summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-02-26i40e: fix race in hang checkJesse Brandeburg
The driver was having some issues with false Tx hang detection. This makes the driver a little more direct with the checks for progress forward by directly checking the head write back address and tail register when determining progress. This avoids Tx hangs where the software gets behind, because we are directly checking hardware state when determining hang state. Change-ID: I774f0e861c9e8ab5ccb213634100fe15440ae24a Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Fix TSO with more than 8 frags per segment issueAnjali Singhai
The hardware has some limitations the driver needs to adhere to, that we found in extended testing. 1) no more than 8 descriptors per packet on the wire 2) no header can span more than 3 descriptors If one of these events occurs, the hardware will generate an internal error and freeze the Tx queue. This patch linearizes the skb to avoid these situations. Change-ID: I37dab7d3966e14895a9663ec4d0aaa8eb0d9e115 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Don't check for Tx hang when PF downAkeem G Abodunrin
This patch adds check to bail out if device is already down when checking for Tx hang subtask. Change-ID: I3853fb7a6d11cb9a4c349b687cb25c15b19977a0 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: fix shift precedence issueShannon Nelson
Add parens to make sure the shift and bitwise precedences don't work backwards for us. Change-ID: I60c10ef4fad6bc654522b9d8a53da2e270a0f268 Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26i40e: Fix memory leak at failure path in i40e_dbg_command_write()Alexey Khoroshilov
The patch fixes a leak of 'cmd_buf' when copy_from_user() failed in i40e_dbg_command_write(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26ASoC: OMAP: mcbsp: Fix CLKX and CLKR pinmux when used as inputsThomas Niederprüm
This patch fixes faulty behaviour in a setup where the input clock for the SRG is fed through the CLKR/CLKX pin but the McBSP is configured to be master (SND_SOC_DAIFMT_CBS_CFS). In that case of course CLKR/CLKX must not be configured as output pin. Otherwise the input clock is messed up horribly. This patch makes it possible to use the CLKR/CLKX pin rather than CLKS to inject a reference clock in setups where McBSP is master and not both rx and tx are used. However for this to work it has to be ensured that set_dai_sysclk() is called after set_dai_fmt(). This was tested on a beagleboard-xm using McBSP1 to drive a i2s DAC through the tx lines (CLKX,FSX,DX). Using this patch the CLKR pin is used to inject an external reference clock. Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-26ASoC: rt5677: Correct the routing paths of that after IF1/2 DACx MuxOder Chiou
The patch corrects the routing paths of that after IF1/2 DACx Mux Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-26Merge tag 'topic/drm-misc-2015-02-25' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next misc atomic and dp macros * tag 'topic/drm-misc-2015-02-25' of git://anongit.freedesktop.org/drm-intel: drm: Adding edp1.4 specific dpcd macros drm/atomic-helpers: make mode_set hooks optional drm/atomic-helper: Rename commmit_post/pre_planes drm/atomic: Rename drm_atomic_helper_commit_pre_planes() state argument drm: If available use atomic state in getcrtc ioctl drm: Add DRM_DEBUG_ATOMIC drm/atomic-helpers: Fix documentation typos and wrong copy&paste drm: Fix the CRTC_STEREO_DOUBLE_ONLY define to include stero modes drm: Fix drm_crtc_vblank_get() documentation
2015-02-26genirq / PM: better describe IRQF_NO_SUSPEND semanticsMark Rutland
The IRQF_NO_SUSPEND flag is intended to be used for interrupts required to be enabled during the suspend-resume cycle. This mostly consists of IPIs and timer interrupts, potentially including chained irqchip interrupts if these are necessary to handle timers or IPIs. If an interrupt does not fall into one of the aforementioned categories, requesting it with IRQF_NO_SUSPEND is likely incorrect. Using IRQF_NO_SUSPEND does not guarantee that the interrupt can wake the system from a suspended state. For an interrupt to be able to trigger a wakeup, it may be necessary to program various components of the system. In these cases it is necessary to use {enable,disabled}_irq_wake. Unfortunately, several drivers assume that IRQF_NO_SUSPEND ensures that an IRQ can wake up the system, and the documentation can be read ambiguously w.r.t. this property. This patch updates the documentation regarding IRQF_NO_SUSPEND to make this caveat explicit, hopefully making future misuse rarer. Cleanup of existing misuse will occur as part of later patch series. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-26drm/i915: Ensure crtc_state backpointer is always initializedMatt Roper
