PM / Domains: Fix potential deadlock while adding/removing subdomainsUlf Hansson
We must preserve the same order of how we acquire and release the lock for genpd, as otherwise we may encounter deadlocks. The power on phase of a genpd starts by acquiring its lock. Then it walks the hierarchy of its parent domains to be able to power on these first, as per design of genpd. From a locking perspective this means the locks of the parents becomes acquired after the lock of the subdomain. Let's fix pm_genpd_add|remove_subdomain() to maintain the same order of acquiring/releasing the genpd lock as being applied in the power on/off sequence. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27ASoC: simple-card: don't fail if sysclk setting is not supportedAaro Koskinen
Commit e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk with mclk-fs") added sysclk / SND_SOC_CLOCK_OUT setting, that makes asoc_simple_card_hw_params fail if the operation is not supported, although the intention clearly was to ignore ENOTSUPP. Fix it. The patch fixes audio playback on Kirkwood / OpenRD client, where the following errors are seen: asoc-simple-card sound: ASoC: machine hw_params failed: -524 alsa-lib: /alsa-lib-1.0.28/src/pcm/pcm_hw.c:327:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS failed (-524): Unknown error 524 Fixes: e22579713ae1 ("ASoC: simple card: set cpu-dai sysclk with mclk-fs") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27regmap: mmio: Convert to regmap_bus and fix accessor usageMark Brown
Currently regmap-mmio uses the __raw accessors to read and write from memory. This is not safe as these interact poorly with spinlocks and are not guaranteed to generate emulated instructions on at least ARM where regmap is commonly used. The APIs that are provided all provide some byte swapping so this is difficult to do with the current regmap-mmio implementation which attempts to use the regmap core byte swapping. We can fix this by modernising the MMIO implementation to use reg_read() and reg_write() operations which were added after the API was implemented and pass simple unsigned integers through to the bus, making use of the formatting provided by the I/O accessors using a similar pattern to that used by the core. This will be less efficient for block I/O operations since we now enable and disable any required clocks per register but it is not clear that any users of regmap-mmio actually use block I/O and there is room to optimise later. This removes support for big endian I/O on 64 bit registers since no I/O accessors are provided, no current users were found and support can be added easily once they are available. In addition make the default endianness little endian. This was the behaviour prior to 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) and is the behaviour desired by most existing users, the users have been audited and those that need native endianness converted to request it explicitly. Previously native was documented as the default but due to the byte swapping in the accessors this was not correctly implemented. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio tests and fixes from Michael Tsirkin: "This fixes existing tests broken by barrier rework, and adds some new tests. Plus, there's a fix for an old bug in virtio-pci" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: tools/virtio: add ringtest utilities sh: fix smp_store_mb for !SMP tools/virtio: use virt_xxx barriers virtio_pci: fix use after free on release
2016-01-27Revert "MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() ↵Ralf Baechle
function" This reverts commit 5bdb102b3f9785cb88467bc7c75fa0f5cacc8dc5. Brian Norris <computersforpeace@gmail.com> is reporting: Ralf, Please revert this and send it to Linus (or else, I can send it myself). This is causing build failures, because I didn't take the rest of Simon's series yet. drivers/mtd/bcm63xxpart.c: In function 'bcm63xx_parse_cfe_partitions': drivers/mtd/bcm63xxpart.c:93:2: error: implicit declaration of function 'bcm63xx_nvram_get_psi_size' [-Werror=implicit-function-declaration] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> References: https://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20160126191607.GA111152%40google.com
2016-01-27Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The main thing here is to get us booting under qemu again after it turned out that not all of the PMU registers are emulated there, causing us to die early in boot. - Ensure we don't access PMU registers of the PMU is not implemented (fixes booting under QEMU) - Fix BUG_ON triggered during module loading with DEBUG_SET_MODULE_RONX - Ensure the kasan zero page is read-only - Hide __efistub_ symbol aliases from kallsyms, since they otherwise confuse the backtrace code - Ensure !PTE_WRITE kernel ptes are marked as read-only - defconfig updates based on requests and patches on the list - Other minor fixes (typos, build system)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: avoid calling apply_to_page_range on empty range arm64: defconfig: updates for 4.5 arm64: errata: Add -mpc-relative-literal-loads to build flags Eliminate the .eh_frame sections from the aarch64 vmlinux and kernel modules arm64: Fix an enum typo in mm/dump.c arm64: Honour !PTE_WRITE in set_pte_at() for kernel mappings arm64: kernel: fix architected PMU registers unconditional access arm64: kasan: ensure that the KASAN zero page is mapped read-only arm64: hide __efistub_ aliases from kallsyms
