| Age | Commit message (Collapse) | Author |
|---|
|
Add initial audio support limited to HDMI i2s.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20200421163935.775935-7-jbrunet@baylibre.com
|
|
Add initial audio support limited to HDMI i2s.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20200421163935.775935-6-jbrunet@baylibre.com
|
|
Add initial audio support limited to HDMI i2s.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20200421163935.775935-5-jbrunet@baylibre.com
|
|
Add basic audio support on the p230/q200 reference design.
This initial support is limited to HDMI i2s and SPDIF (LPCM).
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20200421163935.775935-4-jbrunet@baylibre.com
|
|
Add the AIU audio device to the Amlogic GX SoC family DT.
ATM, this device provides the i2s and spdif output stages and also
the hdmi and internal codec glues.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20200421163935.775935-3-jbrunet@baylibre.com
|
|
into HEAD
* 'reset/meson-gxl-dac' of git://git.pengutronix.de/pza/linux:
dt-bindings: reset: meson: add gxl internal dac reset
|
|
Let the PHY generate the RX and TX delay on the Odroid-C1 and MXIII
Plus.
Previously we did not know that these boards used an RX delay. We
assumed that setting the TX delay on the MAC side It turns out that
these boards also require an RX delay of 2ns (verified on Odroid-C1,
but the u-boot code uses the same setup on both boards). Ethernet only
worked because u-boot added this RX delay on the MAC side.
The 4ns TX delay was also wrong and the result of using an unsupported
RGMII TX clock divider setting. This has been fixed in the driver with
commit bd6f48546b9cb7 ("net: stmmac: dwmac-meson8b: Fix the RGMII TX
delay on Meson8b/8m2 SoCs").
Switch to phy-mode "rgmii-id" to let the PHY side handle all the delays,
(as recommended by the Ethernet maintainers anyways) to correctly
describe the need for a 2ns RX as well as 2ns TX delay on these boards.
This fixes the Ethernet performance on Odroid-C1 where there was a huge
amount of packet loss when transmitting data due to the incorrect TX
delay.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200512215148.540322-3-martin.blumenstingl@googlemail.com
|
|
Add the "timing-adjusment" clock now that we now that this is connected
to the PRG_ETHERNET registers. It is used internally to generate the
RGMII RX delay no the MAC side (if needed).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200512215148.540322-2-martin.blumenstingl@googlemail.com
|
|
Use the Meson8m2 specific USB2 PHY compatible string. The 3.10 vendor
kernel has at least one known difference between Meson8 and Meson8m2:
Meson8m2 sets the ACA_ENABLE bit while Meson8 doesn't.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200515202520.1487514-1-martin.blumenstingl@googlemail.com
|
|
Testing with a USB RNDIS connection and iperf3 gives the following
results:
- From the host computer to the device at ~250Mbit/s
- From the device to the host computer at ~76Mbit/s
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200504195105.2909711-1-martin.blumenstingl@googlemail.com
|
|
The pd_tcpc0 and pd_tcpc1 nodes are currently a sub node of pd_vio.
In the rk3399 TRM figure of the 'Power Domain Partition' and in the
table of 'Power Domain and Voltage Domain Summary' these power domains
are positioned directly under VD_LOGIC, so fix that in 'rk3399.dtsi'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Caesar Wang <wxt@rock-chips.com>
Link: https://lore.kernel.org/r/20200428203003.3318-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Few PDC interrupts do not map to respective parent GIC interrupt.
Fix this by correcting the pdc interrupt map.
Fixes: 22f185ee81d2 ("arm64: dts: qcom: sc7180: Add pdc interrupt controller")
Cc: devicetree@vger.kernel.org
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/1589804402-27130-1-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add IPA-related nodes and definitions to "sc7180.dtsi".
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20200518214939.9730-1-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add a node to define the presence of RGA, a 2D raster graphic
acceleration unit.
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Link: https://lore.kernel.org/r/20200419125134.29923-2-justin.swartz@risingedge.co.za
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Remove the disable-wp attribute from &emmc as it is, according to
Documentation/devicetree/bindings/mmc/mmc-controller.yaml:
"Not used in combination with eMMC or SDIO."
