summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-11hinic: fix strncpy output truncated compile warningsLuo bin
fix the compile warnings of 'strncpy' output truncated before terminating nul copying N bytes from a string of the same length Signed-off-by: Luo bin <luobin9@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-11drivers/net/wan/x25_asy: Added needed_headroom and a skb->len checkXie He
1. Added a skb->len check This driver expects upper layers to include a pseudo header of 1 byte when passing down a skb for transmission. This driver will read this 1-byte header. This patch added a skb->len check before reading the header to make sure the header exists. 2. Added needed_headroom When this driver transmits data, first this driver will remove a pseudo header of 1 byte, then the lapb module will prepend the LAPB header of 2 or 3 bytes. So the value of needed_headroom in this driver should be 3 - 1. Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-11net/tls: Fix kmap usageIra Weiny
When MSG_OOB is specified to tls_device_sendpage() the mapped page is never unmapped. Hold off mapping the page until after the flags are checked and the page is actually needed. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-11doc/zh_CN: resolve undefined label warning in admin-guide indexLukas Bulwahn
Documentation generation warns: Documentation/translations/zh_CN/admin-guide/index.rst:3: WARNING: undefined label: documentation/admin-guide/index.rst Use doc reference for .rst files to resolve the warning. Fixes: 37a607cf2318 ("doc/zh_CN: add admin-guide index") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20200802161956.18268-1-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11doc/zh_CN: fix title heading markup in admin-guide cpu-loadLukas Bulwahn
Documentation generation warns: Documentation/translations/zh_CN/admin-guide/cpu-load.rst:1: WARNING: Title overline too short. Extend title heading markup by one. It was just off by one. Fixes: e210c66d567c ("doc/zh_CN: add cpu-load Chinese version") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Tao Zhou <ouwen210@hotmail.com> Link: https://lore.kernel.org/r/20200802162101.18875-1-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11docs: remove the 2.6 "Upgrading I2C Drivers" guideStephen Kitt
All the drivers have long since been upgraded, and all the important information here is also included in the "Implementing I2C device drivers" guide. Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Wolfram Sang <wsa@kernel.org> Link: https://lore.kernel.org/r/20200806161456.8680-1-steve@sk2.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11docs: Correct the release date of 5.2 stableBilly Wilson
A table lists the 5.2 stable release date as September 15, but it was released on July 7. This may confuse a reader who is trying to understand the stable update release cycle. Signed-off-by: Billy Wilson <billy_wilson@byu.edu> Link: https://lore.kernel.org/r/20200806231754.7735-1-billy_wilson@byu.edu Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11mailmap: Update comments for with format and more detalisKees Cook
Without having first read the git-shortlog man-page, the format of .mailmap may not be immediately obvious. Add comments with pointers to the man-page, along with other details. Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/202008080013.58EBD83@keescook Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11docs: cdrom: Fix a typo and rst markupRemi Andruccioli
"The capability fags" should be "The capability flags". In rst markup, a incorrect markup expression is causing bad rendering in Sphinx output. Replace the erroneous single quote by a backquote. Signed-off-by: Remi Andruccioli <remi.andruccioli@gmail.com> Link: https://lore.kernel.org/r/20200808163123.17643-1-remi.andruccioli@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11Doc: admin-guide: use correct legends in kernel-parameters.txtRandy Dunlap
