summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-01ALSA: hda - Fix digital mic on Acer Aspire 3830TGTakashi Iwai
Acer Aspire 3830TG with CX20588 codec has a digital built-in mic that has the same problem like many others, the inverted signal in stereo. Apply the same fixup to this machine, too. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-01arm64: fix bug for reloading FPSIMD state after cpu power offLeo Yan
Now arm64 defers reloading FPSIMD state, but this optimization also introduces the bug after cpu resume back from low power mode. The reason is after the cpu has been powered off, s/w need set the cpu's fpsimd_last_state to NULL so that it will force to reload FPSIMD state for the thread, otherwise there has the chance to meet the condition for both the task's fpsimd_state.cpu field contains the id of the current cpu, and the cpu's fpsimd_last_state per-cpu variable points to the task's fpsimd_state, so finally kernel will skip to reload the context during it return back to userland. Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Leo Yan <leoy@marvell.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-09-01netfilter: NETFILTER_XT_TARGET_LOG selects NF_LOG_*Pablo Neira Ayuso
CONFIG_NETFILTER_XT_TARGET_LOG is not selected anymore when jumping from 3.16 to 3.17-rc1 if you don't set on the new NF_LOG_IPV4 and NF_LOG_IPV6 switches. Change this to select the three new symbols NF_LOG_COMMON, NF_LOG_IPV4 and NF_LOG_IPV6 instead, so NETFILTER_XT_TARGET_LOG remains enabled when moving from old to new kernels. Reported-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-09-01drm/vmwgfx: Fix a potential infinite spin waiting for fifo idleThomas Hellstrom
The code waiting for fifo idle was incorrect and could possibly spin forever under certain circumstances. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reported-by: Mark Sheldon <markshel@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Reivewed-by: Mark Sheldon <markshel@vmware.com> Cc: <stable@vger.kernel.org>
2014-09-01drm/vmwgfx: Fix an incorrect OOM return valueThomas Hellstrom
At the same time, make error paths return early for clarity. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: jakob Bornecrantz <jakob@vmware.com> Cc: <stable@vger.kernel.org>
2014-09-01USB: sierra: add 1199:68AA device IDBjørn Mork
This VID:PID is used for some Direct IP devices behaving identical to the already supported 0F3D:68AA devices. Cc: <stable@vger.kernel.org> Reported-by: Lars Melin <larsm17@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-01USB: sierra: avoid CDC class functions on "68A3" devicesBjørn Mork
Sierra Wireless Direct IP devices using the 68A3 product ID can be configured for modes including a CDC ECM class function. The known example uses interface numbers 12 and 13 for the ECM control and data interfaces respectively, consistent with CDC MBIM function interface numbering on other Sierra devices. It seems cleaner to restrict this driver to the ff/ff/ff vendor specific interfaces rather than increasing the already long interface number blacklist. This should be more future proof if Sierra adds more class functions using interface numbers not yet in the blacklist. Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-01USB: ftdi_sio: add support for NOVITUS Bono E thermal printerJohan Hovold
Add device id for NOVITUS Bono E thermal printer. Reported-by: Emanuel Koczwara <poczta@emanuelkoczwara.pl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-01spi: fsl: Don't use devm_kzalloc in master->setup callbackAxel Lin
