summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-10-18i915: Initialize hardware status page at device load when possible.Keith Packard
Some chips were unstable with repeated setup/teardown of the hardware status page. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: Track progress inside of batchbuffers for determining wedgedness.Keith Packard
This avoids early termination for long-running commands. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: Add support for MSI and interrupt mitigation.Eric Anholt
Previous attempts at interrupt mitigation had been foiled by i915_wait_irq's failure to update the sarea seqno value when the status page indicated that the seqno had already been passed. MSI support has been seen to cut CPU costs by up to 40% in some workloads by avoiding other expensive interrupt handlers for frequent graphics interrupts. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: Use more consistent names for regs, and store them in a separate file.Jesse Barnes
Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: Ignore X server provided mmio addressKeith Packard
It is already correctly detected by the kernel for use in suspend/resume. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: remove settable use_mi_batchbuffer_startKeith Packard
The driver can know what hardware requires MI_BATCH_BUFFER vs MI_BATCH_BUFFER_START; there's no reason to let user mode configure this. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18SiS DRM: fix a pointer cast warningDavid Howells
Fix a pointer cast warning in the SIS DRM code. This was introduced in patch ce65a44de07f73ceda1749812b75086b7add408d. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18SiS DRM: fix the memory allocator if the SIS FB is built as a moduleDavid Howells
Fix the SIS DRM memory allocator if the SIS FB built as a module. The SIS DRM code initialises the mm allocation hooks, but _only_ if the SIS FB is not built as a module because it depends on CONFIG_FB_SIS, and that's unset if the SIS FB is not built in. It must check CONFIG_FB_SIS_MODULE as well. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18drm: remove #define's for non-linux systemsCarlos R. Mafra
There is no point in considering FreeBSD et al. in the linux kernel source code. Signed-off-by: Carlos R. Mafra <crmafra@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-17V4L/DVB (9296): Patch to remove warning message during cx88-dvb compilationIgor M. Liplianin
Remove warning message during cx88-dvb compilation. Also fixes double underline in function and struct names. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9294): gspca: Add a stop sequence in t613.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9293): gspca: Separate and fix the sensor dependant sequences in t613.Leandro Costantino
Signed-off-by: Leandro Costantino <lcostantino@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9292): gspca: Call the control setting functions at init time in t613.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9291): gspca: Do not set the white balance temperature by default ↵Jean-Francois Moine
in t613. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9290): gspca: Adjust the sensor init sequences in t613.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9289): gspca: Other sensor identified as om6802 in t613.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9288): gspca: Write to the USB device and not USB interface in t613.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9287): gspca: Change the name of the multi bytes write function in ↵Jean-Francois Moine
t613. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9286): gspca: Compilation problem of gspca.c and the kernel version.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9283): Correct typo and enable setting the gain on the mt9m111 sensorErik Andrén
A typo was introduced during the gspca conversion, crippling the ability to control the gain on the mt9m111 sensor. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9282): Properly iterate the urbs when destroying them.Erik Andrén
Properly iterate the allocated when freeing the urbs, this fixes a memory leak Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9281): gspca: Add hflip and vflip to the po1030 sensorErik Andren
Signed-off-by: Erik Andren <erik.andren@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9280): gspca: Use the gspca debug macrosErik Andren
Signed-off-by: Erik Andren <erik.andren@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9279): gspca: Correct some copyright headersErik Andren
Signed-off-by: Erik Andren <erik.andren@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9278): gspca: Remove the m5602_debug variableErik Andren
Signed-off-by: Erik Andren <erik.andren@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9277): gspca: propagate an error in m5602_start_transfer()Erik Andren
Signed-off-by: Erik Andren <erik.andren@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9276): videobuf-dvb: two functions are now staticMauro Carvalho Chehab
This patch marks those two functions as static: static int videobuf_dvb_register_adapter(struct videobuf_dvb_frontends *fe, static int videobuf_dvb_register_frontend(struct dvb_adapter *adapter, Since MFE patches changed their calls by videobuf_dvb_register_bus. To avoid having to declare the prototypes, the patch moves videobuf_dvb_register_bus() to be after the declaration of the above functions used there. Cc: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9275): dvb: input data pointer of cx24116_writeregN() should be constGeert Uytterhoeven
