| Age | Commit message (Collapse) | Author |
|---|
|
At the end of a 128b/132b link training sequence, the HW expects the
transcoder training pattern to be set to TPS2 and from that to normal
mode (disabling the training pattern). Transitioning from TPS1 directly
to normal mode leaves the transcoder in a stuck state, resulting in
page-flip timeouts later in the modeset sequence.
Atm, in case of a failure during link training, the transcoder may be
still set to output the TPS1 pattern. Later the transcoder is then set
from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading
to modeset failures later as described above. Fix this by setting the
training patter to TPS2, if the link training failed at any point.
The clue in the specification about the above HW behavior is the
explicit mention that TPS2 must be set after the link training sequence
(and there isn't a similar requirement specified for the 8b/10b link
training), see the Bspec links below.
v2: Add bspec aspect/link to the commit log. (Jani)
Bspec: 54128, 65448, 68849
Cc: stable@vger.kernel.org # v5.18+
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-2-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Error handling was wrong, causing unhandled transaction restart errors.
check_directory_size() was also inefficient, since keys in multiple
snapshots would be iterated over once for every snapshot. Convert it to
the same scheme used for i_sectors and subdir count checking.
Cc: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When compiling without CONFIG_IA32_EMULATION, there can be some errors:
drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘mailbox_release_msg’:
drivers/accel/amdxdna/amdxdna_mailbox.c:197:2: error: implicit declaration
of function ‘kfree’.
197 | kfree(mb_msg);
| ^~~~~
drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘xdna_mailbox_send_msg’:
drivers/accel/amdxdna/amdxdna_mailbox.c:418:11: error:implicit declaration
of function ‘kzalloc’.
418 | mb_msg = kzalloc(sizeof(*mb_msg) + pkg_size, GFP_KERNEL);
| ^~~~~~~
Add the missing include.
Fixes: b87f920b9344 ("accel/amdxdna: Support hardware mailbox")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211015354.3388171-1-suhui@nfschina.com
|
|
directory nodes
If the reparse point was not handled (indicated by the -EOPNOTSUPP from
ops->parse_reparse_point() call) but reparse tag is of type name surrogate
directory type, then treat is as a new mount point.
Name surrogate reparse point represents another named entity in the system.
From SMB client point of view, this another entity is resolved on the SMB
server, and server serves its content automatically. Therefore from Linux
client point of view, this name surrogate reparse point of directory type
crosses mount point.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
parse_reparse_point()
This would help to track and detect by caller if the reparse point type was
processed or not.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
POSIX extensions
If a file size has bits 0x410 = ATTR_DIRECTORY | ATTR_REPARSE set
then during queryinfo (stat) the file is regarded as a directory
and subsequent opens can fail. A simple test example is trying
to open any file 1040 bytes long when mounting with "posix"
(SMB3.1.1 POSIX/Linux Extensions).
The cause of this bug is that Attributes field in smb2_file_all_info
struct occupies the same place that EndOfFile field in
smb311_posix_qinfo, and sometimes the latter struct is incorrectly
processed as if it was the first one.
Reported-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Tested-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with flexible-array members in the
middle of other structs, we use the `__struct_group()` helper to
separate the flexible arrays from the rest of the members in the
flexible structures. We then use the newly created tagged `struct
smb2_file_link_info_hdr` and `struct smb2_file_rename_info_hdr`
to replace the type of the objects causing trouble: `rename_info`
and `link_info` in `struct smb2_compound_vars`.
