summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-03-19USB: EHCI: fix ITD list orderClemens Ladisch
When isochronous URBs are shorter than one frame and when more than one ITD in a frame has been completed before the interrupt can be handled, scan_periodic() completes the URBs in the order in which they are found in the descriptor list. Therefore, the descriptor list must contain the ITDs in the correct order, i.e., a new ITD must be linked in after any previous ITDs of the same endpoint. This should fix garbled capture data in the USB audio drivers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-by: Colin Fletcher <colin.m.fletcher@googlemail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: Option: Add support for a variant of DLink DWM 652 U5Huang Ying
I found a DLink DWM 652 U5 USB 3G modem has product ID 0xce1e instead of orignal 0xce16. The new ID is added. And I found there are two entries for 0xce16, one has raw number, the other has symbol DLINK_PRODUCT_DWM_652_U5. This is fixed too. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: unusual_devs.h: Fix capacity for SL11R-IDE 2.6cOndrej Zary
SL11R-IDE 2.6c (at least) reports wrong capacity (one sector more). Reading that last sector causes the device not to work anymore (and looks like HAL or something does that automatically after plugging in): sd 5:0:0:0: [sdc] Device not ready sd 5:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x08 sd 5:0:0:0: [sdc] Sense Key : 0x2 [current] sd 5:0:0:0: [sdc] ASC=0x0 ASCQ=0x0 sd 5:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 04 a8 b5 70 00 00 01 00 Add unusual_devs entry to fix the capacity. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: serial: use port endpoint size to determine if ep is availableJohan Hovold
It is possible to have a multi-port device with a port lacking an in or out bulk endpoint. Only checking for num_bulk_in or num_bulk_out is thus not sufficient to determine whether a specific port has an in or out bulk endpoint. This fixes potential null pointer dereferences in the generic open and write routines, as well as access to uninitialised fifo in write_room and chars_in_buffer. Also let write fail with ENODEV (instead of 0) on missing out endpoint (also on zero-length writes). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: serial: fix softint not being called on errorsJohan Hovold
Make sure usb_serial_port_softint is called on errors also when using multi urb writes. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: serial: fix error message on close in generic driverJohan Hovold
Resubmitting read urb fails with -EPERM if completion handler runs while urb is being killed on close. This should not be reported as an error. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19USB: fix usbfs regressionAlan Stern
This patch (as1352) fixes a bug in the way isochronous input data is returned to userspace for usbfs transfers. The entire buffer must be copied, not just the first actual_length bytes, because the individual packets will be discontiguous if any of them are short. Reported-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19tty_port,usb-console: Fix usb serial console open/close regressionJason Wessel
Commit e1108a63e10d344284011cccc06328b2cd3e5da3 ("usb_serial: Use the shutdown() operation") breaks the ability to use a usb console starting in 2.6.33. This was observed when using console=ttyUSB0,115200 as a boot argument with an FTDI device. The error is: ftdi_sio ttyUSB0: ftdi_submit_read_urb - failed submitting read urb, error -22 The handling of the ASYNCB_INITIALIZED changed in 2.6.32 such that in tty_port_shutdown() it always clears the flag if it is set. The fix is to add a variable to the tty_port struct to indicate when the tty port is a console. CC: Alan Cox <alan@linux.intel.com> CC: Alan Stern <stern@rowland.harvard.edu> CC: Oliver Neukum <oliver@neukum.org> CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19tty: cpm_uart: use resource_size()Tobias Klauser
Use the resource_size function instead of manually calculating the resource size. This reduces the chance of introducing off-by-one errors. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19tty_buffer: Fix distinct type warningFang Wenqi
CC drivers/char/tty_buffer.o drivers/char/tty_buffer.c: In function ‘tty_insert_flip_string_fixed_flag’: drivers/char/tty_buffer.c:251: warning: comparison of distinct pointer types lacks a cast drivers/char/tty_buffer.c: In function ‘tty_insert_flip_string_flags’: drivers/char/tty_buffer.c:288: warning: comparison of distinct pointer types lacks a cast Fix it by replacing min() with min_t() in tty_insert_flip_string_flags and tty_insert_flip_string_fixed_flag(). Signed-off-by: Fang Wenqi <antonf@turbolinux.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19hvc_console: Fix race between hvc_close and hvc_removeAmit Shah