2016-01-27component: Detach components when deleting master structJon Medhurst (Tixy)
component_master_add_with_match calls find_components which, if any components already exist, it attaches to the master struct. However, if we later encounter an error the master struct is deleted, leaving components with a dangling pointer to it. If the error was a temporary one, e.g. for probe deferral, then when the master device is re-probed, it will fail to find the required components as they appear to already be attached to a master. Fix this by nulling components pointers to the master struct when it is deleted. This code is factored out into a separate function so it can be shared with component_master_del. Signed-off-by: Jon Medhurst <tixy@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-01-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "s390 and POWER bug fixes, plus enabling the KVM-VFIO interface on s390" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM doc: Fix KVM_SMI chapter number KVM: s390: fix memory overwrites when vx is disabled KVM: s390: Enable the KVM-VFIO device KVM: s390: fix guest fprs memory leak KVM: PPC: Fix ONE_REG AltiVec support KVM: PPC: Increase memslots to 512 KVM: PPC: Book3S PR: Remove unused variable 'vcpu_book3s' KVM: PPC: Fix emulation of H_SET_DABR/X on POWER8 KVM: PPC: Book3S HV: Handle unexpected traps in guest entry/exit code better
2016-01-27mailmap: redirect inactive address <ao2@amarulasolutions.com>Antonio Ospite
The email address <ao2@amarulasolutions.com> is not active anymore, use Antonio's personal email address <ao2@ao2.it> in case someone wants to get in touch for the code wrote for Amarula Solutions. Signed-off-by: Antonio Ospite <ao2@ao2.it> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-27MIPS: dt: Explicitly specify native endian behaviour for sysconMark Brown
On many MIPS systems the endianness of IP blocks is kept the same as that of the CPU by the hardware. This includes the system controllers on these systems which are controlled via syscon which uses the regmap API which used readl() and writel() to interact with the hardware, meaning that all writes are converted to little endian when writing to the hardware. This caused a bad interaction with the regmap core in big endian mode since it was not aware of the byte swapping and so ended up performing little endian writes. Unfortunately when this issue was noticed it was addressed by updating the DT for the affected devices to specify them as little endian. This happened to work since it resulted in two endianness swaps which cancelled each other out and gave little endian behaviour but meant that the DT was clearly not accurately describing the hardware. The intention of commit 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) was to fix this by making regmap default to native endianness but this breaks most other MMIO users where the hardware has a fixed endianness and the implementation uses the __raw accessors which are not intended to be used outside of architecture code. Instead use the newly added native-endian DT property to say exactly what we want for these systems. Fixes: 29bb45f25ff305 (regmap-mmio: Use native endianness for read/write) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-27regmap: Add explict native endian flag to DT bindingsMark Brown
Currently the binding document says that if no endianness is configured we use native endian but this is not in fact true for all binding types and we do have some devices that really want native endianness such as Broadcom MIPS SoCs where switching the endianness of the CPU also switches the endianness of external IPs. Provide an explicit option for this. Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27vfio/noiommu: Don't use iommu_present() to track fake groupsAlex Williamson
Using iommu_present() to determine whether an IOMMU group is real or fake has some problems. First, apparently Power systems don't register an IOMMU on the device bus, so the groups and containers get marked as noiommu and then won't bind to their actual IOMMU driver. Second, I expect we'll run into the same issue as we try to support vGPUs through vfio, since they're likely to emulate this behavior of creating an IOMMU group on a virtual device and then providing a vfio IOMMU backend tailored to the sort of isolation they provide, which won't necessarily be fully compatible with the IOMMU API. The solution here is to use the existing iommudata interface to IOMMU groups, which allows us to easily identify the fake groups we've created for noiommu purposes. The iommudata we set is purely arbitrary since we're only comparing the address, so we use the address of the noiommu switch itself. Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by: Anatoly Burakov <anatoly.burakov@intel.com> Tested-by: Santosh Shukla <sshukla@mvista.com> Fixes: 03a76b60f8ba ("vfio: Include No-IOMMU mode") Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-01-27ARM: wire up copy_file_range() syscallRussell King