We also want to ensure that when new members need to be added to the
flexible structures, they are always included within the newly created
tagged structs. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
So, with these changes, fix 86 of the following warnings:
fs/smb/client/cifsglob.h:2335:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
fs/smb/client/cifsglob.h:2334:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
drm_atomic_helper_wait_for_flip_done()
drm_atomic_helper_wait_for_flip_done() will wait for pages flips on all
CRTCs affected by a given commit. It takes the drm_atomic_state being
committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-26-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_cleanup_done()
drm_atomic_helper_wait_for_dependencies() is the final part of a commit
and signals it completion. It takes the drm_atomic_state being committed
as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-25-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_cleanup_planes() is one of the final part of a commit,
and will free up all plane resources used in the previous commit. It
takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-24-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_wait_for_vblanks() waits for vblank events on all the
CRTCs affected by a commit. It takes the drm_atomic_state being
committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-23-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_hw_done() signals hardware completion of a
given commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-22-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_fake_vblank() fake a vblank event if needed when a new
commit is being applied. It takes the drm_atomic_state being committed
as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-21-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_writebacks()
drm_atomic_helper_commit_writebacks() updates all writeback connectors
affected by a new commit. It takes the drm_atomic_state being committed
as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-20-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_bridge_chain_enable() enables all bridges affected by a new
commit. It takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-19-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_bridge_chain_pre_enable() enables all bridges affected by
a new commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-18-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_modeset_enables()
drm_atomic_helper_commit_modeset_enables() enables all outputs affected
by a new commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-17-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_planes() updates all planes affected by a new
commit. It takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-16-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
crtc_set_mode() deals with calling the modeset related hooks for CRTC,
connectors and bridges if and when a new commit changes them. It takes
the drm_atomic_state being committed as a parameter.
However, that parameter name is called as old_state, which is pretty
confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-15-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_update_legacy_modeset_state()
drm_atomic_helper_update_legacy_modeset_state() updates all the legacy
modeset pointers a connector, encoder or CRTC might have with the ones
being setup by a given commit. It takes the drm_atomic_state being
committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-14-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_bridge_chain_post_disable() disables all bridges affected by
a new commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-13-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_bridge_chain_disable() disables all bridges affected by a new
commit. It takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-12-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
disable_outputs() disables all connectors and CRTCs affected by a
commit. It takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called as old_state, which is pretty
confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-11-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_modeset_disables() disables all the outputs affected
by a commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-10-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_tail_rpm() is the final part of an atomic
commit, and is given the state being committed as a parameter.
However, that parameter is named old_state, but documented as the "new
modeset state" which is all super confusing.
Let's rename that parameter to state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-9-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_tail() is the final part of an atomic commit,
and is given a parameter with the drm_atomic_state being committed.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-8-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_wait_for_dependencies()
drm_atomic_helper_wait_for_dependencies() waits for all the dependencies
a commit has before going forward with it. It takes the drm_atomic_state
being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-7-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Even though the commit_tail () drm_atomic_state parameter is called
old_state, it's actually the state being committed which is confusing.
It's even more confusing since the atomic_commit_tail hook being called
by commit_tail() parameter is called state.
Let's rename the variable from old_state to state to make it less
confusing.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-6-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_post_disable hook prototype to
pass it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-5-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_disable hook prototype to pass
it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-4-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_enable hook prototype to pass it
directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-3-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_pre_enable hook prototype to
pass it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-2-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
After some discussions on the mailing-list for an earlier revision of
the series, it was suggested to document the evolution of
drm_atomic_state and its use by drivers to explain some of the confusion
one might still encounter when reading the framework code.
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/dri-devel/Z4jtKHY4qN3RNZNG@phenom.ffwll.local/
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-1-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
xe_exec_queue_create_ioctl() performs a lookup of the xe_gt for the GT
ID passed from userspace, but the result is never actually used. Since
there's already a separate (and earlier) check that the ID passed from
userspace is valid, the unnecessary lookup can be removed.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218200511.4050060-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
IO_NODE_ALLOC_CACHE_MAX has been unused since commit fbbb8e991d86
("io_uring/rsrc: get rid of io_rsrc_node allocation cache") removed the
rsrc_node_cache.
IO_RSRC_TAG_TABLE_SHIFT and IO_RSRC_TAG_TABLE_MASK have been unused
since commit 7029acd8a950 ("io_uring/rsrc: get rid of per-ring
io_rsrc_node list") removed the separate tag table for registered nodes.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20250219033444.2020136-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If "rpc" is an error pointer then return directly. Otherwise it leads
to an error pointer dereference.
Fixes: 50f290053d79 ("drm/nouveau: support handling the return of large GSP message")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b7052ac0-98e4-433b-ad58-f563bf51858c@stanley.mountain
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/fixes
Fix writes on SST flashes
Commit 18bcb4aa54ea ("mtd: spi-nor: sst: Factor out common write
operation to `sst_nor_write_data()`") introduced a bug where only one
byte of data is written, regardless of the number of bytes requested.
This causes the driver to use the incorrect write size for flashes using
the SST byte programming, and to spit out a warning.