device_add() expects that any memory allocated via devm_* API is only done in the device's probe function. Fix below boot warning: [ 3.092348] WARNING: at drivers/base/dd.c:286 [ 3.096637] Modules linked in: [ 3.099697] CPU: 0 PID: 25 Comm: kworker/u2:1 Tainted: G W 3.16.1-s3k-drv-999-svn5771_knld-999 #158 [ 3.109610] Workqueue: deferwq deferred_probe_work_func [ 3.114736] task: c787f020 ti: c790c000 task.ti: c790c000 [ 3.120062] NIP: c01df158 LR: c01df144 CTR: 00000000 [ 3.124983] REGS: c790db30 TRAP: 0700 Tainted: G W (3.16.1-s3k-drv-999-svn5771_knld-999) [ 3.134162] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 22002082 XER: 20000000 [ 3.140703] [ 3.140703] GPR00: 00000001 c790dbe0 c787f020 00000044 00000054 00000308 c056da0e 20737069 [ 3.140703] GPR08: 33323736 000ebfe0 00000308 000ebfdf 22002082 00000000 c046c5a0 c046c608 [ 3.140703] GPR16: c046c614 c046c620 c046c62c c046c638 c046c648 c046c654 c046c68c c046c6c4 [ 3.140703] GPR24: 00000000 00000000 00000003 c0401aa0 c0596638 c059662c c054e7a8 c7996800 [ 3.170102] NIP [c01df158] driver_probe_device+0xf8/0x334 [ 3.175431] LR [c01df144] driver_probe_device+0xe4/0x334 [ 3.180633] Call Trace: [ 3.183093] [c790dbe0] [c01df144] driver_probe_device+0xe4/0x334 (unreliable) [ 3.190147] [c790dc10] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.195741] [c790dc40] [c01df5fc] device_attach+0xcc/0xf8 [ 3.201076] [c790dc60] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.206666] [c790dc80] [c01db9f8] device_add+0x270/0x564 [ 3.211923] [c790dcc0] [c0219e84] spi_add_device+0xc0/0x190 [ 3.217427] [c790dce0] [c021a79c] spi_register_master+0x720/0x834 [ 3.223455] [c790dd40] [c021cb48] of_fsl_spi_probe+0x55c/0x614 [ 3.229234] [c790dda0] [c01e0d2c] platform_drv_probe+0x30/0x74 [ 3.234987] [c790ddb0] [c01df18c] driver_probe_device+0x12c/0x334 [ 3.241008] [c790dde0] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.246602] [c790de10] [c01df5fc] device_attach+0xcc/0xf8 [ 3.251937] [c790de30] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.257536] [c790de50] [c01de9d8] deferred_probe_work_func+0x98/0xe0 [ 3.263816] [c790de70] [c00305b8] process_one_work+0x18c/0x440 [ 3.269577] [c790dea0] [c0030a00] worker_thread+0x194/0x67c [ 3.275105] [c790def0] [c0039198] kthread+0xd0/0xe4 [ 3.279911] [c790df40] [c000c6d0] ret_from_kernel_thread+0x5c/0x64 [ 3.285970] Instruction dump: [ 3.288900] 80de0000 419e01d0 3b7b0038 3c60c046 7f65db78 38635264 48211b99 813f00a0 [ 3.296559] 381f00a0 7d290278 3169ffff 7c0b4910 <0f000000> 93df0044 7fe3fb78 4bfffd4d Reported-by: leroy christophe <christophe.leroy@c-s.fr> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-09-01USB: zte_ev: fix removed PIDsJohan Hovold
Add back some PIDs that were mistakingly remove when reverting commit 73228a0538a7 ("USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"), which apparently did more than its commit message claimed in that it not only moved some PIDs from option to zte_ev but also added some new ones. Fixes: 63a901c06e3c ("Revert "USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"") Reported-by: Lei Liu <lei35151@163.com> Cc: stable <stable@vger.kernel.org>
2014-09-01m68k: Wire up memfd_createGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-09-01m68k: Wire up getrandomGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-09-01s390/vdso: remove NULL pointer check from clock_gettimeMartin Schwidefsky
The explicit NULL pointer check on the timespec argument is only required for clock_getres but not for clock_gettime. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-01s390/ipl: Add missing SCSI loadparm attributes to /sys/firmwareMichael Holzheu
Currently the loadparm is only supported for CCW IPL. But also for SCSI IPL it can be specified either on the HMC load panel respectively z/VM console or via diagnose 308. So fix this for SCSI and add the required sysfs attributes for reading the IPL loadparm and for setting the loadparm for re-IPL. With this patch the following two sysfs attributes are introduced: - /sys/firmware/ipl/loadparm (for system that have been IPLed from SCSI) - /sys/firmware/reipl/fcp/loadparm Because the loadparm is now available for SCSI and CCW it is moved now from "struct ipl_block_ccw" to the generic "struct ipl_list_hdr". Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-01s390/dasd: Make module parameter visible in sysfsPeter Oberparleiter
Change the visibility of the dasd parameter of kernel module dasd_mod to be consistent with the eer_pages parameter. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Acked-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-01iwlwifi: bump firmware API version to 10 for 7000 and 8000Emmanuel Grumbach