As we transition to full atomic modesetting, we want to be able to pass intel_crtc_state around in various places that we pass intel_crtc directly today. Ensure that the ->crtc backpointer is properly initialized in case we need to get back to the associated CRTC. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26drm/i915: Use enabled value from crtc_state rather than crtc (v2)Matt Roper
As vendors transition their drivers from legacy to atomic there's some duplication of data between drm_crtc and drm_crtc_state (since unconverted drivers likely won't have a state structure). i915 is partially converted and does have a crtc->state structure, but still uses direct crtc fields internally in many places, which causes the two sets of data to get out of sync. As of commit commit 31c946e85ce6b48ce0f25e3cdca8362e4fe8b300 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Feb 22 12:24:17 2015 +0100 drm: If available use atomic state in getcrtc ioctl This way drivers fully converted to atomic don't need to update these legacy state variables in their modeset code any more. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> the DRM core starts assuming that the presence of a ->state structure implies that it should make use of the values stored there which, on i915, leads to the core code using stale values for CRTC 'enabled' status. Let's switch over to using the state value of 'enable' internally rather than using the drm_crtc field. This ensures that our driver internals are working from the same data that the DRM core is, avoiding mismatches. This patch was generated with Coccinelle using the following semantic patch: <smpl> @@ struct drm_crtc C; struct drm_crtc *CP; @@ ( - C.enabled + C.state->enable | - CP->enabled + CP->state->enable ) // For assignments, we still update the legacy value as well as the state value // so add an extra assignment statement for that. @@ struct drm_crtc C; struct drm_crtc *CP; expression E; @@ ( C.state->enable = E; + C.enabled = E; | CP->state->enable = E; + CP->enabled = E; ) </smpl> The crtc->mode and crtc->hwmode fields should probably be transitioned over as well eventually, but we seem to do an okay job of keeping those up-to-date already so I want to minimize the changes that will clash with Ander's in-progress atomic work. v2: Don't remove the assignments to the legacy value when we assign to the state value. A second cocci stanza takes care of adding the legacy assignment back where appropriate. (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25MAINTAINERS: update my email addressAndy Gospodarek
I have been signing off on patches with this address so I'll change it. Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25amd-xgbe-phy: PHY KX/KR mode differencesTom Lendacky
The PHY requires different settings for the Decision Feedback Analyzer (DFE) when running in KX mode vs. KR mode. Update the code to change these settings when changing modes in order to provide a more stable link. Additionally, adjust the 10GbE PQ skew default setting to a more sane value. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25drm/i915: Cache ringbuf pointer in request structureJohn Harrison
In execlist mode, the ringbuf is a function of the ring and context whereas in legacy mode, it is derived from the ring alone. Thus the calculation required to determine the ringbuf pointer from the ring (and context) also needs to test execlist mode or not. This is messy. Further, the request structure holds a pointer to both the ring and the context for which it was created. Thus, given a request, it is possible to derive the ringbuf in either legacy or execlist mode. Hence it is necessary to pass just the request in to all the low level functions rather than some combination of request, ring, context and ringbuf. However, rather than recalculating it each time, it is much simpler to just cache the ringbuf pointer in the request structure itself. Caching the pointer means the calculation is done once at request creation time and all further code and simply read it directly from the request structure. OTC-Jira: VIZ-5115 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> [danvet: Drop contentless comment in lrc alloc request entirely. And spelling fix in the commit message.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25drm/i915: Add missing trace point to LRC execbuff code pathJohn Harrison