Documentation/admin-guide/kernel-parameters.rst includes a legend telling us what configurations or hardware platforms are relevant for certain boot options. For X86, it is spelled "X86" and for x86_64, it is spelled "X86-64", so make corrections for those. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Link: https://lore.kernel.org/r/20200810024941.30231-1-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11Documentation/features: refresh RISC-V arch support filesTobias Klauser
Support for these was added by the following commits: f2c9699f6555 ("riscv: Add STACKPROTECTOR supported") 3c4697982982 ("riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT"). ed48b297fe21 ("riscv: Enable context tracking") cbb3d91d3bcf ("riscv: Add kmemleak support") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Link: https://lore.kernel.org/r/20200810095000.32092-1-tklauser@distanz.ch Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11documentation: coccinelle: Improve command example for make C={1,2}Sumera Priyadarsini
Modify coccinelle documentation to further clarify the usage of the makefile C variable by coccicheck. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Acked-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/20200811002350.5553-1-sylphrenadin@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11Core-api: Documentation: Replace deprecated :c:func: UsagePuranjay Mohan
Replace :c:func: with func() as the previous usage is deprecated. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/20200810183019.22170-1-puranjay12@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11Dev-tools: Documentation: Replace deprecated :c:func: UsagePuranjay Mohan
Replace :c:func: with func() as the previous usage is deprecated. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Link: https://lore.kernel.org/r/20200810183613.25643-1-puranjay12@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11Filesystems: Documentation: Replace deprecated :c:func: UsagePuranjay Mohan
Replace :c:func: with func() as the previous usage is deprecated. Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Link: https://lore.kernel.org/r/20200810184828.29297-1-puranjay12@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11docs: trace: fix a typoBryan Brattlof
emumerated -> enumerated Signed-off-by: Bryan Brattlof <hello@bryanbrattlof.com> Link: https://lore.kernel.org/r/87lfili2d8.fsf@bryanbrattlof.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-08-11s390/numa: move code to arch/s390/kernelAlexander Gordeev
Move all code from arch/s390/numa/ to arch/s390/kernel/ since numa.c is the only source file and all others were deleted with the fake NUMA support removal. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-11s390/time: remove select CLOCKSOURCE_VALIDATE_LAST_CYCLE againHeiko Carstens
Sven Schnelle reported that setting CLOCKSOURCE_VALIDATE_LAST_CYCLE doesn't make sense: even if our tod clock overflows delta calculation (now - last) with unsigned 64 bit values will still be correct. Therefore revert commit 555701a714f7 ("s390/time: select CLOCKSOURCE_VALIDATE_LAST_CYCLE"). Fixes: 555701a714f7 ("s390/time: select CLOCKSOURCE_VALIDATE_LAST_CYCLE") Reported-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-11s390/debug: debug feature version 3Mikhail Zaslonko
Change __debug_entry structure in the following way: - remove redundant union - Field containing cpuid is expanded to 16 bits. 8-bit width was not enough since we already support up to 512 cpus. - Field containing the timestamp is expanded to 60 bits. The timestamp itself is now stored in the absolute Unix time format in microseconds taking the Epoch Index into acount. Adjust default header for debug entries by setting minimum width for cpuid to 4 digits. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-11s390/Kconfig: add missing ZCRYPT dependency to VFIO_APKrzysztof Kozlowski
The VFIO_AP uses ap_driver_register() (and deregister) functions implemented in ap_bus.c (compiled into ap.o). However the ap.o will be built only if CONFIG_ZCRYPT is selected. This was not visible before commit e93a1695d7fb ("iommu: Enable compile testing for some of drivers") because the CONFIG_VFIO_AP depends on CONFIG_S390_AP_IOMMU which depends on the missing CONFIG_ZCRYPT. After adding COMPILE_TEST, it is possible to select a configuration with VFIO_AP and S390_AP_IOMMU but without the ZCRYPT. Add proper dependency to the VFIO_AP to fix build errors: ERROR: modpost: "ap_driver_register" [drivers/s390/crypto/vfio_ap.ko] undefined! ERROR: modpost: "ap_driver_unregister" [drivers/s390/crypto/vfio_ap.ko] undefined! Reported-by: kernel test robot <lkp@intel.com> Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-11s390/numa: set node distance to LOCAL_DISTANCEAlexander Gordeev