New firmware on the way. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-08-31Merge branch 'stmmac-eee'David S. Miller
Giuseppe Cavallaro says: ==================== stmmac EEE fixes This is a subset of patches to provide some fixes for the EEE support inside the driver. Patches have been tested on boards EEE capable plugged on switch w/ w/o EEE support. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-31stmmac: fix PLS bit setting when EEE is activeGiuseppe CAVALLARO
In case of PLS is active the PLS (PHY Link Status) bit in the Reg12 has to be set to allow the MAC to asserts the LPI pattern when the link is ok. Signed-off-by: nandini sharma <nandini.sharma@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-31stmmac: never check EEE in case of a switch is attachedGiuseppe CAVALLARO
This patch is to skip the EEE initialisation when the stmmac is using a switch (with a fixed phy support). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-31stmmac: fix LPI TW timer value to 20.5us.nandini sharma
The value for LPI TW timer has to be updated to 0x1E that is the hardcoded value of 20.5us and it will apply to all EEE enabled Remote PHYs. Disadvantage is for PHY's that support lesser wakeup time but we can accept it waiting to implement LLDP to negotiate the Wakeup time of Remote PHY. Signed-off-by: nandini sharma <nandini.sharma@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-31stmmac: fix the EEE LPI Macro definitions.nandini sharma
This patch is to fix the definition of macros for EEE otherwise the LPI TX/RX entry/exit cannot be properly managed. Signed-off-by: Nandini Sharma <nandini.sharma@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-31Linux 3.17-rc3v3.17-rc3Linus Torvalds
2014-08-31Merge tag 'xtensa-20140830' of git://github.com/czankel/xtensa-linuxLinus Torvalds
Pull Xtensa updates from Chris Zankel: "Xtensa improvements for 3.17: - support highmem on cores with aliasing data cache. Enable highmem on kc705 by default - simplify addition of new core variants (no need to modify Kconfig / Makefiles) - improve robustness of unaligned access handler and its interaction with window overflow/underflow exception handlers - deprecate atomic and spill registers syscalls - clean up Kconfig: remove orphan MATH_EMULATION, sort 'select' statements - wire up renameat2 syscall. Various fixes: - fix address checks in dma_{alloc,free}_coherent (runtime BUG) - fix access to THREAD_RA/THREAD_SP/THREAD_DS (debug build breakage) - fix TLBTEMP_BASE_2 region handling in fast_second_level_miss (runtime unrecoverable exception) - fix a6 and a7 handling in fast_syscall_xtensa (runtime userspace register clobbering) - fix kernel/user jump out of fast_unaligned (potential runtime unrecoverabl exception) - replace termios IOCTL code definitions with constants (userspace build breakage)" * tag 'xtensa-20140830' of git://github.com/czankel/xtensa-linux: (25 commits) xtensa: deprecate fast_xtensa and fast_spill_registers syscalls xtensa: don't allow overflow/underflow on unaligned stack xtensa: fix a6 and a7 handling in fast_syscall_xtensa xtensa: allow single-stepping through unaligned load/store xtensa: move invalid unaligned instruction handler closer to its users xtensa: make fast_unaligned store restartable xtensa: add double exception fixup handler for fast_unaligned xtensa: fix kernel/user jump out of fast_unaligned xtensa: configure kc705 for highmem xtensa: support highmem in aliasing cache flushing code xtensa: support aliasing cache in kmap xtensa: support aliasing cache in k[un]map_atomic xtensa: implement clear_user_highpage and copy_user_highpage xtensa: fix TLBTEMP_BASE_2 region handling in fast_second_level_miss xtensa: allow fixmap and kmap span more than one page table xtensa: make fixmap region addressing grow with index xtensa: fix access to THREAD_RA/THREAD_SP/THREAD_DS xtensa: add renameat2 syscall xtensa: fix address checks in dma_{alloc,free}_coherent xtensa: replace IOCTL code definitions with constants ...
