| Age | Commit message (Collapse) | Author |
|---|
|
The devm_regulator_get_enable() should be a 'call and forget' API,
meaning, when it is used to enable the regulators, the API does not
provide a handle to do any further control of the regulators. It gives
no real benefit to return an error from the stub if CONFIG_REGULATOR is
not set.
On the contrary, returning and error is causing problems to drivers when
hardware is such it works out just fine with no regulator control.
Returning an error forces drivers to specifically handle the case where
CONFIG_REGULATOR is not set, making the mere existence of the stub
questionalble. Furthermore, the stub of the regulator_enable() seems to
be returning Ok.
Change the stub implementation for the devm_regulator_get_enable() to
return Ok so drivers do not separately handle the case where the
CONFIG_REGULATOR is not set.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reported-by: Aleksander Mazur <deweloper@wp.pl>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: da279e6965b3 ("regulator: Add devm helpers for get and enable")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/ZiYF6d1V1vSPcsJS@drtxq0yyyyyyyyyyyyyby-3.rev.dnainternet.fi
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Static checkers complain that the silicon_uid variable passed by
pointer to cs35l56_read_silicon_uid() could later be used
uninitialised when calling cs_amp_get_efi_calibration_data().
cs35l56_read_silicon_uid() must have succeeded to call
cs_amp_get_efi_calibration_data() and that would have populated the
variable.
However, initialise the value so we are not haunted by it forevermore.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Fixes: e1830f66f6c6 ("ASoC: cs35l56: Add helper functions for amp calibration")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240422103211.236063-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver currently doesn't support any control flags.
Use flow_rule_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240418161821.189263-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20240418161802.189247-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Only compile tested, no hardware available.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240418161751.189226-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure that the provided netdev name is not one of its aliases to
prevent unnecessary creation and destruction of the vport by
ovs-vswitchd.
Signed-off-by: Jun Gu <jun.gu@easystack.cn>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20240419061425.132723-1-jun.gu@easystack.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Donald Hunter says:
====================
netlink: Add nftables spec w/ multi messages
This series adds a ynl spec for nftables and extends ynl with a --multi
command line option that makes it possible to send transactional batches
for nftables.
This series includes a patch for nfnetlink which adds ACK processing for
batch begin/end messages. If you'd prefer that to be sent separately to
nf-next then I can do so, but I included it here so that it gets seen in
context.
An example of usage is:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nftables.yaml \
--multi batch-begin '{"res-id": 10}' \
--multi newtable '{"name": "test", "nfgen-family": 1}' \
--multi newchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \
--multi batch-end '{"res-id": 10}'
[None, None, None, None]
It can also be used for bundling get requests:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nftables.yaml \
--multi gettable '{"name": "test", "nfgen-family": 1}' \
--multi getchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \
--output-json
[{"name": "test", "use": 1, "handle": 1, "flags": [],
"nfgen-family": 1, "version": 0, "res-id": 2},
{"table": "test", "name": "chain", "handle": 1, "use": 0,
"nfgen-family": 1, "version": 0, "res-id": 2}]
There are 2 issues that may be worth resolving:
- ynl reports errors by raising an NlError exception so only the first
error gets reported. This could be changed to add errors to the list
of responses so that multiple errors could be reported.
- If any message does not get a response (e.g. batch-begin w/o patch 2)
then ynl waits indefinitely. A recv timeout could be added which
would allow ynl to terminate.
====================
Link: https://lore.kernel.org/r/20240418104737.77914-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The NLM_F_ACK flag is ignored for nfnetlink batch begin and end
messages. This is a problem for ynl which wants to receive an ack for
every message it sends, not just the commands in between the begin/end
messages.
Add processing for ACKs for begin/end messages and provide responses
when requested.
I have checked that iproute2, pyroute2 and systemd are unaffected by
this change since none of them use NLM_F_ACK for batch begin/end.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240418104737.77914-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a "--multi <do-op> <json>" command line to ynl that makes it
possible to add several operations to a single netlink request payload.
The --multi command line option is repeated for each operation.