The node distance is hardcoded to 0, which causes a trouble for some user-level applications. In particular, "libnuma" expects the distance of a node to itself as LOCAL_DISTANCE. This update removes the offending node distance override. Cc: <stable@vger.kernel.org> # 4.4 Fixes: 3a368f742da1 ("s390/numa: add core infrastructure") Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-11s390/pkey: remove redundant variable initializationTianjia Zhang
In the first place, the initialization value of `rc` is wrong. It is unnecessary to initialize `rc` variables, so remove their initialization operation. Fixes: f2bbc96e7cfad ("s390/pkey: add CCA AES cipher key support") Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-11s390/test_unwind: fix possible memleak in test_unwind()Wang Hai
test_unwind() misses to call kfree(bt) in an error path. Add the missed function call to fix it. Fixes: 0610154650f1 ("s390/test_unwind: print verbose unwinding results") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-11s390/gmap: improve THP splittingGerald Schaefer
During s390_enable_sie(), we need to take care of splitting all qemu user process THP mappings. This is currently done with follow_page(FOLL_SPLIT), by simply iterating over all vma ranges, with PAGE_SIZE increment. This logic is sub-optimal and can result in a lot of unnecessary overhead, especially when using qemu and ASAN with large shadow map. Ilya reported significant system slow-down with one CPU busy for a long time and overall unresponsiveness. Fix this by using walk_page_vma() and directly calling split_huge_pmd() only for present pmds, which greatly reduces overhead. Cc: <stable@vger.kernel.org> # v5.4+ Reported-by: Ilya Leoshkevich <iii@linux.ibm.com> Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-11s390/atomic: circumvent gcc 10 build regressionVasily Gorbik
Circumvent the following gcc 10 allyesconfig build regression: CC drivers/leds/trigger/ledtrig-cpu.o In file included from ./arch/s390/include/asm/bitops.h:39, from ./include/linux/bitops.h:29, from ./include/linux/kernel.h:12, from drivers/leds/trigger/ledtrig-cpu.c:18: ./arch/s390/include/asm/atomic_ops.h: In function 'ledtrig_cpu': ./arch/s390/include/asm/atomic_ops.h:46:2: warning: 'asm' operand 1 probably does not match constraints 46 | asm volatile( \ | ^~~ ./arch/s390/include/asm/atomic_ops.h:53:2: note: in expansion of macro '__ATOMIC_CONST_OP' 53 | __ATOMIC_CONST_OP(op_name, op_type, op_string, "\n") \ | ^~~~~~~~~~~~~~~~~ ./arch/s390/include/asm/atomic_ops.h:56:1: note: in expansion of macro '__ATOMIC_CONST_OPS' 56 | __ATOMIC_CONST_OPS(__atomic_add_const, int, "asi") | ^~~~~~~~~~~~~~~~~~ ./arch/s390/include/asm/atomic_ops.h:46:2: error: impossible constraint in 'asm' 46 | asm volatile( \ | ^~~ ./arch/s390/include/asm/atomic_ops.h:53:2: note: in expansion of macro '__ATOMIC_CONST_OP' 53 | __ATOMIC_CONST_OP(op_name, op_type, op_string, "\n") \ | ^~~~~~~~~~~~~~~~~ ./arch/s390/include/asm/atomic_ops.h:56:1: note: in expansion of macro '__ATOMIC_CONST_OPS' 56 | __ATOMIC_CONST_OPS(__atomic_add_const, int, "asi") | ^~~~~~~~~~~~~~~~~~ scripts/Makefile.build:280: recipe for target 'drivers/leds/trigger/ledtrig-cpu.o' failed By swapping conditions as proposed here: https://gcc.gnu.org/pipermail/gcc-patches/2020-July/549318.html Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-11parisc: Whitespace cleanups in atomic.hHelge Deller
Fix whitespace indenting and drop trailing backslashes. Cc: <stable@vger.kernel.org> # 4.19+ Signed-off-by: Helge Deller <deller@gmx.de>
2020-08-11cpufreq: intel_pstate: Implement passive mode with HWP enabledRafael J. Wysocki