Add the copy_file_range() syscall to ARM. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-01-27drm/radeon: fix DP audio support for APU with DCE4.1 display engineSlava Grigorev
Properly setup the DFS divider for DP audio for DCE4.1. Signed-off-by: Slava Grigorev <slava.grigorev@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-01-27drm/radeon: Add a common function for DFS handlingSlava Grigorev
Move encoding of DFS (digital frequency synthesizer) divider into a separate function and improve calculation precision. Signed-off-by: Slava Grigorev <slava.grigorev@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-01-27drm/radeon: cleaned up VCO output settings for DP audioSlava Grigorev
This is preparation for the fixes in the following patches. Signed-off-by: Slava Grigorev <slava.grigorev@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-01-27ARM: dts: am57xx: sbc-am57x: correct Eth PHY settingsDmitry Lifshitz
Update Eth PHY settings to make it possible to run both phys at 1Gbps. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmuxDmitry Lifshitz
Fix CPSW EMAC pinmux Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: am57xx: sbc-am57x: fix UART3 pinmuxDmitry Lifshitz
Fix UART3 pinmux. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequencyDmitry Lifshitz
On-board SPI flash cat act at 48Mhz SPI bus frequency. Update the DT frequency property. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2Dmitry Lifshitz
Setup USB2 to act in "HOST" mode by default. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C addressDmitry Lifshitz
Fix SB-SOM EEPROM I2C address Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: LogicPD Torpedo: Revert Duplicative EntriesAdam Ford
Revert commit 7cd6ca770d1b ("ARM: dts: Change I2C2 and I2C3 to 400KHz for LogicPD Torpedo DM3730 devkit") It was already done and it is just a duplicate. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: am437x: pixcir_tangoc: use correct flags for irq typesGrygorii Strashko
Now IRQs for Pixcir Tangoc touchscreen are defined using IRQ_TYPE_NONE in am437x-gp-evm.dts and am43x-epos-evm.dts wich do not correspond HW. Hence, update am437x-gp-evm.dts and am43x-epos-evm.dts files and use correct flag IRQ_TYPE_EDGE_FALLING for irq types. While here, remove duplicated irq declaration for pixcir_ts@5c node in am437x-gp-evm.dts. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27ARM: dts: am4372: fix irq type for arm twd and global timerGrygorii Strashko
As per ARM documentation PPI(0) ID27 - global timer interrupt is rising-edge sensitive. PPI(2) ID29 - twd interrupt is rising-edge sensitive. and the same is proved by GIC distributor register value GIC_DIST_CONFIG(0xC04) = 0x7DC00000. Hence, set IRQ triggering type to IRQ_TYPE_EDGE_RISING for ARM TWD and Global timers. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27drm/amd/powerplay: Update SMU firmware loading for StoneyRex Zhu
Fix firmware init on Stoney when powerplay is enabled. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-27Bluetooth: Add missing COMPATIBLE_IOCTL for UART line disciplineMarcel Holtmann
The HCIUARTGETDEVICE, HCIUARTSETFLAGS and HCIUARTGETFLAGS ioctl are missing the COMPATIBLE_IOCTL declaration. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-01-27seccomp: always propagate NO_NEW_PRIVS on tsyncJann Horn
Before this patch, a process with some permissive seccomp filter that was applied by root without NO_NEW_PRIVS was able to add more filters to itself without setting NO_NEW_PRIVS by setting the new filter from a throwaway thread with NO_NEW_PRIVS. Signed-off-by: Jann Horn <jann@thejh.net> Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2016-01-27btrfs: don't use GFP_HIGHMEM for free-space-tree bitmap kzallocChris Mason
This was copied incorrectly from the __vmalloc call. Signed-off-by: Chris Mason <clm@fb.com>
2016-01-27debugobjects: Allow bigger number of early boot objectsChristian Borntraeger
On my bigger s390 systems I always get "Out of memory. ODEBUG disabled". Since the number of objects is needed at compile time, we can not change the size dynamically before the caches etc are available. Doubling the size seems to do the trick. Since it is init data it will be freed anyway, this should be ok. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Link: http://lkml.kernel.org/r/1453905478-13409-1-git-send-email-borntraeger@de.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-27include/linux/cleancache.h: Clean up codeChen Gang
