summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-04-23selftests/bpf: add bpf_wq testsBenjamin Tissoires
We simply try in all supported map types if we can store/load a bpf_wq. Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-10-6c986a5a741f@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-04-23tcp: Fix Use-After-Free in tcp_ao_connect_initHyunwoo Kim
Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal of tcp_ao_connect_init, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe. Fixes: 7c2ffaf21bd6 ("net/tcp: Calculate TCP-AO traffic keys") Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://lore.kernel.org/r/ZiYu9NJ/ClR8uSkH@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23neighbour: fix neigh_master_filtered()Eric Dumazet
If we no longer hold RTNL, we must use netdev_master_upper_dev_get_rcu() instead of netdev_master_upper_dev_get(). Fixes: ba0f78069423 ("neighbour: no longer hold RTNL in neigh_dump_info()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240421185753.1808077-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23net: usb: ax88179_178a: stop lying about skb->truesizeEric Dumazet
Some usb drivers try to set small skb->truesize and break core networking stacks. In this patch, I removed one of the skb->truesize overide. I also replaced one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize in rx path") Fixes: f8ebb3ac881b ("net: usb: ax88179_178a: Fix packet receiving") Reported-by: shironeko <shironeko@tesaguri.club> Closes: https://lore.kernel.org/netdev/c110f41a0d2776b525930f213ca9715c@tesaguri.club/ Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jose Alonso <joalonsof@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240421193828.1966195-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23ipv4: check for NULL idev in ip_route_use_hint()Eric Dumazet
syzbot was able to trigger a NULL deref in fib_validate_source() in an old tree [1]. It appears the bug exists in latest trees. All calls to __in_dev_get_rcu() must be checked for a NULL result. [1] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 2 PID: 3257 Comm: syz-executor.3 Not tainted 5.10.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:fib_validate_source+0xbf/0x15a0 net/ipv4/fib_frontend.c:425 Code: 18 f2 f2 f2 f2 42 c7 44 20 23 f3 f3 f3 f3 48 89 44 24 78 42 c6 44 20 27 f3 e8 5d 88 48 fc 4c 89 e8 48 c1 e8 03 48 89 44 24 18 <42> 80 3c 20 00 74 08 4c 89 ef e8 d2 15 98 fc 48 89 5c 24 10 41 bf RSP: 0018:ffffc900015fee40 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88800f7a4000 RCX: ffff88800f4f90c0 RDX: 0000000000000000 RSI: 0000000004001eac RDI: ffff8880160c64c0 RBP: ffffc900015ff060 R08: 0000000000000000 R09: ffff88800f7a4000 R10: 0000000000000002 R11: ffff88800f4f90c0 R12: dffffc0000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88800f7a4000 FS: 00007f938acfe6c0(0000) GS:ffff888058c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f938acddd58 CR3: 000000001248e000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip_route_use_hint+0x410/0x9b0 net/ipv4/route.c:2231 ip_rcv_finish_core+0x2c4/0x1a30 net/ipv4/ip_input.c:327 ip_list_rcv_finish net/ipv4/ip_input.c:612 [inline] ip_sublist_rcv+0x3ed/0xe50 net/ipv4/ip_input.c:638 ip_list_rcv+0x422/0x470 net/ipv4/ip_input.c:673 __netif_receive_skb_list_ptype net/core/dev.c:5572 [inline] __netif_receive_skb_list_core+0x6b1/0x890 net/core/dev.c:5620 __netif_receive_skb_list net/core/dev.c:5672 [inline] netif_receive_skb_list_internal+0x9f9/0xdc0 net/core/dev.c:5764 netif_receive_skb_list+0x55/0x3e0 net/core/dev.c:5816 xdp_recv_frames net/bpf/test_run.c:257 [inline] xdp_test_run_batch net/bpf/test_run.c:335 [inline] bpf_test_run_xdp_live+0x1818/0x1d00 net/bpf/test_run.c:363 bpf_prog_test_run_xdp+0x81f/0x1170 net/bpf/test_run.c:1376 bpf_prog_test_run+0x349/0x3c0 kernel/bpf/syscall.c:3736 __sys_bpf+0x45c/0x710 kernel/bpf/syscall.c:5115 __do_sys_bpf kernel/bpf/syscall.c:5201 [inline] __se_sys_bpf kernel/bpf/syscall.c:5199 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5199 Fixes: 02b24941619f ("ipv4: use dst hint for ipv4 list receive") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240421184326.1704930-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23net: fix sk_memory_allocated_{add|sub} vs softirqsEric Dumazet
Jonathan Heathcote reported a regression caused by blamed commit on aarch64 architecture. x86 happens to have irq-safe __this_cpu_add_return() and __this_cpu_sub(), but this is not generic. I think my confusion came from "struct sock" argument, because these helpers are called with a locked socket. But the memory accounting is per-proto (and per-cpu after the blamed commit). We might cleanup these helpers later to directly accept a "struct proto *proto" argument. Switch to this_cpu_add_return() and this_cpu_xchg() operations, and get rid of preempt_disable()/preempt_enable() pairs. Fast path becomes a bit faster as a result :) Many thanks to Jonathan Heathcote for his awesome report and investigations. Fixes: 3cd3399dd7a8 ("net: implement per-cpu reserves for memory_allocated") Reported-by: Jonathan Heathcote <jonathan.heathcote@bbc.co.uk> Closes: https://lore.kernel.org/netdev/VI1PR01MB42407D7947B2EA448F1E04EFD10D2@VI1PR01MB4240.eurprd01.prod.exchangelabs.com/ Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Link: https://lore.kernel.org/r/20240421175248.1692552-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23bpf: allow struct bpf_wq to be embedded in arraymaps and hashmapsBenjamin Tissoires