This is used by the nftables family for transaction batches. For
example:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nftables.yaml \
--multi batch-begin '{"res-id": 10}' \
--multi newtable '{"name": "test", "nfgen-family": 1}' \
--multi newchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \
--multi batch-end '{"res-id": 10}'
[None, None, None, None]
It can also be used for bundling get requests:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nftables.yaml \
--multi gettable '{"name": "test", "nfgen-family": 1}' \
--multi getchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \
--output-json
[{"name": "test", "use": 1, "handle": 1, "flags": [],
"nfgen-family": 1, "version": 0, "res-id": 2},
{"table": "test", "name": "chain", "handle": 1, "use": 0,
"nfgen-family": 1, "version": 0, "res-id": 2}]
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240418104737.77914-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NetlinkProtocol.decode() was looking up ops by response value which breaks
when it is used for extack decoding of directional ops. Instead, pass
the op to decode().
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240418104737.77914-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a spec for nftables that has nearly complete coverage of the ops,
but limited coverage of rule types and subexpressions.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240418104737.77914-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pavel Begunkov says:
====================
implement io_uring notification (ubuf_info) stacking (net part)
To have per request buffer notifications each zerocopy io_uring send
request allocates a new ubuf_info. However, as an skb can carry only
one uarg, it may force the stack to create many small skbs hurting
performance in many ways.
The patchset implements notification, i.e. an io_uring's ubuf_info
extension, stacking. It attempts to link ubuf_info's into a list,
allowing to have multiple of them per skb.
liburing/examples/send-zerocopy shows up 6 times performance improvement
for TCP with 4KB bytes per send, and levels it with MSG_ZEROCOPY. Without
the patchset it requires much larger sends to utilise all potential.
bytes | before | after (Kqps)
1200 | 195 | 1023
4000 | 193 | 1386
8000 | 154 | 1058
====================
Link: https://lore.kernel.org/all/cover.1713369317.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull smb server fixes from Steve French:
"Five ksmbd server fixes, most also for stable:
- rename fix
- two fixes for potential out of bounds
- fix for connections from MacOS (padding in close response)
- fix for when to enable persistent handles"
* tag '6.9-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: add continuous availability share parameter
ksmbd: common: use struct_group_attr instead of struct_group for network_open_info
ksmbd: clear RENAME_NOREPLACE before calling vfs_rename
ksmbd: validate request buffer size in smb2_allocate_rsp_buf()
ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf
|
|
At the moment an skb can only have one ubuf_info associated with it,
which might be a performance problem for zerocopy sends in cases like
TCP via io_uring. Add a callback for assigning ubuf_info to skb, this
way we will implement smarter assignment later like linking ubuf_info
together.
Note, it's an optional callback, which should be compatible with
skb_zcopy_set(), that's because the net stack might potentially decide
to clone an skb and take another reference to ubuf_info whenever it
wishes. Also, a correct implementation should always be able to bind to
an skb without prior ubuf_info, otherwise we could end up in a situation
when the send would not be able to progress.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/all/b7918aadffeb787c84c9e72e34c729dc04f3a45d.1713369317.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We'll need to associate additional callbacks with ubuf_info, introduce
a structure holding ubuf_info callbacks. Apart from a more smarter
io_uring notification management introduced in next patches, it can be
used to generalise msg_zerocopy_put_abort() and also store
->sg_from_iter, which is currently passed in struct msghdr.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/all/a62015541de49c0e2a8a0377a1d5d0a5aeb07016.1713369317.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When KUnit tests are enabled, under very big kernel configurations
(e.g. `allyesconfig`), we can trigger a `rustdoc` ICE [1]:
RUSTDOC TK rust/kernel/lib.rs
error: the compiler unexpectedly panicked. this is a bug.
The reason is that this build step has a duplicated `@rustc_cfg` argument,
which contains the kernel configuration, and thus a lot of arguments. The
factor 2 happens to be enough to reach the ICE.
Thus remove the unneeded `@rustc_cfg`. By doing so, we clean up the
command and workaround the ICE.
The ICE has been fixed in the upcoming Rust 1.79 [2].
Cc: stable@vger.kernel.org
Fixes: a66d733da801 ("rust: support running Rust documentation tests as KUnit ones")
Link: https://github.com/rust-lang/rust/issues/122722 [1]
Link: https://github.com/rust-lang/rust/pull/122840 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240422091215.526688-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The thread that calls the module initialisation code when a module is
loaded is not guaranteed [in fact, it is unlikely] to be the same one
that calls the module cleanup code on module unload, therefore, `Module`
implementations must be `Send` to account for them moving from one
thread to another implicitly.
