summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-06netfilter: nf_tables: place all set backends in one single modulePablo Neira Ayuso
This patch disallows rbtree with single elements, which is causing problems with the recent timeout support. Before this patch, you could opt out individual set representations per module, which is just adding extra complexity. Fixes: 8d8540c4f5e0("netfilter: nft_set_rbtree: add timeout support") Reported-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-06netfilter: nf_tproxy: fix possible non-linear access to transport headerMáté Eckl
This patch fixes a silent out-of-bound read possibility that was present because of the misuse of this function. Mostly it was called with a struct udphdr *hp which had only the udphdr part linearized by the skb_header_pointer, however nf_tproxy_get_sock_v{4,6} uses it as a tcphdr pointer, so some reads for tcp specific attributes may be invalid. Fixes: a583636a83ea ("inet: refactor inet[6]_lookup functions to take skb") Signed-off-by: Máté Eckl <ecklm94@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-06ipv4: Return EINVAL when ping_group_range sysctl doesn't map to user nsTyler Hicks
The low and high values of the net.ipv4.ping_group_range sysctl were being silently forced to the default disabled state when a write to the sysctl contained GIDs that didn't map to the associated user namespace. Confusingly, the sysctl's write operation would return success and then a subsequent read of the sysctl would indicate that the low and high values are the overflowgid. This patch changes the behavior by clearly returning an error when the sysctl write operation receives a GID range that doesn't map to the associated user namespace. In such a situation, the previous value of the sysctl is preserved and that range will be returned in a subsequent read of the sysctl. Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-06net: aquantia: vlan unicast address list correct handlingIgor Russkikh
Setting up macvlan/macvtap networks over atlantic NIC results in no traffic over these networks because ndo_set_rx_mode did not listed UC MACs as registered in unicast filter. Here we fix that taking into account maximum number of UC filters supported by hardware. If more than MAX addresses were registered, we just enable promisc and/or allmulti to pass the traffic in. We also remove MULTICAST_ADDRESS_MAX constant from aq_cfg since thats not a configurable parameter at all. Fixes: b21f502 ("net:ethernet:aquantia: Fix for multicast filter handling.") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-06MAINTAINERS: update my email addressStefan Schmidt
The mail server hosting the old address is going to fade out. Time to update to an address I control directly. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-06liquidio: make timeout HZ independent and readableNicholas Mc Guire
schedule_timeout_* takes a timeout in jiffies but the code currently is passing in a constant which makes this timeout HZ dependent. So define a constant with (hopefully) meaningful name and pass it through msecs_to_jiffies() to fix the HZ dependency. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> commit f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters") Acked-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05qmi_wwan: add support for Quectel EG91Matevz Vucnik
This adds the USB id of LTE modem Quectel EG91. It requires the same quirk as other Quectel modems to make it work. Signed-off-by: Matevz Vucnik <vucnikm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05Merge branch 'qrtr-Broadcasting-control-messages'David S. Miller
Arun Kumar Neelakantam says: ==================== net: qrtr: Broadcasting control messages Allow messages only from control port to broadcast to avoid unnecessary messages and reset the node to local router NODE ID in control messages otherwise remote routers consider the packets as invalid and Drops it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: qrtr: Reset the node and port ID of broadcast messagesArun Kumar Neelakantam
All the control messages broadcast to remote routers are using QRTR_NODE_BCAST instead of using local router NODE ID which cause the packets to be dropped on remote router due to invalid NODE ID. Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: qrtr: Broadcast messages only from control portArun Kumar Neelakantam
The broadcast node id should only be sent with the control port id. Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05ipv6: make ipv6_renew_options() interrupt/kernel safePaul Moore