Suggested-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Link: https://lore.kernel.org/r/20200406135006.23759-2-justin.swartz@risingedge.co.za
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Mecer Xtreme Mini S6 features a wireless module, based on a
Realtek 8723BS, which provides WLAN and Bluetooth connectivity via
SDIO and UART interfaces respectively.
Define a simple MMC power sequence that declares the GPIO pins
connected to the module's WLAN Disable and Bluetooth Disable pins
as active low reset signals, because both signals must be deasserted
for WLAN radio operation.
Configure the host's SDIO interface for High Speed mode with 1.8v
I/O signalling and IRQ detection over a 4-bit wide bus.
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Link: https://lore.kernel.org/r/20200406135006.23759-1-justin.swartz@risingedge.co.za
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
'bus-width' and pinctrl containing the bus-pins
should be in the same file, so add them to
all mmc nodes in 'px30.dtsi'.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200416183053.6045-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
There are 2 identical '#include' for 'rk3288-power.h',
so remove one of them.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200403180159.13387-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Current dts files with 'gpio-led' nodes were manually verified.
In order to automate this process leds-gpio.txt
has been converted to yaml. With this conversion a check
for pattern properties was added. A test with the command
below gives a screen full of warnings like:
arch/arm/boot/dts/rk3188-radxarock.dt.yaml: gpio-leds:
'blue', 'green', 'sleep'
do not match any of the regexes:
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Fix these errors with help of the following rules:
1: Add nodename in the preferred form.
2: Always add a label that ends with '_led' to prevent conflicts
with other labels such as 'power' and 'mmc'
3: If leds need pinctrl add a label that ends with '_led_pin'
also to prevent conflicts with other labels.
patternProperties:
# The first form is preferred, but fall back to just 'led'
# anywhere in the node name to at least catch some child nodes.
"(^led-[0-9a-f]$|led)":
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/
leds-gpio.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200428144933.10953-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The mmc-controller.yaml didn't explicitly say disable-wp is
for SD card slot only, but that is what it was designed for
in the first place.
Remove all disable-wp from emmc or sdio controllers.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20191219121954.2450-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Current dts files with 'gpio-led' nodes were manually verified.
In order to automate this process leds-gpio.txt
has been converted to yaml. With this conversion a check
for pattern properties was added. A test with the command
below gives a screen full of warnings like:
arch/arm64/boot/dts/rockchip/rk3368-r88.dt.yaml: gpio-leds:
'work' does not match any of the regexes:
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Fix these errors with help of the following rules:
1: Add nodename in the preferred form.
2: Always add a label that ends with '_led' to prevent conflicts
with other labels such as 'power' and 'mmc'
3: If leds need pinctrl add a label that ends with '_led_pin'
also to prevent conflicts with other labels.
patternProperties:
# The first form is preferred, but fall back to just 'led'
# anywhere in the node name to at least catch some child nodes.
"(^led-[0-9a-f]$|led)":
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/
leds-gpio.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200428144933.10953-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3399-evb.dt.yaml: pd_vio@15:
'pd_tcpc0@RK3399_PD_TCPC0', 'pd_tcpc1@RK3399_PD_TCPC1'
do not match any of the regexes:
'.*-names$', '.*-supply$', '^#.*-cells$',
'^#[a-zA-Z0-9,+\\-._]{0,63}$',
'^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}$',
'^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$',
'^__.*__$', 'pinctrl-[0-9]+'
Fix error by replacing the wrong defines by the ones
mentioned in 'rk3399-power.h'.
make -k ARCH=arm64 dtbs_check
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200428203003.3318-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
A test with the command below this error:
arch/arm64/boot/dts/rockchip/rk3399-orangepi.dt.yaml: phy:
'#phy-cells' is a required property
'phy' is a reserved nodename and should not be used for pinctrl,
so change it to 'gmac'.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200321215423.12176-6-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
A test with the command below gives this error:
arch/arm64/boot/dts/rockchip/rk3399-orangepi.dt.yaml: phy@1:
'#phy-cells' is a required property
The phy nodename is used by a phy-handle.