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Cc: stable@vger.kernel.org # 6.8.x: df70d04d5697: rust: phy: implement `Send` for `Registration`
Cc: stable@vger.kernel.org
Fixes: 247b365dc8dc ("rust: add `kernel` crate")
Link: https://lore.kernel.org/r/20240328195457.225001-3-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
In preparation for requiring `Send` for `Module` implementations in the
next patch.
Cc: FUJITA Tomonori <fujita.tomonori@gmail.com>
Cc: Trevor Gross <tmgross@umich.edu>
Cc: netdev@vger.kernel.org
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240328195457.225001-2-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Eric Dumazet says:
====================
tcp: avoid sending too small packets
tcp_sendmsg() cooks 'large' skbs, that are later split
if needed from tcp_write_xmit().
After a split, the leftover skb size is smaller than the optimal
size, and this causes a performance drop.
In this series, tcp_grow_skb() helper is added to shift
payload from the second skb in the write queue to the first
skb to always send optimal sized skbs.
This increases TSO efficiency, and decreases number of ACK
packets.
====================
Link: https://lore.kernel.org/r/20240418214600.1291486-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While investigating TCP performance, I found that TCP would
sometimes send big skbs followed by a single MSS skb,
in a 'locked' pattern.
For instance, BIG TCP is enabled, MSS is set to have 4096 bytes
of payload per segment. gso_max_size is set to 181000.
This means that an optimal TCP packet size should contain
44 * 4096 = 180224 bytes of payload,
However, I was seeing packets sizes interleaved in this pattern:
172032, 8192, 172032, 8192, 172032, 8192, <repeat>
tcp_tso_should_defer() heuristic is defeated, because after a split of
a packet in write queue for whatever reason (this might be a too small
CWND or a small enough pacing_rate),
the leftover packet in the queue is smaller than the optimal size.
It is time to try to make 'leftover packets' bigger so that
tcp_tso_should_defer() can give its full potential.
After this patch, we can see the following output:
14:13:34.009273 IP6 sender > receiver: Flags [P.], seq 4048380:4098360, ack 1, win 256, options [nop,nop,TS val 3425678144 ecr 1561784500], length 49980
14:13:34.010272 IP6 sender > receiver: Flags [P.], seq 4098360:4148340, ack 1, win 256, options [nop,nop,TS val 3425678145 ecr 1561784501], length 49980
14:13:34.011271 IP6 sender > receiver: Flags [P.], seq 4148340:4198320, ack 1, win 256, options [nop,nop,TS val 3425678146 ecr 1561784502], length 49980
14:13:34.012271 IP6 sender > receiver: Flags [P.], seq 4198320:4248300, ack 1, win 256, options [nop,nop,TS val 3425678147 ecr 1561784503], length 49980
14:13:34.013272 IP6 sender > receiver: Flags [P.], seq 4248300:4298280, ack 1, win 256, options [nop,nop,TS val 3425678148 ecr 1561784504], length 49980
14:13:34.014271 IP6 sender > receiver: Flags [P.], seq 4298280:4348260, ack 1, win 256, options [nop,nop,TS val 3425678149 ecr 1561784505], length 49980
14:13:34.015272 IP6 sender > receiver: Flags [P.], seq 4348260:4398240, ack 1, win 256, options [nop,nop,TS val 3425678150 ecr 1561784506], length 49980
14:13:34.016270 IP6 sender > receiver: Flags [P.], seq 4398240:4448220, ack 1, win 256, options [nop,nop,TS val 3425678151 ecr 1561784507], length 49980
14:13:34.017269 IP6 sender > receiver: Flags [P.], seq 4448220:4498200, ack 1, win 256, options [nop,nop,TS val 3425678152 ecr 1561784508], length 49980
14:13:34.018276 IP6 sender > receiver: Flags [P.], seq 4498200:4548180, ack 1, win 256, options [nop,nop,TS val 3425678153 ecr 1561784509], length 49980
14:13:34.019259 IP6 sender > receiver: Flags [P.], seq 4548180:4598160, ack 1, win 256, options [nop,nop,TS val 3425678154 ecr 1561784510], length 49980
With 200 concurrent flows on a 100Gbit NIC, we can see a reduction
of TSO packets (and ACK packets) of about 30 %.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240418214600.1291486-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_write_xmit() calls tcp_init_tso_segs()
to set gso_size and gso_segs on the packet.
tcp_init_tso_segs() requires the stack to maintain
an up to date tcp_skb_pcount(), and this makes sense
for packets in rtx queue. Not so much for packets
still in the write queue.
