| Age | Commit message (Collapse) | Author |
|---|
|
The __bcm_sysport_tx_reclaim() function is used to reclaim transmit
resources in different places within the driver. Most of them should
not affect the state of the transit flow control.
Introduce bcm_sysport_tx_clean() which cleans the ring, but does not
re-enable flow control towards the networking stack, and make
bcm_sysport_tx_reclaim() do the actual transmit queue flow control.
Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
AHCI provides the register PORTS_IMPL to let the software know which port
is supported. The register must be initialized by the bootloader. However
in some cases u-boot doesn't properly initialize this value (if it is not
compiled with SATA support for example or if the SATA initialization fails).
The DTS entry "ports-implemented" can be used to override the value in
PORTS_IMPL.
Without this patch the SATA will not work in the following two cases:
* if there has been a failure to initialize SATA in u-boot.
* if ahci_platform module has been removed and re-inserted. The reason is
that the content of PORTS_IMPL is lost after the module is removed.
I suspect that it's because the controller is reset by the hwmod.
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
[tony@atomide.com: updated comments with what goes wrong]
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Due to the way kbuild works, this header was unintentionally exported
back in 2013 when it was created, despite it not being in a uapi/
directory. This is very non-intuitive behaviour by Kbuild.
However, we've had this include exported to userland for almost four
years, and searching google for "ARM types.h __UINTPTR_TYPE__" gives
no hint that anyone has complained about it. So, let's make it
officially exported in this state.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Commit bcb6f6d2b9c2 ("fuse: use timespec64") introduced clamped nsec values
in time_to_jiffies but used the max of nsec and NSEC_PER_SEC - 1 instead of
the min. Because of this, dentries would stay in the cache longer than
requested and go stale in scenarios that relied on their timely eviction.
Fixes: bcb6f6d2b9c2 ("fuse: use timespec64")
Signed-off-by: David Sheets <dsheets@docker.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # 4.9
|
|
Using has_capability() rather than ns_capable(), we're no longer using
this header.
Cc: Jike Song <jike.song@intel.com>
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
|
|
Station structure is considered as not uploaded
(to driver) until drv_sta_state() finishes. This
call is however done after the structure is
attached to mac80211 internal lists and hashes.
This means mac80211 can lookup (and use) station
structure before it is uploaded to a driver.
If this happens (structure exists, but
sta->uploaded is false) fast_tx path can still be
taken. Deep in the fastpath call the sta->uploaded
is checked against to derive "pubsta" argument for
ieee80211_get_txq(). If sta->uploaded is false
(and sta is actually non-NULL) ieee80211_get_txq()
effectively downgraded to vif->txq.
At first glance this may look innocent but coerces
mac80211 into a state that is almost guaranteed
(codel may drop offending skb) to crash because a
station-oriented skb gets queued up on
vif-oriented txq. The ieee80211_tx_dequeue() ends
up looking at info->control.flags and tries to use
txq->sta which in the fail case is NULL.
It's probably pointless to pretend one can
downgrade skb from sta-txq to vif-txq.
Since downgrading unicast traffic to vif->txq must
not be done there's no txq to put a frame on if
sta->uploaded is false. Therefore the code is made
to fall back to regular tx() op path if the
described condition is hit.
Only drivers using wake_tx_queue were affected.
Example crash dump before fix:
Unable to handle kernel paging request at virtual address ffffe26c
PC is at ieee80211_tx_dequeue+0x204/0x690 [mac80211]
[<bf4252a4>] (ieee80211_tx_dequeue [mac80211]) from
[<bf4b1388>] (ath10k_mac_tx_push_txq+0x54/0x1c0 [ath10k_core])
[<bf4b1388>] (ath10k_mac_tx_push_txq [ath10k_core]) from
[<bf4bdfbc>] (ath10k_htt_txrx_compl_task+0xd78/0x11d0 [ath10k_core])
[<bf4bdfbc>] (ath10k_htt_txrx_compl_task [ath10k_core])
[<bf51c5a4>] (ath10k_pci_napi_poll+0x54/0xe8 [ath10k_pci])
[<bf51c5a4>] (ath10k_pci_napi_poll [ath10k_pci]) from
[<c0572e90>] (net_rx_action+0xac/0x160)
Reported-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Dmitry Vyukov reported that the syzkaller fuzzer triggered a
deadlock in the vgic setup code when an error was detected, as
the cleanup code tries to take a lock that is already held by
the setup code.