Currently bpf_wq_cancel_and_free() is just a placeholder as there is no memory allocation for bpf_wq just yet. Again, duplication of the bpf_timer approach Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-9-6c986a5a741f@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-04-23bpf: add support for KF_ARG_PTR_TO_WORKQUEUEBenjamin Tissoires
Introduce support for KF_ARG_PTR_TO_WORKQUEUE. The kfuncs will use bpf_wq as argument and that will be recognized as workqueue argument by verifier. bpf_wq_kern casting can happen inside kfunc, but using bpf_wq in argument makes life easier for users who work with non-kern type in BPF progs. Duplicate process_timer_func into process_wq_func. meta argument is only needed to ensure bpf_wq_init's workqueue and map arguments are coming from the same map (map_uid logic is necessary for correct inner-map handling), so also amend check_kfunc_args() to match what helpers functions check is doing. Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-8-6c986a5a741f@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-04-23bpf: verifier: bail out if the argument is not a mapBenjamin Tissoires
When a kfunc is declared with a KF_ARG_PTR_TO_MAP, we should have reg->map_ptr set to a non NULL value, otherwise, that means that the underlying type is not a map. Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-7-6c986a5a741f@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-04-23tools: sync include/uapi/linux/bpf.hBenjamin Tissoires
cp include/uapi/linux/bpf.h tools/include/uapi/linux/bpf.h Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-6-6c986a5a741f@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-04-23bpf: add support for bpf_wq user typeBenjamin Tissoires
Mostly a copy/paste from the bpf_timer API, without the initialization and free, as they will be done in a separate patch. Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-5-6c986a5a741f@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-04-23bpf: replace bpf_timer_cancel_and_free with a generic helperBenjamin Tissoires
Same reason than most bpf_timer* functions, we need almost the same for workqueues. So extract the generic part out of it so bpf_wq_cancel_and_free can reuse it. Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-4-6c986a5a741f@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-04-23bpf: replace bpf_timer_set_callback with a generic helperBenjamin Tissoires
In the same way we have a generic __bpf_async_init(), we also need to share code between timer and workqueue for the set_callback call. We just add an unused flags parameter, as it will be used for workqueues. Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-3-6c986a5a741f@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-04-23bpf: replace bpf_timer_init with a generic helperBenjamin Tissoires
No code change except for the new flags argument being stored in the local data struct. Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-2-6c986a5a741f@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-04-23bpf: make timer data struct more genericBenjamin Tissoires
To be able to add workqueues and reuse most of the timer code, we need to make bpf_hrtimer more generic. There is no code change except that the new struct gets a new u64 flags attribute. We are still below 2 cache lines, so this shouldn't impact the current running codes. The ordering is also changed. Everything related to async callback is now on top of bpf_hrtimer. Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-1-6c986a5a741f@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-04-24regulator: change devm_regulator_get_enable_optional() stub to return OkMatti Vaittinen
The devm_regulator_get_enable_optional() should be a 'call and forget' API, meaning, when it is used to enable the regulators, the API does not provide a handle to do any further control of the regulators. It gives no real benefit to return an error from the stub if CONFIG_REGULATOR is not set. On the contrary, returning an error is causing problems to drivers when hardware is such it works out just fine with no regulator control. Returning an error forces drivers to specifically handle the case where CONFIG_REGULATOR is not set, making the mere existence of the stub questionalble. Change the stub implementation for the devm_regulator_get_enable_optional() to return Ok so drivers do not separately handle the case where the CONFIG_REGULATOR is not set. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Fixes: da279e6965b3 ("regulator: Add devm helpers for get and enable") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/ZiedtOE00Zozd3XO@fedora Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-23Revert "NFSD: Convert the callback workqueue to use delayed_work"Chuck Lever
This commit was a pre-requisite for commit c1ccfcf1a9bf ("NFSD: Reschedule CB operations when backchannel rpc_clnt is shut down"), which has already been reverted. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-04-23Revert "NFSD: Reschedule CB operations when backchannel rpc_clnt is shut down"Chuck Lever