Allow intel_pstate to work in the passive mode with HWP enabled and make it set the HWP minimum performance limit (HWP floor) to the P-state value given by the target frequency supplied by the cpufreq governor, so as to prevent the HWP algorithm and the CPU scheduler from working against each other, at least when the schedutil governor is in use, and update the intel_pstate documentation accordingly. Among other things, this allows utilization clamps to be taken into account, at least to a certain extent, when intel_pstate is in use and makes it more likely that sufficient capacity for deadline tasks will be provided. After this change, the resulting behavior of an HWP system with intel_pstate in the passive mode should be close to the behavior of the analogous non-HWP system with intel_pstate in the passive mode, except that the HWP algorithm is generally allowed to make the CPU run at a frequency above the floor P-state set by intel_pstate in the entire available range of P-states, while without HWP a CPU can run in a P-state above the requested one if the latter falls into the range of turbo P-states (referred to as the turbo range) or if the P-states of all CPUs in one package are coordinated with each other at the hardware level. [Note that in principle the HWP floor may not be taken into account by the processor if it falls into the turbo range, in which case the processor has a license to choose any P-state, either below or above the HWP floor, just like a non-HWP processor in the case when the target P-state falls into the turbo range.] With this change applied, intel_pstate in the passive mode assumes complete control over the HWP request MSR and concurrent changes of that MSR (eg. via the direct MSR access interface) are overridden by it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Francisco Jerez <currojerez@riseup.net>
2020-08-11io_uring: hold 'ctx' reference around task_work queue + executeJens Axboe
We're holding the request reference, but we need to go one higher to ensure that the ctx remains valid after the request has finished. If the ring is closed with pending task_work inflight, and the given io_kiocb finishes sync during issue, then we need a reference to the ring itself around the task_work execution cycle. Cc: stable@vger.kernel.org # v5.7+ Reported-by: syzbot+9b260fc33297966f5a8e@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-11fs: RWF_NOWAIT should imply IOCB_NOIOJens Axboe
With the change allowing read-ahead for IOCB_NOWAIT, we changed the RWF_NOWAIT semantics of only doing cached reads. Since we know have IOCB_NOIO to manage that specific side of it, just make RWF_NOWAIT imply IOCB_NOIO as well to restore the previous behavior. Fixes: 2e85abf053b9 ("mm: allow read-ahead with IOCB_NOWAIT set") Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-11selftests/bpf: Fix v4_to_v6 in sk_lookupStanislav Fomichev
I'm getting some garbage in bytes 8 and 9 when doing conversion from sockaddr_in to sockaddr_in6 (leftover from AF_INET?). Let's explicitly clear the higher bytes. Fixes: 0ab5539f8584 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20200807223846.4190917-1-sdf@google.com
2020-08-11selftests/bpf: Fix segmentation fault in test_progsJianlin Lv
test_progs reports the segmentation fault as below: $ sudo ./test_progs -t mmap --verbose test_mmap:PASS:skel_open_and_load 0 nsec [...] test_mmap:PASS:adv_mmap1 0 nsec test_mmap:PASS:adv_mmap2 0 nsec test_mmap:PASS:adv_mmap3 0 nsec test_mmap:PASS:adv_mmap4 0 nsec Segmentation fault This issue was triggered because mmap() and munmap() used inconsistent length parameters; mmap() creates a new mapping of 3 * page_size, but the length parameter set in the subsequent re-map and munmap() functions is 4 * page_size; this leads to the destruction of the process space. To fix this issue, first create 4 pages of anonymous mapping, then do all the mmap() with MAP_FIXED. Another issue is that when unmap the second page fails, the length parameter to delete tmp1 mappings should be 4 * page_size. Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200810153940.125508-1-Jianlin.Lv@arm.com
2020-08-11loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURELennart Poettering