# -----BEGIN PGP SIGNATURE-----
#
# iIoEABYIADIWIQQTlUWNzXGEo3bFmyIR4drqP028CQUCZ7NEiBQccHJhdHl1c2hA
# a2VybmVsLm9yZwAKCRAR4drqP028CTVnAP9krBOLfmlYO94PntaDscgjcehnxbuF
# PEQby8/KlEnX0gEA5K73/0oQIZUnHQ98E6ntAtKoYD5zGNAJaYDpw+66CAU=
# =5xea
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 17 Feb 2025 03:15:36 PM CET
# gpg: using EDDSA key 1395458DCD7184A376C59B2211E1DAEA3F4DBC09
# gpg: issuer "pratyush@kernel.org"
# gpg: Good signature from "Pratyush Yadav <p.yadav@ti.com>" [expired]
# gpg: aka "Pratyush Yadav <me@yadavpratyush.com>" [expired]
# gpg: issuer "pratyush@kernel.org" does not match any User ID
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 805C 3923 2FBE 108C 49E1 663C F650 3556 C11B 1CCD
# Subkey fingerprint: 1395 458D CD71 84A3 76C5 9B22 11E1 DAEA 3F4D BC09
|
|
Add NULL check before variable dereference to fix static checker warning.
Fixes: d76d22b5096c ("mtd: rawnand: cadence: use dma_map_resource for sdma address")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/e448a22c-bada-448d-9167-7af71305130d@stanley.mountain/
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
I was pondering with myself for a while if I should just make it official
that I'm not really involved in the kernel community anymore, neither as a
reviewer, nor as a maintainer.
Most of the time I simply excused myself with "if something urgent comes
up, I can chime in and help out". Lyude and Danilo are doing a wonderful
job and I've put all my trust into them.
However, there is one thing I can't stand and it's hurting me the most.
I'm convinced, no, my core believe is, that inclusivity and respect,
working with others as equals, no power plays involved, is how we should
work together within the Free and Open Source community.
I can understand maintainers needing to learn, being concerned on
technical points. Everybody deserves the time to understand and learn. It
is my true belief that most people are capable of change eventually. I
truly believe this community can change from within, however this doesn't
mean it's going to be a smooth process.
The moment I made up my mind about this was reading the following words
written by a maintainer within the kernel community:
"we are the thin blue line"
This isn't okay. This isn't creating an inclusive environment. This isn't
okay with the current political situation especially in the US. A
maintainer speaking those words can't be kept. No matter how important
or critical or relevant they are. They need to be removed until they
learn. Learn what those words mean for a lot of marginalized people. Learn
about what horrors it evokes in their minds.
I can't in good faith remain to be part of a project and its community
where those words are tolerated. Those words are not technical, they are
a political statement. Even if unintentionally, such words carry power,
they carry meanings one needs to be aware of. They do cause an immense
amount of harm.
I wish the best of luck for everybody to continue to try to work from
within. You got my full support and I won't hold it against anybody trying
to improve the community, it's a thankless job, it's a lot of work. People
will continue to burn out.
I got burned out enough by myself caring about the bits I maintained, but
eventually I had to realize my limits. The obligation I felt was eating me
from inside. It stopped being fun at some point and I reached a point
where I simply couldn't continue the work I was so motivated doing as I've
did in the early days.
Please respect my wishes and put this statement as is into the tree.
Leaving anything out destroys its entire meaning.
Respectfully
Karol
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250215073753.1217002-2-kherbst@redhat.com
|
|
Most kernel configs enable multiple Tegra SoC generations, causing this
typo to go unnoticed. But in the case where a kernel config is strictly
for Tegra186, this is a problem.
Fixes: 989863d7cbe5 ("drm/nouveau/pmu: select implementation based on available firmware")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218-nouveau-gm10b-guard-v2-1-a4de71500d48@gmail.com
|
|
Currently intel_psr_disable is dumping out warning if PSR is not
supported. On monitor supporting only Panel Replay we are seeing this
warning. Fix this by checking Panel Replay support as well.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213111628.2183753-1-jouni.hogander@intel.com
|
|
The dedicated display PHYs reset to a power state that blocks S0ix,
increasing idle system power. After a system reset (cold boot,
S3/4/5, warm reset) if a dedicated PHY is not being brought up
shortly, use these steps to move the PHY to the lowest power state
to save power.