The reverted commit attempted to enable NFSD to retransmit pending callback operations if an NFS client disconnects, but unintentionally introduces a hazardous behavior regression if the client becomes permanently unreachable while callback operations are still pending. A disconnect can occur due to network partition or if the NFS server needs to force the NFS client to retransmit (for example, if a GSS window under-run occurs). Reverting the commit will make NFSD behave the same as it did in v6.8 and before. Pending callback operations are permanently lost if the client connection is terminated before the client receives them. For some callback operations, this loss is not harmful. However, for CB_RECALL, the loss means a delegation might be revoked unnecessarily. For CB_OFFLOAD, pending COPY operations will never complete unless the NFS client subsequently sends an OFFLOAD_STATUS operation, which the Linux NFS client does not currently implement. These issues still need to be addressed somehow. Reported-by: Dai Ngo <dai.ngo@oracle.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=218735 Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-04-23usb: typec: qcom-pmic: fix pdphy start() error handlingJohan Hovold
Move disabling of the vdd-pdphy supply to the start() function which enabled it for symmetry and to make sure that it is disabled as intended in all error paths of pmic_typec_pdphy_reset() (i.e. not just when qcom_pmic_typec_pdphy_enable() fails). Cc: stable+noautosel@kernel.org # Not needed in any stable release, just a minor bugfix Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240418145730.4605-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23usb: typec: qcom-pmic: fix use-after-free on late probe errorsJohan Hovold
Make sure to stop and deregister the port in case of late probe errors to avoid use-after-free issues when the underlying memory is released by devres. Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver") Cc: stable@vger.kernel.org # 6.5 Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240418145730.4605-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23usb: gadget: f_fs: Fix a race condition when processing setup packets.Chris Wulff
If the USB driver passes a pointer into the TRB buffer for creq, this buffer can be overwritten with the status response as soon as the event is queued. This can make the final check return USB_GADGET_DELAYED_STATUS when it shouldn't. Instead use the stored wLength. Fixes: 4d644abf2569 ("usb: gadget: f_fs: Only return delayed status when len is 0") Cc: stable <stable@kernel.org> Signed-off-by: Chris Wulff <chris.wulff@biamp.com> Link: https://lore.kernel.org/r/CO1PR17MB5419BD664264A558B2395E28E1112@CO1PR17MB5419.namprd17.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23USB: core: Fix access violation during port device removalAlan Stern
Testing with KASAN and syzkaller revealed a bug in port.c:disable_store(): usb_hub_to_struct_hub() can return NULL if the hub that the port belongs to is concurrently removed, but the function does not check for this possibility before dereferencing the returned value. It turns out that the first dereference is unnecessary, since hub->intfdev is the parent of the port device, so it can be changed easily. Adding a check for hub == NULL prevents further problems. The same bug exists in the disable_show() routine, and it can be fixed the same way. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Yue Sun <samsun1006219@gmail.com> Reported-by: xingwei lee <xrivendell7@gmail.com> Link: https://lore.kernel.org/linux-usb/CAEkJfYON+ry7xPx=AiLR9jzUNT+i_Va68ACajOC3HoacOfL1ig@mail.gmail.com/ Fixes: f061f43d7418 ("usb: hub: port: add sysfs entry to switch port power") CC: Michael Grzeschik <m.grzeschik@pengutronix.de> CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/393aa580-15a5-44ca-ad3b-6462461cd313@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23usb: dwc3: core: Prevent phy suspend during initThinh Nguyen
GUSB3PIPECTL.SUSPENDENABLE and GUSB2PHYCFG.SUSPHY should be cleared during initialization. Suspend during initialization can result in undefined behavior due to clock synchronization failure, which often seen as core soft reset timeout. The programming guide recommended these bits to be cleared during initialization for DWC_usb3.0 version 1.94 and above (along with DWC_usb31 and DWC_usb32). The current check in the driver does not account if it's set by default setting from coreConsultant. This is especially the case for DRD when switching mode to ensure the phy clocks are available to change mode. Depending on the platforms/design, some may be affected more than others. This is noted in the DWC_usb3x programming guide under the above registers. Let's just disable them during driver load and mode switching. Restore them when the controller initialization completes. Note that some platforms workaround this issue by disabling phy suspend through "snps,dis_u3_susphy_quirk" and "snps,dis_u2_susphy_quirk" when they should not need to. Cc: stable@vger.kernel.org Fixes: 9ba3aca8fe82 ("usb: dwc3: Disable phy suspend after power-on reset") Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20da4e5a0c4678c9587d3da23f83bdd6d77353e9.1713394973.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23usb: xhci-plat: Don't include xhci.hThinh Nguyen