At present the ipv6_renew_options_kern() function ends up calling into access_ok() which is problematic if done from inside an interrupt as access_ok() calls WARN_ON_IN_IRQ() on some (all?) architectures (x86-64 is affected). Example warning/backtrace is shown below: WARNING: CPU: 1 PID: 3144 at lib/usercopy.c:11 _copy_from_user+0x85/0x90 ... Call Trace: <IRQ> ipv6_renew_option+0xb2/0xf0 ipv6_renew_options+0x26a/0x340 ipv6_renew_options_kern+0x2c/0x40 calipso_req_setattr+0x72/0xe0 netlbl_req_setattr+0x126/0x1b0 selinux_netlbl_inet_conn_request+0x80/0x100 selinux_inet_conn_request+0x6d/0xb0 security_inet_conn_request+0x32/0x50 tcp_conn_request+0x35f/0xe00 ? __lock_acquire+0x250/0x16c0 ? selinux_socket_sock_rcv_skb+0x1ae/0x210 ? tcp_rcv_state_process+0x289/0x106b tcp_rcv_state_process+0x289/0x106b ? tcp_v6_do_rcv+0x1a7/0x3c0 tcp_v6_do_rcv+0x1a7/0x3c0 tcp_v6_rcv+0xc82/0xcf0 ip6_input_finish+0x10d/0x690 ip6_input+0x45/0x1e0 ? ip6_rcv_finish+0x1d0/0x1d0 ipv6_rcv+0x32b/0x880 ? ip6_make_skb+0x1e0/0x1e0 __netif_receive_skb_core+0x6f2/0xdf0 ? process_backlog+0x85/0x250 ? process_backlog+0x85/0x250 ? process_backlog+0xec/0x250 process_backlog+0xec/0x250 net_rx_action+0x153/0x480 __do_softirq+0xd9/0x4f7 do_softirq_own_stack+0x2a/0x40 </IRQ> ... While not present in the backtrace, ipv6_renew_option() ends up calling access_ok() via the following chain: access_ok() _copy_from_user() copy_from_user() ipv6_renew_option() The fix presented in this patch is to perform the userspace copy earlier in the call chain such that it is only called when the option data is actually coming from userspace; that place is do_ipv6_setsockopt(). Not only does this solve the problem seen in the backtrace above, it also allows us to simplify the code quite a bit by removing ipv6_renew_options_kern() completely. We also take this opportunity to cleanup ipv6_renew_options()/ipv6_renew_option() a small amount as well. This patch is heavily based on a rough patch by Al Viro. I've taken his original patch, converted a kmemdup() call in do_ipv6_setsockopt() to a memdup_user() call, made better use of the e_inval jump target in the same function, and cleaned up the use ipv6_renew_option() by ipv6_renew_options(). CC: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05qed: off by one in qed_parse_mcp_trace_buf()Dan Carpenter
If format_idx == s_mcp_trace_meta.formats_num then we read one element beyond the end of the s_mcp_trace_meta.formats[] array. Fixes: 50bc60cb155c ("qed*: Utilize FW 8.33.11.0") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05netfilter: x_tables: set module owner for icmp(6) matchesFlorian Westphal
nft_compat relies on xt_request_find_match to increment refcount of the module that provides the match/target. The (builtin) icmp matches did't set the module owner so it was possible to rmmod ip(6)tables while icmp extensions were still in use. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-05ieee802154: 6lowpan: set IFLA_LINKLubomir Rintel
Otherwise NetworkManager (and iproute alike) is not able to identify the parent IEEE 802.15.4 interface of a 6LoWPAN link. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-07-05ieee802154: mcr20a: add missing includesArnd Bergmann
Without CONFIG_GPIOLIB, some headers are not included implicitly, leading to a build failure: drivers/net/ieee802154/mcr20a.c: In function 'mcr20a_probe': drivers/net/ieee802154/mcr20a.c:1347:13: error: implicit declaration of function 'irq_get_trigger_type'; did you mean 'irq_get_irqchip_state'? [-Werror=implicit-function-declaration] This includes gpio/consumer.h and irq.h directly rather through the gpiolib header. Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Xue Liu <liuxuenetmail@gmail.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-07-05samples/bpf: add .gitignore fileTaeung Song
For untracked executables of samples/bpf, add this. Untracked files: (use "git add <file>..." to include in what will be committed) samples/bpf/cpustat samples/bpf/fds_example samples/bpf/lathist samples/bpf/load_sock_ops ... Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05samples/bpf: Check the error of write() and read()Taeung Song
test_task_rename() and test_urandom_read() can be failed during write() and read(), So check the result of them. Reviewed-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05samples/bpf: Check the result of system()Taeung Song
To avoid the below build warning message, use new generate_load() checking the return value. ignoring return value of ‘system’, declared with attribute warn_unused_result And it also refactors the duplicate code of both test_perf_event_all_cpu() and test_perf_event_task() Cc: Teng Qin <qinteng@fb.com> Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05samples/bpf: add missing <linux/if_vlan.h>Taeung Song
This fixes build error regarding redefinition: CLANG-bpf samples/bpf/parse_varlen.o samples/bpf/parse_varlen.c:111:8: error: redefinition of 'vlan_hdr' struct vlan_hdr { ^ ./include/linux/if_vlan.h:38:8: note: previous definition is here So remove duplicate 'struct vlan_hdr' in sample code and include if_vlan.h Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05qed: Fix reading stale configuration informationDenis Bolotin
