| Age | Commit message (Collapse) | Author |
|---|
|
When doing "fast unprotection" of nested TDP page tables, skip emulation
if and only if at least one gfn was unprotected, i.e. continue with
emulation if simply resuming is likely to hit the same fault and risk
putting the vCPU into an infinite loop.
Note, it's entirely possible to get a false negative, e.g. if a different
vCPU faults on the same gfn and unprotects the gfn first, but that's a
relatively rare edge case, and emulating is still functionally ok, i.e.
saving a few cycles by avoiding emulation isn't worth the risk of putting
the vCPU into an infinite loop.
Opportunistically rewrite the relevant comment to document in gory detail
exactly what scenario the "fast unprotect" logic is handling.
Fixes: 147277540bbc ("kvm: svm: Add support for additional SVM NPF error codes")
Cc: Yuan Yao <yuan.yao@intel.com>
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Trigger KVM's various "unprotect gfn" paths if and only if the page fault
was a write to a write-protected gfn. To do so, add a new page fault
return code, RET_PF_WRITE_PROTECTED, to explicitly and precisely track
such page faults.
If a page fault requires emulation for any MMIO (or any reason besides
write-protection), trying to unprotect the gfn is pointless and risks
putting the vCPU into an infinite loop. E.g. KVM will put the vCPU into
an infinite loop if the vCPU manages to trigger MMIO on a page table walk.
Fixes: 147277540bbc ("kvm: svm: Add support for additional SVM NPF error codes")
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Link: https://lore.kernel.org/r/20240831001538.336683-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop the globally visible PFERR_NESTED_GUEST_PAGE and replace it with a
more appropriately named is_write_to_guest_page_table(). The macro name
is misleading, because while all nNPT walks match PAGE|WRITE|PRESENT, the
reverse is not true.
No functional change intended.
Link: https://lore.kernel.org/r/20240831001538.336683-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When reading or writing a guest page, WARN and bail if offset+len would
result in a read to a different page so that KVM bugs are more likely to
be detected, and so that any such bugs are less likely to escalate to an
out-of-bounds access. E.g. if userspace isn't using guard pages and the
target page is at the end of a memslot.
Note, KVM already hardens itself in similar APIs, e.g. in the "cached"
variants, it's just the vanilla APIs that are playing with fire.
Link: https://lore.kernel.org/r/20240829191413.900740-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Pass "seg" instead of "len" when writing guest memory in kvm_clear_guest(),
as "seg" holds the number of bytes to write for the current page, while
"len" holds the total bytes remaining.
Luckily, all users of kvm_clear_guest() are guaranteed to not cross a page
boundary, and so the bug is unhittable in the current code base.
Fixes: 2f5414423ef5 ("KVM: remove kvm_clear_guest_page")
Reported-by: zyr_ms@outlook.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219104
Link: https://lore.kernel.org/r/20240829191413.900740-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add lockdep assertions in get_vmcs12() and get_shadow_vmcs12() to verify
the vCPU's mutex is held, as the returned VMCS objects are dynamically
allocated/freed when nested VMX is turned on/off, i.e. accessing vmcs12
structures without holding vcpu->mutex is susceptible to use-after-free.
Waive the assertion if the VM is being destroyed, as KVM currently forces
a nested VM-Exit when freeing the vCPU. If/when that wart is fixed, the
assertion can/should be converted to an unqualified lockdep assertion.
See also https://lore.kernel.org/all/Zsd0TqCeY3B5Sb5b@google.com.
Link: https://lore.kernel.org/r/20240906043413.1049633-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Explicitly invalidate posted_intr_nv when emulating nested VM-Enter and
posted interrupts are disabled to make it clear that posted_intr_nv is
valid if and only if nested posted interrupts are enabled, and as a cheap
way to harden against KVM bugs.
KVM initializes posted_intr_nv to -1 at vCPU creation and resets it to -1
when unloading vmcs12 and/or leaving nested mode, i.e. this is not a bug
fix (or at least, it's not intended to be a bug fix).