2014-08-31unicore32: Fix build errorGuenter Roeck
unicore32 builds fail with arch/unicore32/kernel/signal.c: In function ‘setup_frame’: arch/unicore32/kernel/signal.c:257: error: ‘usig’ undeclared (first use in this function) arch/unicore32/kernel/signal.c:279: error: ‘usig’ undeclared (first use in this function) arch/unicore32/kernel/signal.c: In function ‘handle_signal’: arch/unicore32/kernel/signal.c:306: warning: unused variable ‘tsk’ arch/unicore32/kernel/signal.c: In function ‘do_signal’: arch/unicore32/kernel/signal.c:376: error: implicit declaration of function ‘get_signsl’ make[1]: *** [arch/unicore32/kernel/signal.o] Error 1 make: *** [arch/unicore32/kernel/signal.o] Error 2 Bisect points to commit 649671c90eaf ("unicore32: Use get_signal() signal_setup_done()"). This code never even compiled. Reverting the patch does not work, since previously used functions no longer exist, so try to fix it up. Compile tested only. Fixes: 649671c90eaf ("unicore32: Use get_signal() signal_setup_done()") Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-31Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Various assorted fixes: - a couple of patches from Mark Rutland to resolve an errata with Cortex-A15 CPUs. - fix cpuidle for the CPU part ID changes in the last merge window - add support for a relocation which ARM binutils is generating in some circumstances" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8130/1: cpuidle/cpuidle-big_little: fix reading cpu id part number ARM: 8129/1: errata: work around Cortex-A15 erratum 830321 using dummy strex ARM: 8128/1: abort: don't clear the exclusive monitors ARM: 8127/1: module: add support for R_ARM_TARGET1 relocations
2014-08-31Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Here's the weekly batch of fixes from arm-soc. The delta is a largeish negative delta, due to revert of SMP support for Broadcom's STB SoC -- it was accidentally merged before some issues had been addressed, so they will make a new attempt for 3.18. I didn't see a need for a full revert of the whole platform due to this, we're keeping the rest enabled. The rest is mostly: - a handful of DT fixes for i.MX (Hummingboard/Cubox-i in particular) - some MTD/NAND fixes for OMAP - minor DT fixes for shmobile - warning fix for UP builds on vexpress/spc There's also a couple of patches that wires up hwmod on TI's DRA7 SoC so it can boot. Drivers and the rest had landed for 3.17, and it's small and isolated so it made sense to pick up now even if it's not a bugfix" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) vexpress/spc: fix a build warning on array bounds ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants MAINTAINERS: catch special Rockchip code locations ARM: dts: microsom-ar8035: MDIO pad must be set open drain ARM: dts: omap54xx-clocks: Fix the l3 and l4 clock rates ARM: brcmstb: revert SMP support ARM: OMAP2+: hwmod: Rearm wake-up interrupts for DT when MUSB is idled ARM: dts: Enable UART wake-up events for beagleboard ARM: dts: Remove twl6030 clk32g "regulator" ARM: OMAP2+: omap_device: remove warning that clk alias already exists ARM: OMAP: fix %d confusingly prefixed with 0x in format string ARM: dts: DRA7: fix interrupt-cells for GPIO mtd: nand: omap: Fix 1-bit Hamming code scheme, omap_calculate_ecc() ARM: dts: omap3430-sdp: Revert to using software ECC for NAND ARM: OMAP2+: GPMC: Support Software ECC scheme via DT mtd: nand: omap: Revert to using software ECC by default ARM: dts: hummingboard/cubox-i: change SPDIF output to be more descriptive ARM: dts: hummingboard/cubox-i: add USB OC pinctrl configuration ARM: shmobile: r8a7791: add missing 0x0100 for SDCKCR ...