There is a trace point in the legacy execbuffer execution path that is missing from the execlist path. Trace points are extremely useful for debugging and are used by various automated validation tests. Hence, this patch adds the missing trace point back in. OTC-Jira: VIZ-5115 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25drm/i915: Rename 'flags' to 'dispatch_flags' for better code readingJohn Harrison
There is a flags word that is passed through the execbuffer code path all the way from initial decoding of the user parameters down to the very final dispatch buffer call. It is simply called 'flags'. Unfortuantely, there are many other flags words floating around in the same blocks of code. Even more once the GPU scheduler arrives. This patch makes it more obvious exactly which flags word is which by renaming 'flags' to 'dispatch_flags'. Note that the bit definitions for this flags word already have an 'I915_DISPATCH_' prefix on them and so are not quite so ambiguous. OTC-Jira: VIZ-1587 Signed-off-by: John Harrison <John.C.Harrison@Intel.com> [danvet: Resolve conflict with Chris' rework of the bb parsing.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25drm/radeon: only enable DP audio if the monitor supports itAlex Deucher
We were enabling DP secondary streams even if the monitor didn't support them. Fixes display problems on some DP monitors. Tested-by: Jim Boz <jim876@xs4all.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25drm/radeon: fix atom aux payload size check for writes (v2)Alex Deucher
The atom aux param interface only supports 4 bits for the total write transfer size (header + payload). This limits us to 12 bytes of payload rather than 16. Add a check for this. Reads are not affected. v2: switch to WARN_ON_ONCE Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25drm/radeon: fix 1 RB harvest config setup for TN/RLAlex Deucher
The logic was reversed from what the hw actually exposed. Fixes graphics corruption in certain harvest configurations. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-02-25drm/radeon: enable SRBM timeout interrupt on EG/NIChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25drm/radeon: enable SRBM timeout interrupt on SIChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25drm/radeon: enable SRBM timeout interrupt on CIK v2Leo Liu
v2: disable it on suspend Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25drm/radeon: dump full IB if we hit a packet errorAlex Deucher
Dump the whole IB if we run into an invalid packet. This makes things much easier to debug. bug: https://bugs.freedesktop.org/show_bug.cgi?id=89148 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-02-25drm/radeon: disable mclk switching with 120hz+ monitorsAlex Deucher
These tend to be problematic even if the vblank period is long enough. This needs more investigation across a wider range of displays. Disable for now. bugs: https://bugs.freedesktop.org/show_bug.cgi?id=87796 https://bugs.freedesktop.org/show_bug.cgi?id=89198 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-02-25drm/radeon: use drm_mode_vrefresh() rather than mode->vrefreshAlex Deucher
Just in case it hasn't been calculated for the mode. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-02-25drm/radeon: enable native backlight control on old macsNathan-J. Hirschauer
Commit b7bc596ebbe0 ("drm/radeon: disable native backlight control on pre-r6xx asics (v2)") accidently broke backlight control on old mac laptops that use the on-GPU backlight controller. Signed-off-by: Nathan-J. Hirschauer <nathanhi@deepserve.info> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-02-25perf tools: Make sparc64 arch point to sparcDavid Ahern
The recent build changes cause perf to not compile for sparc64 since the arch/sparc64/Build file does not exist: /home/dahern/kernels/linux.git/tools/build/Makefile.build:40: arch/sparc64/Build: No such file or directory Fix by converting the sparc64 RAW_ARCH to sparc ARCH -- similar to what is done for x86_64. Signed-off-by: David Ahern <david.ahern@oracle.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1424306222-96843-1-git-send-email-david.ahern@oracle.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25perf symbols: Define EM_AARCH64 for older OSesDavid Ahern
4886f2ca19f6f added an arm-64 check, but the EM_AARCH64 macro is not defined in older releases (e.g., RHEL6). Define if it is not defined. Signed-off-by: David Ahern <david.ahern@oracle.com> Cc: Victor Kamensky <victor.kamensky@linaro.org> Link: http://lkml.kernel.org/r/1424306017-96797-1-git-send-email-david.ahern@oracle.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25perf top: Fix SIGBUS on sparc64David Ahern