When LOOP_CONFIGURE is used with LO_FLAGS_PARTSCAN we need to propagate this into the GENHD_FL_NO_PART_SCAN. LOOP_SETSTATUS does this, LOOP_CONFIGURE doesn't so far. Effect is that setting up a loopback device with partition scanning doesn't actually work when LOOP_CONFIGURE is issued, though it works fine with LOOP_SETSTATUS. Let's correct that and propagate the flag in LOOP_CONFIGURE too. Fixes: 3448914e8cc5("loop: Add LOOP_CONFIGURE ioctl") Signed-off-by: Lennart Poettering <lennart@poettering.net> Acked-by: Martijn Coenen <maco@android.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-11libbpf: Do not use __builtin_offsetof for offsetofYonghong Song
Commit 5fbc220862fc ("tools/libpf: Add offsetof/container_of macro in bpf_helpers.h") added a macro offsetof() to get the offset of a structure member: #define offsetof(TYPE, MEMBER) ((size_t)&((TYPE *)0)->MEMBER) In certain use cases, size_t type may not be available so Commit da7a35062bcc ("libbpf bpf_helpers: Use __builtin_offsetof for offsetof") changed to use __builtin_offsetof which removed the dependency on type size_t, which I suggested. But using __builtin_offsetof will prevent CO-RE relocation generation in case that, e.g., TYPE is annotated with "preserve_access_info" where a relocation is desirable in case the member offset is changed in a different kernel version. So this patch reverted back to the original macro but using "unsigned long" instead of "site_t". Fixes: da7a35062bcc ("libbpf bpf_helpers: Use __builtin_offsetof for offsetof") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/bpf/20200811030852.3396929-1-yhs@fb.com
2020-08-11ALSA: hda - reverse the setting value in the micmute_led_setHui Wang
Before the micmute_led_set() is introduced, the function of alc_gpio_micmute_update() will set the gpio value with the !micmute_led.led_value, and the machines have the correct micmute led status. After the micmute_led_set() is introduced, it sets the gpio value with !!micmute_led.led_value, so the led status is not correct anymore, we need to set micmute_led_polarity = 1 to workaround it. Now we fix the micmute_led_set() and remove micmute_led_polarity = 1. Fixes: 87dc36482cab ("ALSA: hda/realtek - Add LED class support for micmute LED") Reported-and-suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20200811122430.6546-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-08-11ALSA: echoaduio: Drop superfluous volatile modifierTakashi Iwai
The dsp_registers field of struct echoaduio has the volatile modifier, but it's basically superfluous; the field is accessed only for the base pointer of readl() and writel(), hence marking with __iomem alone should suffice. OTOH, having the volatile prefix causes a compile warning like: sound/pci/echoaudio/echoaudio.c:1878:14: warning: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Wdiscarded-qualifiers] So it's better to drop this superfluous modifier. Link: https://lore.kernel.org/r/20200803143958.24324-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-08-11KVM: MIPS/VZ: Fix build error caused by 'kvm_run' cleanupXingxing Su
Commit c34b26b98caca48ec9ee9 ("KVM: MIPS: clean up redundant 'kvm_run' parameters") remove the 'kvm_run' parameter in kvm_vz_gpsi_lwc2. The following build error: arch/mips/kvm/vz.c: In function 'kvm_trap_vz_handle_gpsi': arch/mips/kvm/vz.c:1243:43: error: 'run' undeclared (first use in this function) er = kvm_vz_gpsi_lwc2(inst, opc, cause, run, vcpu); ^~~ arch/mips/kvm/vz.c:1243:43: note: each undeclared identifier is reported only once for each function it appears in scripts/Makefile.build:283: recipe for target 'arch/mips/kvm/vz.o' failed make[2]: *** [arch/mips/kvm/vz.o] Error 1 scripts/Makefile.build:500: recipe for target 'arch/mips/kvm' failed make[1]: *** [arch/mips/kvm] Error 2 Makefile:1785: recipe for target 'arch/mips' failed make: *** [arch/mips] Error 2 Signed-off-by: Xingxing Su <suxingxing@loongson.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-11x86/hyperv: Make hv_setup_sched_clock inlineMichael Kelley
Make hv_setup_sched_clock inline so the reference to pv_ops works correctly with objtool updates to detect noinstr violations. See https://lore.kernel.org/patchwork/patch/1283635/ Signed-off-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/1597022991-24088-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-08-11btrfs: fix return value mixup in btrfs_get_extentPavel Machek