The xhci_plat.h should not need to include the entire xhci.h header. This can cause redefinition in dwc3 if it selectively includes some xHCI definitions. This is a prerequisite change for a fix to disable suspend during initialization for dwc3. Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/310acfa01c957a10d9feaca3f7206269866ba2eb.1713394973.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23usb: gadget: uvc: use correct buffer size when parsing configfs listsIvan Avdeev
This commit fixes uvc gadget support on 32-bit platforms. Commit 0df28607c5cb ("usb: gadget: uvc: Generalise helper functions for reuse") introduced a helper function __uvcg_iter_item_entries() to aid with parsing lists of items on configfs attributes stores. This function is a generalization of another very similar function, which used a stack-allocated temporary buffer of fixed size for each item in the list and used the sizeof() operator to check for potential buffer overruns. The new function was changed to allocate the now variably sized temp buffer on heap, but wasn't properly updated to also check for max buffer size using the computed size instead of sizeof() operator. As a result, the maximum item size was 7 (plus null terminator) on 64-bit platforms, and 3 on 32-bit ones. While 7 is accidentally just barely enough, 3 is definitely too small for some of UVC configfs attributes. For example, dwFrameInteval, specified in 100ns units, usually has 6-digit item values, e.g. 166666 for 60fps. Cc: stable@vger.kernel.org Fixes: 0df28607c5cb ("usb: gadget: uvc: Generalise helper functions for reuse") Signed-off-by: Ivan Avdeev <me@provod.works> Link: https://lore.kernel.org/r/20240413150124.1062026-1-me@provod.works Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23usb: gadget: composite: fix OS descriptors w_value logicPeter Korsgaard
The OS descriptors logic had the high/low byte of w_value inverted, causing the extended properties to not be accessible for interface != 0. >From the Microsoft documentation: https://learn.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-os-1-0-descriptors-specification OS_Desc_CompatID.doc (w_index = 0x4): - wValue: High Byte = InterfaceNumber. InterfaceNumber is set to the number of the interface or function that is associated with the descriptor, typically 0x00. Because a device can have only one extended compat ID descriptor, it should ignore InterfaceNumber, regardless of the value, and simply return the descriptor. Low Byte = 0. PageNumber is used to retrieve descriptors that are larger than 64 KB. The header section is 16 bytes, so PageNumber is set to 0 for this request. We currently do not support >64KB compat ID descriptors, so verify that the low byte is 0. OS_Desc_Ext_Prop.doc (w_index = 0x5): - wValue: High byte = InterfaceNumber. The high byte of wValue is set to the number of the interface or function that is associated with the descriptor. Low byte = PageNumber. The low byte of wValue is used to retrieve descriptors that are larger than 64 KB. The header section is 10 bytes, so PageNumber is set to 0 for this request. We also don't support >64KB extended properties, so verify that the low byte is 0 and use the high byte for the interface number. Fixes: 37a3a533429e ("usb: gadget: OS Feature Descriptors support") Cc: stable <stable@kernel.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Link: https://lore.kernel.org/r/20240404100635.3215340-1-peter@korsgaard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23usb: gadget: f_fs: Fix race between aio_cancel() and AIO request completeWesley Cheng
FFS based applications can utilize the aio_cancel() callback to dequeue pending USB requests submitted to the UDC. There is a scenario where the FFS application issues an AIO cancel call, while the UDC is handling a soft disconnect. For a DWC3 based implementation, the callstack looks like the following: DWC3 Gadget FFS Application dwc3_gadget_soft_disconnect() ... --> dwc3_stop_active_transfers() --> dwc3_gadget_giveback(-ESHUTDOWN) --> ffs_epfile_async_io_complete() ffs_aio_cancel() --> usb_ep_free_request() --> usb_ep_dequeue() There is currently no locking implemented between the AIO completion handler and AIO cancel, so the issue occurs if the completion routine is running in parallel to an AIO cancel call coming from the FFS application. As the completion call frees the USB request (io_data->req) the FFS application is also referencing it for the usb_ep_dequeue() call. This can lead to accessing a stale/hanging pointer. commit b566d38857fc ("usb: gadget: f_fs: use io_data->status consistently") relocated the usb_ep_free_request() into ffs_epfile_async_io_complete(). However, in order to properly implement locking to mitigate this issue, the spinlock can't be added to ffs_epfile_async_io_complete(), as usb_ep_dequeue() (if successfully dequeuing a USB request) will call the function driver's completion handler in the same context. Hence, leading into a deadlock. Fix this issue by moving the usb_ep_free_request() back to ffs_user_copy_worker(), and ensuring that it explicitly sets io_data->req to NULL after freeing it within the ffs->eps_lock. This resolves the race condition above, as the ffs_aio_cancel() routine will not continue attempting to dequeue a request that has already been freed, or the ffs_user_copy_work() not freeing the USB request until the AIO cancel is done referencing it. This fix depends on commit b566d38857fc ("usb: gadget: f_fs: use io_data->status consistently") Fixes: 2e4c7553cd6f ("usb: gadget: f_fs: add aio support") Cc: stable <stable@kernel.org> # b566d38857fc ("usb: gadget: f_fs: use io_data->status consistently") Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20240409014059.6740-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-23ACPI: PM: s2idle: Evaluate all Low-Power S0 Idle _DSM functionsRafael J. Wysocki