Configuration information read at driver load can become stale after it is updated. Mark information as not valid and re-populate when this happens. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: phy: fix flag masking in __set_phy_supportedHeiner Kallweit
Currently also the pause flags are removed from phydev->supported because they're not included in PHY_DEFAULT_FEATURES. I don't think this is intended, especially when considering that this function can be called via phy_set_max_speed() anywhere in a driver. Change the masking to mask out only the values we're going to change. In addition remove the misleading comment, job of this small function is just to adjust the supported and advertised speeds. Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04smsc75xx: Add workaround for gigabit link up hardware errata.Yuiko Oshino
In certain conditions, the device may not be able to link in gigabit mode. This software workaround ensures that the device will not enter the failure state. Fixes: d0cad871703b898a442e4049c532ec39168e5b57 ("SMSC75XX USB 2.0 Gigabit Ethernet Devices") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04sctp: fix the issue that pathmtu may be set lower than MINSEGMENTXin Long
After commit b6c5734db070 ("sctp: fix the handling of ICMP Frag Needed for too small MTUs"), sctp_transport_update_pmtu would refetch pathmtu from the dst and set it to transport's pathmtu without any check. The new pathmtu may be lower than MINSEGMENT if the dst is obsolete and updated by .get_dst() in sctp_transport_update_pmtu. In this case, it could have a smaller MTU as well, and thus we should validate it against MINSEGMENT instead. Syzbot reported a warning in sctp_mtu_payload caused by this. This patch refetches the pathmtu by calling sctp_dst_mtu where it does the check against MINSEGMENT. v1->v2: - refetch the pathmtu by calling sctp_dst_mtu instead as Marcelo's suggestion. Fixes: b6c5734db070 ("sctp: fix the handling of ICMP Frag Needed for too small MTUs") Reported-by: syzbot+f0d9d7cba052f9344b03@syzkaller.appspotmail.com Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04net/ipv6: Revert attempt to simplify route replace and appendDavid Ahern
NetworkManager likes to manage linklocal prefix routes and does so with the NLM_F_APPEND flag, breaking attempts to simplify the IPv6 route code and by extension enable multipath routes with device only nexthops. Revert f34436a43092 and these followup patches: 6eba08c3626b ("ipv6: Only emit append events for appended routes"). ce45bded6435 ("mlxsw: spectrum_router: Align with new route replace logic") 53b562df8c20 ("mlxsw: spectrum_router: Allow appending to dev-only routes") Update the fib_tests cases to reflect the old behavior. Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route") Signed-off-by: David Ahern <dsahern@gmail.com>
2018-07-04gen_stats: Fix netlink stats dumping in the presence of paddingToke Høiland-Jørgensen
The gen_stats facility will add a header for the toplevel nlattr of type TCA_STATS2 that contains all stats added by qdisc callbacks. A reference to this header is stored in the gnet_dump struct, and when all the per-qdisc callbacks have finished adding their stats, the length of the containing header will be adjusted to the right value. However, on architectures that need padding (i.e., that don't set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), the padding nlattr is added before the stats, which means that the stored pointer will point to the padding, and so when the header is fixed up, the result is just a very big padding nlattr. Because most qdiscs also supply the legacy TCA_STATS struct, this problem has been mostly invisible, but we exposed it with the netlink attribute-based statistics in CAKE. Fix the issue by fixing up the stored pointer if it points to a padding nlattr. Tested-by: Pete Heist <pete@heistp.net> Tested-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04net: phy: marvell: change default m88e1510 LED configurationWang Dongsheng
The m88e1121 LED default configuration does not apply m88e151x. So add a function to relpace m88e1121 LED configuration. Signed-off-by: Wang Dongsheng <dongsheng.wang@hxt-semitech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03bpf: hash map: decrement counter on errorMauricio Vasquez B