In the following patch, we don't want to deal with
tcp_skb_pcount() when moving payload from 2nd
skb to 1st skb in the write queue.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240418214600.1291486-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_cwnd_test() has a special handing for the last packet in
the write queue if it is smaller than one MSS and has the FIN flag.
This is in violation of TCP RFC, and seems quite dubious.
This packet can be sent only if the current CWND is bigger
than the number of packets in flight.
Making tcp_cwnd_test() result independent of the first skb
in the write queue is needed for the last patch of the series.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240418214600.1291486-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tariq Toukan says:
====================
mlx5e per-queue coalescing
This patchset adds ethtool per-queue coalescing support for the mlx5e
driver.
The series introduce some changes needed as preparations for the final
patch which adds the support and implements the callbacks. Main
changes:
- DIM code movements into its own header file.
- Switch to dynamic allocation of the DIM struct in the RQs/SQs.
- Allow coalescing config change without channels reset when possible.
====================
Link: https://lore.kernel.org/r/20240419080445.417574-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use mlx5 on-the-fly coalescing configuration support to enable individual
channel configuration.
Co-developed-by: Nabil S. Alramli <dev@nalramli.com>
Signed-off-by: Nabil S. Alramli <dev@nalramli.com>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240419080445.417574-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When CQE mode or DIM state is changed, gracefully reconfigure channels to
handle new configuration. Previously, would create new channels that would
reflect the changes rather than update the original channels.
Co-developed-by: Nabil S. Alramli <dev@nalramli.com>
Signed-off-by: Nabil S. Alramli <dev@nalramli.com>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240419080445.417574-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make it possible for the DIM structure to be torn down while an SQ or RQ is
still active. Changing the CQ period mode is an example where the previous
sampling done with the DIM structure would need to be invalidated.
Co-developed-by: Nabil S. Alramli <dev@nalramli.com>
Signed-off-by: Nabil S. Alramli <dev@nalramli.com>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240419080445.417574-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use core DIM CQ period mode enum values for the CQ parameter for the period
mode. Translate the value to the specific mlx5 device constant for the
selected period mode when creating a CQ. Avoid needing to translate mlx5
device constants to DIM constants for core DIM functionality.
Co-developed-by: Nabil S. Alramli <dev@nalramli.com>
Signed-off-by: Nabil S. Alramli <dev@nalramli.com>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240419080445.417574-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a header specifically for DIM-related declarations. Move existing
DIM-specific functionality from en.h. Future DIM-related functionality will
be declared in en/dim.h in subsequent patches.
Co-developed-by: Nabil S. Alramli <dev@nalramli.com>
Signed-off-by: Nabil S. Alramli <dev@nalramli.com>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240419080445.417574-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pawel Dembicki says:
====================
net: dsa: vsc73xx: convert to PHYLINK and do some cleanup
This patch series is a result of splitting a larger patch series [0],
where some parts needed to be refactored.
The first patch switches from a poll loop to read_poll_timeout.
The second patch is a simple conversion to phylink because adjust_link
won't work anymore.
The third patch is preparation for future use. Using the
"phy_interface_mode_is_rgmii" macro allows for the proper recognition
of all RGMII modes.
Patches 4-5 involve some cleanup: The fourth patch introduces
a definition with the maximum number of ports to avoid using
magic numbers. The next one fills in documentation.
[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=841034&state=%2A&archive=both
====================
Link: https://lore.kernel.org/r/20240417205048.3542839-1-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit adds updates to the documentation describing the structures
used in vsc73xx. This will help prevent kdoc-related issues in the future.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://lore.kernel.org/r/20240417205048.3542839-6-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch introduces a new define: VSC73XX_MAX_NUM_PORTS, which can be
used in the future instead of a hardcoded value.