Note, tracking nested.posted_intr_nv as a u16 subtly adds a measure of
safety, as it prevents unintentionally matching KVM's informal "no IRQ"
vector of -1, stored as a signed int. Because a u16 can be always be
represented as a signed int, the effective "invalid" value of
posted_intr_nv, 65535, will be preserved as-is when comparing against an
int, i.e. will be zero-extended, not sign-extended, and thus won't get a
false positive if KVM is buggy and compares posted_intr_nv against -1.
Opportunistically add a comment in vmx_deliver_nested_posted_interrupt()
to call out that it must check vmx->nested.posted_intr_nv, not the vector
in vmcs12, which is presumably the _entire_ reason nested.posted_intr_nv
exists. E.g. vmcs12 is a KVM-controlled snapshot, so there are no TOCTOU
races to worry about, the only potential badness is if the vCPU leaves
nested and frees vmcs12 between the sender checking is_guest_mode() and
dereferencing the vmcs12 pointer.
Link: https://lore.kernel.org/r/20240906043413.1049633-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Fold kvm_get_apic_interrupt() into kvm_cpu_get_interrupt() now that nVMX
essentially open codes kvm_get_apic_interrupt() in order to correctly
emulate nested posted interrupts.
Opportunistically stop exporting kvm_cpu_get_interrupt(), as the
aforementioned nVMX flow was the only user in vendor code.
Link: https://lore.kernel.org/r/20240906043413.1049633-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When synthensizing a nested VM-Exit due to an external interrupt, pend a
nested posted interrupt if the external interrupt vector matches L2's PI
notification vector, i.e. if the interrupt is a PI notification for L2.
This fixes a bug where KVM will incorrectly inject VM-Exit instead of
processing nested posted interrupt when IPI virtualization is enabled.
Per the SDM, detection of the notification vector doesn't occur until the
interrupt is acknowledge and deliver to the CPU core.
If the external-interrupt exiting VM-execution control is 1, any unmasked
external interrupt causes a VM exit (see Section 26.2). If the "process
posted interrupts" VM-execution control is also 1, this behavior is
changed and the processor handles an external interrupt as follows:
1. The local APIC is acknowledged; this provides the processor core
with an interrupt vector, called here the physical vector.
2. If the physical vector equals the posted-interrupt notification
vector, the logical processor continues to the next step. Otherwise,
a VM exit occurs as it would normally due to an external interrupt;
the vector is saved in the VM-exit interruption-information field.
For the most part, KVM has avoided problems because a PI NV for L2 that
arrives will L2 is active will be processed by hardware, and KVM checks
for a pending notification vector during nested VM-Enter. Thus, to hit
the bug, the PI NV interrupt needs to sneak its way into L1's vIRR while
L2 is active.
Without IPI virtualization, the scenario is practically impossible to hit,
modulo L1 doing weird things (see below), as the ordering between
vmx_deliver_posted_interrupt() and nested VM-Enter effectively guarantees
that either the sender will see the vCPU as being in_guest_mode(), or the
receiver will see the interrupt in its vIRR.
With IPI virtualization, introduced by commit d588bb9be1da ("KVM: VMX:
enable IPI virtualization"), the sending CPU effectively implements a rough
equivalent of vmx_deliver_posted_interrupt(), sans the nested PI NV check.
If the target vCPU has a valid PID, the CPU will send a PI NV interrupt
based on _L1's_ PID, as the sender's because IPIv table points at L1 PIDs.
PIR := 32 bytes at PID_ADDR;
// under lock
PIR[V] := 1;
store PIR at PID_ADDR;
// release lock
NotifyInfo := 8 bytes at PID_ADDR + 32;
// under lock
IF NotifyInfo.ON = 0 AND NotifyInfo.SN = 0; THEN
NotifyInfo.ON := 1;
SendNotify := 1;
ELSE
SendNotify := 0;
FI;
store NotifyInfo at PID_ADDR + 32;
// release lock
IF SendNotify = 1; THEN
send an IPI specified by NotifyInfo.NDST and NotifyInfo.NV;
FI;
As a result, the target vCPU ends up receiving an interrupt on KVM's
POSTED_INTR_VECTOR while L2 is running, with an interrupt in L1's PIR for
L2's nested PI NV. The POSTED_INTR_VECTOR interrupt triggers a VM-Exit
from L2 to L0, KVM moves the interrupt from L1's PIR to vIRR, triggers a
KVM_REQ_EVENT prior to re-entry to L2, and calls vmx_check_nested_events(),
effectively bypassing all of KVM's "early" checks on nested PI NV.