The fix is to avoid retaking the lock when cleaning up, by
telling the cleanup function that we already hold it.
Cc: stable@vger.kernel.org
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Current KVM world switch code is unintentionally setting wrong bits to
CNTHCTL_EL2 when E2H == 1, which may allow guest OS to access physical
timer. Bit positions of CNTHCTL_EL2 are changing depending on
HCR_EL2.E2H bit. EL1PCEN and EL1PCTEN are 1st and 0th bits when E2H is
not set, but they are 11th and 10th bits respectively when E2H is set.
In fact, on VHE we only need to set those bits once, not for every world
switch. This is because the host kernel runs in EL2 with HCR_EL2.TGE ==
1, which makes those bits have no effect for the host kernel execution.
So we just set those bits once for guests, and that's it.
Signed-off-by: Jintack Lim <jintack@cs.columbia.edu>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
When a VCPU blocks (WFI) and has programmed the vtimer, we program a
soft timer to expire in the future to wake up the vcpu thread when
appropriate. Because such as wake up involves a vcpu kick, and the
timer expire function can get called from interrupt context, and the
kick may sleep, we have to schedule the kick in the work function.
The work function currently has a warning that gets raised if it turns
out that the timer shouldn't fire when it's run, which was added because
the idea was that in that case the work should never have been cancelled.
However, it turns out that this whole thing is racy and we can get
spurious warnings. The problem is that we clear the armed flag in the
work function, which may run in parallel with the
kvm_timer_unschedule->timer_disarm() call. This results in a possible
situation where the timer_disarm() call does not call
cancel_work_sync(), which effectively synchronizes the completion of the
work function with running the VCPU. As a result, the VCPU thread
proceeds before the work function completees, causing changes to the
timer state such that kvm_timer_should_fire(vcpu) returns false in the
work function.
All we do in the work function is to kick the VCPU, and an occasional
rare extra kick never harmed anyone. Since the race above is extremely
rare, we don't bother checking if the race happens but simply remove the
check and the clearing of the armed flag from the work function.
Reported-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
fuse_abort_conn() moves requests from pending list to a temporary list
before canceling them. This operation races with request_wait_answer()
which also tries to remove the request after it gets a fatal signal. It
checks FR_PENDING flag to determine whether the request is still in the
pending list.
Make fuse_abort_conn() clear FR_PENDING flag so that request_wait_answer()
does not remove the request from temporary list.
This bug causes an Oops when trying to delete an already deleted list entry
in end_requests().
Fixes: ee314a870e40 ("fuse: abort: no fc->lock needed for request ending")
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # 4.2+
|
|
Make sure to check for short control transfers in order to avoid parsing
uninitialised buffer data and leaking it to user space.
Note that the backlight and macro-mode buffer constraints are kept as
loose as possible in order to avoid any regressions should the current
buffer sizes be larger than necessary.
Fixes: 6f78193ee9ea ("HID: corsair: Add Corsair Vengeance K90 driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Not all platforms support DMA to the stack, and specifically since v4.9
this is no longer supported on x86 with VMAP_STACK either.
Note that the macro-mode buffer was larger than necessary.
Fixes: 6f78193ee9ea ("HID: corsair: Add Corsair Vengeance K90 driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
ibss and mesh modes copy the ht capabilites from the band without
overriding the SMPS state. Unfortunately the default value 0 for the
SMPS field means static SMPS instead of disabled.
This results in HT ibss and mesh setups using only single-stream rates,
even though SMPS is not supposed to be active.
Initialize SMPS to disabled for all bands on ieee80211_hw_register to
ensure that the value is sane where it is not overriden with the real
SMPS state.