2014-08-31iwlwifi: Remove module build requirement for Intel Wireless WiFiMarcel Holtmann
The CONFIG_IWLDVM and CONFIG_IWLMVM currently have a "depends on m" as its requirement forcing it to be build as module. This is not needed and thus just remove it. Fixes: ae7486a2b734 ("iwlwifi: fix Kconfig issues") Signed-off-by: Marcel Holtmann <marcel@holtmann.org> [Squashed 2 commites for MVM and DVM] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-08-31Revert "iwlwifi: dvm: don't enable CTS to self"Emmanuel Grumbach
This reverts commit 43d826ca5979927131685cc2092c7ce862cb91cd. This commit caused packet loss. Cc: <stable@vger.kernel.org> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-08-31vexpress/spc: fix a build warning on array boundsAlex Shi
With ARCH_VEXPRESS_SPC option, kernel build has the following warning: arch/arm/mach-vexpress/spc.c: In function ‘ve_spc_clk_init’: arch/arm/mach-vexpress/spc.c:431:38: warning: array subscript is below array bounds [-Warray-bounds] struct ve_spc_opp *opps = info->opps[cluster]; ^ since 'cluster' maybe '-1' in UP system. This patch does a active checking to fix this issue. Signed-off-by: Alex Shi <alex.shi@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-31Merge tag 'for-v3.17-rc/omap-dra72x-d74x-support-a' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes Pull "ARM: OMAP2+: DRA72x/DRA74x basic support" from Tony Lindgren: Add basic subarchitecture support for the DRA72x and DRA74x. These are OMAP2+ derivative SoCs. This should be low-risk to existing OMAP platforms. Basic build, boot, and PM test logs are available here: http://www.pwsan.com/omap/testlogs/hwmod-a-early-v3.17-rc/20140827194314/ * tag 'for-v3.17-rc/omap-dra72x-d74x-support-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending: ARM: DRA7: hwmod: Add dra74x and dra72x specific ocp interface lists ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() variants Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-31Merge tag 'spi-v3.17-rc3-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi bugfixes from Mark Brown: "A smattering of bug fixes for the SPI subsystem, all in driver code which has seen active work recently and none of them with any great global impact. There's also a new ACPI ID for the pxa2xx driver which required no code changes and the addition of kerneldoc for some structure fields that were missing it and generating warnings during documentation builds as a result" * tag 'spi-v3.17-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: sh-msiof: Fix transmit-only DMA transfers spi/rockchip: Avoid accidentally turning off the clock spi: dw: fix kernel crash due to NULL pointer dereference spi: dw-pci: fix bug when regs left uninitialized spi: davinci: fix SPI_NO_CS functionality spi/rockchip: fixup incorrect dma direction setting spi/pxa2xx: Add ACPI ID for Intel Braswell spi: spi-au1550: fix build failure spi: rspi: Fix leaking of unused DMA descriptors spi: sh-msiof: Fix leaking of unused DMA descriptors spi: Add missing kerneldoc bits spi/omap-mcspi: Fix the spi task hangs waiting dma_rx
2014-08-31Merge remote-tracking branch 'spi/fix/sh-msiof' into spi-linusMark Brown
2014-08-31Merge tag 'spi-v3.17-rc3' into spi-linusMark Brown
spi: Bug fixes for v3.17 A smattering of bug fixes for the SPI subsystem, all in driver code which has seen active work recently and none of them with any great global impact. There's also a new ACPI ID for the pxa2xx driver which required no code changes and the addition of kerneldoc for some structure fields that were missing it and generating warnings during documentation builds as a result. # gpg: Signature made Sun 31 Aug 2014 13:19:12 BST using RSA key ID 7EA229BD # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
2014-08-31spi: sh-msiof: Fix transmit-only DMA transfersGeert Uytterhoeven
Fix tx/rx mixup, which broke transmit-only transfers. Introduced by commit 4240305f7cbdc7782aa8bc40cc702775d9ac0839 ("spi: sh-msiof: Fix leaking of unused DMA descriptors"). Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-31Merge remote-tracking branches 'regmap/fix/cache', 'regmap/fix/debugfs' and ↵Mark Brown
'regmap/fix/volatile' into regmap-linus
2014-08-31regmap: Don't attempt block writes when syncing cache on single_rw devicesMark Brown