Without IPI virtualization, the bug can likely be hit only if L1 programs
an assigned device to _post_ an interrupt to L2's notification vector, by
way of L1's PID.PIR. Doing so would allow the interrupt to get into L1's
vIRR without KVM checking vmcs12's NV. Which is architecturally allowed,
but unlikely behavior for a hypervisor.
Cc: Zeng Guang <guang.zeng@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20240906043413.1049633-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
In the should-be-impossible scenario that kvm_cpu_get_interrupt() doesn't
return a valid vector after checking kvm_cpu_has_interrupt(), skip VM-Exit
injection to reduce the probability of crashing/confusing L1. Now that
KVM gets the IRQ _before_ calling nested_vmx_vmexit(), squashing the
VM-Exit injection is trivial since there are no actions that need to be
undone.
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20240906043413.1049633-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the logic to get the to-be-acknowledge IRQ for a nested VM-Exit from
nested_vmx_vmexit() to vmx_check_nested_events(), which is subtly the one
and only path where KVM invokes nested_vmx_vmexit() with
EXIT_REASON_EXTERNAL_INTERRUPT. A future fix will perform a last-minute
check on L2's nested posted interrupt notification vector, just before
injecting a nested VM-Exit. To handle that scenario correctly, KVM needs
to get the interrupt _before_ injecting VM-Exit, as simply querying the
highest priority interrupt, via kvm_cpu_has_interrupt(), would result in
TOCTOU bug, as a new, higher priority interrupt could arrive between
kvm_cpu_has_interrupt() and kvm_cpu_get_interrupt().
Unfortunately, simply moving the call to kvm_cpu_get_interrupt() doesn't
suffice, as a VMWRITE to GUEST_INTERRUPT_STATUS.SVI is hiding in
kvm_get_apic_interrupt(), and acknowledging the interrupt before nested
VM-Exit would cause the VMWRITE to hit vmcs02 instead of vmcs01.
Open code a rough equivalent to kvm_cpu_get_interrupt() so that the IRQ
is acknowledged after emulating VM-Exit, taking care to avoid the TOCTOU
issue described above.
Opportunistically convert the WARN_ON() to a WARN_ON_ONCE(). If KVM has
a bug that results in a false positive from kvm_cpu_has_interrupt(),
spamming dmesg won't help the situation.
Note, nested_vmx_reflect_vmexit() can never reflect external interrupts as
they are always "wanted" by L0.
Link: https://lore.kernel.org/r/20240906043413.1049633-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Split the "ack" phase, i.e. the movement of an interrupt from IRR=>ISR,
out of kvm_get_apic_interrupt() and into a separate API so that nested
VMX can acknowledge a specific interrupt _after_ emulating a VM-Exit from
L2 to L1.
To correctly emulate nested posted interrupts while APICv is active, KVM
must:
1. find the highest pending interrupt.
2. check if that IRQ is L2's notification vector
3. emulate VM-Exit if the IRQ is NOT the notification vector
4. ACK the IRQ in L1 _after_ VM-Exit
When APICv is active, the process of moving the IRQ from the IRR to the
ISR also requires a VMWRITE to update vmcs01.GUEST_INTERRUPT_STATUS.SVI,
and so acknowledging the interrupt before switching to vmcs01 would result
in marking the IRQ as in-service in the wrong VMCS.
KVM currently fudges around this issue by doing kvm_get_apic_interrupt()
smack dab in the middle of emulating VM-Exit, but that hack doesn't play
nice with nested posted interrupts, as notification vector IRQs don't
trigger a VM-Exit in the first place.