Let cleancache_fs_enabled() call cleancache_fs_enabled_mapping() directly. Remove redundant variable ret in cleancache_get_page(). Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2016-01-27cleancache: constify cleancache_ops structureJulia Lawall
The cleancache_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2016-01-27Merge branch 'dev/fst-followup' of ↵Chris Mason
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5
2016-01-27btrfs: sysfs: check initialization state before updating featuresDavid Sterba
If the mount phase is not finished, we can't update the sysfs files. Reported-by: Chris Mason <clm@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2016-01-27ASoC: mxs-saif: fix clk_prepare() without matching clk_unprepare()Mans Rullgard
The clk_prepare() call in hw_params() has no matching clk_unprepare(), leaving the clk with an ever-increasing prepare count. Moreover, hw_params() can be called multiple times which would again leave us with a runaway prepare count. Fix this by moving the clk_prepare() call to the startup() function and adding a shutdown() function with a matching clk_unprepare() as these operations are already correctly bracketed by soc-core. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27pinctrl: pxa: export pxa2xx_pinctrl_init()Masahiro Yamada
Building pinctrl-pxa27x.c as a module causes a link error: ERROR: "pxa2xx_pinctrl_init" [drivers/pinctrl/pxa/pinctrl-pxa27x.ko] undefined! Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-27crypto: shash - Fix has_key settingHerbert Xu
The has_key logic is wrong for shash algorithms as they always have a setkey function. So we should instead be testing against shash_no_setkey. Fixes: a5596d633278 ("crypto: hash - Add crypto_ahash_has_setkey") Cc: stable@vger.kernel.org Reported-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Stephan Mueller <smueller@chronox.de>
2016-01-27Merge tag 'iwlwifi-for-kalle-2016-01-26_2' of ↵Kalle Valo
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * Fix support for 3168 device + NVM version + firmware file name + device IDs * Fix a compilation warning in dvm calibration code * Fix the TPC (reduced Tx Power) code. This fixes performance issues * Device IDs for 8265
2016-01-27irqchip/atmel-aic: Fix wrong bit operation for IRQ priorityMilo Kim
Atmel AIC has common structure for SMR (Source Mode Register). bit[6:5] Interrupt source type bit[2:0] Priority level Other bits are unused. To update new priority value, bit[2:0] should be cleared first and then new priority level can be written. However, aic_common_set_priority() helper clears source type bits instead of priority bits. This patch fixes wrong mask bit operation. Fixes: b1479ebb7720 "irqchip: atmel-aic: Add atmel AIC/AIC5 drivers" Signed-off-by: Milo Kim <milo.kim@ti.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Nicholas Ferre <nicolas.ferre@atmel.com> Cc: stable@vger.kernel.org #v3.17+ Link: http://lkml.kernel.org/r/1452669592-3401-2-git-send-email-milo.kim@ti.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-27tick/nohz: Set the correct expiry when switching to nohz/lowres modeWanpeng Li
commit 0ff53d096422 sets the next tick interrupt to the last jiffies update, i.e. in the past, because the forward operation is invoked before the set operation. There is no resulting damage (yet), but we get an extra pointless tick interrupt. Revert the order so we get the next tick interrupt in the future. Fixes: commit 0ff53d096422 "tick: sched: Force tick interrupt and get rid of softirq magic" Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1453893967-3458-1-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-27ASoC: imx-spdif: Fix crash on suspendLars-Peter Clausen
When registering a ASoC card the driver data of the parent device is set to point to the card. This driver data is used in the snd_soc_suspend()/resume() callbacks. The imx-spdif driver overwrites the driver data with custom data which causes snd_soc_suspend() to crash. Since the custom driver is not used anywhere simply deleting the line which sets the custom driver data fixes the issue. Fixes: 43ac946922b3 ("ASoC: imx-spdif: add snd_soc_pm_ops for spdif machine driver") Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ typeNicolas Ferre
For phy0 KSZ8081, the type of GPIO IRQ should be "level low" instead of "edge falling". Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Fixes: 38153a017896 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board") Cc: <stable@vger.kernel.org> # 4.1+
2016-01-27ARM: dts: at91: sama5d4 xplained: properly mux phy interruptAlexandre Belloni
No interrupt were received from the phy because PIOE 1 may not be properly muxed. It prevented proper link detection, especially since commit 321beec5047a ("net: phy: Use interrupts when available in NOLINK state") disables polling. Cc: <stable@vger.kernel.org> # 4.4 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
generated by cgit (git 2.34.1) at 2025-09-16 11:08:37 +0000