btrfs_get_extent() sets variable ret, but out: error path expect error to be in variable err so the error code is lost. Fixes: 6bf9e4bd6a27 ("btrfs: inode: Verify inode mode to avoid NULL pointer dereference") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11parisc/kernel/ftrace: Remove function callback castsOscar Carter
In an effort to enable -Wcast-function-type in the top-level Makefile to support Control Flow Integrity builds, remove all the function callback casts. Co-developed-by: Helge Deller <deller@gmx.de> Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Signed-off-by: Helge Deller <deller@gmx.de>
2020-08-11sections.h: dereference_function_descriptor() returns void pointerHelge Deller
The function dereference_function_descriptor() takes on hppa64, ppc64 and ia64 a pointer to a function descriptor and returns a (void) pointer to the dereferenced function. To make cross-arch coding easier, on all other architectures the dereference_function_descriptor() macro should return a void pointer too. Signed-off-by: Helge Deller <deller@gmx.de>
2020-08-11zonefs: update documentation to reflect zone size vs capacityJohannes Thumshirn
Update the zonefs documentation to reflect the difference between a zone's size and it's capacity. The maximum file size in zonefs is the zones capacity, for ZBC and ZAC based devices, which do not have a separate zone capacity, the zone capacity is equal to the zone size. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-08-11zonefs: add zone-capacity supportJohannes Thumshirn
In the zoned storage model, the sectors within a zone are typically all writeable. With the introduction of the Zoned Namespace (ZNS) Command Set in the NVM Express organization, the model was extended to have a specific writeable capacity. This zone capacity can be less than the overall zone size for a NVMe ZNS device or null_blk in zoned-mode. For other ZBC/ZAC devices the zone capacity is always equal to the zone size. Use the zone capacity field instead from blk_zone for determining the maximum inode size and inode blocks in zonefs. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
2020-08-11x86/xen: drop tests for highmem in pv codeJuergen Gross
With support for 32-bit pv guests gone pure pv-code no longer needs to test for highmem. Dropping those tests removes the need for flushing in some places. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-11x86/xen: eliminate xen-asm_64.SJuergen Gross
With 32-bit pv-guest support removed xen-asm_64.S can be merged with xen-asm.S Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-11x86/xen: remove 32-bit Xen PV guest supportJuergen Gross
Xen is requiring 64-bit machines today and since Xen 4.14 it can be built without 32-bit PV guest support. There is no need to carry the burden of 32-bit PV guest support in the kernel any longer, as new guests can be either HVM or PVH, or they can use a 64 bit kernel. Remove the 32-bit Xen PV support from the kernel. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-11Merge tag 'amd-drm-fixes-5.9-2020-08-07' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-fixes-5.9-2020-08-07: amdgpu: - Re-add spelling typo fix - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes - SMU i2c fix - Power fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200807222843.3909-1-alexander.deucher@amd.com
2020-08-10Merge tag 'perf-tools-2020-08-10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools updates from Arnaldo Carvalho de Melo: "New features: - Introduce controlling how 'perf stat' and 'perf record' works via a control file descriptor, allowing starting with events configured but disabled until commands are received via the control file descriptor. This allows, for instance for tools such as Intel VTune to make further use of perf as its Linux platform driver. - Improve 'perf record' to to register in a perf.data file header the clockid used to help later correlate things like syslog files and perf events recorded. - Add basic syscall and find_next_bit benchmarks to 'perf bench'. - Allow using computed