Decrement the number of elements in the map in case the allocation of a new node fails. Fixes: 6c9059817432 ("bpf: pre-allocate hash map elements") Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-03Merge tag 'wireless-drivers-for-davem-2018-07-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.18 First set of fixes for 4.18 and for numerous drivers. Something to mention about is the wcn36xx fix which makes it possible to compile with gcc older than 4.4 (though I'm not sure if we even support those anymore). qtnfmac * coverity fix for a new commit in v4.18-rc1 rtlwifi * fix kernel oops during driver removal * fix firmware image corruption for rtl8821ae brcmfmac * fix crash if there's no firmware image mwifiex * a revert and a better fix for a new commit v4.18-rc1 mt7601u * fix a recent regression about unnecessary warning about avg_rssi wcn36xx * convert testmode.c to plain ASCII ath10k * fix a firmware crash during bandwidth change ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03r8169: fix mac address changeHeiner Kallweit
Network core refuses to change mac address because flag IFF_LIVE_ADDR_CHANGE isn't set. Set this missing flag. Fixes: 1f7aa2bc268e ("r8169: simplify rtl_set_mac_address") Reported-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03tls: fix skb_to_sgvec returning unhandled error.Doron Roberts-Kedes
The current code does not inspect the return value of skb_to_sgvec. This can cause a nullptr kernel panic when the malformed sgvec is passed into the crypto request. Checking the return value of skb_to_sgvec and skipping decryption if it is negative fixes this problem. Fixes: c46234ebb4d1 ("tls: RX path for ktls") Acked-by: Dave Watson <davejwatson@fb.com> Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03lib: rhashtable: Correct self-assignment in rhashtable.cRishabh Bhatnagar
In file lib/rhashtable.c line 777, skip variable is assigned to itself. The following error was observed: lib/rhashtable.c:777:41: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] error, forbidden warning: rhashtable.c:777 This error was found when compiling with Clang 6.0. Change it to iter->skip. Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02Merge branch 'af_xdp-fixes'Alexei Starovoitov
Magnus Karlsson says: ==================== This patch set fixes three bugs in the SKB TX path of AF_XDP. Details in the individual commits. The structure of the patch set is as follows: Patch 1: Fix for lost completion message Patch 2-3: Fix for possible multiple completions of single packet Patch 4: Fix potential race during error Changes from v1: * Added explanation of race in commit message of patch 4. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-02xsk: fix potential race in SKB TX completion codeMagnus Karlsson
There is a potential race in the TX completion code for the SKB case. One process enters the sendmsg code of an AF_XDP socket in order to send a frame. The execution eventually trickles down to the driver that is told to send the packet. However, it decides to drop the packet due to some error condition (e.g., rings full) and frees the SKB. This will trigger the SKB destructor and a completion will be sent to the AF_XDP user space through its single-producer/single-consumer queues. At the same time a TX interrupt has fired on another core and it dispatches the TX completion code in the driver. It does its HW specific things and ends up freeing the SKB associated with the transmitted packet. This will trigger the SKB destructor and a completion will be sent to the AF_XDP user space through its single-producer/single-consumer queues. With a pseudo call stack, it would look like this: Core 1: sendmsg() being called in the application netdev_start_xmit() Driver entered through ndo_start_xmit Driver decides to free the SKB for some reason (e.g., rings full) Destructor of SKB called xskq_produce_addr() is called to signal completion to user space Core 2: TX completion irq NAPI loop Driver irq handler for TX completions Frees the SKB Destructor of SKB called xskq_produce_addr() is called to signal completion to user space We now have a violation of the single-producer/single-consumer principle for our queues as there are two threads trying to produce at the same time on the same queue. Fixed by introducing a spin_lock in the destructor. In regards to the performance, I get around 1.74 Mpps for txonly before and after the introduction of the spinlock. There is of course some impact due to the spin lock but it is in the less significant digits that are too noisy for me to measure. But let us say that the version without the spin lock got 1.745 Mpps in the best case and the version with 1.735 Mpps in the worst case, then that would mean a maximum drop in performance of 0.5%. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-02samples/bpf: deal with EBUSY return code from sendmsg in xdpsock sampleMagnus Karlsson
Sendmsg in the SKB path of AF_XDP can now return EBUSY when a packet was discarded and completed by the driver. Just ignore this message in the sample application. Fixes: b4b8faa1ded7 ("samples/bpf: sample application and documentation for AF_XDP sockets") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Reported-by: Pavel Odintsov <pavel@fastnetmon.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-02xsk: frame could be completed more than once in SKB pathMagnus Karlsson