| drivers/media/dvb/frontends/cx24116.c:573: warning: passing argument 3 of 'cx24116_writeregN' discards qualifiers from pointer target type Make the `data' input pointer parameter of cx24116_writeregN() const to kill the warning. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9274): Remove spurious messages and turn into debug.Steven Toth
Remove spurious messages and turn into debug. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9273): MFE: videobuf-dvb.c checkpatch cleanup as part of MFE mergeSteven Toth
MFE: videobuf-dvb.c checkpatch cleanup as part of MFE merge Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9272): mxl5005s: Bug fix stopped DVB-T from working the second time ↵Jose Alberto Reguero
around. Jose reported: I am using a Avermedia Volar X with af9015 driver(DVB-T). The first time you use the card, first call reconfigure with MXL_QAM, and when tune DVB-T it calls reconfigure with MXL_DVBT. But if you close the frontend and open again, it calls reconfigure with MXL_QAM, but not call reconfigure with MXL_DVBT because state->current_mode don't change (is MXL_DVBT). Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9271): videobuf: data storage optimisation (2)Darron Broad
To optimise data storage even further one other redundant var has been removed. This also removes a redundant assignment. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9270): cx24116: optimise emulated auto-pilotChristophe Thommeret
Christophe divulged the following: "Since 8PSK (and higher mod) signals are very likely to have pilot symbols, pilot_auto should start with pilot_on for 8PSK. And since QPSK signals are unlikely to have pilot, pilot_auto should start with pilot_off for QPSK. Without the patch: QPSK tuning delay: ~100ms 8PSK tuning delay: ~900ms with patch: QPSK tuning delay: ~100ms 8PSK tuning delay: ~100ms " This patch does as Cristophe asks. In emulated auto-pilot we choose pilot-on for tuning PSK_8 and pilot-off for tuning QPSK. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9269): cx88: add I2S-ADC tvaudio methodDarron Broad
This adds I2S-ADC tvaudio mode as a formal method of audio delivery. This fixes one bug and adds fm audio via I2S-ADC on cards that support it. The bug occured before when I2S-ADC mode was initiated on composite/s-video open but was then reset within 500ms by the audio thread which used any previous audio tuning details. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9268): tuner: add FMD1216MEX tunerDarron Broad
This tuner was already supported by proxy as an FMD1216ME, however, the MEX uses a different FM Radio IF so this addition is now required. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9267): cx88: Update of audio routing config for FM radioDarron Broad
This adds audio routing for the hvr-1300/3000/4000 cards enabling FM audio for the I2S ADC method of the cx88. At this time only the HVR-4000 has been tested. It is assumed the HVR-3000/1300 are the same. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9266): videobuf: properly handle attachment failureDarron Broad
This fixes attachment failure where we now unwind attachment and skip non-attached nodes where necessary so we can survive a fault situation correctly. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9265): videobuf: data storage optimisationDarron Broad
To optimise data storage redundant vars are removed. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9264): MFE: bugfix: multi-frontend mutual exclusion parallel openDarron Broad
When moving from one frontend to another an application could spawn multiple threads opening the same new frontend and in some circumstances all of these could become delayed waiting for the previous frontend readers or previous frontend writer thread to complete. In this scenario the first thread will succeed on open to bring the new frontend online but any others will return EBUSY. This is a fault. If the first succeeds and all others are on the same frontend then they should succeed also. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9263): mxl5005s: Checkpatch complianceSteven Toth
mxl5005s: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9262): cx88: Change spurious buffer message into a debug only messageSteven Toth
A number of users have complained that their syslog often shows this messages but it doesn't impact performance. I'm changing this to a debug message, so developers will still see the message during testing and users will no longer be bothered by this. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9261): xc5000: Checkpatch complianceSteven Toth
xc5000: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9260): cx24123: Checkpatch complianceSteven Toth
cx24123: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9259): s5h1411: Checkpatch complianceSteven Toth
s5h1411: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9258): s5h1409: Checkpatch complianceSteven Toth
s5h1409: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9257): cx24116: Checkpatch compliance #3Steven Toth
cx24116: Checkpatch compliance #3 Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9256): cx22702: Checkpatch complianceSteven Toth
cx22702: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9255): tda10048: Checkpatch complianceSteven Toth
tda10048: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9254): cx24116: Checkpatch compliance #2Steven Toth
cx24116: Checkpatch compliance #2 Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9253): cx24116: Checkpatch complianceSteven Toth
cx24116: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>