Commit 073237281a50 ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems") attempted to avoid evaluating the same Low- Power S0 Idle _DSM functions for different UUIDs, but that turns out to be a mistake, because some systems in the field are adversely affected by it. Address this by allowing all Low-Power S0 Idle _DSM functions to be evaluated, but still print the message regarding duplication of Low- Power S0 Idle _DSM function sets for different UUIDs. Fixes: 073237281a50 ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218750 Reported-and-tested-by: Mark Pearson <mpearson@lenovo.com> Suggested-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
2024-04-23Merge branch 'selftests-drv-net-support-testing-with-a-remote-system'Jakub Kicinski
Jakub Kicinski says: ==================== selftests: drv-net: support testing with a remote system Implement support for tests which require access to a remote system / endpoint which can generate traffic. This series concludes the "groundwork" for upstream driver tests. I wanted to support the three models which came up in discussions: - SW testing with netdevsim - "local" testing with two ports on the same system in a loopback - "remote" testing via SSH so there is a tiny bit of an abstraction which wraps up how "remote" commands are executed. Otherwise hopefully there's nothing surprising. I'm only adding a ping test. I had a bigger one written but I was worried we'll get into discussing the details of the test itself and how I chose to hack up netdevsim, instead of the test infra... So that test will be a follow up :) v4: https://lore.kernel.org/all/20240418233844.2762396-1-kuba@kernel.org v3: https://lore.kernel.org/all/20240417231146.2435572-1-kuba@kernel.org v2: https://lore.kernel.org/all/20240416004556.1618804-1-kuba@kernel.org v1: https://lore.kernel.org/all/20240412233705.1066444-1-kuba@kernel.org ==================== Link: https://lore.kernel.org/r/20240420025237.3309296-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23selftests: drv-net: add require_XYZ() helpers for validating envJakub Kicinski
Wrap typical checks like whether given command used by the test is available in helpers. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240420025237.3309296-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23selftests: drv-net: add a TCP ping test case (and useful helpers)Jakub Kicinski
More complex tests often have to spawn a background process, like a server which will respond to requests or tcpdump. Add support for creating such processes using the with keyword: with bkg("my-daemon", ..): # my-daemon is alive in this block My initial thought was to add this support to cmd() directly but it runs the command in the constructor, so by the time we __enter__ it's too late to make sure we used "background=True". Second useful helper transplanted from net_helper.sh is wait_port_listen(). The test itself uses socat, which insists on v6 addresses being wrapped in [], it's not the only command which requires this format, so add the wrapped address to env. The hope is to save test code from checking if address is v6. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240420025237.3309296-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23selftests: net: support matching cases by name prefixJakub Kicinski
While writing tests with a lot more cases I got tired of having to jump back and forth to add the name of the test to the ksft_run() list. Most unittest frameworks do some name matching, e.g. assume that functions with names starting with test_ are test cases. Support similar flow in ksft_run(). Let the author list the desired prefixes. globals() need to be passed explicitly, IDK how to work around that. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240420025237.3309296-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23selftests: drv-net: add a trivial ping testJakub Kicinski