The parent node is compatible with "snps,dwmac-mdio",
so change nodename to 'ethernet-phy', for which '#phy-cells'
is not a required property
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200321215423.12176-5-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dt.yaml: phy:
'#phy-cells' is a required property
arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dt.yaml: phy:
'#phy-cells' is a required property
arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dt.yaml: phy:
'#phy-cells' is a required property
'phy' is a reserved nodename and should not be used for pinctrl,
so change it to 'gmac'.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200321215423.12176-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
A test with the command below gives these errors:
arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dt.yaml: phy@1:
'#phy-cells' is a required property
arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dt.yaml: phy@1:
'#phy-cells' is a required property
arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dt.yaml: phy@1:
'#phy-cells' is a required property
The rtl8211e node is used by a phy-handle.
The parent node is compatible with "snps,dwmac-mdio",
so change nodename to 'ethernet-phy', for which '#phy-cells'
is not a required property.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200321215423.12176-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
A test with the command below gives this error:
arch/arm64/boot/dts/rockchip/rk3328-a1.dt.yaml: phy@0:
'#phy-cells' is a required property
The rtl8211f node is used by a phy-handle.
The parent node is compatible with "snps,dwmac-mdio",
so change nodename to 'ethernet-phy', for which '#phy-cells'
is not a required property.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200321215423.12176-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: phy@0:
'#phy-cells' is a required property
The phy nodename is normally used by a phy-handle.
This node is however compatible with
"ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"
which is just been added to 'ethernet-phy.yaml'.
So change nodename to 'ethernet-phy' for which '#phy-cells'
is not a required property
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200321215423.12176-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Rockchip dtsi and dts files have been bulk-converted for the
remaining raw gpio numbers into their descriptive counterparts and
also got rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x
mappings, so remove the unused defines in 'rockchip.h' to prevent
that someone start using them again.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200512203524.7317-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The defines RK_FUNC_1 and RK_FUNC_2 are deprecated,
so replace them with the preferred form.
Restyle properties in the same line.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200512203524.7317-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The lack of unique context in '0f1decaa83b7 ("arm64: dts: qcom: sc7180:
Support ETMv4 power management")' caused the patch to be applied
off-by-one. Move the "arm,coresight-loses-context-with-cpu" properties
down one node, so that it applies to the ETMs and not the replicator.
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The SRAM DT binding requires child nodes to use a certain node name
scheme.
Change the naming from scp-shmem to scp-sram to comply with that.
Link: https://lore.kernel.org/r/20200513103016.130417-19-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The common LED binding wants the LED node names to start with led- and
then have just a single number.
Changing the naming for the 8 user LEDs from using user<x> to led-<x>.
Also there is no default-trigger named "mmc0" in the kernel, so use the
more generic "disk-activity".
Link: https://lore.kernel.org/r/20200513103016.130417-18-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The Mali binding insists on the GPU interrupts to be in ordered as: job,
mmu, gpu.
Sort the GPU interrupts and interrupt-names properties accordingly.
Link: https://lore.kernel.org/r/20200513103016.130417-17-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Most Arm Ltd. boards are employing a layered bus structure, to map
the hardware design (SoC, motherboard, IOFPGA) and structure the DTs.
The "simple-bus" nodes only allow a limited set of node names. Switch
to use *-bus to be binding compliant.
This relies on a pending dt-schema.git fix for now:
https://github.com/devicetree-org/dt-schema/pull/38
Link: https://lore.kernel.org/r/20200513103016.130417-16-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The SMMU name in the RevC FVP DT file was not fully binding compliant.
Adjust the node name to match the binding's list of allowed names, also
shuffle the order of the interrupts to comply with the expected order.
Link: https://lore.kernel.org/r/20200513103016.130417-15-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The UARTs for all Arm Ltd. boards were using "uart" as their node name
stub.
Replace that with the required "serial" string, to comply with the PL011
DT binding.
Link: https://lore.kernel.org/r/20200513103016.130417-14-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The EHCI/OCHI DT binding requires to use "usb" as the node name stub.