Reported-by: Elektra Wagenrad <onelektra@gmx.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[move VHT TODO comment to a better place]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The slave mapping should be removed together with other channel
resources when the channel is freed. If it's not unmapped it will hang
around forever after the channel is freed.
Fixes: 9f878603dbdb7db3 ("dmaengine: rcar-dmac: add iommu support for slave transfers")
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
The read_pmem() function uses memcpy_mcsafe() on x86 where an EFAULT
error code indicates a failed read. Block I/O should use EIO to
indicate failure. Other pmem code paths (like bad blocks) already use
EIO so let's be consistent.
This fixes compatibility with consumers like btrfs that try to parse the
specific error code rather than treat all errors the same.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The range size for axi is 0x2 bytes too small, as the QSPI needs
0x11c408 + 0x004 (which is 0x0011c40c, not 0x0011c40a). No errors have
been observed with this shortcoming, but fixing it for correctness.
Fixes: 329f98c1974e ("ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes")
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Correct the bcm47xx watchdog option. The convention of bcm watchdogs is
the _WDT suffix.
Fixes: 8dace3040426 ("ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers")
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
s/CONFIG_CONFIG_BCM47XX_NVRAM/CONFIG_BCM47XX_NVRAM/
Fixes: 8dace3040426 ("ARM: multi_v7_defconfig: Enable BCM47xx/BCM5301x drivers")
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Before the mdev enhancement type1 iommu used capable() to test the
capability of current task; in the course of mdev development a
new requirement, testing for another task other than current, was
raised. ns_capable() was used for this purpose, however it still
tests current, the only difference is, in a specified namespace.
Fix it by using has_capability() instead, which tests the cap for
specified task in init_user_ns, the same namespace as capable().
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This time we got a few more fixes than the previous rc's, and most of
commits were about ASoC.
The only significant change in the core side is the regression fix wrt
the aux device list handling, and all the rest are driver-specific
small / trivial fixes"
* tag 'sound-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add a quirk for Plantronics BT600
ASoC: rt5645: set sel_i2s_pre_div1 to 2
ASoC: dpcm: Avoid putting stream state to STOP when FE stream is paused
ASoC: Intel: Skylake: Release FW ctx in cleanup
ASoC: Intel: bytcr-rt5640: fix settings in internal clock mode
ASoC: fsl_ssi: set fifo watermark to more reliable value
ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLL
ASoC: nau8825: correct the function name of register
ASoC: Intel: Skylake: Fix to fail safely if module not available in path
ASoC: tlv320aic3x: Mark the RESET register as volatile
ASoC: Fix binding and probing of auxiliary components
ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data
ASoC: Intel: bytcr_rt5640: fallback mechanism if MCLK is not enabled
ASoC: hdmi-codec: use unsigned type to structure members with bit-field
ASoC: topology: kfree kcontrol->private_value before freeing kcontrol
ASoC: rsnd: don't double free kctrl
ASoC: dwc: Fix PIO mode initialization
|
|
Fix a typo in impedance setting for ethernet-phy@3
Fixes: b76db38cd8ae ("ARM: dts: dra72-evm-revc: add phy impedance settings")
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
While probing BGX we requesting appropriate QLM for it's configuration
and get LMAC count by that request. Then, while reading configured
MAC values from SSDT table we need to save them in proper mapping:
BGX[i]->lmac[j].mac = <MAC value>
to later provide for initialization stuff. In order to fill
such mapping properly we need to add lmac index to be used while
acpi initialization since at this moment bgx->lmac_count already contains
actual value.
Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix to return a negative error code from the kthread_run() error
handling case instead of 0, as done elsewhere in this function.
Fixes: cdd5de500b2c ("soc: ti: Add wkup_m3_ipc driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
In rdma_read_chunk_frmr() when ib_post_send() fails, the error code path
invokes ib_dma_unmap_sg() to unmap the sg list. It then invokes
svc_rdma_put_frmr() which in turn tries to unmap the same sg list through
ib_dma_unmap_sg() again. This second unmap is invalid and could lead to
problems when the iova being unmapped is subsequently reused. Remove
the call to unmap in rdma_read_chunk_frmr() and let svc_rdma_put_frmr()
handle it.