Add a very simple test for testing with a remote system. Both IPv4 and IPv6 connectivity is optional, later change will add checks to skip tests based on available addresses. Using netdevsim: $ ./run_kselftest.sh -t drivers/net:ping.py TAP version 13 1..1 # timeout set to 45 # selftests: drivers/net: ping.py # KTAP version 1 # 1..2 # ok 1 ping.test_v4 # ok 2 ping.test_v6 # # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0 ok 1 selftests: drivers/net: ping.py Command line SSH: $ NETIF=virbr0 REMOTE_TYPE=ssh REMOTE_ARGS=root@192.168.122.123 \ LOCAL_V4=192.168.122.1 REMOTE_V4=192.168.122.123 \ ./tools/testing/selftests/drivers/net/ping.py KTAP version 1 1..2 ok 1 ping.test_v4 ok 2 ping.test_v6 # SKIP Test requires IPv6 connectivity # Totals: pass:1 fail:0 xfail:1 xpass:0 skip:0 error:0 Existing devices placed in netns (and using net.config): $ cat drivers/net/net.config NETIF=veth0 REMOTE_TYPE=netns REMOTE_ARGS=red LOCAL_V4="192.168.1.1" REMOTE_V4="192.168.1.2" $ ./run_kselftest.sh -t drivers/net:ping.py TAP version 13 1..1 # timeout set to 45 # selftests: drivers/net: ping.py # KTAP version 1 # 1..2 # ok 1 ping.test_v4 # ok 2 ping.test_v6 # SKIP Test requires IPv6 connectivity # # Totals: pass:1 fail:0 xfail:1 xpass:0 skip:0 error:0 Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240420025237.3309296-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23selftests: drv-net: construct environment for running tests which require an ↵Jakub Kicinski
endpoint Nothing surprising here, hopefully. Wrap the variables from the environment into a class or spawn a netdevsim based env and pass it to the tests. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240420025237.3309296-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23selftests: drv-net: factor out parsing of the envJakub Kicinski
The tests with a remote end will use a different class, for clarity, but will also need to parse the env. So factor parsing the env out to a function. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240420025237.3309296-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23selftests: drv-net: define endpoint structuresJakub Kicinski
Define the remote endpoint "model". To execute most meaningful device driver tests we need to be able to communicate with a remote system, and have it send traffic to the device under test. Various test environments will have different requirements. 0) "Local" netdevsim-based testing can simply use net namespaces. netdevsim supports connecting two devices now, to form a veth-like construct. 1) Similarly on hosts with multiple NICs, the NICs may be connected together with a loopback cable or internal device loopback. One interface may be placed into separate netns, and tests would proceed much like in the netdevsim case. Note that the loopback config or the moving of one interface into a netns is not expected to be part of selftest code. 2) Some systems may need to communicate with the remote endpoint via SSH. 3) Last but not least environment may have its own custom communication method. Fundamentally we only need two operations: - run a command remotely - deploy a binary (if some tool we need is built as part of kselftests) Wrap these two in a class. Use dynamic loading to load the Remote class. This will allow very easy definition of other communication methods without bothering upstream code base. Stick to the "simple" / "no unnecessary abstractions" model for referring to the remote endpoints. The host / remote object are passed as an argument to the usual cmd() or ip() invocation. For example: ip("link show", json=True, host=remote) Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240420025237.3309296-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23Merge branch 'netdev-support-dumping-a-single-netdev-in-qstats'Jakub Kicinski
Jakub Kicinski says: ==================== netdev: support dumping a single netdev in qstats I was writing a test for page pool which depended on qstats, and got tired of having to filter dumps in user space. Add support for dumping stats for a single netdev. To get there we first need to add full support for extack in dumps (and fix a dump error handling bug in YNL, sent separately to the net tree). ==================== Link: https://lore.kernel.org/r/20240420023543.3300306-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23selftests: drv-net: test dumping qstats per deviceJakub Kicinski
Add a test for dumping qstats device by device. ksft framework grows a ksft_raises() helper, to be used under with, which should be familiar to unittest users. Link: https://lore.kernel.org/r/20240420023543.3300306-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23netlink: support all extack types in dumpsJakub Kicinski
Note that when this commit message refers to netlink dump it only means the actual dumping part, the parsing / dump start is handled by the same code as "doit". Commit 4a19edb60d02 ("netlink: Pass extack to dump handlers") added support for returning extack messages from dump handlers, but left out other extack info, e.g. bad attribute. This used to be fine because until YNL we had little practical use for the machine readable attributes, and only messages were used in practice. YNL flips the preference 180 degrees, it's now much more useful to point to a bad attr with NL_SET_BAD_ATTR() than type an English message saying "attribute XYZ is $reason-why-bad". Support all of extack. The fact that extack only gets added if it fits remains unaddressed. Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240420023543.3300306-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23netlink: move extack writing helpersJakub Kicinski
Next change will need them in netlink_dump_done(), pure move. Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240420023543.3300306-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23netdev: support dumping a single netdev in qstatsJakub Kicinski