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240906043413.1049633-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When SGX EDECCSSA support was added to KVM in commit 16a7fe3728a8
("KVM/VMX: Allow exposing EDECCSSA user leaf function to KVM guest"), it
forgot to clear the X86_FEATURE_SGX_EDECCSSA bit in KVM CPU caps when
KVM SGX is disabled. Fix it.
Fixes: 16a7fe3728a8 ("KVM/VMX: Allow exposing EDECCSSA user leaf function to KVM guest")
Signed-off-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240905120837.579102-1-kai.huang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Commit 238adc77051a ("KVM: Cleanup LAPIC interface") removed
kvm_lapic_get_base() but leave declaration.
And other two declarations were never implenmented since introduction.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20240830022537.2403873-1-yuehaibing@huawei.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
In x86's debug_regs test, change the RDMSR(MISC_ENABLES) in the single-step
testcase to a WRMSR(TSC_DEADLINE) in order to verify that KVM honors
KVM_GUESTDBG_SINGLESTEP when handling a fastpath VM-Exit.
Note, the extra coverage is effectively Intel-only, as KVM only handles
TSC_DEADLINE in the fastpath when the timer is emulated via the hypervisor
timer, a.k.a. the VMX preemption timer.
Link: https://lore.kernel.org/r/20240830044448.130449-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Leave nested mode before synthesizing shutdown (a.k.a. TRIPLE_FAULT) if
RSM fails when resuming L2 (a.k.a. guest mode). Architecturally, shutdown
on RSM occurs _before_ the transition back to guest mode on both Intel and
AMD.
On Intel, per the SDM pseudocode, SMRAM state is loaded before critical
VMX state:
restore state normally from SMRAM;
...
CR4.VMXE := value stored internally;
IF internal storage indicates that the logical processor had been in
VMX operation (root or non-root)
THEN
enter VMX operation (root or non-root);
restore VMX-critical state as defined in Section 32.14.1;
...
restore current VMCS pointer;
FI;
AMD's APM is both less clearcut and more explicit. Because AMD CPUs save
VMCB and guest state in SMRAM itself, given the lack of anything in the
APM to indicate a shutdown in guest mode is possible, a straightforward
reading of the clause on invalid state is that _what_ state is invalid is
irrelevant, i.e. all roads lead to shutdown.
An RSM causes a processor shutdown if an invalid-state condition is
found in the SMRAM state-save area.
This fixes a bug found by syzkaller where synthesizing shutdown for L2
led to a nested VM-Exit (if L1 is intercepting shutdown), which in turn
caused KVM to complain about trying to cancel a nested VM-Enter (see
commit 759cbd59674a ("KVM: x86: nSVM/nVMX: set nested_run_pending on VM
entry which is a result of RSM").
Note, Paolo pointed out that KVM shouldn't set nested_run_pending until
after loading SMRAM state. But as above, that's only half the story, KVM
shouldn't transition to guest mode either. Unfortunately, fixing that
mess requires rewriting the nVMX and nSVM RSM flows to not piggyback
their nested VM-Enter flows, as executing the nested VM-Enter flows after
loading state from SMRAM would clobber much of said state.
For now, add a FIXME to call out that transitioning to guest mode before
loading state from SMRAM is wrong.
Link: https://lore.kernel.org/all/CABgObfYaUHXyRmsmg8UjRomnpQ0Jnaog9-L2gMjsjkqChjDYUQ@mail.gmail.com
Reported-by: syzbot+988d9efcdf137bc05f66@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/0000000000007a9acb06151e1670@google.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Closes: https://lore.kernel.org/all/CAMhUBjmXMYsEoVYw_M8hSZjBMHh24i88QYm-RY6HDta5YZ7Wgw@mail.gmail.com
Analyzed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Cc: Kishen Maloor <kishen.maloor@intel.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20240906161337.1118412-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Brett Creeley says:
====================
ionic: convert Rx queue buffers to use page_pool
Our home-grown buffer management needs to go away and we need to play
nicely with the page_pool infrastructure. This patchset cleans up some
of our API use and converts the Rx traffic queues to use page_pool.