Fixes: 412a15c0fe53 ("svcrdma: Port to new memory registration API")
Cc: stable@vger.kernel.org
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
After the addition of the frame_retries callback we could run into cases where
a ATUSB device with an older firmware version would now longer be able to bring
the interface up.
We keep this functionality disabled now if the minimum firmware version for this
feature is not available.
Fixes: 5d82288b93db3bc ("ieee802154: atusb: implement .set_frame_retries
ops callback")
Reported-by: Alexander Aring <aar@pengutronix.de>
Acked-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Driver code never touches "rstn" signal in atomic context, so there's
no need to implicitly put such restriction on it by using gpio_set_value
to manipulate it. Replace gpio_set_value to gpio_set_value_cansleep to
fix that.
As a an example of where such restriction might be inconvenient,
consider a hardware design where "rstn" is connected to a pin of I2C/SPI
GPIO expander chip.
Cc: Chris Healy <cphealy@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
From 4.9 we should really avoid using the stack here as this will not be DMA
able on various platforms. This changes a buffer that was introduced in the
4.10 merge window.
Fixes: 6cc33eba232c ("ieee802154: atusb: try to read permanent extended
address from device")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
In the unlikely case were the firmware is new enough but the actual USB command
still fails make sure we set a random address and return.
Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
From 4.9 we should really avoid using the stack here as this will not be DMA
able on various platforms. This changes the buffers already being present in
time of 4.9 being released. This should go into stable as well.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The inet6addr_chain is an atomic notifier chain, so we can't call
anything that might sleep (like lock_sock)... instead of closing the
socket from svc_age_temp_xprts_now (which is called by the notifier
function), just have the rpc service threads do it instead.
Cc: stable@vger.kernel.org
Fixes: c3d4879e01be "sunrpc: Add a function to close..."
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Context expiry times are in units of seconds since boot, not unix time.
The use of get_seconds() here therefore sets the expiry time decades in
the future. This prevents timely freeing of contexts destroyed by
client RPC_GSS_PROC_DESTROY requests. We'd still free them eventually
(when the module is unloaded or the container shut down), but a lot of
contexts could pile up before then.
Cc: stable@vger.kernel.org
Fixes: c5b29f885afe "sunrpc: use seconds since boot in expiry cache"
Reported-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Oops--in 916d2d844afd I moved some constants into an array for
convenience, but here I'm accidentally writing to that array.
The effect is that if you ever encounter a filesystem lacking support
for ACLs or security labels, then all queries of supported attributes
will report that attribute as unsupported from then on.
Fixes: 916d2d844afd "nfsd: clean up supported attribute handling"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Otherwise, the attribute cache remains marked as being expired.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
If the unlink wasn't successful, then the directory has presumably not
changed.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
If a file is renamed, but stays in the same directory, we will still receive
2 change_info4 structures describing the change to that directory, but we
only want to apply it once.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
We don't want to invalidate the directory attribute and data cache unless we
know that a file was created, or the change attribute differs from the one
in our cache.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
rtm_table is an 8-bit field while table ids are allowed up to u32. Commit
709772e6e065 ("net: Fix routing tables with id > 255 for legacy software")
added the preference to set rtm_table in dumps to RT_TABLE_COMPAT if the
table id is > 255. The table id returned on get route requests should do
the same.
Fixes: c36ba6603a11 ("net: Allow user to get table id from route lookup")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 6ffe1c4cd0a7 ("net: qcom/emac: fix of_node and phydev leaks")
fixed the problem with reference leaks on phydev, but the fix is
device-tree specific. When the driver unloads, the reference is
dropped only on DT systems.
Instead, it's cleaner if up grab an reference on ACPI systems.
When the driver unloads, we can drop the reference without having
to check whether we're on a DT system.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Handle failure in lwtunnel_fill_encap adding attributes to skb.
Fixes: 571e722676fe ("ipv4: support for fib route lwtunnel encap attributes")
Fixes: 19e42e451506 ("ipv6: support for fib route lwtunnel encap attributes")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On AMD's SB800 and upwards, the SMBus is shared with the Integrated
Micro Controller (IMC).