Alan pointed out a race in the code where hvc_remove is invoked. The recent virtio_console work is the first user of hvc_remove(). Alan describes it thus: The hvc_console assumes that a close and remove call can't occur at the same time. In addition tty_hangup(tty) is problematic as tty_hangup is asynchronous itself.... So this can happen hvc_close hvc_remove hung up ? - no lock tty = hp->tty unlock lock hp->tty = NULL unlock notify del kref_put the hvc struct close completes tty is destroyed tty_hangup dead tty tty->ops will be NULL NULL->... This patch adds some tty krefs and also converts to using tty_vhangup(). Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Amit Shah <amit.shah@redhat.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linuxppc-dev@ozlabs.org CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19uartlite: Fix build on sparc.David Miller
We can get this driver enabled via MFD_TIMBERDALE which only requires GPIO to be on. But the of_address_to_resource() function is only present on powerpc and microblaze, so we have to conditionalize the CONFIG_OF probing bits on that. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19tty: Take a 256 byte padding into account when buffering below sub-page unitsMel Gorman
The TTY layer takes some care to ensure that only sub-page allocations are made with interrupts disabled. It does this by setting a goal of "TTY_BUFFER_PAGE" to allocate. Unfortunately, while TTY_BUFFER_PAGE takes the size of tty_buffer into account, it fails to account that tty_buffer_find() rounds the buffer size out to the next 256 byte boundary before adding on the size of the tty_buffer. This patch adjusts the TTY_BUFFER_PAGE calculation to take into account the size of the tty_buffer and the padding. Once applied, tty_buffer_alloc() should not require high-order allocations. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require ↵Greg Kroah-Hartman
a VT_RELDISP ioctl call" This reverts commit eec9fe7d1ab4a0dfac4cb43047a7657fffd0002f. Ari writes as the reason this should be reverted: The problems with this patch include: 1. There's at least one subtlety I overlooked - switching between X servers (i.e. from one X VT to another) still requires the cooperation of both X servers. I was assuming that KMS eliminated this. 2. It hasn't been tested at all (no X server patch exists which uses the new mode). As he was the original author of the patch, I'll revert it. Cc: Ari Entlich <atrigent@ccs.neu.edu> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19driver core: numa: fix BUILD_BUG_ON for node_read_distanceDavid Rientjes
node_read_distance() has a BUILD_BUG_ON() to prevent buffer overruns when the number of nodes printed will exceed the buffer length. Each node only needs four chars: three for distance (maximum distance is 255) and one for a seperating space or a trailing newline. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19driver-core: document ERR_PTR() return valuesJani Nikula
A number of functions in the driver core return ERR_PTR() values on error. Document this in the kernel-doc of the functions. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19kobject: documentation: Update to refer to kset-example.c.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19sysdev: the cpu probe/release attributes should be sysdev_class_attributesStephen Rothwell
This fixes these warnings: drivers/base/cpu.c:264: warning: initialization from incompatible pointer type drivers/base/cpu.c:265: warning: initialization from incompatible pointer type Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19kobject: documentation: Fix erroneous example in kobject doc.Robert P. J. Day
Replace uio_mem example for kobjects with uio_map, since the uio_mem struct no longer contains a kobject. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19driver-core: fix missing kernel-doc in firmware_classRandy Dunlap
Fix kernel-doc warning in firmware_class.c: Warning(drivers/base/firmware_class.c:94): No description found for parameter 'attr' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19Driver core: Early platform kernel-doc updateMagnus Damm
This patch updates the kernel-doc notation for early platform functions. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19sysfs: fix sysfs lockdep warning in mlx4 codeGreg Kroah-Hartman
This fixes a sysfs lockdep warning in the mlx4 code. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19sysfs: fix sysfs lockdep warning in infiniband codeGreg Kroah-Hartman