The first few patches are for tidying up things, then a small XDP
configuration refactor, adding page_pool support, and finally adding
support to hot swap an XDP program without having to reconfigure
anything.
The result is code that more closely follows current patterns, as well as
a either a performance boost or equivalent performance as seen with
iperf testing:
mss netio tx_pps rx_pps total_pps tx_bw rx_bw total_bw
---- ------- ---------- ---------- ----------- ------- ------- ----------
Before:
256 bidir 13,839,293 15,515,227 29,354,520 34 38 71
512 bidir 13,913,249 14,671,693 28,584,942 62 65 127
1024 bidir 13,006,189 13,695,413 26,701,602 109 115 224
1448 bidir 12,489,905 12,791,734 25,281,639 145 149 294
2048 bidir 9,195,622 9,247,649 18,443,271 148 149 297
4096 bidir 5,149,716 5,247,917 10,397,633 160 163 323
8192 bidir 3,029,993 3,008,882 6,038,875 179 179 358
9000 bidir 2,789,358 2,800,744 5,590,102 181 180 361
After:
256 bidir 21,540,037 21,344,644 42,884,681 52 52 104
512 bidir 23,170,014 19,207,260 42,377,274 103 85 188
1024 bidir 17,934,280 17,819,247 35,753,527 150 149 299
1448 bidir 15,242,515 14,907,030 30,149,545 167 174 341
2048 bidir 10,692,542 10,663,023 21,355,565 177 176 353
4096 bidir 6,024,977 6,083,580 12,108,557 187 180 367
8192 bidir 3,090,449 3,048,266 6,138,715 180 176 356
9000 bidir 2,859,146 2,864,226 5,723,372 178 180 358
v2: https://lore.kernel.org/20240826184422.21895-1-brett.creeley@amd.com
v1: https://lore.kernel.org/20240625165658.34598-1-shannon.nelson@amd.com
====================
Link: https://patch.msgid.link/20240906232623.39651-1-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using examples of other driver(s), add the ability to hot-swap an XDP
program without having to reconfigure the queues. To prevent the
q->xdp_prog to be read/written more than once use READ_ONCE() and
WRITE_ONCE() on the q->xdp_prog.
The q->xdp_prog was being checked in multiple different for loops in the
hot path. The change to allow xdp_prog hot swapping created the
possibility for many READ_ONCE(q->xdp_prog) calls during a single napi
callback. Refactor the Rx napi handling to allow a previous
READ_ONCE(q->xdp_prog) (or NULL for hwstamp_rxq) to be passed into the
relevant functions.
Also, move other Rx related hotpath handling into the newly created
ionic_rx_cq_service() function to reduce the scope of the xdp_prog
local variable and put all Rx handling in one function similar to Tx.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20240906232623.39651-8-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Our home-grown buffer management needs to go away and we need
to be playing nicely with the page_pool infrastructure. This
converts the Rx traffic queues to use page_pool.
Also, since ionic_rx_buf_size() was removed, redefine
IONIC_PAGE_SIZE to account for IONIC_MAX_BUF_LEN being the
largest allowed buffer to prevent overflowing u16 variables,
which could happen when PAGE_SIZE is defined as >= 64KB.
include/linux/minmax.h:93:37: warning: conversion from 'long unsigned int' to 'u16' {aka 'short unsigned int'} changes value from '65536' to '0' [-Woverflow]
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20240906232623.39651-7-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently when going to/from a NULL XDP program the driver uses
ionic_stop_queues_reconfig() and then ionic_start_queues_reconfig() in
order to re-register the xdp_rxq_info and re-init the queues. This is
fine until page_pool(s) are used in an upcoming patch.