If the device can't support block writes then don't attempt to use raw syncing which will automatically generate block writes for adjacent registers, use the existing _single() block syncing implementation. Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-08-30Merge tag 'locks-v3.17-3' of git://git.samba.org/jlayton/linuxLinus Torvalds
Pull file locking bugfx from Jeff Layton: "Just a bugfix for a bug that crept in to v3.15. It's in a rather rare error path, and I'm not aware of anyone having hit it, but it's worth fixing for v3.17" * tag 'locks-v3.17-3' of git://git.samba.org/jlayton/linux: locks: pass correct "before" pointer to locks_unlink_lock in generic_add_lease
2014-08-30fix EBUSY on umount() from MNT_SHRINKABLEAl Viro
We need the parents of victims alive until namespace_unlock() gets to dput() of the (ex-)mountpoints. However, that screws up the "is it busy" checks in case when we have shrinkable mounts that need to be killed. Solution: go ahead and decrement refcounts of parents right in umount_tree(), increment them again just before dropping rwsem in namespace_unlock() (and let the loop in the end of namespace_unlock() finally drop those references for good, as we do now). Parents can't get freed until we drop rwsem - at least one reference is kept until then, both in case when parent is among the victims and when it is not. So they'll still be around when we get to namespace_unlock(). Cc: stable@vger.kernel.org # 3.12+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-30get rid of propagate_umount() mistakenly treating slaves as busy.Al Viro
The check in __propagate_umount() ("has somebody explicitly mounted something on that slave?") is done *before* taking the already doomed victims out of the child lists. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-30Merge remote-tracking branches 'spi/fix/au1550', 'spi/fix/davinci', ↵Mark Brown
'spi/fix/doc', 'spi/fix/dw', 'spi/fix/omap-mcspi', 'spi/fix/pxa2xx', 'spi/fix/rockchip' and 'spi/fix/rspi' into spi-linus
2014-08-30Merge remote-tracking branch 'spi/fix/sh-msiof' into spi-linusMark Brown
2014-08-29net: sctp: fix ABI mismatch through sctp_assoc_to_state helperDaniel Borkmann
Since SCTP day 1, that is, 19b55a2af145 ("Initial commit") from lksctp tree, the official <netinet/sctp.h> header carries a copy of enum sctp_sstat_state that looks like (compared to the current in-kernel enumeration): User definition: Kernel definition: enum sctp_sstat_state { typedef enum { SCTP_EMPTY = 0, <removed> SCTP_CLOSED = 1, SCTP_STATE_CLOSED = 0, SCTP_COOKIE_WAIT = 2, SCTP_STATE_COOKIE_WAIT = 1, SCTP_COOKIE_ECHOED = 3, SCTP_STATE_COOKIE_ECHOED = 2, SCTP_ESTABLISHED = 4, SCTP_STATE_ESTABLISHED = 3, SCTP_SHUTDOWN_PENDING = 5, SCTP_STATE_SHUTDOWN_PENDING = 4, SCTP_SHUTDOWN_SENT = 6, SCTP_STATE_SHUTDOWN_SENT = 5, SCTP_SHUTDOWN_RECEIVED = 7, SCTP_STATE_SHUTDOWN_RECEIVED = 6, SCTP_SHUTDOWN_ACK_SENT = 8, SCTP_STATE_SHUTDOWN_ACK_SENT = 7, }; } sctp_state_t; This header was later on also placed into the uapi, so that user space programs can compile without having <netinet/sctp.h>, but the shipped with <linux/sctp.h> instead. While RFC6458 under 8.2.1.Association Status (SCTP_STATUS) says that sstat_state can range from SCTP_CLOSED to SCTP_SHUTDOWN_ACK_SENT, we nevertheless have a what it appears to be dummy SCTP_EMPTY state from the very early days. While it seems to do just nothing, commit 0b8f9e25b0aa ("sctp: remove completely unsed EMPTY state") did the right thing and removed this dead code. That however, causes an off-by-one when the user asks the SCTP stack via SCTP_STATUS API and checks for the current socket state thus yielding possibly undefined behaviour in applications as they expect the kernel to tell the right thing. The enumeration had to be changed however as based on the current socket state, we access a function pointer lookup-table through this. Therefore, I think the best way to deal with this is just to add a helper function sctp_assoc_to_state() to encapsulate the off-by-one quirk. Reported-by: Tristan Su <sooqing@gmail.com> Fixes: 0b8f9e25b0aa ("sctp: remove completely unsed EMPTY state") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-29net: attempt a single high order allocationEric Dumazet