Currently, the only hardcoded value is vsc->ds->num_ports. It is being
replaced with the new define.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240417205048.3542839-5-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's preparation for future use. At this moment, the RGMII port is used
only for a connection to the MAC interface, but in the future, someone
could connect a PHY to it. Using the "phy_interface_mode_is_rgmii" macro
allows for the proper recognition of all RGMII modes.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240417205048.3542839-4-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch replaces the adjust_link api with the phylink apis that provide
equivalent functionality.
The remaining functionality from the adjust_link is now covered in the
mac_link_* and mac_config from phylink_mac_ops structure.
Removes:
.adjust_link
Adds phylink_mac_ops structure:
.mac_config
.mac_link_up
.mac_link_down
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://lore.kernel.org/r/20240417205048.3542839-3-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch the delay loop during the Arbiter empty check from
vsc73xx_adjust_link() to use read_poll_timeout(). Functionally,
one msleep() call is eliminated at the end of the loop in the timeout
case.
As Russell King suggested:
"This [change] avoids the issue that on the last iteration, the code reads
the register, tests it, finds the condition that's being waiting for is
false, _then_ waits and end up printing the error message - that last
wait is rather useless, and as the arbiter state isn't checked after
waiting, it could be that we had success during the last wait."
Suggested-by: Russell King <linux@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://lore.kernel.org/r/20240417205048.3542839-2-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During module probe, regulator 'vin' and 'vdd-io' are used and enabled,
but the vdd-io regulator overwrites the 'vin' regulator pointer. During
remove, only the vdd-io is disabled, as the vin regulator pointer is not
available anymore. When regulator_put() is called during resource
cleanup a kernel warning is given, as the regulator is still enabled.
Store the two regulators in separate pointers and disable both the
regulators on module remove.
Fixes: 49d22c70aaf0 ("NFC: trf7970a: Add device tree option of 1.8 Volt IO voltage")
Signed-off-by: Paul Geurts <paul_geurts@live.nl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/DB7PR09MB26847A4EBF88D9EDFEB1DA0F950E2@DB7PR09MB2684.eurprd09.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Current maintainer Douglas Miller has left IBM and no replacement has
been assigned for the driver. The eHEA hardware was last used on
IBM POWER7 systems, the last of which reached end-of-support at the
end of 2020.
Signed-off-by: David Christensen <drc@linux.ibm.com>
Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20240418195517.528577-1-drc@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit cleans up the uapi for vhost_vdpa by
better naming some of the enums which report blk
information to user space, and they are not
in any official releases yet.
Fixes: 1ac61ddfee93 ("vDPA: report virtio-blk flush info to user space")
Fixes: ae1374b7f72c ("vDPA: report virtio-block read-only info to user space")
Fixes: 330b8aea6924 ("vDPA: report virtio-block max segment size to user space")
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240415111047.1047774-1-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Pull bcachefs fixes from Kent Overstreet:
"Nothing too crazy in this one, and it looks like (fingers crossed) the
recovery and repair issues are settling down - although there's going
to be a long tail there, as we've still yet to really ramp up on error
injection or syzbot.
- fix a few more deadlocks in recovery
- fix u32/u64 issues in mi_btree_bitmap
- btree key cache shrinker now actually frees, with more
instrumentation coming so we can verify that it's working
correctly more easily in the future"
* tag 'bcachefs-2024-04-22' of https://evilpiepirate.org/git/bcachefs:
bcachefs: If we run merges at a lower watermark, they must be nonblocking
bcachefs: Fix inode early destruction path
bcachefs: Fix deadlock in journal write path
bcachefs: Tweak btree key cache shrinker so it actually frees
bcachefs: bkey_cached.btree_trans_barrier_seq needs to be a ulong
bcachefs: Fix missing call to bch2_fs_allocator_background_exit()
bcachefs: Check for journal entries overruning end of sb clean section
bcachefs: Fix bio alloc in check_extent_checksum()
bcachefs: fix leak in bch2_gc_write_reflink_key
bcachefs: KEY_TYPE_error is allowed for reflink
bcachefs: Fix bch2_dev_btree_bitmap_marked_sectors() shift
bcachefs: make sure to release last journal pin in replay
bcachefs: node scan: ignore multiple nodes with same seq if interior
bcachefs: Fix format specifier in validate_bset_keys()
bcachefs: Fix null ptr deref in twf from BCH_IOCTL_FSCK_OFFLINE
|
|
mv88e6250_phylink_get_caps()
With the recent PHYLINK changes requiring supported_interfaces to be set,
MV88E6250 family switches like the 88E6020 fail to probe - cmode is
never initialized on these devices, so mv88e6250_phylink_get_caps() does
not set any supported_interfaces flags.