In preparation for adding page_pool support make sure to completely
rebuild the queues when going to/from a NULL XDP program. Without this
change the call to mem_allocator_disconnect() never happens when going
to a NULL XDP program, which eventually results in
xdp_rxq_info_reg_mem_model() failing with -ENOSPC due to the mem_id_pool
ida having no remaining space.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20240906232623.39651-6-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of setting up and tearing down the rxq_info only when the XDP
program is loaded or unloaded, we will build the rxq_info whether or not
XDP is in use. This is the more common use pattern and better supports
future conversion to page_pool. Since the rxq_info wants the napi_id
we re-order things slightly to tie this into the queue init and deinit
functions where we do the add and delete of napi.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20240906232623.39651-5-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We originally were using a per-interface xdp_prog variable to track
a loaded XDP program since we knew there would never be support for a
per-queue XDP program. With that, we only built the per queue rxq_info
struct when an XDP program was loaded and removed it on XDP program unload,
and used the pointer as an indicator in the Rx hotpath to know to how build
the buffers. However, that's really not the model generally used, and
makes a conversion to page_pool Rx buffer cacheing a little problematic.
This patch converts the driver to use the more common approach of using
a per-queue xdp_prog pointer to work out buffer allocations and need
for bpf_prog_run_xdp(). We jostle a couple of fields in the queue struct
in order to keep the new xdp_prog pointer in a warm cacheline.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20240906232623.39651-4-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We aren't "putting" buf, we're just unlinking them from our tracking in
order to let the XDP_TX and XDP_REDIRECT tx clean paths take care of the
pages when they are done with them. This rename clears up the intent.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20240906232623.39651-3-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Here's a little debugging aid in case the device starts throwing
Tx completion errors.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20240906232623.39651-2-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all pwm drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240909130902.851274-2-u.kleine-koenig@baylibre.com
|
|
VFIO_EEH_PE_INJECT_ERR ioctl is currently failing on pseries
due to missing implementation of err_inject eeh_ops for pseries.
This patch implements pseries_eeh_err_inject in eeh_ops/pseries
eeh_ops. Implements support for injecting MMIO load/store error
for testing from user space.
The check on PCI error type (bus type) code is moved to platform
code, since the eeh_pe_inject_err can be allowed to more error
types depending on platform requirement. Removal of the check for
'type' in eeh_pe_inject_err() doesn't impact PowerNV as
pnv_eeh_err_inject() already has an equivalent check in place.
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240909140220.529333-1-nnmlinux@linux.ibm.com
|
|
Sort enum pcie_soc_base values.
Rename pcie_offsets_bmips_7425[] to pcie_offsets_bcm7425[] to match BCM7425
pcie_soc_base enum, bcm7425_cfg, and "brcm,bcm7425-pcie" .compatible
string.
Rename pcie_offset_bcm7278[] to pcie_offsets_bcm7278[] to match other
"pcie_offsets" names.
Rename pcie_offset_bcm7712[] to pcie_offsets_bcm7712[] to match other
"pcie_offsets" names.
Sort pcie_offsets_*[] by SoC name, move them all together, indent values
for easy reading.
Sort pcie_cfg_data structs by SoC name.
Sort .compatible strings by SoC name.
No functional change intended.
Link: https://lore.kernel.org/r/20240902205456.227409-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Gal Pressman says:
====================
RX software timestamp for all - round 3
Rounds 1 & 2 of drivers conversion were merged [1][2], this round will
complete the work.
[1] https://lore.kernel.org/netdev/20240901112803.212753-1-gal@nvidia.com/
[2] https://lore.kernel.org/netdev/20240904074922.256275-1-gal@nvidia.com/
====================
Link: https://patch.msgid.link/20240906144632.404651-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20240906144632.404651-17-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20240906144632.404651-16-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20240906144632.404651-15-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://patch.msgid.link/20240906144632.404651-14-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://patch.msgid.link/20240906144632.404651-13-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20240906144632.404651-12-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20240906144632.404651-11-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20240906144632.404651-10-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20240906144632.404651-9-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20240906144632.404651-8-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20240906144632.404651-7-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://patch.msgid.link/20240906144632.404651-6-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20240906144632.404651-5-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20240906144632.404651-4-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240906144632.404651-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240906144632.404651-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pa_stats is optional in dt bindings, make it optional in driver as well.
Currently if pa_stats syscon regmap is not found driver returns -ENODEV.