perf-top is terminating due to SIGBUS on sparc64. git bisect points to: commit 82396986032915c1572bfb74b224fcc2e4e8ba7c Author: Arnaldo Carvalho de Melo <acme@redhat.com> Date: Mon Sep 8 13:26:35 2014 -0300 perf evlist: Refcount mmaps We need to know how many fds are using a perf mmap via PERF_EVENT_IOC_SET_OUTPUT, so that we can know when to ditch an mmap, refcount it. This commit added 'int refcnt' to struct perf_mmap and the addition makes the event_copy element no longer 8-byte aligned. Fix by adding __attribute__((aligned(8))) to the event_copy struct member. Signed-off-by: David Ahern <david.ahern@oracle.com> Link: http://lkml.kernel.org/r/1424304198-92028-1-git-send-email-david.ahern@oracle.com [ Switched from 'int pad;' to using __attribute__, David tested/acked that ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25perf tools: Fix probing for PERF_FLAG_FD_CLOEXEC flagAdrian Hunter
Commit f6edb53c4993ffe92ce521fb449d1c146cea6ec2 converted the probe to a CPU wide event first (pid == -1). For kernels that do not support the PERF_FLAG_FD_CLOEXEC flag the probe fails with EINVAL. Since this errno is not handled pid is not reset to 0 and the subsequent use of pid = -1 as an argument brings in an additional failure path if perf_event_paranoid > 0: $ perf record -- sleep 1 perf_event_open(..., 0) failed unexpectedly with error 13 (Permission denied) [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.007 MB /tmp/perf.data (11 samples) ] Also, ensure the fd of the confirmation check is closed and comment why pid = -1 is used. Needs to go to 3.18 stable tree as well. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Based-on-patch-by: David Ahern <david.ahern@oracle.com> Acked-by: David Ahern <david.ahern@oracle.com> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/54EC610C.8000403@intel.com Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25Merge tag 'fixes-v4.0-rc1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for various omap devices. It's all dts and defconfig changes for this set: - Fix wrong DMA properties for dma to avoid them getting copied wrong again before we start actually using them - USB fixes to revert the extcon changes as the driver did not get merged yet and cause issues - Omap5 and dra7 fixes to boot from sata - Fix few am437x issues for i2c and pinctrl - Fix beaglebone for hardwared USB configuration - Defconfig changes for NAND, SATA and TPS62362 - Fix n900 i2c numbering for legacy user space and smc91x register offset so it works also for qemu - Fix incomplete USB configuration for dm816x * tag 'fixes-v4.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-bone*: usb0 is hardwired for peripheral ARM: dts: dra7x-evm: beagle-x15: Fix USB Host ARM: omap2plus_defconfig: Fix SATA boot ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver ARM: dts: dra7: Correct the dma controller's property names ARM: dts: omap5: Correct the dma controller's property names ARM: dts: omap4: Correct the dma controller's property names ARM: dts: omap3: Correct the dma controller's property names ARM: dts: omap2: Correct the dma controller's property names ARM: dts: am437x-idk: fix sleep pinctrl state ARM: omap2plus_defconfig: enable TPS62362 regulator ARM: dts: am437x-idk: fix TPS62362 i2c bus ARM: dts: n900: Fix offset for smc91x ethernet ARM: dts: n900: fix i2c bus numbering ARM: dts: Fix USB dts configuration for dm816x ARM: dts: OMAP5: Fix SATA PHY node ARM: dts: DRA7: Fix SATA PHY node
2015-02-25arm64: Add L2 cache topology to ARM Ltd boards/modelsSudeep Holla
Commit 5d425c18653731af6 ("arm64: kernel: add support for cpu cache information") adds cacheinfo support for ARM64. Since there's no architectural way of detecting the cpus that share particular cache, device tree can be used and the core cacheinfo already supports the same. This patch adds the L2 cache topology on Juno board, FVP/RTSM and foundation models. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-25drm/i915: Plumb drm_device through page tables operationsMichel Thierry
The next patch in the series will require it for alloc_pt_single. v2: Rebased after s/page_tables/page_table/. Signed-off-by: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25drm/i915: Create page table allocatorsBen Widawsky