Instead of a cmode, on 88E6250 we have a read-only port mode value that
encodes similar information. There is no reason to bother mapping port
mode to the cmodes of other switch models; instead we introduce a
mv88e6250_setup_supported_interfaces() that is called directly from
mv88e6250_phylink_get_caps().
Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240417103737.166651-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New driver specific parameter 'tx_scheduling_layers' was introduced.
Describe parameter in the documentation.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It was observed that Tx performance was inconsistent across all queues
and/or VSIs and that it was directly connected to existing 9-layer
topology of the Tx scheduler.
Introduce new private devlink param - tx_scheduling_layers. This parameter
gives user flexibility to choose the 5-layer transmit scheduler topology
which helps to smooth out the transmit performance.
Allowed parameter values are 5 and 9.
Example usage:
Show:
devlink dev param show pci/0000:4b:00.0 name tx_scheduling_layers
pci/0000:4b:00.0:
name tx_scheduling_layers type driver-specific
values:
cmode permanent value 9
Set:
devlink dev param set pci/0000:4b:00.0 name tx_scheduling_layers value 5
cmode permanent
devlink dev param set pci/0000:4b:00.0 name tx_scheduling_layers value 9
cmode permanent
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Introduce support for Tx scheduler topology change, based on user
selection, from default 9-layer to 5-layer.
Change requires NVM (version 3.20 or newer) and DDP package (OS Package
1.3.30 or newer - available for over a year in linux-firmware, since
commit aed71f296637 in linux-firmware ("ice: Update package to 1.3.30.0"))
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=aed71f296637
Enable 5-layer topology switch in init path of the driver. To accomplish
that upload of the DDP package needs to be delayed, until change in Tx
topology is finished. To trigger the Tx change user selection should be
changed in NVM using devlink. Then the platform should be rebooted.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Adjust the VSI/Aggregator layers based on the number of logical layers
supported by the FW. Currently the VSI and Aggregator layers are
fixed based on the 9 layer scheduler tree layout. Due to performance
reasons the number of layers of the scheduler tree is changing from
9 to 5. It requires a readjustment of these VSI/Aggregator layer values.
Signed-off-by: Raj Victor <victor.raj@intel.com>
Co-developed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There is a performance issue when the number of VSIs are not multiple
of 8. This is caused due to the max children limitation per node(8) in
9 layer topology. The BW credits are shared evenly among the children
by default. Assume one node has 8 children and the other has 1.
The parent of these nodes share the BW credit equally among them.
Apparently this causes a problem for the first node which has 8 children.
The 9th VM get more BW credits than the first 8 VMs.
Example:
1) With 8 VM's:
for x in 0 1 2 3 4 5 6 7;
do taskset -c ${x} netperf -P0 -H 172.68.169.125 & sleep .1 ; done
tx_queue_0_packets: 23283027
tx_queue_1_packets: 23292289
tx_queue_2_packets: 23276136
tx_queue_3_packets: 23279828
tx_queue_4_packets: 23279828
tx_queue_5_packets: 23279333
tx_queue_6_packets: 23277745
tx_queue_7_packets: 23279950
tx_queue_8_packets: 0
2) With 9 VM's:
for x in 0 1 2 3 4 5 6 7 8;
do taskset -c ${x} netperf -P0 -H 172.68.169.125 & sleep .1 ; done
tx_queue_0_packets: 24163396
tx_queue_1_packets: 24164623
tx_queue_2_packets: 24163188
tx_queue_3_packets: 24163701
tx_queue_4_packets: 24163683
tx_queue_5_packets: 24164668
tx_queue_6_packets: 23327200
tx_queue_7_packets: 24163853
tx_queue_8_packets: 91101417
So on average queue 8 statistics show that 3.7 times more packets were
send there than to the other queues.