Having to filter the right ifindex in the tests is a bit tedious. Add support for dumping qstats for a single ifindex. Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240420023543.3300306-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23Merge tag '6.9-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: - fscache fix - fix for case where we could use uninitialized lease - add tracepoint for debugging refcounting of tcon - fix mount option regression (e.g. forceuid vs. noforceuid when uid= specified) caused by conversion to the new mount API * tag '6.9-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: reinstate original behavior again for forceuid/forcegid smb: client: fix rename(2) regression against samba cifs: Add tracing for the cifs_tcon struct refcounting cifs: Fix reacquisition of volume cookie on still-live connection
2024-04-23workqueue: Fix selection of wake_cpu in kick_pool()Sven Schnelle
With cpu_possible_mask=0-63 and cpu_online_mask=0-7 the following kernel oops was observed: smp: Bringing up secondary CPUs ... smp: Brought up 1 node, 8 CPUs Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000803 [..] Call Trace: arch_vcpu_is_preempted+0x12/0x80 select_idle_sibling+0x42/0x560 select_task_rq_fair+0x29a/0x3b0 try_to_wake_up+0x38e/0x6e0 kick_pool+0xa4/0x198 __queue_work.part.0+0x2bc/0x3a8 call_timer_fn+0x36/0x160 __run_timers+0x1e2/0x328 __run_timer_base+0x5a/0x88 run_timer_softirq+0x40/0x78 __do_softirq+0x118/0x388 irq_exit_rcu+0xc0/0xd8 do_ext_irq+0xae/0x168 ext_int_handler+0xbe/0xf0 psw_idle_exit+0x0/0xc default_idle_call+0x3c/0x110 do_idle+0xd4/0x158 cpu_startup_entry+0x40/0x48 rest_init+0xc6/0xc8 start_kernel+0x3c4/0x5e0 startup_continue+0x3c/0x50 The crash is caused by calling arch_vcpu_is_preempted() for an offline CPU. To avoid this, select the cpu with cpumask_any_and_distribute() to mask __pod_cpumask with cpu_online_mask. In case no cpu is left in the pool, skip the assignment. tj: This doesn't fully fix the bug as CPUs can still go down between picking the target CPU and the wake call. Fixing that likely requires adding cpu_online() test to either the sched or s390 arch code. However, regardless of how that is fixed, workqueue shouldn't be picking a CPU which isn't online as that would result in unpredictable and worse behavior. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Fixes: 8639ecebc9b1 ("workqueue: Implement non-strict affinity scope for unbound workqueues") Cc: stable@vger.kernel.org # v6.6+ Signed-off-by: Tejun Heo <tj@kernel.org>
2024-04-23riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMINClément Léger
The current definition yields a negative 32bits signed value which result in a mask with is obviously incorrect. Replace it by using a 1ULL bit shift value to obtain a single set bit mask. Fixes: 5dadda5e6a59 ("riscv: hwprobe: export Zvfh[min] ISA extensions") Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240409143839.558784-1-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-04-23tools: ynl: don't ignore errors in NLMSG_DONE messagesJakub Kicinski
NLMSG_DONE contains an error code, it has to be extracted. Prior to this change all dumps will end in success, and in case of failure the result is silently truncated. Fixes: e4b48ed460d3 ("tools: ynl: add a completely generic client") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240420020827.3288615-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-23af_unix: Don't access successor in unix_del_edges() during GC.Kuniyuki Iwashima
syzbot reported use-after-free in unix_del_edges(). [0] What the repro does is basically repeat the following quickly. 1. pass a fd of an AF_UNIX socket to itself socketpair(AF_UNIX, SOCK_DGRAM, 0, [3, 4]) = 0 sendmsg(3, {..., msg_control=[{cmsg_len=20, cmsg_level=SOL_SOCKET, cmsg_type=SCM_RIGHTS, cmsg_data=[4]}], ...}, 0) = 0 2. pass other fds of AF_UNIX sockets to the socket above socketpair(AF_UNIX, SOCK_SEQPACKET, 0, [5, 6]) = 0 sendmsg(3, {..., msg_control=[{cmsg_len=48, cmsg_level=SOL_SOCKET, cmsg_type=SCM_RIGHTS, cmsg_data=[5, 6]}], ...}, 0) = 0 3. close all sockets Here, two skb are created, and every unix_edge->successor is the first socket. Then, __unix_gc() will garbage-collect the two skb: (a) free skb with self-referencing fd (b) free skb holding other sockets After (a), the self-referencing socket will be scheduled to be freed later by the delayed_fput() task. syzbot repeated the sequences above (1. ~ 3.) quickly and triggered the task concurrently while GC was running. So, at (b), the socket was already freed, and accessing it was illegal. unix_del_edges() accesses the receiver socket as edge->successor to optimise GC. However, we should not do it during GC. Garbage-collecting sockets does not change the shape of the rest of the graph, so we need not call unix_update_graph() to update unix_graph_grouped when we purge skb. However, if we clean up all loops in the unix_walk_scc_fast() path, unix_graph_maybe_cyclic remains unchanged (true), and __unix_gc() will call unix_walk_scc_fast() continuously even though there is no socket to garbage-collect. To keep that optimisation while fixing UAF, let's