As we move toward dynamic page table allocation, it becomes much easier to manage our data structures if break do things less coarsely by breaking up all of our actions into individual tasks. This makes the code easier to write, read, and verify. Aside from the dissection of the allocation functions, the patch statically allocates the page table structures without a page directory. This remains the same for all platforms, The patch itself should not have much functional difference. The primary noticeable difference is the fact that page tables are no longer allocated, but rather statically declared as part of the page directory. This has non-zero overhead, but things gain additional complexity as a result. This patch exists for a few reasons: 1. Splitting out the functions allows easily combining GEN6 and GEN8 code. Page tables have no difference based on GEN8. As we'll see in a future patch when we add the DMA mappings to the allocations, it requires only one small change to make work, and error handling should just fall into place. 2. Unless we always want to allocate all page tables under a given PDE, we'll have to eventually break this up into an array of pointers (or pointer to pointer). 3. Having the discrete functions is easier to review, and understand. All allocations and frees now take place in just a couple of locations. Reviewing, and catching leaks should be easy. 4. Less important: the GFP flags are confined to one location, which makes playing around with such things trivial. v2: Updated commit message to explain why this patch exists v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/ v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel) v5: Added additional safety checks in gen8 clear/free/unmap. v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika). v7: Make err_out loop symmetrical to the way we allocate in alloc_pt_range. Also s/page_tables/page_table and correct commit message (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25drm/i915: Complete page table structuresBen Widawsky
Move the remaining members over to the new page table structures. This can be squashed with the previous commit if desire. The reasoning is the same as that patch. I simply felt it is easier to review if split. v2: In lrc: s/ppgtt->pd_dma_addr[i]/ppgtt->pdp.page_directory[i].daddr/ v3: Rebase. v4: Rebased after s/page_tables/page_table/. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25drm/i915: page table abstractionsBen Widawsky
When we move to dynamic page allocation, keeping page_directory and pagetabs as separate structures will help to break actions into simpler tasks. To help transition the code nicely there is some wasted space in gen6/7. This will be ameliorated shortly. Following the x86 pagetable terminology: PDPE = struct i915_page_directory_pointer_entry. PDE = struct i915_page_directory_entry [page_directory]. PTE = struct i915_page_table_entry [page_tables]. v2: fixed mismatches after clean-up/rebase. v3: Clarify the names of the multiple levels of page tables (Daniel) v4: Addressing Mika's review comments. s/gen8_free_page_directories/gen8_free_page_directory and free the page tables for the directory there. In gen8_ppgtt_allocate_page_directories, do not leak previously allocated pt in case the page_directory alloc fails. Update error return handling in gen8_ppgtt_alloc. v5: Do not leak pt on error in gen6_ppgtt_allocate_page_tables. (Mika) v6: s/page_tables/page_table/. (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25perf tools: Fix pthread_attr_setaffinity_np build errorAdrian Hunter
Feature detection for pthread_attr_setaffinity_np was failing, producing this error: In file included from bench/futex-hash.c:17:0: bench/futex.h:73:19: error: conflicting types for ‘pthread_attr_setaffinity_np’ static inline int pthread_attr_setaffinity_np(pthread_attr_t *attr, ^ In file included from bench/futex.h:72:0, from bench/futex-hash.c:17: /usr/include/pthread.h:407:12: note: previous declaration of ‘pthread_attr_setaffinity_np’ was here extern int pthread_attr_setaffinity_np (pthread_attr_t *__attr, ^ make[3]: *** [bench/futex-hash.o] Error 1 make[2]: *** [bench] Error 2 make[2]: *** Waiting for unfinished jobs.... This was because compiling test-pthread-attr-setaffinity-np.c failed due to the function arguments: test-pthread-attr-setaffinity-np.c: In function ‘main’: test-pthread-attr-setaffinity-np.c:11:2: warning: null argument where non-null required (argument 3) [-Wnonnull] ret = pthread_attr_setaffinity_np(&thread_attr, 0, NULL); ^ So fix the arguments. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Stephane Eranian <eranian@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1424774766-24194-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25perf tools: Define _GNU_SOURCE on pthread_attr_setaffinity_np feature checkJosh Boyer