Fixed a bug in which a frame could be completed more than once when an error was returned from dev_direct_xmit(). The code erroneously retried sending the message leading to multiple calls to the SKB destructor and therefore multiple completions of the same buffer to user space. The error code in this case has been changed from EAGAIN to EBUSY in order to tell user space that the sending of the packet failed and the buffer has been return to user space through the completion queue. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Reported-by: Pavel Odintsov <pavel@fastnetmon.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-02xsk: fix potential lost completion message in SKB pathMagnus Karlsson
The code in xskq_produce_addr erroneously checked if there was up to LAZY_UPDATE_THRESHOLD amount of space in the completion queue. It only needs to check if there is one slot left in the queue. This bug could under some circumstances lead to a WARN_ON_ONCE being triggered and the completion message to user space being lost. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Reported-by: Pavel Odintsov <pavel@fastnetmon.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-02Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds
Pull MD fixes from Shaohua Li: "Two small fixes for MD: - an error handling fix from me - a recover bug fix for raid10 from BingJing" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/raid10: fix that replacement cannot complete recovery after reassemble MD: cleanup resources in failure
2018-07-02Merge tag 'for-linus' of git://github.com/stffrdhrn/linuxLinus Torvalds
Pull OpenRISC fixes from Stafford Horne: "Two fixes for issues which were breaking OpenRISC boot: - Fix bug in __pte_free_tlb() exposed in 4.18 by Matthew Wilcox's page table flag addition. - Fix issue booting on real hardware if delay slot detection emulation is disabled" * tag 'for-linus' of git://github.com/stffrdhrn/linux: openrisc: entry: Fix delay slot exception detection openrisc: Call destructor during __pte_free_tlb
2018-07-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Verify netlink attributes properly in nf_queue, from Eric Dumazet. 2) Need to bump memory lock rlimit for test_sockmap bpf test, from Yonghong Song. 3) Fix VLAN handling in lan78xx driver, from Dave Stevenson. 4) Fix uninitialized read in nf_log, from Jann Horn. 5) Fix raw command length parsing in mlx5, from Alex Vesker. 6) Cleanup loopback RDS connections upon netns deletion, from Sowmini Varadhan. 7) Fix regressions in FIB rule matching during create, from Jason A. Donenfeld and Roopa Prabhu. 8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren. 9) More bpfilter build fixes/adjustments from Masahiro Yamada. 10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper Dangaard Brouer. 11) fib_tests.sh file permissions were broken, from Shuah Khan. 12) Make sure BH/preemption is disabled in data path of mac80211, from Denis Kenzior. 13) Don't ignore nla_parse_nested() return values in nl80211, from Johannes berg. 14) Properly account sock objects ot kmemcg, from Shakeel Butt. 15) Adjustments to setting bpf program permissions to read-only, from Daniel Borkmann. 16) TCP Fast Open key endianness was broken, it always took on the host endiannness. Whoops. Explicitly make it little endian. From Yuching Cheng. 17) Fix prefix route setting for link local addresses in ipv6, from David Ahern. 18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva. 19) Various bpf sockmap fixes, from John Fastabend. 20) Use after free for GRO with ESP, from Sabrina Dubroca. 21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from Eric Biggers. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) qede: Adverstise software timestamp caps when PHC is not available. qed: Fix use of incorrect size in memcpy call. qed: Fix setting of incorrect eswitch mode. qed: Limit msix vectors in kdump kernel to the minimum required count. ipvlan: call dev_change_flags when ipvlan mode is reset ipv6: sr: fix passing wrong flags to crypto_alloc_shash() net: fix use-after-free in GRO with ESP tcp: prevent bogus FRTO undos with non-SACK flows bpf: sockhash, add release routine bpf: sockhash fix omitted bucket lock in sock_close bpf: sockmap, fix smap_list_map_remove when psock is in many maps bpf: sockmap, fix crash when ipv6 sock is added net: fib_rules: bring back rule_exists to match rule during add hv_netvsc: split sub-channel setup into async and sync net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN atm: zatm: Fix potential Spectre v1 s390/qeth: consistently re-enable device features s390/qeth: don't clobber buffer on async TX completion s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6] s390/qeth: fix race when setting MAC address ...