add the same updating logic of unix_graph_maybe_cyclic in unix_walk_scc_fast() as done in unix_walk_scc() and __unix_walk_scc(). Note that when unix_del_edges() is called from other places, the receiver socket is always alive: - sendmsg: the successor's sk_refcnt is bumped by sock_hold() unix_find_other() for SOCK_DGRAM, connect() for SOCK_STREAM - recvmsg: the successor is the receiver, and its fd is alive [0]: BUG: KASAN: slab-use-after-free in unix_edge_successor net/unix/garbage.c:109 [inline] BUG: KASAN: slab-use-after-free in unix_del_edge net/unix/garbage.c:165 [inline] BUG: KASAN: slab-use-after-free in unix_del_edges+0x148/0x630 net/unix/garbage.c:237 Read of size 8 at addr ffff888079c6e640 by task kworker/u8:6/1099 CPU: 0 PID: 1099 Comm: kworker/u8:6 Not tainted 6.9.0-rc4-next-20240418-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: events_unbound __unix_gc Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 unix_edge_successor net/unix/garbage.c:109 [inline] unix_del_edge net/unix/garbage.c:165 [inline] unix_del_edges+0x148/0x630 net/unix/garbage.c:237 unix_destroy_fpl+0x59/0x210 net/unix/garbage.c:298 unix_detach_fds net/unix/af_unix.c:1811 [inline] unix_destruct_scm+0x13e/0x210 net/unix/af_unix.c:1826 skb_release_head_state+0x100/0x250 net/core/skbuff.c:1127 skb_release_all net/core/skbuff.c:1138 [inline] __kfree_skb net/core/skbuff.c:1154 [inline] kfree_skb_reason+0x16d/0x3b0 net/core/skbuff.c:1190 __skb_queue_purge_reason include/linux/skbuff.h:3251 [inline] __skb_queue_purge include/linux/skbuff.h:3256 [inline] __unix_gc+0x1732/0x1830 net/unix/garbage.c:575 process_one_work kernel/workqueue.c:3218 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3299 worker_thread+0x86d/0xd70 kernel/workqueue.c:3380 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 14427: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:312 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3897 [inline] slab_alloc_node mm/slub.c:3957 [inline] kmem_cache_alloc_noprof+0x135/0x290 mm/slub.c:3964 sk_prot_alloc+0x58/0x210 net/core/sock.c:2074 sk_alloc+0x38/0x370 net/core/sock.c:2133 unix_create1+0xb4/0x770 unix_create+0x14e/0x200 net/unix/af_unix.c:1034 __sock_create+0x490/0x920 net/socket.c:1571 sock_create net/socket.c:1622 [inline] __sys_socketpair+0x33e/0x720 net/socket.c:1773 __do_sys_socketpair net/socket.c:1822 [inline] __se_sys_socketpair net/socket.c:1819 [inline] __x64_sys_socketpair+0x9b/0xb0 net/socket.c:1819 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1805: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2190 [inline] slab_free mm/slub.c:4393 [inline] kmem_cache_free+0x145/0x340 mm/slub.c:4468 sk_prot_free net/core/sock.c:2114 [inline] __sk_destruct+0x467/0x5f0 net/core/sock.c:2208 sock_put include/net/sock.h:1948 [inline] unix_release_sock+0xa8b/0xd20 net/unix/af_unix.c:665 unix_release+0x91/0xc0 net/unix/af_unix.c:1049 __sock_release net/socket.c:659 [inline] sock_close+0xbc/0x240 net/socket.c:1421 __fput+0x406/0x8b0 fs/file_table.c:422 delayed_fput+0x59/0x80 fs/file_table.c:445 process_one_work kernel/workqueue.c:3218 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3299 worker_thread+0x86d/0xd70 kernel/workqueue.c:3380 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 The buggy address belongs to the object at ffff888079c6e000 which belongs to the cache UNIX of size 1920 The buggy address is located 1600 bytes inside of freed 1920-byte region [ffff888079c6e000, ffff888079c6e780) Reported-by: syzbot+f3f3eef1d2100200e593@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f3f3eef1d2100200e593 Fixes: 77e5593aebba ("af_unix: Skip GC if no cycle exists.") Fixes: fd86344823b5 ("af_unix: Try not to hold unix_gc_lock during accept().") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240419235102.31707-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-23wifi: rtw89: coex: Re-order the index for the report from firmwareChing-Te Ku
The report index has changed, correct the index for the corresponding firmware version. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240418021207.32173-10-pkshih@realtek.com
2024-04-23wifi: rtw89: coex: Add coexistence firmware control report version 8Ching-Te Ku
This report summary monitor the firmware related counters, firmware version. It will help to analysis the communication between driver and firmware. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240418021207.32173-9-pkshih@realtek.com
2024-04-23wifi: rtw89: coex: Add GPIO signal control version 7Ching-Te Ku
The feature can help to know how the firmware mechanism working. There are several trigger point set in firmware. If driver send the H2C command to firmware to enable the trigger, firmware will toggle GPIO to perform the firmware mechanism. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240418021207.32173-8-pkshih@realtek.com
2024-04-23wifi: rtw89: coex: Add register monitor report v7 formatChing-Te Ku
To avoid driver I/O, firmware will periodic monitor the register settings and update to driver. The v7 report adjust the structure variables order, so driver does changes accordingly. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240418021207.32173-7-pkshih@realtek.com
generated by cgit (git 2.34.1) at 2025-09-15 11:21:27 +0000