metrics in calculating other metrics. For instance: { .metric_expr = "l2_rqsts.demand_data_rd_hit + l2_rqsts.pf_hit + l2_rqsts.rfo_hit", .metric_name = "DCache_L2_All_Hits", }, { .metric_expr = "max(l2_rqsts.all_demand_data_rd - l2_rqsts.demand_data_rd_hit, 0) + l2_rqsts.pf_miss + l2_rqsts.rfo_miss", .metric_name = "DCache_L2_All_Miss", }, { .metric_expr = "dcache_l2_all_hits + dcache_l2_all_miss", .metric_name = "DCache_L2_All", } - Add suport for 'd_ratio', '>' and '<' operators to the expression resolver used in calculating metrics in 'perf stat'. Support for new kernel features: - Support TEXT_POKE and KSYMBOL_TYPE_OOL perf metadata events to cope with things like ftrace, trampolines, i.e. changes in the kernel text that gets in the way of properly decoding Intel PT hardware traces, for instance. Intel PT: - Add various knobs to reduce the volume of Intel PT traces by reducing the level of details such as decoding just some types of packets (e.g., FUP/TIP, PSB+), also filtering by time range. - Add new itrace options (log flags to the 'd' option, error flags to the 'e' one, etc), controlling how Intel PT is transformed into perf events, document some missing options (e.g., how to synthesize callchains). BPF: - Properly report BPF errors when parsing events. - Do not setup side-band events if LIBBPF is not linked, fixing a segfault. Libraries: - Improvements to the libtraceevent plugin mechanism. - Improve libtracevent support for KVM trace events SVM exit reasons. - Add a libtracevent plugins for decoding syscalls/sys_enter_futex and for tlb_flush. - Ensure sample_period is set libpfm4 events in 'perf test'. - Fixup libperf namespacing, to make sure what is in libperf has the perf_ namespace while what is now only in tools/perf/ doesn't use that prefix. Arch specific: - Improve the testing of vendor events and metrics in 'perf test'. - Allow no ARM CoreSight hardware tracer sink to be specified on command line. - Fix arm_spe_x recording when mixed with other perf events. - Add s390 idle functions 'psw_idle' and 'psw_idle_exit' to list of idle symbols. - List kernel supplied event aliases for arm64 in 'perf list'. - Add support for extended register capability in PowerPC 9 and 10. - Added nest IMC power9 metric events. Miscellaneous: - No need to setup sample_regs_intr/sample_regs_user for dummy events. - Update various copies of kernel headers, some causing perf to handle new syscalls, MSRs, etc. - Improve usage of flex and yacc, enabling warnings and addressing the fallout. - Add missing '--output' option to 'perf kmem' so that it can pass it along to 'perf record'. - 'perf probe' fixes related to adding multiple probes on the same address for the same event. - Make 'perf probe' warn if the target function is a GNU indirect function. - Remove //anon mmap events from 'perf inject jit' to fix supporting both using ELF files for generated functions and the perf-PID.map approaches" * tag 'perf-tools-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (144 commits) perf record: Skip side-band event setup if HAVE_LIBBPF_SUPPORT is not set perf tools powerpc: Add support for extended regs in power10 perf tools powerpc: Add support for extended register capability tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools arch x86: Sync asm/cpufeatures.h with the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers UAPI: update linux/in.h copy tools headers API: Update close_range affected files perf script: Add 'tod' field to display time of day perf script: Change the 'enum perf_output_field' enumerators to be 64 bits perf data: Add support to store time of day in CTF data conversion perf tools: Move clockid_res_ns under clock struct perf header: Store clock references for -k/--clockid option perf tools: Add clockid_name function perf clockid: Move parse_clockid() to new clockid object tools lib traceevent: Handle possible strdup() error in tep_add_plugin_path() API libtraceevent: Fixed description of tep_add_plugin_path() API libtraceevent: Fixed type in PRINT_FMT_STING libtraceevent: Fixed broken indentation in parse_ip4_print_args() libtraceevent: Improve error handling of tep_plugin_add_option() API ...