In commit ed98df3361f0 ("net: use __GFP_NORETRY for high order allocations") we tried to address one issue caused by order-3 allocations. We still observe high latencies and system overhead in situations where compaction is not successful. Instead of trying order-3, order-2, and order-1, do a single order-3 best effort and immediately fallback to plain order-0. This mimics slub strategy to fallback to slab min order if the high order allocation used for performance failed. Order-3 allocations give a performance boost only if they can be done without recurring and expensive memory scan. Quoting David : The page allocator relies on synchronous (sync light) memory compaction after direct reclaim for allocations that don't retry and deferred compaction doesn't work with this strategy because the allocation order is always decreasing from the previous failed attempt. This means sync light compaction will always be encountered if memory cannot be defragmented or reclaimed several times during the skb_page_frag_refill() iteration. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-29Merge branch 'mlx4-net'David S. Miller
Or Gerlitz says: ==================== Setup mlx4 user space Ethernet QPs to properly handle VXLAN This short series fixes the mlx4 driver setting of user space Ethernet QPs (e.g those opened by DPDK applications) such that they will properly handle VXLAN traffic/offloads ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-29mlx4: Set user-space raw Ethernet QPs to properly handle VXLAN trafficOr Gerlitz
Raw Ethernet QPs opened from user-space lack the proper setup to recieve/handle VXLAN traffic when VXLAN offloads are enabled. Fix that by adding a tunnel steering rule on top of the normal unicast steering rule and set the tunnel_type field in the QP context. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-29net/mlx4: Move the tunnel steering helper function to mlx4_coreOr Gerlitz
Move the function which we use to set VXLAN DMFS (flow-steering) rules from mlx4_en to mlx4_core. This refactoring will allow the mlx4_ib driver to call the helper for the use case of user-space RAW Ethernet QPs, such that they can serve VXLAN traffic too. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-29stmmac: fix dma api misuseGiuseppe CAVALLARO
Enabling DMA_API_DEBUG, warnings are reported at runtime because the device driver frees DMA memory with wrong functions and it does not call dma_mapping_error after mapping dma memory. The first problem is fixed by of introducing a flag that helps us keeping track which mapping technique was used, so that we can use the right API for unmap. This approach was inspired by the e1000 driver, which uses a similar technique. Signed-off-by: Andre Draszik <andre.draszik@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Denis Kirjanov <kda@linux-powerpc.org> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-29stmmac: ptp: fix the reference clockGiuseppe CAVALLARO
The PTP reference clock, used for setting the addend in the Timestamp Addend Register, was erroneously hard-coded (as reported in the databook just as example). The patch removes the macro named: STMMAC_SYSCLOCK and allows to use a reference clock (clk_ptp_ref_i) that can be passed from the platform. If not passed, the main driver clock will be used as default; note that this can be fine on some platforms. Note that, prior this patch, using the old STMMAC_SYSCLOCK on some platforms, as side effect, the ptp clock can move faster/slower than the system clock. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-29stmmac: fix tipo on mmc crc errorGiuseppe CAVALLARO
This patch is to fix a typo on mmc rx crc error when reported by ethtool. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-29stmmac: prevent false carrier sense detectionGiuseppe CAVALLARO
This patch is to w/a a problem that happens on some boxes when run at 10Mbps Half duplex mode. During the transmission the CSR signal is asserted for some time and the frames aborted because of carrier sense error. This is reported by MMC HW counter: txcarrier signal. This actually is a false carrier so the frames are good and there is no reason to ask for dropping them. This patch so disables the Carrier Sense During Transmission and this means that the MAC transmitter ignore the CRS signal during frame transmission in Half-Duplex mode. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Vince Bridgers <vbridgers2013@gmail.com> Acked-by: Ley Foon Tan <lftan@altera.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 23:23:08 +0000