2018-07-02Merge branch 'qed-fixes'David S. Miller
Sudarsana Reddy Kalluru says: ==================== qed*: Fix series. The patch series addresses few issues in the qed* drivers. Please consider applying it to 'net' branch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02qede: Adverstise software timestamp caps when PHC is not available.Sudarsana Reddy Kalluru
When ptp clock is not available for a PF (e.g., higher PFs in NPAR mode), get-tsinfo() callback should return the software timestamp capabilities instead of returning the error. Fixes: 4c55215c ("qede: Add driver support for PTP") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02qed: Fix use of incorrect size in memcpy call.Sudarsana Reddy Kalluru
Use the correct size value while copying chassis/port id values. Fixes: 6ad8c632e ("qed: Add support for query/config dcbx.") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02qed: Fix setting of incorrect eswitch mode.Sudarsana Reddy Kalluru
By default, driver sets the eswitch mode incorrectly as VEB (virtual Ethernet bridging). Need to set VEB eswitch mode only when sriov is enabled, and it should be to set NONE by default. The patch incorporates this change. Fixes: 0fefbfbaa ("qed*: Management firmware - notifications and defaults") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02qed: Limit msix vectors in kdump kernel to the minimum required count.Sudarsana Reddy Kalluru
Memory size is limited in the kdump kernel environment. Allocation of more msix-vectors (or queues) consumes few tens of MBs of memory, which might lead to the kdump kernel failure. This patch adds changes to limit the number of MSI-X vectors in kdump kernel to minimum required value (i.e., 2 per engine). Fixes: fe56b9e6a ("qed: Add module with basic common support") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02ipvlan: call dev_change_flags when ipvlan mode is resetHangbin Liu
After we change the ipvlan mode from l3 to l2, or vice versa, we only reset IFF_NOARP flag, but don't flush the ARP table cache, which will cause eth->h_dest to be equal to eth->h_source in ipvlan_xmit_mode_l2(). Then the message will not come out of host. Here is the reproducer on local host: ip link set eth1 up ip addr add 192.168.1.1/24 dev eth1 ip link add link eth1 ipvlan1 type ipvlan mode l3 ip netns add net1 ip link set ipvlan1 netns net1 ip netns exec net1 ip link set ipvlan1 up ip netns exec net1 ip addr add 192.168.2.1/24 dev ipvlan1 ip route add 192.168.2.0/24 via 192.168.1.2 ping 192.168.2.2 -c 2 ip netns exec net1 ip link set ipvlan1 type ipvlan mode l2 ping 192.168.2.2 -c 2 Add the same configuration on remote host. After we set the mode to l2, we could find that the src/dst MAC addresses are the same on eth1: 21:26:06.648565 00:b7:13:ad:d3:05 > 00:b7:13:ad:d3:05, ethertype IPv4 (0x0800), length 98: (tos 0x0, ttl 64, id 58356, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.2.1 > 192.168.2.2: ICMP echo request, id 22686, seq 1, length 64 Fix this by calling dev_change_flags(), which will call netdevice notifier with flag change info. v2: a) As pointed out by Wang Cong, check return value for dev_change_flags() when change dev flags. b) As suggested by Stefano and Sabrina, move flags setting before l3mdev_ops. So we don't need to redo ipvlan_{, un}register_nf_hook() again in err path. Reported-by: Jianlin Shi <jishi@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Fixes: 2ad7bf3638411 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02ipv6: sr: fix passing wrong flags to crypto_alloc_shash()Eric Biggers
The 'mask' argument to crypto_alloc_shash() uses the CRYPTO_ALG_* flags, not 'gfp_t'. So don't pass GFP_KERNEL to it. Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02net: fix use-after-free in GRO with ESPSabrina Dubroca
Since the addition of GRO for ESP, gro_receive can consume the skb and return -EINPROGRESS. In that case, the lower layer GRO handler cannot touch the skb anymore. Commit 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") converted some of the gro_receive handlers that can lead to ESP's gro_receive so that they wouldn't access the skb when -EINPROGRESS is returned, but missed other spots, mainly in tunneling protocols. This patch finishes the conversion to using skb_gro_flush_final(), and adds a new helper, skb_gro_flush_final_remcsum(), used in VXLAN and GUE. Fixes: 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-01Linux 4.18-rc3v4.18-rc3Linus Torvalds
2018-07-01Merge tag 'for-4.18-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "We have a few regression fixes for qgroup rescan status tracking and the vm_fault_t conversion that mixed up the error values" * tag 'for-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix mount failure when qgroup rescan is in progress Btrfs: fix regression in btrfs_page_mkwrite() from vm_fault_t conversion btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf
2018-07-01Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull vfs fix from Al Viro: "Followup to procfs-seq_file series this window" This fixes a memory leak by making sure that proc seq files release any private data on close. The 'proc_seq_open' has to be properly paired with 'proc_seq_release' that releases the extra private data. * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: proc: add proc_seq_release
generated by cgit (git 2.34.1) at 2025-09-11 16:14:20 +0000