2020-08-10Merge tag 'ktest-v5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest updates from Steven Rostedt: - Have config-bisect save the good/bad configs at each step. - Show log file location even on success - Add PRE_TEST_DIE to kill test if the PRE_TEST fails - Add a NOT operator for conditionals in config file - Add the log output of the last test when emailing on failure. - Other minor clean ups and small fixes. * tag 'ktest-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest.pl: Fix spelling mistake "Cant" -> "Can't" ktest.pl: Change the logic to control the size of the log file emailed ktest.pl: Add MAIL_MAX_SIZE to limit the amount of log emailed ktest.pl: Add the log of last test in email on failure ktest.pl: Turn off buffering to the log file ktest.pl: Just open up the log file once ktest.pl: Add a NOT operator ktest.pl: Define PRE_TEST_DIE to kill the test if the PRE_TEST fails ktest.pl: Always show log file location if defined even on success ktest.pl: Have config-bisect save each config used in the bisect
2020-08-10Merge tag 'locking-urgent-2020-08-10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Thomas Gleixner: "A set of locking fixes and updates: - Untangle the header spaghetti which causes build failures in various situations caused by the lockdep additions to seqcount to validate that the write side critical sections are non-preemptible. - The seqcount associated lock debug addons which were blocked by the above fallout. seqcount writers contrary to seqlock writers must be externally serialized, which usually happens via locking - except for strict per CPU seqcounts. As the lock is not part of the seqcount, lockdep cannot validate that the lock is held. This new debug mechanism adds the concept of associated locks. sequence count has now lock type variants and corresponding initializers which take a pointer to the associated lock used for writer serialization. If lockdep is enabled the pointer is stored and write_seqcount_begin() has a lockdep assertion to validate that the lock is held. Aside of the type and the initializer no other code changes are required at the seqcount usage sites. The rest of the seqcount API is unchanged and determines the type at compile time with the help of _Generic which is possible now that the minimal GCC version has been moved up. Adding this lockdep coverage unearthed a handful of seqcount bugs which have been addressed already independent of this. While generally useful this comes with a Trojan Horse twist: On RT kernels the write side critical section can become preemtible if the writers are serialized by an associated lock, which leads to the well known reader preempts writer livelock. RT prevents this by storing the associated lock pointer independent of lockdep in the seqcount and changing the reader side to block on the lock when a reader detects that a writer is in the write side critical section. - Conversion of seqcount usage sites to associated types and initializers" * tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) locking/seqlock, headers: Untangle the spaghetti monster locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header x86/headers: Remove APIC headers from <asm/smp.h> seqcount: More consistent seqprop names seqcount: Compress SEQCNT_LOCKNAME_ZERO() seqlock: Fold seqcount_LOCKNAME_init() definition seqlock: Fold seqcount_LOCKNAME_t definition seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g hrtimer: Use sequence counter with associated raw spinlock kvm/eventfd: Use sequence counter with associated spinlock userfaultfd: Use sequence counter with associated spinlock NFSv4: Use sequence counter with associated spinlock iocost: Use sequence counter with associated spinlock raid5: Use sequence counter with associated spinlock vfs: Use sequence counter with associated spinlock timekeeping: Use sequence counter with associated raw spinlock xfrm: policy: Use sequence counters with associated lock netfilter: nft_set_rbtree: Use sequence counter with associated rwlock netfilter: conntrack: Use sequence counter with associated spinlock sched: tasks: Use sequence counter with associated spinlock ...
2020-08-11Merge tag 'drm-misc-fixes-2020-08-04' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next * backmerge from drm-fixes at v5.8-rc7 * add orientation quirk for ASUS T103HAF * drm/omap: force runtime PM suspend on system suspend * drm/tidss: fix modeset init for DPI panels * re-added docs for drm_gem_flink_ioctl() * ttm: fix page-offset calculation within TTM Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200804125510.GA29670@linux-uq9g
generated by cgit (git 2.34.1) at 2025-09-13 14:27:06 +0000