1. Follow the PLL Enable Sequence, using any valid frequency such
as DP 1.62 GHz. This brings lanes out of reset and enables the
PLL to allow powerdown to be moved to the Disable state.
2. Follow PLL Disable Sequence. This moves powerdown to the Disable
state and disables the PLL.
v2: Rename WA function to more descriptive (Jani)
For PTL, only port A needs this wa
Add helpers to check presence of C10 phy and pll enabling (Imre)
v3: Rename wa function (Imre)
Check return value of C10 pll tables readout (Imre)
Use PLL request to check pll enabling (Imre)
v4: Move intel_cx0_pll_is_enabled() right after
intel_cx0_pll_disable() (Imre)
Add drm_WARN_ON() if C10 state cannot be calculated from
the tables (Imre)
v5: Add debug message on PLL enabling (Imre)
Add check for intel_encoder_is_dig_port() (Imre)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218100019.740556-3-mika.kahola@intel.com
|
|
For PLL programming for C10 and C20 we don't need to
carry crtc_state but instead use only necessary parts
of the crtc_state i.e. pll_state.
This change is needed to PTL wa 14023648281 where we would
need to otherwise pass an artificial crtc_state with majority
of the struct members initialized as NULL.
v2: Use err instead of val for error handling (Imre)
Unify parameter order (Imre)
v3: Fix misplaced port_clock, and is_dp in
intel_c20_pll_program() call (Imre)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218100019.740556-2-mika.kahola@intel.com
|
|
The current implementation has a bug: If the current css doesn't
contain any pool that is a descendant of the "pool" (i.e. when
found_descendant == false), then "pool" will point to some unrelated
pool. If the current css has a child, we'll overwrite parent_pool with
this unrelated pool on the next iteration.
Since we can just check whether a pool refers to the same region to
determine whether or not it's related, all the additional pool tracking
is unnecessary, so just switch to using css_for_each_descendant_pre for
traversal.
Fixes: b168ed458dde ("kernel/cgroup: Add "dmem" memory accounting cgroup")
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127152754.21325-1-friedrich.vock@gmx.de
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
Kuniyuki Iwashima says:
====================
net: Fix race of rtnl_net_lock(dev_net(dev)).
Yael Chemla reported that commit 7fb1073300a2 ("net: Hold rtnl_net_lock()
in (un)?register_netdevice_notifier_dev_net().") started to trigger KASAN's
use-after-free splat.
The problem is that dev_net(dev) fetched before rtnl_net_lock() might be
different after rtnl_net_lock().
The patch 2 fixes the issue by checking dev_net(dev) after rtnl_net_lock(),
and the patch 3 fixes the same potential issue that would emerge once RTNL
is removed.
v4: https://lore.kernel.org/20250212064206.18159-1-kuniyu@amazon.com
v3: https://lore.kernel.org/20250211051217.12613-1-kuniyu@amazon.com
v2: https://lore.kernel.org/20250207044251.65421-1-kuniyu@amazon.com
v1: https://lore.kernel.org/20250130232435.43622-1-kuniyu@amazon.com
====================
Link: https://patch.msgid.link/20250217191129.19967-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The following sequence is basically illegal when dev was fetched
without lookup because dev_net(dev) might be different after holding
rtnl_net_lock():
net = dev_net(dev);
rtnl_net_lock(net);
Let's use rtnl_net_dev_lock() in unregister_netdev().
Note that there is no real bug in unregister_netdev() for now
because RTNL protects the scope even if dev_net(dev) is changed
before/after RTNL.
Fixes: 00fb9823939e ("dev: Hold per-netns RTNL in (un)?register_netdev().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250217191129.19967-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the cited commit, dev_net(dev) is fetched before holding RTNL
and passed to __unregister_netdevice_notifier_net().
However, dev_net(dev) might be different after holding RTNL.
In the reported case [0], while removing a VF device, its netns was
being dismantled and the VF was moved to init_net.
So the following sequence is basically illegal when dev was fetched
without lookup:
net = dev_net(dev);
rtnl_net_lock(net);
Let's use a new helper rtnl_net_dev_lock() to fix the race.
It fetches dev_net_rcu(dev), bumps its net->passive, and checks if
dev_net_rcu(dev) is changed after rtnl_net_lock().