The man page for pthread_attr_set_affinity_np states that _GNU_SOURCE must be defined before pthread.h is included in order to get the proper function declaration. Define this in the Makefile. Without this defined, the feature check fails on a Fedora system with gcc5 and then the perf build later fails with conflicting prototypes for the function. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: http://lkml.kernel.org/r/20150211162404.GA15522@hansolo.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-25drm/i915/skl: Add support for edp1.4 low vswingSonika Jindal
Based upon vbt's vswing preemph settings value select the appropriate translations for edp. v2: Incorporating bspec changes for vswing and preemph levels, adding edp translation table. Removed HSW from selection 9 which is specific to skl and correcting the returning of level2 from max pre emph (Damien) v3: Rebasing on top of renaming patches. Adding level(3,0) since level(2,2) as mentioned in bspec is invalid as per edp spec. Also changed the determining of size of the table selected (Satheesh). v4: Adding level 3 in max voltage selection if low vswing is selected (Satheesh) v5: Add a comment stating that skl_ddi_translations_edp is for eDP 1.4 low vswing panels. v6: Updating recommended DDI translation table for edp 1.4 Reviewed-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v4) Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> (v6) Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25drm/i915/skl: Support for edp low_vswing param in vbtSonika Jindal
v2: Adding VBT version check for low_vswing field, and correcting parsing v3: (Damien) - Restrain the scope of the 'vswing' variable - Use the more idiomatic "ev_priv->vbt.edp_low_vswing = vswing == 0;" instead of if (foo) var = true; else var = false; - Shorten edp_vswing_premph_setting to edp_vswing_premph to fit in 80 chars - Add the version from which the edp_vswing_premph field is valid in the struct definition Reviewed-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v2) Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25drm/i915: cleanup some indentingDan Carpenter
Static checkers complain that we should probably add curly braces because, from the indenting, it looks like seq_printf() should be inside the list_for_each_entry() loop. But the code is actually correct, it's just the indenting which is off. Besides fixing the indenting on seq_printf(), I did add curly braces, because generally mult-line indents should have curly braces to make them more readable. The unintended indent was left behind and not unindented in commit d7f46fc4e7323887494db13f063a8e59861fefb0 Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Fri Dec 6 14:10:55 2013 -0800 drm/i915: Make pin count per VMA Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25Merge branch 'clockevents/4.0-rc1' of ↵Ingo Molnar
git://git.linaro.org/people/daniel.lezcano/linux into timers/urgent Pull clockevents driver fixes from Daniel Lezcano: - Fix the Kconfig to prevent the asm9260 timer to be compiled with allyesconfig with sparc/sparc64 (Daniel Lezcano) - Reorder the mtk driver init sequence in order to prevent a potential race when the clock is registered before the irq handler is set (Matthias Brugger) - Fix a section mismatch for the pxa driver (Robert Jarzmik) Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-25clocksource: pxa: Fix section mismatchRobert Jarzmik
As pxa_timer_common_init() is only called in init context, mark it as such, and quiesce the compiler warnings : WARNING: vmlinux.o(.text.unlikely+0x45d4): Section mismatch in reference from the function pxa_timer_common_init() to the function .init.text:sched_clock_register() WARNING: vmlinux.o(.text.unlikely+0x4610): Section mismatch in reference from the function pxa_timer_common_init() to the function .init.text:clocksource_mmio_init() Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-02-25clocksource: mtk: Fix race conditions in probe codeMatthias Brugger
We have two race conditions in the probe code which could lead to a null pointer dereference in the interrupt handler. The interrupt handler accesses the clockevent device, which may not yet be registered. First race condition happens when the interrupt handler gets registered before the interrupts get disabled. The second race condition happens when the interrupts get enabled, but the clockevent device is not yet registered. Fix that by disabling the interrupts before we register the interrupt and enable the interrupts after the clockevent device got registered. Reported-by: Gongbae Park <yongbae2@gmail.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-02-25clockevents: asm9260: Fix compilation error with sparc/sparc64 allyesconfigDaniel Lezcano