This fixes a sysfs lockdep warning in the infiniband code. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19sysfs: fix sysfs lockdep warning in ipmi codeGreg Kroah-Hartman
This fixes a sysfs lockdep warning in the ipmi code. Thanks to Eric Biederman and Yinghai Lu for the original versions of the patch, unfortunatly they did not submit them in a form they could be applied in. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19sysfs: Initialised pci bus legacy_mem field before useMel Gorman
PPC64 is failing to boot the latest mmotm due to an uninitialised pointer in pci_create_legacy_files(). The surprise is that machines boot at all and it would appear to affect current mainline as well. This patch fixes the problem. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19sysfs: use sysfs_bin_attr_init in firmware class driverJiri Kosina
Annotate dynamic sysfs attribute in fw_setup_device(). This gets rid of the following lockdep warning: bnx2 0000:08:00.0: firmware: requesting bnx2/bnx2-mips-06-5.0.0.j6.fw BUG: key ffff880008293470 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2706 lockdep_init_map+0x562/0x620() Modules linked in: bnx2(+) sg tpm_bios floppy rtc_lib usb_storage i2c_piix4 joydev button container shpchp i2c_core sr_mod cdrom pci_hotplug usbhid hid ohci_hcd ehci_hcd sd_mod usbcore edd ext3 mbcache jbd fan ata_generic sata_svw pata_serverworks libata scsi_mod thermal processor Pid: 1915, comm: work_for_cpu Not tainted 2.6.34-rc1-default #81 Call Trace: [<ffffffff8107c1d2>] ? lockdep_init_map+0x562/0x620 [<ffffffff81049fd8>] warn_slowpath_common+0x78/0xd0 [<ffffffff8104a03f>] warn_slowpath_null+0xf/0x20 [<ffffffff8107c1d2>] lockdep_init_map+0x562/0x620 [<ffffffff8117a236>] ? sysfs_new_dirent+0x76/0x120 [<ffffffff8126edb2>] ? put_device+0x12/0x20 [<ffffffff811797cc>] sysfs_add_file_mode+0x6c/0xd0 [<ffffffff8117983c>] sysfs_add_file+0xc/0x10 [<ffffffff8117bf61>] sysfs_create_bin_file+0x21/0x30 [<ffffffff81279c61>] _request_firmware+0x2f1/0x650 [<ffffffff8127a04e>] request_firmware+0xe/0x10 [<ffffffffa01ec19e>] bnx2_init_one+0x8f5/0x177e [bnx2] [<ffffffff81389eab>] ? _raw_spin_unlock_irq+0x2b/0x40 [<ffffffff81040ed9>] ? finish_task_switch+0x69/0x100 [<ffffffff81040e70>] ? finish_task_switch+0x0/0x100 [<ffffffff81064b40>] ? do_work_for_cpu+0x0/0x30 [<ffffffff811e6302>] local_pci_probe+0x12/0x20 [<ffffffff81064b53>] do_work_for_cpu+0x13/0x30 [<ffffffff81064b40>] ? do_work_for_cpu+0x0/0x30 [<ffffffff81068c56>] kthread+0x96/0xa0 [<ffffffff81003e64>] kernel_thread_helper+0x4/0x10 [<ffffffff8138a350>] ? restore_args+0x0/0x30 [<ffffffff81068bc0>] ? kthread+0x0/0xa0 [<ffffffff81003e60>] ? kernel_thread_helper+0x0/0x10 ---[ end trace a2ecee9c9602d195 ]--- Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-19ASoC: Bail out of wm_hubs DC servo if calibration failsMark Brown
We're keeping track of the number of times we've iterated but never actually using this to bail out if the chip looks stuck. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-19ASoC: tlv320dac33: Internal clocking changesPeter Ujfalusi
During validation of the internal clocking setup it has been found that the following settings were not configured in an optimal way: ASRC_CTRL_A: SRCLKDIV was incorrect, instad of divide ratio 3, ratio of 2 has to be used (as the comment stated) DAC_CTRL_A: Fs = Fsref is the desired configuration instead of Fs = Fsref / 1.5 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19ASoC: tlv320dac33: Fix DSP modesPeter Ujfalusi
To make DSP_A mode working correctly the data delay should be configured to 0. DSP_B mode thus can not be used with DAC33, so remove it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19powerpc: Remove IOMMU_VMERGE config optionFUJITA Tomonori
The description says: Cause IO segments sent to a device for DMA to be merged virtually by the IOMMU when they happen to have been allocated contiguously. This doesn't add pressure to the IOMMU allocator. However, some drivers don't support getting large merged segments coming back from *_map_sg(). Most drivers don't have this problem; it is safe to say Y here. It's out of date. Long ago, drivers didn't have a way to tell IOMMUs about their segment length limit (that is, the maximum segment length that they can handle). So IOMMUs merged as many segments as possible and gave too large segments to drivers. dma_get_max_seg_size() was introduced to solve the above problem. Device drives can use the API to tell IOMMU about the maximum segment length that they can handle. In addition, the default limit (64K) should be safe for everyone. So this config option seems to be unnecessary. Note that this config option just enables users to disable the virtual merging by default. Users can still disable the virtual merging by the boot parameter. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-19powerpc: Fix swiotlb to respect the boot optionFUJITA Tomonori