[0]:
BUG: KASAN: slab-use-after-free in notifier_call_chain (kernel/notifier.c:75 (discriminator 2))
Read of size 8 at addr ffff88810cefb4c8 by task test-bridge-lag/21127
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:489)
kasan_report (mm/kasan/report.c:604)
notifier_call_chain (kernel/notifier.c:75 (discriminator 2))
call_netdevice_notifiers_info (net/core/dev.c:2011)
unregister_netdevice_many_notify (net/core/dev.c:11551)
unregister_netdevice_queue (net/core/dev.c:11487)
unregister_netdev (net/core/dev.c:11635)
mlx5e_remove (drivers/net/ethernet/mellanox/mlx5/core/en_main.c:6552 drivers/net/ethernet/mellanox/mlx5/core/en_main.c:6579) mlx5_core
auxiliary_bus_remove (drivers/base/auxiliary.c:230)
device_release_driver_internal (drivers/base/dd.c:1275 drivers/base/dd.c:1296)
bus_remove_device (./include/linux/kobject.h:193 drivers/base/base.h:73 drivers/base/bus.c:583)
device_del (drivers/base/power/power.h:142 drivers/base/core.c:3855)
mlx5_rescan_drivers_locked (./include/linux/auxiliary_bus.h:241 drivers/net/ethernet/mellanox/mlx5/core/dev.c:333 drivers/net/ethernet/mellanox/mlx5/core/dev.c:535 drivers/net/ethernet/mellanox/mlx5/core/dev.c:549) mlx5_core
mlx5_unregister_device (drivers/net/ethernet/mellanox/mlx5/core/dev.c:468) mlx5_core
mlx5_uninit_one (./include/linux/instrumented.h:68 ./include/asm-generic/bitops/instrumented-non-atomic.h:141 drivers/net/ethernet/mellanox/mlx5/core/main.c:1563) mlx5_core
remove_one (drivers/net/ethernet/mellanox/mlx5/core/main.c:965 drivers/net/ethernet/mellanox/mlx5/core/main.c:2019) mlx5_core
pci_device_remove (./include/linux/pm_runtime.h:129 drivers/pci/pci-driver.c:475)
device_release_driver_internal (drivers/base/dd.c:1275 drivers/base/dd.c:1296)
unbind_store (drivers/base/bus.c:245)
kernfs_fop_write_iter (fs/kernfs/file.c:338)
vfs_write (fs/read_write.c:587 (discriminator 1) fs/read_write.c:679 (discriminator 1))
ksys_write (fs/read_write.c:732)
do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f6a4d5018b7
Fixes: 7fb1073300a2 ("net: Hold rtnl_net_lock() in (un)?register_netdevice_notifier_dev_net().")
Reported-by: Yael Chemla <ychemla@nvidia.com>
Closes: https://lore.kernel.org/netdev/146eabfe-123c-4970-901e-e961b4c09bc3@nvidia.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250217191129.19967-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net_drop_ns() is NULL when CONFIG_NET_NS is disabled.
The next patch introduces a function that increments
and decrements net->passive.
As a prep, let's rename and export net_free() to
net_passive_dec() and add net_passive_inc().
Suggested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/CANn89i+oUCt2VGvrbrweniTendZFEh+nwS=uonc004-aPkWy-Q@mail.gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250217191129.19967-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix incorrect data offset read in the pd692x0_pi_get_pw_limit callback.
The issue was previously unnoticed as it was only used by the regulator
API and not thoroughly tested, since the PSE is mainly controlled via
ethtool.
The function became actively used by ethtool after commit 3e9dbfec4998
("net: pse-pd: Split ethtool_get_status into multiple callbacks"),
which led to the discovery of this issue.
Fix it by using the correct data offset.
Fixes: a87e699c9d33 ("net: pse-pd: pd692x0: Enhance with new current limit and voltage read callbacks")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250217134812.1925345-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We requested in the past that GVE patches coming out of Google should
be submitted only by GVE maintainers. There were too many patches
posted which didn't follow the subsystem guidance.
Recently Joshua was added to maintainers, but even tho he was asked
to follow the netdev "FAQ" in the past [1] he does not follow
the local customs. It is not reasonable for a person who hasn't read
the maintainer entry for the subsystem to be a driver maintainer.
We can re-add once Joshua does some on-list reviews to prove
the fluency with the upstream process.
Link: https://lore.kernel.org/20240610172720.073d5912@kernel.org # [1]
Link: https://patch.msgid.link/20250215162646.2446559-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