Replace the existing name with "usb" to comply with the binding.
Link: https://lore.kernel.org/r/20200513103016.130417-13-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The sama5d2 SoC has two dedicated I2C IPs that are enabled on
sama5d2_xplained. Add alias for the i2c devices to not rely on
probe order for the i2c device numbering.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20200518114802.253660-1-tudor.ambarus@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
This adds touchscreen support to the Ux500 Samsung
GT-S7710 "Skomer" mobile phone.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200516212913.485365-1-linus.walleij@linaro.org
|
|
The GIC ITS nodes in the fastmodel DTS files were not fully binding
compliant.
Use one of the allowed node names, also add the required #msi-cells
property for the older model.
Link: https://lore.kernel.org/r/20200513103016.130417-12-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The GIC DT nodes for the fastmodels were not fully compliant with the
DT binding, which has certain expectations about child nodes and their
size and address cells values.
Use smaller #address-cells and #size-cells values, as the binding
requests, and adjust the reg properties accordingly.
This requires adjusting the interrupt nexus nodes as well, as one
field of the interrupt-map property depends on the GIC's address-size.
Since the .dts files share interrupt nexus nodes across different
interrupt controllers (GICv2 vs. GICv3), we need to use the only
commonly allowed #address-size value of <1> for both.
Link: https://lore.kernel.org/r/20200513103016.130417-11-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The GIC DT nodes for the Juno boards were not fully compliant with
the DT binding, which has certain expectations about child nodes and
their size and address cells values.
Use smaller #address-cells and #size-cells values, as the binding
requests, and adjust the reg properties accordingly.
This requires adjusting the interrupt nexus nodes as well, as one
field of the interrupt-map property depends on the GIC's address-size.
Link: https://lore.kernel.org/r/20200513103016.130417-10-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The GIC DT binding only allows certain combinations of DT compatible
strings. The somewhat awkward "arm,cortex-a15-gic", "arm,cortex-a9-gic"
is not among those.
Drop that combination of different "cortex" based strings used for the
models, and replace it with the more useful combination including
"arm,gic-400".
Link: https://lore.kernel.org/r/20200513103016.130417-9-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The Juno's mem-timer DT node was not fully compliant with the DT binding,
which has certain expectation about child nodes and their size and
address cells values.
Use a cell size of 1, as the binding requests, and spell out the ranges
property to be binding compliant.
Link: https://lore.kernel.org/r/20200513103016.130417-8-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The devicetree compiler complains when DT nodes without a reg property
live inside a (simple) bus node:
Warning (simple_bus_reg): Node /bus@8000000/v2m_refclk32khz
missing or empty reg/ranges property
Move the fixed clocks, the fixed regulator, and the gpio keys to the
root node, since they do not depend on any busses.
Link: https://lore.kernel.org/r/20200513103016.130417-7-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The devicetree compiler complains when DT nodes without a reg property
live inside a (simple) bus node:
Warning (simple_bus_reg): Node /bus@8000000/v2m_refclk32khz
missing or empty reg/ranges property
Move the fixed clocks to the root node, since they do not depend on any
busses.
Link: https://lore.kernel.org/r/20200513103016.130417-6-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The devicetree compiler complains when DT nodes without a reg property
live inside a (simple) bus node:
Warning (simple_bus_reg): Node /bus@8000000/motherboard-bus/refclk32khz
missing or empty reg/ranges property
Move the fixed clocks, the fixed regulator, the leds and the config bus
subtree to the root node, since they do not depend on any busses.
Link: https://lore.kernel.org/r/20200513103016.130417-5-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The sfp compatible should be 'sff,sfp', not 'sff,sfp+'. We used patched
kernel where the latter was working.
Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The devicetree compiler complains when DT nodes without a reg property
live inside a (simple) bus node:
Warning (simple_bus_reg): Node /bus@8000000/motherboard-bus/v2m_refclk32khz
missing or empty reg/ranges property
Move the fixed clocks, the fixed regulator, and the config bus subtree
to the root node, since they do not depend on any busses.
Link: https://lore.kernel.org/r/20200513103016.130417-4-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