The platform provides a hardware semaphore to avoid race conditions
among them. (Check page 288 of the SB800-Series Southbridges Register
Reference Guide http://support.amd.com/TechDocs/45482.pdf)
Without this patch, many access to the SMBus end with an invalid
transaction or even with the bus stalled.
Reported-by: Alexandre Desnoyers <alex@qtec.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>:
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Trivial fix to spelling mistake in WARN message, insufficient has
an insufficient number of i's in the spelling.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"As promised last week, here's some stability fixes from Christoph and
Jan Kara:
- fix free space request handling when low on disk space
- remove redundant log failure error messages
- free truncated dirty pages instead of letting them build up
forever"
* tag 'xfs-for-linus-4.10-rc4-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Timely free truncated dirty pages
xfs: don't print warnings when xfs_log_force fails
xfs: don't rely on ->total in xfs_alloc_space_available
xfs: adjust allocation length in xfs_alloc_space_available
xfs: fix bogus minleft manipulations
xfs: bump up reserved blocks in xfs_alloc_set_aside
|
|
In of_i2c_register_device(), when the check for
device address validity fails we print the info.addr,
which has not been assigned properly.
Fix this by printing the actual invalid address.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Fixes: b4e2f6ac1281 ("i2c: apply DT flags when probing")
Cc: stable@kernel.org
|
|
Falling back unconditionally to HostNotify as primary client's interrupt
breaks some drivers which alter their functionality depending on whether
interrupt is present or not, so let's introduce a board flag telling I2C
core explicitly if we want wired interrupt or HostNotify-based one:
I2C_CLIENT_HOST_NOTIFY.
For DT-based systems we introduce "host-notify" property that we convert
to I2C_CLIENT_HOST_NOTIFY board flag.
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
i2c_smbus_xfer() does not always fill an entire block, allowing
kernel stack memory disclosure through the temp variable. Clear
it before it's read to.
Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
|
|
Pull remoteproc fixes from Bjorn Andersson:
"This fixes two regressions that have been reported to be introduced in
v4.10-rc1.
- correct an incorrect usage of the kref api
- revert the change to make the resource table read-only. As the
space each vdev resource is used as virtio device config space it
must be shared with the remote"
* tag 'rproc-v4.10-fixes' of git://github.com/andersson/remoteproc:
Revert "remoteproc: Merge table_ptr and cached_table pointers"
remoteproc: fix vdev reference management
|
|
Pull rpmsg fixes from Bjorn Andersson:
"This fixes a regression introduced in v4.10-rc1 that prohibits
multiple channels with the same name but different endpoint addresses
to be used"
* tag 'rpmsg-v4.10-fixes' of git://github.com/andersson/remoteproc:
rpmsg: virtio_rpmsg_bus: fix channel creation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- device descriptor length validation fix to hid-cypress driver from
Greg
- introduction of a short delay into i2c-hid, which is not really
mandated by the spec, but fixes Asus Touchpads
- Petzl USB connectable flashlight quirk from myself
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: i2c-hid: Add sleep between POWER ON and RESET
HID: hid-cypress: validate length of report
HID: ignore Petzl USB headlamp
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux
Pull scsi target fixes from Bart Van Assche:
- a series of bug fixes for the XCOPY implementation from David
Disseldorp
- one bug fix for the ibmvscsis driver, a driver that is used for
communication between partitions on IBM POWER systems.
* 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux:
ibmvscsis: Fix srp_transfer_data fail return code
target: support XCOPY requests without parameters
target: check for XCOPY parameter truncation
target: use XCOPY segment descriptor CSCD IDs
target: check XCOPY segment descriptor CSCD IDs
target: simplify XCOPY wwn->se_dev lookup helper
target: return UNSUPPORTED TARGET/SEGMENT DESC TYPE CODE sense
target: bounds check XCOPY total descriptor list length
target: bounds check XCOPY segment descriptor list
target: use XCOPY TOO MANY TARGET DESCRIPTORS sense
target: add XCOPY target/segment desc sense codes
|