Fix this by not returning an error in case pa_stats is not found and
continue generating ethtool stats without pa_stats.
Fixes: 550ee90ac61c ("net: ti: icssg-prueth: Add support for PA Stats")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240906093649.870883-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev->emacp contains an __iomem pointer and values derived
from it are used as __iomem pointers. So use this annotation
in the return type for helpers that derive pointers from dev->emacp.
Flagged by Sparse as:
.../core.c:444:36: warning: incorrect type in argument 1 (different address spaces)
.../core.c:444:36: expected unsigned int volatile [noderef] [usertype] __iomem *addr
.../core.c:444:36: got unsigned int [usertype] *
.../core.c: note: in included file:
.../core.h:416:25: warning: cast removes address space '__iomem' of expression
Compile tested only.
No functional change intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240906-emac-iomem-v1-1-207cc4f3fed0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Willem de Bruijn says:
====================
selftests/net: add packetdrill
Lay the groundwork to import into kselftests the over 150 packetdrill
TCP/IP conformance tests on github.com/google/packetdrill.
1/2: add kselftest infra for TEST_PROGS that need an interpreter
2/2: add the specific packetdrill tests
====================
Link: https://patch.msgid.link/20240905231653.2427327-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lay the groundwork to import into kselftests the over 150 packetdrill
TCP/IP conformance tests on github.com/google/packetdrill.
Florian recently added support for packetdrill tests in nf_conntrack,
in commit a8a388c2aae49 ("selftests: netfilter: add packetdrill based
conntrack tests").
This patch takes a slightly different approach. It relies on
ksft_runner.sh to run every *.pkt file in the directory.
Any future imports of packetdrill tests should require no additional
coding. Just add the *.pkt files.
Initially import only two features/directories from github. One with a
single script, and one with two. This was the only reason to pick
tcp/inq and tcp/md5.
The path replaces the directory hierarchy in github with a flat space
of files: $(subst /,_,$(wildcard tcp/**/*.pkt)). This is the most
straightforward option to integrate with kselftests. The Linked thread
reviewed two ways to maintain the hierarchy: TEST_PROGS_RECURSE and
PRESERVE_TEST_DIRS. But both introduce significant changes to
kselftest infra and with that risk to existing tests.
Implementation notes:
- restore alphabetical order when adding the new directory to
tools/testing/selftests/Makefile
- imported *.pkt files and support verbatim from the github project,
except for
- update `source ./defaults.sh` path (to adjust for flat dir)
- add SPDX headers
- remove one author statement
- Acknowledgment: drop an e (checkpatch)
Tested:
make -C tools/testing/selftests \
TARGETS=net/packetdrill \
run_tests
make -C tools/testing/selftests \
TARGETS=net/packetdrill \
install INSTALL_PATH=$KSFT_INSTALL_PATH
# in virtme-ng
./run_kselftest.sh -c net/packetdrill
./run_kselftest.sh -t net/packetdrill:tcp_inq_client.pkt
Link: https://lore.kernel.org/netdev/20240827193417.2792223-1-willemdebruijn.kernel@gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240905231653.2427327-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support testcases that are themselves not executable, but need an
interpreter to run them.
If a test file is not executable, but an executable file
ksft_runner.sh exists in the TARGET dir, kselftest will run
./ksft_runner.sh ./$BASENAME_TEST
Packetdrill may add hundreds of packetdrill scripts for testing. These
scripts must be passed to the packetdrill process.
Have kselftest run each test directly, as it already solves common
runner requirements like parallel execution and isolation (netns).
A previous RFC added a wrapper in between, which would have to
reimplement such functionality.
Link: https://lore.kernel.org/netdev/66d4d97a4cac_3df182941a@willemb.c.googlers.com.notmuch/T/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240905231653.2427327-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The grc must be initialize first. There can be a condition where if
fou is NULL, goto out will be executed and grc would be used
uninitialized.
Fixes: 7e4196935069 ("fou: Fix null-ptr-deref in GRO.")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240906102839.202798-1-usama.anjum@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