powerpc initializes swiotlb before parsing the kernel boot options so swiotlb options (e.g. specifying the swiotlb buffer size) are ignored. Any time before freeing bootmem works for swiotlb so this patch moves powerpc's swiotlb initialization after parsing the kernel boot options, mem_init (as x86 does). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Tested-by: Becky Bruce <beckyb@kernel.crashing.org> Tested-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-19powerpc: Do not call prink when CONFIG_PRINTK is not definedMárton Németh
When printk() is disabled (CONFIG_PRINTK) at menu item General setup -> Configure standard kernel features (for small systems) -> Enable support for printk then there should be no printk() calls at all. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-19powerpc: Use correct ccr bit for syscall error statusNathan Lynch
The powerpc implementations of syscall_get_error and syscall_set_return_value should use CCR0:S0 (0x10000000) for testing and setting syscall error status. Fortunately these APIs don't seem to be used at the moment. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-19Merge commit 'kumar/merge' into mergeBenjamin Herrenschmidt
2010-03-18smsc95xx: Fix tx checksum offload for small packetsSteve Glendinning
TX checksum offload does not work properly when transmitting UDP packets with 0, 1 or 2 bytes of data. This patch works around the problem by calculating checksums for these packets in the driver. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18ixgbe: Fix 82599 KX4 Wake on LAN issue after an improper system shutdownMallikarjuna R Chilakala
Advanced Power Management is disabled for 82599 KX4 connections by clearing GRC.APME bit, causing it to not wake the system from an improper system shutdown. By default GRC.APME is enabled and software is not supposed to clear these settings during adapter probe. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18ixgbe: Fix 82599 multispeed fiber link issues due to Tx laser flappingMallikarjuna R Chilakala
Fix 82599 link issues during driver load and unload test using multi-speed 10G & 1G fiber modules. When connected back to back sometime 82599 multispeed fiber modules would link at 1G speed instead of 10G highest speed, due to a race condition in autotry process involving Tx laser flapping. Move autotry autoneg-37 tx laser flapping process from multispeed module init setup to driver unload. This will alert the link partner to restart its autotry process when it tries to establish the link with the link partner Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-03-18net: Potential null skb->dev dereferenceEric Dumazet
When doing "ifenslave -d bond0 eth0", there is chance to get NULL dereference in netif_receive_skb(), because dev->master suddenly becomes NULL after we tested it. We should use ACCESS_ONCE() to avoid this (or rcu_dereference()) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18jme: Advance driver version numberGuo-Fu Tseng
Advance driver version number after some bug fix. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18jme: Protect vlgrp structure by pause RX actions.Guo-Fu Tseng
Temporary stop the RX IRQ, and disable (sync) tasklet or napi. And restore it after finished the vlgrp pointer assignment. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18jme: Fix VLAN memory leakGuo-Fu Tseng
Fix memory leak while receiving 8021q tagged packet which is not registered by user. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18KS8851: Avoid NULL pointer in set rx modeAbraham Arce
Kernel NULL pointer dereference when setting mode for IFF_MULTICAST. Tested on SDP OMAP4430 board. ks8851 spi1.0: message enable is 0 ks8851 spi1.0: revision 0, MAC f2:f4:2f:56:37:de, IRQ 194 Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.34-rc1-01039-g38d7ed1-dirty #3) PC is at ks8851_set_rx_mode+0x88/0x124 LR is at bitrev32+0x24/0x2c <snip> Backtrace: [<c01bfbd8>] ? (ks8851_set_rx_mode+0x0/0x124) [<c01d4164>] (__dev_set_rx_mode+0x0/0x90) [<c01dc460>] (dev_mc_add+0x0/0x78) [<c021f0bc>] (igmp_group_added+0x0/0x64) [<c021f174>] (ip_mc_inc_group+0x0/0x150) [<c021f3b8>] (ip_mc_up+0x0/0x64) [<c0219eb0>] (inetdev_event+0x0/0x3d4) [<c0066818>] (notifier_call_chain+0x0/0x78) [<c00668b8>] (__raw_notifier_call_chain+0x0/0x24) [<c00668dc>] (raw_notifier_call_chain+0x0/0x28) [<c01d7484>] (call_netdevice_notifiers+0x0/0x24) [<c01d7780>] (__dev_notify_flags+0x0/0x68) [<c01d77e8>] (dev_change_flags+0x0/0x4c) [<c001f0bc>] (ip_auto_config+0x0/0xf1c) [<c0028490>] (do_one_initcall+0x0/0x1bc) [<c00084dc>] (kernel_init+0x0/0x234) Code: e15130bc e1833012 e14130bc e5943000 (e5934000) ---[ end trace ed0fb00a94142792 ]--- Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18tcp: Fix OOB POLLIN avoidance.Alexandra Kossovsky