The Kconfig options for the asm9260 timer is wrong as it can be selected by another platform with allyes config and thus leading to a compilation failure as some non arch related code is pulled by the compilation. Fix this by having the platform Kconfig to select the timer as it is done for the others drivers. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Oleksij Rempel <linux@rempel-privat.de> Conflicts: drivers/clocksource/Kconfig
2015-02-25drm/i915: Fix frontbuffer false positve.Rodrigo Vivi
This return 0 without setting atomic bits on fb == crtc->cursor->fb where causing frontbuffer false positives. According to Daniel: The original regression seems to have been introduced in the original check/commit split: commit 757f9a3e5b8a812af0c213099a5b31cb423f4d3c Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Date: Wed Sep 24 14:20:24 2014 -0300 drm/i915: move check of intel_crtc_cursor_set_obj() out Which already cause other trouble, resulting in the check getting moved in commit e391ea882b1a04fb3f559287ac694652a3cd9da9 Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Date: Wed Sep 24 14:20:25 2014 -0300 drm/i915: Fix not checking cursor and object sizes The frontbuffer tracking itself only was broken when we shifted it into the check/commit logic with: commit 32b7eeec4d1e861230b09d437e95d76c86ff4a68 Author: Matt Roper <matthew.d.roper@intel.com> Date: Wed Dec 24 07:59:06 2014 -0800 drm/i915: Refactor work that can sleep out of commit (v7) v2: When putting more debug prints I notice the solution was simpler than I thought. AMS design is solid, just this return was wrong. Sorry for the noise. v3: Remove the entire chunck that would probably be removed by gcc anyway. (by Daniel) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-25ALSA: hda - Disable runtime PM for Panther Point againTakashi Iwai
This is essentially a partial revert of the commit [b1920c21102a: 'ALSA: hda - Enable runtime PM on Panther Point']. There was a bug report showing the HD-audio bus hang during runtime PM on HP Spectre XT. Reported-by: Dang Sananikone <dang.sananikone@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-24eCryptfs: ensure copy to crypt_stat->cipher does not overrunColin Ian King
The patch 237fead61998: "[PATCH] ecryptfs: fs/Makefile and fs/Kconfig" from Oct 4, 2006, leads to the following static checker warning: fs/ecryptfs/crypto.c:846 ecryptfs_new_file_context() error: off-by-one overflow 'crypt_stat->cipher' size 32. rl = '0-32' There is a mismatch between the size of ecryptfs_crypt_stat.cipher and ecryptfs_mount_crypt_stat.global_default_cipher_name causing the copy of the cipher name to cause a off-by-one string copy error. This fix ensures the space reserved for this string is the same size including the trailing zero at the end throughout ecryptfs. This fix avoids increasing the size of ecryptfs_crypt_stat.cipher and also ecryptfs_parse_tag_70_packet_silly_stack.cipher_string and instead reduces the of ECRYPTFS_MAX_CIPHER_NAME_SIZE to 31 and includes the + 1 for the end of string terminator. NOTE: An overflow is not possible in practice since the value copied into global_default_cipher_name is validated by ecryptfs_code_for_cipher_string() at mount time. None of the allowed cipher strings are long enough to cause the potential buffer overflow fixed by this patch. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [tyhicks: Added the NOTE about the overflow not being triggerable] Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
2015-02-25md: mark some attributes as pre-allocNeilBrown
Since __ATTR_PREALLOC was introduced in v3.19-rc1~78^2~18 it can now be used by md. This ensure that writing to these sysfs attributes will never block due to a memory allocation. Such blocking could become a deadlock if mdmon is trying to reconfigure an array after a failure prior to re-enabling writes. Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-25raid5: check faulty flag for array status during recovery.Eric Mei
When we have more than 1 drive failure, it's possible we start rebuild one drive while leaving another faulty drive in array. To determine whether array will be optimal after building, current code only check whether a drive is missing, which could potentially lead to data corruption. This patch is to add checking Faulty flag. Signed-off-by: NeilBrown <neilb@suse.de>
generated by cgit (git 2.34.1) at 2025-09-12 09:41:30 +0000