The FW starting with version 3.20, has increased the max number of
children per node by reducing the number of layers from 9 to 5. Reflect
this on driver side.
Signed-off-by: Raj Victor <victor.raj@intel.com>
Co-developed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Extend devlink_param *set function pointer to take extack as a param.
Sometimes it is needed to pass information to the end user from set
function. It is more proper to use for that netlink instead of passing
message to dmesg.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix an NFS/RDMA performance regression in v6.9-rc
* tag 'nfsd-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "svcrdma: Add Write chunk WRs to the RPC's Send WR chain"
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-fixes
Pull Qualcomm clk driver fixes from Bjorn Andersson:
The introduction of support for the external VDD_GFX supply in SA8295P
ADP unearthed a lockdep problem in the GDSC code w.r.t regulator
supplies. Make the regulator optional, to avoid creating a dummy
regulator, on those boards that doesn't use this. While not solving the
root cause of the problem, it reduces the impact of the lockdep warning
- and it avoids wasting resources.
Refactoring of the RPM clock driver accidentally removed num_clks from
msm8976. Reintroduce this to get the clocks back.
* tag 'qcom-clk-fixes-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
clk: qcom: smd-rpm: Restore msm8976 num_clk
clk: qcom: gdsc: treat optional supplies as optional
|
|
When redirecting a packet using XDP, the bpf_redirect_map() helper will set
up the redirect destination information in struct bpf_redirect_info (using
the __bpf_xdp_redirect_map() helper function), and the xdp_do_redirect()
function will read this information after the XDP program returns and pass
the frame on to the right redirect destination.
When using the BPF_F_BROADCAST flag to do multicast redirect to a whole
map, __bpf_xdp_redirect_map() sets the 'map' pointer in struct
bpf_redirect_info to point to the destination map to be broadcast. And
xdp_do_redirect() reacts to the value of this map pointer to decide whether
it's dealing with a broadcast or a single-value redirect. However, if the
destination map is being destroyed before xdp_do_redirect() is called, the
map pointer will be cleared out (by bpf_clear_redirect_map()) without
waiting for any XDP programs to stop running. This causes xdp_do_redirect()
to think that the redirect was to a single target, but the target pointer
is also NULL (since broadcast redirects don't have a single target), so
this causes a crash when a NULL pointer is passed to dev_map_enqueue().
To fix this, change xdp_do_redirect() to react directly to the presence of
the BPF_F_BROADCAST flag in the 'flags' value in struct bpf_redirect_info
to disambiguate between a single-target and a broadcast redirect. And only
read the 'map' pointer if the broadcast flag is set, aborting if that has
been cleared out in the meantime. This prevents the crash, while keeping
the atomic (cmpxchg-based) clearing of the map pointer itself, and without
adding any more checks in the non-broadcast fast path.
Fixes: e624d4ed4aa8 ("xdp: Extend xdp_redirect_map with broadcast support")
Reported-and-tested-by: syzbot+af9492708df9797198d6@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20240418071840.156411-1-toke@redhat.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
commit 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system
memory accesses") modified cpc_read()/cpc_write() to use access_width to
read CPC registers.
However, for PCC registers the access width field in the ACPI register
macro specifies the PCC subspace ID. For non-zero PCC subspace ID it is
incorrectly treated as access width. This causes errors when reading
from PCC registers in the CPPC driver.
For PCC registers, base the size of read/write on the bit width field.
The debug message in cpc_read()/cpc_write() is updated to print relevant
information for the address space type used to read the register.
Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Tested-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for
system memory accesses") neglected to properly wrap the bit_offset shift
when it comes to applying the mask. This may cause incorrect values to be
read and may cause the cpufreq module not be loaded.
[ 11.059751] cpu_capacity: CPU0 missing/invalid highest performance.
[ 11.066005] cpu_capacity: partial information: fallback to 1024 for all CPUs
Also, corrected the bitmask generation in GENMASK (extra bit being added).
Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Jarred White <jarredwhite@linux.microsoft.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Reviewed-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