From: Alexandra.Kossovsky@oktetlabs.ru Fixes kernel bugzilla #15541 Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18ring-buffer: Do 8 byte alignment for 64 bit that can not handle 4 byte alignSteven Rostedt
The ring buffer uses 4 byte alignment while recording events into the buffer, even on 64bit machines. This saves space when there are lots of events being recorded at 4 byte boundaries. The ring buffer has a zero copy method to write into the buffer, with the reserving of space and then committing it. This may cause problems when writing an 8 byte word into a 4 byte alignment (not 8). For x86 and PPC this is not an issue, but on some architectures this would cause an out-of-alignment exception. This patch uses CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to determine if it is OK to use 4 byte alignments on 64 bit machines. If it is not, it forces the ring buffer event header to be 8 bytes and not 4, and will align the length of the data to be 8 byte aligned. This keeps the data payload at 8 byte alignments and will allow these machines to run without issue. The trick to this is that the header can be either 4 bytes or 8 bytes depending on the length of the data payload. The 4 byte header has a length field that supports up to 112 bytes. If the length of the data is more than 112, the length field is set to zero, and the actual length is stored in the next 4 bytes after the header. When CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set, the code forces zero in the 4 byte header forcing the length to be stored in the 4 byte array, even with a small data load. It also forces the length of the data load to be 8 byte aligned. The combination of these two guarantee that the data is always at 8 byte alignment. Tested-by: Frederic Weisbecker <fweisbec@gmail.com> (on sparc64) Reported-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-18alpha: fix compile errors in dma-mapping-common.hFUJITA Tomonori
The commit c186caca3dbe7f44da624cb4f9d78e1b1dfb13b8 leads to the following errors with CONFIG_ALPHA_{TSUNAMI, TITAN, RAWHIDE, MARVEL}: /home/fujita/git/linux-2.6/include/asm-generic/dma-mapping-common.h: In function `dma_map_sg_attrs': /home/fujita/git/linux-2.6/include/asm-generic/dma-mapping-common.h:49: error: implicit declaration of function `for_each_sg' /home/fujita/git/linux-2.6/include/asm-generic/dma-mapping-common.h:50: error: syntax error before "kmemcheck_mark_initialized" Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reported-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-03-18alpha: remove trailing spaces in messagesFrans Pop
Signed-off-by: Frans Pop <elendil@planet.nl> Cc: linux-alpha@vger.kernel.org Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-03-18alpha: use __ratelimitAkinobu Mita
Replace open-coded rate limiting logic with __ratelimit(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: linux-alpha@vger.kernel.org Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-03-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (96 commits) Blackfin: stop cleaning include/asm/asm-offsets.h Blackfin: scale calibration when cpu freq changes Blackfin: eat spurious space in asm/dpmc.h Blackfin: fix anomaly 283 handling with exact hardware error Blackfin: bf537-stamp: add example ADXL346 orientation resources Blackfin: bf537-stamp: add example AD2S1210 IIO resources Blackfin: don't support keypad wakeup from hibernate Blackfin: bf537-stamp: add example AD7416 IIO resources Blackfin: bf537-stamp: add example ADP8860 backlight/led resources Blackfin: bf537-stamp: add example AD7414 temp sensor resources Blackfin: rename AD1836 to AD183X in board files Blackfin: bf537-stamp: add example AD2S120x resources Blackfin: add support for the on-chip MAC status interrupts Blackfin: asm/page.h: pull in asm-generic headers Blackfin: mark gpio lib functions static Blackfin: bf537-stamp: add example ADAU1361 resources Blackfin: GPIO: implement to_irq handler Blackfin: bf537-stamp: add example ADP122/ADP150 power regulator resources Blackfin: bf537-stamp: add example AD2S90 resources Blackfin: bf537-stamp: add example AD5398 power regulator resources ...
2010-03-18Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'merge' of git://git.secretlab.ca/git/linux-2.6: powerpc/5200: Build fix for mpc52xx watchdog timer code of: Fix comparison of "compatible" properties powerpc/52xx: update defconfigs spi/omap2_mcspi: Use transaction speed if provided spi/omap2_mcspi: fix NULL pointer dereference uartlite: Fix build on sparc.
generated by cgit (git 2.34.1) at 2025-09-12 03:56:21 +0000